Let N be a normal subgroup of a finite group G. Prove that the order of the group element gN in G/N divides the order of g.

The limit of the sequence is 0.

To determine the limit of the sequence, we can use the Limit Laws and theorems. We will start by simplifying the expression:

cn=ln((5n-7)/(12n+4))

cn=ln(5n-7)-ln(12n+4)

Now we can use the Limit Laws:

lim n→∞ ln(5n-7) = ∞ (since ln(x) → ∞ as x → ∞)

lim n→∞ ln(12n+4) = ∞ (since ln(x) → ∞ as x → ∞)

Therefore, we have:

lim n→∞ cn = lim n→∞ (ln(5n-7)-ln(12n+4))

= lim n→∞ ln(5n-7) - lim n→∞ ln(12n+4)

= ∞ - ∞ (which is an indeterminate form)

To evaluate this limit, we can use L'Hopital's Rule:

lim n→∞ ln(5n-7) - ln(12n+4) = lim n→∞ [ln((5n-7)/(12n+4))]

= lim n→∞ [(5/12)/(5/n - 3/4n²)]

Since the denominator goes to ∞ and the numerator is constant, we have:

lim n→∞ [(5/12)/(5/n - 3/4n²)] = 0

Therefore, we have:

lim n→∞ cn = 0

So the limit of the sequence is 0.

To learn more about limit here:

brainly.com/question/12207558#

#SPJ11

To make a table of values using multiples of π/4 for x with the function y = cos x, we will calculate the cosine values for the given x values. Here's the table:

x | y
-------
0 | cos(0) = 1
π/4 | cos(π/4) = √2/2 ≈ 0.71
π/2 | cos(π/2) = 0
3π/4 | cos(3π/4) = -√2/2 ≈ -0.71
π | cos(π) = -1
5π/4 | cos(5π/4) = -√2/2 ≈ -0.71
3π/2 | cos(3π/2) = 0
7π/4 | cos(7π/4) = √2/2 ≈ 0.71
2 | cos(2) ≈ -0.42

Your answer:
x | y
-------
0 | 1
π/4 | 0.71
π/2 | 0
3π/4 | -0.71
π | -1
5π/4 | -0.71
3π/2 | 0
7π/4 | 0.71
2 | -0.42

Learn more about : Cosine Values - https://brainly.com/question/31497709

#SPJ11

The outcomes with at least two tails are (T, T, H), (T, H, T), (H, T, T), and (T, T, T), which have a total of 4 outcomes.

The probability of getting at least two tails is 4/8 = 1/2. Therefore, the answer is (c) 1/2.

To estimate the displacement of a moving object when given its velocity function, you can use the Definite Integral and Riemann Sum approaches.

Steps:

1. You're given the object's velocity function, which represents the rate of change of its position with respect to time.
2. To find the displacement, you need to calculate the total change in position over a given time interval. This can be done by finding the area under the velocity function curve within that time interval.
3. The Definite Integral approach allows you to find the exact area under the curve by integrating the velocity function over the specified time interval.
4. The Riemann Sum approach provides an approximation of the area under the curve by dividing the interval into smaller subintervals and summing up the areas of rectangles formed using the velocity function values at certain points within these subintervals.

Both of these approaches can help estimate the object's displacement, but the Definite Integral will give you a more accurate result, while the Riemann Sum provides an approximation that gets better as the number of subintervals increases. U-substitution is a method used for finding integrals, but it's not a direct approach to estimate displacement; it could be a part of the process if the velocity function requires it for integration.

Learn more about function here:

https://brainly.com/question/30093857

#SPJ11

Answer: C) [tex]3x^3+ 6x^2 + 5x +10[/tex]

Step-by-step explanation:

Using the FOIL method since we're multiplying two binomials. We get...

F: Firsts

[tex]3x^2(x)[/tex]=[tex]3x^3[/tex]

O: Outside

[tex]3x^2(2) = 6x^2[/tex]

I: Insides

[tex]5(x) = 5x[/tex]

L: Lasts

[tex]5(2) = 10[/tex]

Put them together and we have [tex]3x^3+ 6x^2 + 5x +10[/tex]! These two are both equivalent since the form given in the question was factored form and this form is just the same thing expanded!

