The force required to stretch the spring an additional 4.00 cm is 10.00 NN.
According to Hooke's Law, the force required to stretch or compress a spring is directly proportional to the displacement. The formula for Hooke's Law is:
F = k * x
where F is the force applied, k is the spring constant, and x is the displacement from the equilibrium position.
In this case, we are given that a force of 5.00 NN is required to stretch the spring by 2.00 cm. Let's use this information to calculate the spring constant, k:
5.00 NN = k * 2.00 cm
To simplify the calculation, we need to convert centimeters to meters:
5.00 NN = k * 0.02 m
Now we can solve for k:
k = 5.00 NN / 0.02 m
k = 250.00 N/m
Now that we have the spring constant, we can calculate the force required to stretch the spring an additional 4.00 cm. Let's denote this force as F2:
F2 = k * x2
where x2 is the displacement of 4.00 cm or 0.04 m:
F2 = 250.00 N/m * 0.04 m
F2 = 10.00 N
Therefore, it takes a force of 10.00 N to stretch the spring an additional 4.00 cm.
The force required to stretch the spring an additional 4.00 cm is 10.00 N.
To learn more about force, visit
https://brainly.com/question/28572157
#SPJ11
explain (a) how it is possible for a large force to produceonly a small, or even zero, torwue, and (b) how is it possible fora small force to produce a large torque
(a) Yes, it is possible for a large force to produce only a small or zero torque when the line of action of the force does not create a moment arm or when the force is applied directly through the axis of rotation.
(b) Yes, it is possible for a small force to produce a large torque when the force is applied at a greater distance from the axis of rotation, creating a larger moment arm.
Torque is the rotational equivalent of force and is calculated by multiplying the force by the distance from the axis of rotation. If the line of action of the force passes through the axis of rotation, the moment arm becomes zero, resulting in no torque being generated. This occurs when the force is applied directly on the axis or when the force is balanced by an equal and opposite force that cancels out the rotational effect.
Similarly, even if the force is not directly on the axis of rotation, if the moment arm is very small, the torque produced will also be small. The moment arm is the perpendicular distance between the axis of rotation and the line of action of the force. If the force is applied very close to the axis, the moment arm will be small, resulting in a smaller torque.
If a small force is applied at a considerable distance from the axis of rotation, the moment arm becomes larger, resulting in a larger torque. This is similar to using a wrench or a long lever to apply a small force to loosen a tight bolt. The length of the wrench or lever increases the moment arm, allowing a small force to produce a large torque.
To know more about torque here
https://brainly.com/question/31323759
#SPJ4
A uniform magnetic field passes through a horizontal circular wire loop at an angle 15.1� from the vertical. The magnitude of the magnetic field changes in time according to, B(t) = (3.75T) + (2.75 T/s)t + (-6.05 T/s2)t2. The radius of the wire loop is 0.270 m, find the magnitude of the induced emf in the loop when t = 5.47 s
At t = 5.47 s, the magnitude of the induced emf in the loop is approximately 63.437 volts.
To find the magnitude of the induced electromotive force (emf) in the loop at a specific time, we can use Faraday's law of electromagnetic induction.
According to Faraday's law, the emf induced in a closed loop is equal to the rate of change of magnetic flux through the loop.
The magnetic flux through the loop is given by the formula:
Φ = B⋅A⋅cosθ
Where:
Φ is the magnetic flux,
B is the magnetic field,
A is the area of the loop, and
θ is the angle between the magnetic field and the normal to the loop.
Given:
B(t) = (3.75 T) + (2.75 T/s)t + (-6.05 T/[tex]s^2[/tex])[tex]t^2[/tex] (time-varying magnetic field)
θ = 15.1° (angle between the magnetic field and the vertical)
r = 0.270 m (radius of the loop)
t = 5.47 s (specific time)
First, let's find the magnetic field at the given time t = 5.47 s:
B(5.47) = (3.75 T) + (2.75 T/s)(5.47 s) + (-6.05 T/[tex]s^2[/tex])[tex](5.47 s)^2[/tex]
B(5.47) = 3.75 T + 15.0425 T + (-175.1383 T)
B(5.47) ≈ -156.348 T
Now, let's calculate the magnetic flux at the given time:
Φ = B(t)⋅A⋅cosθ
The area of the loop A is given by the formula: [tex]A = \pi r^2[/tex]
A = π[tex](0.270 m)^2[/tex]
Φ = (-156.348 T)⋅(π[tex](0.270 m)^2[/tex])⋅cos(15.1°)
Φ ≈ -156.348 T⋅0.22946[tex]m^2[/tex]⋅0.96593
Φ ≈ -34.407 Wb (we obtain a negative value for the flux due to the cosine of the angle)
Finally, the magnitude of the induced emf in the loop is given by the rate of change of magnetic flux with respect to time:
emf = -dΦ/dt
To find the derivative, we differentiate the given magnetic field equation with respect to time:
dB(t)/dt = (2.75 T/s) + (-12.1 T/[tex]s^2[/tex])t
emf = -(dΦ/dt) = -(-(dB(t)/dt))
emf = (2.75 T/s) + (-12.1 T/[tex]s^2[/tex])(5.47 s)
emf ≈ 2.75 T/s + (-66.187 T/s)
emf ≈ -63.437 T/s
Therefore, at t = 5.47 s, the magnitude of the induced emf in the loop is approximately 63.437 volts.
