In a walking investigation, Josephine

walked a total distance of 40 feet. At the

halfway point, she had walked for 25

seconds. She stopped for 5 seconds to tie

her shoe and then continued for 25 more

seconds. Sketch a graph that shows

Josephine's distance from the starting point

over time

Answer:

Kindly check explanation

Explanation:

Given the following information :

Distance between Angela and Blake = 15m

Angela's speed = 5m/s at t = 0

Angela's direction = Right = positive

Blake's speed = 3m/s at t = 0

Blake's direction = left = negative

Position or distance = speed × time

Hence,

Combined speed = (3 + 5) = 8m/s

Distance = 15m

Time = distance / speed

Time = 15 / 8

Time they meet = 1.875 seconds

Distance covered by Angela :

Speed × time

= 5 × 1.875 = 9.375 meters

The equation for the distance traveled by Angela is 5t and the distance covered by Angela  is 9.375 m.

The given parameter:

let the time at which Angela and Blake meet = t

The equation for the distance traveled by Angela = 5t

The time (t) at which Angela and Blake meet will be calculated using relative velocity concept:

since they are closing the distance together, we will add their velocities

(i.e they are working together and not against each other)

[tex](V_A +V_B) t = 15\\\\(5 + 3) t = 15\\\\8t = 15\\\\t = \frac{15}{8} \\\\t = 1.875 \ s[/tex]

The distance covered by Angela = 1.875 s x 5 m/s = 9.375 m

The distance covered by Blake = 1.875 x 3 m/s = 5.625 m

Learn more here: https://brainly.com/question/2312318

Answer:

2.A flowerpot falling from a balcony

Explanation:

Potential energy is the internal energy within a body at rest or at a height above the ground. In this case of the falling flowerpot, the flowerpot initially has a potential energy due to its position on the balcony above the surface of the earth. As the flowerpot falls, the work done against gravity in taking the flowerpot to this height on the balcony (equivalent to the potential energy) is transformed into the kinetic energy of motion as the flowerpot falls down through the height.

Answer:

288W.

Explanation:

P = IV = V^2 / R = (120)^2 / 50 = 288W.

Answer:

Explanation:

*Hope this helps*

Answer:

2.05pm.

Explanation:

In the picture.

Answer:

Fats can be identified with a paper without any chemical. Just the food sample in Fats should be placed on the first paper than the rest three papers should be placed on and if any marks are there that shows the quantity of presence in Fats.

Explanation:

Plz Mark me as brainliest

The diameter of the reflecting surface of spherical mirror is called its aperture. Mirrors whose aperture is much smaller than its radius of curvature, we use R=2f.

Answer:

A) The distance between the stations is 1430m

B) The time it takes the train to go between the stations is 80s

Explanation:

First we will calculate the distance covered for the first 20s.

From one the equations of kinematics for linear motion

[tex]S = ut + \frac{1}{2}at^{2} \\[/tex]

Where [tex]S[/tex] is distance traveled

[tex]u[/tex] is the initial velocity

[tex]t[/tex] is time

and [tex]a[/tex] is acceleration

Since the train starts from rest, [tex]u[/tex] = 0 m/s

Hence,  for the first 20s

[tex]a =[/tex] 1.1 m/s²; [tex]t =[/tex] 20s,  [tex]u[/tex] = 0 m/s

∴ [tex]S = ut + \frac{1}{2}at^{2} \\[/tex] gives

[tex]S = (0)(20) + \frac{1}{2}(1.1)(20)^{2}[/tex]

[tex]S = \frac{1}{2}(1.1)(20)^{2}[/tex]

[tex]S =[/tex] 220m

This is the distance covered in the first 20s.

Now, we will calculate the speed attained here

From

[tex]v = u +at[/tex]

Where [tex]v[/tex] is the final velocity

Hence,

[tex]v = 0 + 1.1(20)[/tex]

[tex]v = 1.1(20)[/tex]

[tex]v =[/tex] 22 m/s

This is the constant speed attained when it proceeds for 1100m

We can calculate the distance covered while slowing down from

[tex]v^{2} = u^{2} + 2as[/tex]

The initial velocity, [tex]u[/tex] here will be the final velocity before it started slowing down

∴[tex]u[/tex] = 22 m/s

The final velocity will be 0, since it came to a stop.

