To determine if a basis for R2, we need to check if the two vectors in the basis are linearly independent. Let's call these vectors v1 and v2. If we can find scalars c1 and c2 such that c1v1 + c2v2 = 0 (where 0 is the zero vector), then the two vectors are linearly dependent and not a basis for R2.
However, if the only solution to this equation is c1 = c2 = 0, then the vectors are linearly independent and form a basis for R2.
Let's say the basis for R2 is B = {v1, v2}. To find the coordinates of the vector x relative to this basis, we need to find scalars a1 and a2 such that x = a1v1 + a2v2.
In other words, we need to solve the system of equations:
6 = a1(1) + a2(-1)
-17 = a1(2) + a2(3)
Solving for a1 and a2, we get:
a1 = -5
a2 = -4
Therefore, the coordinates of the vector x relative to the basis B are (-5, -4).
To find the coordinates of the vector x⃗ = [6, -17] relative to the basis B, follow these steps:
Step 1: Identify the basis B.
First, you need to provide the basis B for R2. A basis for R2 consists of two linearly independent vectors, usually denoted as b1 and b2 (e.g., B = {b1, b2}).
Step 2: Set up the equation to express x⃗ in terms of the basis B.
Write x⃗ as a linear combination of the basis vectors b1 and b2:
x⃗ = c1 * b1 + c2 * b2
Step 3: Solve the system of equations for coefficients c1 and c2.
Create a system of linear equations to solve for c1 and c2 using the components of x⃗, b1, and b2.
Step 4: Obtain the coordinates relative to the basis B.
Once you have found the coefficients c1 and c2, the coordinates of x⃗ relative to the basis B will be (c1, c2).
Please provide the basis B to proceed with the calculation.
Learn more about linearly independent.
brainly.com/question/30720942
#SPJ11
Q- 1
Use the graph to answer the question.
Graph of polygon VWXYZ with vertices at 1 comma 2, 1 comma 0, 4 comma negative 7, 7 comma 0, 7 comma 2. A second polygon V prime W prime X prime Y prime Z prime with vertices at 1 comma negative 12, 1 comma negative 10, 4 comma negative 3, 7 comma negative 10, 7 comma negative 12.
Determine the line of reflection.
Reflection across the x-axis
Reflection across x = 4
Reflection across y = −5
Reflection across the y-axis
The y-axis is the line of reflection that converts polygon VWXYZ to polygon V'W'X'Y'Z'.
What is polygon?A polygon is a two-dimensional geometric object that is created by connecting a series of points, known as vertices, with straight lines.
The y-axis is the line of reflection.
By comparing the locations of the vertices in the two polygons, we can see this.
While all of the vertices of polygon VWXYZ are situated in the upper half of the coordinate plane, all of those of polygon V'W'X'Y'Z' are situated in the bottom.
Each vertex in the polygon VWXYZ will be reflected to a corresponding point on the other side of the y-axis while retaining the same distance from the y-axis when we reflect the polygon across the y-axis.
As a result, a new polygon that is similar to the original polygon but has the opposite orientation will be created.
Similar to this, each vertex of the polygon V'W'X'Y'Z' will be mirrored across the y-axis to a corresponding point on the opposite side of the y-axis while retaining the same distance from the y-axis.
As a result, a new polygon that is similar to the original polygon but has the opposite orientation will be created.
Consequently, the y-axis is the line of reflection that converts polygon VWXYZ to polygon V'W'X'Y'Z'.
To know more about polygons, visit:
brainly.com/question/24464711
#SPJ1
Answer:
The y-axis is the line of reflection that converts polygon VWXYZ to polygon V'W'X'Y'Z'.
Step-by-step explanation:
Please help, worth points
Answer:
The answer is in the picture.
suppose the function xn 1 = (axn c) mod m is used to generate pseudo random number. assume : m=10,a=6,c=3, x0 = 3 , what is x1, x2 and x3 ?
The first three pseudo random numbers generated using the given values are x1 = 8, x2 = 1, and x3 = 9.
How to generate pseudo random number?Using the formula xn+1 = (a*xn + c) mod m, we can generate the first few pseudo random numbers as follows:
We are given:
m = 10, a = 6, c = 3, and x0 = 3
x1 = (6x0 + 3) mod 10
= (63 + 3) mod 10
= (18) mod 10
= 8
So, x1 = 8
Now, to find x2, we use x1 as the input:
x2 = (6x1 + 3) mod 10
= (68 + 3) mod 10
= (51) mod 10
= 1
So, x2 = 1
Finally, to find x3, we use x2 as the input:
x3 = (6x2 + 3) mod 10
= (61 + 3) mod 10
= (9) mod 10
= 9
So, x3 = 9
Therefore, the first three pseudo random numbers generated using the given values are x1 = 8, x2 = 1, and x3 = 9.
Learn more about pseudo random numbers
brainly.com/question/14547186
#SPJ11
Tony's house is 3.2 km from the city hall. How far is the distance of tony's house from the city hall in fraction form ?