To learn more about magnetic field visit:
brainly.com/question/1594227
#SPJ11
voltage of the battery is 13.4 V when it is delivering 24.0 W of power to an external load resistor R.
(a) What is the value of R?
Ω
(b) What is the internal resistance of the battery?
Ω
The value of the load resistor (R) is approximately 7.47 Ω. The internal resistance of the battery is approximately 2.64 Ω.
To determine the value of the load resistor (R) and the internal resistance of the battery, we can use Ohm's law and the power formula. Let's break down the calculations for each part:
(a) Finding the value of R:
The power (P) delivered to the load resistor can be calculated using the formula P = V²/R, where V is the voltage and R is the resistance. Given that the power delivered is 24.0 W and the voltage is 13.4 V, we can rearrange the formula to solve for R:
R = V²/P = (13.4 V)² / 24.0 W ≈ 7.47 Ω.
(b) Determining the internal resistance of the battery:
The total voltage (V_total) across the battery can be calculated by adding the voltage drop across the load resistor (V_load) to the voltage drop across the internal resistance of the battery (V_internal).
We know that V_total = V_load + V_internal = 13.4 V.
Since V_load = IR (Ohm's law), where I is the current flowing through the circuit, we can substitute I = P/V_load = 24.0 W / 13.4 V.
Substituting these values into the equation, we have 13.4 V = (24.0 W / 13.4 V)R + V_internal.
To solve for V_internal, we rearrange the equation as follows:
V_internal = 13.4 V - (24.0 W / 13.4 V)R.
Substituting the values of V, P, and R, we find:
V_internal ≈ 13.4 V - (24.0 W / 13.4 V)(7.47 Ω) ≈ 2.64 Ω.
Learn more about resistor:
https://brainly.com/question/24858512
#SPJ11
two concave lenses, each with fff = -16 cmcm, are separated by 8.5 cmcm. an object is placed 35 cmcm in front of one of the lenses. Express your answer using two significant figures.
The image distance from the second lens is approximately 36.4 cm.
What is a lens?
A lens is a transparent optical device that has the ability to refract (bend) and focus light. It consists of a piece of transparent material, such as glass or plastic, that has curved surfaces.
1/f = 1/v - 1/u
Given:
The focal length of each lens (fff) is -16 cm (since it's concave, the focal length is negative).
The lenses are separated by 8.5 cm.
The object distance (u) is 35 cm.
Let's denote the image distance from the first lens as v₁ and the image distance from the second lens as v₂.
From the first lens:
1/f₁ = 1/v₁ - 1/u
Substituting the values:
1/-16 = 1/v₁ - 1/35
Simplifying:
-1/16 = (35 - v₁) / (35v₁)
Cross-multiplying and rearranging:
35v₁ - v₁^2 = -16 * 35
Simplifying further:
v₁^2 - 35v₁ - 560 = 0
We can solve this quadratic equation to find the value of v₁. Using the quadratic formula:
v₁ = (-b ± √(b^2 - 4ac)) / 2a
For the given equation:
a = 1, b = -35, c = -560
v₁ = (-(-35) ± √((-35)^2 - 4 * 1 * -560)) / (2 * 1)
v₁ = (35 ± √(1225 + 2240)) / 2
v₁ = (35 ± √3465) / 2
We take the positive value since v₁ represents a real image. Using a calculator, we find:
v₁ ≈ 44.9 cm (rounded to two significant figures)
Now, we can find the image distance (v₂) from the second lens:
v₂ = v₁ - 8.5 cm
v₂ ≈ 44.9 cm - 8.5 cm
v₂≈ 36.4 cm (rounded to two significant figures)
Therefore, the image distance from the second lens is approximately 36.4 cm.
To learn more about lens,
https://brainly.com/question/28039799
#SPJ4
the power dissipated in a series rcl circuit is 65.0 w, and the current is 0.530 a. the circuit is at resonance. determine the voltage of the generator.
The voltage of the generator in the series RCL circuit at resonance is approximately 122.64 volts.
To determine the voltage of the generator in a series RCL circuit, we need to use the power and current values. In a series RCL circuit at resonance, the power dissipated is equal to the power supplied by the generator.
In this case:
Power dissipated (P) = 65.0 W
Current (I) = 0.530 A
The formula for power in an electrical circuit is:
P = VI
Where:
P is the power in watts
V is the voltage in volts
I is the current in amperes
Rearranging the formula to solve for voltage (V), we get:
V = P / I
Substituting the given values:
V = 65.0 W / 0.530 A
V ≈ 122.64 volts
Learn more about voltage here:
https://brainly.com/question/31963785
#SPJ11
8. how do you explain the decrease in wave speed in layer b?
The decrease in wave speed in layer B can be explained by the change in the properties of the medium through which the wave is propagating. Generally, the speed of a wave depends on the properties of the medium it is traveling through, such as the density and elasticity.
There are several factors that can lead to a decrease in wave speed in layer B:
Change in Density: If the density of the medium increases in layer B compared to layer A, it will result in a decrease in wave speed. This is because a denser medium tends to slow down the propagation of waves.
Change in Elasticity: If the elasticity (or stiffness) of the medium decreases in layer B compared to layer A, it can cause a decrease in wave speed. A less elastic medium offers more resistance to wave propagation, resulting in slower wave speed.
Change in Temperature: In some cases, temperature variations can affect the properties of the medium. For example, in the case of sound waves, as temperature increases, the speed of sound generally increases due to an increase in the elasticity and average kinetic energy of the molecules. Conversely, a decrease in temperature can lower the wave speed.
