. One end of a uniform wire of length Land of weight Wis attached rigidly to a point in the roof and a weight Wis suspended form its lower end. If 'S' is the area of cross- section of the wire, then find the stress in the wire at height (3L/4) from its lower end ? 1) 3) w₁ +(3w/4) 1 S W₁ + W 4 2) 4) w+(3w₁/4) S 3w₁ + (w/4) S​

Answers

Answer 1

To find the stress in the wire at a height of 3L/4 from its lower end, we need to calculate the force acting on the wire at that point. The force on the wire is equal to the weight of the wire itself and the weight of the object suspended from it. Therefore, non of the option is correct.

How is Stress calculated?

The weight of the wire is given by the equation: W = gL, where g is the acceleration due to gravity and L is the length of the wire.

The weight of the object suspended from the wire is given by the equation: W1 = gL1, where L1 is the distance from the point of attachment to the object.

Therefore, the total force acting on the wire at a height of 3L/4 from its lower end is:

F = W + W1 = gL + g(L - 3L/4) = gL + 3gL/4 - 3gL/4 = gL

The stress in the wire is given by the equation: stress = F/S, where S is the cross-sectional area of the wire.

Substituting the values for F and S, we get:

stress = (gL)/S

Therefore, the stress in the wire at a height of 3L/4 from its lower end is (gL)/S.

None of the given options match this result, so the correct answer is not among the choices provided.

Learn more about stress here: https://brainly.com/question/154477

#SPJ1


Related Questions

mols
ersion
nd
and
=
nd
ergy
Satellite
Balance
icity
Motion
Sound
Color
and
Analyze this: A 238.6-N force is applied at an angle of 18.8° above the horizontal
to accelerate a 14.5-kg object across a level surface. The coefficient of friction is
0.247. Complete the diagram.
H=
Units
Force: N
Mass: kg
Accel'n: m/s/s
Tap on a field to enter or edit its value.
0.247
Fnorm=
=Ffrict
Fgrav =
m=
a=
142.1
14.5
Fx
Fapp=
Fy
Fx =
Fy=
238.6
Pro
Tap for Question-Sp
Help Me

Answers

Answer:

Minus the components

Explanation:

= minus components and figratives = answer 2 4

the centers of two slits of width a are a distance d apart. if the fourth minimum of the interference pattern occurs at the location of the first minimum of the diffraction pattern for light of wavelength λ, the ratio a/d is equal to:____.

Answers

centers of two slots of width an are separated by this amount. If the initial minimum of the diffraction peak of light of wavelength is where the fourth minimum of the interferometer is located, then the ratio a/d is equal to 2/7.

The wavelength, what is it?

A waveform signal's wavelength is defined as the separation between two similar points (adjacent crests) in adjacent cycles as the signal travels through space or along a wire. This length in wireless systems is typically expressed in metres (m), centimeters (cm), or millimeters (mm) (mm).

What exactly are wavelengths and frequencies?

The wavelength is indeed the distance that separates two wave crests, while troughs have the same wavelength. The number of oscillations which pass over a specific place in a second is known as the frequency and is expressed in seconds of cycles (Hz) (Hertz).

TO know more about wavelengths  visit:

https://brainly.com/question/13533093

#SPJ4

the movement of earthy materials from higher region to lower region due to gravitational pull is called

Answers

Landslides are caused by earthy elements moving from higher to lower areas as a result of gravity. The sliding down of a slope of a volume of rock, rubble, or earth is known as a landslide.

What creates the attraction of gravity?

All things with mass, including our Earth, really bend and curve spacetime, which is what causes gravity to pull you toward the ground. What you experience as gravity is that curvature.

What term best represents the pull of gravity?

A mass attracts a mass; the amount of the gravitational force is direct proportion to the masses of both the two items and inverse to the square of both the distance between two pieces. Gravitational force is an electrostatic attraction and exists among the objects with mass.

