Answers
This question is incomplete, the complete question is;
In a softball windmill pitch, the pitcher rotates her arm through just over half a circle, bringing the ball from a point above her shoulder and slightly forward to a release point below her shoulder and slightly forward. (Figure 1) shows smoothed data for the angular velocity of the upper arm of a college softball pitcher doing a windmill pitch; at time t = 0 her arm is vertical and already in motion. For the first 0.15 s there is a steady increase in speed, leading to a final push with a greater acceleration during the final 0.05 s before the release. In each part of the problem, determine the corresponding quantity during the first 0.15 s of the pitch.
Angular Velocity at time 0s = 12 rad/s
Angular Velocity at time 0.15s = 24 rad/s
a) What is the angular acceleration?
b) If the ball is 0.60 m from her shoulder, what is the tangential acceleration of the ball? This is the key quantity here--it's a measure of how much the ball is speeding up. Express your answer in m/s2 and in units of g
Answer:
a) the angular acceleration is 80 rad/s²
b) the tangential acceleration of the ball is;
- a = 48 m/s²
- a = 4.9 g
Explanation:
Given the data in the question;
from the graph below;
Angular Velocity at time 0s [tex]w_o[/tex] = 12 rad/s
Angular Velocity at time 0.15s [tex]w_f[/tex] = 24 rad/s
a) What is the angular acceleration;
Angular acceleration ∝ = ( [tex]w_f[/tex] - [tex]w_o[/tex] ) / dt
we substitute
Angular acceleration ∝ = ( 24 - 12 ) / 0.15
Angular acceleration ∝ = 12 / 0.15
Angular acceleration ∝ = 80 rad/s²
Therefore, the angular acceleration is 80 rad/s²
b)
If the ball is 0.60 m from her shoulder, i.e s = 0.6 m
the tangential acceleration of the ball will be;
a = ∝ × s
we substitute
a = 80 × 0.6
a = 48 m/s²
a = ( 48 / 9.8 )g
a = 4.9 g
Therefore, the tangential acceleration of the ball is;
- a = 48 m/s²
- a = 4.9 g
Related Questions
Maglev, a vehicle that glides above a magnetic field without touching a track, make a 624-mile trip in 4 hours. What is the speed of the vehicle?
Answers
Answer:
The speed of the vehicle is 156 miles per hour.
Explanation:
Let suppose that the Maglev, that is, a vehicle who works on the principle of superconductive magnetic levitation, moves at constant speed. Hence, the speed of the vehicle ([tex]v[/tex]), in miles per hour, is defined by this kinematic model:
[tex]v = \frac{s}{t}[/tex] (1)
Where:
[tex]s[/tex] - Travelled distance, in miles.
[tex]t[/tex] - Time, in hours.
If we know that [tex]s = 624\,mi[/tex] and [tex]t = 4\,h[/tex], then the speed of the vehicle is:
[tex]v = \frac{624\,mi}{4\,h}[/tex]
[tex]v = 156\,\frac{mi}{h}[/tex]
The speed of the vehicle is 156 miles per hour.
3. How do you think a hot air balloon works?
Answers
Answer:hot air
Explanation:Hot air goes up, so when you put it in a hot air balloon fire is placed at the oppening to creat hot air and lift the balloon! :)
At 2:00, Alice was traveling in a car at 40 miles/hour. She then slows down, and at 4:00, she was traveling at 20 miles/hour.
What was Alice’s average acceleration between 2:00 and 4:00?
Show your complete calculation and state your answer with the correct units.
Answers
Answer:
-10miles/hr²
Explanation:
a = ∆v/∆t
Where:
a = acceleration (miles/hr²)
∆V = change in velocity (miles/hr)
t = time (hour)
The change in time is from 2:00 - 4:00 ∆t = 2 hours.
The distance covered is as follows: 20miles/hour - 40 miles/hr
∆v = -20miles/hr
Using a = ∆v/∆t
a = -20/2
a = -10miles/hr²
PLEASE HELPPPPPP ME PLS PLS
Answers
In the early 1900s, it was proposed that the law of conservation of mass should be simultaneously considered with the law of conservation of energy to explain particular phenomena. Thus, a theory of conservation of mass-energy was proposed. Which of the following reasons could provide evidence to support the proposed theory?
