how much concentrated solution would it take to prepare 2.65 l of 0.515 m hcl upon dilution with water?

Answers

Answer 1

Concentrated solution that it would take to prepare 2.65 l of 0.515 m Hcl upon dilution with water is 131 ml.

What is concentrated solution?

A solution  that has a relatively large amount of dissolved solute is known a concentrated solution .

As we know,

And , moles of hydrochloric acid =  M₁ * V₁= M₂ * V₂

Now, V₁ =   V₂ * M₂/M₁

Given,

M₂ = 0.515 M

V₂ =2.65 L

As the hydrochloric acid can be concentrated up to 38% p/V ,

Therefore, maximum M₁ =38% p/V = 38 gr/ 0.1 L / 36.5 gr/mol = 10.41 M

Now, min V₁ =   V₂ * M₂/ max M₁

=  2.65 L* 0.515 M/ 10.41 M

= 0.131 L

= 131 ml

So, the quantity required can go from 131 ml up to 2900 ml ( if M₁ = M₂)

To know more about concentrated solution, refer

https://brainly.com/question/17206790

#SPJ4


Related Questions

Select all that apply
What two things are credited with creating the "global village?" (Choose every correct answer.)
Electronic media
Corporate sustainability
Convenient air travel
Assembly line production

Answers

The two things that are credited with creating a global village is: Convenient air travel and Electronic media.

What is a Global Village?This can be described as a method where people from the globe or universe are able to communicate and meet each other sometimes without physical contact.For an effective global village to be created, a good electronic media needs to be present. It will help people of all kinds communicate easily. A convenient air travel system also needs to be present for ease of movement.Herbert Marshall Mcluhan is a canadian philosopher, he predicted the world wide wide when he said nearly 60 years ago that the rise of electronic media would initiate a global village, reducing distance barriers. He also stated that the medium of communication is the message itself. This statement gave rise to the world wide web thirty years later and is the cornerstones of media theory and technologies.

To learn more about Global Village here:

brainly.com/question/18920282

#SPJ4

Should the EPA grant the permit to raise fish off of the coast?

Answers

No, EPA should not  grant the permit to raise fish off of the coast.

What is EPA rule?

EPA full form is Environmental Protection Agency. To safeguard beaches, the EPA collaborates with states, tribes, territories, local governments, and the general public.

The EPA enforces various rules that restrict water pollution sources to our coastal beaches and ocean water.

(i) the Clean Water Act; 

(ii) the Clean Boating Act; and 

(iii) the Oil Pollution Act.

The EPA broadened its efforts to enhance the quality of coastal recreation waters and safeguard beach goers' health.

So, EPA should not grant the permit to raise fish off of the coast.

To know more about EPA refer to:

https://brainly.com/question/14956213

#SPJ1

F2 + 2NaCl --> 2NaF + Cl2 (g)


7.6 g of F2 completely reacts with 23.2 g NaCl to produce 14.0 g of Cl2 (g). What mass in grams of NaF is produced?

Answers

The mass of NaF that will be produced when 7.6 g of [tex]F_2[/tex]  completely reacts with 23.2 g NaCl to produce 14.0 g of [tex]Cl_2[/tex] gas would be 16.80 grams.

Stoichiometric problem

From the balanced equation of the reaction between [tex]F_2[/tex] and NaCl below:

[tex]F_2 + 2NaCl -- > 2NaF + Cl_2 (g)[/tex]

The mole ratio of the 2 reactants is 1:2. We need to find the limiting reactant.

Recall that: mole = mass/molar mass

Molar mass of [tex]F_2[/tex] = 38 g/mol

Molar mass of NaCl = 58.44 g/mol

Mole of 7.6 g [tex]F_2[/tex] = 7.6/38 = 0.2 mol

Mole of 23.2 g NaCl = 23.2/58.44 = 0.40 mol

From the calculated moles, there is no excess reactant.

The mole ratio of NaCl to NaF is 1:1. Hence, the equivalent mole of NaF produced will also be 0.40 mol.

The molar mass of NaF is 41.99 g/mol.

Mass of 0.40 g NaF = 0.40 x 41.99

                                 = 16.80 grams

In other words, the amount of NaF that will be produced when 7.6 g of [tex]F_2[/tex]  completely reacts with 23.2 g NaCl to produce 14.0 g of [tex]Cl_2[/tex] gas would be 16.80 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

if on an average a teflon polymer has 100,000 monomer units and each monomer of teflon has the formula c2f4, what is the molar mass of the polymer?

Answers

Molar mass of teflon polymer is 1,20,00,000. if on an average a teflon polymer has 100,000 monomer units and each monomer of teflon has the formula c2f4 =120.0g/mol.

How to solve?

no of monomer in teflon polymer is  100,000 monomer units ,

and  the formula of teflon is c2f4,

now the molar mass of monomer c2f4 is 100.02 g/mol then,

for  100,000 monomer units = 120.0*100,000 = 1,20,00,000 g/mol

Molar mass of teflon polymer is 1,20,00,000 g/mol.

