Answers
In the circuit below, the resistors are connected in the series combination and the battery is parallel to the resistor.
What is circuit?Circuit is defined as a closed circuit or route that connects electrical parts and permits the movement of electrons. The term "circuit" can broadly be used to describe any ongoing path via which electricity, data, or a signal might go.
The current flowing through each resistor when two resistors are linked in series is the same. The two resistors divide the voltage from the battery. More resistors in a series circuit increase total resistance, which reduces current.
Thus, in the circuit below, the resistors are connected in the series combination and the battery is parallel to the resistor.
To learn more about circuit, refer to the link below:
https://brainly.com/question/12608491
#SPJ1
Related Questions
Box A of mass m sits on the floor of an elevator with box B of mass 2 m on top of it, as shown the figure above. The elevator is moving upward and slowing down. F_A is the magnitude of the force exerted on box A by box B, F_B is the magnitude of the force exerted on box B by box A, and F_g is the magnitude of the gravitational force exerted on box {B}. Which of the following ranks the forces in order of increasing magnitude?
Answers
Box A of mass m sits on the floor of an elevator with box B of mass 2 m on top of it, in this case option b) would be correct in order of increasing magnitude.
What is magnitude?
Magnitude is a term used in physics to describe an object's maximal size and direction. Scalar and vector quantities both use magnitude as a common factor. We are aware that scalar quantities are those that have just magnitude by definition. Those quantities with both magnitude and direction are considered vector quantities.
There are different ways in which magnitude can be used. Some of them are:
Magnitude of earthquakeMagnitude of charge on an electronMagnitude of forceMagnitude of displacementMagnitude of gravitational forceAn earthquake's size is measured in terms of its length, breadth, and width. It is calculated based on the earthquake's actual size. A single magnitude is thought to exist for an earthquake. Due to variables including the type of surface material and distance from the epicentre, the magnitude of the shaking brought on by the earthquake varies depending on where it occurs.
Too learn more about magnitude
https://brainly.com/question/17157624
#SP J4
Eli wanders around the park. First he walks north 4 meters to the swings. Then he walks south
2.5 meters to the bench to take a break. If he spends 600 seconds doing these things...
What is the distance traveled?
Answers
Answer: total distance traveled = 6.5 m
Explanation:
Important to note the difference between displacement and distance. Distance is the total length of the path taken: 4 + 2.5 = 6.5 m
Displacement is the distance from the point of origin to the ending point:
4 - 2.5 = 1.5 m
The question asked for the DISTANCE, so the answer is 6.5 m
You measure the mass of your rubber band airplane and find that it is 15 grams (0.015 kg). You also measure the acceleration of the airplane with a motion detector and find that the airplane initially accelerates upward at a rate of 2 m/s 2. Calculate the net force on the airplane and the upward force from the lift.
Answers
Mass= 0.015 kg
Acceleration= 2 m/s^2
So force is equal to 0.015 * 2 = 0.03 N.
b. give a brief description of the following symbols given in the above wavepacket. what properties of the wavepacket does each represent?
Answers
A wave group is another name for a wave packet. The concept of superposition allows for this circumstance. According to, the total of both waves is a solution if any two beams are just a response to wave equation.
What does the term "wave packet" mean?A wave packet is a condensed train of (classical) waves with different wavelengths or momenta that is constrained to a specific area of space.
What causes a wave packet to form?a wave packet is created by the superposition of two waves with marginally differing frequencies: The wave packet gets increasingly spatially confined as that the amplitude of the wave rises. Note that the geometry of the wavepacket remains constant.
To know more about wave packet visit:
https://brainly.com/question/13265499
#SPJ4
A cube with edge length L = 0.29 m and density ρc = 0.89×103 kg/m3 floats in equilibrium in a liquid of density ρl = 1.5×103 kg/m3, with the top of the cube a distance d above the liquid’s surface
A; Write an expression to find d using the image
Answers
It is given that,
Cube Length (L) = 0.29m
Density of Cube (Pc) = 0.89 *103 Kg/m3
Density of Liquid (P1) = 1.5 *103 Kg/m3
Distance (d) =?
