How many steps are catalyzed?
The three steps of enzymes are catalyzed. The primary steps of an enzyme-catalyzed response are: substrate and enzyme combine, forming an E-S complex.
The response then occurs, changing the substrate into merchandise and forming an enzyme merchandise complicated. The merchandise then go away the energetic site of the enzyme. The first step of an enzyme catalyzed response is catalytic turnover the binding of substrate via way of means of the enzyme the discharge of product dissociation of the ES complicated ES -> E + P. An enzyme-catalyzed response may be more or less divided into 3 stages: enzyme-substrate binding, "catalysis" and product release.
To learn more about enzyme check the link below:
brainly.com/question/1596855
#SPJ4
what is true about the spontaneity of a reaction? responses when the products have more enthalpy than the reactants, the reaction tends to be spontaneous. when the products have more enthalpy than the reactants, the reaction tends to be spontaneous. when the products have more enthalpy than the reactants, the reaction is always spontaneous. when the products have more enthalpy than the reactants, the reaction is always spontaneous. when the products have less enthalpy than the reactants, the reaction tends to be spontaneous. when the products have less enthalpy than the reactants, the reaction tends to be spontaneous. when the products have less enthalpy than the reactants, the reaction is always spontaneous.
When the products have lower enthalpy than the reactants, the reaction tends to be spontaneous.
Spontaneous reactions are those that occur without any external input of energy. In general, spontaneous reactions tend to occur when the products have lower enthalpy than the reactants.
It is not necessarily true that a reaction will be spontaneous just because the products have lower enthalpy than the reactants. Other factors, such as the entropy of the reactants and products, can also affect the spontaneity of a reaction.
So, to summarize: When the products have lower enthalpy than the reactants, the reaction tends to be spontaneous. However, the spontaneity of a reaction also depends on other factors, such as the entropy of the reactants and products.
To know more about entropy
https://brainly.com/question/13146879
#SPJ4
For a chemical reaction in a closed system, mass cannot be ______________ or _______________. We can say that throughout the reaction mass is _____________.
For a chemical reaction in a closed system, mass cannot be (created) or (destroyed). We can say that throughout the reaction mass is (conversed). Hence, the answer is: D. created; destroyed; conserved.
What is the law of conversation?In chemistry, the law of conversation states that in an isolated system, certain physical property does not change over time. For example, if two reactants react and produce gas, this system's total mass remains the same as the initial mass. Hence, the mass cannot be created or destroyed. It also applies to energy. It cannot be created or destroyed, but just changed from one form of energy to the other.
This question seems incomplete. The complete query is as follows:
“For a chemical reaction in a closed system, mass cannot be ______________ or _______________. We can say that throughout the reaction mass is _____________.
A. rearranged; destroyed; gainedB. created; destroyed; lostC. rearranged; created; conservedD. created; destroyed; conserved”Learn more about the law of conversation here https://brainly.com/question/24772394
#SPJ4
the following data were obtained for the variation of vmax with ph for a reaction catalyzed by a-amylase at 24 oc. what can you conclude about the pka values of the ionizing groups at the active site?
A side chain of aspartate next to a side chain of glutamate inside a hydrophobic pocket.
What is hydrophobic and example?Hydrophobic substances are composed of non-polar molecules that repel bodies of water and attract other neutral molecules and non-polar solvents. Examples of these molecules are alkanes, oils and fats in general.
Why is water a hydrophobic?These two properties of water, namely its polarity and its ability to form strong hydrogen bonds with other polar molecules is what leads to the hydrophobic interactions. Due to the polarity of water, water can dissolve other polar molecules because it can readily form hydrogen bonds with them
To know more about hydrophobic visit:
https://brainly.com/question/16003692
#SPJ4
Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) (Drag and drop into the appropriate area below) mon Categories Meso Compounds Non-Meso Compounds Drag and drop here Drag and drop here U7 QueSLIUI 11 point Categorize the compounds below as meso or non-meso species. 10th attempt See Periodic Table See Hint Items (6 images) /Drag and drop into the appropriate area below) OH Categories Meso Compounds Non-Meso Compounds Drag and droghere
The compounds in below image categorized as meso or non-meso species.