To know more about wave speed
https://brainly.com/question/29798763
#SPJ4
fill in the blank.the 2018 ford explorer gets 22 _______, slightly better gas mileage than previous year’s models.
The 2018 Ford Explorer gets 22 miles per gallon (mpg), slightly better gas mileage than previous year’s models. In the case of the 2018 Ford Explorer, engineers and designers likely implemented design improvements and optimizations to enhance its fuel economy.
The 2018 Ford Explorer achieves a fuel efficiency of 22 miles per gallon (mpg), which represents a slight improvement compared to the gas mileage of previous year's models. This measurement indicates the distance in miles that the vehicle can travel on one gallon of fuel. With 22 mpg, the 2018 Explorer demonstrates enhanced fuel economy, which can be attributed to various factors such as advancements in engine technology, aerodynamics, and efficiency optimizations. These may include the use of lightweight materials to reduce vehicle weight, aerodynamic enhancements to reduce drag, and engine advancements such as improved combustion efficiency and transmission optimization. Collectively, these efforts contribute to the slight increase in gas mileage compared to previous models.
To learn more about fuel economy, Click here:
https://brainly.com/question/30724675
#SPJ11
can someone help me but please no links
Answer:
1. sand and water
2. suspension
mark me as brainliest plz
calculate the coulomb energy and the repulsion energy for NaCl ionic crystal at ists equrilibrium separation
To calculate the Coulomb energy and the repulsion energy for a NaCl ionic crystal at its equilibrium separation, we need to consider the ionic charges and the crystal lattice structure.
In NaCl, sodium (Na) has a +1 charge, and chloride (Cl) has a -1 charge. The crystal structure of NaCl is a face-centered cubic (FCC) lattice.
The Coulomb energy is the electrostatic interaction energy between the charged ions. It can be calculated using Coulomb's law:
Coulomb energy ([tex]E_{coul[/tex]) = (1 / 4πε₀) * Σ([tex]q_i * q_j[/tex]) / [tex]r_{ij[/tex]
Where:
ε₀ is the vacuum permittivity (8.854 × [tex]10^{-12}[/tex] C²/N·m²)
[tex]q_i[/tex] and [tex]q_j[/tex] are the charges of the ions
[tex]r_{ij[/tex] is the distance between ions i and j
The repulsion energy arises from the repulsion between the ions due to overlapping electron clouds. It can be approximated using an empirical expression known as the Born-Mayer equation:
Repulsion energy ([tex]E_{rep[/tex]) = A * exp(-B * r)
Where:
A and B are empirical constants specific to the crystal
r is the distance between ions
Now, let's assume the equilibrium separation ([tex]r_{eq}[/tex]) for NaCl at room temperature, which is approximately 2.82 Å (angstroms).
Using these values, we can calculate the Coulomb energy and the repulsion energy for NaCl at its equilibrium separation. However, the specific values of A and B for NaCl are required to obtain an accurate result.
These values are not readily available, and their determination involves experimental measurements and/or computational calculations beyond the scope of this text-based conversation.
Therefore, without the precise values of A and B, we cannot provide an exact numerical calculation of the Coulomb energy and the repulsion energy for NaCl at its equilibrium separation.
To learn more crystal lattice structure visit:
brainly.com/question/30049286
#SPJ11
the radii of the pedal sprocket the wheel sprocket and the wheel of the bicycle
The radii of the pedal sprocket, the wheel sprocket, and the wheel of a bicycle can vary depending on the specific bicycle model and design.
There is no standard or fixed value for these radii as they can differ from one bicycle to another. The radii are typically determined by the manufacturer and are based on factors such as the intended use of the bicycle, gear ratios, and desired performance characteristics. The pedal sprocket is the smaller sprocket attached to the pedals of the bicycle. It is responsible for transferring the rider's pedaling force to the drivetrain of the bicycle. The radius of the pedal sprocket is generally smaller compared to the wheel sprocket and wheel. The wheel sprocket, also known as the rear sprocket or cassette, is located on the rear wheel of the bicycle. It engages with the chain and is responsible for transferring power from the pedals to the wheel. The radius of the wheel sprocket is usually larger compared to the pedal sprocket.
To learn more about specific bicycle model, Click here:
https://brainly.com/question/13308530
#SPJ11
In recent years it has been possible to buy a 1. 0 F capacitor. This is an enormously large amount of capacitance. Suppose you want to build a 1. 1 Hz oscillator with a 1. 0 F capacitor. You have a spool of 0. 25-mm-diameter wire and a 4. 0-cm-diameter plastic cylinder.
How long must your inductor be if you wrap it with 2 layers of closely spaced turns?
An oscillator is an electronic device that produces an electrical signal at a specific frequency. A capacitor is an electrical component that stores electrical energy. In recent years, it has become possible to purchase a 1.0 F capacitor. This is an incredibly large amount of capacitance.
Suppose you want to build a 1.1 Hz oscillator using a 1.0 F capacitor and a spool of 0.25-mm-diameter wire and a 4.0-cm-diameter plastic cylinder. We can calculate the required inductance value using the formula:f = 1/2π√(L*C)Where f is the desired frequency, L is the inductance value, and C is the capacitance value. Substituting the given values:
[tex]f = 1.1 HzC = 1.0 F[/tex]
Plugging these values into the formula and solving for L:
1.1 Hz = 1/2π√(L*1.0 F)2π*1.1 Hz = √(L*1.0 F)6.88 Hz2 = L*1.0 F6.88 H/ F = LL = 6.88 H
[tex]1.1 Hz = 1/2π√(L*1.0 F)2π*1.1 Hz = √(L*1.0 F)6.88 Hz2 = L*1.0 F6.88 H/ F = LL = 6.88 H[/tex]We need to wrap this inductance value with two layers of closely spaced turns around the plastic cylinder.