What does C8 do to Teflon?

The two that have received the attention are PFOA (also known as C8), which has been used for many years to manufacture Teflon non-stick, and PFOS, which is used to make Scotchgard water repellent. They don't degrade. PFAS are persistent and build up over time in both people and animals as well as in the environment.

Give a definition of polymerization and an equation.

The joining of hundreds of ethylene molecules to produce polyethylene is an illustration of the first type of reaction. Other addition polymers include polypropylene, which is created by polymerizing H2C=CHCH3, polystyrene, which is created from H2C=CH C6H5, and polyvinyl chloride, which is created from H2C=CHCl.

Learn more about PVC here:

https://brainly.com/question/26288847

#SPJ4

The pace huttle orbiter utilize the oxidation of methyl hydrazine by dinitrogen tetroxide for propulion. 4 N2H3CH3(l) 5 N2O4(l) 12 H2O(g) 9 N2(g) 4 CO2(g)

Calculate ΔH° for thi reaction

Answers

The reaction's electron gain enthalopy is ΔH = -5591 kJ/ mol.(approximately)

What, using an example, is electron gain enthalpy?

An illustration of electron gain enthalpy ,As a result, an element's second electron gain entropy is positive. For instance, energy is released whenever an electron is attached to a sulfur atom to create an S- ion, whereas energy is needed whenever an electron is attached to an S- ion to create an S2- ion.

Briefing:

5N2O4 (l) + 4N2H3CH3 (l) ⇒ 12H2O (g) + 9N2 (g) + 4CO2 (g)

First, sketch the remaining product structures so that you can see the bonds. You ought to purchase the following:

H2O: H-O-H (pretend it's bent)

N2: N≡N

CO2: O=C=O

Step two is to research the average bond strengths of each component (reactants/productsbonds. )'s

Reactants:

N-N: 160 kJ/mol

N=O: 607 kJ/mol

N-O: 210 kJ/mol

N-H: 391 kJ/mol

C-N: 305 kJ/mol

C-H: 413 kJ/mol

Products:

O-H: 467 kJ/mol

N≡N: 941 kJ/mol

C=O: 799 kJ/mol (use the value with * since the bond is in CO2)

Step three is to count the quantity of each type of bond present in the reactants and products. The total bond strengths for every type of bond can then be determined by multiplying those values by the numbers in the balanced chemical equation above.

(For example, since the reactants include a total of nine N-N bonds—five from N2O4 and four from N2H3CH3—you multiply the covalent bond for N-N by nine, or nine times 160, to obtain a total of 1440 KJ/mol.)

Reactants:

N-N: 9*(160)= 1440 kJ/mol

N=O: 10*(607)= 6070 kJ/mol

N-O: 10*(210)= 2100 kJ/mol

N-H: 12*(391)= 4692 kJ/mol

C-N: 4*(305)= 1220 kJ/mol

C-H: 12*(413)= 4956 kJ/mol

Products:

O-H: 24*(467)= 11208 kJ/mol

N≡N: 9*(941)= 8469 kJ/mol

C=O: 8*(799)= 6392 kJ/mol

NOTE: In the balancing equation, I increased the binding energy for the two O-H bonds even by 12 H2O to get 24* for molecules like H2O. (467).

Add all the numbers for the reactants and the products respectively, in step four.

Reactants:

1440+6070+2100+4692+1220+4956= 20478 kJ/mol

Products:

11208+8469+6392= 26069 kJ/mol

In order to find ΔH in step five, remove the bond strengths for the product from the reactants.

ΔH= 20478 - 26069= -5591 kJ/ mol of rxn

To know more about electron gain enthalopy visit :

https://brainly.com/question/28391213

#SPJ4

Substance D has the following properties:

ΔHvap = 34.6 kJ/mol

ΔHfus = 6.3 kJ/mol

Tb = 87.9 °C

Tm = -30.9 °C

Specific Heat (solid) = 4.9 J/g·°C

Specific Heat (liquid) = 2.4 J/g·°C

Specific Heat (gas) = 1.5 J/g·°C

Calculate the energy that must be removed to convert 221.6 g of substance D from a gas at 120.9 °C to a solid at -61.9°C. The molar mass of Substance D is 75 g/mol. Enter your response to the nearest kJ

Answers

The total heat that is required to produce the solid  is obtained as 34.8 kJ.

What is the energy required?

We know that the energy of the substance can be defined as the ability to do work. In this case, energy has been supplied to the system as the heat that is supplied to the substances.

There are stages that the objects would have to go through and in all these stages we have heat that is evolved or absorbed.

