I need help please .

I Need Help Please .

Answers

Answer 1

Answer:

option 5

Explanation:

because all u do is have to add them up


Related Questions

What happened to the pod during those seconds when communication was lost?

Answers

Answer:

Explanation:

From our investigation of what forces are like in a collision, we learned that when two

objects collide, a force is exerted on each object. The two forces are in opposite

directions but the same strength. This allowed us to infer that an equal strength force

was exerted on the space station and the pod, but in opposite directions.

As a result, the space station and the pod are moving in opposite directions. We need to

learn more about the effects of collisions on each object’s motion so we can report back

to Dr. Gonzales at the space agency.

You will use physical materials to gather data about

forces in a collision. You will also notice how objects

are affected by collisions. Students will use their

data to infer the force direction for objects in a

collision.

Based on the velocity change of each object,

what did you infer about the direction of forces

during a collision?

• We observed that the velocity of each object changed during a collision, so we can infer

that a force had to be exerted on each object. However, the motion of the objects

changed in different ways.

• The object that was moving forward slowed down, so I can infer that the force must have

pushed backward on this object.

• The other object started moving forward, so the force must have pushed forward on that

object. If one force was backward and one force was forward, then the forces pushed

the objects in opposite directions.

In Bohr's model, the position of the electron (with the monochromatic light on)... Group of answer choices is restricted to orbits or certain radii, but the electron may be observed between these orbits when it moves. is restricted to orbits of certain radii around the nucleus. The position may change, but it must be in one of these orbits. is not constrained. The electron may be found anywhere outside of the nucleus.

Answers

Answer:

True.  it is restricted to the orbits of certain radii around the nucleus.

The position can change, but it must be in one of these orbits

Explanation:

In this exercise some affirmations are given and you must select which ones are correct, for this we review the Bohr atomic model that has the following postulates:

* the orbits are circular

* Only certain orbits are stable, stationary state

* the radiation emitted is the difference in energy between two stable orbits

* the size of the orbit is given by the quantization of the angular momentum

             L = n [tex]\hbar[/tex]

When reviewing the different statements, the correct one is:

* it is restricted to the orbits of certain radii around the nucleus.

The position can change, but it must be in one of these orbits

ANSWER THIS! Which of these statements about the Sun is the result of its closeness to Earth? A) It is the only star with a gravitational pull. B) It is the largest star in the Milky Way Galaxy. C) It appears (from Earth) to be the brightest star. D) It has the lowest temperature of any star seen from Earth.

Answers

Answer:

C) It appears (from Earth) to be the brightest star.

Explanation:

This is because due to sun's brightness we can predict its distance.

A 1500 kg car traveling at 30 m/s hits a stationary 1200 kg car. If they stick together on collision, what is the final velocity of the two cars?

Answers

Answer:

16.67 m/s

Explanation:

Let that velocity be v.

Using conservation of momentum:

Initial momentum = final momentum

momentum of car1 = momentum of cars

mass1 x velocity1 = (m1 + m2)v

1500*30 = (1500 + 1200)v

45000/2700 = v

16.67 m/s = v

Please Help!!!!!
Belinda observes that the reaction 2H2O+O2=2H2O2 appears to have stopped, because the concentrations of reactants and products are not changing. Which statement is true at this point in the reaction
A P E X

Answers

Answer: Molecules of H202, H20 and 02 are still forming. ( A P E X )

Explanation: I know this is late but for anyone looking at this later

The above question is incomplete, I think the original  question is

Belinda observes that the reaction 2H20+02 2H2O2 appears to have stopped because the concentrations of reactants and products are not changing. Which statement is true at this point in the reaction?

A. Molecules of H₂O₂ are formed only when the reaction vessel is disturbed.

B. Molecules of H2O2 have stopped forming.

C. Molecules of H20 and O₂ have stopped forming.

D. Molecules of H2O2, H2O, and O2 are still forming.

At this point in the reaction, the system has reached a state of equilibrium i.e there is no net change in the concentrations of reactants and products. So the Molecules of H2O2 have stopped forming. The correct option is B.

What is the state of equilibrium?

In chemistry, a state of equilibrium refers to a situation where the concentrations of reactants and products in a chemical reaction are no longer changing over time.

This occurs when the rates of the forward and reverse reactions are equal, and there is no net change in the concentrations of reactants and products.