To know more about gravitational pull visit:

https://brainly.com/question/13467280

#SPJ4

13. Squids and octopuses take in water and forcibly expel it through the
siphon in a sudden spurt that pushes them through the water. This
propulsion is an example of which Newton's Law?
A. 1st Law
B. 2nd Law
C. 3rd Law
D. All of Newton's Laws

Answers

Squids and octopuses forcefully expel water through the siphon after ingesting it, propelling themselves through the water. Third Law of Newton.

Describe the third law of Newton's law?

His third law asserts that there is an opposite and an equal response in nature for every action (force). When an object A pulls on an object B, the opposite force is applied to the first object by object B. Alternatively said, interactions lead to forces.

What are examples of the third law of Newton?

There are numerous real-world applications of Newton's third motion law. For instance, when you leap, the earth exerts an equal and opposing reaction force that propels you into to the air. This is because when you apply a force to it with your legs, it responds in kind. Rockets and other projectiles are designed using Newton's third law by engineers.

To know more about  third law of Newton visit:

https://brainly.com/question/29768600

#SPJ1

racquetball strikes a wall with a speed of 30 m/s and rebounds with a speed of 26 m/s. the 189) collision takes 20 ms. what is the average acceleration of the ball during the collision?

Answers

The acceleration of the racquetball during the collision is found to be 1330m/s².

According to the second law of motion proposed by Newton the force on the body is equal to the change in momentum per unit time of the body.

So, we can write,

Ma = M∆V/t

Where,

M is the mass of the body is the,

a acceleration of the body,

∆V is the change in speed of the body after the collision,

t is the time taken during the collision.

It is given to us that the racquetball strikes the wall with a speed of 30m/s and it rebounds with the speed of 26 m/s the collision time is 20 milli seconds.

Putting the values,

a = 30-(-26)/0.02

a = 1330m/s².

So, the acceleration of the racquetball is 1330m/s².

To know more about acceleration, visit,

https://brainly.com/question/605631

#SPJ4


Disk Y of rotational inertia ly=(1/2)MY(RY)^2 about its center is held at rest above disk X of rotational inertia Ix=(1/2)Mx(RY)^2 about its center. Disk
X initially rotates about its center with an angular velocity of +w0. Disk Y is then slowly lowered onto disk X until both disks are in contact and rotate
together with a common angular velocity. Which two of the following predictions are correct about the angular momentum of disk X and disk Y
immediately before and after the rotational collision? Select two answers.
The angular momentum of disk X immediately after the collision is greater than the angular momentum of disk X immediately before the
collision.
The angular momentum of disk Y immediately after the collision is greater than the angular momentum of disk Y immediately before the
collision.
The angular momentum of disk Y immediately after the collision is greater than the angular momentum of the disk X-disk Y system
immediately before the collision.
The angular momentum of the disk X-disk Y system immediately after the collision is equal to the angular momentum of the system
immediately before the collision.

Answers

The statements that are true are

The angular momentum of disk Y immediately after the collision is greater than the angular momentum of disk Y immediately before the collision.The angular momentum of the disk X-disk Y system immediately after the collision is equal to the angular momentum of the system immediately before the collision.

What is angular momentum?

Angular momentum is the product of the rotational inertia and angular speed of a rotating object.

How to find which statements are true about the angular momentum

Let

I₁ = initial angular momentum of disk X = Ixω₀ where Ix = rotational inertia of disk x and ω₀ = angular velocity of disk y, I₂ = initial angular momentum of disk Y = 0 (since it is initally stationary) where I₃ = final angular momentum of disk x = Ixω and I₄ = final angular momentum of disk Y = Iyω where Iy = rotational inertia of disk y and ω = their common angular velocity after the collision

From the law of conservation of angular momentum, we have that

initial angular momentum equals final angular momentum

So, I₁ + I₂ = I₃ + I₄

Ixω₀ + 0 = Ixω + Iyω

Ixω₀ = Ixω + Iyω

From the above, we see that

Since I₄ > I₂ = 0,

The angular momentum of disk Y immediately after the collision is greater than the angular momentum of disk Y immediately before the collision.

Also, since I₁ + I₂ = I₃ + I₄,

The angular momentum of the disk X-disk Y system immediately after the collision is equal to the angular momentum of the system immediately before the collision.

