Xylem tissue is similar to hydroids in that both are involved in the transport of fluids in plants.
However, xylem tissue is distinct from hydroids in its function and structure. Xylem tissue is responsible for transporting water and nutrients from the roots to the leaves of a plant, while hydroids primarily transport water throughout the body of the plant.
Additionally, xylem tissue is composed of specialized cells called tracheids and vessel elements, which are more efficient at water transport than the cells found in hydroids.
Overall, while both xylem tissue and hydroids play important roles in plant physiology, they have distinct differences in function and structure.
To know more about tracheids click on below link:
https://brainly.com/question/15302827#
#SPJ11
9. What attaches to oxygen and carbon dioxide gas in the blood?
hemoglobin
platelets
blood cells
plasma
the answer is haemohlobin also pls give brainliest answer
Answer:
Hemoglobin
Explanation:
Hemoglobin is made up of four symmetrical subunits and four heme groups. Iron associated with the heme binds oxygen. It is the iron in hemoglobin that gives blood its Red color.
Put the following events of excitation-contraction coupling in the order in which they occur. 1. Excitation 2. Sarcomere shortening 3. Generation of muscle tension 4. Neural control 5. Contraction cycle begins 6. Release of calcium ions O A) 4,1,5,2,6,3 O B) 4,1,6,5,2,3 O C) 1,2,5,6,3,4 O D) 6,1,4,2,5,3 O E) 1,4,6,2,5,3
B) 4,1,6,5,2,3. Excitation-contraction coupling refers to the sequence of events that lead to muscle contraction. The correct order of these events is:
1. Neural control - the nervous system sends a signal to the muscle fiber.
2. Excitation - the signal triggers the release of calcium ions from the sarcoplasmic reticulum.
3. Calcium ion release - the calcium ions bind to troponin, causing a shift in tropomyosin that exposes the myosin binding sites on actin.
4. Contraction cycle begins - the myosin heads bind to the actin filaments and pull them towards the center of the sarcomere, shortening the muscle fiber.
5. Generation of muscle tension - the muscle fiber generates force as the sarcomeres shorten.
6. Relaxation - when the neural signal stops, the calcium ions are pumped back into the sarcoplasmic reticulum, the myosin heads release the actin filaments, and the muscle fiber relaxes.
Therefore, the correct order of events is B) 4,1,6,5,2,3.
Learn more about muscle contraction here:
https://brainly.com/question/15876085
#SPJ11
You use a cotton swab to collect bacteria from the bottom of your shoe for an experiment. Why do you need to discard the swab in a biohazard bag when finished with it? a. The cotton swab came into contact with a media plate b. Everything used in a microbiology lab goes in biohazard regardless of the luzard it presents c. The swab is now contaminated with microbes from the environment and should not be discarded with normal trash d. The swab contains a culture medium that could facilitate bacterial growth
The correct answer is c.
The swab is now contaminated with microbes from the environment and should not be discarded with normal trash. When collecting bacteria from the bottom of a shoe, the cotton swab comes into contact with various microorganisms that may be harmful to human health. Therefore, it is important to dispose of the swab properly in a biohazard bag to prevent any potential contamination of the environment. Even if the swab did not come into contact with a media plate or contain a culture medium, it still should be treated as a biohazard due to the possibility of carrying harmful bacteria.
Learn more about microbes here-
https://brainly.com/question/14571536
#SPJ11
Scientists classify organisms into groups based on
I. evolutionary phylogeny.
II. DNA analysis.
III. embryology.
IV. morphology.
A.
I, II, and III only
B.
I, II, III, and IV
C.
I and III only
D.
I, III, and IV only
Reset
Answer:
B. I, II, III, and IV
Scientists classify organisms into groups based on all of the choices listed
Evolutionary phylogeny refers to the evolutionary history of a species, and scientists use this information to group organisms into different categories based on their shared ancestry. DNA analysis is also a crucial tool for determining evolutionary relationships between different organisms.
Embryology involves studying the development of embryos, and similarities in embryonic development can help scientists identify evolutionary relationships between organisms.
Morphology, which refers to the physical structure and form of an organism, is another key factor in classifying organisms. Scientists use similarities in anatomical features such as bone structure, internal organs, and other physical characteristics to group organisms into different categories.
Therefore, based on the above explanation, the correct answer is B, which includes all of them.
Have a good day!
how is it possible for two white squashes to generate progeny with color?
It is possible for two white squashes to generate progeny with color due to the genetic principles of inheritance and dominance.