As the object cools from  120.9 °C to  87.9 °C

H = mcdT

m = mass of the object

c = specific heat capacity

dT = temperature change

H = 221.6 g *  1.5 J/g·°C * (87.9 °C - 120.9 °C)

H = -10,969 J or 10.969 kJ

As it is converted from gas to liquid;

H = 221.6 g/75 g/mol * 34.6 kJ/mol

H = 2.95 mol *  34.6 kJ/mol

H = 102.1 kJ

As the liquid cools from 87.9 °C to  -30.9 °C

H = 221.6 g * 2.4 J/g·°C * ( -30.9 °C - 87.9 °C)

H = -63.2 kJ

As the liquid changes to solid;

H =  221.6 g/75 g/mol * 6.3 kJ/mol

H = 2.95 mol * 6.3 kJ/mol

H = 18.6 kJ

As the solid cools further to  -61.9°C

H = 221.6 g * 4.9 J/g·°C * (-61.9°C - (-30.9 °C))

H = -33.7 kJ

Total heat involved;

10.969 kJ + 102.1 kJ - 63.2 kJ + 18.6 kJ - 33.7 kJ

= 34.8 kJ

Learn more about heat:https://brainly.com/question/28302909

#SPJ1

Write the balanced COMPLETE
ionic equation for the reaction
when aluminum nitrate and sodium
hydroxide are mixed in aqueous
solution. If no reaction occurs,
simply write only NR. Be sure to
include the proper phases for all
species within the reaction.

Answers

Answer: Al(NO3)3 + 3NaOH ==> Al(OH)3 + 3NaNO3

Explanation:

NH₄NO₃ + NaOH ---> AlOH3 + 3NaNO3

Al(NO3)3 + 3NaOH ==> Al(OH)3 + 3NaNO3

Aluminium Nitrate + Sodium Hydroxide ----> Aluminium Hydroxide + Sodium  Nitrate

Which of the following equations shows a physical change? (1 point)
O CaCOg →) CaO + CO,
O N₂O5NO₂ + O₂
O H₂O(s)→ H₂O(l)
O C12H22O11 + 1202 12CO₂ + 11H₂O
(I need this now lol)

Answers

Atoms of hydrogen are then balanced. Watch the following video to learn more about oxygen atoms. C12H22O11 with 12O2 equals 12CO2 plus 11H2O.

How to find Balance  equations ?

Balance C12H22O11 + O2 CO2 + H2O

Word formula: Sucrose + Oxygen + Carbon + WaterIt is a combustion reaction, which is the type of chemical reaction involved.Strategies for Keeping Things Balanced: In these reactions, oxygen is being added along with sucrose, which is often known as table sugar. We were burning sugar, in other terms. As a result, this is an instance of combustion.First, adjust the coefficient in front of the CO2 molecule to balance the carbons. You may now begin balancing this equation using that information.As the coefficient for CO2, you should use 12.Atoms of hydrogen are then balanced. Watch the following video to learn more about oxygen atoms.C12H22O11 with 12O2 equals 12CO2 plus 11H2O.

To Learn more About Atoms of hydrogen refer to:

https://brainly.com/question/20290989

#SPJ1

Why can gae change volume?A. The ga particle have no ma, o they can change volume. B. Gravity ha no effect on ga particle, o they can float away. C. There are no force holding the ga particle together. D. The force holding the ga particle together are tronger than gravity

Answers

The gases changes its volume because there are no force holding the gas molecules together. Hence the option C is correct.

Gases do not have a definite shape or volume because the molecules in the gases are very loosely packed, they have large intermolecular spaces , hence they move around. The force of attraction between the molecules is also very less, as a result gases acquire any shape or any volume. In comparison to liquids and solids, intermolecular interactions between gas particle are weaker. Because the atoms in gases are loosely connected to one another, they can move more quickly than those in liquids. Thus, gases lack both a defined shape and a defined volume. They merely assume a container-like shape.

So,  gas molecules can break loose easily from any boundary and can fill  any space. Hence, they do not contain any definite volume.

To know more about properties of gases, please refer:

https://brainly.com/question/6140407

#SPJ4

HELP PLS

The half-life of sodium-25 is 1.0 minute. Starting with 1 kg of this isotope, how much will remain after half an hour?

Answers

The amount of the sodium-25 that will remain after half an hour, given that it has a half life of 1.0 minutes is 5.0×10⁻³¹ Kg

How do I determine the amoun remaining after half hour?

To obtain the amount that will remain after half hour, we'll begin by obtaining the number of half lives that has passed. Details below:  

Half-life (t½) = 1.0 minuteTime (t) = 1/2 hour = 30 minutesNumber of half-lives (n) =?

n = t / t½

n = 30 / 1

n = 30

Now, we shall determine the amount that will remain after half hour. This is shown below:

Number of half-lives (n) = 30Original amount (N₀) = 1  KgAmount remaining (N) = ?