So, the statements that are true are

The angular momentum of disk Y immediately after the collision is greater than the angular momentum of disk Y immediately before the collision.The angular momentum of the disk X-disk Y system immediately after the collision is equal to the angular momentum of the system immediately before the collision.

Learn more about angular momentum here:

https://brainly.com/question/28184557

#SPJ1



object's velocity will not change unless it is acted on by a(n)
O net force.
O strong force.
O unbalanced force.
O opposite but equal force

Answers

Answer: C. Unbalanced Forced
Reasoning: Newton’s First Law of Motion (The Law of Inertia)

A weightlifter lifts a 20 kg barbell a distance of 0.4 m in 0.82 s. How much power is demonstrated by the lift?

Answers

95.60 watt much power is demonstrated by the lift.

What is power?

Energy consumption per second is measured as power. The amount of force necessary to create a unit displacement is another way to quantify power. Power, a scalar quantity, is represented by the letter P. For instance, a light bulb with 100 W of electricity will provide more light than one with 10 W.

Given that,

weight (W) = 20 Kg

distance = 0.4 m

time (t) = 0.82 sec

As we know,

Power (P) = W/t

or, P = (20 kg × 9.8 × 0.4)/ 0.82

or, P = 95.60 watt

Thus, 95.60 watt much power is demonstrated by the lift.

To know more about power refer to:

https://brainly.com/question/1634438

#SPJ1

a roller coaster car is initially at rest at the top hill of its track. the car descends the frictionless track and acquires a speed of 10 m/s when it reaches bottom of the hill. find the speed of the car when it is half-way down the hill?

Answers

The speed of the car when it is half –way down the hill is 7m/s.

This is another illustration of energy conservation. Set the potential energy at the top to equal the kinetic energy at the bottom, then solve for height h and then  speed using the same total energy at h/2.

Top:

mgh = (1/2)mv2

hear m=mass

        h=Hight

        v= speed

       

gh = v2/2

h = v2/(2g)

= 102/[2(9.8)] m

= 5.1 m

Half way down:

u = speed

g(h/2) = u2/2

u = √[2g(h/2)]

= √(gh)

= √[(9.8)(5)] m/s

= 7.0 m/s

What is Kinetic energy?

the energy that an object produces as a result of its motion. There is unquestionably a need to apply particular forces when an object is prepared to accelerate. Applying force requires work, and once the job is finished, energy is transmitted to the object, causing it to move with a constant speed.

To know more about kinetic energy, visit to

https://brainly.com/question/114210

#SPJ4

calculate the maximum speed that the car can have without losing contact with the road at the top of the hill

Answers

The maximum speed that the car can have without losing contact with the road at the top of the hill of radius 50m is 22.14 m/s.

We need to apply the concept of centripetal force, force of gravity that produces the weight and the balance of these two, in order to solve this problem.

The force of weight must be equal to the centripetal force so that the weight must be equal to centripetal force.

∑ F = 0

Fc - Fw = 0

Fc = Fw

mg = mv²/r

where, m is mass

v is velocity

r is radius

Making v as subject, we have, v = √(g * R)

v = √(g * R) = √( 9.8 * 50) = 22.14 m/s

Thus, the velocity of the car that it can have without losing contact with the road is 22.14 m/s.

To know more about speed:

https://brainly.com/question/14466621

#SPJ4

In a uniform motion
- Acceleration is non zero constant
- Direction of velocity may vary
- Speed is not constant
- Velocity and speed are constant

Answers

Answer:

pls mark as brainliest

Explanation:

Velocity and speed is constant

A cat is running at 4.65 m/s and has 91.7 J of kinetic energy. What is the cats mass

Answers

To find the mass of the cat, you can use the formula for kinetic energy, which is:

KE = (1/2) * m * v^2

where KE is the kinetic energy, m is the mass, and v is the velocity.

You can rearrange this formula to solve for mass:

m = (2 * KE) / v^2

Plugging in the values given, you get:

m = (2 * 91.7 J) / (4.65 m/s)^2

Solving this equation gives a mass of approximately 2.07 kilograms.