We know that,
d = {(P1 - Pc)/P1}*L
d = {(1.5*103–0.89*103)/1.5*103}* 0.29
d = {(1.5 – 0.89)/1.5} * 0.29
d = 0.118m
To learn more about the distance of the cube,
https://brainly.com/question/29738861
#SPJ1
The expression to find distance using the given quantities is:
d = ( ρl - ρc ) L / ρl
How to apply this expression to find distance?In this question, it is given that a cube with length L= 0.29 meter and the density of cube ρc = 0.89×103 kg/m3 and it floats in equilibrium in liquid of density ρl = 1.5×103 kg/m3 with the top of the cube a distance d above the liquid surface. So here is the liquid, and the cube will float on the liquid at a distance d. Thus, the expression in terms of the given quantities to find distance d can be written as-
d = ( ρl - ρc ) L/ρl
We are given that,
Density of cube, ρc = 0.89×103 kg/[tex]m^{3}[/tex]
Density of liquid, ρl = 1.5×103 kg/[tex]m^{3}[/tex]
Edge length of cube, L = 0.29 m
So, on substituting the given values in above expression, we get:
d = [(1.5×103 – 0.89×103) / 1.5×103] × 0.29
d = [(1.5 – 0.89) / 1.5] × 0.29
d = 0.118 m
Know more about density of cube at:
https://brainly.com/question/28618440
#SPJ1
The position , in meters, of an object moving along the -axis is given as a function of time , in seconds, as ()=0.09814−0.1953+0.8552+3.15−7.49 Find the object's acceleration at time =3.41 s.
Answers
With the knowledge of differential calculus, the magnitude of the object's acceleration is 11.4 m/s²
What is Position ?Position is any point of coordinate in space or any region in which an object can be located.
Given that the position , in meters, of an object moving along the x-axis is given as a function of time t, in seconds, as
x(t) = 0.09814[tex]t^{4}[/tex] − 0.1953t³ + 0.8552t² + 3.15t − 7.49
The object's acceleration at time =3.41 s can be found with the knowledge of differential calculus.
The derivative of position = velocity
The derivative of velocity = acceleration
That is,
If x(t) = 0.09814[tex]t^{4}[/tex] − 0.1953t³ + 0.8552t² + 3.15t − 7.49
dx/dt = 0.39256t³ - 0.5859t² + 1.7104t + 3.15 = v
dv/dt = 1.17768t² - 1.1718t + 1.7104
when time t = 3.41 s
Substitute for t
dv/dt = a = 1.17768(3.41)² - 1.1718(3.41) + 1.7104
a = 13.69 - 4.00 + 1.7104
a = 11.4 m/s²
Therefore, the object's acceleration at time = 3.41 s, is 11.4 m/s² approximately.
Learn more about Position here: https://brainly.com/question/28180944
#SPJ1
7.)Summarize Newton’s Third Law.
8.) When gravity pulls your book down onto your desktop with 4 N of force, how strong does your desk push back?
9.) Describe/explain an everyday example
Newton’s 3rd Law in action.
(Please help me I need to study for my Test T-T)
Answers
Newton's third law states that for every action (force) in nature there is an equal and opposite reaction. If object A exerts a force on object B, object B also exerts an equal and opposite force on object A.
8)The force of gravity pulling down and the force of the table (FRICTION) pushing upwards on the book are of equal magnitude and opposite directions. These two forces balance each other.
9)A man walking on the ground, While walking, a person pushes the ground in the backward direction, and the ground in return pushes the person in the forward direction, thus making them walk.
How does Newton's 3rd law explain how a person walks across a floor?
Newton's third law states that every action has an equal and opposite reaction. This is relevant to walking because when you put your foot on the ground, you are applying force to it. In doing this, the ground also actually applies an equal force onto your foot, in the opposite direction, pushing you forward.
What is an example of Newton's 3rd law?
Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies an equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
To know more about Newton's third law:
https://brainly.com/question/62770
#SPJ1
A proton (charge 1.602 * 10-19) moves a distance of d
= 0.59 m from point A to point B in a straight line inside a linear accelerator. The electric field of the accelerator is uniform and has a magnitude of 15 MN/C.
