In the case of regression with interactions, the coefficient of a binary variable should be interpreted as follows:
A)there are really problems in interpreting these, since the ln(0)is not defined.
B)for the case of interacted regressors, the binary variable coefficient represents the various intercepts for the case when the binary variable equals one.
C)first set all explanatory variables to one, with the exception of the binary variables. Then allow for each of the binary variables to take on the value of one sequentially. The resulting predicted value indicates the effect of the binary variable.
D)first compute the expected values of Y for each possible case described by the set of binary variables. Next compare these expected values. Each coefficient can then be expressed either as an expected value or as the difference between two or more expected values.

Answers

Answer 1

Option D is correct The coefficient of a binary variable should be interpreted in regression with interactions. The difference between two or more expected values or an expected value can then be used to express each coefficient.

Binary predictors may be used in linear regression?

If a binary feature is of the (0,1) type, the linear regression model can use it right away. If by "Binary feature" you imply, for instance, having two levels ("yes" and "no"), you can map ("yes" and "no") to (0,1) or create a fake variable. Simple linear regression is expanded upon by logistic regression.

We cannot apply simple linear regression when the dependent variable has a dichotomous or binary nature. When the dependent variable is binary (e.g., sex, response, score, etc.), logistic regression is the statistical method used to forecast the relationship between the predictors (our independent variables) and the predicted variable (the dependent variable). A logistic regression requires at least two independent variables, often known as predictors. The IVs, or predictors, might be categorical (ordinal/nominal) or continuous (interval/ratio). The predictive power of each predictor variable is tested in a single block while accounting for the influence of other predictors in the model.

Learn more  about Binary variable from here;

https://brainly.com/question/15847300

#SPJ4


Related Questions

The following items appear on the balance sheet of a company with a one-year operating cycle. Identify the proper classification of each item as follows: C if it is a current liability, L if it is a long-term liability, or N if it is not a liability. prepaid insurance bonds payable

Item Classification
1. Current portion of long-term debt.
2. Notes payable (due in 6 to 11 months).
3. Sales taxes payable.
4. Bonus payable (to be paid in 60 days)
5. Warranty liability (6 months of coverage)
6. Prepaid Insurance (6 months of coverage)
7. Notes payable (due in 120 days).
8. Salaries payable.
9. Pension liability (to be fully paid to retired employees in next 11 months)
10. Bonds payable (due in 2 years)

Answers

Answer:

L Lcnncnln

I think so buh I’d advice u to make it its correct

During 2022, Crane Company entered into the following transactions.
1. Purchased equipment for $310,720 cash.
2. Issued common stock to investors for $138,050 cash.
3. Purchased inventory of $68,620 on account.
Using the following tabular analysis, show the effect of each transaction on the accounting equation. Put explanations for changes to Stockholders' Equity in the right-hand margin.
Assets = Liabilities + Stockholders' Equity
Cash + Inventory + Equipment = Accounts Payable + Common Stock + Retained
Earnings
(1)
(2)
(3)

Answers

Answer:

Assets = Liabilities + Stockholders' Equity = $206,670

Explanation:

Note: See the attached excel file for the analysis of the tabular analysis of the effect of each transaction on the accounting equation.

From the attached excel file, we have:

Assets = = – $172,670 + 68,620 + $310,720 = $206,670

Liabilities = $68,620

Stockholders' Equity =  $138,050

Liabilities + Stockholders' Equity = $68,620 + $138,050 = $206,670

Therefore, we have:

Assets = Liabilities + Stockholders' Equity = $206,670

Project manager Claire and her team need to minimize project risks. Help them match the step to minimize risk to what each step Involves.