Thermogenesis has been studied the plants in the genus arum, including skunk cabbage and the corpse flower. In these plants, what hypotheses have been provided to explain the reason behind thermogenesis? select all that apply.

Answers

Thermogenesis has been studied the plants in the genus arum, including skunk cabbage and the corpse flower. In these plants, these hypotheses have been provided to explain the reason behind thermogenesis

protection from frost damageleaf production and photosynthesis.seed germination.What is Thermogenesis?

Thermogenesis, which takes place in specialised tissues such brown adipose tissue and skeletal muscle, is described as the disposal of energy through the generation of heat.

All metabolic activities involved in keeping the organism in a live condition require mandatory thermogenesis, which takes place in all organs. It also includes the energy used when food is consumed, digested, and processed (thermic effect of food, or TEF).

Thus, the reason behind thermogenesis are:

protection from frost damageleaf production and photosynthesis.seed germination.

To know more about thermogenesis refer to:

https://brainly.com/question/28921006

#SPJ1

A passenger on an airplane flying across the Atlantic receives an extra radiation dose of about 5 μSv per hour from cosmic rays. Assume there are no other significant radiation sources besides natural background. Suppose that the natural background exposure in a year is 3 mSvHow many hours of flying would it take in one year for a person to double his or her yearly radiation dose?Answer in hr please

Answers

The person needs to fly 600 hours to double his radiation.

What is radiation?

Radiation is the  energy that is  comes from a source and it is  travels through the  space at the speed of light.

The passenger on to the  airplane gets an extra dose to the  of five microsieverts and per hour when his plane is flying across the Atlantic. We want to know when one  person should apply in the  double. His early radiation is to  good. The person gets a radiation dose due to the  background radiations. Background radiations are the  what this is about. There are no way to double they can do the irradiation. Does it  the person need a lot of time hours to fly? We can definitely find a number of the  hours by using the relation gee of total doors to  that need to be received extra divided by that power. The double layer radiation of the  was added to our Essen. Does the person need to receive an extra dose of the

extremely sure barrier from to a  the Cosmic Radiations as a person is receiving the  radiation at a rate of five of  Microsoft word barrier from Cosmic Radiations? We can be  write this as two equal to three giant standard of the  power minus three c. Your to  support and Seaworld will be deleted from to the   numerator and denominator of  disk. It will do that if we use it.

Thus ,The person needs to to  be  fly 600 hours to double his radiation.

To know more about radiation click-

https://brainly.com/question/1578259

#SPJ1

calculate the change in entropy of 3 moles of liquid water if you heat it from 5Ëšc to 95Ëšc. the molar heat capacity of liquid water is 75.38 j/molk.

Answers

Water in liquid form has an entropy change of 63.4 J/K.

define entropy ?

A state of disorder, randomness, or uncertainty is most frequently associated with the scientific concept of entropy, which is also a quantifiable physical property. From classical thermodynamics, where it was first recognized, to the microscopic description of nature in statistical physics, to the fundamentals of information theory, the term and concept are used in a variety of disciplines. It has wide-ranging uses in physics and chemistry, biological systems and how they relate to life, cosmology, economics, sociology, weather science, and information systems, including the transmission of information through telecommunication.

We use the equation to determine the entropy change for the same phase at various temperatures:

ΔS=n x Cp x In(T₂/T₁)

ΔS=3 x 75.38 x In (368/27)

ΔS= 63.4 J/k

therefore the entropy change of the water is  63.4J/k

To learn more about entropy follow the given link:https://brainly.com/question/104730

#SPJ1

A 2-meter-long pendulum, is set in motion, at 1.2 m/s, when the pendulum arm is at an angle of 25° from the vertical. Find the speed of the pendulum when it reaches the bottom of its swing.

Answers

ANSWER: Approximately 2.17 m/s.