At equilibrium, the system is in a dynamic state, where the forward and reverse reactions continue to occur, but at the same rate, resulting in no overall change in the concentrations of the species involved in the reaction. The equilibrium state is typically characterized by the equilibrium constant, which is a measure of the relative concentrations of reactants and products at equilibrium for a given reaction under specific conditions of temperature, pressure, and concentration.

Here in this question,

The molecules of H2O2 have stopped forming. This means that the forward reaction (2H2O + O2 → 2H2O2) and the reverse reaction (2H2O2 → 2H2O + O2) are occurring at the same rate, resulting in no net change in the concentration of H2O2. However, molecules of H2O and O2 are still being consumed and produced as they are involved in the reaction, but their concentrations are not changing because they are being replenished at the same rate that they are being consumed.

Therefore, the correct answer is B i.e Molecules of H2O2 have stopped forming.

To learn about redox reactions click:

https://brainly.com/question/13293425

#SPJ3

I need help with science and I need a 4-10 sentences on this:

Explain what makes the offspring of a living thing resemble its parent.

Answers

The reason that offspring look like there parents is because of genetics. The offspring receives 50% of each of their parent’s genes. Which creates a offspring that is a combination of both of their parent’s genes. Because of this they can resemble both parents, since they have genes from both of them. Showing that genetics is the reason why an offspring looks like it’s parent.

I need help with science o.o:

Question 1:

An egg yolk is unicellular.

True
False
___________________________

Question 2:

Your body has more than a billion cells.

True
False
_____________________


Question 3:


Almost all cells are not microscopic.

True
False

please dont steal my points :>

Answers

Answer:

TrueTrueFalse

Explanation:

this is the answer

Answer:

1.true

2true

3.false

Explanation:

espero que te ayude

PLZZZ HELP!!! 80PTS!!!
You are given a toy car and told it has a density of 0.54 g/mL and a volume of 38.2 mL. Calculate impulse, given that the toy car's acceleration is 10 m/s^2 and time is 10 s. WRITE THE NUMBER ONLY and DO NOT ROUND.

Answers

Answer:

Impulse = [tex]206.28 * 10 = 2062.8[/tex] g.m/s

Explanation:

Impulse is equal to the product of force and time

Here

Density of car =  [tex]0.54[/tex]  g/mL

Volume of car [tex]= 38.2[/tex] mL

Mass of the car is equal to the product of density and volume of car

Mass of the car [tex]= 0.54 * 38.2[/tex] [tex]= 20.628[/tex] grams

Acceleration of the car is [tex]10[/tex] m/s^2

Force is equal to product of mass and acceleration

F = [tex]20.628 * 10 = 206.28[/tex] g .m/s^2

Impulse = F * t

Impulse = [tex]206.28 * 10 = 2062.8[/tex] g.m/s

Which of the following involves an endothermic reaction

Answers

Answer:

A

Explanation:

Photosynthesis requires energy to drive the chemical reaction. Photosynthesis is an endothermic reaction. This means it cannot occur without energy (from the Sun).

describe the relationship of the atoms shown above
choices:

Answers

Answer:

I don't know.

What two things can change when an object accelerates?​

Answers

Answer:

speed and velocity or direction.

is this correct and why​

Answers

Answer:

correct ooooooooooooo

How much resistance is required to limit the current from a 12 V battery to 3.6 mA?

Answers

Answer:

3333.3 ohm

Explanation:

V=IR so R =V/I (in Ampere) so convert 3.6 mA to 3.6*10^-3 A

so R =12/3.6*10^-3 =3333.3

Check out this app! It's millions of students helping each other get through their schoolwork. https://brainly.app.link/qpzV02MawO​

Answers

Answer:

OK we appreciate your concern.

