Need answers asap pls and thank you. Work shown.

A good tutor will be correct in saying that velocity and acceleration are different concepts. The correct option is A.

Velocity and acceleration are distinct concepts in physics and describe different aspects of motion.

Velocity refers to the rate at which an object changes its position in a particular direction over time. It is a vector quantity, meaning it has both magnitude (speed) and direction. Velocity is calculated as the change in displacement divided by the change in time.

Acceleration, on the other hand, refers to the rate at which an object changes its velocity over time. It is also a vector quantity and is calculated as the change in velocity divided by the change in time.

While velocity and acceleration are related, they are not the same concept and are expressed differently. Velocity describes the speed and direction of motion, while acceleration describes how quickly the velocity changes.

They are both important in understanding the motion of objects and are fundamental concepts in physics.

To know more about acceleration, refer here:

https://brainly.com/question/14683118#

#SPJ11

The electric field required to straighten the protons' paths is 3.49 10^{-2} V/m, and it must be in the opposite direction of the protons' motion.

This is due to the magnetic field's force, which always pushes it in a direction that is perpendicular to both its own and the magnetic field's directions. The force pushes the proton in a circular path because the magnetic field is pointing directly out of the screen in this case.

The electric force on a proton moving in an electric field is given by:

F_e = qE

F_e = electric force

q = charge of the proton (+1.602 × 10^{-19} C)

E = electric field

In a magnetic field, the magnetic force on a moving proton is,

F_m = qvB

F_m = magnetic force

v = velocity of the proton

B = magnetic field strength

The electric force must be equal in magnitude and direction to the magnetic force in order to straighten the protons' paths.

F_e = F_m

qE = qvB

E = vB

Substitute the given values,

E = (7.00 × 10^{-2} m) × (0.498 T)

 = 3.49 × 10^{-2} V/m

To know more about the electric field visit:

https://brainly.com/question/19878202

#SPJ1

A section of a sphere is mirrored on both sides. If the magnification of an object is +3.70 the magnification is -4.70.

The magnification of an object at the same distance in front of the convex side of the mirrored section of a sphere can be found using the mirror equation:
1/f = 1/di + 1/do
where f is the focal length of the mirror, di is the distance of the object from the mirror, and do is the distance of the image from the mirror.
Since the section is mirrored on both sides, the focal length of the concave and convex sides will be the same. Therefore, we can use the magnification equation:
m = -di/do

where m is the magnification.
We know that when the section is used as a concave mirror, the magnification is +3.70. Therefore,
+3.70 = -di/do

Solving for do, we get
do = -di/3.70
Now, substituting this value of do into the mirror equation, we get
1/f = 1/di - 3.70/di
Simplifying this equation, we get
f = di/4.70
Therefore, the magnification of an object at the same distance in front of the convex side of the mirrored section will be
m = -di/(di/4.70)
m = -4.70

Learn more about magnification here:

https://brainly.com/question/21370207

#SPJ11

At an altitude of 50km, you would expect the sky color to be a darker shade of blue, almost black.

This is because the atmosphere becomes thinner as you go higher in altitude, leading to less scattering of sunlight.

The lower atmosphere's blue color can be explained by several factors, including Rayleigh scattering and absorption of light. Rayleigh scattering occurs when sunlight interacts with gas molecules and small particles in the atmosphere. This scattering is more effective for shorter wavelengths of light, such as blue and violet.

However, our eyes are more sensitive to blue light, which is why we perceive the sky as blue. Additionally, some of the violet light is absorbed by the ozone layer, further contributing to the sky's blue appearance.

To know more about Rayleigh scattering click on below link :

https://brainly.com/question/30694232#

#SPJ11

For a concave mirror, an object located from infinity to the focal distance F (regions 1 and 2) forms a real inverted image located on the same opposite side of the mirror as the object.

When an object is located from infinity to the focal distance of a concave mirror, the image formed is real and inverted. This is because the light rays converge to a point after reflecting off the mirror, creating an actual intersection of the light rays. The image is located on the same opposite side of the mirror as the object.

