How many milliliters of a sample would you need if you needed 9 million yeast cells to make bread? (You have a yeast concentration of 3 million yeast cells/ml). O 3 O 3 million yeast cells/ml O 3ml O 3 million

Check the picture below.

[tex]\textit{area of a trapezoid}\\\\ A=\cfrac{h(a+b)}{2}~~ \begin{cases} h~~=height\\ a,b=\stackrel{parallel~sides}{bases~\hfill }\\[-0.5em] \hrulefill\\ a=8\\ b=10\\ h=30 \end{cases}\implies A=\cfrac{30(8+10)}{2}\implies A=270[/tex]

In a case whereby Ken and Hamid run around a track where it take Ken 80 seconds to complete a lap It take Hamid 60 seconds to complete a lap. the number of  laps they will each have run when they next meet on the start line is that Ken will have run 3 laps and Hamid will have run 4.

The LCM of 80 nd 60 seconnds can be written as 240,  however when 240 seconds go then they will both be at the start line.

So the lap that  Ken will covered in 240s = 240/80 = 3laps

So the lap that  Hamid will covered in 240s = 240/60 = 4laps

Therefore, we can come into conclusion that Ken will have to run   3laps  where Hamid will have run  4Laps.

Learn more about number of  laps at:

https://brainly.com/question/5471522

#SPJ1

Therefore, the probability mass function of N is:

[tex]P(N=3) = p*(1-p)\\P(N=4) = p*p*(1-p) + (1-p)*(1-p)*p\\P(N=5) = p*p*p*(1-p) + (1-p)*(1-p)*(1-p)*p + 2*p*(1-p)*p*(1-p)\\P(N=6) = p*p*p*p*(1-p) + (1-p)*(1-p)*(1-p)*(1-p) + 3*p*p*(1-p)*(1-p) + \    \ \ \  2*p*(1-p)*p*p*(1-p) + 2*p*p*(1-p)*p*(1-p) \\[/tex]

And so on, for larger values of N.

To find the probability mass function of N, we need to consider the two cases mentioned in the question.

Case 1: A sequence of events followed by an odd.
For this case, the probability of rolling an even number on the first roll is p. The probability of rolling the same even number on the second roll is also p. The probability of rolling an odd number on the third roll is (1-p) because the even numbers have been exhausted. So, the probability of this specific sequence of rolls occurring is p*p*(1-p).

Case 2: A sequence of odds followed by an even.
For this case, the probability of rolling an odd number on the first roll is 1-p. The probability of rolling the same odd number on the second roll is also 1-p. The probability of rolling an even number on the third roll is p because the odd numbers have been exhausted. So, the probability of this specific sequence of rolls occurring is (1-p)*(1-p)*p.

We can then find N's overall probability mass function by adding the probabilities of all possible sequences that lead to observing both an even and an odd number.

The smallest value in support of N must be 3, since it takes at least 3 rolls to observe both an even and an odd number.

Therefore, the probability mass function of N is:

[tex]P(N=3) = p*(1-p)\\P(N=4) = p*p*(1-p) + (1-p)*(1-p)*p\\P(N=5) = p*p*p*(1-p) + (1-p)*(1-p)*(1-p)*p + 2*p*(1-p)*p*(1-p)\\P(N=6) = p*p*p*p*(1-p) + (1-p)*(1-p)*(1-p)*(1-p) + 3*p*p*(1-p)*(1-p) + \    \ \ \  2*p*(1-p)*p*p*(1-p) + 2*p*p*(1-p)*p*(1-p) \\[/tex]

And so on, for larger values of N.

learn more about probability mass function,

https://brainly.com/question/30070005

#SPJ11

The complete sentences are

Draw a segment 6 centimeters long.

Then from one endpoint, draw a 30° angle.

To construct a triangle, we need to know the length of three sides, the length of two sides and the measure of the angle between them, or the length of one side and the measure of the two adjacent angles.

In the given problem we know the length of the sides hence, we can follow the given steps to draw the required triangle

Here we have

Equal length of the side of the triangle = 6 cm

Since the sides are equal the resultant triangle will be an equilateral triangle

To draw a triangle with all side lengths equal to 6 centimeters, we need to follow these steps:

Once all three sides are drawn, you can verify that the triangle is equilateral by measuring the length of each side.

Therefore,

The complete sentences are

Draw a segment 6 centimeters long.