A sinusoidal wave is reflected at the surface of a medium whose properties are such that half the incident energy is absorbed. Consider the field that results from the superposition of the incident and the reflected wave. An observer stationed somewhere in this field finds the local electric field oscillating with a certain amplitude E. What is the ratio of the largest such amplitude noted by an observer to the smallest amplitude noted by any observer

Answers

Answer:

[tex]\frac{Ei + Er}{Ei-Er}[/tex]

Explanation:

Ratio of the largest amplitude to the smallest amplitude is called voltage standing wave ratio ( along a transmission line )

Determine the ratio of the largest such amplitude noted by an observer tot the smallest amplitude

Expression for VSWR

VSWR =  [tex]\frac{1 + \sqrt{\frac{Pr}{Pi} } }{1 - \sqrt{\frac{Pr}{Pi} } }[/tex]    where ; Pr = reflected power , Pi = Incident power

hence the ratio of the largest amplitude to the smallest amplitude

= [tex]\frac{Emax}{Emin}[/tex] = [tex]\frac{Ei + Er}{Ei-Er}[/tex]  where ; Ei = amplitude of incident wave, Er = amplitude of reflected wave

Why is the answer (A)?
In details please​

Answers

Explanation:

resistance of wire can be determined by this equation

R = Rho . L / A

L = the length of wire

A = the Area, A = πr²

Rho = density of resictance

we can do some rational

R1/R2 = ( Rho L1/A1) / (Rho L2/A2)

L2 is the condition when the length is doubled and

L2 = 2 x L

A2 is the condition when the diameter is doubled

A2 = 4A1

R/R2 = (L1/A1)/(L2/A2)

R/R2 = (L/A) / (2L/4A)

R/R2 = 1 / ½

R2 = ½ R.

then we use formula of Voltage

V = I R

1st condition

V = 0.3 R

2nd condition ( V is constant)

V = I2 R2

0.3 R = I2 x ½R

i2 = 0.3/ ½

i2 = 0.6 Ampere

Background information:
We know that power is the rate that work is done; what that
really means is that power tells up how much work is done every
second. To calculate power we just divide the amount of work that
was done by the time it took to do it (Power=work/time). Work is
measured in Joules and time is measured in seconds, we end up with Joules/sec when we calculate power. A Joule/sec is a Watt; we’ll use Watts to measure and compare power.
We also know that the work done on an object is the amount of energy it has gained. For this activity, you’ll be raising your body up as you do pushups which means you’ll be giving your body gravitational potential energy (GPE). To calculate the amount of GPE we multiply mass time gravity times the height raised (GPE=mgh).
What to do (record everything in the table):
1. You need to have a decent estimate of your mass in kilograms: On earth, every
kilogram weighs 2.2 pounds. Either measure your weight on a scale or just
estimate it (in pounds) then divide by 2.2 to get your mass in kilograms.
2. Measure or estimate the length of your upper arm from your elbow to your
shoulder in centimeters...this is how high you raise yourself for every pushup.
3. Decide if you’ll do regular pushups (on your toes) or simpler pushups (knees). If
you are doing regular pushups, multiply your mass by 0.68 because you’ll only be lifting about 68% of your mass each time; if you’re doing simpler pushups, multiply your mass by 0.52 because you’ll only be lifting about 52% of your mass each time.
4. Measure the time it takes for you to do 10 pushups.

Answers

Answer:

Power is the rate at which work is done. It is the work/time ratio. Mathematically, it is computed using the following equation. The standard metric unit of power is the Watt.

Explanation:

A thermionic tube with only a cathode and an anode is called?​

Answers

A vacuum tube consists of cathode (also called as filament), anode (also called as plate), and electrode (also called as grid). Cathode is an electron emitter that emits the free electrons whereas anode is an electron collector that collects the free electrons.
I hope this helps.
The correct answer is diode.

A submarine is 309 m horizontally from the shore of a freshwater lake and 105 m beneath the surface of the water. A laser beam is sent from the submarine so that the beam strikes the surface of the water 227 m from the shore. A building stands on the shore, and the laser beam hits a target at the top of the building. The goal is to find the height of the target above sea level.

Required:
a. Draw a diagram of the situation, Identifying the two triangles that are important in finding the solution.
b. Find the angle of incidence of the beam striking the water-air interface.
c. Find the angle of refraction.
d. What angle does the refracted beam make with the horizontal?
e. Find the height of the target above sea level.

Answers

Answer:

Explanation:

a) See the attached file for diagram . The two triangles are ABC and DEC .

b )

Angle of incidence = i

Tan i = ( 309 - 227 ) / 105

= 82 / 105 = .78

i = 38°

c )

Sin i / sinr = 1 / μ where μ is refractive index of water .

Sin i / sinr = 1 / μ = 1 / 1.33

sin 38 / sinr = .7518

.6156 / sinr = .7518

sinr = .6156 / .7518

.819

r = 55°

d )

angle  the refracted beam makes with the horizontal = 90 - 55 = 35°

e )

h / 227 = Tan 35

h = 227 x Tan 35

= 159 m

Height required = 159 m .