∴ [tex]v[/tex] = 0 m/s

[tex]a = -[/tex]2.2 m/s² ( - indicates deceleration)

Hence,

[tex]v^{2} = u^{2} + 2as[/tex] gives

[tex]0^{2} =22^{2} +2(-2.2)s[/tex]

[tex]0=22^{2} - (4.4)s\\4.4s = 484\\s = \frac{484}{4.4} \\s = 110m[/tex]

This is the distance traveled while slowing down.

A) The distance between the stations is

220m + 1100m + 110m

= 1430m

Hence, the distance between the stations is 1430m

B) The time it takes the train to go between the stations

The time spent while accelerating at 1.1 m/s² is 20s

We will calculate the time spent when it proceeds at a constant speed of 22 m/s for 1100m,

From,

[tex]Speed =\frac{Distance}{Time}\\[/tex]

Then,

[tex]Time = \frac{Distance}{Speed}[/tex]

[tex]Time = \frac{1100}{22}[/tex]

Time = 50 s

And then, the time spent while decelerating (that is, while slowing down)

From,

[tex]v = u + at\\0 = 22 +(-2.2)t\\2.2t = 22\\t = \frac{22}{2.2} \\t= 10 s[/tex]

This is the time spent while slowing down until it stops at the station.

Hence, The time it takes the train to go between the stations is

20s + 50s + 10s = 80s

The time it takes the train to go between the stations is 80s

Answer:

The answer is A.

Explanation:

Electrons are found outside of a nucleus.

Answer:

v = √2gh

v = 7 m / s

Explanation:

For this exercise we can use the law of conservation of energy

starting point. In the roof

         Em₀ = U = m g h

final point. On the floor

          Em_f = K = ½ m v²

as there is no friction, the energy is conserved

          Em₀ = Em_f

          m g h = ½ m v²

          v = √2gh

In the exercise the height of the ceiling is not indicated, but in general the height of the ceiling of a house is h = 2.5 m

         v = √ (2 9.8 2.5)

         v = 7 m / s

Answer:

35700000

Explanation:

multiply the meter value by 1e+9

Answer:

35700000 nanometers

Explanation:

Answer:

Explanation:

1 )

F = k q₁q₂ / r² where k = 9 x 10⁹

So force F₁ =  [tex]\frac{kq_1q_2}{(\frac{r}{2}+\frac{\sqrt{9} r}{2})^2 }[/tex]

= [tex]\frac{kq_1q_2}{(\frac{r}{2}+\frac{3 r}{2} )^2 }[/tex]

= k q₁q₂ /4 r²

F₁  =  F / 4

2 ) Electric field due to charge density σ

= σ / ε₀

So net electric field between the plates

=   ( σ₁ - σ₂ )  / ε₀

Force on charge  q

=  ( σ₁ - σ₂ ) q   / ε₀

work done = force x displacement

=  ( σ₁ - σ₂ ) x q x d   / ε₀

Answer:

A wave in which the medium vibrates at right angles to the direction of the propagation is called transverse wave.

Answer:

7.70

7.700

Explanation:

We can simply add zeros behind the significant figures and they would still be equivalent to 7.7

Answer: A decrease in acceleration causes the mass to increase.

Explanation:

Let's rewrite this as:

"For a constant force F, we can see that heavier objects accelerate less"

Then, as the mass increases, the acceleration of the object decreases.

This is known as an inverse relationship between acceleration and mass.

By second Newton's law we have that:

F = m*a

Force equals mass times acceleration.

So if the force is constant, we can write it as:

a = F/m.

In this equation, we can see that, if the acceleration decreases and F remains constant, then the mass m must increase (because it is in the denominator)

Then the correct option is:

A decrease in acceleration causes the mass to increase.

Answer:

There is a negative correlation between mass and acceleration.

Explanation:

Facundo is wrong. I got this wrong thanks to Facundo!

Answer:

the light relflects off them and creates a image

Answer:

When photons - rays of light - coming from an object (your smiling face, for example) strike the smooth surface of a mirror, they bounce back at the same angle. Your eyes see these reflected photons as a mirror image.... If a smooth surface absorbs the photons, they can't bounce back and there will be no reflection.

Explanation:

*Hope this helps*

Answer:

The prokaryotic cells are smaller than the eukaryotic cells.

Explanation:

Its just the simple process of elimination. Prokaryotic cells lack of a lot of things, including mitochondria, so it couldn't be option C. BOTH prokaryotic and eukaryotic cells have cytosol AND ribosomes, so the answer couldn't be D or A, and you're left with option B. Meaning option B is the correct choice.