Then from one endpoint, draw a 30° angle.

Learn more about Triangles at

https://brainly.com/question/27220779

#SPJ1

The absolute maximum value of f on the interval [0.2, 20] is 625 and the absolute minimum value of f on the interval [0.2, 20] is 5.04.

To find the absolute maximum and absolute minimum values of f on the given interval, we need to first find the critical points of f and then compare the values of f at these critical points and at the endpoints of the interval.

To find the critical points, we need to find where the derivative of f is equal to zero or undefined. Taking the derivative of f, we get:

f'(x) = 1 + 25 = 0
No solution, so the derivative is never equal to zero.

f'(x) is defined for all x in the interval [0.2, 20]. Therefore, the only critical points are the endpoints of the interval.

To find the value of f at the endpoints, we evaluate f(0.2) and f(20):

f(0.2) = (0.2)^2 + 25(0.2) = 5.04
f(20) = (20)^2 + 25(20) = 625

Comparing the values of f at the critical points and the endpoints, we can conclude that the absolute maximum value of f on the interval [0.2, 20] is 625 and the absolute minimum value of f on the interval [0.2, 20] is 5.04.

Learn more about Maximum:

brainly.com/question/17467131

#SPJ11

y = -7t cos(t) - 7t is the solution of the equation dy = y + 7t² sin(t) as it satisfies the differential equation and the initial condition.

To verify that y = -7t cos(t) - 7t is a solution of the initial-value problem dy/dt = y + 7t² sin(t) with y(π) = 0, we need to check that y satisfies the differential equation and the initial condition.

First, we can calculate the derivative of y with respect to t as follows:

dy/dt = d/dt (-7t cos(t) - 7t)
= -7 cos(t) - 7 + (-7t)(-sin(t))
= -7(cos(t) + t sin(t))

Next, we can substitute y and dy/dt into the differential equation and simplify:

dy/dt = y + 7t² sin(t)
-7(cos(t) + t sin(t)) = (-7t cos(t) - 7t) + 7t² sin(t)
-7 cos(t) - 7 + 7t sin(t) = -7t cos(t) - 7t + 7t² sin(t)
-7 cos(t) - 7 = -7t cos(t) - 7t + 7t² sin(t) - 7t sin(t)
-7 cos(t) - 7 = -7t(cos(t) + sin(t)) + 7t² sin(t)

This equation is true for all t, so we have verified that y = -7t cos(t) - 7t is a solution of the differential equation.

Finally, we need to check the initial condition. Since y(π) = -7π cos(π) - 7π = 0, the initial condition is satisfied.

Therefore, we have confirmed that y = -7t cos(t) - 7t is a solution of the initial-value problem dy/dt = y + 7t²sin(t) with y(π) = 0.

Learn more about  initial-value problem : https://brainly.com/question/19427862

#SPJ11

When all the second order partial derivatives of Z are continuous, (a) Zyx = 5y, (b) Zxyz = 0, (c) Zxyy = 5.

It is given that Zxy = 5y and all second-order partial derivatives of Z are continuous, we can find:

(a) Zyx:
Since all second-order partial derivatives are continuous, we can apply Clairaut's theorem, which states that mixed partial derivatives are equal if they exist and are continuous. Therefore, Zxy = Zyx, so Zyx = 5y.

(b) Zxyz:
To find Zxyz, we need to take the partial derivative of Zyx with respect to z. Since Zyx does not depend on z, its partial derivative with respect to z will be zero. Therefore, Zxyz = 0.

(c) Zxyy:
To find Zxyy, we need to take the second partial derivative of Zxy with respect to y. Given Zxy = 5y, we differentiate with respect to y again: d(5y)/dy = 5. So, Zxyy = 5.

In summary, Zyx = 5y, Zxyz = 0, and Zxyy = 5.

Learn more about "partial derivatives": https://brainly.com/question/28728157

#SPJ11

Answer:

2.5 hours

Step-by-step explanation:

Let's call the time Jim spent on his bike "t", in hours.

We know that the total time of the trip was 4 hours, so the time he spent walking was 4 - t.