. By using elimination method, Solve for x and y:
2x + 3y = 2.... (1)
x-2y=8.... (ii)
Answer:
for the first 1 x=1 y=0
for the 2nd one x=8 y=-4
correct me if I'm wrong
the solution is x = 4 and y = -2. To solve using elimination method,
we want to eliminate one of the variables (either x or y) by multiplying one or both equations by a suitable number such that the coefficients of the variable become the same in both equations.
Then we can subtract or add the equations to eliminate that variable.
Let's begin by eliminating x:
Multiplying equation (ii) by 2, we get:
2(x - 2y) = 2(8)
2x - 4y = 16
Now we have two equations:
2x + 3y = 2
2x - 4y = 16
Subtracting the second equation from the first, we get:
(2x + 3y) - (2x - 4y) = 2 - 16
7y = -14
Dividing both sides by 7, we get:
y = -2
Now we can substitute y = -2 into either equation (1) or (2) to solve for x. Let's use equation (2):
x - 2(-2) = 8
x + 4 = 8
x = 4
Therefore, the solution is x = 4 and y = -2.
To know more about elimination method, visit: brainly.com/question/30287548
Find the area under the standard normal curve between z = -1.50 and z = 2.50.
A. 0.7182 B. 0.6312 C. 0.9831 D. 0.9270
The area under the standard normal curve between z = -1.50 and z = 2.50 can be found by using a standard normal distribution table or a calculator.
Using a calculator, we can use the normalcdf function with the given values:
normalcdf(-1.50, 2.50) = 0.9332 - 0.0668 = 0.8664
Therefore, the answer is not one of the options given. However, if we round to four decimal places, the closest option is D. 0.9270.
To find the area under the standard normal curve between z = -1.50 and z = 2.50, you need to calculate the difference between the cumulative probabilities of these two z-scores. You can use a standard normal distribution table (also known as a Z-table) to find the probabilities.
For z = -1.50, the cumulative probability is 0.0668.
For z = 2.50, the cumulative probability is 0.9938.
Now, subtract the probabilities: 0.9938 - 0.0668 = 0.9270.
So, the area under the standard normal curve between z = -1.50 and z = 2.50 is 0.9270, which corresponds to option D.
Visit here to learn more about function : https://brainly.com/question/12431044
#SPJ11
Find x. Assume that any segment that appears to be tangent is tangent.
Geometry, Section 10.6
Hi, I think I know how to find x, I just can't figure out how to find the little arc with the given information. (#16)
Thank you :)
Based on the angle of intersecting secants theorem, the value of x in the circle shown in the image given is calculated as: x = 10 degrees.
How to Apply the Angle of Intersecting Secants Theorem?In order to find the value of x in the circle given, we will apply the angle of intersecting secants theorem as explained below.
Measure of larger intercepted arc = 20 degrees
Measure of smaller intercepted arc = 180 - 20 - 150 = 10 degrees.
Therefore, applying the angle of intersecting secants theorem, we have the equation:
x = 1/2(20 - 10)
x = 1/2 * 10
x = 5 degrees.
Learn more about the angle of intersecting secants theorem on:
https://brainly.com/question/31033097
#SPJ1
A right-angled triangle and two equations are shown below. All lengths are given
in metres.
a) Which equation is correct: equation A or equation B?
b) Use the correct equation from part a) to calculate the length u.
Give your answer in metres to 1 d.p.
Answer:
B.
[tex] \sin64 = ( \frac{u}{5.8} ) [/tex]
Step-by-step explanation:
Because (sin) is equal to opposite divided the hypotenuse so
[tex] \sin64 = ( \frac{u}{5.8} ) [/tex]
And to get (u) we will multiply 5.8 with sin(64)
If you like my answer please give it five starsAnswer Immeditely Please
Answer:
We have a 30°-60°-90° right triangle, so the length of the longer leg is √3 times the length of the shorter leg.
x = 4√3
PLEASE HELPPPPPPPPPP
Answer:
here you go
if you still have any doubt you can reply
given statement: everyone in the class will fail the course only if none of them pass the exam.
key of predicate symbols and individual constants: s=is in the class
c=passes the course
e=fails the exam
Which expression is the best translation of the given statement above into predicate logic?
a. (y) (Sy.Cy) v (y) (Sy > Ey)
b. (y) (Sy.Cy) v (ay)(Sy > Ey)
c. (3)(Sy. Cy) v (y)(Sy > Ey)
d. (ay) (Sy .Cy) v (y) (Sy > Ey)
The best translation of the given statement into predicate logic is option (d): (ay) (Sy .Cy) v (y) (Sy > Ey).
The given statement "everyone in the class will fail the course only if none of them pass the exam" can be translated into predicate logic as follows: For all individuals y, if y is in the class, then either y passes the course or there exists some individual who does not pass the exam.
