In order to reopen a case, its current status must be:

Answer:

The Y2K38 bug refers to a potential issue that may arise in computer systems due to a limitation in the way some systems store and handle dates. Many systems use a 32-bit signed integer to represent time in seconds since the start of the Unix epoch, which is January 1, 1970, at 00:00:00 UTC. This means that the maximum value that can be represented using a 32-bit signed integer is 2^31 - 1, or 2,147,483,647 seconds, which is equivalent to approximately 68 years. If this value is interpreted as signed, it would result in a "signed integer overflow" issue on January 19, 2038, at 03:14:08 UTC, also known as the "Year 2038 problem" or "Y2K38 bug."

To determine the largest UTC time that can be encoded by software with the Y2K38 bug, we need to subtract 2,147,483,647 seconds from the Unix epoch of January 1, 1970, at 00:00:00 UTC. This would result in a maximum UTC time of December 13, 1901, at 20:45:52 UTC, rounded down to the minute. Any time beyond this point would result in a signed integer overflow issue on systems that are affected by the Y2K38 bug. It's worth noting that many modern systems and software have already transitioned to using 64-bit or higher integer representations for time, avoiding the Y2K38 bug altogether. However, legacy systems or embedded systems may still be susceptible to this issue if not properly addressed.

By default, in most case management systems, only the user who created the case and any administrators or supervisors with access to the case management system have the ability to view a case upon its creation.

However, this can vary depending on the specific system and the access levels granted to different users or user groups. It's important to note that any additional parties or individuals who may need to view the case will need to be granted access by the user or administrator with the appropriate permissions. The content loaded into the case may also have different viewing restrictions depending on the sensitivity of the information.

Upon the creation of a case, the individuals who typically have the ability to view it include:

1. The case creator: The person who initially creates the case has full access to view its content.
2. Assigned team members: Those who have been assigned to work on the case can view it upon its creation.
3. Administrators or supervisors: Individuals with higher permissions, such as administrators or supervisors, can view cases as part of their oversight responsibilities.

Please note that the specific roles and permissions may vary depending on the platform or organization you are referring to.

Learn more about Administrators at: brainly.com/question/29994801

#SPJ11

When the user quits the game, the code prints the final results of correct and wrong guesses.

```
# Open pi.txt in read mode
with open("pi.txt", "r") as f:
   # Read the single line of text
   pi = f.readline().strip()

# Get user name and say "hi"
name = input("What's your name? ")
print(f"Hi {name}!")

# Use length of name for seed variable
seed = len(name)

# Set initial pointer location using .seek()
with open("pi.txt", "r") as f:
   f.seek(seed)
   digit = f.read(1)

# Initialize counters
correct = 0
wrong = 0

# Loop to ask for guesses
while True:
   # Get guess from user
   guess = input("Enter a single digit guess or 'q' to quit: ")

   # Check if user wants to quit
   if guess.lower() == "q":
       print("Thanks for playing!")
       break

   # Check if guess is correct
   if guess == digit:
       print("Correct!")
       correct += 1
   else:
       print("Wrong.")
       wrong += 1

   # Move to the next digit in pi.txt
   seed += 1
   with open("pi.txt", "r") as f:
       f.seek(seed)
       digit = f.read(1)

# Print final results
print(f"Correct guesses: {correct}")
print(f"Wrong guesses: {wrong}")
```

This code opens the "pi.txt" file in read mode and reads the single line of text containing pi. It then gets the user's name and uses the length of the name as the seed value to set the initial pointer location in the file. It reads one character from the file and assigns it to the `digit` variable.

Next, the code initializes the `correct` and `wrong` counter variables to 0 (zero) and enters a loop to ask the user for guesses. If the user enters "q", the loop breaks and the game ends. If the user enters a digit guess, the code checks if it is correct or wrong and increments the corresponding counter variable. It then moves to the next digit in the file and continues the loop.

Learn more about game here:-

https://brainly.com/question/3863314

#SPJ11

B. Health Level Seven (HL7) is the middleware protocol responsible for linking all his systems in order to transfer clinical and administrative data between various systems. HL7 is a set of international standards for the transfer of clinical and administrative data between software applications used by various healthcare providers. It enables interoperability between different healthcare systems by defining a common format and structure for exchanging data.