N = N₀ / 2ⁿ

N = 1 / 2³⁰

N = 5.0×10⁻³¹ Kg

Thus, from the above calculation, we can conclude that the amount that would remain is 5.0×10⁻³¹ Kg

Learn more about amount remaining:

https://brainly.com/question/28440920

#SPJ1

write the ka reaction for trichloroacetic acid, cl3cco2h (ka 5 0.3), for anilinium ion, and for cu21 (ka 5 3 3 1028)

Answers

Ka = [Cl3CCOO⁻] [H⁺] / [Cl3CCOOH] = 0.3

Ka = [C6H5 -NH2] [H30⁺] / [C6H5-NH3⁺] = 2.51ₓ10⁻⁵

Ka = [Cu (OH3)] ⁻[H⁺] ³/[Cu²⁺] = 3ₓ10⁻⁸

To know if a substance will act as an acid or a base in a reaction, we look at the functional group.

How to find acidic strength?

trichloroacetic acid (and carboxylic acids in general) have carboxylic group - O- H which dissociates into aqueous solution into COO⁻ + H+ ions. Since it gives protons in aqueous solution, it acts as an acid

Amines Ar -NH are bases. They react with water to produce hydroxide ions.

Protonated amine is the conjugate acid. It reacts with water to provide

Cu2+ reacts with water to provide protons. Hence, Cu2+ acts as an acid.

Among trichloroacetic acid, anilinium ion and Cu2+ ion, Ka value is maximum for trichloroacetic acid. Hence, trichloroacetic acid is the strongest acid.

Note: Higher is the Ka value, greater is the acid strength.

For more information about acidic strength please visit:

https://brainly.in/question/2426352

#SPJ4

Determine the concentration of a solution prepared by diluting 20. 0 mL of a 0. 200 M CSOH to a final volume of 250. 0 mL.

(CsOH = 149. 92 g/mol)

a) 0. 00800 M

b) 0. 0320 M

c) 1. 25 M

d) 0. 0160 M

e) 0. 160M

Answers

The concentration of solution is 0.0160M.

Option d) is correct

What is dilution equation?

When we dilute a solution by increasing the volume so as to decrease the molarity of the substance. By using this we can find the concentration.

M₁V₁=M₂V₂

M1 = initial molarity =0.200M

M2= Final molarity =M2

V1= Initial volume= 20mL

V2= Final volume = 250mL

Using this equation

0.200×20/1000 = M2×250/1000

⇒M2 = 0.400/ 25 = 0.0160M

For more information about dilution equation please visit:

https://brainly.com/question/29715909

#SPJ4

true or false; water is not commonly used on combustible metals as it may react violently, especially with magnesium and sodium, causing explosions.

Answers

Answer: false

Explanation: Sodium reacts vigorously with cold water forming sodium hydroxide (NaOH) and hydrogen (H2). The reaction of sodium metal with water is highly heat producing due to which the hydrogen gas formed during the reaction catches fire and burns causing little explosions.

Magnesium metal does not react explosively with water…. Unlike the LOWER Group 2 metals, i.e. calcium, strontium, etc., the reaction of magnesium with water is rather sluggish… formation of magnesium oxide passivates (as it is called) the surface of the metal and prevents rapid oxidation…

if your chemistry grade is broken down so that 40% of it is based on homework, 40% on lab reports, and 20% on exams, and your average scores (out of 100 points in each area) are homework–95, labs–83, and exams–77, what would your weighted average be?

Answers

95 marks in 100 means you scored 95 % in homework.  Similarly 83% in labs and 77% in exams. Thus the weighted average will be 85 %.

What is average?

Average of a set of values is their sum divided by their number. The average of a set with even number of values, will be their sum divided by number where the average comes in a range of the set of values.

Average of odd number of values will be the exact middle value of the set.

Given that marks in homework out of 100 = 95

labs = 83

exams = 77.

Thus, average of your marks percentage = (77 + 83 + 95)/3

                                                                     = 85%.

Therefore, the average percentage of the marks is 85%.

To find more on average, refer here:

https://brainly.com/question/27851466

#SPJ1

. calculate the emission wavelength (nm) of excited atoms that lie 3.371 1019 j per molecule above the ground state.

Answers

The emission wavelength (nm) of excited atoms are −54.44 eV.

The equation E=hc can be used to determine the emission line's wavelength. The energy difference between the excited state and ground level is indicated here by the symbols E, h, c, and.

How much energy is required to reach the first excited state from the ground state?

An atom's ground state and excited state differ in energy by a factor of 31019 J.

How is the excited state determined?

Atoms that resemble hydrogen, i.e. The energy levels for H, He+, Li2+, etc. are provided by:

En=Z2 = 13:61 eVn2. where n is the quantum level and Z is the atomic number.

E2=−22⋅13.61 eV22. =−13.61 eV.

E1=−22⋅13.61 eV12. =−54.44 eV.