This can be represented as (ay) (Sy .Cy) v (y) (Sy > Ey), where the universal quantifier is used to express that the statement holds for all individuals, and the logical connectives are used to express the relationships between the predicates. Option (d) is the only one that correctly represents this logical relationship between the predicates.
To learn more about predicate logic, here
https://brainly.com/question/9515753
#SPJ4
Interpret the estimated coefficient for the total loans and leases to total assets ratio in terms of the odds of being financially weak. That is, holding total expenses/assets ratio constant then a one unit increase in total loans and leases-to-assets is associated with an increase in the odds of being financially weak by a factor of -14.18755183 +79.963941181 TotExp/Assets + 9.1732146 TotLns&Lses/AssetsInterpret the estimated coefficient for the total loans and leases to total assets ratio in terms of the probability of being financially weak. That is, holding total expenses/assets ratio constant thena one unit increase in total loans and leases-to-assets is associated with an increase in the probability of being financially weak by a factor of _____
In this case, a one-unit increase in the total loans and leases to total assets ratio is associated with an increase in the probability of being financially weak by a factor of 9.1732146.
Based on the provided information, a one unit increase in the total loans and leases-to-assets ratio is associated with an increase in the odds of being financially weak by a factor of -14.18755183 +79.963941181 TotExp/Assets + 9.1732146 TotLns&Lses/Assets. However, in terms of the probability of being financially weak, the exact factor cannot be determined without knowing the baseline probability. Without this information, it is not possible to provide an accurate interpretation of the estimated coefficient for the total loans and leases to total assets ratio in terms of the probability of being financially weak.
To interpret the estimated coefficient for the total loans and leases to total assets ratio in terms of the probability of being financially weak, we need to focus on the relevant term in the equation you provided.
The term we are interested in is: 9.1732146 TotLns&Lses/Assets
This coefficient (9.1732146) represents the change in the odds of being financially weak when the total loans and leases to total assets ratio increases by one unit, while holding the total expenses/assets ratio constant.
In this case, a one-unit increase in the total loans and leases to total assets ratio is associated with an increase in the probability of being financially weak by a factor of 9.1732146.
to learn more about ratios click here:
https://brainly.com/question/8482466
#SPJ11
suppose that y is normally distributed with parameters μ and σ. you observe y and then build a rectangle with length |y | and width 3|y |. let a be the area of the resulting rectangle. find e(a).
If y is normally distributed with parameters μ and σ and you observe y and then build a rectangle with length |y | and width 3|y |, then e(a) = 3(σ[tex]^2[/tex] + μ[tex]^2[/tex])
To find E(A), the expected value of the area A of the rectangle, we need to consider the distribution of Y and the dimensions of the rectangle.
Given that Y is normally distributed with parameters μ (mean) and σ (standard deviation), we know that the length of the rectangle is |Y| and the width is 3|Y|. Therefore, the area A of the rectangle can be expressed as:
A = |Y| * 3|Y|
Now, let's find the expected value of A, E(A):
E(A) = E(|Y| * 3|Y|)
Since 3 is a constant, we can take it out of the expectation:
E(A) = 3 * [tex]E(|Y|^2)[/tex]
We need to find the expected value of [tex]|Y|^2[/tex]. Notice that [tex]|Y|^2[/tex] = [tex]Y^2[/tex], as squaring a number removes its sign. So, we need to find [tex]E(Y^2)[/tex].
For a normal distribution with parameters μ and σ, we know that:
[tex]E(Y^2)[/tex] = Var(Y) + [tex](E(Y))^2[/tex]
Here, Var(Y) represents the variance of Y, which is σ[tex]^2[/tex], and E(Y) represents the expected value of Y, which is μ. Therefore:
[tex]E(Y^2)[/tex] = σ[tex]^2[/tex]+ μ[tex]^2[/tex]
Now, we can substitute this value back into our expression for E(A):
E(A) = 3 * [tex]E(Y^2)[/tex] = 3 * (σ[tex]^2[/tex] + μ[tex]^2[/tex])
So, the expected value of the area A of the resulting rectangle is:
E(A) = 3(σ[tex]^2[/tex] + μ[tex]^2[/tex])
To learn more about standard deviation, refer:-
https://brainly.com/question/23907081
#SPJ11
what is the dispersion (θv−θr)(θv−θr) of the outgoing beam if the prism's index of refraction is nvnvn_v = 1.505 for violet light and nrnrn_r = 1.415 for red light?
The dispersion (θv−θr)(θv−θr) of the outgoing beam can be calculated using the formula:
(θv−θr) = (n_v−n_r)A
where A is the apex angle of the prism and (n_v−n_r) is the difference in refractive index between violet and red light.
Substituting the given values, we get:
(θv−θr) = (1.505-1.415)A
(θv−θr) = 0.09A
Therefore, the dispersion of the outgoing beam is 0.09 times the apex angle of the prism.
To find the dispersion (θ_v - θ_r) of the outgoing beam, you'll need to use the prism's index of refraction values: n_v = 1.505 for violet light and n_r = 1.415 for red light. Keep in mind that the angles θ_v and θ_r represent the deviation of violet and red light, respectively.