A. After charged particles travel a complete loop around a circuit, the electric potential energy of the charged particles does not change, but the number of available charged particles that can move through the circuit is reduced. This is because charged particles are used in order for circuit elements to operate correctly.
B. After a photon of light is absorbed by certain metals, electrons are found to be ejected from the metals. This is because the energy contained in the massless photon is used to eject an electron with mass out of the metal.
C. After particles of a hot gas collide with other particles in the gas, the initial combined mass of all particles of the gas immediately before the collisions occur is not equal to the final combined mass of all particles immediately after the collisions. This is because some of the particles in the gas are destroyed in the collisions.
D. After the decay of certain unstable nuclei, the initial mechanical energy of an unstable nucleus is not equal to the final mechanical energy of the resultant particles immediately after the decay process. This is because some of the available mechanical energy is converted into a particle that was originally not accounted for.
Answers
Answer:
B. After a photon of light is absorbed by certain metals, electrons are found to be ejected from the metals. This is because the energy contained in the massless photon is used to eject an electron with mass out of the metal.
Explanation:
Before, in the early days, it was proposed to form a combined theory by joining the theory of conservation of mass and the theory of conservation of energy and form a combined theory of conservation of mass-energy. It was done to explain a particular theory of [tex]$\text{photoelectric effect}$[/tex].
The [tex]$\text{photoelectric effect}$[/tex] is the emission of the electrons form the surface of a metal when light energy strikes on it. Here, in this phenomenon, both mass and energy is conserved.
When the light strikes a metal surface, electrons gets ejected from the surface. The energy of the photon is used to eject the electron form the metal surface.
A current is maintained in a simple circuit that consists of a resistor between the terminals of an ideal battery. If the battery supplies energy at a rate of W, how large is the resistance
Answers
Answer:
Resistance is as large as 2.8 ohm
Explanation:
Complete question
A 3.0 A current is maintained in a simple circuit that consists of a resistor between the terminals of an ideal battery. If the battery supplies energy at a rate of 25 W, how large is the resistance?
Solution -
The relation between Power and current is as follows
P = I^2*R
R = P/I^2
Were P = Power
R = resistance and
I = current
Given-
P = 25 W
I = 3.0 A
Substituting the given values, in above equation, we get -
R = 25/3.0^2
R = 2.8 ohm
How are the Northern Lights are formed.
Answers
Answer:
Bottom line: When charged particles from the sun strike atoms in Earth's atmosphere, they cause electrons in the atoms to move to a higher-energy state. When the electrons drop back to a lower energy state, they release a photon: light. This process creates the beautiful aurora, or northern lights.Explanation:
^-^I hope it's help uA 4.9 A current is set up in a circuit for 4.7 min by a rechargeable battery with a 12 V emf. By how much is the chemical energy of the battery reduced
Answers
Answer:
E = 16581.6 J
Explanation:
Given that,
Current, I = 4.9 A
Time for which the current is set up, I = 4.7 min = 282 s
The voltage of the battery, V = 12 V
We need to find how much chemical energy of the battery reduced. Let It is E. We know that,
E = P t
Where
P is power of battery, P = VI
So,
[tex]E=VIt[/tex]
Put all the values,
[tex]E=12\times 4.9\times 282\\E=16581.6\ J[/tex]
So, 16581.6 J of chemical energy of the battery is reduced.
a train is traveling at 50km/h average .what is the displacement of the train per second?
Answers
I believe this is the answer
please someone help me full out the blanks
Answers
B = reflection
C = bending of light when it passes through a transparent object
The diagram shows a transistor used in a circuit.
A signal with a small change in voltage is input into a circuit that includes a transistor connected to 4 resistors and 2 capacitors. The signal output from the transistor has a much larger change in voltage than the input.
What does the diagram show?
an NPN transistor used as an amplifier
an NPN transistor used as a switch
a PNP transistor used as an amplifier
a PNP transistor used as a switch
Answers
Answer:
a PNP transistor used as an amplifier
Explanation:
The diagram show a PNP transistor used as an amplifier.PNP transisitor having one 2 P type and the 1 N type of semiconductor.
What is PNP transistor?This bipolar PNP junction transistor is made up of three layers of semiconductor material, two of which are P-type & one of which is N-type. It consists of three terminals.