The middleware protocol responsible for linking all healthcare systems to transfer clinical and administrative data between various systems is Health Level Seven (HL7). HL7 is a standard protocol for the exchange, integration, sharing, and retrieval of electronic health information. It acts as a bridge between different healthcare applications, systems, and devices, allowing them to communicate with each other and exchange data. HL7 provides a common language for healthcare systems and applications to exchange data, ensuring that they can understand and interpret data sent from different sources. This enables healthcare organizations to have a more complete and accurate view of a patient's medical history and healthcare data, ultimately leading to better patient care and outcomes.

Learn more about HL7 here:

https://brainly.com/question/31472625

#SPJ11

To print a month in Python without using any modules, you can create a list or a dictionary to store the month names and then use the list or dictionary to map the month number to the corresponding month name.

Python

# Define a list of month names

month_names = ["January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December"]

# Input the month number from the user

month_number = int(input("Enter the month number (1-12): "))

# Check if the entered month number is valid

if month_number < 1 or month_number > 12:

   print("Invalid month number. Please enter a number between 1 and 12.")

else:

   # Get the corresponding month name from the list

   month_name = month_names[month_number - 1]

   print("The month is:", month_name)

In this example, we define a list month_names that contains the names of the months in order. Then, we prompt the user to input a month number (between 1 and 12) using the input() function and convert it to an integer using int(). We then use the entered month number to access the corresponding month name from the list using list indexing. Finally, we print the month name using the print() function.

Read more about python here:

https://brainly.com/question/26497128

#SPJ1

The margin of error for the given values is approximately 0.587 (rounded to three decimal places).

To find the margin of error for the given values of c, o, and n, we will use the formula:

E = z × (o / sqrt(n))

where E is the margin of error, z is the critical value (based on the confidence level c), o is the population standard deviation, and n is the sample size.

c = 0.90
o = 2.5
n = 49

First, we need to find the critical value (z) for a 90% confidence level. You can refer to a z-table or online calculator for this purpose. For a 90% confidence level, the critical value (z) is approximately 1.645.

Now, plug the values into the formula:

E = 1.645 × (2.5 / sqrt(49))

E = 1.645 × (2.5 / 7)

E = 1.645 × 0.357

E ≈ 0.587

You can learn more about the margin of error at: brainly.com/question/29101642

#SPJ11

Note that the  considerations that may be important when designing an architecture could include:

Security: This is one of the most critical aspects of any architecture as it is responsible for protecting sensitive data, and ensuring that the system is not vulnerable to unauthorized access, hacking, or other security threats.

Performance: The performance of the system is another crucial factor to consider. This includes the ability of the system to handle large amounts of data, the response time of the system, and the ability of the system to scale up as required.

Reliability: An architecture should be designed to ensure the system is always available, even in the event of hardware or software failures.

Scalability: The architecture should be designed to allow the system to grow and scale as required, without requiring significant modifications or disruptions to the system.

Maintainability: An architecture should be designed to be easy to maintain, with clear documentation, and well-defined procedures for upgrading or modifying the system.

Cost: Cost is always an important factor to consider, and the architecture should be designed to be cost-effective, while still meeting the necessary performance, security, and reliability requirements.

Learn more about architecture  at:

https://brainly.com/question/2929624

#SPJ1

To answer this question, we would need more information about the "mystery" function in the Java program. Without knowing what the function does or how it is implemented, it is impossible to determine the expected number of function calls.

Based on your question, it seems that you're referring to a "mystery" function in a Java program with an input of 5. To determine the expected number of function calls, including the initial call "mystery(5)", we would need to know the logic and structure of the function itself.

To learn more about Java program, click here:

brainly.com/question/2266606

#SPJ11

The language c can be proved not context-free using the pumping lemma. Assume c is context-free language, let p be its pumping length, and consider the word [tex]w = 1^p 2^p 3^p 4^p ∈ c.[/tex]

By pumping up or down any of the 1s or 2s, the number of these symbols would no longer be equal, contradicting the definition of c. Therefore, c cannot be context-free language. The pumping lemma for context-free languages states that for any context-free language, there exists a pumping length p such that any word w in the language of length at least p can be divided into uvxyz such that |vxy| ≤ p, |vy| > 0, and for all i ≥ 0, uv^ixy^iz ∈ L. Using this lemma, we can show that c is not context-free by finding a word w that cannot be pumped.