EXPLANATION: Using the equations of motion for a pendulum, you can calculate the velocity of the pendulum at the bottom of its swing as follows:

v = √(gL(1 - cos(θ)))

Where:
v is the velocity of the pendulum at the bottom of its swing

g is the acceleration due to gravity (9.8 m/s^2)

L is the length of the pendulum (2 meters)

θ is the angle of the pendulum at the top of its swing (25°)

Substituting these values into the equation gives:

v = √(9.8 * 2 * (1 - cos(25°)))

Solving this equation gives a velocity of approximately 2.17 m/s. This is the speed of the pendulum at the bottom of its swing.

a guitar string is fixed at both ends. if you tighten it to increase its tension

Answers

a guitar string is fixed at both ends. if you tighten it to increase its tension the frequencies of its vibrational modes will increase but its wavelengths will not be affected.

Stretching a string between two points, as in a stringed instrument, will cause tension on the string. Tension is the degree of stretching that is applied to the string. As the string is tightened, the frequency rises; as the string is loosened, the frequency falls. Strings are tightened or loosened by string musicians to change the pitches of their instruments.

We are aware that a tight string's frequency is determined by

v=√(T/μ)

where c is the frequency of sound wave T is tension and μ is mass per unit length

and velocity is provided by

v=νλ

As  increases v also increase ν but wavelength  remain same because ends of string are fixed.

your question is incomplete but most probably the full question was

Guitar string is fixed at both ends. If you tighten it to increase its tension (explain your answer):

a) the frequencies of its vibrational modes will increase but its wavelengths will not be affected.

b) both the frequency and the wavelength increase.

c) the wavelength increases but the frequency is not affected.

learn more about frequency here: https://brainly.com/question/3172387

#SPJ4

multiple choice
15) A coiled spring used to help a door close has ________ ________energy when the door is open.

16) After braking, a bicycle's tires increase in temperature as friction causes some of the
mechanical energy to transfer to ________ energy.

Answers

A coiled spring which is used to close a door ,aquires elastic potential energy when the door is open.After braking , the mechanical energy gets converted into thermal energy resulting in increased temperature of the tires.What is the Law of conservation of energy?

According to conservation of energy, the energy of interacting bodies in a closed system remains constant. The total energy of an isolated system remains constant; it is said to be conserved over a period of time.

Elastic energy is the mechanical implicit energy stored in the configuration of a material or physical system as it's subjected to elastic distortion by work performed upon it. Elastic energy occurs when objects are impermanently compressed, stretched or generally misshaped in any manner.

The mechanical energy is never lost forever , rather it gets converted to thermal energy because of the friction .

To know more about Law of conservation of energy ,visit:

https://brainly.com/question/29775341

#SPJ1

Based on this model, how much of the energy will the tertiary consumers receive if the primary consumers have 3600 joules of energy?.

Answers

If the primary consumers have 3600 joules of energy, the tertiary consumers receive 36 joules energy.

What is 10 percent law of energy transfer?

The ten percent law was proposed by Lindemann (1942) to explain how energy moves from one trophic level to the next. The law states that only around 10% of the organic substance that is transferred from one trophic level to the next of food is stored as flesh.

The rest is either lost in the transfer process or destroyed during breathing. Only 10% of the energy used by plants for primary production can be stored as net production that is available to herbivores. 10% of the energy in the food gets fixed into animal flesh when plants are eaten by animals, making it available for the next trophic level (carnivores). Only around 10% of the animal's energy is stored in its meat for the higher level when it is eaten by a predator.

So,  If the primary consumers have 3600 joules of energy, the  tertiary consumers receive 3600×10%×10% joules = 36 joules of energy.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

in a region of space where gravitational forces can be neglected, a sphere is accelerated by a uniform light beam of intensity 8.0 mw/m2. the sphere is totally absorbing and has a radius of 1.0 microns and a uniform density of 4500.0 kg/m3. what is the magnitude of the sphere's acceleration (in m/s2) due to the light?

Answers

The answer for the magnitude of the sphere's acceleration (in m/s²) due to the light is 4.44×10⁻⁹ m/s²

Newton's second law must be applied in order to determine the acceleration.

F = m×a and a = F/m.

We use the defined pressure and the radiation pressure for an absorbent surface to determine the force.