Answer:

C

Step-by-step explanation:

solve f ( x ) = g ( x ) for x is 3.093

To solve f(x) = g(x) for x, we simply set the two equations equal to each other:
6(2.9)x = 52(1.4)x
Next, we can simplify by dividing both sides by (1.4)x:
6(2.9) / 52 = 1.4x / 1.4x
Simplifying further, we get:
0.3228 = 1
This is not a true statement, so there is no value of x that would make f(x) equal to g(x). Therefore, f(x) and g(x) do not intersect and there is no solution for x.

To solve f(x) = g(x) for x, we need to set the two functions equal to each other:

6(2.9)x = 52(1.4)x

Now, we want to isolate x. To do that, we can first divide both sides by 6:

(2.9)x = (52/6)(1.4)x

Simplify the right side:

(2.9)x = (8.67)(1.4)x

Now, we can use logarithms to solve for x. Take the natural logarithm (ln) of both sides:

ln((2.9)x) = ln((8.67)(1.4)x)

Use the logarithm property to bring down the exponent:

x*ln(2.9) = ln(8.67) + x*ln(1.4)

Isolate x by moving the x terms to one side:

x*ln(2.9) - x*ln(1.4) = ln(8.67)

Factor out x:

x(ln(2.9) - ln(1.4)) = ln(8.67)

Finally, divide by (ln(2.9) - ln(1.4)) to find x:

x = ln(8.67) / (ln(2.9) - ln(1.4))

Use a calculator to find the numerical value of x:
x ≈ 3.093

Know more about logarithm here:

https://brainly.com/question/30085872

#SPJ11

The sum of the tuple (1, 2, -2) and twice the tuple (-2, 3, 5) is (-3, 8, 8).

To calculate the sum of two tuples, we need to add the corresponding elements of the tuples. In this case, the tuples are (1, 2, -2) and twice (-2, 3, 5), which gives us (-4, 6, 10) when multiplied by 2. Then, we add the corresponding elements of both tuples: 1 + (-4) = -3 for the first element, 2 + 6 = 8 for the second element, and -2 + 10 = 8 for the third element.

Therefore, the sum of the two tuples is (-3, 8, 8).

To learn more about sum of the tuple here:

brainly.com/question/14239610#

#SPJ11

The given statement "When an additional explanatory or independent variable is introduced into a multiple regression model, the coefficient of multiple determination or R-square will never decrease."

The statement is FALSE.

Because when an additional explanatory or independent variable is introduced into a multiple regression model, the coefficient of multiple determination or R-Squared will never decrease.

A multiple regression model differs from a single variable linear regression model in a way that it uses more than one variable as independent variable. The R-Squared measures the percentage change in the dependent variable that can be explained by the change in independent variable.

It is false because as we know that, R-Squared measures the percentage change in the dependent variable that can be explained by the change in independent variable , any variable introduced which is not related with the dependent variable may easily reduce the R - squared. R-Squared is the square of correlation and if a negatively correlated variable is introduced, R-Squared can very well decreases.

Learn more about Multiple Regression Model at:

https://brainly.com/question/25814703

#SPJ4

The given question is incomplete, complete question is:

True or False: When an additional explanatory or independent variable is introduced into a multiple regression model, the coefficient of multiple determination or R-square will never decrease.

Joan should invest  $4720 annually in her sinking fund to have $250,000 when she retires

We can use the future value formula for an annuity to solve this problem:

FV = PMT * [(1 + r)^n - 1] / r

Where:

We want to find PMT, so we can rearrange the formula:

PMT = FV * r / [(1 + r)^n - 1]

Plugging in the values we know:

FV = $250,000

r = 0.04

n = 29

PMT = $250,000 * 0.04 / [(1 + 0.04)^29 - 1]

PMT = $250,000 * 0.04 / 22.718

PMT = $4720

So Joan should invest approximately $4720 annually in her sinking fund to have $250,000 when she retires in 29 years, assuming an interest rate of 4% compounded annually.

Read more about compound interest at

https://brainly.com/question/24924853

#SPJ1

The total number of arrangements of the letters in the word "REPETITION" where the first occurrence of the letter E is before the first occurrence of the letter T is 120,960.. This can be answered by the concept of Combination.

To solve this problem, we can use the concept of permutations. The word "REPETITION" has a total of 10 letters.

Step 1: Calculate the total number of arrangements of all the letters without any restrictions.

The total number of arrangements of 10 letters without any restrictions can be calculated using the formula for permutations, which is n! (n factorial), where n is the number of items to be arranged. In this case, the total number of arrangements without any restrictions is 10! (10 factorial), which is equal to 3,628,800.