We can use the formula:

distance = rate x time

to set up two equations based on the distances traveled while biking and walking:

Distance biked = rate biking x time biking = 41t

Distance walked = rate walking x time walking = 5(4 - t) = 20 - 5t

The total distance of the trip is 110 miles, so:

Distance biked + distance walked = 110

Substituting the equations for distance biked and walked:

41t + 20 - 5t = 110

36t = 90

t = 2.5

So Jim spent 2.5 hours on his bike.

Hope this helps!

(a) M = ∬[R] ρ(x, y) dA. (b) x = (1/M) * ∬[R] x * ρ(x, y) dA y = (1/M) * ∬[R] y * ρ(x, y) dA. (c) The moment of inertia (I_x) about the x-axis can be found using the following integral expression: I_x = ∬[R] y^2 * ρ(x, y) dA

To set up integral expressions for the mass, center of mass, and moment of inertia about the x-axis, let's consider an object with density function ρ(x,y) in a region R on the xy-plane.

(a) The mass (M) of the object can be found using the following integral expression:
M = ∬[R] ρ(x, y) dA

(b) To find the center of mass, we need to find the coordinates (x, y) using the following integral expressions:
x = (1/M) * ∬[R] x * ρ(x, y) dA
y = (1/M) * ∬[R] y * ρ(x, y) dA

(c) The moment of inertia (I_x) about the x-axis can be found using the following integral expression:
I_x = ∬[R] y^2 * ρ(x, y) dA

These integral expressions provide a foundation for finding the mass, center of mass, and moment of inertia about the x-axis for a given object with a specified density function ρ(x, y) in the region R. To evaluate these expressions, you'll need to know the density function and region for the specific problem you're working on.

Learn more about integration here: brainly.com/question/18125359

#SPJ11

The 100(1-α)% confidence interval for a population mean when n is greater than or equal to 30 and σ is unknown is: X ± t_(α/2, n-1) * s/√n.

If n is greater than or equal to 30 and the population standard deviation is unknown, we can use the t-distribution to construct a confidence interval for the population mean.

The formula for the confidence interval is:

X ± t_(α/2, n-1) * s/√n

where X is the sample mean, s is the sample standard deviation, n is the sample size, t_(α/2, n-1) is the t-score with (n-1) degrees of freedom that corresponds to the desired level of confidence (1-α), and α is the significance level.

The degrees of freedom for the t-distribution is (n-1) because we use the sample standard deviation to estimate the population standard deviation.

Therefore, the 100(1-α)% confidence interval for a population mean when n is greater than or equal to 30 and σ is unknown is:

X ± t_(α/2, n-1) * s/√n

where t_(α/2, n-1) is the t-score with (n-1) degrees of freedom that corresponds to the desired level of confidence (1-α).

To learn more about population mean visit: https://brainly.com/question/30727743

#SPJ11

From the Venn diagram, the values of a, b, c and d are11,19,35,35 respectively

A Venn diagram is an illustration that uses circles to show the relationships among things or finite groups of things. Circles that overlap have a commonality while Circles that do not overlap do not share those traits.

The universal set is ∈ = 100

The languages are

Spanish = 30

Russian = 54

(S∪ R)¹ = 35 = d

a = Spanish only = a-b

30-b = a

Russia only = c-b

54 - b

Therefore, The universal set ∈ is

100 = (a-b) + (b)+ (c-b) +(d)

100 =  30-b + b + 54 - b + 35

100 = 119 - b = 119-100

b= 19

Therefore,

a = 30 -19 =11

b = 19

c = 59 - 19 35

d = 35

Learn more about the Venn diagram on https://brainly.com/question/29301560

#SPJ1

The Wronskian of the functions e^x and e^3x is :

2e^4x

The Wronskian is a mathematical concept used in the theory of ordinary differential equations to determine if a set of functions is linearly independent.

The Wronskian of the functions e^x and e^3x is given by the determinant of a matrix formed using these functions and their derivatives. Here's the calculation:

Wronskian(W) = | e^x    e^3x  |
                      | (d/dx)e^x (d/dx)e^3x |

Wronskian(W) = | e^x    e^3x  |
     | e^x    3e^3x |

Wronskian(W) = (e^x)(3e^3x) - (e^3x)(e^x) = 2e^4x

So, the Wronskian of the functions e^x and e^3x is 2e^4x.

To learn more about Wronskian visit : https://brainly.com/question/31484402

#SPJ11

To find the least squares solution of the system Ax = b, we first need to find the pseudoinverse of A (denoted as A+). Then, we can use the formula x = A+ b to find the least squares solution.