In this scenario, both white squash plants likely carry a recessive gene for coloration, which is masked by the dominant gene for the absence of color. When these two white squashes reproduce, their progeny inherit one gene from each parent, creating various combinations of dominant and recessive alleles. Using Mendelian genetics, we can assume that each white squash parent has a genotype of Ww (W representing the dominant white allele, and w representing the recessive colored allele). When they cross-pollinate, the possible combinations of alleles in the offspring are WW, Ww, wW, and ww. Three of these combinations (WW, Ww, wW) result in white offspring due to the presence of the dominant W allele, while the ww combination allows the recessive colored allele to be expressed.
As a result, there is a 25% chance that the progeny will exhibit coloration (ww), and a 75% chance that they will remain white (WW, Ww, wW). In conclusion, it is possible for two white squashes to generate colored progeny through the inheritance and expression of recessive alleles during reproduction.
Learn more about Mendelian genetics at:
https://brainly.com/question/30238284
#SPJ11
the human β-globin polypeptide contains 146 amino acids. part a how many mrna nucleotides are required to encode this polypeptide?
438 mRNA nucleotides are required to encode the human β-globin polypeptide. The number of nucleotides in the mRNA by three to get the number of codons needed to code for the polypeptide.
The genetic code is a set of rules that determine how the four-letter nucleotide code of DNA is translated into the 20-letter amino acid code of proteins. In the case of the human β-globin polypeptide, which contains 146 amino acids, the number of mRNA nucleotides required to encode it can be calculated using the following steps:
Determine the number of nucleotides required to encode a single amino acid: Since the genetic code is a triplet code, meaning that three nucleotides (a codon) specify each amino acid, we can divide the number of nucleotides in the mRNA by three to get the number of codons needed to code for the polypeptide.Multiply the number of amino acids by the number of nucleotides per codon: The human β-globin polypeptide contains 146 amino acids, so we can multiply this by 3 to get the total number of nucleotides needed to code for the polypeptide. Therefore, the total number of mRNA nucleotides required to encode the human β-globin polypeptide is 146 amino acids x 3 nucleotides per codon = 438 nucleotides.Learn more about amino acids: https://brainly.com/question/14351754
#SPJ11
What are the greatest ways that insects have harmed us and shaped human society.
Insects have harmed us by spreading disease, damaging crops, and causing economic losses. They have shaped human society through pollination and inspiring technological innovations.
Insects such as mosquitoes, fleas, and ticks have spread diseases such as malaria, typhus, and Lyme disease, causing significant harm to human populations. Insects such as locusts and aphids have damaged crops, leading to food shortages and economic losses. However, insects have also had positive impacts on human society. For example, bees and other pollinators play a critical role in agriculture, and without them, many crops would not exist. Insects have also inspired technological innovations such as the development of velcro, which was inspired by the hooks on burdock seeds. Overall, insects have both harmed and benefited human society and continue to play an important role in our lives.
Learn more about Insects here:
https://brainly.com/question/28174759
#SPJ11
by their nature, pigments absorb some wavelengths and reflect others. which wavelengths in the visible spectrum possess the most energy? the least?
The wavelengths of violet and blue are the shortest and carry the greatest energy, whereas the wavelengths of red are the longest and carry the least energy.
What are pigments and some examples?Umbers, ochres, and siennas, which are extracted from the earth, are examples of natural inorganic pigments. The same names are used for synthetically created pigments. Cadmium yellow/orange/red, cobalt blue, and titanium white are more examples of synthetic inorganic pigments.
What do they mean by pigments?Chemicals called pigments display wavelengths of visible light, giving them their colorful appearance. A certain class of pigments, which provide color and have the capacity to absorb some wavelengths, are found in plants, flowers, algae, some photosynthetic bacteria, and even in the skin of animals.
To know more about Pigments visit:
https://brainly.com/question/24193152
#SPJ1
name and explain the purpose of the constitution that protects citizens against the human right violation of life (2 marks)
The constitution that protects citizens against the human right violation of life is the Universal Declaration of Human Rights (UDHR), which was adopted by the United Nations General Assembly in 1948. The purpose of the UDHR is to provide a common standard of human rights that should be universally respected and protected. Specifically, Article 3 of the UDHR states that "everyone has the right to life, liberty, and security of person," which means that individuals should be protected against any actions that could threaten their lives, including unlawful killing, torture, and other cruel, inhuman, or degrading treatment or punishment. Therefore, the UDHR serves as an important document to ensure that individuals' fundamental rights are protected, including the right to life.
magine you genetically engineered a neuron to produce voltage-gated na and k channels that opened at the same time in response to a change in voltage. how would that change the recording shown in the figure? consider the image. a graph of an action potential curve identifies five distinct regions labeled 1 through 5. membrane potential in millivolts is on the y axis and 3 milliseconds of time is represented on the x axis. the membrane potential is at a constant resting potential of -70 millivolts, as indicated by a flat line, until about 1.25 milliseconds when membrane potential increases slightly to the threshold of excitation, approximately -55 millivolts. at region 1, the membrane potential has met the threshold of excitation and the action potential rapidly shoots upward along region 2 to a peak membrane potential of nearly 40 millivolts at around 1.66 milliseconds, marked region 3. after the peak, the graph rapidly falls again, crossing below the resting potential around 2.25 milliseconds at region 4. the curve reaches a low point, region 5, of about -100 millivolts around 2.5 milliseconds before gradually returning to resting potential by 3 milliseconds. imagine you genetically engineered a neuron to produce voltage-gated na and k channels that opened at the same time in response to a change in voltage. how would that change the recording shown in the figure? threshold values would increase. no action potential would be generated. the period of hyperpolarization would be longer. the peak would occur over a longer period of time. the peak voltage would be higher.