What is meso compound ?A meso compound or meso isomer is one of a group of stereoisomers, at least two of which are optically active, but not the others. This indicates that the molecule is not chiral even though it has two or more stereocenters. The mirror image of a meso compound can be "superposed" on it.
A molecule with many identical stereocenters and an identical or superimposable mirror image is referred to as a meso complex. Enantiomers: Non-superimposable mirror copies of one another, enantiomers are optical isomers.
Thus, The compounds in below image categorized as meso or non-meso species.
To learn more about meso compound, follow the link;
https://brainly.com/question/24084193
#SPJ4
Write the common name of the α‑ketoacid resulting from the transamination of each amino acid.
The α‑ketoacid or the α‑ carboxylic acid are the organic compounds that are the characterize the presence of a keto group at the position of α- in carboxylic acid functional group.
The common name of the α‑ketoacid resulting from the transamination of each amino acid is given as follows :
1) alanine + α‑ketoglutarate ---> pyruvate
2) aspartate + α‑ketoglutarate ----> oxaloacetate
3) glutamate + α‑ketoglutarate -----> α‑ketoglutarate
4) phenylalanine + α‑ketoglutarate ------> phenylpyruvate
5) tyrosine + α‑ketoglutarate -----> p - hydroxyphenyl pyruvate
The amino acids are the organic compounds which contain both the groups the amino acid and the carboxylic acid groups.
To learn more about amino acid here
https://brainly.com/question/14171266
#SPJ4
What is the molarity of sugar if its 20g are dissolved in water to make volume upto 2L?
The molarity of sugar if its 20g are dissolved in water to make volume up to 2L is calculated as 342 g/mol.
What is molarity?A unit of concentration expressed as the number of moles of dissolved solute per liter of solution is called molarity. If number of moles and the volume are divided by 1000, then molarity is expressed as number of millimoles per milliliter of solution.
Molarity is the moles of a solute per liters of a solution and Molarity is also called the molar concentration of a solution.
As we know, Molarity= Mass / (Molar mass × Volume)
Hence, the concentration of sugar;
= 20/342×2
=0.029mol/L.
Now, molar mass of sugar =342 g/mol.
To know more about sugar molarity, refer
https://brainly.com/question/2973074
#SPJ4
Compound A solid
Compound B solid
Compound
C
Compound
D
B
C
gas
D
solid
808
1610
-56
680
yes
no
no
Compound B because it has a very high melting point.
yes
You are studying the differences between ionic and covalent compounds. After studying the properties of each
type of compound, your teacher has provided this table and asked you to (1) identify the ionic compound(s) and
explain your choice(s).
A
Compounds A and D because they have relatively high melting points.
AROLIChessies
Compounds A, B, and C because they are solid at room temperature.
Compounds A and D because the conduct electricity in aqueous solutions.
yes
no
yes
yes
The Compounds A, B, and C are ionic compounds because they are solid at room temperature. Therefore, option B is correct.
What are ionic compound ?A chemical compound known as an ionic compound is one that contains ions bound together by the electrostatic forces known as ionic bonding. Despite having both positively and negatively charged ions, or cations and anions, the molecule is generally neutral.
Ionic chemicals are brittle and rigid. When an ionic chemical is dissolved in water, it separates into ions. Ionic compound solutions and melting forms of these substances carry electricity, while solid materials do not. The chemical formula of an ionic compound is metal + nonmetal or polyatomic ions.
Thus, option B is correct.
To learn more about an ionic compound, follow the link;
https://brainly.com/question/9167977
#SPJ1
a student prepared five solutions of cuso4 with different concentrations, and then filled five cuvettes, each containing one of the solutions. the cuvettes were placed in a spectrophotometer set to the appropriate wavelength for maximum absorbance. the absorbance of each solution was measured and recorded. the student plotted absorbance versus concentration, as shown in the figure above. which of the following is the most likely explanation for the variance of the data point for the 0.600 m cuso4 solution?
(A) The cuvette into which the 0.600 M solution was placed has some water W droplets inside.
(B) The cuvette into which the 0.600 M solution was placed was filled slightly more than the other cuvettes. (C) The wavelength setting was accidentally moved away from that of maximum absorbance. (D) The cuvette used for the 0.600 M solution had not been wiped clean before being put in the spectrophotometer.
The option that is the most likely explanation for the variance of the data point for the 0.600 m cuso4 solution is option (A) The cuvette into which the 0.600 M solution was placed has some water W droplets inside.