You can use Snell's Law to find these angles: n_v * sin(θ_i_v) = n_r * sin(θ_i_r), where θ_i_v and θ_i_r are the incident angles for violet and red light, respectively. However, without further information such as the prism angle or incident angles, it's impossible to calculate the exact dispersion value (θ_v - θ_r).
Once you have the required information, you can find θ_v and θ_r, and then calculate the dispersion (θ_v - θ_r) of the outgoing beam.
Visit here to learn more about Snell's Law brainly.com/question/2273464
#SPJ11
14 Find the value of x for each diagram below.
a.)
b.)
According to the given angle,
a) The value of x is any real number.
b) The value of x is 20.25 degrees.
a.) In the first diagram, we have two parallel lines cut by a transversal, which creates two pairs of corresponding angles. Corresponding angles are angles that occupy the same relative position at each intersection where the two lines are cut by the transversal. In this case, we have two corresponding angles that are equal to each other.
Therefore, we can set up an equation:
x + 96 = x + 96
Solving for x, we can simplify the equation:
x = x
This means that x can be any value, as long as it is a real number.
b.) In the second diagram, we have two angles that are not necessarily related to each other by any geometric properties. We are given their measurements in degrees and asked to solve for x.
We can set up an equation using the fact that the sum of the two angles is equal to 180 degrees. Therefore:
x + 21 + 7x - 3 = 180
Simplifying the equation, we get:
8x + 18 = 180
Subtracting 18 from both sides:
8x = 162
Dividing both sides by 8:
x = 20.25
Therefore, x is equal to 20.25 degrees.
To know more about angle here
https://brainly.com/question/4316040
#SPJ1
find the joint pdf of y1 = x1/x2, y2 = x3/(x1 x2), and y3=x1 x2.
We can write the joint probability density function of Y as: fY(y1, y2, y3) = [tex]fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
Let X = (X1, X2, X3) be a vector of independent continuous random variables with joint probability density function fX(x1, x2, x3). We want to find the joint probability density function of Y = (Y1, Y2, Y3) = (X1/X2, X3/(X1X2), X1X2).
To do this, we need to find the Jacobian matrix of the transformation from X to Y. The Jacobian matrix is:
J = |∂y1/∂x1 ∂y1/∂x2 ∂y1/∂x3|
|∂y2/∂x1 ∂y2/∂x2 ∂y2/∂x3|
|∂y3/∂x1 ∂y3/∂x2 ∂y3/∂x3|
where
∂y1/∂x1 = 1/x2, ∂y1/∂x2 = -x1/x2^2, ∂y1/∂x3 = 0
∂y2/∂x1 = -x3/(x1^2x2), ∂y2/∂x2 = -x3/(x1x2^2), ∂y2/∂x3 = 1/(x1x2)
∂y3/∂x1 = x2, ∂y3/∂x2 = x1, ∂y3/∂x3 = 0
So the Jacobian matrix is:
[tex]J = |1/x2 -x1/x2^2 0|[/tex]
[tex]|-x3/(x1^2x2) -x3/(x1x2^2) 1/(x1x2)|[/tex]
|x2 x1 0|
The determinant of J is:
[tex]|J| = x3/(x1^2x2^2)[/tex]
Therefore, the joint probability density function of Y is:
fY(y1, y2, y3) = fX(x1, x2, x3)|J|
where [tex]x1 = y1y3^(1/2)[/tex], [tex]x2 = y1^(-1)y3^(1/2),[/tex] and x3 = y3/y1
Substituting these expressions into the Jacobian and simplifying, we get:
[tex]|J| = y3^{(-3/2)[/tex]
So the joint probability density function of Y is:
[tex]fY(y1, y2, y3) = fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
Therefore, we can write the joint probability density function of Y as:
[tex]fY(y1, y2, y3) = fX(y1y3^(1/2), y1^(-1)y3^(1/2), y3/y1) y3^(-3/2)[/tex]
To learn more about probability density function visit: https://brainly.com/question/30403935
#SPJ11
This chart shows a sequence of causes and effects in how banking can affect society. Complete the chart by selecting the correct word.
First
Second
Third
Fourth
Fifth
Sixth
Seventh
Eighth
The Fed reduces interest rates.
Banks will make (more or fewer?) loans.
The money supply (increases or decreases?).
People and businesses are (more or less) likely to spend and borrow money.
The number of jobs will (decrease or increase?).
People will buy (more or fewer?) cars, homes, and fun stuff.
Growth of the economy speeds up.
Inflation will (decrease or increase?).
The banking industry serves as both a source of credit and a source of money for the populace. The bank will make more loans if the interest rates are lowered.
Why do interest rates exist?
The amount of the loan that is charged to the borrowers as interest on an annual percentage basis is known as the interest rate.
If the Fed lowers interest rates, the bank will make more loans and the amount of money available will rise.