What is the electric force on the proton?
F=
What is the work done on the proton?
W=
What is the potential difference between the points A and B?
Vab=
Answers
A proton (charge 1.602 * 10-19) moves a distance of d= 0.59 m from point A to point B in a straight line inside a linear accelerator. The electric field of the accelerator is uniform and has a magnitude of 15 MN/C.
i.) The expression for the force on proton is,
F=qE
(1.6⋅10−19 )(1.5⋅10 7)
=2.4⋅10 −12 N
Thus, the force on the proton is 2.4⋅10 −12 N.
ii) The expression for the work done by the field is,
W=qEd
(1.6⋅10 −19)(1.5⋅10 7 )(0.5)
=1.2⋅10 −12J
iii) The expression for the potential difference is,
U=Ed
=(1.5⋅10 7) (0.5)
=0.75⋅10 7 V
Electric potential of a system of point charges?
A point charge's electric potential is V=kQ/r. Electric field is a vector while electric potential is a scalar.
What is the electric potential at a point distance?
Electric potential at point P, located at a distance of r=R2 from the center, where R is the radius of an evenly charged shell with a density of surface charges.
To know more about electric potential visit
brainly.com/question/12645463
#SPJ1
A large truck is ahead of you and is turning right onto a street with two lanes in each direction. The truck:
A. May complete its turn in either of the two lanes.
B. May have to swing wide to complete the right turn.
C. Must stay in the right lane at all times while turning.
Answers
We can see a big truck turning right in front of you onto a roadway with two lanes going in either direction. When turning, the truck must always stay in the right lane.
What's mean by direction?Direction is characterized as the course that anything follows, the route that must be taken to reach a particular location, the direction in which something is beginning to take shape, or the direction you are facing. When you make a turn instead of left, that is an illustration of direction.
What is compass direction?Despite taking into account compass error, the direction as shown by the instrument. The true direction referred to an Earthly meridian may vary markedly from the direction represented by a magnetic compass.
To know more about direction visit:
brainly.com/question/13899230
#SPJ4
The force required to stretch a Hooke’s-law spring varies from 0 N to 42.8 N as we stretch the spring by moving one end 14.3 cm from its unstressed position. Find the force constant of the spring. Answer in units of N/m. Find the work done in stretching the spring. Answer in units of J.
Answers
The force constant and the work done in stretching the spring with a force of 42.8 N acting on it is 299.3 N/m and 3.06 J respectively.
How to calculate the force constant of a spring?To calculate the force constant of the spring, we use the formula below.
Formula:
F = ke........ Equation 1Where:
F = Force on the springk = Force constant of the springe = Extension of the springFrom the question,
Given:
F = 42.8 Ne = 14.3 cm = 0.143 mSubstitute these values into equation 1 and solve for k
42.8 = 0.143kk = 42.8/0.143k = 299.3 N/mTo calculate the work done in stretching the spring, we use the form ula below.
Formula:
W = ke²/2W = 299.3×0.143²/2W = 3.06 JHence, the force constant and the work done in stretching the spring is 299.3 N/m and 3.06 J respectively.
Learn morea about Force constant here: https://brainly.com/question/21257107
#SPJ1
There are three general types of spectra: continuous, emission, and absorption. Each is characterized by a different distribution of the wavelengths (i.e., colors) of radiation. Sort the images of the three types of spectra into the appropriate bins.
Each type of spectrum is unique in the way the wavelengths (colors) of light are distributed. The continuous spectrum shows a continuum of all the colors, whereas the emission spectra show only specific lines of emitted color. The absorption spectra show only small black ranges where specific colors have been absorbed away.
Answers
There are three general types of spectra: continuous, emission, and absorption. The image drag are:
Continuous
Image 1 (full spectrum)
Emission
Image 2 (mostly dark)
Image 5 (mostly dark)
Absorption
Image 3 (full with lines)
Image 4 (full with lines)
What is the spectrum above about?The distribution of light's wavelengths (or colors) differs for each type of spectrum. While the emission spectra only display individual lines of emitted color, the continuous spectrum displays a continuum of all hues. Only tiny black ranges where particular colors have been taken away are seen in the absorption spectrum.