Answers

Answer:

Determine which risks goes with prioritizing

Take into consideration goes with identifying

Relate to contingency goes with mitigating

and

Determine the likelihood goes with evaluating

Explanation:

I did the test and got it correct! Hope this helps :) For Edmentum/Plato

Answer:

Determine which risks >>> prioritizing risks

Take into consideration >>> identifying risks

Relate to contingency >>> mitigating risks

Determine the likelihood >>> evaluating risks

Explanation:

Correct on plato

For 2021, Rahal's Auto Parts estimates bad debt expense at 1% of credit sales. The company reported accounts receivable and an allowance for uncollectible accounts of $91,000 and $3,000, respectively, at December 31, 2020. During 2021, Rahal's credit sales and collections were $413,000 and $417,000, respectively, and $3,690 in accounts receivable were written off. Rahal's final balance in its allowance for uncollectible accounts at December 31, 2021, is:

Answers

Answer:

See below

Explanation:

Rahal's final balance in its allowance for uncollectible accounts at December 31, 2021 would be calculated as;

Step 1

= $413,000 × 1%

= $413,000 × 0.01

= $4,130

Step 2

= $3,000 - $3,690

= ($690)

Step 3

= $4,130 + ($690)

= $4,130 - $690

= $3,440

Therefore, Rahal's final balance in its allowance for uncollectible accounts at December 31, 2020 is $3,440

Blossom Company has the following inventory data: July 1 Beginning inventory 35 units at $22 $770 7 Purchases 124 units at $24 2976 22 Purchases 18 units at $26 468 $4214 A physical count of merchandise inventory on July 30 reveals that there are 57 units on hand. Using the LIFO inventory method, the amount allocated to ending inventory for July is

Answers

Answer:

Ending invenory= $1,298

Explanation:

Giving the following information:

July 1 Beginning inventory 35 units at $22 $770

July 7 Purchases 124 units at $24 $2,976

July 22 Purchases 18 units at $26 $468

A physical count of merchandise inventory on July 30 reveals that there are 57 units on hand.

To calculate the ending inventory using the LIFO (last-in, first-out) method, we need to use the cost of the firsts units incorporated into inventory:

Ending inventory= 35*22 + 22*24

Ending invenory= $1,298

Tharaldson Corporation makes a product with the following standard costs: Standard Quantity or Hours Standard Price or Rate Standard Cost Per Unit Direct materials 7.5 ounces $ 8.00 per ounce $ 60.00 Direct labor 0.9 hours $ 19.00 per hour $ 17.10 Variable overhead 0.9 hours $ 8.00 per hour $ 7.20 The company reported the following results concerning this product in June. Originally budgeted output 2,900 units Actual output 2,500 units Raw materials used in production 19,500 ounces Purchases of raw materials 22,400 ounces Actual direct labor-hours 4,700 hours Actual cost of raw materials purchases $ 41,400 Actual direct labor cost $ 12,900 Actual variable overhead cost $ 3,450 The company applies variable overhead on the basis of direct labor-hours. The direct materials purchases variance is computed when the materials are purchased. The materials quantity variance for June is: Multiple Choice $1,386 U $6,000 U $6,000 F

Answers

Answer:

Direct material quantity variance= $6,000 unfavorable

Explanation:

Giving the following information:

Direct materials 7.5 ounces $ 8.00 per ounce

Actual output 2,500 units

Raw materials used in production 19,500 ounces

To calculate the direct material quantity variance, we need to use the following formula:

Direct material quantity variance= (standard quantity - actual quantity)*standard price

Direct material quantity variance= (7.5*2,500 - 19,500)*8

Direct material quantity variance= $6,000 unfavorable

The following information is for Hulk Gyms' first year of operations. Amounts are in millions of dollars. The enacted tax rate is 25%. Year Future Taxable Amounts Future Amounts 2021 2022 2023 2024 2025 Total Accounting income $ 124 Temporary difference: Prepaid insurance (28 ) $ 7 $ 7 $ 7 $ 7 $ 28 Taxable income $ 96 Required: Prepare a compound journal entry to record the income tax expense for the year 2021.

Answers

Answer:

Explanation:

                                    Year       Future Taxable Amounts        Future Amounts

                                    2021     2022    2023   2024    2025             Total

Accounting income    $124

Temporary difference:

Prepaid insurance         (28 )     $7         $7          $7         $7               $28

Taxable income            $96

Jackson Co. (lessee) entered into a 10-year operating lease on January 1, Year 1. Annual lease payments are $30,000, and payments begin December 31, Year 1. The lessee knows that the rate implicit in the lease is 8%, and its incremental borrowing rate is 7%. The useful life of the asset is 20 years. How should Jackson Co. account for the lease in the income statement

Answers

Answer: B. lease payments are allocated over the full lease term on a straight line basis and reported as lease expense in the income statement

Explanation:

The options given include:

A. Interest expense for the lease liability and amortization expense for the right to use asset must be reported separately in the income statement.