Therefore, an object located from infinity to the focal distance F (regions 1 and 2) forms a real inverted image located on the same opposite side of the mirror as the object.

To know more about concave mirror click here:

https://brainly.com/question/16075331

#SPJ11

Objects with charge: Electric and Magnetic fields, Objects with iron or steel: Magnetic field.  and Objects with mass: Gravitational field.

Electric fields are associated with objects that have an electric charge. Any object that has a charge, whether it is positive or negative, will create an electric field around it. This field can interact with other charged objects and cause a force between them.

Magnetic fields are associated with objects that have magnetic properties, such as iron or steel. These materials have tiny magnetic domains that can align in the presence of an external magnetic field, creating a net magnetic field. This magnetic field can interact with other magnetic objects and cause a force between them.

Gravitational fields are associated with objects that have mass. Any object that has mass, whether it is large or small, will create a gravitational field around it. This field can interact with other massive objects and cause a force between them. The strength of the gravitational field is proportional to the mass of the object creating the field.

Therefore, Charged objects exhibit electric and magnetic fields, whereas steel or iron objects exhibit a magnetic field.  and the gravitational field for mass-bearing objects.

To learn more about Gravitational force click:

brainly.com/question/29190673

#SPJ1

The magnitude of the torque applied to the drum by the pull cord is approximately 4.89 Nm.

Torque is a measure of the twisting force that causes rotation. It is a vector quantity that depends on the force applied, the distance between the force and the pivot point, and the angle between the force and the lever arm (the perpendicular distance between the force and the pivot point). To find the magnitude of torque applied to the drum, you can use the formula: torque = force x radius. In this case, the force is 76 N and the radius is 6.43 cm (which needs to be converted to meters).
So first, convert the radius to meters: 6.43 cm = 0.0643 m.
Now, calculate the torque: torque = 76 N x 0.0643 m = 4.8868 Nm.
Therefore, the magnitude of the torque applied to the drum by the pull cord is approximately 4.89 Nm.

Learn more about Torque :

https://brainly.com/question/29024338

#SPJ11

According to Phil, the only way we know how to get accurate stellar masses is when they are in a binary system.

In a binary system, two stars orbit each other, and their gravitational interaction can be observed and measured. This interaction allows astronomers to determine the stars' masses using Kepler's laws and other astrophysical methods. Other methods, such as using iron or hydrogen absorption lines, can provide information about the stars' compositions and temperatures, but not their masses with the same accuracy as binary systems.

To obtain accurate stellar masses, it is essential to observe stars in a binary system, as their gravitational interaction provides the most reliable measurements.

To know more about gravitational interaction visit:

brainly.com/question/11974484

#SPJ11

A falling 1-N apple hits ground with a force of about C) 1 N

The force with which an object falls to the ground is determined by its weight, which is equal to its mass multiplied by the acceleration due to gravity. On Earth, the acceleration due to gravity is approximately 9.8 m/s^2. Since the weight of a 1-N apple is 1 N, the force with which it hits the ground would also be approximately 1 N.

Therefore, the correct answer is C. 1 N. However, it's worth noting that this answer assumes the apple is falling freely under the influence of gravity and there are no other forces acting on it, such as air resistance.

In reality, the force with which the apple hits the ground could vary depending on various factors such as height from which it falls, air resistance, and surface on which it falls.

For more questions like Force click the link below:

https://brainly.com/question/13191643

#SPJ11

The pitcher has done 57.68 Joules of work on the 0.142 kg baseball by throwing it.

To calculate the work done on a 0.142 kg baseball by the pitcher, we need to consider the initial speed of the ball (28.5 m/s) and the terms "speed" and "work."

First, let's calculate the ball's kinetic energy (KE) using the formula: KE = 0.5 * mass * speed^2

KE = 0.5 * 0.142 kg * (28.5 m/s)^2

Now, solve for the kinetic energy:
KE = 0.071 * 812.25
KE = 57.68 J (Joules)

Since air drag is negligible, the work done by the pitcher on the ball is equal to the ball's kinetic energy. So, the pitcher has done 57.68 Joules of work on the 0.142 kg baseball by throwing it at a speed of 28.5 m/s.