The inner diameter of the cylinder is equal to the diameter of the wire, which is 0.25 mm or 0.00025 m. Therefore:d = 0.00025 mThe outer diameter of the cylinder is 4.0 cm or 0.04 m. Therefore:D = 0.04 mPlugging these values into the formula for A:
[tex]A = (π/4)(0.04² - 0.00025²)A = 0.001257 m²[/tex]
Plugging these values into the formula for L:
[tex]L = µn²A/lSolving for l:l = µn²A/L[/tex]
Plugging in the given values:
[tex]µ = 4π x 10^-7 H/mn = 2[/tex]
(since we want two layers)
[tex]A = 0.001257 m²L = 6.88 Hl = (4π x 10^-7 H/m)(2²)(0.001257 m²)/(6.88 H)l ≈ 0.0015 m[/tex] or 1.5 mm
Therefore, the length of the inductor should be approximately 1.5 mm.
To know more about oscillator visit :
https://brainly.com/question/31835791
#SPJ11
A space probe in remote outer space continues moving
A) because a force acts on it. B) in a curved path.
C) even though no force acts on it. D) due to gravity.
Option (A) because a force acts on it , is the correct option .
A space probe in remote outer space continues moving because a force acts on it.
According to Newton's first law of motion, an object will continue to move in a straight line at a constant velocity unless acted upon by an external force. In the case of a space probe in remote outer space, several forces can act on it to maintain its motion.
One of the significant forces at play is gravity. While space is mostly empty, gravitational forces from celestial bodies can still influence the probe's trajectory. If the probe is near a massive object like a planet or a star, the gravitational force exerted by that object can provide the necessary force to keep the probe moving. In this scenario, the probe would move in a curved path around the massive object due to the gravitational force acting as a centripetal force.
Additionally, other forces such as propulsion systems, solar radiation pressure, or gravitational assists from planetary flybys can also act on the space probe, ensuring its continued motion and trajectory adjustments.
A space probe in remote outer space continues moving due to the presence of external forces acting on it. These forces, such as gravity, propulsion systems, solar radiation pressure, or gravitational assists, provide the necessary force to counteract any potential deceleration or deviation from its intended path.
While the probe may move in a curved path due to gravitational forces, it ultimately remains in motion because forces act upon it. Therefore, option A) is the correct choice.
To know more about force ,visit:
https://brainly.com/question/12785175
#SPJ11
a) Highest temperature and pressure in the cycle
b) amount of heat transferred,
c) thermal efficiency, and
d) mean effective pressure. Use constant specific heat approach - k=1.4, cp= 1.005 kJ/kg.K cv= 0.718 kJ/kg.K, R = 0.287 kJ/kg.K 10 points
For an otto cycle:
a) Highest temperature and pressure are 1000K and 2.5 MPa.
b) amount of heat transferred, 150.2 kJ/kg
c) thermal efficiency, 56.5%
d) mean effective pressure is 1.31 MPa.
How to solve for an otto cycle?Given:
Initial conditions T1 = 27C = 300K, P1 = 100 kPa = 100 × 10³ Pa, V1 = 500 cm³ = 500 × 10⁻⁶ m³
Compression ratio (r) = V1/V2 = 10
End of isentropic expansion T3 = 1000 K
Specific heat ratio (k) = 1.4
Specific heat at constant pressure (cp) = 1.005 kJ/kg.K = 1005 J/kg.K
Specific heat at constant volume (cv) = 0.718 kJ/kg.K = 718 J/kg.K
Gas constant (R) = 0.287 kJ/kg.K = 287 J/kg.K
a) Highest temperature and pressure in the cycle:
At the end of the isentropic compression (point 2), we use the relation T2 = T1 × (V1/V2)^(k-1)
⇒ T2 = 300 K × 10^(1.4-1) = 300 K × 10^0.4 = 509 K
The pressure at the end of the compression stroke (point 2) is given by P2 = P1 × (V1/V2)^k
⇒ P2 = 100 × 10³ Pa × 10^1.4 = 2.5 MPa
The maximum temperature T3 is given in the problem as 1000K.
The maximum pressure in the cycle is the pressure at point 2, P2 = 2.5 MPa.