Learn more about context-free language here:

https://brainly.com/question/29526761

#SPJ11

Below is the implementation of the expand_to_list function:

python

def expand_to_list(mid, n):

   """

   Generates a list of n numbers with mid as the middle number,

   and incremental ascending order on both sides.

   """

   result = []

   for i in range(mid - n, mid + n + 1):

       result.append(i)

   return result

Below is the corrected code with the function calls:

python

# Test cases

print(expand_to_list(5, 2))

print(expand_to_list(10, 4))

print(expand_to_list(0, 1))

Note: Please make sure to remove the extra comments in the code before running it, as they may cause syntax errors. Also, keep in mind that the expected output in the comments is incorrect, and the correct output should match the result of the expand_to_list function calls.

Read more about function here:

https://brainly.com/question/11624077

#SPJ1

Initial values of alpha and beta  in your code are typically set to 0.5 and 0.5, respectively, for a Bayesian optimization process.

Bayesian optimization is a popular method for hyperparameter tuning, and it involves constructing a probabilistic model of the objective function and using it to guide the search. The model typically uses a Gaussian process, and alpha and beta represent the hyperparameters of the prior distribution on the model. Setting them to 0.5 essentially means that we have little prior knowledge about the objective function code and want to explore the parameter space more broadly. These values can be adjusted depending on the specific problem and the amount of prior knowledge available.

learn more about code here:

https://brainly.com/question/17204194

#SPJ11

def solution(A, B):

result = 0

while B > 0:

   result += A & 1

   A >>= 1

   B >>= 1

return result

This solution focuses on correctness.

Some notes:

A & 1 performs a bitwise AND of A and 1. This checks if the least significant bit of A is 1.

A >>= 1 performs arithmetic right shift of A by 1 bit. This divides A by 2.

We continually divide A and B by 2 until B reaches 0.

At each step, we increment result if A & 1 evaluates to 1, meaning the least significant bit of A is 1.

So this counts the number of 1 bits in the binary representation of A * B.

Time complexity: O(log n) since we halve A and B in each iteration of the loop.

Space complexity: O(1)

def solution(A, B):

result = 0

while B > 0:

   result += A & 1

   A >>= 1

   B >>= 1

return result

This solution focuses on correctness.

Some notes:

A & 1 performs a bitwise AND of A and 1. This checks if the least significant bit of A is 1.

A >>= 1 performs arithmetic right shift of A by 1 bit. This divides A by 2.

We continually divide A and B by 2 until B reaches 0.

At each step, we increment result if A & 1 evaluates to 1, meaning the least significant bit of A is 1.

So this counts the number of 1 bits in the binary representation of A * B.

Time complexity: O(log n) since we halve A and B in each iteration of the loop.

Space complexity: O(1)

The two commands in the Quick Access toolbar (QAT) of AutoCAD that allow you to go backward and forward in your workflow are Undo and Redo. The Undo command allows you to go back one step in your work, while the Redo command allows you to go forward one step.

These commands are essential in the assessment of your work as they help you to correct any mistakes or errors made during the design process. there! In the AutoCAD Quick Access Toolbar (QAT), the two commands that allow you to go backward and forward in your workflow are "Undo" and "Redo." These commands help you easily reverse or reapply actions within the application.The two commands in the Quick Access Toolbar (QAT) of AutoCAD that allow you to go backward and forward in your workflow are Undo and Redo.The Undo command is used to reverse the most recent action that was performed in the drawing. For example, if you accidentally deleted a line, you can use the Undo command to restore the line to its previous state.The Redo command, on the other hand, is used to reverse the effects of an Undo command. For example, if you accidentally used the Undo command and now want to restore the action that was previously undone, you can use the Redo command.Both Undo and Redo commands are located in the QAT of AutoCAD, and can be accessed with just one click. This allows for a more efficient workflow, as it allows users to quickly reverse or restore actions without having to navigate through the menu system.In summary, the Undo and Redo commands in the QAT of AutoCAD allow users to easily go backward and forward in their workflow, providing a more efficient and productive design experience.

To learn more about Quick Access  click on the link below:

brainly.com/question//23902602

#SPJ11

To initialize an array in C#, you need to first declare the array with its data type, specify its size, and then assign values to its elements. Here's a basic example:
```csharp
int[] myArray = new int[5] {1, 2, 3, 4, 5};
```
In this example, we initialize an array of integers named `myArray` with a size of 5 and assign the values 1, 2, 3, 4, and 5 to its elements.