B. lease payments are allocated over the full lease term on a straight line basis and reported as lease expense in the income statement

C. the incremental borrowing rate is used to calculate the annual interest expense on lease liability

D. interest expense for the lease liability is recognized in full on the commencement dates of lease.

Jackson Co. should account for the lease in the income statement as "lease payments are allocated over the full lease term on a straight line basis and reported as lease expense in the income statement".

Based on the information given, the correct option is B.

Save the file in your Marketing 2 folder, and name it with Study, the section number, and your first initial and last name. For example, Jessie Robinson's study questions for Section 1 would be named Study 1 Robinson. Answer the questions for each lesson on the same day that you read the lesson. Save the file before closing it each day. Then turn in your answers to the study questions at the end of the section. Review Lesson 4 of the Course Overview for instructions about turning in your study questions. Section 4 Study Questions (15.0 points) Answer each question fully. Complete sentences are not necessary. Lesson 1 (5.0 points) 1. What is outsourcing

Answers

Answer:

Outsourcing is a cost reduction practice where Company A contracts Company B or another party to carry out services or produce goods that Company A used to produce for itself.

It is done when paying Company B to perform the services, is cheaper than performing it themselves which would enable Company A to cut down on costs.

For example, it costs Company A $5 per customer service call if they do it themselves but it would cost $3 per call if they let Company B handle it. Outsourcing is where they pay Company B that $3 to handle the calls and save $2.

When Jake became one of three final candidates for a managerial position with a large medical supply company, the director of the department scheduled a special meeting with him. There, the two talked about the challenging deadlines and heavy travel required of the position, as well as the great compensation and multiple perks. Jake appreciated that the director took time to conduct a(n) _______. Realistic job preview Performance appraisal Behavioral-description interview Situational interview Unstructured interview

Answers

Answer:

Realistic job preview

Explanation:

A realistic job preview shows a new employee or existing employees the good and bad aspects of a job in practice.

This prepares the staff for challenges that they will face in their roles.

In the given instance the director told Jake about challenging deadlines and heavy travel required of the position, as well as the great compensation and multiple perks.

This is a realistic job preview

You are given the following information on Parrothead Enterprises:
Debt: 9,300 6.5 percent coupon bonds outstanding, with 22 years to maturity and a quoted price of 104.75. These bonds pay interest semiannually and have a par value of $1,000.
Common stock: 240,000 shares of common stock selling for $64.80 per share. The stock has a beta of.93 and will pay a dividend of $3.00 next year. The dividend is expected to grow by 5.3 percent per year indefinitely.
Preferred stock: 8,300 shares of 4.65 percent preferred stock selling at $94.30 per share. The par value is $100 per share.
Market: 11.7 percent expected return, risk-free rate of 3.75 percent, and a 23 percent tax rate.
Calculate the company's WACC. (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) WACC %

Answers

Answer:

8.19%

Explanation:

Calculation to determine the company's WACC

First step is to calculate the CAPM rate of equity

Using this formula

CAPM rate of equity = Risk free rate + market risk premium * beta

Let plug in the formula

CAPM rate of equity=3.75%+(11.7%-3.75%)*0.93

CAPM rate of equity=11.14%

Second step is to calculate the DDM rate of equity

Using this formula

DDM rate of equity= Expected dividend next year/Price today + Growth rate

Let plug in the formula

DDM rate of equity=3/64.8+5.3%

DDM rate of equity=9.93%

Third step is to calculate the Cost of equity using this formula

Cost of equity = Average of CAPM and DDM

Let plug in the formula

Cost of equity=(11.14%+9.93%)/2

Cost of equity= 10.54%

Fourth Step is to calculate the Cost of debt (after tax)

Cost of debt (after tax) using financial calculator to compute YTM

PV -1047.5

FV 1000

PMT 1000*6.5%/2 32.5

N 22*2 44

Compute I 3.05%

YTM =3.05%*2 6.10%

Tax rate = 23%

Hence,

Rate of debt (after tax) = 6.1%*(1-23%)