P=I/c absorbent surface

P = F / A

F / A = I / c

F = I A / c

A circle's total area is

     A = π×r²

We swap out

F = I π r² / c

Let's compute

F = 8.0×10⁻³ π (1.0×10⁻⁶)²/3×10⁸

F = 8.375×10⁻²³ N

To measure Density

     ρ = m / V

     m = ρ V

     m = ρ (4/3 π r³)

     m = 4500 (4/3 π (1×10⁻⁶)³)

     m = 1,885×10⁻¹⁴ kg

Now let's determine the acceleration.

    a = 8.375×10⁻²³ / 1.885×10⁻¹⁴

    a = 4.44×10⁻⁹ m/s² absorbent surface

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

One important way astronomers can learn in some detail about what happens when galaxies collide is.

Answers

Astronomers can learn to simulate the galaxy's collisions on a large computer and watch what the simulation will predict.

What is a galaxy?

A galaxy can be described as a system of stars, interstellar gas, dust, and dark matter, bound together by gravity. Galaxies from 100 million stars range in size from dwarf to million stars to the largest galaxies known as supergiants.

Most of the mass in a galaxy is in the form of dark matter, with only a few percentages of that mass visible as stars and nebulae. Supermassive black holes are a common characteristic at the centers of galaxies.

Galaxies can be categorized according to their visual morphology as elliptical, spiral, or irregular. The Milky Way's central black hole or Sagittarius A* has a mass 4 million times greater than the Sun.

Learn more about galaxy, here:

https://brainly.com/question/24836631

#SPJ1

today, astronomers find compelling evidence that the energy source of the quasars and active galaxies is:_____.

Answers

The energy source of quasars or active galaxies is currently thought to be matter falling toward a massive black hole in the center of a galaxy, according to persuasive evidence discovered by astronomers.

How does science define energy?

The definition of energy is "capacity to do activity, which is ability to apply force causing motion of an object." Energy is simply the force that moves objects, despite this definition's seeming complexity. Both potential and kinetic energy fall under this category.

what is The importance of energy

Due to the fact that it is a fundamental human requirement, energy is crucial to our daily existence. Our constructions, which are constructed by humans, are heated and cooled by energy. Even the simplest tasks like lifting your finger or getting out of bed require energy.

To know more about energy  visit:

https://brainly.com/question/1932868

#SPJ4

How does Physics connect to the Greenhouse Effect?

Answers

Answer: The greenhouse effect is caused by certain gases in the Earth's atmosphere trapping heat from the sun, which leads to climate change. Physics plays a role in understanding this phenomenon and developing solutions to mitigate its effects.

Explanation:

The angular momentum of the propellers of a small airplane points directly forward from the plane. Part A In what direction do the propellers rotate as seen from the rear of the plane? Clockwise Counterclockwise None of the above Submit Request Answer Part B If the plane is flying horizontally and suddenly pulls upward, in which direction does the nose of the plane tend to move? The nose of the plane would veer upward. The nose of the plane would veer to the left. The nose of the plane would veer downward. The nose of the plane would veer to the right. Submit Request Answer

Answers

In clockwise direction the propellers rotate as seen from the rear of the plane. If the plane is flying horizontally and suddenly pulls upward, the nose of the plane would veer upward. The correct options are B and A respectively.

The propellers rotate anticlockwise when viewed from the back of the aircraft.

When observed from the rear, an anticlockwise rotation direction corresponds to propellers spinning in the forward direction because the angular momentum of the propellers points directly forward from the plane.

The nose of a plane tends to pull forward when a plane flying horizontally suddenly pulls upward. This is brought on by the direction of the lift force produced by the wings changing.

By raising the nose, the angle of attack widens, increasing the lift force that raises the plane's nose upward. The change in the aerodynamic forces exerted on the aircraft is what causes the nose to rise upward.

Thus, the correct options are B and A respectively.

For more details regarding aircraft, visit:

https://brainly.com/question/32264555

#SPJ12

Your question seems incomplete, the probable complete question is:

The angular momentum of the propellers of a small airplane points directly forward from the plane. Part A In what direction do the propellers rotate as seen from the rear of the plane?