The company's borrowing and spending will increase, creating new job opportunities. More home and car purchases will occur as a result of rising income and employment, among other factors.
As a result, the economy will grow and the rate of inflation will drop.
Learn more about interest rates here:
https://brainly.com/question/13324776
#SPJ1
Construct a frequency distribution of companies based on per unit sales. (Enter the answers in $ millions.)
Per unit sales ($ millions) Frequency
0.0 up to 0.5
0.5 up to 1
1 up to 1.5
1.5 up to 2
2 up to 2.5
2.5 up to 3
3 up to 3.5
3.5 up to 4
The frequency distribution table can be used to analyze the distribution of companies based on their per unit sales, and can help identify trends and patterns in the data.
To construct a frequency distribution of companies based on per unit sales, we need to gather data on the sales figures of each company and then categorize them into intervals of per unit sales.
Here is an example frequency distribution table based on per unit sales ($ millions):
Per unit sales ($ millions) Frequency
0.0 up to 0.5 2
0.5 up to 1 4
1 up to 1.5 6
1.5 up to 2 8
2 up to 2.5 5
2.5 up to 3 3
3 up to 3.5 2
3.5 up to 4 1
In this table, we have eight intervals of per unit sales, ranging from 0.0 up to 4.0 million dollars. For each interval, we count the number of companies that fall within that range, and record the frequency. For example, we have 2 companies with sales figures between 0.0 and 0.5 million dollars, 4 companies with sales figures between 0.5 and 1 million dollars, and so on.
This frequency distribution table can be used to analyze the distribution of companies based on their per unit sales, and can help identify trends and patterns in the data.
To learn more about frequency distribution here:
brainly.com/question/12385304#
#SPJ11
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation .2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab
If pH is a normal variable and there are 25 students in each lab, then the value of P(-0.1 ≤ X' - y' ≤ 0.1) is 0.9232.
Let X represent the pH reading that the morning students determined.
Let Y represent the pH reading that the afternoon students came up with.
μₓ = 5
σₓ = 0.2
Calculation is the goal P(-0.1 ≤ X' - y' ≤ 0.1).
From the information provided number of students n = 25
Consider,
μₓ = E(X')
μₓ = E(ΣXi/n)
μₓ = 1/25 E(X₁ + X₂ + ....... + X₂₅)
μₓ = 1/25 [E(X₁) + E(X₂) + ....... + E(X₂₅)]
μₓ = 1/25 (5 + 5 + ...... + 5)
μₓ = 1/25 × 125
μₓ = 5
Therefore
[tex]\mu_{X'-Y'} = \mu_{X'}-\mu_{Y'}[/tex]
[tex]\mu_{X'-Y'}[/tex] = 5 - 5
[tex]\mu_{X'-Y'}[/tex] = 0
Now consider
σₓ'² = var(X')
σₓ'² = var(ΣXi/n)
σₓ'² = 1/n² [var(X₁) + var(X₂) + ........ + var(X₂₅)]
As all X are independent. So Cov(Xi, Xj) = 0
σₓ'² = 1/(25)²[(0.2)² + (0.2)² + ......... + (0.2)²]
σₓ'² = (25 × (0.2)²)/625
σₓ'² = (25 × 0.04)/625
σₓ'² = 1/625
σₓ'² = 0.0016
Therefore,
[tex]\sigma_{X'-Y'}=\sqrt{var(X')+var(Y')}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0016+0.0016}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0032}[/tex]
[tex]\sigma_{X'-Y'}[/tex] = 0.0566
Now we compute P(-0.1 ≤ X' - y' ≤ 0.1).
P(-0.1 ≤ X' - y' ≤ 0.1) = P[(-0.1 - 0)/0.0566 ≤ Z ≤ (0.1 - 0)/0.0566]
P(-0.1 ≤ X' - y' ≤ 0.1) = P[-1.7668 ≤ Z ≤ 1.7668]
P(-0.1 ≤ X' - y' ≤ 0.1) = P(Z ≤ 1.7668) - P(Z ≤ -1.7668)
Using excel.
P(-0.1 ≤ X' - y' ≤ 0.1) = (= NORMSDIST(1.77)) - (= NORMSDIST(-1.77))
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9616 - 0.0384
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9232
To learn more about normal variable link is here
brainly.com/question/14782203
#SPJ4
The complete question is:
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation 0.2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab. Let X' = the average pH as determined by the afternoon students.
If pH is a normal variable and there are 25 students in each lab, compute P(-0.1 ≤ X' - y' ≤ 0.1).
If pH is a normal variable and there are 25 students in each lab, then the value of P(-0.1 ≤ X' - y' ≤ 0.1) is 0.9232.
Let X represent the pH reading that the morning students determined.
Let Y represent the pH reading that the afternoon students came up with.
μₓ = 5
σₓ = 0.2
Calculation is the goal P(-0.1 ≤ X' - y' ≤ 0.1).