To know more about work: https://brainly.com/question/25573309

#SPJ11

The moment of inertia of the machine part about an axis through its center of mass is 50384.37 kg·m².

Given:

T = 265 s (the time period of oscillation)

k = 0.450 N·m/rad (torsion constant)

The torsion pendulum equation relates the moment of inertia (I) of an object to its torsion constant (k) and the time period of oscillation (T):

I = (k × T²) / (4π²)

Substituting the values into the equation:

I = (0.450 N·m/rad × (265 s)²) / (4π²)

Calculating:

I = 0.450 N·m/rad × 70345 s²/ (4π²)

I = 0.450 N·m/rad × 176164225 s² / (4π²)

I = 0.450 N·m/rad × 4437.6 × 10⁶ s² / (4π²)

I = 0.450 N·m/rad × 4437.6 × 10⁶ s² / (39.48)

I = 50384.37 N·m·s²

I = 50384.37 kg·m²

Learn more about inertia, here:

https://brainly.com/question/3268780

#SPJ12

Magnification is the relationship between the size of an image and the size of the item that created it in optics. The ratio of the image length to the object length, as measured in planes perpendicular to the optical axis, is referred to as linear magnification, also known as lateral or transverse magnification.

Since the section of the sphere is mirrored on both sides, the focal length of the concave mirror and the convex mirror will be the same. Therefore, we can use the mirror formula:
1/f = 1/u + 1/v
Where f is the focal length, u is the distance of the object from the mirror, and v is the distance of the image from the mirror.

When the section is used as a concave mirror, the magnification is given by:
m = -v/u = +4.10

Since the magnification is positive, the image is upright.

Now, when the same object is placed in front of the convex side at the same distance u, the image will be virtual and erect. The magnification is given by:
m = v/u

To find v, we need to first find f. We know that:
m = -v/u = +4.10
Therefore, v = -4.10u

Now, using the mirror formula, we can find f:
1/f = 1/u + 1/v
1/f = 1/u - 1/4.10u
1/f = (4.10 - 1)/4.10u
f = 4.10u/3.10
f = 1.32u

Now that we know the focal length, we can find the image distance v:
1/f = 1/u + 1/v
1/1.32u = 1/u + 1/v
v = -0.32u

Therefore, the magnification is: m = v/u = -0.32

So, the at the same distance in front of the convex side is -0.32.

Know more about the magnification of the object:

https://brainly.com/question/20486185

#SPJ11

A torque is a force that a lever arm uses to apply to a body. When used to describe internal combustion engines or electric motors, torque refers to the force acting on the driving shaft.

To determine the torque, abductor muscle force, and net hip joint reaction force in a patient standing on one limb, please follow these steps:

1. Determine the torque that the abductor muscles must provide to maintain the body position:
i. Identify the forces acting on the hip joint: the patient's body weight (W) acting vertically downwards and the abductor muscle force (F) acting perpendicular to the lever arm (L).
ii. Calculate the torque (T) required to maintain body position using the formula: T = F * L

2. Determine the abductor muscle force that was required to produce this torque:
i. Rearrange the formula for torque to find the abductor muscle force: F = T / L
ii. Substitute the calculated torque (T) and the known lever arm (L) into the formula to find the abductor muscle force (F).

3. Determine the magnitude of the net hip joint reaction force:
i. Recognize that the net hip joint reaction force (R) is the vector sum of the abductor muscle force (F) and the patient's body weight (W).
ii. Calculate the magnitude of the net hip joint reaction force (R) using the Pythagorean theorem: R = √(F² + W²)

In summary, to solve this problem, you need to first calculate the torque required to maintain body position, then determine the abductor muscle force needed to produce this torque, and finally find the magnitude of the net hip joint reaction force.

Know more about torque:

https://brainly.com/question/17512177

#SPJ11

These four statements are correctly describe the isotopes.

Therefore, the statements "Isotopes of the same element have the same number of neutrons," "All isotopes are unstable," and "Isotopes are identified by their atomic number" are incorrect.