Answer:

Because concave mirror focus the sunlight at one particular point . At that particular point , amount of sunlight is converged and heat is trapped at that point . This is because , it burn the paper on which the image is focussed .

Answer:

The distance reached is 14.3 m.

Explanation:

To find the distance reached by the diamond first we need to find the flight time:

[tex] t_{v} = \sqrt{\frac{2h}{g}} [/tex]

Where:

h: is the height = 10m

g: si the gravity = 9.81 m/s²

[tex] t_{v} = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2*10 m}{9.81 m/s^{2}}} = 1.43 s [/tex]

Now, we can find the distance reached:

[tex] x = V_{0_{x}}*t_{v} [/tex]

Where:

[tex]V_{0_{x}}[/tex] is the initial horizontal velocity = 10 m/s

[tex] x = V_{0_{x}}*t_{v} = 10 m/s*1.43 s = 14.3 m [/tex]

Therefore, the distance reached is 14.3 m.

I hope it helps you!    

Answer:3000km/h

Explanation:

speed=distance/time

216,000km/72hrs

=3000km/h

Well, first of all, if there are astronauts aboard that ship, I hope they don't try to climb out yet.  If they pointed straight at the moon and covered 216,000 km so far, they still have another 168,000 km to go before they get there.

Average Speed = (distance) / (time)

Speed = (216,000 km) / (72 hours)

Average Speed = 3,000 km/hr

also

Speed = (216,000 km) x (1000m/km) / (72 hr x 3600sec/hr)

Average Speed = 833.33 m/s

There's not enough information given to find the ship's velocity.

Answer:

4.55 seconds

Explanation:

Speed=distance / Time

So Time = Distance /speed

=1550/340

Answer:

In a closed-loop system, matter is used to generate energy, and the energy generated is used to produce matter, and the cycle goes on without end.

Explanation:

A closed-loop system is one in which materials or energy is recycled without end through a production cycle. This means that a raw material is used to produce a finished product, and the finished product at the end of its use cycle is converted back and used as a raw material to produce more of it again. Energy and matter can also be cycled in the same way in an energy and matter closed-loop system, converting matter to energy, and the energy is put back into the production of more of the matter.

In a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

The closed system loop can be defined as the system in which the products and energy has been recycled continuously to form more products. The energy has been formed in the closed system loop, that can be utilized by the raw materials for the production of energy.

The products formed after reaching the equilibrium of the formation, and dissociation reaches the point, and starts to dissociate to provide the raw material to the system.

Thus, in a closed system loop, the matter has been recycled to provide raw material and form new products. The energy formed by the product has been recycled by being used by the raw materials for the formation of new products.

For more information about a closed system loop, refer to the link:

https://brainly.com/question/11995211

Answer:

So B

Explanation:

The statement that the energy involved in diffusion is as follows:

Thus, the correct option is C.

Diffusion may be defined as the process of migration of substances or molecules through a semipermeable membrane from an area of higher concentration to an area of lower concentration.

Diffusion does not require energy because it is classified under the passive transport of materials. Diffusion always works towards the concentration gradient.

Energy is typically involved when the movement occurs against the concentration gradient like active transport.

Therefore, the correct option for this question is C.

To learn more about Diffusion, refer to the link;

https://brainly.com/question/94094

#SPJ6

Answer:

Call a treatment service. Seek out a healthcare professional. Lastly, report the issue to the local authorities.

Why did I choose these?

You call the treatment services to take care of the person.

You seek out a healthcare professional to get him/her back in shape.

Then you report the issue so that nobody will be endangered by the person that is abusing alcohol. Many accidents occur because of this and that is why you report it.

Explanation:

Answer:

1.53 m/s²

Explanation:

Given:

Δx = 400 m

v₀ = 0 m/s

v = 35 m/s

Find: a

v² = v₀² + 2aΔx

(35 m/s)² = (0 m/s)² + 2a (400 m)

a = 1.53 m/s²

Answer:

Gravitational potential energy

Explanation:

Gravity would act upon it if it were not suspended.

Answer: Gravitational potential energy

Explanation: I did the quiz! Hope it helped!

Answer:

Yes, a sled has inertia while sitting still.

Explanation:

From Newton's law of inertia, an object at rest will remain at rest unless it is acted upon by an external force. The reason the object will remain at rest unless an external force acts is because of inertia. Inertia means the resistance of an object to motion.

Thus, a sled hammer at rest will remain at rest unless it is acted upon by an external force. So we can conclude that it has Inertia.