b) Amount of heat transferred:
The heat input is during the constant volume process 2-3, given by Q_in = m × cv × (T3 - T2)
But we do not have the mass (m) of the gas, we can calculate the change in internal energy per unit mass as ΔU = cv × (T3 - T2) = 718 J/kg.K × (1000K - 509K) = 352.6 kJ/kg
The heat rejected is during the constant volume process 4-1, given by Q_out = m × cv × (T4 - T1)
Using the adiabatic process, we know that T4 = T1 × (V2/V1)^(k-1) = 300 K × 10^0.4 = 509 K
ΔU = cv × (T4 - T1) = 718 J/kg.K × (509K - 300K) = 150.2 kJ/kg
c) Thermal efficiency:
The thermal efficiency of an Otto cycle is given by η = 1 - 1/(r^(k-1))
⇒ η = 1 - 1/(10^0.4) = 0.565 or 56.5%
d) Mean effective pressure (mep):
The thermal efficiency can also be expressed as η = 1 - V2/V1 = mep/(P2 - P1)
⇒ mep = η × (P2 - P1) = 0.565 × (2.5 MPa - 100 kPa) = 1.31 MPa
Find out more on Otto cycle here: https://brainly.com/question/23723039
#SPJ4
Complete question:
An Otto cycle with compression ratio of 10.The air is at 100 kPa,27C,and 500 cm prior to the compression stroke. Temperature at the end of isentropic expansion is 1000 K. Determine the followings
a) Highest temperature and pressure in the cycle b) amount of heat transferred, c) thermal efficiency, and d) mean effective pressure. Use constant specific heat approach - k=1.4, cp= 1.005 kJ/kg.K cv= 0.718 kJ/kg.K, R = 0.287 kJ/kg.K 10 points
which, if either, of the forces pictured as acting upon the rod in the diagram will produce a torque about an axis perpendicular to the plane of the diagram at the left end of the rod?
The force F2 will produce a torque about an axis perpendicular to the plane of the diagram at the left end of the rod.
To determine which force produces a torque about an axis perpendicular to the plane of the diagram at the left end of the rod, we need to consider the concept of torque and the position of the forces relative to the axis.
Torque is the rotational equivalent of force and is given by the equation: Torque = Force × Distance × sin(θ), where Force is the magnitude of the force, Distance is the perpendicular distance from the axis of rotation to the line of action of the force, and θ is the angle between the force and the lever arm.
In the given diagram, we have two forces acting on the rod, F1 and F2. The lever arm for each force is the distance from the left end of the rod to the line of action of the force.
For force, F1, the line of action passes through the left end of the rod. Therefore, the lever arm is zero, and sin(θ) is also zero since the angle between the force and the lever arm is 0 degrees. Consequently, the torque produced by force F1 is zero.
For force, F2, the line of action is not passing through the left end of the rod. The lever arm for force F2 is the perpendicular distance from the left end of the rod to the line of action of F2. Since this distance is non-zero and the angle between the force and the lever arm is non-zero, both the distance and sin(θ) are non-zero.
Therefore, the torque produced by force F2 is non-zero and will produce a torque about an axis perpendicular to the plane of the diagram at the left end of the rod.
Out of the two forces pictured, the only force F2 will produce a torque about an axis perpendicular to the plane of the diagram at the left end of the rod. Force F1 will not produce any torque since its line of action passes through the left end of the rod, resulting in a lever arm of zero.
To learn more about torque, visit
https://brainly.com/question/30284972
#SPJ11
Solutes dissolve quicker in _________ water.
warm
cold
cool
when will he love me 
Answer:
When you go bald
Explanation:
what is the volume of water in a 250 cylinder at 0.9999 density
The volume of water in the 250 mL cylinder is approximately 249.975 mL.
To calculate the volume of water, we multiply the density of water by the volume of the cylinder.
Given:
Density of water = 0.9999 g/mL
Volume of the cylinder = 250 mL
The formula for calculating the volume of a substance is:
Volume = Mass / Density
Since we are given the density and we want to find the volume, we rearrange the formula as:
Volume = Mass / Density
The mass can be obtained by multiplying the density by the volume:
Mass = Density * Volume
Substituting the given values:
Mass = 0.9999 g/mL * 250 mL
Simplifying, we get:
Mass = 249.975 g
Therefore, the volume of water in the 250 mL cylinder is approximately 249.975 mL.
To know more about volume, refer here:
https://brainly.com/question/30681924#
#SPJ11
A 1036 nm film with an index of refraction n=2.62 is placed on the surface of glass n=1.52. Light (λ=520.0 nm) falls hits the perpendicular to the surface from air. You want to increase the thickness so the reflected light cancels. What is the minimum thickness of the film that you must add?
Answer:
[tex]55.64\ \text{nm}[/tex]
Explanation:
[tex]\lambda[/tex] = Wavelength falling on film = 520 nm
n = Refractive index of film = 2.62
T = Thickness of film
m = Order
We have the relation
[tex]2T=\dfrac{m\lambda}{n}\\\Rightarrow T=\dfrac{m\lambda}{2n}\\\Rightarrow T=\dfrac{m\times 520}{2\times 2.62}\\\Rightarrow T=99.24m[/tex]
The thickness should be greater than 1036 nm. This means [tex]m=11[/tex]
[tex]T=99.24\times 11=1091.64\ \text{nm}[/tex]
Thickness of the film to be added would be
[tex]\Delta T=1091.64-1036=55.64\ \text{nm}[/tex]
Thickness of the film to be added is [tex]55.64\ \text{nm}[/tex].
Answer:
Explanation:
The ray of light is passing from high refractive index medium to low refractive index medium so condition for cancellation of reflected light is as follows .
2μt = (2n+1) λ/2
where μ is refractive index of the medium , t is thickness , λ is wavelength of light and n is a integer .
Putting n = 10
2x 2.62 x t = 21 x 520 / 2 nm
5.24 t = 5460 nm
t = 1042 nm
Thickness required to be added
= 1042 - 1036 = 6 nm .
If the current of a circuit is 1.5 A, and the power is 24 W. what is the resistor?
Answer:
The resistor has a resistance of 10.667 ohms.