The transistor's emitter allows it to supply the majority of charge carriers. In relation to the ground, the emitter always is forward biased.
As a result, the base receives the vast majority of charge carriers. A transistor's emitter is strong and of modest size.
The collector collects the vast majority of the charge carrier delivered by the emitter. Reverse bias is always present at the collector-base junction.
The charge collector region is moderately mixed and capable of collecting the charge.
The diagram shows a transistor used in a circuit.
A signal with a small change in voltage is input into a circuit that includes a transistor connected to 4 resistors and 2 capacitors. The signal output from the transistor has a much larger change in voltage than the input.
The diagram show a PNP transistor used as an amplifier.
Hence option C is correct.
To learn more about the PNP transistors refer to the link;
https://brainly.com/question/1492057
To find the specific heat capacity of a solid of mass 600 g whose temperature was 40oC, it was placed in a calorimeter that contains 25 g of water 10oC. The mixture reached a final temperature of 25oC. How much is the metal's specific heat capacity? (Cwater = 4180 J/Kg.K)
500J/Kg.K
250J/Kg.K
174J/Kg.K
2000J/Kg.k
Answer and I will give you brainiliest
Answers
Answer:
m of solid = 600g = 0.6kg
T=40°C
It was placed in a calorimeter that contains 25g(0.025kg) of water at 10°C
Now. We would have considered the calorimeter in this solving because it will be at the same temp as the water which it is holding. Example... If you put a hot water inside a Cup... The cup itself will become hot and have the same temp as the water you put in it ...
But in this question... We'll Ignore the Calorimeter and the heat gained by it since no parameter was given for it and also We don't know the material which the calorimeter is made of.
So
Since the Solid is at a higher temp(40°)... It will lose heat to water; which is at a lower temp.
From the question... THE EQUILIBRIUM TEMPERATURE REACHED IS 25°C
Then
Temp Change for solid(heat loss) = 40-25=15°C
Temp Change for water(heat gain)= 25-10 =15°C
Heat lost by solid = Heat gained by water
MC∆T = MC∆T
0.6 x C x 15 = 0.025 x 4180 x 15
C= 0.025x4180x15÷(0.6x15)
C= 174.16 ~ 174J/Kg.K.
OPTION C IS LEGIT
People who do very detailed work close up, such as jewellers, often can see objects clearly at much closer distance than the normal 25 cm. a. What is the power in D of the eyes of a woman who can see an object clearly at a distance of only 8.5 cm
Answers
This question is incomplete, the complete question is;
People who do very detailed work close up, such as jewelers, often can see objects clearly at much closer distance than the normal 25 cm.
a) What is the power in D of the eyes of a woman who can see an object clearly at a distance of only 8.50 cm? (Assume the lens-to-retina distance is 2.00 cm.)
b) What is the size in mm of an image of a 8.00 mm object, such as lettering inside a ring, held at this distance? (Include the sign of the value in your answer.) __ mm
Answer:
1) the power in D of the eyes of a woman is 61.7647 D
2) the size in mm of an image of a 8.00 mm object is -1.882 mm
Explanation:
Given the data in the question;
a) power in D of the eyes of woman who can see an object clearly at a distance of only 8.5 cm and the lens-to-retina distance is 2.00 cm,
so
u = 8.5 cm = ( 8.5 / 100 )m = 0.085 m
v = 2.00 cm = ( 2 / 100 )m = 0.02 m
Now, we know that power of lens p = 1 / u + 1 / v
so we substitute
p = ( 1 / 0.085 ) + ( 1 / 0.02 )
p = 11.7647 + 50
p = 61.7647 D
Therefore, the power in D of the eyes of a woman is 61.7647 D
b) What is the size in mm of an image of a 8.00 mm object, such as lettering inside a ring, held at this distance? (Include the sign of the value in your answer.)
we know that;
m = -v / u
we substitute
m = -0.02 / 0.085
m = -0.2353
since H₀ = 8.0 mm
H[tex]_i[/tex] = m × H₀
H[tex]_i[/tex] = -0.2353 × 8.0
H[tex]_i[/tex] = -1.882 mm
the size in mm of an image of a 8.00 mm object is -1.882 mm
A drunken sailor stumbles 550 meters north, 500 meters northeast, then 450 meters northwest. What is the total displacement and the angle of the displacement
Answers
Answer:
Resultant displacement = 1222.3 m
Angle is 88.3 degree from +X axis.