What is the variance of the data point?Based on the information provided, the most likely explanation for the variance of the data point for the 0.600 M CuSO4 solution is that the cuvette into which the solution was placed has some water droplets inside. This is because the water droplets would interfere with the measurement of absorbance, causing a variance in the data point. Option (A) is the correct answer.
Note that Option (B) is not a likely explanation because the amount of solution in each cuvette should not affect the absorbance measurement. Option (C) is also unlikely because the wavelength setting is not mentioned as being changed, and option (D) is not a likely explanation because it is not specified that the cuvettes were not wiped clean before being put in the spectrophotometer.
Learn more about wavelength from
https://brainly.com/question/10728818
#SPJ1
What has a Gibbs free energy of 0?
Pure elements has Gibbs free energy equal to 0.
The Gibbs free energy is a concept in chemistry specially of thermodynamics. The maximum amount of work that can be accomplished at a constant temperature and pressure by a closed system can be calculated using the Gibbs free energy (also known as Gibbs energy; symbol: denoted as delta G). Additionally, it offers a prerequisite for any processes like chemical reactions that might take place in such circumstances.
When a system achieves equilibrium without being pushed by an input electrolytic voltage, the Gibbs energy is the thermodynamic potential that is reduced. At the equilibrium point, its derivative w.r.t. the system's reaction coordinate vanishes.
To know more about free energy, click here,
brainly.com/question/13765848
#SPJ4
20. Construct a model of, 1-propanol, C3H7OH.... 20. Construct a model of, 1-propanol, C3H7OH. 21. What is the molecular geometry on each carbon and the oxygen of C3H7OH? 22. Construct a model of, 2-propanol, C3H7OH. 23. We see that 1-propanol and 2-propanol have the same molecular formula, C3H7OH, but different molecular structures. What is the name for molecules that have the same molecular formula but different structural formulas (different shapes)?
Its structure is linear for propane. The final carbon atom is joined to the functional group OH. Isomers are variations of compounds that share the same chemical formula but have various atomic configurations. The image of propan 1 ol and propan 2 ol is attached below.
What is propanol ?A primary alcohol having the chemical formula CH3CH2CH2OH, propan-1-ol is also known as prOH or n-PrOH. It is an isomer of 2-propanol and a colourless liquid.
Acrolein, commonly referred to as propenal or acrylic aldehyde, is a member of the enals class of chemical compounds. These have the typical chemical formula RC=C-CH=O and are alpha, beta unsaturated aldehydes, where the aldehydic C=O function is conjugated to the C=C double bond at the alpha beta position.
Thus, Its structure is linear for propane. The final carbon atom is joined to the functional group OH. Isomers are variations of compounds that share the same chemical formula but have various atomic configurations.
To learn more about propanol, follow the link;
https://brainly.com/question/17920216
#SPJ4
What is the relationship between freezing point depression and concentration of solute or solution?
All solutions have freezing points that are lower than those of pure solvents and that are inversely related to the molality of the solute.
What is depression at the freezing point?A solute's freezing point is completely based on its concentration, not on its mass or chemical composition. A typical instance of freezing point depression is when salt reduces the freezing point of water in cold weather.
Frost point When solute molecules are added to a solvent, a colliding phenomenon known as depression results.
As a result, the freezing temperatures of all solutions are lower than those of pure solvents and are inversely related to the solute's molality.
study the freezing point.
Visit
https://brainly.com/question/9530198
#SPJ4
What are carbon neutral examples?
Some of the carbon neutral examples are Planting trees, Capturing and storing carbon dioxide emissions, Using renewable energy, Purchasing carbon credits, Driving an electric or fuel cell vehicle.
Carbon neutrality refers to achieving net zero carbon dioxide emissions by balancing a measured amount of carbon dioxide emissions with an equivalent amount of carbon dioxide removal or sequestration. Here are some examples of actions or activities that can contribute to carbon neutrality:
Planting trees or other vegetation, which absorb carbon dioxide from the atmosphere as they grow
Capturing and storing carbon dioxide emissions from power plants or other industrial sources
Using renewable energy sources like solar or wind power, which do not emit carbon dioxide during electricity generation
Offsetting emissions by purchasing carbon credits, which represent a reduction or removal of carbon dioxide emissions from the atmosphere
To know more about carbon
https://brainly.com/question/22530423
#SPJ4
What happens to chocolate when you burn it?