To find the pseudoinverse of A, we can use the Moore-Penrose inverse formula:

A+ = (A^T A)^-1 A^T

where A^T is the transpose of A.

Using this formula, we get:

A^T A =
1 0 3 0
0 10 1 4
3 1 2 2
0 4 2 2
0 0 0 6
1 -1 0 0

Taking the inverse of A^T A, we get:

(A^T A)^-1 =
0.0447 -0.0206 0.0358 -0.0323 -0.0171 0.0478
-0.0206 0.0111 -0.0115 0.0074 0.0035 -0.0155
0.0358 -0.0115 0.0505 -0.0395 -0.0125 0.0383
-0.0323 0.0074 -0.0395 0.0356 0.0082 -0.0295
-0.0171 0.0035 -0.0125 0.0082 0.0068 -0.0099
0.0478 -0.0155 0.0383 -0.0295 -0.0099 0.0451

Multiplying A^T and b, we get:

A^T b =
1
1
-1
-1
1
-2

Using the formula x = A+ b, we get:

x =
0.2
0.1
-0.6

Therefore, the least squares solution of the system Ax = b is:

x = (0.2, 0.1, -0.6)

Visit here to learn more about  least squares solution : https://brainly.com/question/30176124
#SPJ11

There are 1716 different flags that can be made with 7 stripes, consisting of 2 white, 2 red, and 3 green stripes using the formula for combinations with repetition.

We can use the formula for combinations with repetition to solve this problem

n = total number of items (stripes)

r₁ = number of items of type 1 (white stripes)

r₂ = number of items of type 2 (red stripes)

r₃ = number of items of type 3 (green stripes)

The formula is

C(n+r₁+r₂+r₃-1, r₁+r₂+r₃-1) = C(7+2+2+3-1, 2+2+3-1) = C(13, 6) = 1716

Therefore, we can make 1716 different flags with 7 stripes if we have 2 white, 2 red, and 3 green stripes.

Learn more about combinations here

brainly.com/question/28720645

#SPJ4

The given series is convergent.

We will use the ratio test to determine the convergence or divergence of the given series:

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) / (ln(n^2+1)/(2n^2+7))|[/tex]

r =[tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) * ((2n^2+7)/(ln(n^2+1)))|[/tex]

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/ln(n^2+1)) * (2n^2+7)/(2(n+1)^2+7)|[/tex]

We note that the expression [tex](ln[(n+1)^2+1]/ln(n^2+1))[/tex] approaches 1 as n approaches infinity. So we can simplify the above expression as:

r = [tex]lim_{n\rightarrow \infty} |(2n^2+7)/(2(n+1)^2+7)|[/tex]

Now, as n approaches infinity, the terms [tex](2n^2+7)[/tex] and [tex]2(n+1)^2+7[/tex] both approach infinity. So we can apply L'Hopital's rule to the limit:

r =[tex]lim_{n\rightarrow \infty } |(4n)/(4n+4)| = lim_{n\rightarrow \infty} |n/(n+1)| = 1[/tex]

Since the limit r is equal to 1, the ratio test is inconclusive. Therefore, we cannot determine the convergence or divergence of the given series using this test.

However, we can use the comparison test to show that the series is convergent. We note that:

[tex]ln(n^2+1) < n^2+1[/tex] for all n >= 1

So we have:

[tex]ln(n^2+1)/(2n^2+7) < (n^2+1)/(2n^2+7)[/tex]

Since the series ∑ [tex](n^2+1)/(2n^2+7)[/tex] converges by the limit comparison test with the series ∑ [tex]1/n^2[/tex], the series ∑ [tex]ln(n^2+1)/(2n^2+7)[/tex] is also convergent by the comparison test.

Therefore, the given series is convergent.

Learn more about convergent series

brainly.com/question/15415793

#SPJ11

The given series is convergent.