Rate of debt (after tax) = 4.70%

Fifth step is to calculate the Rate of preferred stock using this formula

Rate of preferred stock = Annual dividend/Current price

Let plug in the formula

Rate of preferred stock=4.65/94.3

Rate of preferred stock=4.93

Sixth step is to calculate the Weight

Market value

Source

equity 240000*64.8= 15552000

debt 1047.5*9300= 9741750

preferred stock 8300*94.3=782690

Total 26076440

equity 15552000/26076440= 59.64%

debt 9741750/26076440=37.36%

preferred stock 782690/ 26076440=3.00%

Now let calculate compute WACC

WACC= weight * cost

equity 59.64%*10.54%=6.28%

debt 37.36%* 4.70% =1.76%

preferred stock3.00%*4.93%=0.15%

WACC = 8.19%

(6.28%+1.76%+0.15%)

Therefore the company's WACC is 8.19%

Novak Company uses the LCNRV method, on an individual-item basis, in pricing its inventory items. The inventory at December 31, 2020, consists of products D, E, F, G, H, and I. Relevant per unit data for these products appear below. Item D Item E Item F Item G Item H Item I Estimated selling price $151 $139 $120 $113 $139 $113 Cost 95 101 101 101 63 45 Cost to complete 38 38 32 44 38 38 Selling costs 13 23 13 25 13 25 Using the LCNRV rule, determine the proper unit value for balance sheet reporting purposes at December 31, 2020, for each of

Answers

Answer:

i belive it is d

Explanation:

i took test

The following information relates to Hatami Company's defined benefit pension plan during the current reporting year:

Plan assets at fair value, January 1 $640,000,000
Expected return on plan assets 54,000,000
Actual return on plan assets 44,000,000
Contributions to the pension fund (end of year) 94,000,000
Amortization of net loss 0
Pension benefits paid (end of year) 36,000,000
Pension expense 64,000,000

Required:
Determine the balance of pension plan assets at fair value on December 31.

Answers

Answer: $742,000,000

Explanation:

The balance of pension plan assets at fair value on December 31 will be:

Plan Assets at Fair value, January 1 = $640,000,000

Add: Actual return on plan assets = $44,000,000

Add: Contributions to the pension fund (end of year) = $94,000,000

Less: Pension benefits paid (end of year) = $36,000,000

Plan Assets at Fair value, December 31 = $742,000,000

Journalizing Sales Transactions Enter the following transactions in a general journal. Use a 6% sales tax rate. May 1 Sold merchandise on account to J. Adams, $2,000 plus sales tax. Sale No. 488. 4 Sold merchandise on account to B. Clark, $1,800 plus sales tax. Sale No. 489. 8 Sold merchandise on account to A. Duck, $1,500 plus sales tax. Sale No. 490. 11 Sold merchandise on account to E. Hill, $1,950 plus sales tax. Sale No. 491. If an amount box does not require an entry, leave it blank.

Answers

Answer:

See the journal entries below.

Explanation:

The journal entries will look as follows:

Date       Description                                              Debit ($)          (Credit)  

May 1      Accounts receivable - J. Adams               2,120

                 Sales                                                                              2,000

                 Sales tax payable (6% * $2,000)                                     120

              (To record Sale No. 488.)                                                                

May 4      Accounts receivable - B. Clark                1,908

                 Sales                                                                              1,800

                 Sales tax payable (6% * $1,800)                                     108

              (To record Sale No. 489.)                                                                

May 8      Accounts receivable - A. Duck                1,590

                 Sales                                                                              1,500

                 Sales tax payable (6% * $1,500)                                      90

              (To record Sale No. 490.)                                                                

May 11     Accounts receivable - E. Hill                    2,067

                 Sales                                                                              1,950

                 Sales tax payable (6% * $1,950)                                     117

              (To record Sale No. 491.)                                                                

Sybil transfers property with a tax basis of $5,000 and a fair market value of $6,000 to a corporation in exchange for stock with a fair market value of $3,000 and $2,000 cash in a transaction that qualifies as a section 351 transfer. The corporation assumed a liability of $1,000 on the property transferred. What is Sybil's tax basis in the stock received in the exchange?
A) $6,000.
B) $5,000.
C) $4,000.
D) $3,000.