What are the isotopes?

Isotopes are variants of an element that have the same number of protons in their atomic nucleus but different numbers of neutrons. Isotopes of an element share the same atomic number, which is the number of protons in the nucleus, but have different atomic masses due to the varying number of neutrons. For example, carbon-12, carbon-13, and carbon-14 are three isotopes of the element carbon, with 6, 7, and 8 neutrons, respectively.

Isotopes occur naturally for many elements, and some isotopes can be artificially created through nuclear reactions. Isotopes have a wide range of applications in fields such as radiometric dating, nuclear power, medical diagnosis and treatment, and materials science.

To know more about isotopes, visit:

https://brainly.com/question/11808418

#SPJ9

Answer:1,4,5

Explanation:

The rate of heat connected into the ambient air from the pipe is approximately 8667 watts.

To determine the rate of heat convected into the ambient air from the pipe, we need to use the formula:

Q = h * A * ΔT

Where:
Q = Rate of heat transfer in watts
h = Convective heat transfer coefficient
A = Surface area of the pipe
ΔT = Temperature difference between the surface of the pipe and ambient air

Assuming that the pipe is made of copper (which has a convective heat transfer coefficient of approximately 100 W/m²K), and has a diameter of 0.05 meters and length of 1 meter, the surface area of the pipe can be calculated as:

A = π * d * L
A = π * 0.05 * 1
A = 0.157 m²

Assuming the ambient temperature is 25°C and the temperature of the pipe surface is 150°C (which is a typical temperature for a hot water pipe), the temperature difference (ΔT) can be calculated as:

ΔT = 150 - 25
ΔT = 125°C

Converting the velocity of the air from feet per second to meters per second (since the convective heat transfer coefficient is in units of W/m²K), we get:

V = 7 * 0.3048
V = 2.1336 m/s

Now we can calculate the convective heat transfer coefficient as:

h = 100 * V^(0.8) / d^(0.2)
h = 100 * 2.1336^(0.8) / 0.05^(0.2)
h = 440.46 W/m²K

Finally, substituting all the values into the formula, we get:

Q = 440.46 * 0.157 * 125
Q = 8667.33 watts

Therefore, the rate of heat convected into the ambient air from the pipe is approximately 8667 watts.

Know more about Average Velocity here:

https://brainly.com/question/13372043

#SPJ11

The rms current in the circuit consisting of the capacitor connected to the ac generator is 0.929 A.

To find the rms current in the circuit, we can use the formula:

I_rms = V_rms / X_c

Where:
I_rms is the rms current,
V_rms is the rms voltage (112 V),
X_c is the capacitive reactance.

To find X_c, we use the formula:

X_c = 1 / (2 * π * f * C)

Where:
f is the frequency (60.0 Hz),
C is the capacitance (22.0 μF).

First, let's calculate X_c:

X_c = 1 / (2 * π * 60.0 Hz * 22.0 * 10⁻⁶ F) ≈ 120.57 Ω

Now, we can find the rms current:

I_rms = 112 V / 120.57 Ω ≈ 0.929 A

So the rms current in the circuit is 0.929 A (to three significant figures).

Learn more about rms current here: https://brainly.com/question/31384351

#SPJ11

We cannot provide a numerical answer for the moment at point C.

Explanation:

To determine the normal force, shear force, and moment at a section passing through point C, we can follow these steps:

1. Normal force at point C:
Since normal force is the force acting perpendicular to the surface, and there is no information given about any additional forces in the vertical or horizontal direction, the normal force at point C would be zero. This means there is no force acting perpendicular to the surface at point C.

Normal force at point C = 0

2. Shear force at point C:
Shear force is the force acting parallel to the surface. In this case, the only force acting on the structure is P = 9 kN. Since no other forces or reactions are mentioned, the shear force at point C is equal to the applied force P.

Shear force at point C = 9 kN

3. Moment at point C:
To determine the moment at point C, we need to know the distance from the point where the force is applied to point C. However, this information is not provided in the question. Assuming the distance is 'd', the moment at point C can be calculated using the formula:

Moment at point C = P * d

Without knowing the value of 'd', we cannot provide a numerical answer for the moment at point C.