To initialize an array in C sharp, you can use the following syntax:

dataType[] arrayName = new dataType[length];

For example, to create an array of integers with a length of 5, you would use:

int[] myArray = new int[5];

This initializes an array named "myArray" that can hold 5 integers. You can then assign values to each element in the array by using the index position of the element.

Alternatively, you can initialize an array with values by using the following syntax:

dataType[] arrayName = {value1, value2, value3, ...};

For example, to create an array of strings with the values "apple", "banana", and "orange", you would use:

string[] fruitArray = {"apple", "banana", "orange"};

This initializes an array named "fruitArray" with three elements, each containing one of the specified strings.

learn more about c sharp here:

https://brainly.com/question/19221784

#SPJ11

The problem in the given subroutine is that the programmer should replace "==" with "equate." Therefore, option D is the correct answer.

The double equal sign "==" is used in programming to check for equality between two variables, but "equate" is not a valid operator. The programmer likely intended to use the "==" operator to check for equality in the conditional statement, but mistakenly used "equate" instead. By replacing "==" with "equate," the program will not work as expected, and the problem will persist.

In conclusion, the correct operator for checking equality in programming is "==" and replacing it with any other word like "equate" will result in an error. Thus, programmers need to be cautious while using operators and ensure that they are using the correct syntax to avoid such errors.

Option d is answer.

You can learn more about subroutine at

https://brainly.com/question/29854384

#SPJ11

The numerical value in the variable myPay is -190.

This is because of the order of operations in the expression:

hourlyRate - 10 * hoursWorked

First, 10 is multiplied by the value of hoursWorked (20), resulting in 200.

Then, that value (200) is subtracted from the value of hourlyRate (10), resulting in -190.

Therefore, the value of myPay is -190.
Hi! To find the numerical value of the variable myPay with the given equation: myPay = hourlyRate - 10 * hoursWorked, we can plug in the values of hoursWorked and hourlyRate as follows:

int hoursWorked = 20;
int hourlyRate = 10;
int myPay;

myPay = hourlyRate - 10 * hoursWorked;

Step-by-step calculation:
1. 10 * hoursWorked = 10 * 20 = 200
2. myPay = hourlyRate - 200 = 10 - 200 = -190

The numerical value in the variable myPay is -190.

to know more about numerical value here:

brainly.com/question/13085451

#SPJ11

The answer is b) do-while. The do-while loop always executes the loop body at least once because the condition is checked after the body of the loop has executed.

This means that even if the condition is false, the loop body will execute at least once before the loop terminates. A variation of the while loop is the do/while loop. Before determining whether the condition is true, this loop will run the code block once. If the condition is true, it will then repeat the loop. A do while loop is a control flow statement used in the majority of computer programming languages. It executes a block of code and, based on a given boolean condition, either repeats the block or ends the loop.

Learn more about computer here-

https://brainly.com/question/21080395

#SPJ11

True. It is recommended to set Display Number of Boxes and Weight Status to on so that customers can see the total weight and number of packages that will be delivered to them.

This helps customers to have a better understanding of the delivery process and allows them to prepare accordingly.

It is true that it is recommended to set the Display Number of Boxes and Weight Status to "on" so customers can see the total weight and number of packages to be delivered. This feature provides transparency and helps customers manage their expectations regarding the delivery of their orders.

to know more about Display Number  here:

brainly.com/question/14805682

#SPJ11

The size of the smallest ROM that is needed to implement a 32-bit full adder is 8 bytes.

A 32-bit full adder requires 32 inputs and 33 outputs, as well as 96 logic gates. Each input and output requires a flip-flop, resulting in a total of 65 flip-flops. Assuming each flip-flop requires one bit of storage, the total storage needed is 65 bits. Since ROMs are typically measured in bytes, the smallest ROM needed would be 8 bytes, as each byte consists of 8 bits.

Therefore, the size of the smallest ROM needed to implement a 32-bit full adder would be 8 bytes.