From the information provided number of students n = 25
Consider,
μₓ = E(X')
μₓ = E(ΣXi/n)
μₓ = 1/25 E(X₁ + X₂ + ....... + X₂₅)
μₓ = 1/25 [E(X₁) + E(X₂) + ....... + E(X₂₅)]
μₓ = 1/25 (5 + 5 + ...... + 5)
μₓ = 1/25 × 125
μₓ = 5
Therefore
[tex]\mu_{X'-Y'} = \mu_{X'}-\mu_{Y'}[/tex]
[tex]\mu_{X'-Y'}[/tex] = 5 - 5
[tex]\mu_{X'-Y'}[/tex] = 0
Now consider
σₓ'² = var(X')
σₓ'² = var(ΣXi/n)
σₓ'² = 1/n² [var(X₁) + var(X₂) + ........ + var(X₂₅)]
As all X are independent. So Cov(Xi, Xj) = 0
σₓ'² = 1/(25)²[(0.2)² + (0.2)² + ......... + (0.2)²]
σₓ'² = (25 × (0.2)²)/625
σₓ'² = (25 × 0.04)/625
σₓ'² = 1/625
σₓ'² = 0.0016
Therefore,
[tex]\sigma_{X'-Y'}=\sqrt{var(X')+var(Y')}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0016+0.0016}[/tex]
[tex]\sigma_{X'-Y'}=\sqrt{0.0032}[/tex]
[tex]\sigma_{X'-Y'}[/tex] = 0.0566
Now we compute P(-0.1 ≤ X' - y' ≤ 0.1).
P(-0.1 ≤ X' - y' ≤ 0.1) = P[(-0.1 - 0)/0.0566 ≤ Z ≤ (0.1 - 0)/0.0566]
P(-0.1 ≤ X' - y' ≤ 0.1) = P[-1.7668 ≤ Z ≤ 1.7668]
P(-0.1 ≤ X' - y' ≤ 0.1) = P(Z ≤ 1.7668) - P(Z ≤ -1.7668)
Using excel.
P(-0.1 ≤ X' - y' ≤ 0.1) = (= NORMSDIST(1.77)) - (= NORMSDIST(-1.77))
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9616 - 0.0384
P(-0.1 ≤ X' - y' ≤ 0.1) = 0.9232
To learn more about normal variable link is here
brainly.com/question/14782203
#SPJ4
The complete question is:
Suppose that when the pH of a certain chemical compound is 5.00, the pH measured by a randomly selected beginning chemistry student is a random variable with mean 5.00 and standard deviation 0.2. A large batch of the compound is subdivided and a sample given to each student in a morning lab and each student in an afternoon lab. Let X' = the average pH as determined by the afternoon students.
If pH is a normal variable and there are 25 students in each lab, compute P(-0.1 ≤ X' - y' ≤ 0.1).
determine if the given set is a subspace of P, for an appropriate value of n. Justify your answers 5. All polynomials of the form p(t) = at?, where a E R. 6. All polynomials of the form p(t) = a + t, where a E R. 7. All polynomials of degree at most 3, with integers as, coefficients. 8. All polynomials in P, such that p(0) = 0.
For the given set is a subspace of P, for an appropriate value of n, answers are justified below :
What is set?
In mathematics, a set is a collection of distinct objects, considered as an object in its own right. These objects can be anything, such as numbers, letters, or even other sets.
5. The given set is not a subspace of P because it is not closed under addition. For example, if we take p(t) = 2t² and q(t) = 3t², both are in the given set, but their sum r(t) = p(t) + q(t) = 5t² is not in the given set.
6. The given set is a subspace of P, for any value of n. It is closed under addition and scalar multiplication. If p(t) and q(t) are polynomials of the given form, then their sum p(t) + q(t) is also of the same form, and if a is any real number, then ap(t) is also of the same form.
7. The given set is a subspace of P, for n = 3. It is closed under addition and scalar multiplication, and contains the zero vector (the polynomial p(t) = 0). If p(t) and q(t) are polynomials of degree at most 3 with integer coefficients, then their sum p(t) + q(t) is also a polynomial of degree at most 3 with integer coefficients, and if a is any integer, then ap(t) is also a polynomial of degree at most 3 with integer coefficients.
8. The given set is a subspace of P. It is closed under addition and scalar multiplication, and contains the zero vector (the polynomial p(t) = 0). If p(t) and q(t) are polynomials such that p(0) = 0 and q(0) = 0, then their sum p(t) + q(t) also has p(0) + q(0) = 0, so it is in the given set. Similarly, if a is any scalar and p(t) has p(0) = 0, then ap(t) also has ap(0) = 0, so it is in the given set.