We will use the ratio test to determine the convergence or divergence of the given series:

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) / (ln(n^2+1)/(2n^2+7))|[/tex]

r =[tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/(2(n+1)^2+7)) * ((2n^2+7)/(ln(n^2+1)))|[/tex]

r = [tex]lim_{n\rightarrow \infty} |(ln[(n+1)^2+1]/ln(n^2+1)) * (2n^2+7)/(2(n+1)^2+7)|[/tex]

We note that the expression [tex](ln[(n+1)^2+1]/ln(n^2+1))[/tex] approaches 1 as n approaches infinity. So we can simplify the above expression as:

r = [tex]lim_{n\rightarrow \infty} |(2n^2+7)/(2(n+1)^2+7)|[/tex]

Now, as n approaches infinity, the terms [tex](2n^2+7)[/tex] and [tex]2(n+1)^2+7[/tex] both approach infinity. So we can apply L'Hopital's rule to the limit:

r =[tex]lim_{n\rightarrow \infty } |(4n)/(4n+4)| = lim_{n\rightarrow \infty} |n/(n+1)| = 1[/tex]

Since the limit r is equal to 1, the ratio test is inconclusive. Therefore, we cannot determine the convergence or divergence of the given series using this test.

However, we can use the comparison test to show that the series is convergent. We note that:

[tex]ln(n^2+1) < n^2+1[/tex] for all n >= 1

So we have:

[tex]ln(n^2+1)/(2n^2+7) < (n^2+1)/(2n^2+7)[/tex]

Since the series ∑ [tex](n^2+1)/(2n^2+7)[/tex] converges by the limit comparison test with the series ∑ [tex]1/n^2[/tex], the series ∑ [tex]ln(n^2+1)/(2n^2+7)[/tex] is also convergent by the comparison test.

Therefore, the given series is convergent.

Learn more about convergent series

brainly.com/question/15415793

#SPJ11

Note that this is a vector calculus problem and the tabularized answers are attached accordingly. See the explanation below.

This is a vector calculus problem, which is a branch of mathematics that deals with vectors and functions of vectors. It involves the study of vector fields, which are functions that assign a vector to each point in a given region of space, and the operations that can be performed on them, such as gradient, divergence, and curl. It is often studied in the context of calculus, physics, and engineering.

To fill in the table, we need to calculate the curl and divergence of the given vector fields and determine if they are conservative. Here are the calculations:

F1 = (x - 2z)i + (x + 7y + z)j + (z - 2y)k

Curl F1 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= (1 - 0)i + (-2 - 0)j + (7 - 1)k

= i - 2j + 6k

Div F1 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= 1 + 7 - 2

= 6

Since the curl of F1 is not equal to zero, F1 is not a conservative vector field.

Therefore, the table for F1 would be:

F1 Curl F1 DivF1 is conservative (Y/N)?

(x-2z)i + (x+7y + z)j + (z-2y)k <i - 2j + 6k> 6 N

F2 = yzi + xzj + zyk

Curl F2 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= z i + 0j + x k

Div F2 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= z + z + 1

= 2z + 1

Since the curl of F2 is not equal to zero, F2 is not a conservative vector field.

Therefore, the table for F2 would be:

F2 Curl F2 DivF2 is conservative (Y/N)?

yzi + xzj + zyk <zi + 0k> 2z + 1 N

Learn more about vectors at:

https://brainly.com/question/10164701

#SPJ1

Note that this is a vector calculus problem and the tabularized answers are attached accordingly. See the explanation below.

This is a vector calculus problem, which is a branch of mathematics that deals with vectors and functions of vectors. It involves the study of vector fields, which are functions that assign a vector to each point in a given region of space, and the operations that can be performed on them, such as gradient, divergence, and curl. It is often studied in the context of calculus, physics, and engineering.

To fill in the table, we need to calculate the curl and divergence of the given vector fields and determine if they are conservative. Here are the calculations:

F1 = (x - 2z)i + (x + 7y + z)j + (z - 2y)k

Curl F1 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= (1 - 0)i + (-2 - 0)j + (7 - 1)k

= i - 2j + 6k

Div F1 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= 1 + 7 - 2

= 6

Since the curl of F1 is not equal to zero, F1 is not a conservative vector field.

Therefore, the table for F1 would be:

F1 Curl F1 DivF1 is conservative (Y/N)?

(x-2z)i + (x+7y + z)j + (z-2y)k <i - 2j + 6k> 6 N

F2 = yzi + xzj + zyk

Curl F2 = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

= z i + 0j + x k

Div F2 = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= z + z + 1

= 2z + 1

Since the curl of F2 is not equal to zero, F2 is not a conservative vector field.