Learn more about Shear force here: brainly.com/question/30763282

#SPJ11

At the equator, Philadelphia, and the North Pole, a point's linear velocity and acceleration are determined as described above.

(a) At the equator:

The Earth's equator has a radius of 3960 miles. Therefore, the linear velocity of a point on the surface of the Earth at the equator is:

v = ωr = (2π / 23.9333 hours) * 3960 miles = 1037.564 mph

The acceleration of a point on the surface of the Earth at the equator can be calculated using the formula:

[tex]a = v^2 / ra = (1037.564 mph)^2 / 3960 miles = 0.273 g[/tex]

(b) At Philadelphia, latitude 40° north:

r = 3960 miles * cos(40°) = 3004.05 miles

The linear velocity of a point on the surface of the Earth at Philadelphia is:

v = ωr = (2π / 23.9333 hours) * 3004.05 miles = 784.166 mph

[tex]a = v^2 / r = (784.166 mph)^2 / 3004.05 miles = 0.154 g[/tex]

(c) At the North Pole:

r = 3960 miles * cos(90°) = 3960 miles

The linear velocity of a point on the surface of the Earth at the North Pole is:

v = ωr = (2π / 23.9333 hours) * 3960 miles = 1038.993 mph

The acceleration of a point on the surface of the Earth at the North Pole is:

[tex]a = v^2 / r = (1038.993 mph)^2 / 3960 miles[/tex] = 0.034 g

A key idea in physics is acceleration, which defines how rapidly an object's velocity alters over time. In other words, it is the rate at which the velocity of an object changes in relation to time. An item is considered to be accelerating when its speed changes, whether it is increasing or decreasing.

Depending on how the velocity changes, acceleration can be either positive or negative. For instance, an object's acceleration is positive while it is speeding up, whereas it is negative when it is going down. According to Newton's second equation of motion, acceleration is directly linked to the force pulling on an object.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

At the equator, Philadelphia, and the North Pole, a point's linear velocity and acceleration are determined as described above.

(a) At the equator:

The Earth's equator has a radius of 3960 miles. Therefore, the linear velocity of a point on the surface of the Earth at the equator is:

v = ωr = (2π / 23.9333 hours) * 3960 miles = 1037.564 mph

The acceleration of a point on the surface of the Earth at the equator can be calculated using the formula:

[tex]a = v^2 / ra = (1037.564 mph)^2 / 3960 miles = 0.273 g[/tex]

(b) At Philadelphia, latitude 40° north:

r = 3960 miles * cos(40°) = 3004.05 miles

The linear velocity of a point on the surface of the Earth at Philadelphia is:

v = ωr = (2π / 23.9333 hours) * 3004.05 miles = 784.166 mph

[tex]a = v^2 / r = (784.166 mph)^2 / 3004.05 miles = 0.154 g[/tex]

(c) At the North Pole:

r = 3960 miles * cos(90°) = 3960 miles

The linear velocity of a point on the surface of the Earth at the North Pole is:

v = ωr = (2π / 23.9333 hours) * 3960 miles = 1038.993 mph

The acceleration of a point on the surface of the Earth at the North Pole is:

[tex]a = v^2 / r = (1038.993 mph)^2 / 3960 miles[/tex] = 0.034 g

A key idea in physics is acceleration, which defines how rapidly an object's velocity alters over time. In other words, it is the rate at which the velocity of an object changes in relation to time. An item is considered to be accelerating when its speed changes, whether it is increasing or decreasing.

Depending on how the velocity changes, acceleration can be either positive or negative. For instance, an object's acceleration is positive while it is speeding up, whereas it is negative when it is going down. According to Newton's second equation of motion, acceleration is directly linked to the force pulling on an object.

To learn more about Acceleration visit here:

brainly.com/question/30660316

#SPJ4

The given expression is not a valid velocity potential for a uniform flow at an angle of attack α. The correct expression for the velocity potential of a uniform flow at an angle of attack α is φ(r, θ) = U(r cos θ + sin θ), where U is the velocity magnitude.