To learn more about set visit:
https://brainly.com/question/13458417
#SPJ1
15 Pts!!!! Please hurry
Find f.
f ''(t) = 8et + 3 sin t, f(0) = 0, f(π) = 0
The solution to the given differential equation is:
f(t) = 8et - 3 sin t - 5t + (5π - 8eπ)
To find f, we need to integrate the given second derivative of f:
f '(t) = ∫(8et + 3 sin t)dt = 8et - 3 cos t + C1
where C1 is the constant of integration. To find C1, we use the initial condition f(0) = 0:
f(0) = 8e0 - 3 cos 0 + C1 = 0
C1 = -5
Therefore, f '(t) = 8et - 3 cos t - 5
To find f, we integrate f '(t):
f(t) = ∫(8et - 3 cos t - 5)dt = 8et - 3 sin t - 5t + C2
where C2 is the constant of integration. To find C2, we use the boundary condition f(π) = 0:
f(π) = 8eπ - 3 sin π - 5π + C2 = 0
C2 = 3 sin π + 5π - 8eπ = 5π - 8eπ
Therefore, the solution to the given differential equation is:
f(t) = 8et - 3 sin t - 5t + (5π - 8eπ)
To learn more about differential equation here:
brainly.com/question/14620493#
#SPJ11
For the alpha observed significance level (p-value)pair, indicate whether the null hypothesis would be rejected. alpha=0.025, p-value=0.001 Choose the correct conclusion below. A. Do not reject the null hypothesis since the p-value is not lees than the value of alpha. B. Reject the null hypothesis since the p-value is not less than the value of alpha. C. Reject the null hypothesis since the p-value is less than the value of alpha. D. Do not reject the null hypothesis since the p-value is less than the value of alpha.
The correct conclusion is C.Reject the null hypothesis.
What does hypothesis means?A hypothesis is an educated guess or proposed explanation for a phenomenon or observation that can be tested through further investigation or experimentation. It is a tentative statement that can be either supported or refuted by evidence.
What is the meaning of conclusion?Conclusion refers to the final part of something, typically a written piece, where the main points or arguments are summarized and a final decision or opinion is presented. It is often used to bring closure to a discussion or to provide a final statement on a topic.
The correct conclusion is C.
In hypothesis testing, the alpha (significance level) is the threshold used to determine whether the null hypothesis should be rejected or not. If the p-value (observed significance level) is less than the alpha, it means that the observed data is unlikely to have occurred by chance alone. In this case, the p-value is 0.001, which is less than the alpha of 0.025, so the correct conclusion is to reject the null hypothesis.
Learn more about hypothesis here:
https://brainly.com/question/11560606
#SPJ1
given list [22, 28, 33, 34, 35, 30, 20, 24, 40], what is the value of i when the first swap executes?
When the first swap executes the value of i is 5 in the given list [22, 28, 33, 34, 35, 30, 20, 24, 40].
To determine the value of i when the first swap executes, we need to know which elements are being swapped. In a bubble sort algorithm, two adjacent elements are compared and swapped if they are in the wrong order.
Starting with the first two elements of the list [22, 28], we see that they are already in order. The algorithm then moves on to compare the next pair of elements, [28, 33]. Again, these are in order. The algorithm continues comparing and swapping until it reaches the pair [30, 20].
Since 20 is less than 30, these two elements need to be swapped. The swap executes by assigning the value of 20 to the variable holding the value of 30, and vice versa. So the list becomes [22, 28, 33, 34, 35, 20, 30, 24, 40]. The index of the first swapped element, which is 20, is 5. Therefore, the value of i when the first swap executes is 5.
To learn more about the list, refer:-
https://brainly.com/question/24462379
#SPJ11
write the summation in expanded form.∑ j (j +1)
The expanded form of the summation ∑ j (j +1) is 2 + 6 + 12 + ... + n(n + 1).
Writing the summation in expanded formFrom the question, we have the following parameters that can be used in our computation:
∑ j (j +1)
Expanding the summation, we get:
= (1)(1 + 1) + (2)(2 + 1) + (3)(3 + 1) + ... + (n)(n + 1)
This gives
= 2 + 6 + 12 + ... + n(n + 1)
Therefore, the expanded form of the summation is 2 + 6 + 12 + ... + n(n + 1).
Read more about summation notation at
https://brainly.com/question/15973233
#SPJ1
F(n) = 2(-3)^n complete the recursive formula of f(n)
Answer:
→f(1) = -6.
→f(n)= f(n−1)(-3).
Step-by-step explanation:
Experts verified answer given in attachment!
if a firm requires $3.20 of assets to generate $1 in sales, it has a capital intensity ratio of
The capital intensity ratio of the firm is 3.20. This means that the firm requires $3.20 of assets to generate $1 in sales.
What is the capital intensity?A business metric known the capital intensity ratio can be used to assess how efficient to a company runs. A low capital intensity ratio indicates that a business is making the majority of its profits from the revenue it derives of its assets.
How do you calculate capital intensity?Comparing capital costs will reveal the capital intensity. High operational leverage and depreciation costs are typical of capital-intensive businesses. All assets divided by sales results in the capital intensity ratio.
The capital intensity ratio measures the amount of capital required to generate a certain level of sales. It is calculated as the ratio of total assets to sales revenue.
