Inside the box is a list of endangered animals in the Philippines. Group the animals in three ways and make a diagram of your groupings in the space below.

Hope you could get an idea from here.

Doubt clarification - use comment section.

(đ) is answer of question.

Explanation:

However, the brightness of a star depends on its composition and how far it is from the planet. Astronomers define star brightness in terms of apparent magnitude — how bright the star appears from Earth — and absolute magnitude — how bright the star appears at a standard distance of 32.6 light-years, or 10 parsecs.

MARK ME AS A BRAINLIST PLZ

Astronomers measures the luminosity of stars by determining the magnitude of brightness and distance from earth.Thus option C is correct.

Luminosity of a star is the total amount of energy radiated by them to a distance. The luminosity vary from star to star based on the distance to them.

Luminosity is basically measured in terms of brightness as observed from the earth. Stars will make a group in certain shapes and certain number called constellation. The overall brightness can be then higher for each constellation.

Astronomers define the brightness of stars by the apparent distance from the earth whereas the absolute magnitude is defined is terms of standard distance of 32.6 light years. Hence, the option C based on distance and brightness is correct.

To find more about luminosity, refer the link:

https://brainly.com/question/14140223

#SPJ5

The energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹J

HOW TO CALCULATE ENERGY OF A PHOTON:

E = hf

Where;

E = energy of photon (J)

h = Planck's constant (6.626 × 10-³⁴J)

f = frequency of photon (Hz)

E = 6.626 × 10-³⁴ × 2.3 × 10¹⁴

E = 15.24 × 10-³⁴+¹⁴

E = 15.24 × 10-²⁰J

E = 1.524 × 10-¹⁹J

Learn more at: https://brainly.com/question/23180082?referrer=searchResults

THE ANSWER IS ON THE PICTURE HOPE IT HELPS

Structure V reacts fastest with trimethylamine in SN2 reaction. Owing to less steric crowding in the transition state and ease of cleavage of the R - I bond

The question is incomplete, the complete question is shown in the image attache to this answer.

SN2 reaction is a type of nucleophilic reaction in which the nucleophile attacks the substrate from the reverse side. This is a synchronous reaction because the leaving group departs as the entering group attacks simultaneously in a hypervalent transition state.

SN2 reaction is favored by structure V owing to less steric crowding in the transition state and the easy of cleavage of the R - I bond. Hence, structure V reacts fastest with trimethylamine in SN2 reaction.

Learn more: https://brainly.com/question/13721588

A non-covalent interactions between  molecules are van der Waal's forces and hydrogen bonds.

Non-covalent interaction is an interaction which does not involve sharing of electrons and in this aspect it differs from covalent bond.It rather involves dispersed variations  of electromagnetic interactions  which are present between the molecules or within the molecule.

The energy released during the formation of these interactions  is of the order of 1-5 kcal .They are classified as electrostatic, pi effects , van der waals forces  and hydrophobic effects.

They are important in maintaining the three dimensional structure of large molecules such as proteins ,nucleic acids ,etc.They are also involved in biological processes . They heavily influence drug design process and design of materials.

Learn more about non-covalent interactions,here:

https://brainly.com/question/10736477

#SPJ2

Answer:

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Explanation:

Answer:

It would take 150 kg to lift the load

Explanation:

When you rub an inflated balloon on your head and it makes your hair stand up, the force that makes the hair stand up is known as static electricity.

When the balloon is rubbed on the head, electrons from the hair atoms move into the balloon, thus making the balloon to be negatively charged and the hair positively charged due to loss of electrons.

Unlike charges attracts. Thus, when you try to pull the balloon away slowly, the positively charged hair and the negatively charged balloon will attract each other and this is usually what makes the hair stand up.

More on static electricity can be found here: https://brainly.com/question/24160155

Answer:

static electricity

Explanation:

this is because there is an imbalance between negative and positive charges

when you keep on rubbing, a negative charge is created which is carried by electrons.

when you pull the balloon away slowly, the opposite charges attract to each other which makes your hair attract to the balloon

Answer:

A catalytic converter

Explanation:

Diesel filters are used to clean fuel not emissions, engine injection puts fuel directly into the engine and a transmission clutch changes the cars transmission.