The velocity potential for a uniform flow at an angle of attack would not be the same as the one given in class for an incompressible uniform flow parallel to the x-axis. The formula given in the question, φ(r,y)=Lycosa-rsina) cos α cos appears to be a formula for a different scenario.

However, to answer the question directly, the terms "velocity", "parallel", and "potential" are all related to the concept of potential flow theory in fluid mechanics. Velocity potential refers to the scalar potential function that can be used to describe the velocity field in a possible flow, where the flow is irrotational and the pressure varies only with the position. Parallel refers to the direction of the flow, where in this case the flow is parallel to the x-axis. Potential refers to the energy per unit mass of the fluid, which is conserved in a potential flow.

In summary, the formula given in the question does not correspond to the velocity potential for a uniform flow at an angle of attack a. However, the terms "velocity", "parallel", and "potential" are all relevant to the concept of potential flow theory.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ11

The frequency of the most intense radiation from an object with temperature 100°C is approximately 3.9 × 10^13 Hz, which is option B.

Planck's constant, also known as h, is a fundamental universal constant that defines the quantum nature of energy and connects the energy of a photon to its frequency. The constant value in the International System of Units (SI) is 6.626070151034 joule-hertz1 (or joule-seconds).

We can use Wien's displacement law to determine the wavelength of the most intense radiation from an object with temperature T. Wien's law is given by:

λ_max = b/T

where λ_max is the wavelength of the most intense radiation, T is the temperature in Kelvin, and b is Wien's displacement constant, which is given as 2.898 × 10⁻³m.K.

When we convert the 100°C temperature to Kelvin, we obtain:

[tex]T = (100 + 273) K = 373 K[/tex]

When we change the values in the above equation, we obtain:

λ_max = (2.898 × 10⁻³m.K) / 373 K = 7.77 × 10⁻⁶ m

The frequency of radiation can be determined using the formula:

c = f λ

where c is the speed of light in a vacuum, λ is the wavelength, and f is the frequency.

Substituting the values, we get:

f= c / λ_max = (3.0 × 10⁸ m/s) / (7.77 × 10⁻⁶m) = 3.86 × 10¹³ Hz

To know more about radiation visit:-

https://brainly.com/question/4072364

#SPJ1

After two seconds, the block has walked 257.6 feet. After 5 seconds, the block's velocity is 161 feet per second.

V is the velocity, d is the distance, and t is the time in the equation V = d/t. Calculate the object's acceleration by dividing its mass by its force, then multiplying the result by the acceleration's duration.

s = ut + (1/2)at²

where s is the distance traveled, u is the initial velocity, a is the acceleration, and t is the time taken.

After 2 seconds:

s = 450 ft (height of the platform)

t = 2 s

a = g = 32.2 ft/s²

Using the equation, we get:

s = ut + (1/2)at²

450 ft = 0 + (1/2) * 32.2 ft/s² * (2 s)²

450 ft = 0 + 64.4 ft/s² * 4 s²

450 ft = 257.6 ft

s = 257.6 ft

v = u + at

v = 0 + 32.2 ft/s² * 2 s = 64.4 ft/s

s = 450 ft (height of the platform)

t = 5 s

a = g = 32.2 ft/s²

s = ut + (1/2)at²

450 ft = 0 + (1/2) * 32.2 ft/s² * (5 s)²

450 ft = 403 ft

s = 403 ft

v = u + at

v = 0 + 32.2 ft/s² * 5 s = 161 ft/s

To know more about velocity visit:-

https://brainly.com/question/17127206

#SPJ1

The resolved shear stress on the (111)[101] slip system is 43.3 MPa, and on the (111)[110] slip system, it is 25.98 MPa.

To calculate the resolved shear stress (τ) on the given slip systems, we can use the equation: τ = σ * cos(φ) * cos(λ), where σ is the applied stress, φ is the angle between the stress direction and the slip plane normal, and λ is the angle between the stress direction and the slip direction.