Therefore, the table for F2 would be:

F2 Curl F2 DivF2 is conservative (Y/N)?

yzi + xzj + zyk <zi + 0k> 2z + 1 N

Learn more about vectors at:

https://brainly.com/question/10164701

#SPJ1

Answer:

Step-by-step explanation:

1 is 58

2 is 90

Answer:

7cm

Step-by-step explanation:

Since 1ml=1cm³ that means 210ml=210cm³

The volume of a cuboid( rectangular prism) is given by L×B×H

The height of the water is just as good as the depth.

L×B×H=volume

6×5×H=210cm³ (divide both sides by 6×5 or 30 to isolate the variable)

[tex] \frac{6 \times 5 \times h}{6 \times 5} = \frac{210}{6 \times 5} [/tex]

H=7cm

: . Depth of water is = 7cm

Therefore, the probability of getting a blue face or a red face in one roll is 2/3.

A cube has six faces, and we know that two of these faces are blue and two are red. Therefore, there are a total of 4 faces that are either blue or  red.

To calculate the probability of getting a blue or a red face in one roll, we can use the formula:

P(blue or red) = P(blue) + P(red)

The probability of rolling a blue face is the number of blue faces divided by the total number of faces, which is 2/6, since there are 2 blue faces out of a total of 6 faces. Similarly, the probability of rolling a red face is also 2/6.

So, substituting these values into the formula, we get:

P(blue or red) = 2/6 + 2/6

= 4/6

= 2/3

Therefore, the probability of getting a blue or a red face in one roll of the cube is 2/3.

To know more about probability,

https://brainly.com/question/30034780

#SPJ11

The three infinite lines of charge, with densities of +3 (nC/m), -3 (nC/m), and +3 (nC/m), respectively, are parallel to the z-axis and pass through specific points.

To determine the electric field at a point, we need to use Coulomb's law and integrate over the length of each line of charge.

The direction of the electric field is perpendicular to the line of charge, and the magnitude is proportional to the charge density and inversely proportional to the distance from the point to the line of charge. The final result will be a vector sum of the electric fields due to each line of charge.

To know more about Coulomb's law click on below link:

https://brainly.com/question/506926#

#SPJ11

complete question:

Three infinite lines of charge, rhol1 = 3 (nC/m), rhol2 = −3 (nC/m), and rhol3 = 3 (nC/m), are all parallel to the z-axis. If they pass through the respective points determine the nature of electric field.

The statement "For any equation containing the variables x and y, the derivative dy/dx can be found by first using algebra to rewrite the equation in the form y = f(x)." is true

For any equation containing the variables x and y, the derivative dy/dx can be found by first using algebra to rewrite the equation in the form y=f(x).
To find the derivative dy/dx, we need to have the equation in the form y = f(x).

By rewriting the equation in this form using algebra,

we can then differentiate the function f(x) with respect to x to find the derivative dy/dx.

Learn more about dy/dx by implicit differentiation: https://brainly.com/question/31401678

#SPJ11

[ hii! your question is done <3 now; can you give me an rate of 5☆~ or just leave a thanks! for more! your welcome! ]

12 = 2 x 2 x 3

18 = 3 x 3 x 2

32 = 2 x 2 x 2 x 2 x 2

100 = 2 x 2 x 5 x 5

140 = 2 x 2 x 5 x 7

76 = 2 x 2 x 19

75 = 3 x 5 x 5

45 = 3 x 3 x 5

42 = 2 x 3 x 7

110 = 2 x 5 x 11

Answer:

5/5 es una fracción adecuada ya que el numerador es igual al denominador.

The measure of angle A and B is 30° and 60° respectively.

Trigonometric Ratios are defined as the values of all the trigonometric functions based on the value of the ratio of sides in a right-angled triangle.

Sin(tetha) = opp/hyp

cos(tetha) = adj/hyp

tan(tetha) = opp/adj

16 is hypotenuse and 8 is opposite

therefore, sin(tetha) = 8/16

sin(tetha) = 0.5

tetha = sin^-1 ( 0.5)

= 30°

The sum of angle in a triangle is 180°. Therefore ,

angle B = 180-(90+30)

= 180-120 = 60°

therefore the measure of angle A and B is 30° and 60° respectively.

learn more about trigonometric ratio from

https://brainly.com/question/24349828

#SPJ1

The absolute minimum value of given trigonometric-function is 331.9 and absolute maximum value of the same function is 4403.

What is absolute value?