A. Clockwise

B. Counterclockwise

C. None of the above

Part B If the plane is flying horizontally and suddenly pulls upward, in which direction does the nose of the plane tend to move?

A. The nose of the plane would veer upward.

B. The nose of the plane would veer to the left.

C. The nose of the plane would veer downward.

D. The nose of the plane would veer to the right.

An external force of 5 n is applied to a 10 kg object over a time of 3 s. Determine the impulse of the object.

Answers

The impulse of the 10kg object is 15Ns.

How to calculate impulse?

Impulse is the integral of force over time. The impulse of an object in physics is a term that is used to describe or quantify the effect of force acting over time to change the momentum of an object.

It is represented by the symbol J and usually expressed in Newton-seconds or kg m/s.

According to this question, an external force of 5N is applied to a 10kg object over a time of 3 s. The impulse can be calculated as follows:

Impulse = 5N × 3s = 15Ns

Therefore, 15Ns is the impulse of the object.

Learn more about impulse at: https://brainly.com/question/2193212

#SPJ1

If magnets are knocked around a lot or heated, their magnetism will be reduced or lost. Explain why.

Answers

Answer:

so heating a magnet disrupts the domain walls and it becomes easy for the magnet to become ordinarily misaligned and rotate. so when that happens they are now less aligned and point in the opposite direction to the neighbors causing a decrease in the magnetic field and loss of magnetism

how much work must be done on a particle with a mass of mm to accelerate it from rest to a speed of 0.083 cc ? express your answer in terms of mc2mc2 .

Answers

A atom with a size of mm needs to perform work equal to 0.68 mc2 in order to acceleration it from rest to something like a velocity of 0.083 cc.

What is an explain acceleration?

The rate about which direction of velocity change over time is referred to as acceleration. It is said to be escalating when it starts to move quickly or slowly.

What three forms of acceleration are there?

The three main types of propelled motions are homogeneous acceleration, non-uniform kinetic energy, and average acceleration. The motion in which an item moves in a linear fashion while increasing in velocity at regular intervals is referred to as uniform acceleration.

Briefing:

as a mass particle's kinetic energy is,

KE = mc²( - 1 ) ............1

last KE = mc2 (1.68 - 1 )

final KE = 0.68mc²

W = final KE - initial KE

Work = 0.68 mc²

To know more about acceleration visit:

https://brainly.com/question/2303856

#SPJ4

A car is moving at 30.0 m/s, east in a straight line approaching the red traffic light as shown. The
time it takes for the car to stop is .6 seconds.

What is the acceleration of the car?

Answers

Answer:

–5

Explanation:

u = 30m/s , v = 0(comes to a stop) , t = 6s, a = ?

a = v – u/t

a = 0 – 30/6

a = –30/6

a = –5

A car is moving at 30.0 m/s, east in a straight line approaching the red traffic light as shown. The time it takes for the car to stop is 0.6 seconds. The acceleration of the car is -5 m/s.

What is speed?

Speed is defined as the pace at which an object's location changes in any direction. The distance traveled in relation to the time it took to travel that distance is how speed is defined.

Given

u = 30m/s ,

v = 0(comes to a stop) ,

t = 6s

To calculate acceleration we use formula

a = v – u/t

a = 0 – 30/6

a = –30/6

a = –5 m/s

Thus, a car is moving at 30.0 m/s, east in a straight line approaching the red traffic light as shown. The time it takes for the car to stop is 0.6 seconds. The acceleration of the car is -5 m/s.

To learn more about speed, refer to the link below:

https://brainly.com/question/28224010

#SPJ2

2c. Explain why the diversity changes in the different successional stages.
[2 marks]

Answers

Increased availability of nutrients due to changes in soil composition leads to the emergence of new leaves, which boosts diversity.

How does biodiversity change through the stages of ecological succession?

The variety of species found in an ecosystem is known as its biodiversity. The evolution of organisms following a catastrophe that wipes out an environment is known as ecological succession. Ecological succession boosts biodiversity by expanding the variety of species that exist in a region.