Why are some areas in Europe seeing a partial solar eclipse while others are observing a total solar eclipse?

plz answer ASAP

Answers

Answer:

Objects between the source and observer produce possible shadows known as the umbra and the penumbra.

The umbra is a totally shadowed area, no light travels directly from the source to the observer.

The penumbra is a partially shadowed are where some of the source light travels directly to the observer an some of the source light is blocked from the observer (the object blocking the light is not a point object).

The question apparently refers to the differences seen by the observers.

Need this homework for today so help 50 point

Answers

Number one- the pendelum slowly reduces energy and eventually loses everything and will stand still.
Number two- I can account due to the factor of it repeating the same result

A town requiring 2.0 m3/s of drinking water has two sources, a local well with 15 g/m3 nitrate (as N) and a distant reservoir with 5 g/m3 nitrate (as N). What flow rates of well and reservoir water are needed to meet the EPA drinking water standard and minimize the use of more expensive reservoir water

Answers

Explanation:

Drinking water requirement in town 2.0 m^3/s of water per second

nitrate in local well  nitrate per 15 [tex]\mathrm{m}^{3}[/tex] of water

nitrate in distant reservoir [tex]=5 \mathrm{~g} / \mathrm{m}^{3}[/tex]

Let the flow rate of well

flow rate of reservoir [tex]=y m^{3} / s[/tex]

Drinking water requirement is [tex]45 \mathrm{ppm}[/tex] or [tex]45 \mathrm{~g} / \mathrm{m}^{3}[/tex]

therefore, the total flow of drinking water

 

If the delay of the 10-bit adder is 1ns, the setup time, the hold time, and the propagation delay of the registers is 0.3 ns, 0.1 ns, and 0.2 ns, respectively. The minimum cycle time is ns_____.

Answers

Answer:

1.6 ns

Explanation:

Given data :

delay in 10-bit adder = 1ns

setup time = 0.3 ns

hold time = 0.1 ns

propagation delay = 0.2 ns

calculate the minimum cycle time

∑ delay + setup time + hold time + propagation delay

= 1 + 0.3 + 0.1 + 0.2

= 1.6 ns

Need help ASAP on number 4 pls

Answers

The Arrows on both sides that has equal length is wrong and the rest of the boxes are the correct

A car's bumper is designed to withstand a 7.20 km/h (2.0 m/s) collision with an immovable object without damage to the body of the car. The bumper cushions the shock by absorbing the force over a distance. Calculate the magnitude of the average force (in N) on a bumper that collapses 0.195 m while bringing a 830 kg car to rest from an initial speed of 2.0 m/s.

Answers

Answer:

8512 N

Explanation:

From the work energy theorem we know that: The net work done on a particle equals the change in the particles kinetic energy:

[tex]W=\Delta K=K_{f}-K_{i} \\ \\qquad \begin{array}{r} W=F \cdot d, \Delta K=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2} \\ F \cdot d=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2}[/tex]

Where:

-W is the work done by the force.

- F is the force actin on the.

- d is the distance travelled.

- m is the mass of the car.

- [tex]v_{f}, v_{i}[/tex] are the final and the initial velocity of the car

[tex]K_{f}, K_{i}[/tex] are the final and the kinetic energy of the car.

Givens: [tex]m=830 \mathrm{~kg}, v_{i}=2 \mathrm{~m} / \mathrm{s}, v_{f}=0 \mathrm{~km} / \mathrm{h}, d=0.195 \mathrm{~m}[/tex]

Plugging known information to get:

[tex]F \cdot d &=\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2} \\ F &=\frac{\frac{1}{2} m v_{f}^{2}-\frac{1}{2} m v_{i}^{2}}{d} \\ &=\frac{0-\frac{1}{2} \times 830 \times 2^{2}}{0.195} \\ &=8.512 \times 10^{3} \\ F &=8.512 \times 10^{3} \mathrm{~N}[/tex]

What is the legal BAC for teens in the state of California?