To know more about wavelength visit:-

https://brainly.com/question/12924624

#SPJ4

Which of the following samples of gas would have a new volume of 2.00 liters if the pressure is decreased from 4.00 atm to
2.00 atm at constant temperature?
6.00 L
8.00 L
4.00 L
1.00 L

Answers

Answer: 1.00 L

Explanation: Pressure and Volume are inversely proportionate. The volume increases at a factor of 2, from 1.00 L to 2.00 L. This means the pressure would decrease by a factor of 2, from 4.00 atm to 2.00 atm. Think about it, if you had a box and it doubled in the space, the same amount of gas is still in the container and the pressure would be half as much as these gas particles would have half the amount of collisions against the walls

if 93.75% of a radioactive isotope of technetium-99 remains after 24 hours, what is the half-life?

Answers

93.75 % of the Tc sample is remaining after 24 hours. The half life of the Tc is thus, 266 hours or 11 days.

What is half life?

Half life of a radioactive material is the time taken to decay its half amount. The decay constant k is related to the half life by the expression:

k = 0.693/ t1/2.

Radioactive decay is a first order reaction. Let N0 be the initial amount and Nt be the final amount and t be the time for decay, then,

k = 1/t ln (N0/Nt)

Given Nt = 93.75 %

N0 = 100%.

t = 24 hr.

K = ln (93.75 / 24 hr)/ 24 hr.

   = 0.0026 hr⁻¹.

Now the half life t1/2 = 0.693 / 0.0026 hr⁻¹

                                  = 266 hr = 11 days.

Therefore, the half life of the technetium sample is 11 days.

To find more on half life, refer here:

https://brainly.com/question/16387602

#SPJ1

the difference between the atomic number of an element and the element’s atomic mass is the number of:_____.

Answers

The difference between the atomic number and the mass number is atomic number is the total number of protons of an element, and atomic mass is the total number of neutrons and protons.

What are the atomic mass and number?

The nuclear charge number of an element is its atomic number. The total number of protons in the element's atoms serves as a representation of it.

The mass number of an element is often referred to as its atomic mass number and nucleon number. The mass numbers are the sum of the protons and neutrons.

The mass in protons and neutrons of an atom is expressed as a mass number, also referred to as an atomic mass unit. The atomic mass is the sum of the masses of all isotopes of a certain kind.

As a result, the atomic number of an element represents the total number of protons present, whereas the total number of neutrons and protons is represented by the atomic mass

To learn more about the atomic number and atomic mass, refer to the link:

brainly.com/question/14190064

#SPJ4

A 0. 307-g sample of an unknown triprotic acid is titrated to the third equivalence point using 35. 2 ml of 0. 106 m naoh. Calculate the molar mass of the acid.

Answers

Based on the nature of the acid as a triptotic acid, the molar mass of the acid is 247 g/mol.

What is a triprotic acid?

A triprotic acid is an acid which produces three moles of protons when dissolved in water.

The equation of the reaction at equivalence can be shown as follows;

H₃X + 3 NaOH ⇒ Na₃X + 3 H₃O

where X is the counter ion of the triprotic acid.

The ratio between the reacted acid and base at the third equivalence point = 1:3

The moles of substance reacted is calculated with the formula given below:

moles of substance reacted = molarity * volume

moles of NaOH reacted =  0.106M * 0.0352L = 0.003731 mole.

Thus, moles of H₃X reacted = 0.003731 moles /3

moles of H₃X reacted = 0.001244mole.

The molar mass of the acid can be calculated using the formula below:

molar mass =  mass /moles

molar mass of the acid = 0.307g / 0.001244mole

molar mass of acid = 247 g/mol

Therefore, the molar mass of the acid is 247 g/mol.

Learn more about molar mass click-

brainly.com/question/15476873

#SPJ4

The balanced combustion reaction for C6H6
is
2C6H6(l)+15O2(g)⟶12CO2(g)+6H2O(l)+6542 kJ


If 8.400 g C6H6
is burned and the heat produced from the burning is added to 5691 g
of water at 21 ∘
C, what is the final temperature of the water?

Answers

Final temperature is 30.3ºC

What is Temperature?

The term "temperature" refers to a measurement of an object's average kinetic energy, which is a category of energy linked to motion and used to describe how hot or cold an object is. But how hot and how frigid are they exactly? Hot and cool are not really scientific concepts. A physical scientist would check the metal's liquid state's temperature to find the answer. It is less confusing to use temperature instead of phrases like hot or cold.

The reaction's H is -6542 kJ as written. The heat produced by igniting 2 moles of C6H6(l) and producing 12 moles of CO2(g), for example, is represented by this.

We can determine moles of C6H6 combusted from the given mass of C6H6. We can then calculate the heat that would be produced based on that value. We can determine the change in water temperature after determining the amount of heat produced.

0.06785 moles are equal to 5.300 g C6H6 x 1 mol/78.11 g.

heat produced is equal to 221.9 kJ/0.06785 moles x 6542 kJ/2 moles.

q = mC∆T

(5.691 kg)(4.184 kJ/kg/deg)(T) = 221.9 kJ

T is equal to 221.9 kJ/(5.691 kg)(4.184 kJ/kg/deg).