Site characteristics, the kind of events that start succession, interactions between the species present, and more stochastic elements, such the availability of propagules or the weather at the time of disturbance, can all have an impact on the course of successional change.

Ecological succession is the process by which a region's species and habitat mix changes over time. Until a "climax community," such as a mature forest, is reached or until a disruption, such as a fire, occurs, these communities gradually replace one another.

To learn more about ecological succession refer to :

https://brainly.com/question/10167897

#SPJ1

two small objects each with a net charge of q exert a force of magnitude f on each other. two charges q, with equal and opposite forces f we replace one of the objects with another whose net charge is 4q: two charges, q and 4q the original magnitude of the force on the q charge was f; what is the magnitude of the force on the q charge now?

Answers

When one of the Charges Q is swapped out for another charge 4Q, there is a force on Q that is 4F strong.

Coulomb's equation of electricity states that the amount of the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance separating the two charges.

Calculation:

Mathematically, F = KQ₁Q₂ /d²

The coulombs law equation gives the magnitude of the force between the items, F, if the initial charges on the two objects are each equal to Q and the distance between the charges is d. i.e. F = KQQ/d².

The force between the charges will now be given as follows if one of the charges is swapped out for a charge 4Q:

F` = KQ₄Q / d²

F` = 4 × KQQ / d²

Comparing the force's initial and ultimate magnitude on the objects

F' = 4F.

To know more about Coulombs law visit:-

https://brainly.com/question/29124480

#SPJ4

Question:

Two small objects each with a net charge of Q (positive) exert a force of magnitude F on each other. We replace one of the objects with another whose net charge is 4Q. The original magnitude of the force on the Q charge was F; what is the magnitude of the force on the Q now?

A. 16F

B. 4F

C. F

D. F/4

Other Questions
taking an entry-level position makes it difficult to advance in a career you want to explore. true or false? Convert 7/21 to degrees. A ____ represents a sensory part of the surface of the body that is innervated by a single spinal nerve. Math probability question a car is traveling at 50 mph due south at a point 1 mile north of an intersection. a police car is traveling at 40 mph due west at a point 1 mile east of the same intersection. at that instant, the radar in the police car measures the rate at which the distance between the two cars is changing. what does the radar gun register? What is the value of f(x) = 1/2x + 5 when x = 4? Which group gained new food staples including corn and potatoes from theColumbian Exchange?EuropeansNative Americans Which word has the meaning most similar to manipulate technician a says that with a manual transmission, output shaft speed and torque can be increased at the same time. technician b says that output shaft speed and torque can be increased, but not at the same time. who is correct? Tyler eat 6 crackers for a snack each weekday. On Friday, he drops 3 and only eats 3. What is the total number of crackers Tyler eats during the week? What was the main resource France wanted in N. America? What is the term associated with the types of atoms in a mineral?Responsesionic bondaggregatecrystal structurechemical composition The _____ sector of our economy has been shrinking due in part to globalization and technology. Synchondroses unite bones with ________ while symphyses unite bones with ________. the textbook describes six hr management practices that support higher levels of aircraft productivity, staffing productivity, and service quality. match each of the six key hr management practices to the correct explanation. In which of the following cases would you expect the LEAST amount of flooding due to a rainstorm? Assume all areas receive similar amounts of rainfall in the rainstorm and there are no flood control measures in any of the areas.A long duration rainstorm falling on an area that consists of forest, grasslands, and no human development. Select the equation of a line with a slope of 5 that passes through the point (2, 3). Multiple choice question.cross outA)y=5x 13 cross outB)y=5x 3 cross outC)y=5x+7 cross outD)y=5x+2 anet constantly washes her hands. She must keep them clean as she fears that without these seventy to eighty daily washes she will catch some types of disease. Janet is displaying symptoms associated with disorder which organization, representing 90 percent of the world economy, aims to bring greater stability to the global financial system? Find the total snowfall for this year if it snowed 1/10 inch in November, 2 1/5 inches in December and 1 3/4 inches in January.