Explanation:
A = 550 m north
B = 500 m north east
C = 450 m north west
Write in the vector form
A = 550 j
B = 500 (cos 45 i + sin 45 j ) = 353.6 i + 353.6 j
C = 450 ( - cos 45 i + sin 45 j ) = - 318.2 i + 318.2 j
Net displacement is given by
R = (353.6 - 318.2) i + (550 + 353.6 + 318.2) j
R = 35.4 i + 1221.8 j
The magnitude is
[tex]R = \sqrt{35.4^{2}+1221.8^{2}}R = 1222.3 m[/tex]
The direction is given by
[tex]tan\theta =\frac{1221.8}{35.4}\\\\\theta = 88.3^{o}[/tex]
Which of these is NOT an effect of humor?
strengthened immune system
reduced stress levels
reduced feelings of anxiety
feelings of jealousy and envy
Answers
When thrust is doubled, pressure is______.
Answers
Answer:
doubled
Explanation:
When thrust is double so will the pressure I hope this helps
enjoy
A cart weighing 40 pounds is placed on a ramp incline 15 degrees to the horizon. The cart is held in place by a rope inclined 60 degrees to the horizontal. find the force that the rope must exert on the cart to keep it from rolling down the ramp.
Answers
Answer: [tex]14.64\ N[/tex]
Explanation:
Given
Inclination of ramp is [tex]\theta=15^{\circ}[/tex]
Rope is inclined [tex]\phi=60^{\circ}[/tex] to the horizontal
Weight of cart [tex]W=40\ lb[/tex]
from the diagram, rope is at angle of [tex]45^{\circ}[/tex] w.r.t ramp
Sine component of weight pulls down the cart Cosine component of force applied through rope held it at the position
[tex]\Rightarrow 40\sin 15^{\circ}=F\cos 45^{\circ}\\\\\Rightarrow F=40\cdot \dfrac{\sin 15^{\circ}}{\cos 45^{\circ}}\\\\\Rightarrow F=40\times 0.366\\\Rightarrow F=14.64\ N[/tex]
How is a continuous spectra is formed?
Answers
Answer:
Hello There!!
Explanation:
They are produced by the photodissociation of negatively charged hydrogen ions (H−).
hope this helps,have a great day!!
~Pinky~
After turning on the power source connected to your two electrodes, we expect to see the microbeads moving through the solution. What forces are acting on the microbeads as they move (ignore vertical forces)
Answers
Answer:
the pearls have an electrical charge induced by contact with the ions of the solution and these charges are attracted by the electrode by a force electric
Explanation:
The pearls are suspended in a solution, when connecting the power source, it is subjected to an electric shock, the pearls have an electrical charge induced by contact with the ions of the solution and these charges are attracted by the electrode by a force electric
F = q E
A string has a linear density of 8.5 x 10-3 kg/m and is under a tension of 280 N. The string is 1.8 m long, is fixed at both ends, and is vibrating in the standing wave pattern shown in the drawing. Determine the
a. speed.
b. wavelength
c. frequency of the traveling waves that make up the standing wave.
Answers
Answer:
a) [tex]v=181.497m/s[/tex]
b) [tex]\lambda=1.2[/tex]
c) [tex]F=151.248hz[/tex]
Explanation:
From the question we are told that:
Linear density [tex]\rho=8.5 x 10-3 kg/m[/tex]
Tension [tex]T= 280 N[/tex]
Length of string [tex]l= 1.8 m[/tex]
a)
Generally the equation for Speed of travelling wave is mathematically given by
[tex]v=\sqrt{\frac{T}{\rho}}[/tex]
[tex]v=\sqrt{\frac{280}{8.5*10^{-3}}[/tex]
[tex]v=181.497m/s[/tex]
b)
From the Drawing
Wavelength is given as
[tex]\lambda=\frac{2L}{3}[/tex]
[tex]\lambda=\frac{2*1.8}{3}[/tex]
[tex]\lambda=1.2[/tex]
c)
Generally the equation for Frequency of travelling wave is mathematically given by
[tex]F=\frac[v}{\lambda}[/tex]
[tex]F=\frac[181.497}{1.2}[/tex]
[tex]F=151.248hz[/tex]
Which of the following statements about the electromagnetic spectrum is true?