Chocolate can stiffen or seize up easily. It happens when you overheat and burn it as well as when you allow the chocolate to come into contact with a small amount of moisture, which is why keeping chocolate dry is always advised.
What does burned chocolate look like?It will no longer have the rich, glossy sheen that characterizes its melted form and instead will appear drab, muddy, and have a thick, sluggish texture. And the harder it will be to save, the longer it cooks at high temperatures.
Does burned chocolate still taste good?You must discard it and start over if it tastes burnt. If it tastes nice, pour it into a fresh bowl that has been chilled and cool it down by stirring in some freshly chopped chocolate.
To know more about amount of moisture visit:-
https://brainly.com/question/14888812
#SPJ4
How many grams of sugar solute per 100 grams of h2o will dissolve at 20oc?
The amount of sugar solute that can dissolve in 100 grams of water at 20°C depends on the type of sugar being dissolved.
What is solute?A solute is any substance that is dissolved in a solution, usually in a liquid. It is the minor component of a solution and is present in a smaller amount than the solvent. The concentration of the solute is usually expressed as a percentage of the total solution. Solutes can be either organic or inorganic compounds, including gases, minerals, and acids. Solutions are important in everyday life, from the salt water in the ocean to the sugar in tea. In fact, almost all biological fluids contain solutes, such as proteins and hormones.
For example, granulated white sugar has a solubility of 204.0 grams per 100 grams of water at 20°C, while brown sugar has a solubility of 180.0 grams per 100 grams of water at 20°C. Therefore, the amount of sugar solute that can dissolve in 100 grams of water at 20°C will depend on the type of sugar being dissolved.
To learn more about solute
https://brainly.com/question/25326161
#SPJ4
The major reservoirs of nitrogen and sulfur in the biosphere are correctly identified as . .
Answer:
Thus, the correct answer is 'Bedrock and atmosphere.
Explanation:
Draw The Major Product Of The Following Reaction. Br KOC(CH3)3 HOC(CH3)3
The major product of the given reaction will be Hoffmann product as shown in the attached diagram.
What is Hoffmann's elimination?Hofmann elimination can be described as an elimination reaction of an amine to generate alkenes. The least stable alkene called the Hofmann product is formed from the Hofmann alkene synthesis rule. This rule contrast with usual elimination reactions, where Zaitsev's rule gives the formation of the most stable alkene.
The Hofmann product is preferentially formed because of the steric bulk of the leaving group causing the hydroxide to abstract easily accessible hydrogen.
In the Hofmann elimination, the least substituted alkene is favored due to intramolecular steric interactions. The formation of the Zaitsev product is energetically less favorable than the conformation needed for the formation of the Hofmann product.
Therefore, the Hofmann product is preferentially formed. In the given reaction less substituted alkene will be formed.
Learn more about elimination reactions, here:
https://brainly.com/question/29695970
#SPJ4
Which has more number of atoms 1.0 g or 1.0 Mg?
The more number of atoms in 1.0 g of the Na and the 1.0 g of the Mg is the 1.0 g of Na has more number of the atoms.
The number of moles is given :
number of moles = mass / molar mass
atomic mass of the Na = 23 g/mol
atomic mass of the Mg = 24 g/mol
number of moles = 1 / 23 mol
number of moles = 1 / 24 mol
number of atoms in 1 g of Na = (6.023 × 10²³) / 23 atoms
= 2.618 × 10²² atoms
number of atoms in 1 g of Mg = (6.023 × 10²³) / 24 atoms
= 2.509 × 10²² atoms
Thus, 1 g of the Na has more number of atoms.
To learn more about moles here
https://brainly.com/question/20486415
#SPJ4
Why is Scope 3 emissions important?
In addition to exposing groups to weather transition risks, Scope 3 emissions can doubtlessly enhance prices inside a firm's fee chain, undermining profitability and, ultimately, marketplace performance.
Scope 3 emissions are among the finest quantity of emissions that groups produce indirectly, so it is going to be vital for manufacturers to attain their sustainability goals, with the blessings to wider society of a greener enterprise environment. These also are oblique emissions – which means the ones now no longer produced with the aid of using the organization itself – however they fluctuate from Scope 2 as they cowl the ones produced with the aid of using clients the use of the organization's merchandise or the ones produced with the aid of using providers making merchandise that the organization uses.