Answers

Answer:

D) $3,000

Explanation:

Calculation to calculate determine Sybil's tax basis in the stock received in the exchange

Tax basis $5,000

Add recognized gain $1,000

($6,000-$5,000)

Less boot received ($2,000)

Less liability ($1,000)

Sybil's tax basis $3,000

Therefore Sybil's tax basis in the stock received in the exchange will be $3,000

Levine Inc., which produces a single product, has prepared the following standard cost sheet for one unit of the product. Direct materials (9 pounds at $1.90 per pound) $17.10 Direct labor (4 hours at $10.00 per hour) $40.00 During the month of April, the company manufactures 160 units and incurs the following actual costs. Direct materials purchased and used (2,100 pounds) $4,410 Direct labor (680 hours) $6,664 Compute the total, price, and quantity variances for materials and labor.

Answers

Answer:

See below

Explanation:

1. Total materials variance

= (Actual quantity - Actual price) - (Standard quantity × Standard price)

= $4,410 - [(160 × 9) × $1.9]

= $4,140 - $2,736

= $1,404 unfavorable

2. Materials price variance

= (Actual quantity × Actual price) - (Actual quantity × Standard price)

= $4,140 - (2,100 × $1.9)

= $4,140 - $3,990

= $150 unfavorable

3. Materials quantity variance

= (Actual quantity × Standard price) - (Standard quantity × Standard price)

= (2,100 × $1.9) - [(160 × 9) × $1.9]

= $3,990 - $2,736

= $1,254 unfavorable

4. Total labor variance

= (Actual hours × Actual rate) - (Standard hours - Standard rate)

= $6,664 - (160 × 4) × $10

= $6,664 - $6,400

= $264 unfavorable

Kayak Company uses a job order costing system and allocates its overhead on the basis of direct labor costs. Kayak Company's production costs for the year were: direct labor, $30,000; direct materials, $50,000; and factory overhead applied $6,000. The predetermined overhead rate was: Multiple Choice 5.0%. 12.0%. 20.0%. 500.0%. 16.7%

Answers

Answer:

Estimated manufacturing overhead rate= 20%

Explanation:

To calculate the predetermined overhead rate, we need to use the following formula:

Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base

6,000= Estimated manufacturing overhead rate*30,000

Estimated manufacturing overhead rate= 6,000 /30,000

Estimated manufacturing overhead rate= $0.2 per direct labor dollar

As a percentage= (0.2/1)*100= 20%

Last month when Holiday Creations, Inc., sold 41,000 units, total sales were $282,000, total variable expenses were $214,320, and fixed expenses were $36,900. Required: 1. What is the company’s contribution margin (CM) ratio? 2. What is the estimated change in the company’s net operating income if it can increase total sales by $1,700? (Do not round intermediate calculations.)

Answers

Answer:

1. Company’s contribution margin (CM) ratio = 24%

2. Estimated change in the company’s net operating income = $408

Explanation:

1. What is the company’s contribution margin (CM) ratio?

Contribution margin (CM) =  Total sales - Total variable expenses = $282,000 - $214,320 = $67,680

Contribution margin (CM) ratio = Contribution margin / Total sales = $67,680 / $282,000 = 0.24, or 24%

2. What is the estimated change in the company’s net operating income if it can increase total sales by $1,700? (Do not round intermediate calculations.)

Estimated change in the company’s net operating income =  Increase total in sales * Contribution margin (CM) ratio = $1.700 * 24% = $408

The estimated unit costs for a company to produce and sell a product at a level of 12,000 units per month are as follows: Cost Item Estimated Unit Cost Direct material $ 32 Direct labor 20 Variable manufacturing overhead 15 Fixed manufacturing overhead 6 Variable selling expenses 3 Fixed selling expenses 4 What are the estimated conversion costs per unit?