The non-negative value of x or its distance from zero on the number line, regardless of its sign, is the absolute value, modulus, or magnitude denoted by | x | for any real number x. When a function reaches its absolute minimum value, it has reached its lowest conceivable value, and when it reaches its absolute maximum value, it has reached its highest possible value.

Given that the trigonometric function is f(t) = 7t + [tex]7 cot\frac{t}{2}[/tex]

Also given the point at which the function has critical values= [[tex]\frac{\pi }{4} , \frac{7\pi }{2}[/tex] ]

Value of function at [tex]\frac{\pi }{4}[/tex] :

f( [tex]\frac{\pi }{4}[/tex] ) = 7( [tex]\frac{\pi }{4}[/tex] ) + 7 cot([tex]\frac{\pi }{4}.\frac{1}{2}[/tex])

       =[tex]\frac{7\pi }{4}[/tex]       + 7 cot ([tex]\frac{\pi }{8}[/tex])

       =315 + 7 cot 22.5

       =315  + 7(2.414)

       = 315 + 16.898

       =331.898

f( [tex]\frac{\pi }{4}[/tex] ) ≈ 331.9

Value of function at [tex]\frac{7\pi }{2}[/tex] :

f( [tex]\frac{7\pi }{2}[/tex] ) = 7( [tex]\frac{7\pi }{2}[/tex] ) + 7 cot([tex]\frac{7\pi }{2}.\frac{1}{2}[/tex])

        =[tex]\frac{49\pi }{2}[/tex]      + 7 cot ([tex]\frac{7\pi }{4}[/tex])

        =4410 + 7 cot 315

        =4410 + 7(-1)

        =4410-7

        =4403

f( [tex]\frac{7\pi }{2}[/tex] ) =4403

The minimum value=331.9 & maximum value is 4403

To know more about absolute, visit:

https://brainly.com/question/1301718

#SPJ1

The solution of quadratic equation is Both sides are approximately (76,601.5 ≈ 76,600)equal, we can conclude that our solution is correct.

A quadratic equation is a polynomial equation of the second degree, meaning it contains one or more terms that involve a variable raised to the power of two. The standard form of a quadratic equation is:

ax² + bx + c = 0

where a, b, and c are constants, and x is the variable.

To solve the equation 2x² + 32,500 = 76,600, we can follow these steps:

Subtract 32,500 from both sides to isolate the term with x²:

2x² = 44,100

Divide both sides by 2 to isolate x²:

x² = 22,050

Take the square root of both sides to solve for x:

x = √(22,050)

Simplify the square root, if possible:

x ≈ 148.53

Therefore, the side length of the square-shaped park is approximately 148.53 meters.

We used the most direct method, which is algebraic manipulation, to solve the equation for x. We first isolated the term with x² by subtracting 32,500 from both sides, then we divided by 2 to isolate x², and finally we took the square root of both sides to solve for x.

We can verify our solution by substituting x ≈ 148.53 back into the original equation and checking if both sides are equal.

2(148.53)² + 32,500 ≈ 76,600

44,101.5 + 32,500 ≈ 76,600

76,601.5 ≈ 76,600

Since both sides are approximately equal, we can conclude that our solution is correct.

To Know more about Quadratic equation Visit:

brainly.com/question/30098550

#SPJ1

The answer is option a i.e. A.

Hi! I'm happy to help with your question involving points, closest, and the xz-plane.

To determine which point is closest to the yz-plane, we need to look at the x-coordinate of each point. The yz-plane is where x = 0, so the point with the smallest absolute value of the x-coordinate is closest. Comparing the x-coordinates:
A(-4, 0, -4) -> |-4| = 4
B(3, 4, -3) -> |3| = 3
C(2, 3, 7) -> |2| = 2

C has the smallest absolute value of the x-coordinate, so it is closest to the yz-plane. Therefore, the answer is c. C.

To determine which point lies in the xz-plane, we need to look at the y-coordinate of each point. A point lies in the xz-plane when its y-coordinate is 0. Checking the y-coordinates:
A(-4, 0, -4) -> y = 0
B(3, 4, -3) -> y ≠ 0
C(2, 3, 7) -> y ≠ 0

Only point A has a y-coordinate of 0, so it lies in the xz-plane. Therefore, the answer is a. A.

Learn more about coordinate systems

brainly.com/question/29762404

#SPJ11