T=9.3 degrees.

Final temperature equals 21° plus 9.3°, or 30.3°C

Learn more about Temperature from given link

brainly.com/question/24746268

#SPJ1

which represents a balanced equation of sulfurous acid with lithium hydroxide to form water and lithium sulfite.

Answers

The balanced chemical equation for the reaction of sulfurous acid with lithium hydroxide to form water and lithium sulfite is given as below.

2 LiOH + H₂SO₃ → Li₂SO₃ + 2H₂O

The formula of lithium hydroxide is given as LiOH

The formula of sulfurous acid is given as H₂SO₃

the formula of lithium sulfite is given as Li₂SO₃

The reaction will be:

LiOH + H₂SO₃ → Li₂SO₃

Let us balance the equation

In order to balance Lithium will put two against LiOH.

2 LiOH + H₂SO₃ → Li₂SO₃

Sulfur is already balanced.

To balance oxygen add water to deficient side.

2 LiOH + H₂SO₃ → Li₂SO₃ + 2H₂O

This above reaction is the balanced equation.

Learn more about balanced chemical reaction from the link given below.

https://brainly.com/question/28659858

#SPJ4

Select the correct answer from each drop-down menu. a molecule of chlorine has atoms of the same element, and a molecule of carbon dioxide has different kinds of atoms. based on this information, chlorine is and carbon dioxide is______ .

Answers

Chlorine is an element and carbon dioxide is a compound, this is the answer to the above question.

The matter is divided into categories using elements, compounds, and mixtures. Because all of the atoms in the simplest chemical compounds are the same size, they are referred to as elements. Compounds are made up of two or more elements that are chemically linked together in a certain sequence.

Elements, which are subcategories of atoms, may be defined by the same amount of protons. An element's atoms have the same number of protons, but its mass and number of neutrons may differ.

A compound is a substance that combines two or more distinct elemental kinds in a certain ratio of its atoms. During the process of fusion, some of the distinctive attributes of the constituent pieces are lost while the newly formed molecule picks up new traits. Compounds are represented using chemical formulae.

To know more about Chlorine visit:

https://brainly.com/question/14962130

#SPJ4

Answer:

Explanation:

chlorine is an element while carbon dyxoide is a compound

Rank the following atoms and ions from least to greatest ionization energy:



Ca2+ Ar Cl- S2-

Answers

Chlorine has the highest first ionization energy.

The ionization power is a degree of the capability of detail to enter into chemical reactions requiring ion formation or donation of electrons. it is also typically associated with the character of the chemical bonding inside the compounds fashioned by using the factors. See additionally binding power; electron affinity.

In physics and chemistry, ionization electricity, ionization power is the minimum strength required to remove the most loosely certain electron of an isolated gaseous atom, wonderful ion, or molecule.

On the periodic desk, first ionization strength commonly will increase as you circulate left to right throughout a length. that is because of increasing nuclear charge, which results in the outermost electron being greater strongly certain to the nucleus.

Learn more about ionization energy here:-https://brainly.com/question/13088843

#SPJ4

what are organelles explain

Answers

Answer:

I hope this helped

Explanation:

An organelle is a subcellular structure that has one or more specific jobs to perform in the cell, much like an organ does in the body. Among the more important cell organelles are the nuclei, which store genetic information; mitochondria, which produce chemical energy; and ribosomes, which assemble proteins.

Calculate the frequency of light emitted when an electron in a hydrogen atom makes each of the following transitions.
a) n = 4 →→ n = 3
b) n = 5 →→ n = 1
c) n = 5 →→ n = 4
d) n = 6 →→ n = 5

Answers

Consequently, v=hE=6. 61010 is the frequency of the light emitted.

How can you figure out the wavelength of light that a hydrogen atom emits during a transition?

The Rydberg Formula The Rydberg's Formula, 1=RZ2(1n2i1n2f), determines the wavelength of a photon absorbed by an electron transition. 1 = R Z 2 (1 n I 2 1 n f 2), where is the photon's wavelength, ni is the energy level's starting principal quantum number, and nf is the last principal quantum.

What is the light frequency formula?

fλ = c

The equation f = c, where c is the speed of light, connects frequency (f) with wavelength (). Since the speed of light is constant, this equation must be maintained whether the frequency is increased or decreased because the wavelength must decrease.

To know more about frequency visit:-

https://brainly.com/question/5102661

#SPJ4

The combustion of ethylene proceeds by the reaction
C2H4(g) + 3O2(g) → 2CO2(g) + 2H2O(g)
When the rate of disappearance of O2 is 0.37 mol L-1 s-1, the rate of appearance of CO2 is ________ mol L-1s-1.

Answers

Thus, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹ , the rate of appearance of CO₂ is 0.2467 mol L⁻¹ s⁻¹

What is the rate of reaction?