A. It moves slower than the speed of light
B. It's consisting of waves of varying lengths
C. the slowest is wavelengths are orange and red
D. Scientist can only detect waves of visible light
Answers
Answer:
B. its consist of waves of varying lengtu
Two gerbils run in place with a linear speed of 0.55 m/s on an exercise wheel that is shaped like a hoop. Find the rotational kinetic energy of the wheel if the exercise wheel has a radius of 9.5 cm and a mass of 5.0 g. Each gerbil has a mass of 0.02 kg if you think that is important.
Answers
Answer:
K = 7.56 10⁻⁴ J
Explanation:
The rotational kinetic energy is
K = ½ I w²
They ask us for the kinetic energy of the wheel, which can be approximated as a thin ring, its moment of inertia is
I = M r²
the linear speed of the gerbils is equal to the linear speed of the wheel. The linear and rotational variables are related
v = w r
w = v / r
we substitute
K = ½ (M r²) v² / r²
K = ½ M v²
let's calculate
K = ½ 5 10⁻³ 0.55²
K = 7.56 10⁻⁴ J
(10) The use of Doppler radar for speed detection and enforcement on the roads is very common and has been in use for a long time. Suppose a 10 GHz radar (also called radar gun or speed gun) measures the speed of a car at 120 km/h moving towards the radar gun. a. What is the change in the frequency of the reflected wave due to the speed of the car b. Calculate the sensitivity of the device in [Hz/km].
Answers
Answer:
The sensitivity of the device = 1.234 Hz per km
Explanation:
Given
Frequency (f) = 10 gHz
Speed of the car = 120 Km/h
As per the doppler’s effect
V = (change in frequency /frequency) *(c/2)
Substituting the given values, we get –
Change in frequency = {(2*10^9*120)/(3*10^8)} * (1000/3600)
Change in frequency = 37.03 Hz
b) speed of light = wavelength * frequency
3*10^8 = wavelength * 10*10^9
Wavelength = 0.03 m
Sensitivity = change in frequency /wavelength = 37.03/0.03 = 1234 Hz/m
1.234 Hz per km
two 100 ohm resistors are connected inparallel and one identical resister in series. The maximum power that can be delivered to any one resistor is 25W. What is the maximum voltage that can be applied between the terminals A and B ?
A. 50V
B. 75V
C. 100V
D. 125V
Answers
SOLVED DOWN BELOW
Explanation:
In series the same current goes thru both resistors, equiv resistance is 200 ohms, then using ohms law
I = 25/200
I= .125 amps or 125 ma
__________
R= r1 * r2 / r1 +r2
R= 100 * 100 / 100 + 100
R= 10000 / 200
R= 50 ohms
please help for 21! will mark brainliest
Answers
The answer for this question is D
Which describes the greenhouse effect?
a. an artificial process
b. a dangerous process
c. a natural process
d. new process
Answers
c. a natural process
It is a natural process
Explain how muscles are effected by space travel
Answers
Answer: Because astronauts work in a weightless environment, very little muscle contraction is needed to support their bodies or move around.
Without regular use and exercise our muscles weaken and deteriorate. It’s a process called atrophy.
Have a great day.
a. 2.00kg object is subject to three force that gives acceleration a =8m/s^2 i +6m/s j if two of three forces are f1 =(30.0N)+(16N )and f2 =-(12.0N)+(8.0N) find the third force
Answers
By Newton's second law, the net force on the object is
∑ F = m a
∑ F = (2.00 kg) (8 i + 6 j ) m/s^2 = (16.0 i + 12.0 j ) N
Let f be the unknown force. Then
∑ F = (30.0 i + 16 j ) N + (-12.0 i + 8.0 j ) N + f
=> f = (-2.0 i - 12.0 j ) N
Since when was the light we see now emanating from the quasar? Note that the distance between the Earth and the quasar is 598 Mpc
Answers
Physics part 1
I need help answering these
Answers
Answer:
lhchccyohchocohchocoyxtidts8ts58d85dtitxicyi