From the image attached:
A hot, high-density light source generates a continuous spectrum.A hot, low-density light source generates an emission spectrum.A hot, high-density light source passing through a cold, low-density medium results in an absorption spectrum.Learn more about continuous spectrum from
https://brainly.com/question/28706236
#SPJ1
For many years Colonel John P. Stapp, USAF, held the world's land speed record. On March 19.1954, he rode a rocket-propelled sled that moved down a track at a speed of 632 mi/h . He and the sled were safely brought to rest in 1.40 s (Fig. P2.31). Determine (a) the negative acceleration he experienced and (b) the distance he traveled during this negative acceleration.
Answers
The negative acceleration and distance is 451.42m/s² and 175.55m.
When an object experiences negative acceleration, its velocity changes in a negative direction, which can indicate that it is moving either slower or faster.
As a vector quantity that denotes both magnitude and direction, the term "acceleration" is used in physics to describe a change in an object's velocity.
Positive velocity, which is also a vector, makes something move more slowly than something experiencing negative acceleration. An object that has both negative acceleration and velocity, however, is actually moving faster.
a]. Negative Acceleration = dv/dt
a=632/1.40=451.42m/s²
b]. distance= speed x time
d=632x 5/18=175.55m
To learn more about negative acceleration -
https://brainly.com/question/29714217
#SPJ4
Wax is a nonpolar substance. In which type of substance is it the most soluble?
Answers
Answer: C. A hot non-polar substance
Explanation: I am guessing you have options for this, because I've already had this question at school. So C.
Figure shows an electric dipole. What are the (a) magnitude-axis) direction (relative to
the positive direction of the x axis) of the dipole’s electric field at point P, located at
distance r >> d?
Answers
At point P, which is situated at a distance of r >> d, the electric field of the dipole has a magnitude-axis direction that is 1 / 4 x qd/r³ in relation to the positive direction of the x axis.
What is electric field?The physical field that surrounds electrically charged particles and has the power to either attract or repel other charged particles in the vicinity is known as an electric field. Arrows pointing toward or away from charges can be used to depict the vector quantity known as an electric field.
| E net | = 2 E sinθ = 2[1 / 4λεο x q / (d/2)² + 1³] d/2 / √(d/2)² + r ²
= [1 / 4λεο x qd / [(d/2)² + r²] ³/²
For r >> d [(d/2)² + r²] ³/² ≅ r
So the expression will be reduced to
| E net | = 1 / 4λεο x qd / r³
Thus, at point P, which is situated at a distance of r >> d, the electric field of the dipole has a magnitude-axis direction that is 1 / 4 x qd/r³ in relation to the positive direction of the x axis.
To learn more about electric field, refer to the link below:
https://brainly.com/question/8971780
#SPJ1
Given that : A = 4i+6j+12k and B = 3i+12j-7k.
(a) find the magnitude of A and B
(b) find magnitude of A-B
(c) find the sum of A and B
(d)Find the magnitude of A+B
Answers
(a) The magnitude of A is 14 and magnitude of B is 14.2.
(b) The magnitude of A - B is 19.95.
(c) The sum of A and B is 7i + 18j + 5k
(d) The magnitude of A + B is 19.95.
What is the magnitude of A and B?The magnitude of A and B is calculated as follows;
| A | = √ ( 4² + 6² + 12² )
| A | = 14
| B | = √ ( 3² + 12² + 7² )
| B | = 14.2
The magnitude of A - B is calculated as follows;
A - B = ( 4i + 6j + 12k ) - (3i + 12j - 7k)
A - B = ( i - 6j + 19 k )
|A-B| = √ (1² + 6² + 19²) = 19.95
The sum of A and B is calculated as follows;
A + B = ( 4i + 6j + 12k ) + (3i + 12j - 7k)
A + B = ( 7i 18j + 5k )
The magnitude of A + B is calculated as follows;
|A+B| = √ (7² + 18² + 5²) = 19.95
Learn more about magnitude of vectors here: https://brainly.com/question/3184914
#SPJ1
a 300 g mass hangs vertically from a spring. a spring elongation of 11 cm is recorded. calculate the spring constant k in newtons per meter (n/m). (make sure to use the right si units for the mass and elongation)
Answers
The spring constant (K) is 2.67n/m when 300 g mass hangs vertically from a spring.