You can learn more about full adder at

https://brainly.com/question/29821668

#SPJ11

Based on the readings and videos explored in this competency, two types of communication that would work well for communicating with stakeholders about technology projects are: 1. Visual communication 2. Collaborative communication

1. Visual communication: This type of communication involves using images, graphs, charts, and other visual aids to convey information about technology projects to stakeholders. Visual communication is effective because it helps stakeholders to better understand complex technological concepts and data. For example, a visual representation of a project timeline or a graph depicting project progress can help stakeholders quickly understand the status of a technology project.

2. Collaborative communication: This type of communication involves engaging stakeholders in a collaborative process to develop and implement technology projects. Collaborative communication is effective because it allows stakeholders to participate in the decision-making process and ensures that their perspectives and concerns are considered. For example, involving stakeholders in the design and testing of new technology tools can help to ensure that the tools meet their needs and are user-friendly.

Learn more about communication here:
brainly.com/question/6753854

#SPJ11

Remainder for each division 4, +10,+22, 0.

a) When 44 is divided by 8, the quotient is 5 and the remainder is 4. This means that 44 = 8 x 5 + 4.

c) When -123 is divided by 19, the quotient is -7 and the remainder is 10. This means that -123 = 19 x (-7) + 10. Remember, the remainder must be non-negative, so we add 19 to -9 (the quotient multiplied by the divisor) to get the equivalent positive remainder of 10.

d) When -1 is divided by 23, the quotient is 0 and the remainder is -1. Again, we need a non-negative remainder, so we add 23 to -1 to get the equivalent positive remainder of 22. This means that -1 = 23 x 0 + 22.

f) When 0 is divided by 17, the quotient is 0 and the remainder is 0. This means that 0 = 17 x 0 + 0.

It is important for programmers to understand the concurrency model of their chosen language and platform and use appropriate synchronization techniques to ensure safe access to shared memory locations.

It depends on the specific programming language and operating system being used. In some cases, other processes may be able to read or modify the same memory location, leading to potential data integrity issues and race conditions. However, many modern programming languages and operating systems provide mechanisms such as locks and semaphores to prevent multiple processes from accessing the same memory location simultaneously, ensuring data consistency and preventing conflicts. When a process is reading/writing a memory location (e.g., a variable), other processes can potentially read or modify the same memory location. However, this can lead to issues such as race conditions or data inconsistency. To prevent these problems, mechanisms like mutual exclusion and synchronization techniques are used to ensure safe and accurate access to shared memory.

Learn more about division here:

https://brainly.com/question/27906996

#SPJ11

The three primary functions of a computer's operating system include managing resources, providing an interface, and ensuring security.

The three primary functions of a computer's operating system include managing resources, providing an interface, and ensuring security. In managing resources, the operating system allocates memory, CPU time, and storage space for efficient functioning of applications. Providing an interface allows users and software to interact seamlessly with the hardware, making the computer more user-friendly. Lastly, ensuring security is crucial, as the operating system implements measures to protect data and regulate access to system resources. These functions enable a well-rounded and efficient computer experience.

Learn more about functions

brainly.com/question/12431044

#SPJ11

"Using your own pre-sized images to bypass the auto-scaling process to minimise wasted download capacity and improve page loading times for your customers" is the part of the statement that is untrue.

Fotor will automatically minimise the image file size when you upload your image and specify the required width or height in pixels. The image compressor on Fotor automatically reduces the size of your image files by changing the compression ratio on each photo by a percentage.

To ensure that every picture has the same width and height, use the object fit attribute in your CSS and give your image tag or appropriate class a fixed width and height.

To know more about images visit:

https://brainly.com/question/29808174

#SPJ1

here's the pseudocode for a monitor that allocates three identical line printers to processes P1 through Pn based on their priority numbers:

```
monitor PrinterAllocation
 var numPrintersAvailable = 3
 var printerQueue: array[1..n] of condition

 procedure requestPrinter(priority: integer)
   if numPrintersAvailable = 0 then
     wait(printerQueue[priority])
   end if
   numPrintersAvailable = numPrintersAvailable - 1

 procedure releasePrinter(priority: integer)
   numPrintersAvailable = numPrintersAvailable + 1
   signal(printerQueue[priority])

 end monitor
```

In this monitor, the `requestPrinter` procedure is used by a process to request a printer based on its priority number. If no printers are available, the process is added to the queue for its priority level and waits until a printer becomes available. The `releasePrinter` procedure is used by a process to release a printer when it's done with it. When a printer is released, the monitor signals the next process in the queue for that printer's priority level, if any.