Step 2: Consider the restriction where the first occurrence of the letter E is before the first occurrence of the letter T.

In order to satisfy this restriction, we need to consider the positions of E and T in the arrangements. There are three possible cases:

Case 1: E is in the first position and T is in the second position.

In this case, we have fixed the positions of E and T, and the remaining 8 letters can be arranged in 8! (8 factorial) ways.

Case 2: E is in the first position and T is in a position other than the second.

In this case, we have fixed the position of E, and the position of T can be any of the remaining 8 positions. The remaining 8 letters can be arranged in 8! ways.

Case 3: E is not in the first position and T is in a position after E.

In this case, the position of T is fixed, and the position of E can be any of the positions before T. The remaining 8 letters can be arranged in 8! ways.

Step 3: Calculate the total number of arrangements that satisfy the restriction.

We add the total number of arrangements from each case calculated in Step 2:

8! + 8! + 8!

Step 4: Simplify the expression.

We can factor out 8! from the sum:

8! + 8! + 8! = 3 x 8!

Step 5: Calculate the final answer.

Substitute the value of 8! (8 factorial) into the expression:

3 x (8 x 7 x 6 x 5 x 4 x 3 x 2 x 1) = 3 x 40,320 = 120,960

Therefore, the total number of arrangements of the letters in the word "REPETITION" where the first occurrence of the letter E is before the first occurrence of the letter T is 120,960.

To learn more about Combination here:

brainly.com/question/13387529#

#SPJ

The first statement, "lim f(x) = infinity as x approaches 2," means that as x gets closer and closer to 2, the function f(x) gets larger and larger without bound. Essentially, there is no finite limit to how big f(x) can get as x approaches 2.

The second statement, "f(x) = [infinity]," means that f(x) approaches infinity as x approaches some point (the statement doesn't specify which point). This means that there is no upper bound on how large f(x) can get.

Finally, the third statement says that the values of f(x) can be made arbitrarily close to 0 by taking x sufficiently close to (but not equal to) -2. In other words, if you pick a really small number (like 0.0001), you can find an x value that is very close to -2 that will make f(x) smaller than that number. However, the statement also says that f(x) can get arbitrarily large by taking x sufficiently close to -2 (but not equal to it), so f(x) is not necessarily bounded.

Here are the meanings of each term:

1. lim f(x) = infinity as x -> 2: This means that as the value of x approaches 2 (but does not equal 2), the function f(x) approaches infinity. In other words, the function grows without bound when x is very close to 2.

2. f(x) = [infinity]: This notation is used to emphasize that the function f(x) is taking on very large values or growing without bound, similar to the concept of infinity.

3. Values of f(x) can be made arbitrarily close to 0 by taking x sufficiently close to (but not equal to) -2: This means that as the value of x approaches -2 (but does not equal -2), the function f(x) approaches 0. In other words, the function gets closer and closer to 0 as x gets closer to -2.

4. Values of f(x) can be made arbitrarily large by taking x sufficiently close to (but not equal to) -2: This means that as the value of x approaches -2 (but does not equal -2), the function f(x) approaches infinity. In other words, the function grows without bound when x is very close to -2.

Learn more about calculus here: brainly.com/question/6581270

#SPJ11

There is a single natural cubic spline are there for the given data (0,0), (1,1), (2,2).

Explanation: -

A natural cubic spline is a piecewise cubic function with continuous first and second derivatives that interpolates a set of data points. In this case, the given data points are (0,0), (1,1), and (2,2).

Since there are three data points, we will have two cubic polynomials between the intervals [0,1] and [1,2]. The natural cubic spline condition requires that the second derivative of the spline at the endpoints (0 and 2) is zero.

Let S1(x) and S2(x) be the cubic splines on the intervals [0,1] and [1,2], respectively. Then,

S(x) = ax^3 + bx^2 + cx + dfor (0 [tex]\leq[/tex] x [tex]\leq[/tex]1),
T(x) = Ax^3 + Bx^2 + Cx + D for (1[tex]\leq[/tex] x [tex]\leq[/tex]2).

We need to find the coefficients (a, b, c, d, A, B, C, D) that satisfy the following conditions:

1. S(0) = 0, S(1) = 1
2. T(1) = 1, T(2) = 2
3. S'(1) = T'(1), S''(1) = T''(1) (continuity of the first and second derivatives)
4. S''(0) = S''(2) = 0 (natural spline condition)

Solving these equations will give a unique set of coefficients, which will result in a single natural cubic spline that satisfies the given conditions.