(a) For the (111)[101] slip system, first calculate the angle φ between [001] and (111). Use the dot product formula: cos(φ) = ([001] • (111))/(|[001]|*|(111)|).

Next, calculate the angle λ between [001] and [101] using the same formula. Then, substitute the calculated cos(φ) and cos(λ) values and the given stress of 75 MPa into the equation to find the resolved shear stress.

(b) For the (111)[110] slip system, follow the same process, but now calculate the angle φ between [001] and (111), and λ between [001] and [110]. Substitute the calculated cos(φ) and cos(λ) values and the given stress of 75 MPa into the equation to find the resolved shear stress.

To know more about shear stress click on below link:

https://brainly.com/question/13385447#

#SPJ11

The rotational kinetic energy of the object is 83,200 Joules.

The rotational kinetic energy of an object is the energy it possesses due to its rotation. It can be calculated using the formula:

[tex]K_rot = (1/2) * I * ω^2[/tex]

where K_rot is the rotational kinetic energy, I is the moment of inertia of the object, and ω is its angular velocity.

In this case, the object has a moment of inertia of [tex]26 kg·m^2[/tex]and is rotating with an angular speed of 80 radians/s. Substituting these values into the formula gives:

[tex]K_rot = (1/2) * 26 kg·m^2 * (80 radians/s)^2[/tex]

= 83,200 J

Therefore, the rotational kinetic energy of the object is 83,200 Joules.

learn more about kinetic energy

https://brainly.com/question/26472013

#SPJ4

The energy required to accelerate a 1765 kg car from rest to 29 m/s is approximately 373,128,250 Joules.

To calculate the energy required to accelerate a car from rest to 29 m/s, we can use the formula:

E = (1/2)mv^2

where E is the energy, m is the mass of the car, and v is the final velocity.

First, we need to convert the mass of the car from kilograms to grams:

m = 1765 kg = 1,765,000 g

Next, we can substitute the values into the formula:

E = (1/2)(1,765,000 g)(29 m/s)^2

Simplifying the equation:

E = (1/2)(1,765,000)(841) JE = 373,128,250 J

To know more about accelerate, click here.

https://brainly.com/question/30660316

#SPJ4

The wavelength of the ultrasonic wave emitted by bats is B) 3.4×10−3 m.

To calculate the wavelength of the ultrasonic wave emitted by bats, we can use the formula:

Wavelength (λ) = Speed of sound (v) / Frequency (f)

Given that the frequency (f) is 1.0×10^5 Hz and the speed of sound (v) is 340 m/s, we can plug in the values:

λ = 340 m/s / 1.0×10^5 Hz

λ = 3.4×10^−3 m

So the correct answer is: B) 3.4×10^−3 m

Learn more about ultrasonic wave at

https://brainly.com/question/3359719

#SPJ11

The speed of a 220 g block hanging from a 58.0 cm long string is 3.94 m/s.

The question is "A 220 g block on a 58.0 cm -long string swings in a circle on a horizontal, frictionless table at 65.0 rpm. What is the speed of the block?"

Based on the information given, we know that there is a 220 g block hanging from a 58.0 cm long string.

The block is swinging in a circle on a horizontal, frictionless table at a rate of 65.0 revolutions per minute (rpm).

To find the speed of the block, we can use the formula:
v = 2πr/T
where v is the speed, r is the radius of the circle (which is the length of the string), and T is the period (the time it takes for the block to complete one revolution).

We can convert the rpm to revolutions per second (rps) by dividing by 60:
65.0 rpm / 60 s = 1.083 rps

The period is then:
T = 1 / 1.083 rps = 0.923 s

Using the length of the string as the radius, we have:
r = 58.0 cm = 0.58 m

Plugging these values into the formula, we get:
v = 2π(0.58 m) / 0.923 s = 3.95 m/s

Therefore, if a 220 g block on a 58.0 cm-long string swings in a circle on a horizontal, frictionless table at 65.0 rpm, then the speed of the block is 3.94 m/s.