What is Spring?A spring is a material that may be bent by an external force before resuming its original shape.
What is the Spring constant?Now, the force required for every unit of spring extension is known as the "Spring constant." Knowing the spring constant makes it simple to calculate the amount of force needed to bend the spring.
Hooke's law states that F = -KX.
Calculations:
Given,
Mass = 300g = 0.3kg
Spring elongation = x = 11cm = 1.1m
Spring constant = k =?
Kx= mg
K = mg/x
K = (0.3 * 9.81) / 1.1m
K = 2.67n/m.
Hence, the spring constant (K) is 2.67n/m when 300 g mass hangs vertically from a spring.
To know more about spring constant, check out:
https://brainly.com/question/23885190
#SPJ4
A car of mass 900kg starting from rest has a constant acceleration of 3.5m/s² . calculate it's momentum after it has travelled a distance of 40m
Answers
The momentum of the car is 15030kgm/s
What is momentum?The momentum of a body is the product of the mass of the body and it's velocity. It is a vector quantity and measured in kgm/s.
Momentum is expressed as :
momentum = mass× velocity
using the relation v² = u²+2as to get the velocity of the car.
v² = 0²+2×3.5× 40
v² = 280
v = √280
v = 16.7m/s
from momentum = mass× velocity
= 900× 16.7
= 15030kgm/s
therefore the momentum of the car is 15030kgm/s
learn more about momentum from
https://brainly.com/question/1042017
#SPJ1
identfy type of reaction
Ca + 2HCl -----> CaCl2 + H2
Answers
Ca + 2HCl -----> CaCl2 + H2 is the single-replacement reactions
What is Single replacement reactions?A single-replacement reaction is defined as a chemical reaction in which one strong element replace the other weak element. This reaction can also be called as Exchange reaction.
The given chemical equation Ca + 2HCl -----> CaCl2 + H2 is an example of single-replacement reactions in which Calcium (Ca) is stronger than Hydrogen (H ) and replaces calcium to form bond with Chloride.
Hence, the correct answer for the reaction Ca + 2HCl -----> CaCl2 + H2 is the "single-replacement reactions".
Learn more about Exchange reaction,
https://brainly.com/question/17434463
#SPJ1
A roller coaster car travels along the track as shown in the image. At which two points does the car have the least amount of potential energy?
Points 1 and 5.
Points 1 and 4.
Points 2 and 4.
Points 2 and 5.
Answers
Points 2 and 5 is the point the car have the least amount of potential energy. Hence option d is correct.
What is potential energy?Potential energy is defined as the energy that an object stores as a result of its position in relation to a zero position. Any object that is raised from rest has energy that can be released at a later time; for this reason, it is referred to as potential energy.
The object has a maximum amount of gravitational potential energy and no kinetic energy at the top of the roller coaster (assumed there is no velocity). The gravitational potential energy of the object decreases and the kinetic energy rises as it starts to descend to the bottom.
Thus, points 2 and 5 is the point the car have the least amount of potential energy. Hence option d is correct.
To learn more about potential energy, refer to the link below:
https://brainly.com/question/24284560
#SPJ1
Figure shows an electric dipole. What are the (a) magnitude-axis) direction (relative to
the positive direction of the x axis) of the dipole’s electric field at point P, located at
distance r >> d?
Answers
The magnitude-axis direction relative to the positive direction of the x axis of the dipole’s electric field at point P, located at distance r >> d is 1 / 4λεο x qd/r³.