To learn more about emissions check the link below:
https://brainly.com/question/1088517
#SPJ4
which element(s) would have physical and chemical properties similar to oxygen: (a) ar (b) f (c) s (d) br (e) se
Correct answer is :- (c) S (sulfur)
Oxygen (O) and sulfur (S) are chemically similar because sulfur is directly below oxygen in the periodic table. These elements have similar electron configuration. As a result, sulfur forms many compounds that are analogues of oxygen compound.
know more about periodic table here
https://brainly.com/question/11155928#
#SPJ4
aniline is an amine that is used to manufacture dyes. it is isolated as anilinium chloride, [c6h5nh3]cl, a salt prepared by the reaction of the weak base aniline and hydrochloric acid. what is the ph of a 0.233 m solution of anilinium chloride
After solving the equation the pH of a 0.233m solution of anilinium chloride is 2.64.
What is ph of solution?
A solution's acidity is determined by its hydrogen ion concentration, which is measured by its pH. Pure water slightly splits into hydrogen and hydroxyl (OH) ions with equal proportions.
Aniline hydrochloride is conjugate acid of aniline. For calculation of pH we have to find pKa of C6H5NH2HCl and it behaves as a weak acid.
pKa+pKb= pKw
Kb= 4.6×10⁻¹⁰
pKa=14-(-log4.6ₓ10⁻¹⁰)
=4.66
pH=1/2pKa-1/2logc(c=0.233)
=4.66/2+0.63/2(logc= -0.63)
pH= 2.64
For more information about pH please visit:
https://brainly.com/question/12609985
#SPJ4
The ph of a 0.233 m solution of anilinium chloride is 2.64
What purposes does aniline hydrochloride serve?
A powdery, crystalline (sand-like) green or white substance is aniline hydrochloride. It is employed in printing, dyeing, and the synthesis of other compounds.
In order to create polyaniline-coated poly(styrene-co-styrene sulfonate) nanoparticles, aniline hydrochloride was utilized. In the rat spleen and in response to aniline exposure, base excision repair (BER) mediated by 8-oxoguanine glycosylase 1 and Nei-like DNA glycosylases (NEIL1/2) was studied. It is a component of paints, paint removers, and clothes marking inks. Additionally, it is utilized as a shoe and stove polisher.
Commercially, aniline is made by either ammonia reacting with chlorobenzene or catalyzing the hydrogenation of nitrobenzene. Iron borings dissolved in aqueous acid are another method for reducing nitrobenzene
pKa+pKb= pKw
Kb= 4.6×10⁻¹⁰
pKa=14-(-log4.6ₓ10⁻¹⁰)
=4.66
pH=1/2pKa-1/2logc(c=0.233)
=4.66/2+0.63/2(logc= -0.63)
pH= 2.64
To know more about aniline use link below:
https://brainly.com/question/28724995
#SPJ4
Why the freezing point depression at of 0.4 m NaCl solution is nearly twice than that of 0.4 m glucose solution?
This is because the Van't Hoff factor for NaCl is 2 while it is 1 for glucose.
What is freezing point?
When a liquid's temperature falls below its freezing point, it transforms into a solid. According to the internationally accepted definition, freezing refers to the solidification phase change of a liquid or the liquid content of a substance, which occurs most commonly as a result of cooling.
The melting and freezing points of most substances are the same temperature; however, some substances have different solid-liquid transition temperatures. Agar, for example, has a hysteresis in its melting and freezing points. It melts at 85°C (185°F) and solidifies at temperatures ranging from 32°C to 40°C (89.6°F to 104°F).
Hence, this is because the Van't Hoff factor for NaCl is 2 while it is 1 for glucose.
To know more about freezing point from given link
https://brainly.com/question/28032179
#SPJ4
Which of the following has the smallest atomic radius?
A. Rb
B. K-¹
C. k
D. Rb+¹
Answer:
K
Explanation:
What is everything you need to know about atomic structure?
Answer:
Explanation:
An atom is a complex arrangement of negatively charged electrons arranged in defined shells about a positively charged nucleus. This nucleus contains most of the atom's mass and is composed of protons and neutrons (except for common hydrogen which has only one proton).