Note that this pseudocode assumes that each process knows its own priority number and calls the `requestPrinter` and `releasePrinter` procedures accordingly. Additionally, this code only allows one process to use a printer at a time. If you want to allow multiple processes to share a printer, you'll need to modify the `numPrintersAvailable` variable and the `requestPrinter` and `releasePrinter` procedures accordingly..

Learn More about pseudocode  here :-

https://brainly.com/question/13208346

#SPJ11

The k-means algorithm is a popular clustering technique, but it does have limitations. One of these limitations is its sensitivity to the initial placement of centroids.

In the given case, where σ1 = 1 and σ2 = 3, the 2-means algorithm might not approximate the optimal clustering accurately. The unequal variances of the two Gaussian distributions can lead to an overlap in the data points, making it difficult for K-means to distinguish between the two clusters accurately.

Learn more about datasets here : brainly.com/question/31190306

#SPJ11

It seems that you are trying to import a module named "arithmetic" and call a function named "calculate" from that module. However, the syntax for importing and using modules in Python is slightly different.

Assuming that the "arithmetic" module is a separate Python file that contains the "calculate" function, you need to first import the module correctly using the "import" statement, and then call the function using the module name as a prefix. Here's how you can correct the code:

python

import arithmetic

def calculate(number):

   return number * 4

print(calculate(2))

print(arithmetic.calculate(2))

Please make sure that the "arithmetic.py" file is in the same directory as the file where you are running this code, or it is accessible in your Python environment's module search path. Otherwise, you may encounter an ImportError.

Read more about code here:

https://brainly.com/question/26134656

#SPJ1

To add the appropriate amount to totalDeposit based on the user's input, you can use a switch statement. Inside the switch statement, you can check the value of usrInput and assign the corresponding amountDeposited enum value. Then, for each case, you can add the appropriate amount to totalDeposit.

Here's the modified code:

#include
using namespace std;

int main() {
   enum AcceptedCoins {ADD_QUARTER, ADD_DIME, ADD_NICKEL, ADD_UNKNOWN};
   AcceptedCoins amountDeposited = ADD_UNKNOWN;
   int totalDeposit = 0;
   int usrInput = 0;

   cout << "Add coin: 0 (add 25), 1 (add 10), 2 (add 5). ";
   cin >> usrInput;

   switch (usrInput) {
       case ADD_QUARTER:
           amountDeposited = ADD_QUARTER;
           totalDeposit += 25;
           break;
       case ADD_DIME:
           amountDeposited = ADD_DIME;
           totalDeposit += 10;
           break;
       case ADD_NICKEL:
           amountDeposited = ADD_NICKEL;
           totalDeposit += 5;
           break;
       default:
           cout << "Invalid coin selection." << endl;
           break;
   }

   cout << "totalDeposit: " << totalDeposit << endl;

   return 0;
}

In this code, the switch statement checks the value of usrInput and assigns the corresponding amountDeposited enum value. Then, for each case, it adds the appropriate amount to totalDeposit. The default case is executed if usrInput is not one of the three valid enum values. Finally, the code outputs the totalDeposit.

```cpp
#include
using namespace std;

int main() {
   enum AcceptedCoins {ADD_QUARTER, ADD_DIME, ADD_NICKEL, ADD_UNKNOWN};
   AcceptedCoins amountDeposited = ADD_UNKNOWN;
   int totalDeposit = 0;
   int usrInput = 0;

   cout << "Add coin: 0 (add 25), 1 (add 10), 2 (add 5). ";
   cin >> usrInput;

   if (usrInput == ADD_QUARTER) {
       totalDeposit = totalDeposit + 25;
   }
   /* Your solution goes here */
   else if (usrInput == ADD_DIME) {
       totalDeposit = totalDeposit + 10;
   }
   else if (usrInput == ADD_NICKEL) {
       totalDeposit = totalDeposit + 5;
   }
   else {
       cout << "Invalid coin selection." << endl;
   }
   cout << "totalDeposit: " << totalDeposit << endl;
   return 0;
}
```

In this solution, I've added two else-if statements to handle ADD_DIME and ADD_NICKEL cases, updating totalDeposit accordingly.

To know more about code here:

brainly.com/question/31228987

#SPJ11