Know more about the "cubic spline" click here:

https://brainly.com/question/31418727

#SPJ11

The given series is a geometric series with the formula: ∑ (1 + 6)^n / 7^n (from n=1 to infinity) In a geometric series,

The convergence or divergence is determined by the common ratio (r). In this case, the common ratio r is (1 + 6) / 7, which simplifies to 1.

Since the absolute value of the common ratio |r| is equal to 1, the series is inconclusive regarding convergence or divergence. Therefore, we need to use another test.

Notice that (1+6)/7 = 7/6 > 1. This means that the terms of the series do not approach zero as n approaches infinity. Therefore, the series sigma^[infinity]_n=1 (1+6)^n/7^n diverges by the divergence test. Therefore, the series does not have a sum.

To know more about term click here

brainly.com/question/19774850

#SPJ11

Step-by-step explanation:

See image

Step-by-step explanation:

Could you give a little more clearer explanation? I would be glad to help!

The given statement "The complement of the false positive rate is the sensitivity of a test" is true because the false positive rate is the proportion of negative instances incorrectly classified as positive, while sensitivity is the proportion of positive instances correctly identified.

False positive rate (FPR) is the proportion of negative instances incorrectly classified as positive, while sensitivity (also known as true positive rate or recall) is the proportion of positive instances correctly identified.

The complement of FPR is 1 - FPR, which is also known as specificity.

Specificity measures the proportion of negative instances correctly identified.

However, the statement would be false if it claimed that the complement of FPR is specificity.

The correct statement would be: the complement of the false positive rate is the specificity of a test.

Learn more about complement:

https://brainly.com/question/98924

#SPJ11

The given statement "The complement of the false positive rate is the sensitivity of a test" is true because the false positive rate is the proportion of negative instances incorrectly classified as positive, while sensitivity is the proportion of positive instances correctly identified.

False positive rate (FPR) is the proportion of negative instances incorrectly classified as positive, while sensitivity (also known as true positive rate or recall) is the proportion of positive instances correctly identified.

The complement of FPR is 1 - FPR, which is also known as specificity.

Specificity measures the proportion of negative instances correctly identified.

However, the statement would be false if it claimed that the complement of FPR is specificity.

The correct statement would be: the complement of the false positive rate is the specificity of a test.

Learn more about complement:

https://brainly.com/question/98924

#SPJ11

The quadratic polynomial is x² - 6x + 31/4

A quadratic polynomial is a polynomial in which the highest power of the unknown is 2.

To form a quadratic polynomial whose zeroes are 3 + √5/2 and 3 - √5/2, we proceed as follows.

Since the zeroes are

Then its factors are

So, to get the quadratic polynomial p(x), we multiply the factors together.

So, we have that

p(x) =  [(x - 3) - √5/2][(x - 3) + √5/2]

= (x - 3)² - (√5/2)²

= x² - 6x + 9 - 5/4

= x² - 6x + (36 - 5)/4

= x² - 6x + 31/4

So, the polynomial is x² - 6x + 31/4

Learn more about quadratic polynomial here:

https://brainly.com/question/30957423

#SPJ1

Answer:

Step-by-step explanation:

[tex]\frac{2^{-3}}{3^{-3} }[/tex]

=(-8)/(-27)

= 8/27

The reported value of [tex]nd 2 0 = 1.4110[/tex] for decane was obtained using light with a wavelength of [tex]589.3 nm[/tex].

The subscript "d" in the relative refractive index notation (nd) refers to the wavelength of light used to measure the refractive index. This notation is used to specify the particular wavelength of light used in a refractive index measurement.

When light passes through a medium, it is refracted or bent due to the change in speed of light as it passes from one medium to another. The amount of bending depends on the refractive index of the medium. The refractive index is a dimensionless quantity that describes how much the speed of light is reduced when it passes through a particular material. The refractive index of a material depends on the wavelength of light that is used to measure it.

Different wavelengths of light have different refractive indices when they pass through the same material. The refractive index of a material can be measured using different wavelengths of light, and the value obtained depends on the wavelength of light used. Therefore, it is essential to specify the wavelength of light used to measure the refractive index of a material.