The rate at which a chemical reaction moves forward is known as the reaction rate in chemistry. It is frequently defined in terms of either the concentration of a reactant that is consumed in a unit of time or the concentration of a product that is generated in a unit of time (amount per unit volume).

The equation becomes:

C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(g)

Rate of reaction = [tex]-\frac{d[C_2H_4]}{dt}[/tex] = [tex]-\frac{1}{3} \frac{d[O_2]}{dt}[/tex] = [tex]+\frac{1}{2} \frac{d[CO_2]}{dt}[/tex] = [tex]+\frac{1}{2} \frac{d[H_2O]}{dt}[/tex]

It is given that, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹.

So, [tex]-\frac{1}{3} \frac{d[O_2]}{dt} =[/tex] [tex]+\frac{1}{2} \frac{d[CO_2]}{dt}[/tex]

or,  [tex]-\frac{1}{3} \frac{d[O_2]}{dt}[/tex]  × (-0.37 mol L⁻¹ s⁻¹) = [tex]\frac{d[CO_2]}{dt}[/tex]

or, [tex]\frac{2}{3} \frac{d[O_2]}{dt}[/tex]  × (0.37 mol L⁻¹ s⁻¹) = [tex]\frac{d[CO_2]}{dt}[/tex]

or, 0.2467 mol L⁻¹ s⁻¹ = [tex]\frac{d[CO_2]}{dt}[/tex]

Thus, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹ , the rate of appearance of CO₂ is 0.2467 mol L⁻¹ s⁻¹

To know more about rate of reaction refer to:

https://brainly.com/question/24795637

#SPJ1

Inherited traits are

Answers

Inherited traits are defined as a trait  or a variant which is encoded by  DNA and passed from one generation to another.

What is DNA?

DNA  is a hereditary material  which is present in human beings as well as all other living organisms.  Every cell which is present in an organism's body has DNA  which is the same. Most of the DNA is situated in the cell's nucleus and small amount of it can be found in the cell's mitochondria as well.

Information which is stored in DNA is stored as codes made up of four chemical bases namely, adenine, thymine , cytosine and guanine.Human DNA consists of 3 billion bases .The order of the bases determines information which is required for building and maintaining an organism.

Learn more about DNA ,here:

https://brainly.com/question/30006059

#SPJ1

What organelles can only be seen in detail using an electron
microscope?

Answers

An electron microscope is a type of microscope that uses a beam of electrons to produce images of small objects or structures. Because it has a higher resolving power than a light microscope, an electron microscope can produce much clearer and more detailed images of small structures than a light microscope.

There are several organelles that can only be seen in detail using an electron microscope, including:

Ribosomes: These organelles are responsible for synthesizing proteins and are made up of ribonucleic acid (RNA) and proteins. They are too small to be seen with a light microscope and can only be seen in detail using an electron microscope.
Endoplasmic reticulum (ER): The ER is a series of interconnected flattened sacs or tubes that are involved in the synthesis and transport of proteins and lipids. It has two main types: the smooth ER, which is involved in the synthesis and modification of lipids, and the rough ER, which is studded with ribosomes and is involved in the synthesis and transport of proteins.
Golgi apparatus: The Golgi apparatus is a series of flattened stacks of membranes that are involved in the modification, sorting, and transport of proteins and lipids. It is made up of cisternae, which are flattened stacks of membranes that are connected by vesicles.
Mitochondria: These organelles are responsible for generating energy in the form of ATP and are involved in a variety of other metabolic processes. They have a complex structure that includes a double membrane, cristae, and a matrix, which can only be seen in detail using an electron microscope.
Lysosomes: These organelles are involved in the digestion and breakdown of cellular waste and are made up of enzymes that can break down a variety of biomolecules. They have a characteristic spherical shape that can only be seen in detail using an electron microscope.

the half-life of radium-226 is 1620 years. how long will it take for the original amount to be reduced by 55%?

Answers

If the half-life of radium-226 is 1620 years. The for 55% decomposition of its original amount will take 1397 years.

Calculate the half-life by using the formula as,

A(t) = I(0.5)^t/t1/2

Where t1/2 = half life = 1620

Final amount, A(t) = 0.55 of its original amount = 0.55I

Hence, we have

0.55I = I(0.5)^t/1620

Taking the log of both sides we get,

log(0.55) = log(0.5)^t/1620

t/1620 = log(0.55) / log(0.5)

t/1620 = 0.8624964

t = 0.8624964 × 1620

t = 1397.2441

t = 1397 (nearest whole number)

Hence, for 55% decomposition of its original amount will take 1397 years.

Learn more about half life from the link given below.

https://brainly.com/question/14883322

#SPJ4

how many grams of ethanol, ch3ch2ohch3ch2oh , should you dissolve in water to make 1.30 ll of vodka (which is an aqueous solution that is 6.86 mm ethanol)?

Answers

It takes 410.228 g of ethanol to dissolve in water to get 1.30l of vodka.

What disintegrates in water?