Answers

Answer:

$41

Explanation:

Conversion costs = Direct labor + Manufacturing overhead

Manufacturing overhead = Variable manufacturing overhead + Fixed manufacturing overhead

Manufacturing overhead = $15 + $6 = $21

Conversion costs = $20 + $21 = $41

Therefore, estimated conversion costs per unit

= $41

Boss Company reported the following results for the year ended December 31, 2019, its first year of operations: 2019 Income (per books before income taxes) $ 1,500,000 Taxable income 2,500,000 The disparity between book income and taxable income is attributable to a temporary difference which will reverse in 2019. What should Boss record as a net deferred tax asset or liability for the year ended December 31, 2019, assuming that the enacted tax rates in effect are 40% in 2019 and 35% in 2020

Answers

Answer:

$350,000 deferred tax asset.

Explanation:

Calculation to determine What should Boss record as a net deferred tax asset or liability for the year ended December 31, 2019,

Using this formula

December 31, 2019 Net deferred tax asset or liability=Taxable income -2019 Income (per books before income taxes)

Let plug in the formula

December 31, 2019 Net deferred tax asset or liability=(2,500,000 - $ 1,500,000) × 35%

December 31, 2019 Net deferred tax asset or liability= $350,000 deferred tax asset.

Therefore what Boss should record as a net deferred tax asset for the year ended December 31, 2019 is $350,000

The Smoot-Hawley Act, signed into law in 1930, increased U.S. tariffs to an unprecedented level of 53%, causing a sharp decline in U.S. exports. In 1934, however, changes in the U.S. trade policy enabled U.S. manufacturers to resume business with their foreign distributors. Which of the following is the most likely reason for the increase in U.S. exports after these changes?
A. The president received the authority to negotiate bilateral tariff-reduction agreements with foreign governments.
B. The scientific tariff was introduced, which allowed the president to increase tariff levels if foreign production costs were below those of the United States.
C. Congress was given the authority to approve bilateral trade agreements.

Answers

Answer:

A. The president received the authority to negotiate bilateral tariff-reduction agreements with foreign governments.

Explanation:

Since in the given situation it is mentioned that in the year 1934 the change in the trade policy enables the manufactured of U.S to restart their business with the foreign distributors so the reason that would increase the U.S exports would be that the president should received the authority in order to negotiate the agreement with the foreign government with respect to the decrease in the bilaterial tariff

Hence, the option A is corrrect

Effective managers should Question 26 options: convince employees to engage in relationship conflict rather than the other forms of conflict. minimize the relationship conflicts that exist in the organization. remove all forms of conflict from the organization because it saps productivity. increase the amount of conflict among employees.

Answers

Answer: remove all forms of conflict from the organization because it saps productivity.

Explanation:

Effective managers are the managers who ensures that the goals of an organization are achieved as they bring out the best in the employees. They motivate employees and in such case, employees trust them.

Effective managers remove all forms of conflict in an organization. They ensure that the employees in an organization gets along well and there unity among them because this is vital to enhance productivity and improve organizational growth.

A $500,000 bond issue sold at 98. Therefore, the bonds: Multiple Choice Sold at a premium because the stated rate of interest was higher than the yield rate. Sold at a discount because the stated rate of interest was lower than the effective rate. Sold at a discount because the effective interest rate was lower than the face rate. Sold for the $500,000 face amount less $10,000 of accrued interest.

Answers

Answer: Sold at a discount because the stated rate of interest was lower than the effective rate.

Explanation:

The stated rate of interest is the coupon rate. This is the interest rate at which the bond will make periodic payments.

The effective rate is the market rate. This is the rate that will discount the bond to the present.

If the effective rate is higher than the stated rate of interest, the coupon payments will be discounted such that the current price of the bond will be less than par.

The above bond had a par of 100 but was issued at 98. It was issued at a discount which means that the effective rate was higher than the stated rate.

The SML helps determine the risk-aversion level among investors. The higher the level of risk aversion, the ____________ the slope of the SML. Which of the following statements best describes the shape of the SML if investors were not at all risk averse?

a. The SML would have a positive slope, but the slope would be flatter than it would be if investors were risk.
b. The SML would be a horizontal line.
c. The SML would have a positive slope, but the slope would be steeper than it would be if investors were risk averse.
d. The SML would have a negative slope.

Answers

Answer:

a. The SML would have a positive slope, but the slope would be flatter than it would be if investors were at risk.