Learn more about speed:

https://brainly.com/question/13943409

#SPJ11

The first-order decomposition of phosphine is a chemical reaction in which phosphine decomposes into its constituent elements over time. The rate of this reaction is proportional to the concentration of phosphine. In this problem, we are given that the time required to go from 1.00 m to 0.250 m is 120 seconds.

To determine the time it will take for the concentration to go from 0.400 m to 0.100 m, we can use the following formula:

ln([A]t/[A]0) = -kt

where [A]t is the concentration of phosphine at time t, [A]0 is the initial concentration of phosphine, k is the rate constant of the reaction, and t is the time.

We can rearrange this formula to solve for t:

t = ln([A]t/[A]0) / -k

We know that the initial concentration is [A]0 = 0.400 m and the final concentration is [A]t = 0.100 m. We can also use the rate constant k, which can be determined from the half-life of the reaction:

t1/2 = ln(2) / k

We are given that the time required to go from 1.00 m to 0.250 m is 120 seconds, so we can use this information to find the half-life:

t1/2 = ln(2) / k = ln(2) / (120 seconds) = 0.0058 seconds^-1

Now we can use this value of k and the concentrations to find the time required to go from 0.400 m to 0.100 m:

t = ln([A]t/[A]0) / -k = ln(0.100/0.400) / (-0.0058 seconds^-1) = 358 seconds

Therefore, it will take approximately 358 seconds for the concentration of phosphine to go from 0.400 m to 0.100 m.

learn more about decomposition here: brainly.com/question/28383069

#SPJ11

(b) 50%.  In a polarization of light experiment an incandescent light source is used. The ratio polarized to unpolarized light intensity is  50%.

In an experiment to measure the polarization of light, an incandescent light source is used to emit light in all directions. However, the emitted light is unpolarized, meaning that the light waves vibrate in all possible planes perpendicular to the direction of propagation. To obtain polarized light, a polarizer is used to pass only the light waves that vibrate in a single plane. As a result, only half of the original light intensity can pass through the polarizer, and the other half is absorbed or blocked. Thus, the ratio of polarized to unpolarized light intensity is 1:1 or 50%. This result holds true for any polarizer that only allows light waves vibrating in a single plane to pass through.

learn more about light intensity here:

https://brainly.com/question/30499504

#SPJ11

The average magnitude of the induced emf can be calculated using the formula. The magnitude of the induced emf is therefore 0.424 volts.

emf = -NΔΦ/Δt
where N is the number of turns in the loop, ΔΦ is the change in magnetic flux, and Δt is the time interval over which the change occurs. Since the magnetic field is perpendicular to the plane of the loop, the change in magnetic flux can be expressed as:
ΔΦ = B*A*cos(θ)*Δt
where B is the magnetic field strength, A is the area of the loop, θ is the angle between the magnetic field and the normal to the plane of the loop, and Δt is the time interval. In this case, θ = 90 degrees, so cos(θ) = 0. Therefore, the formula simplifies to:
ΔΦ = B*A*Δt
Substituting the given values, we get:
ΔΦ = (0.422 T)*(1 m^2)*(0.165 s) = 0.070 m^2·T·s
Since the loop has only one turn, N = 1. Therefore, the emf can be calculated as:
emf = -(ΔΦ/Δt) = -(0.070 m^2·T·s/0.165 s) = -0.424 V
The magnitude of the induced emf is therefore 0.424 volts.

To find the average magnitude of the induced emf in a situation where the change in shape occurs in 0.165 s and the local 0.422-T magnetic field is perpendicular to the plane of the loop, we can follow these steps:
1. Determine the initial magnetic flux (Φ₁) through the loop before the change in shape.
2. Determine the final magnetic flux (Φ₂) through the loop after the change in shape.
3. Calculate the change in magnetic flux (ΔΦ) by subtracting Φ₁ from Φ₂.
4. Calculate the average magnitude of the induced emf (ε) using Faraday's law: ε = |ΔΦ| / Δt, where Δt is the time taken for the change in shape (0.165 s).

Visit here to learn more about magnetic flux:

brainly.com/question/30858765

#SPJ11