In the case of decane, the subscript "d" in the relative refractive index notation (nd) stands for the "yellow doublet" line of sodium, which has a wavelength of 589.3 nanometers. Therefore, the reported value of [tex]nd 2 0 = 1.4110[/tex] for decane was obtained using light with a wavelength of [tex]589.3 nm[/tex].

To learn more about material visit:

https://brainly.com/question/14749992

#SPJ11

Let h(x) = x² - x. Then, for any f(x) = ax² + bx + c ∈ p2(r), we have h(0) = 0 and h′(1) = 1 - 1 = 0. Thus, g(h) = h(0)h′(1) = 0. This means that g is the zero functional on the subspace spanned by h.



In this question, we are given a linear functional g : p2(r) → r that is defined by g(f) = f(0)f′(1), where p2(r) is the space of polynomials of degree at most 2 with real coefficients. We need to find a polynomial h(x) ∈ p2(r) such that g(h) = 0 for any f(x) ∈ p2(r).

To find such an h(x), we can first consider the product f(0)f′(1) that appears in the definition of g. Since f(0) is the constant term of f(x) and f′(1) is the slope of the tangent to f(x) at x = 1, the product f(0)f′(1) measures the behavior of f(x) near x = 1.

Based on this observation, we can choose a polynomial h(x) that has a zero at x = 0 and a critical point at x = 1. One such polynomial is h(x) = x² - x, which has h(0) = 0 and h′(x) = 2x - 1, so h′(1) = 1.

Now, we can verify that g(h) = h(0)h′(1) = 0 for any f(x) ∈ p2(r). This is because, for any such f(x), we have f(0) = c and f′(1) = 2a + b, where f(x) = ax² + bx + c. Thus, g(f) = c(2a + b) = 2ac + bc, which is a linear function of a, b, and c.

Since g(h) = 0, we conclude that g is the zero functional on the subspace spanned by h(x). In other words, any polynomial that is a multiple of h(x) will be mapped to zero by g.

To know more about critical point click on below link:

https://brainly.com/question/31017064#

#SPJ11

Let h(x) = x² - x. Then, for any f(x) = ax² + bx + c ∈ p2(r), we have h(0) = 0 and h′(1) = 1 - 1 = 0. Thus, g(h) = h(0)h′(1) = 0. This means that g is the zero functional on the subspace spanned by h.



In this question, we are given a linear functional g : p2(r) → r that is defined by g(f) = f(0)f′(1), where p2(r) is the space of polynomials of degree at most 2 with real coefficients. We need to find a polynomial h(x) ∈ p2(r) such that g(h) = 0 for any f(x) ∈ p2(r).

To find such an h(x), we can first consider the product f(0)f′(1) that appears in the definition of g. Since f(0) is the constant term of f(x) and f′(1) is the slope of the tangent to f(x) at x = 1, the product f(0)f′(1) measures the behavior of f(x) near x = 1.

Based on this observation, we can choose a polynomial h(x) that has a zero at x = 0 and a critical point at x = 1. One such polynomial is h(x) = x² - x, which has h(0) = 0 and h′(x) = 2x - 1, so h′(1) = 1.

Now, we can verify that g(h) = h(0)h′(1) = 0 for any f(x) ∈ p2(r). This is because, for any such f(x), we have f(0) = c and f′(1) = 2a + b, where f(x) = ax² + bx + c. Thus, g(f) = c(2a + b) = 2ac + bc, which is a linear function of a, b, and c.

Since g(h) = 0, we conclude that g is the zero functional on the subspace spanned by h(x). In other words, any polynomial that is a multiple of h(x) will be mapped to zero by g.

To know more about critical point click on below link:

https://brainly.com/question/31017064#

#SPJ11

Probability of getting a 7 when a card is picked randomly is 1/3.

Here, given that

A card is picked at random.

Possible outcomes = {5, 6, 7}

Number of possible outcomes = 3

Favorable outcomes = {7}

Number of favorable outcomes = 1

Probability = Number of favorable outcomes / Total outcomes

                  = 1/3

Hence the required probability is 1/3.

Learn more about Probability here :

https://brainly.com/question/30425801

#SPJ1

Together, mutual exclusivity and exhaustiveness ensure that the hypothesis test is well-defined and produces unambiguous results. This is crucial in scientific research and statistical analysis, where the results of hypothesis testing can have significant implications for further investigation or decision-making.