What is electric field?Electric field is defined as the physical field that surrounds electrically charged particles and acts as an attractor or repellent on all other charged particles in the field. A vector quantity called an electric field can be represented by arrows pointing in the direction of or away from charges.
| E net | = 2 E sinθ = 2[1 / 4λεο x q / (d/2)² + 1³] d/2 / √(d/2)² + r ²
= [1 / 4λεο x qd / [(d/2)² + r²] ³/²
For r >> d [(d/2)² + r²] ³/² ≅ r
So the expression will be
| E net | = 1 / 4λεο x qd / r³
Thus, the magnitude-axis direction relative to the positive direction of the x axis of the dipole’s electric field at point P, located at distance r >> d is 1 / 4λεο x qd/r³.
To learn more about electric field, refer to the link below:
https://brainly.com/question/8971780
#SPJ1
use dimensional analysis to determine which of the following expressions gives the area of a circle: is it qrr2 or 2ttr? explain.
Answers
The dimensional analysis cannot determine whether the area of a circle is πr2 or 2πr2 because the constant 2 is dimensionless.
Dimensional Analysis :
Dimensional analysis is used to measure objects' dimensions and forms. It aids in our mathematical knowledge of object nature. Along with lengths and angles, it also includes geometrical traits like flatness and straightness. Similarly, only if two physical quantities have the same dimensions can they be equal. Dimensional analysis is the study of the relationship between physical quantities using dimensions and units of measurement. Because it maintains the units' consistency, dimensional analysis is crucial for facilitating accurate mathematical computations.
To learn more about dimensional analysis visit: https://brainly.com/question/13078117
#SPJ4
Two boxes with different masses slide down a ramp from the same initial height. Assuming friction is 0, which statement correctly describes the energy of the boxes when they are halfway down the ramp?
Each box has one-half the kinetic energy it had at the top of the ramp.
Both boxes have the same amount of kinetic energy as each other.
Each box has one-half the potential energy it had at the top of the ramp.
Both boxes have the same amount of potential energy as each other.
Answers
Both boxes have the same amount of kinetic energy as each other (option- b) is correct.
How does the mechanical energy in the system change as a result of friction?If no energy is lost through friction, the system's mechanical energy stays constant. When the speed picks up, the energy would change into kinetic energy. Providing there is no energy loss from friction, the system's mechanical energy increases.
The potential energy of an object falls while its kinetic energy rises. The increase in kinetic energy exactly offsets the decrease in potential energy. The idea of work is another crucial one.
Some kinetic energy is converted into heat energy when friction occurs between two surfaces that are moving over one another.
To know more about kinetic energy visit:
https://brainly.com/question/26472013
#SPJ1
A disk between vertebrae in the spine is subjected to a shearing force of 530 N. Find its shear deformation in meters, taking it to have the shear modulus of 1 109 N/m2. The disk is equivalent to a solid cylinder 0.700 cm high and 3.80 cm in diameter.
Answers
The disk is equivalent to a solid cylinder 0.700 cm high and 3.80 cm in diameter. The shear deformation is .∆x=3.34×10⁻⁶ m.
What is deformation?Deformation refers to the change in size or shape of and object whereas displacements are the absolute change in to the position of a point on the the object. Deflections is the relative changes in external displacements in an object.
The shear deformation is .
Given that,
Shearing force F = 600 nm
Shear modulus S=1×10⁹ n/m²
length = 0.700 cm
diameter = 4.00 cm
We need to find the shear deformation
Using formula of shear modulus
S=Flo/A ∆x
∆x=Flo/(rd²/4)S
∆x=4Flo/(rd²/)S
Put the value into the formula
∆x=4×600×0.700×10²/3.14×1×10⁹×(4.00×10²)
∆x=3.34×10⁻⁶ m
Hence, The shear deformation is .∆x=3.34×10⁻⁶m
To know more about deformation click-
https://brainly.com/question/15824434
#SPJ1
A student is trying to determine the muzzle
velocity (initial) of a bullet that is too fast to
measure directly. The student fires the 0.05kg
bullet into a 4kg block of wood initially at rest.