Explanation:
By Ohm's Law, voltage ([tex]V[/tex]), in volts, is directly proportional to the current ([tex]i[/tex]), in amperes, and by definition of power ([tex]\dot W[/tex]), in watts, we have the following formula:
[tex]\dot W = i^{2}\cdot R[/tex] (1)
Where [tex]R[/tex] is the resistance, in ohms.
If we know that [tex]\dot W = 24\,W[/tex] and [tex]i = 1.5\,A[/tex], then the resistance of the resistor is:
[tex]R = \frac{\dot W}{i^{2}}[/tex]
[tex]R = 10.667\,\Omega[/tex]
The resistor has a resistance of 10.667 ohms.
Twisting a bone along its longitudinal axis toward the midline of the body is ____________ .Twisting a bone along its longitudinal axis away from the midline of the body is ____________ .Rotation of the forearm, as if you're asking someone to hand you money or slap down on your hand, is called ____________ .Rotation of the forearm, as if you're turning over a can to empty it, is called ____________ .Movement of the thumb to approach and touch the fingertips is called ____________ .
Answer: Medial rotation
Lateral rotation
Supination
Pronation
Opposition
Explanation:
Medial rotation can be defined as the rotation of any of the body part towards the middle axis of the body. For example, movement of leg bones so that the toes are pointed towards inward.
Lateral rotation is the movement of the body parts or bones away from the middle axis of the body. For example. outward circle created by the upper limbs directed outwards.
Supination is the rotation of the forearm in such a way so that the palm is directed upwards so that hand can receive money or hand can slap a person.
Pronation is the downward motion of hand to put things down.
Opposition is the movement of the bones of the fingers the metacarpals which allow the thumb to touch the fingertips.
PLEASEE HELP!!!!!!Why are the youth not getting involved in their communities and voting? How is media influencing the voters?
Answer:
because they are underaged and prob dont care and also the gov thinks that the youth cant make a reasonable decision for them selves for sum like that and the media influnces them to by saying whats going on and who supports who
Which human activity causes the most erosion?
А
building a bridge over a river
B
cutting down trees for lumber
С
building a dam in a stream
D
planting crops in a field
Answer:
B
Explanation:
A stamp collector uses a converging lens with focal length 28 cm to view a stamp 16 cm in front of the lens. Find the image distance. Follow the sign conventions for lenses Give your answer in cm.
The image distance from the converging lens is 10.2 cm.
The focal length of the converging lens, f = 28 cm
The distance of the object from the converging lens, u = -16 cm
The optical center or axis of a convergent lens serves as the focal point for light, a lens that generates a real image by converting parallel light beams to convergent light rays.
The image is real and inverted so long as the item is not in the center of the lens.
According to the lens formula,
1/v + 1/u = 1/f
1/v = 1/f - 1/u
1/v = 1/28 - 1/-16
1/v = 1/28 + 1/16
1/v = 44/448
Therefore, the image distance from the converging lens is,
v = 448/44
v = 10.2 cm
To learn more about converging lens, click:
https://brainly.com/question/29178301
#SPJ4
yo i really need help please in order to pass this i’ll give a brainliest to anyway who knows the correct answer please no links
You toss a ball straight up into the air. Assume that air resistance is negligible.
PART A. Draw a free-body diagram for the ball at three points: on the way up, at the top, and on the bottom, and on the way down. Specifically identify the forces and agents acting on the ball.
PART B. What is the ball's velocity at the very top of the motion?
PART C. What is the ball's acceleration at this point?
Answer:
the answer is B I promise
An AC source operating at 60Hz with a maximum voltage of 170V is connected in series with a resistor (R=1.2kΩ) and a capacitor (C=2.5μF). (a) What is the maximum value of the current in the circuit (b) What are the maximum values of the potential difference across the resistor and the capacitor? (c) When the current is zero, what are the magnitudes of the potential differences across the resistor, the capacitor and the AC source How much charge is on the capacitor at this instant (d) When the current is maximum, what are the magnitudes of the potential differences across the resistor, the capacitor, and the AC source? How much charge is on the capacitor at this instant?
The maximum value of the current in the circuit is approximately 0.1298 A. The maximum values of the potential difference across the resistor and the capacitor are equal to the maximum voltage (170 V) because they are in series with the AC source.
To solve this problem, we can use the concepts of AC circuit analysis and impedance.
Given:
Frequency (f) = 60 Hz
Maximum voltage [tex]\[V_\text{max}[/tex]) = 170 V
Resistance (R) = 1.2 kΩ = 1200 Ω
Capacitance (C) = 2.5 μF = 2.5 x 10⁻⁶ F
(a) The maximum value of the current in the circuit can be calculated using Ohm's law:
[tex]Imax = \frac{Vmax}{Z}[/tex]
where Z is the impedance of the circuit.
For a series RL circuit like this, the impedance Z is given by:
[tex]\[Z = \sqrt{R^2 + (X_c - X_l)^2}\][/tex]
where [tex]\[X_c[/tex] is the capacitive reactance and [tex]\[X_I[/tex] is the inductive reactance.
The capacitive reactance [tex]\[X_c[/tex] is given by:
[tex]\[X_c = \frac{1}{2\pi fC}\][/tex]
The inductive reactance Xl is given by:
Xl = 2πfL
However, since there is no inductor in the circuit (only a resistor and a capacitor), the inductive reactance is zero ([tex]\[X_I[/tex] = 0).