In hypothesis testing, the null hypothesis (H0) and alternative hypothesis (H1) are two opposing statements about a population parameter. The null hypothesis states that there is no significant difference between the sample data and the population parameter, while the alternative hypothesis states that there is a significant difference.

Mutually exclusive means that the null hypothesis and alternative hypothesis cannot both be true at the same time. If the null hypothesis is true, then the alternative hypothesis must be false, and vice versa. This is important because it helps to avoid ambiguity in the results of the hypothesis test. If the two hypotheses were not mutually exclusive, it would be difficult to determine which hypothesis was supported by the data.

Exhaustive means that one of the two hypotheses must be true. There is no third possibility. This is important because it ensures that the hypothesis test is comprehensive and covers all possible outcomes. If there were a third possibility, then the hypothesis test would not be complete, and the results would be inconclusive.

Together, mutual exclusivity and exhaustiveness ensure that the hypothesis test is well-defined and produces unambiguous results. This is crucial in scientific research and statistical analysis, where the results of hypothesis testing can have significant implications for further investigation or decision-making.

To know more about hypothesis, visit:

https://brainly.com/question/31319397

#SPJ1

The system of congruences has a unique solution, which is x ≡ 0 (mod 30).  All three congruences are solvable and have a unique solution.

To solve this problem, we can use the Chinese Remainder Theorem.

First, we need to check if the moduli (the numbers on the right side of the congruences) are pairwise relatively prime. In this case, we have 2, 3, and 5, which are all prime and therefore pairwise relatively prime.

Next, we can use the formula for the solution of a system of congruences using the Chinese Remainder Theorem:

x ≡ a1 (mod m1)
x ≡ a2 (mod m2)
...
x ≡ ak (mod mk)

where m1, m2, ..., mk are pairwise relatively prime and a1, a2, ..., ak are integers. The solution is given by:

x ≡ (a1M1y1 + a2M2y2 + ... + akMkyk) (mod M)

where M = m1m2...mk, Mi = M/mi, and yi is the inverse of Mi modulo mi.

In this case, we have:

x ≡ 2 (mod 2)
x ≡ 2 (mod 3)
x ≡ 2 (mod 5)

Using the formula above, we have:

M = 2×3×5 = 30
M1 = 15, M2 = 10, M3 = 6
y1 = 1, y2 = 3, y3 = 5

x ≡ (2×15×1 + 2×10×3 + 2×6×5) (mod 30)
x ≡ (30 + 60 + 60) (mod 30)
x ≡ 0 (mod 30)

Therefore, the system of congruences has a unique solution, which is x ≡ 0 (mod 30).

So, in conclusion, all three congruences are solvable and have a unique solution.

To learn more about congruences here:

brainly.com/question/7888063#

#SPJ11

The probability of number of strings in two digits followed by a letter is 2600,

The probability of the mean contents of the 625 sample cans being less than 11.994 ounces can be calculated using the Z-score formula.

This formula takes into account the mean and standard deviation of the sample and the size of the sample.

The formula is Z = (x - μ) / (σ / √n),

Where,

x is the value we are looking for,

μ is the mean of the sample,

σ is the standard deviation of the sample and

n is the size of the sample.

In this case, x = 11.994, μ = 12, σ = 0.12, and n = 625.

The Z-score is then calculated to be -0.166, which corresponds to a probability of 0.106.

This means that there is a 0.106 probability that the mean contents of the 625 sample cans is less than 11.994 ounces.

The number of bit strings of length nine:

[tex]2^9[/tex] = 512 (Answer: 1)
The number of functions from a set with five elements to a set with four elements:

[tex]4^5[/tex] = 1024 (Answer: 2)
The number of one-to-one functions from a set with three elements to a set with eight elements:

8P3 = 8*7*6

= 336 (Answer: 3)
The number of strings of two digits followed by a letter:

10 X 10 X 26 = 2600 (Answer: 4)
So the correct matching is:
1 -> 1,
2 -> 2,
3 -> 3,
4 -> 4.

For similar question on probability:

https://brainly.com/question/30034780

#SPJ11

The conditional PDF of X given Y = y is a geometric distribution with parameter 1-p.

Let X be a geometric random variable with parameter p, and let Y be a uniform random variable on the interval [0,1], which means the PDF of Y is fY(y) = 1 for 0 ≤ y ≤ 1 and 0 otherwise. We want to find the conditional PDF of X given Y = y.