After the collision, the block, with the bullet
embedded inside moves to the right with a
speed of 1.87m/s right.
before collision:
Pbullet
Pblock
after collision:
Pcombined
kg m/s
kg m/s
kg m/s
How fast was the bullet fired?
m/s
Answers
The muzzle velocity of the bullet is 89.4 m/s.
What is muzzle?Muzzle is the front end of a firearm, where the projectile exits the barrel. It is an important safety feature, which helps to ensure that the firearm is pointed in a safe direction. Muzzles also help to contain the explosive force of the propellant gas, reducing the recoil of the firearm, and helping to protect the shooter from harmful gases and debris. Some firearms have additional features, such as flash suppressors, which help to reduce the muzzle flash created when the firearm is fired, making it easier to aim in low light conditions.
The muzzle velocity of the bullet can be determined by conservation of momentum. Momentum is defined as the mass of an object multiplied by its velocity. Therefore, the momentum of the bullet (Pbullet) before the collision is equal to the combined momentum of the bullet and the block (Pcombined) after the collision. We can calculate the muzzle velocity of the bullet by rearranging the equation as follows:
Pbullet = Pcombined
mv = (m + M)V
v = (m + M)V/m
where m is the mass of the bullet (0.05 kg), M is the mass of the block (4 kg), V is the velocity of the block after the collision (1.87 m/s), and v is the muzzle velocity of the bullet.
Plugging in the values, we get:|
v = (0.05 + 4) * 1.87/0.05 = 89.4 m/s
Therefore, the muzzle velocity of the bullet is 89.4 m/s.
To learn more about muzzle
https://brainly.com/question/29853818
#SPJ1
A cart at the end of a spring undergoes simple harmonic motion of amplitude A = 10 cm and frequency 5.0 Hz. Assume that the cart is at x=−A when t=0.
a) Determine the period of vibration.
b) Write an expression for the cart's position as a function of time.
c) Determine the position of the cart at 0.050 s .
d) Determine the position of the cart at 0.100 s .
Answers
A cart at the end of a spring undergoes simple harmonic motion of amplitude A = 10 cm and frequency 5.0 Hz. Assume that the cart is at x = −A when t = 0.
(a) T = 0.2 sec
(b) x(t) = − (10 cm)cos(10π) s⁻¹ t
(c) x(0.050) = 0
(d) x(0.100) = 10 cm
What is Simple harmonic motion?Simple harmonic motion is described as the periodic movement of a point down a straight line with an acceleration that is always toward a fixed point on that line and is proportional to that point's distance from the moving point.
Given that,
frequency (f) = 5.0 Hz
Amplitude (A) = 10 cm
(a) As we know,
T = 1/f
or, T = 1/5 Hz
or, T = 0.2 sec
(b) Because the expression for the cart position is at x= −A when t=0 , this means that the function which describes the position of the cart is a cosine function because, cos(0)=1.
Notice that the form of the equation that describes the position of a vibrating object is as follows :
x(t) = A cos (2Π/T) × t
Substitute for the values of T=0.2s ; A=10 cm and because x = −A when t = 0,then the function will have a negative sign
x(t) = −(10 cm)cos(10π) s⁻¹ t
(c) the position of the cart at 0.050 s:
x(0.050) = −(10 cm)cos(10π) s⁻¹ × (0.050)
x(0.050) = −(10 cm) (cos π/2)
x(0.050) = 0
(d) the position of the cart at 0.100 s:
x(0.100) = −(10 cm)cos(10π) s⁻¹ × (0.100)
x(0.100) = −(10 cm) (cos π)
x(0.100) = 10 cm
To know more about simple harmonic motion refer to:
https://brainly.com/question/20885248
#SPJ1
A light ray strikes the surface of crown glass (n = 1.520), at a 25° angle with respect to the normal from air(n = 1.000293), and leaves the glass, returning to the air. Determine the angle at which the light refracts when it leaves the glass.
Answers
16.14° is the angle of refraction of the light when it leaves the glass.
What is angle of refraction?Snell's law states that the angle of refraction, θr, is proportional to the angle of incidence, θi and the ratio of the refractive indices of the two media that comprise the interface. The angle θr=θi and no refraction occur when the mediums have equal refractive indices.