Explanation:

The SML would have a positive slope, but the slope would be flatter than it would be if investors were risked The SML would be a horizontal line O The SML would have a positive slope, but the slope would be steeper than it would be if investors were risk-averse O The SML would have a negative slope.

A bank has $400 in checkable deposits, $800 in savings deposits, $700 in time deposits, $900 in loans to businesses, $300 in outstanding credit card balances, $500 in government securities, $10 in currency in its vault, and $20 in deposits at the Fed. The bank's deposits that are part of M1 are equal to

Answers

Answer: $400

Explanation:

M1 money supply simply refers to the monies which are liquid like the checkable deposits, traveler's checks, and the coins and currencies that are in circulation.

Therefore, based on the information given in the question, the bank's deposits that are part of M1 will be the $400 in checkable deposit.

Bentwood Corporation uses the FIFO method in its process costing system. Data concerning the first processing department for the most recent month are listed below:
Beginning work-in-process inventory:
Units in beginning work-in-process inventory 1,700
Materials costs $32,300
Conversion costs $18,700
Percent complete with respect to materials 70%
Percent complete with respect to conversion 25%
Units started into production during the month 8,900
Units transferred to the next department during the month 7,700
Materials costs added during the month $154,600
Conversion costs added during the month $253,900
Ending work-in-process inventory:
Units in ending work-in-process inventory 2,900
Percent complete with respect to materials 80%
Percent complete with respect to conversion 35%
The cost per equivalent unit for conversion costs for the first department for the month is closest to:____.
a. $29.33.
b. $29.00.
c. $31.78.
d. $35.51.

Answers

Answer:

$31.28

Explanation:

Calculation to determine what The cost per equivalent unit for conversion costs for the first department for the month is closest to:

First step is to calculate the Total Conversion Cost

Total Conversion Cost=$253,900+$18,700

Total Conversion Cost=$$272,600

Second step is to calculate the Equivalent Units

Equivalent Units =( 7,700 x 100%) + (1,700 + 8,900 - 7,700 ×35%)

Equivalent Units =( 7,700 x 100%) + (2,900 x 35 %)

Equivalent Units =7,700+1,015

Equivalent Units = 8,715 units

Now let calculate the Cost per Equivalent Units using this formula

Cost per Equivalent Unit = Total Cost ÷ Total Equivalent Units

Cost per Equivalent Unit = $272,600 ÷ 8,715 units

Cost per Equivalent Unit = $31.28

Therefore The cost per equivalent unit for conversion costs for the first department for the month is closest to:$31.28

CarCut Corporation has been employing the Fixed-Order Quantity model to manage the inventory of its best selling 3D printer. The current inventory policy places exactly 60 orders each year. The monthly inventory holding cost is $25 per unit and the setup cost is $50 per order. The demand during lead time is constant, and it takes a lead time of 2 days to receive a shipment. Assume CarCut operates 360 days per year. What is the optimal reorder point in units

Answers

Answer: See explanation

Explanation:

The optimal reorder point in units is calculated as the average daily sales unit multiplied by the delivery lead time.

In the question, we're not provided with the annual demand as this is vital in order to know the average daily unit. Therefore, the question is incomplete

The CarCut Corporation's optimal reorder point in units is 208 units.

Data and Calculations:

Number of orders per year = 60 orders

Monthly inventory holding cost = $25 per unit

Setup cost = $50 per order

Number of operating days per year = 360 days

Lead time = 2 days

Number of times for orders per year = 180 (360/2)

Total annual demand = 10,800 (60 x 180)

Optimal reorder point in units = EOQ = square root of (2 x 10,800 x $50)/$25

= 208 units

Learn more: https://brainly.com/question/14214111

Marilee's Electronics uses a periodic inventory system and the average cost retail method to estimate ending inventory and cost of goods sold. The following data is available from the company records for the month of June 2021:
Cost Retail Beginning inventory $ 120,000 $ 146,000 Net purchases 383,000 580,000 Net markups 33,000 Net markdowns 51,000 Net sales 600,000
To the nearest thousand, estimated ending inventory is:_______.