By Bayes' theorem, the conditional PDF of X given Y = y is given by:

fX|Y(x|y) = fY|X(y|x) fX(x) / fY(y)

where fX(x) is the PDF of X, which is given by fX(x) = (1-p)^(x-1) p for x = 1, 2, 3, ..., and fY|X(y|x) is the PDF of Y given X = x, which is given by fY|X(y|x) = 1 for 0 ≤ y ≤ p and 0 otherwise.

To find fY(y), we use the law of total probability:

fY(y) = ∑ fX(x) fY|X(y|x) for all x

Plugging in the values of fX(x) and fY|X(y|x), we get:

fY(y) = ∑ (1-p)^(x-1) p for 0 ≤ y ≤ p and 0 otherwise.

Since Y is uniform on [0,1], we have fY(y) = 1 for 0 ≤ y ≤ 1 and 0 otherwise. Therefore, the above sum simplifies to:

∑ (1-p)^(x-1) p = p / (1 - (1-p)) = 1

Now we can plug in the values of fY(y) and fX(x|y) into the formula for the conditional PDF of X given Y = y:

fX|Y(x|y) = fY|X(y|x) fX(x) / fY(y)

fX|Y(x|y) = (1/p) (1-p)^(x-1) p / 1 = (1-p)^(x-1)

Thus, the conditional PDF of X given Y = y is a geometric distribution with parameter 1-p.

To learn more about conditional visit:

https://brainly.com/question/29418564

#SPJ11

Answer:

11 1/9

Step-by-step explanation:

if 9 centimetres is equal to 1 metre (100)centimetres

100/9 or 100÷9 (centimetres )

To get 11 1/9 as the scale factor

To find the radius of convergence, we can use the ratio test.

Let's apply the ratio test to the series:

sigma^[infinity]_n=1 4(−1)^n nx^n

The ratio test tells us that the series converges if the limit of the absolute value of the ratio of the (n+1)th term to the nth term is less than 1:

lim n -> infinity |a_n+1 / a_n| < 1

where a_n = 4*(-1)^n * n * x^n.

Let's compute the ratio of the (n+1)th term to the nth term:

|a_n+1 / a_n| = |4*(-1)^(n+1) * (n+1) * x^(n+1) / (4*(-1)^n * n * x^n)|

             = |(n+1) / n| * |x|

             = (n+1) / n * |x|

We want to find the values of x for which the above limit is less than 1. So we need to solve the inequality:

lim n -> infinity (n+1) / n * |x| < 1

Taking the limit as n approaches infinity, we get

lim n -> infinity (n+1) / n * |x| = |x|

lim n -> infinity (n+1) / n * |x| = |x|

So the inequality reduces to:

|x| < 1

Therefore, the radius of convergence R is 1.

Visit here to learn more about radius brainly.com/question/13449316

#SPJ11

Check the picture below.

so we have a cube with a pyramidical hole, so let's just get the volume of the whole cube and subtract the volume of the pyramid, what's leftover is the part we didn't subtract, the cube with the hole in it.

[tex]\textit{volume of a pyramid}\\\\ V=\cfrac{Bh}{3} ~~ \begin{cases} B=\stackrel{base's}{area}\\ h=height\\[-0.5em] \hrulefill\\ B=\stackrel{6\sqrt{2}\times 6\sqrt{2}}{72}\\ h=12 \end{cases}\implies V=\cfrac{72\cdot 12}{3}\implies 288 \\\\[-0.35em] ~\dotfill\\\\ \stackrel{ \textit{\LARGE volumes} }{\stackrel{ cube }{12^3}~~ - ~~\stackrel{ pyramid }{288}}\implies \text{\LARGE 1440}~in^3[/tex]

Step-by-step explanation:

they are similar, that means for our case here that they're is one central scaling factor for all sides between the 2 triangles.

by looking at the forms of both triangles, we see that

ET corresponds to TR.

FT corresponds to TS.

FE corresponds to RS.

for TE and TR we have the length information :

25 and 40

so, the scaling factor between these 2 corresponding sides can then be used for the other pairs of corresponding sides.

the scaling factor to go from the large to the small triangle is

25/40 = 5/8

therefore,

FT = TS × 5/8 = 22 × 5/8 = 11×5/4 = 55/4 = 13.75

FE = RS × 5/8 = 54 × 5/8 = 27×5/4 = 33.75

the perimeter of TFE is therefore

25 + 13.75 + 33.75 = 72.5