Answer:

carbon monoxide and nitrogen oxide are needed to be properly maintained

Answer:

What reaction product would result if NaOH was used as a base in this reaction instead of K2CO3? If sodium hydroxide was used as the base of the reaction, then the reaction product formed would be an ethyl alcohol because it would undergo a hydrolysis reaction with addition of iodoethane

        The entire carbonation reaction demonstrates how potassium carbonate (K2CO3) combines with water and carbon dioxide to create potassium bicarbonate (KHCO3) when exposed to combustion flue gases at low temperatures (40 to 80 °C) (Reaction 1)

        In an extremely violent and exothermic reaction, potassium carbonate splits into potassium and carbonate ions when it interacts with water. When the ions interact, potassium oxide and carbonic acid are created.

         K2CO3 come from : Potassium carbonate is a common ingredient in the manufacture of soap and glass. Additionally, it serves as a light drying agent. This substance is used as a buffering agent in numerous wine making procedures. Another usage for potassium carbonate is as a fire extinguisher.

        K2CO3 created : Commercially, potassium carbonate is made by reacting potassium hydroxide with carbon dioxide:

2 KOH + CO2 = K2CO3 + H2.

        K2CO332H2O sesquihydrate crystallizes from the solution ("potash hydrate").

        The anhydrous salt is produced by heating this solid at 200 °C (392 °F).

         It disintegrates into K2O+CO2 around 1200 C. (allreaction)

         By converting carbonate into carbon dioxide and water, potassium carbonate can act as a base by forming potassium hydroxide.

To learn more About K2CO3, Refer:

https://brainly.com/question/277906

#SPJ2

Answer:

that donate H+ ion.

Explanation:

hope this helps :)

Answer:

A.3

Three primary amines

Ba amin chính

Answer:

Physicians and it is ethical because they promise to help

Explanation:

Answer:

Fisica, Astronomia, Biologia

Explanation:

con esta relacion entre ellas se puede explicar y comprender fénomenos de la naturaleza.

Answer:

false

Explanation:

hope this helps you

Answer:

False, if the flask becomes colder it's endothermic. I hope this helps! :)

Answer:

a

Explanation:

i took test

Answer:

c. chlorine, with an outer electron shell filled with 7 of a possible 8 electrons

Explanation:

Hope this helps!

The structure in the option A has 7 electrons in the outer shell of its electronic configuration , is unstable and so is most likely to form bond with another atom.

Electrons are arranged in various shells around the nucleus , this arrangement is called electronic structure or configuration.

Each shell can occupy certain fixed number of electrons.

Beside Option A , all the other configurations show stable structures as the last shell has eight electrons and are stable according to the octet rule.

The structure in the option A has 7 electrons in the shell and so is most likely to form bond with another atom.

To know more about Electronic Configuration

https://brainly.com/question/26084288

#SPJ2

Answer:

iiiiiiddddiiilllooeiuehe

It is appropriate to form double or triple bonds in a Lewis structure when four or six electrons are shared.

A Lewis structure is a representation of a molecule using dots to show the valence electrons in the molecule. This dots are shown around the symbols of the elements.

However, in instances where four or six electrons are shared between bonding atoms, a double or triple bond is used. A double bond means that four electrons are shared. A triple bond means that six electrons are shared.

Learn more: https://brainly.com/question/1527403

The average speed of the horse for the entire motion is 66.67 m/s.

The given parameters;

The average speed of the horse is calculated by dividing the total distance traveled by the horse by the time of motion.

The average speed of the horse is calculated as follows;

[tex]average\ speed = \frac{distance}{time} \\\\average\ speed = \frac{1000 \ m}{15 \ s} = 66.67 \ m/s[/tex]

Thus, the average speed of the horse for the entire motion is 66.67 m/s.

Learn more here: https://brainly.com/question/17289046

Answer:22.4 L methane reacts with 44.8 L of oxygen to give 22.4 L of CO  

2  and 44.8 L of water.

Explanation:

Answer:

D) C2H6

Explanation:

All the other molecules contain double (or triple) bonds except for C2H6.

Answer:

Map scale refers to the relationship (or ratio) between distance on a map and the corresponding distance on the ground.

Explanation:

For example, on a 1:100000 scale map, 1cm on the map equals 1km on the ground.

Answer:

Explanation:

a. NaCl+ AgNO3-----> NaNO3+ AgCl

b. Số mol của NaCl= 0,2*0,5= 0,1 (mol)

------> Số mol của kết tủa AgCl tạo thành= 0,1 mol (dựa vào phương trình hóa học)

-----> Khối lượng của kết tủa AgCl tạo thành= 0,1*143,5=14,35(g)

c. Số mol của AgNO3= số mol của NaCl= 0,1 (mol)

------> Nồng độ mol của dd AgNO3 đã tham gia phản ứng= [tex]\frac{0,1}{0,4}[/tex]=0,25(M)