In this case, if the firm requires $3.20 of assets to generate $1 in sales, the capital intensity ratio would be:
Capital Intensity Ratio = Total Assets / Sales Revenue
Capital Intensity Ratio = $3.20 / $1
Capital Intensity Ratio = 3.20
Therefore, the capital intensity ratio of the firm is 3.20. This means that the firm requires $3.20 of assets to generate $1 in sales.
Learn more about Capital Intensity here:
https://brainly.com/question/13887805
#SPJ1
Sketch the solid whose volume is given by the iterated integral.101(7 − x − 5y)dx dy0Describe your sketch.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the x y-plane.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the x z-plane.The solid has ---Select--- a triangle a rectangle a trapezoid a straight side and a curved side two straight sides and a curved side two straight sides and two curved sides three straight sides and a curved side in the y z-plane.The highest point of the top of the solid is (x, y, z) =.The lowest point of the top of the solid is (x, y, z) =
The sketch of the solid whose volume is given by the iterated integral is given below.
What is iterated integral?To sketch the solid, we can first look at the limits of integration. The limits of x are from 0 to 1, and the limits of y are from 0 to 1-x. This means that the solid is a right triangular pyramid with base vertices at (0,0), (1,0), and (0,1), and height h given by the function h(x,y) = 101(7-x-5y).
The solid has a straight side along the x-axis and two straight sides along the y-axis, and a curved side for the hypotenuse of the base triangle.
The highest point of the top of the solid occurs at the vertex opposite the base triangle, which is at (x,y,z) = (1/3,1/3,200/3).
The lowest point of the top of the solid occurs at the vertex of the base triangle at (x,y,z) = (0,0,707/3).
Thus, the sketch of the solid is prepared.
Learn more about iterated integral, here:
https://brainly.com/question/31383400
#SPJ1
find without using Mathematical table or calculator log 0.045. (3 marks)
Answer:
log 0.045=1-log 2 -2 - log (small)e 11/10
or
-1.346
Step-by-step explanation:
log0.045=log 9/200
We can use the property of logarithms that states:
log(small)b a/c = log (small)b a - log (small)b c
applying this property, we get:
log 9/200 = log 9 - log 200
simplify:
log 200=log 2+ log 100=log 2+2
substitute this back into the original equation:
log 0.045 = log 9 - log 200 = log 9 - (log 2+2)
Use the fact that log 10=1 to simplify log 9:
log 9=log(10-1)=log 10 +log (1-1/10)=1-log 10 ^-1 + Reiman's sum (from n=1 to infinity) 1/n (1/10)^n
Since log 10=1, we have log 10^-1=-1, so we get:
log 9 = 1+1 - Reiman's sum (from n=1 to infinity) 1/n (1/10)^n
Substituting back into the original equation we get:
log 0.045=(1+1- Reiman's sum (from n=1 to infinity) 1/n (1/10)^n)-(log 2+2)
This is a convergent series that sums to:
log 0.045=1-log 2 -2 - log (small)e 11/10
Simplifying this expression we get:
log 0.045 = -1.346
You would probably give log 0.045=1-log 2 -2 - log (small)e 11/10 if you're not allowed to use a calculator.
question nonnegative and x + y < 30 the region where x and y are Let fx,Y (X;, Y) be constant on Find f(x |y): flx 'ly) = 1/30-5) , 0sx,0syxtys3o fylv) = (30-41/450, 0
The probability density function for f(x|y) is, f(x|y) = 1 / (5(6-ln(30-5y))), for 0 <= x <= 30-y and 0 <= y <= 30.
To find f(x|y), we need to use the formula:
f(x|y) = f(x,y) / f(y)
where f(y) is the marginal distribution of y. We can find f(y) by integrating f(x,y) over x:
f(y) = integral from 0 to 30 of f(x,y) dx
Using the given values of f(x,y), we have:
f(y) = integral from 0 to 30 of 1/(30-5y) dx
This is a simple integral, which we can evaluate as:
f(y) = ln(30-5y) - ln(5)
Now we can use this to find f(x|y):
f(x|y) = f(x,y) / f(y)
Substituting the given values of f(x,y) and f(y), we have:
f(x|y) = (1/(30-5y)) / (ln(30-5y) - ln(5))
Simplifying, we get:
f(x|y) = 1 / (5(6-ln(30-5y)))
Now we need to check that this satisfies the conditions for a probability density function. The integral of f(x|y) over the region R must be equal to 1:
integral over R of f(x|y) dA = 1
where dA represents the area element in the region R.
Substituting the expression for f(x|y) and using the fact that x ranges from 0 to 30-y, we have:
integral from 0 to 30 of integral from 0 to 30-x of f(x|y) dy dx = 1
This is a double integral that can be evaluated using the given values of f(x|y) and f(y). After performing the integrations, we get:
1 = 1
So the condition for a probability density function is satisfied.
To know more about constant, here
brainly.com/question/31481943
#SPJ4