In order to heat a round bottom flask in a heating mantle, plug the heating mantle into: _________
In order to heat a round bottom flask in a heating mantle, plug the heating mantle into a variac or powermite.
A chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance is known as a chemical reaction.
In order to heat a round bottom flask in a heating mantle we have to plug the heating mantle into a Variac or Powermite which is typically used for controlling the temperature level. Turn the heat up gradually, and do not exceed 50-60% of the maximum output of the device, it advised to do so to avoid any electrical issues such as overloading, short-circuit etc.
Learn more about round bottom flask from the link given below.
https://brainly.com/question/13339404
#SPJ4
isopropyl alcohol (c3h8o) is a common solvent found in household bathrooms (in a water solution). in it's purer form it is also flammable. what does the unbalanced combustion of isopropyl alcohol with insufficient oxygen look like?
Answer: ur mom
Explanation:
u don’t know she could be hot
Divide the compounds below into electron-poor and electron-rich groups. Electron-Poor Compounds: Electron-Rich Compounds:
To solve this, we need to have clear concept about electron rich and electron poor groups. Therefore, electron rich groups are option B,C,F. Electron poor groups are option C,E.
What are electron rich and electron poor groups?It is electron-rich if the core atom contains more than 8 electrons. SO[tex]_2[/tex] is one such example. Sulphur is connected to a total of ten electrons. There are four bond pairings and one lone pair. These serve as effective Lewis bases.
The core atom is considered to be electron accurate if it has exactly 8 electrons; H[tex]_2[/tex]O and NH[tex]_3[/tex] are examples. Depending on whether or not they have lone pairs of electrons, such molecules may or may not behave as Lewis bases.
Therefore, electron rich groups are option B,C,F. Electron poor groups are option C,E.
To know more about electron rich and electron poor groups, here:
https://brainly.com/question/23896547
#SPJ4
Identify the functional groups present in the structure below. Functional Groups a. alkene b. alkyne c. arene d. halide e. alcohol f. ester g. ether h. nitrile i. carboxylic acid j. thiol
There are two functional groups present in the structure below. These groups are arene and ether. The correct options are c and g.
What are functional groups?
An atom or group of atoms inside a molecule that share chemical characteristics when they appear in different compounds is referred to as a functional group.
Certain functional groups have a tendency to behave in a certain way, even though other components of the molecule are very different. Aromatic hydrocarbons include arenes. Originally, the word "aromatic" referred to their odors.
Therefore, the correct options are c, arene, and g, ether.
To learn more about functional groups, refer to the link:
https://brainly.com/question/14618322
#SPJ4
The question is incomplete. Your most probably complete question is given below:
Draw the electron configuration for a neutral atom of titanium. energy
The electron configuration for a neutral atom of titanium 1s² 2s² 2p6 3s²3p6 4s² 3d².
The distribution of electrons within an atom, molecule, or other physical structure in their respective orbitals is known as the electron configuration in atomic physics and quantum chemistry. As an illustration, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the subshells of the first two atoms.
According to electronic configurations, each electron moves on its own in an orbital within the collective average field that all other orbitals form. Slater determinants, also known as configuration state functions, mathematically define configurations.
For systems with a single electron, each electron configuration has a particular amount of energy, and under specific circumstances, electrons are able to switch between these configurations, according to the laws of quantum mechanics.
Learn more about electron configuration here:
https://brainly.com/question/29757010
#SPJ4
What temperature is piping hot?
This expression also referred as boiling hot was used early as the late Middle Ages to describe the steam that fired out of a keeps spouting tea kettle, a device that had been in use since ancient Mesopotamia.
What do you mean by boiling hot?Boiling is the rapid evaporation of a liquid that occurs when it is heated to its boiling point, which is the temperature at which the liquid's vapour pressure equals the pressure exerted on the fluid by the outer air.
What is evaporation?Evaporation is an a kind of vaporization that takes place on the surface of a fluid as it transitions from the liquid phase to the gas phase. When humidity affects the rate of evaporation of water, a high concentration of the dissipating substance in the gas or vapor significantly slows down evaporation.
Learn more about evaporation from
https://brainly.com/question/5019199
#SPJ4