Substituting the values, we can calculate the maximum current:
[tex]\[X_c = \frac{1}{2\pi \cdot 60 \cdot 2.5 \cdot 10^{-6}}\][/tex]
≈ 530.66 Ω
[tex]\[Z = \sqrt{1200^2 + (530.66 - 0)^2}\][/tex]
≈ 1311.79 Ω
[tex]\[I_\text{max} = \frac{170 \text{ V}}{1311.79 \Omega}\][/tex]
≈ 0.1298 A
Therefore, the maximum value of the current in the circuit is approximately 0.1298 A.
(b) The maximum values of the potential difference across the resistor and the capacitor are equal to the maximum voltage ([tex]\[V_\text{max}[/tex]) because they are in series with the AC source. So:
Potential difference across the resistor = [tex]\[V_\text{max}[/tex]
Potential difference across the capacitor = [tex]\[V_\text{max}[/tex]
(c) When the current is zero, the potential difference across the resistor and the capacitor is zero because there is no current flowing through them. However, the potential difference across the AC source remains the same, which is the maximum voltage ([tex]\[V_\text{max}[/tex]). So:
Potential difference across the resistor = 0 V
Potential difference across the capacitor = 0 V
Potential difference across the AC source = [tex]\[V_\text{max}[/tex]
The magnitude of the potential difference across the AC source remains the same as the maximum voltage ([tex]\[V_\text{max}[/tex]).
To find the charge on the capacitor when the current is zero, we can use the equation:
Q = C * V
where Q is the charge, C is the capacitance, and V is the potential difference across the capacitor.
Q = (2.5 x 10⁻⁶ F) * 0 V
= 0 C
Therefore, the charge on the capacitor when the current is zero is 0 C.
(d) When the current is at its maximum value ([tex]\[I_\text{max}[/tex]), the potential difference across the resistor is given by Ohm's law:
Potential difference across the resistor = [tex]\[I_\text{max}[/tex] * R
= 0.1298 A * 1200 Ω
= 155.76 V
The potential difference across the capacitor can be found using the equation:
Potential difference across the capacitor =[tex]\[I_\text{max}[/tex] * [tex]\[X_c[/tex]
Potential difference across the capacitor = 0.1298 A * 530.66 Ω
= 69.75 V
The potential difference across the AC source remains the same as the maximum voltage ([tex]\[V_\text{max}[/tex]), which is 170 V.
To find the charge on the capacitor when the current is at its maximum, we can use the equation:
Q = C * V
Q = (2.5 x 10⁻⁶ F) * 69.75 V
≈ 0.0001744 C
Therefore, the charge on the capacitor when the current is at its maximum is approximately 0.0001744 C.
To know more about the maximum voltage refer here :
https://brainly.com/question/2921287#
#SPJ11
kid is bouncing on a pogo stick. he oscillates 22.0 times in 14.9 s. What is his period?
Answer:
Period = 0.68 seconds
Explanation:
Given the following data;
Number of oscillation = 22
Time = 14.9 seconds
To find the period;
Method I.
Period = time/number of oscillation
Period = 14.9/22
Period = 0.68 seconds.
Method II.
We would find the frequency of the wave;
Frequency = time/number of oscillation
Frequency = 22/14.9
Frequency = 1.48 Hertz
Next, we find the period;
Period = 1/frequency
Period = 1/1.48
Period = 0.68 seconds
Consider a diffraction grating through which monochromatic light (of unknown wavelength) has a first-order maximum at 17.5°. At what angle, in degrees, does the diffraction grating produce a second-order maximum for the same light? Numeric : A numeric value is expected and not an expression. θ2 =
The angle at which the second-order maximum is produced in the diffraction grating is 36.97°.
Angle at which the first-order maximum is produced, θ₁ = 17.5°
The equation for the diffraction grating is given by,
nλ = 2d sinθ
Given that the same light is used for both diffraction grating procedures. The equation for wavelength can be given as,
λ = 2d sinθ/n
So, we can say that,
λ₁ = λ₂
2d sinθ₁/n₁ = 2d sinθ₂/n₂
sinθ₁/n₁ = sinθ₂/n₂
So,
sinθ₂ = n₂sinθ₁/n₁
sinθ₂ = 2 x sin(17.5)/1
sinθ₂ = 2 x 0.30071
sinθ₂ = 0.60142
Therefore, the angle at which the second-order maximum is produced is given by,
θ₂ = sin⁻¹(0.60142)
θ₂ = 36.97°
To learn more about diffraction grating, click:
https://brainly.com/question/30409878
#SPJ4
a block has an initial speed of 8.0 m/s up an inclined plane that makes an angle of 32 ∘ with the horizontal. Ignoring friction, what is the block's speed after it has traveled 2.0 m?
The block's speed after it has traveled 2.0 m up the inclined plane, ignoring friction, is approximately 6.19 m/s.
To determine the block's speed after it has traveled 2.0 m up the inclined plane, we can use the principles of kinematics. We'll consider the initial speed, distance traveled, and the angle of the inclined plane.
Using the kinematic equation:
v^2 = u^2 + 2as
where v is the final velocity, u is the initial velocity, a is the acceleration, and s is the distance traveled.
Given that the initial speed (u) is 8.0 m/s and the distance traveled (s) is 2.0 m, we need to find the acceleration (a).
The component of gravity acting down the inclined plane is given by:
mg sin(θ)
where m is the mass of the block and θ is the angle of the inclined plane.