Soluble refers to things that dissolve in water. Examples of soluble materials are salt and sugar. The term "insoluble" refers to substances that do not dissolve in water. Examples of insoluble substances are wheat and sand.

An organic substance is ethanol. It is an alcohol with the molecular structure C2H6O. You may alternatively write its formula as C2H5OH or CH3CH2OH. A volatile, flammable, colorless liquid known as ethanol has a distinctive flavor and smell that is similar to wine.

When making 1.30 liters of vodha, how many grams of ethanol should be dissolved in water.

Formula of ethanol is C2H5OH.

2(C) = 2(12) = 24

5(H) = 5(1) = 5

1(O) =1(16) = 16

1(H) =1(1)= 1

adding them all to get molar mass

The molar mass of ethanol is 46g/mol

The concentration is expressed in molarity or moles solute per liters solution.

The molar mass of ethanol is 46 g/mol.

To obtain a 1.3 L of vodka,

the following stoichiometric calculation is done:

6.86 mol/L * 1.3 L * (46g/mol) = 410.228 g of ethanol is needed

410.228 g of ethanol is needed to be dissolved in water.

To know more about dissolved in water click:

brainly.com/question/12789799

#SPJ4

Other Questions
a square has two diagonals, and a convex pentagon has five diagonals. how many diagonals does a convex decagon have? The diagram below shows a sketch of the graph of y=f(x). The graph crosses the y-axis at the point (0,-2), and the x-axis at the point (8,0).On a piece of paper sketch the graph of y= -4 f(x+3).Record below the coordinates of the point where the graph crosses the x-axis and the coordinate of the point where x= -3.x = ______y = ______and x = ______y = ______ when we fail to take the situation into account when analyzing another person's behavior, we are succumbing to: Question Section 1- Question 13Which statement describes conditions for soldiers in World War I?ABCNormalDSoldiers were fighting with better weapons and training due to industrialization.Soldiers were able to receive medical attention quickly as needed for injuries.Soldiers were confined to trenches and underground bunkers by the constant threat of artillery, infantry gunfire, and poison gas.Soldiers were able to use transportation technology to keep their offensive strategy going. Failure to conduct a _______ opens an organization to the possibility of a negligent hiring suit. Maricopa's Success scholarship fund receives a gift of $ 200000. The money is invested in stocks, bonds, and CDs. CDs pay 3 % interest, bonds pay 5.5 % interest, and stocks pay 11.9 % interest. Maricopa Success invests $ 50000 more in bonds than in CDs. If the annual income from the investments is $ 14480 , how much was invested in each account? Let f(x) be a continuous function such that f(1) = 3 and f'(x) = [tex]\sqrt{x^3+4}[/tex]. What is the value of f(5)? which of the following is classified as an insoluble fiber? A. mucilage B. cellulose C. pectin D. gums Chad is decorating a rectangular ballroom ceiling with decorative lights. Beginning in a corner, Chad strings the lights along the length of the ceiling, a distance of 55 feet. Next, Chad strings the lights along the width of the ceiling, a distance of 48 feet. Then Chad strings the lights straight back to the original corner. At this point, how many feet of lights has Chad used? If necessary, round your answer to the nearest tenth. feet Why might some scientists have problems with Lee Bergers claims? Who served as an ethics consultant to boeing following the document issue coming to light?. Compare and contrast data versus information? (2%) List at least six benefits of ICT? (3%) Discuss on the five main generation of computer? (2%) WRITE short notes on the following computer coding me BCD B) EBCDIC C) ASCII-7 & 8 D) UNICO studies have found that _____ of female students who were drinking alcohol experienced verbal and physical coercion from their male partner. omari buys a computer for $1099. He makes a down payment of 20%. His monthly payments for the computer are $144. How many months will it take omari to finish paying off the computer Suppose that the efficacy of a certain drug is 0.35. Consider the sampling distribution (sample size n = 156)for the proportion of patients cured by this drug.What is the mean of this distribution?What is the standard error of this distribution?(Round answer to four decimal places.) for information to be of real value to a manager, it must be accurate information. what is meant by accuracy? a.accuracy means that information must be communicated by using the right medium. b.accuracy means that the information must provide a valid and reliable reflection of reality. c.accuracy means that information needs to be available in time for appropriate managerial action. d.accuracy means that information should be analyzed. e.accuracy means that information should be complete. For males in a certain town, the systolic blood pressure is normally distributed with amean of 110 and a standard deviation of 5. Using the empirical rule, determine theinterval of systolic blood pressures that represent the middle 99.7% of males. A steel elevator cable supports a load of 900 kg. The cable has a diameter of 2 cm and an initial length of 24 m. Find the stress and the strain of the cable and the amount it stretches under the load. which is the correct answers ?????? Write a paragraph to describe which poem best fits the city theme. Describe the type of poem you chose, and what writing technique the poet used to help you paint a picture in your mind. You can check the rubric to make sure you have everything you need for this project.