Answers

Answer:

$76,680

Explanation:

With regards to the above

Using the cost method

Goods available for sale:

= Beginning inventory + Purchases

= $120,000 + $383,000

= $503,000

Using retail method

Goods available for sale

= Beginning inventory + Purchases + Net markups - Net markdowns

= $146,000 + $580,000 + $33,000 - $51,000

= $708,000

Now, cost to retail ratio

= $503,000 ÷ $708,000

= 0.71

Estimated ending inventory at retail

= Goods available for sale under retail method - Net sales revenue

= $708,000 - $600,000

= $108,000

Therefore, estimated ending inventory = Estimated ending inventory at retail × Cost to retail ratio

= $108,000 × 0.71

= $76,680

On January 1, 2018, ABC purchased a commercial truck for $48,000 and uses the straight-line depreciation method. The truck has a useful life of eight years and an estimated residual value of $8,000. Assume the truck was totaled in an accident on December 31, 2019. What amount of gain or loss should ABC record on December 31, 2019 (If a loss, put a minus number in front)

Answers

Answer:

$38,000 Loss

Explanation:

Calculation to determine What amount of gain or loss should ABC record on December 31, 2019

First step is to calculate the depreciation per year

Depreciation per year =($48,000 − $8,000)/8 years

Depreciation per year= $5,000

Now let determine calculation the book value After two years,

Book value= [$48,000 − ($5,000 × 2 years)]

Book value=$48,000-$10,000

Book value= $38,000 Loss

Therefore the amount of loss that ABC should record on December 31, 2019 is $38,000

3. What do you think has more risk: buying corporate bonds or buying a second house in hopes that housing prices increase?

Answers

Answer:

buying a second house

Explanation:

bonds have a high chance of providing returns whereas the housing market is very hard to predict

Other Questions
Examine the social, political, and economic impact of the Civil War on the North and the South. Why are databases important to business? How do databases generate sales and-or profits? What databases do you interact with, and how do they benefit you? What is meant by requirements gathering, and why is it important to clearly define the data requirements of a database before creating it? Read the General Business Example on page 7 of the Frost section of the text. This page describes how to categorize data requirements from a form used by a company called Reading Fool. Turn to page 12 of the text, and pick one of the practice exercises: 1, 2, 3, 4, or 5. Present your solution here. List the category first, and then put all of the data items in parentheses after the category. PLEASE HURRY Question 6 of 15Geographers use charts and graphs in order to:OA. collect and store digital information about a location.B. capture detailed images of a location from space.C. organize and represent data for a location.O D. track the location of moving objects on Earth. What is the meaning of a Bayan? what is the partial-fraction expansion of the rational function f(s)=7s2+30s+27s3+9s? What was FDR's quote? They eat chocolates .transfer into remaining 11 tenses sentences What establishes a precedent ? according to the diagram, which shows the earth during the northern hemisphere winter solstice, how many hours of sunlight will the north pole receive on this day? lumeris inc., an automobile manufacturer, has an inflexible work schedule and requires its workers to work nine hours a day and six days a week. its laborers do not have adequate skills to perform their job efficiently. the inflexible work schedule and inadequate labor skills are examples of . Since the recession and inflation had big roles in determining the outcome of the 1980 election, one could say that Carter lost and Reagan won largely because of ____. What are the 3 islands that speak Spanish? if the court allows someone with a first operating under the influence ( oui ) conviction to complete an alcohol education course . what happens to the license suspension ? in the introduction section of a proposal, which of the following would be the best way to persuade the receiver to read the rest of the proposal? group of answer choices a.Mention a remarkable resource available exclusively to you.b.Present a detailed budget that shows a low overall cost.c.Give the background and credentials of everyone who will be working on the project.d.Provide a timetable for all activities. Two horses are crossed. One has a dark brown coat, and the other has a cream coat.The offspring is dappled and has splotches of both dark brown and cream.What type of dominance does this indicate?Co-dominanceIncomplete dominanceComplete dominanceMutation please show how to simplify 3x +7x 28+318x for x =2043 and show how to solve How did the mongols create a time of peace, or pax mongolica, despite their violence? Does lemon juice rust metal? 6. Writer Oshinsky makes the point that the defenders of the Scottsboro Boys weren'twithout their own flaws. What evidence do we have that both Leibowitz and famedAfrican-American writer Langston Hughes were sexist? How can you prevent food storage areas from cross contamination from bacteria and other hazards?