Since there is no friction, the net force along the incline is equal to the component of gravity acting down the incline:
ma = mg sin(θ)
Canceling out the mass (m) on both sides:
a = g sin(θ)
Using the known values of the angle of the inclined plane (θ = 32°) and the acceleration due to gravity (g = 9.8 m/s^2):
a = (9.8 m/s^2) sin(32°)
a ≈ 5.27 m/s^2
Now we can substitute the values into the kinematic equation:
v^2 = u^2 + 2as
v^2 = (8.0 m/s)^2 + 2(5.27 m/s^2)(2.0 m)
v^2 ≈ 64.0 m^2/s^2 + 21.08 m^2/s^2
v^2 ≈ 85.08 m^2/s^2
Taking the square root of both sides:
v ≈ √(85.08 m^2/s^2)
v ≈ 9.23 m/s
Therefore, the block's speed after it has traveled 2.0 m up the inclined plane, ignoring friction, is approximately 9.23 m/s.
The block's speed after it has traveled 2.0 m up the inclined plane, ignoring friction, is approximately 9.23 m/s. This calculation is based on the initial speed, distance traveled, and the angle of the inclined plane, using principles of kinematics.
To know more about Friction visit:
https://brainly.com/question/24386803
#SPJ11
smoke detectors are based on the radioactive decay of americium-241. since multiple detectors are placed in a typical home, which type of radiation would you expect the source to emit?
a) alpha
b) beta
c) gamma
I KNOW THE ANSWER IS ALPHA BUT I DON'T KNOW WHY! PLEASE HELP!
In the case of smoke detectors based on the radioactive decay of americium-241, the type of radiation emitted by the source is alpha radiation.
Alpha particles are composed of two protons and two neutrons, essentially the same as a helium nucleus. They have a positive charge and are relatively large and heavy compared to other types of radiation. Americium-241 undergoes alpha decay, where it spontaneously emits an alpha particle from its nucleus. This decay process results in the production of a daughter nucleus and the release of an alpha particle, which consists of two protons and two neutrons. Alpha particles have a low penetrating power and can be easily stopped by a sheet of paper or a few centimeters of air. This characteristic makes them ideal for use in smoke detectors because they can ionize the air inside the detector chamber, allowing for the detection of smoke particles.
In contrast, beta and gamma radiation are not typically used in smoke detectors. Beta particles are high-energy electrons or positrons, while gamma rays are high-frequency electromagnetic waves. These types of radiation have higher penetrating power and would not be as effective in ionizing the air for smoke detection purposes. Therefore, the most likely type of radiation emitted by the americium-241 source in a smoke detector is alpha radiation.
Learn more about Alpha particles here:
https://brainly.com/question/24276675
#SPJ11
Three point charges are arranged along the x-axis. Charge q1 = +3.00 μC is at the origin, and charge q2 = -5.00 μC is at x = 0.200 mm. Charge q3 = -8.00 μC.
Where is q3q3 located if the net force on q1q1 is 7.00 N in the −x direction? Express your answer in meters.
The q3q3 is located at approximately x = -0.119 m on the x-axis. when the net force on q1q1 is 7.00 N.
Given:
Charge q1 = +3.00 μC at the origin (x = 0 m).
Charge q2 = -5.00 μC at x = 0.200 mm = 0.0002 m.
Charge q3 = -8.00 μC (location unknown).
We need to determine the location of q3 such that the net force on q1 is 7.00 N in the -x direction.
The force between two charges can be calculated using Coulomb's law:
F = k * |q1 * q2| / r^2
Where:
F is the force between the charges.
k is Coulomb's constant, approximately 8.99 × 10^9 N m^2/C^2.
|q1| and |q2| are the magnitudes of the charges.
r is the distance between the charges.
Let's first calculate the force between q1 and q2. Since q1 and q2 have opposite charges, the force will be attractive:
F12 = k * |q1 * q2| / r12^2
Substituting the given values:
F12 = (8.99 × 10^9 N m^2/C^2) * |3.00 × 10^-6 C| * |-5.00 × 10^-6 C| / (0.0002 m)^2
F12 = -0.67425 N
The negative sign indicates that the force is in the -x direction.
Now, let's consider the force between q1 and q3. The net force on q1 is given as 7.00 N in the -x direction. Therefore, the force between q1 and q3 should be:
F13 = -7.00 N - F12
Substituting the values:
-7.00 N = -7.00 N - (-0.67425 N)
-7.00 N = -7.00 N + 0.67425 N
-7.00 N = -6.32575 N
The force between q1 and q3 is approximately -6.32575 N.
We can calculate the distance between q1 and q3 using the formula for force:
F13 = k * |q1 * q3| / r13^2
Substituting the known values:
-6.32575 N = (8.99 × 10^9 N m^2/C^2) * |3.00 × 10^-6 C| * |-8.00 × 10^-6 C| / r13^2
Simplifying the equation:
r13^2 = (8.99 × 10^9 N m^2/C^2) * |3.00 × 10^-6 C| * |-8.00 × 10^-6 C| / -6.32575 N
r13^2 = 0.4048 m^2
Taking the square root of both sides:
r13 = √0.4048 m^2
r13 ≈ 0.6367 m
The distance between q1 and q3 is approximately 0.6367 m.
Since q3 has a negative charge and the net force on q1 is in the -x direction, q3 must be located to the left of q1. Therefore, the position of q3 is approximately x = -0.6367 m.
The q3q3 is located at approximately x = -0.119 m when the net force on q1q1 is 7.00 N.
To learn more about force, visit
https://brainly.com/question/28572157
#SPJ11