Given that,
The glass has an index of refraction (n₁) = 1.52
Air has an index of refraction (n₂) = 1.000293.
According to Snell's law:
n₂/n₁ = sin θ₁ / sin θ₂
or, 1.000293 / 1.52 = sin θ₁ / sin (25°)
or, 0.6581 = sin θ₁ / 0.42262
or, 0.2781 = sin θ₁
or, θ₁ = sin⁻¹ (0.2781)
or, θ₁ = 16.15°
So, 16.15° is the angle of refraction of the light when it leaves the glass.
To know more about angle of refraction refer to:
brainly.com/question/12469161
#SPJ1
An Atwood’s machine is set up by suspending two blocks connected by a string of negligible mass over a pulley, as shown above. The blocks are initially held at rest and then released. The acceleration of mass M1 is 4.9 m/s2 downward and M1 = 6 kg. Find the mass of M2.
Answers
The mass of M₂ = 12kg.
What is acceleration of mass?Newton's second law of motion states that an object's acceleration is equal to its mass divided by the net force acting on it, or a = F m. When an object's mass and the net force acting on it are known, this equation for acceleration can be used to determine the object's acceleration.
The formal formulation of Newton's second law is as follows: The acceleration of an object caused by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
F = ma
F = 6×4.9
F = 29.4N.
F = (M₂ - M₁)a
29.4 = (M₂- 6) 4.9
29.4/ 4.9 = M₂- 6
M₂ = 6+6
M₂ = 12kg.
To know more about acceleration visit:
https://brainly.com/question/15007241
#SPJ1
Peter and Nancy leave their office in Sacramento at the same time. Peter drives north on I-5 at a speed of 72 miles per hour. Nancy drives south on I-5 at a speed of 76 miles per hour. How long will it take them to be 330 miles apart?
Answers
2.2 hours long will it take them to be 330 miles apart.
They are separating at (72+76) = 148 miles per hour relative to each other, so they will take (330miles/148miles per hour)
[tex]330/148=2.2[/tex]
What are the distance problems?
Distance problems are word problems that involve the distance an object will travel at a certain average rate for a given period of time. Things to watch out for: Make sure that you change the units when necessary.
How do you solve distance-time problems?
To work out speed, divide the distance of the journey by the time it took to travel, so speed = distance divided by time. To calculate time, divide the distance by speed. To get the distance, multiply the speed by time. You may see these equations simplified as s=d/t, where s is speed, d is distance, and t is time.
Thus, it takes 2.2 hours for them to be 330 miles apart.
To know more about distance time problems:
https://brainly.com/question/29109544
#SPJ1
Physics question, vectors
Answers
The typical canoeist can paddle at about 2.6 knots, or 3 mph (ca. 5 km/h), when paddling without stopping and in calm, quiet water. Obviously, the length of time depends on the weather, the person's health, and the speed of the canoe.
What speed of canoe with respect to water and shore?The typical canoeist can paddle at about 2.6 knots, or 3 mph (ca. 5 km/h), when paddling without stopping and in calm, quiet water. Obviously, the length of time depends on the weather, the person's health, and the speed of the canoe.
Therefore, When the medium is deepest, water waves propagate more quickly. Water waves will therefore slow down as they go from deep to shallow water.
Learn more about canoe here:
https://brainly.com/question/20769684
#SPJ1
relationship between the amplitude, velocity, acceleration and kinetic energy for the simple harmonic oscillator)
Answers
Because the mass is moving at a constant speed, its kinetic energy equals equal to zero. square of a amplitude and therefore is equal to the block's energy.
What is a acceleration explain?Acceleration is the rate at which an moving object's speed and direction change over time. Travel on a circle increases irrespective of whether the speed stays the same since its orientation is always changing.
What are the 3 types of acceleration?The three main types of accelerated motions are regular acceleration, non-uniform acceleration, or average acceleration. The motion in which an item moves inside a straight line while increasing in velocity at regular intervals is referred to as uniform acceleration.
To know more acceleration visit:
brainly.com/question/14355428
#SPJ4