Answers

Underage drivers (motorists who are under the age of 21) who operate a vehicle while “under the influence” or with a blood alcohol concentration (BAC) of . 08% or higher can be charged with a “standard” DUI and generally face the same penalties as drivers who are at least 21 years old.

a mid-oceanic might be compared to what continental landform

Answers

Answer:

mountain range:)

Explanation:

The diagram below shows the beaks of five species of birds that developed over time from
one parent species. The five species of birds can be found living in the different areas. Which
of the following BEST explains why the beak shape of each species of bird developed
differently? * 5
(1 Point)
A. Birds in different areas were able to make different birdcalls and songs.
O
B. Birds in different areas were exposed to different food sources.
C. Birds in different areas had different materials to make nests.
o o
D. Birds in different areas had different predators to defend or hide from.

Answers

Answer:

Birds in different areas were exposed to different food sources.

Explanation:Im almost 100 percent this is it.

Answer:

the answer is B

Explanation:

i did test on preformance

I need help! thank you

Answers

Answer:

it is coice A and choice D

Select the correct answer.
Which theory was first proposed by Albert Einstein?
OA. the theory of special relativity
O B. the theory of universal gravitation
c. the theory of inertia
OD. the theory of radioactivity

Answers

Answer:

A. the theory of special relativity.

Explanation:

The theory of special relativity was first proposed theory by Albert Einstein.

Hope it will help :)❤

A the special of relativity
Other Questions
18 POINTS Which of the following is a complex-compound sentence?As much as they complain, sometimes they admit that I have a point, and it can be quicker to call than to text back andforth several times.O My friends roll their eyes at me, and some of them won't answer their phones.O A lot of people are uncomfortable making phone calls, but I think they are more efficient.O Although it is considered old-fashioned, I prefer phone calls to text or email. Preamble is an extract of Indian constitution explain What was the purpose of the Puritans settling the New England colonies? a. to stabilize the immigrants traveling to the United States to oben the law established by the King of Engiand c. to practice their religion freely d. to aid other Puritans HELP MEEEEEE Write a problem you could represent with the equation 3k - 12 = 6 . Solve the equation and show your solution . Please help me, I will mark as brainliest. A human disease termed cardioencephalomyopathy results from a genetic change in the normal function of mitochondria. Babies who are born with the disease generally die from it. Scientists who study this disease using a bacterium known as Paracoccus denitrificans. Scientists were able to produce the same change in the bacteriums genes that they found in the mitochondria of their human patients. What is the BEST explanation for why scientists can use a bacterium to study this human disease? A Bacterial genes are very similar in structure to human genes. B Bacteria can be used as a model to study more complex cells. C The genes and chemical pathways found in bacteria are similar to those in human mitochondria. D The eukaryotic cells of humans share many characteristics with bacterial cells, including single stranded DNA. Calculate the slope of the line that contains the points (-2, -4) and (2, 4). Last year Rikki sang 960 songs with his rock band. How many songs did he sing per month? How did you get your answer? As it relates to the information in the article, what does With a Few Flat Tires Along the Wayin the title suggest? Let A = the sum of all 2-digit positive perfect squares. Let B= the sum of all 2-digit positive perfect cubes. Find A B. A traveler is walking on a moving walkway in a n airport. The traveler must walk back on the walkway to get a bag he forgot. The traveler's ground speed is 2 ft/s against the walkway and 8 ft/s with the walkway. What is the traveler's speed off the walkway? What is the speed of the moving walkway? What's the name of angle C thanks for the help :) cual es el valor de x en x4 = -8 20 POINTSThe origins of folk ballads are, for the most part _____.unknownknown Chang knows one side of a triangle is 13 cm. Which set of two sides is possible for the lengths of the other twosides of this triangle?5 cm and 8 cmD cm and 7 cmO7 cm and 2 cm8 cm and 9 cmHurry Cherry Hill Orchards produced 500 tons of cherries during their first year of business, 2012. Since then, the cherry harvest continues to increase in production by 5.7% over the previous year. Write an exponential function f(x) that models the tons of cherries produced by cherry hill orchards x years after 2012A. f(x) = 500(1.057)^xB. f(x) = 50(1.057)^xC. f(x) = 500(0.057)^xD. f(x) = 500(1.57)^x Are the Triangle similar? Why or why not? This was purchased last year add a question tag Please explain! What is the solution for the inequality below:12- x CAN SOMEONE PLEASE HELP ME SOLVE THIS!? ASAP PLEASE!!Find the area of the figure. Round to the nearest hundredth.