If a neuron is genetically engineered to produce voltage-gated Na+ and K+ channels that opened at the same time in response to a change in voltage, it would affect the shape of the action potential curve.
In the original recording shown in the figure, voltage-gated Na+ channels opened first, leading to a rapid depolarization phase, and then voltage-gated K+ channels opened later, leading to repolarization and hyperpolarization. However, if the channels opened simultaneously, the peak of the action potential would be lower, and the shape of the curve would be broader due to the overlapping of Na+ and K+ conductances.
This would result in a longer period of depolarization and slower repolarization. Therefore, the peak would occur over a longer period of time, and the peak voltage would be lower. Overall, the genetically engineered neuron would produce a modified action potential with different characteristics than the original.
Learn more about Neuron here:- brainly.com/question/13061744
#SPJ11
Globular proteins are typically constructed from several layers of secondary structure, with a hydrophobic core and a hydrophilic surface. Is this true for a fibrous protein such as alpha keratin?
Yes, the statement about globular proteins is true, but the structural organization of fibrous proteins like alpha-keratin is different. Alpha-keratin is a fibrous protein primarily found in hair, nails, and skin, and is characterized by a coiled-coil structure formed by two intertwined alpha-helices.
This structure results in a highly stable and strong protein. In contrast to globular proteins, which possess a hydrophobic core and hydrophilic surface, fibrous proteins like alpha-keratin have repeating patterns in their primary sequences, creating an elongated, rod-like structure. The amino acid side chains in alpha-keratin mostly consist of hydrophobic residues, contributing to the overall stability and water-insolubility of the protein. Additionally, alpha-keratin is stabilized by disulfide bridges formed by cysteine residues, which further enhances its mechanical strength.
In summary, while globular proteins have a hydrophobic core and hydrophilic surface, fibrous proteins such as alpha-keratin exhibit a different structural organization featuring a coiled-coil structure, elongated shape, and predominantly hydrophobic amino acid composition.
To learn more about Globular Proteins :
https://brainly.com/question/13637212
#SPJ11
Question 1-2
Greenhouse gases are causing our glaciers to melt which is impacting the cryosphere. How does this affect global temperatures?
A) Temperatures are increasing because more UV radiation is being reflected.
B) Temperatures are increasing because more UV radiation is being absorbed.
C) Temperatures are decreasing because more UV radiation is being reflected.
D) Temperatures are decreasing because more UV radiation is being absorbed.
Because far more Ultraviolet light is reflected, temperatures are rising. This has an impact on global temperatures.
Who is most vulnerable to UV rays?People with white skin are significantly more likely to just have UV rays damage their skin (and develop skin cancer), but people with darker skin, including individuals of any ethnicity, may be affected. When some people absorb UV rays, their skin tans.
What colors are effective at blocking UV rays?Darker colors, according to the Cancer Council of Australia, absorb Uv radiation, which completely blocks those from your skin. As a result, dark blue, black, or dark red are better alternatives for sun protection than white and pastel colors that match the fabric.
To know more about UV radiation visit :
https://brainly.com/question/31066792
#SPJ1
what factor primarily controls the time lag between a change in the energy balance of the planet and an increase or decrease in planetary temperatures?
The factor that primarily controls the time lag between a change in the energy balance of the planet and an increase or decrease in planetary temperatures is the thermal inertia of the planet.
The thermal inertia of the planet is primarily determined by the heat capacity and circulation patterns of the atmosphere and oceans. The atmosphere has a relatively low heat capacity but responds quickly to changes in the energy balance, while the oceans have a much higher heat capacity and respond more slowly. As a result, changes in the energy balance of the planet can cause rapid temperature changes in the atmosphere, but it may take decades or even centuries for the oceans to fully adjust. This can lead to a time lag between changes in greenhouse gas concentrations or solar radiation and the resulting temperature changes.
Additionally, the time lag between changes in the energy balance and temperature changes can vary depending on the location and season. For example, the Arctic and Antarctic regions have a greater thermal inertia than other areas of the planet, and temperature changes in these regions can lag behind changes in other regions. Furthermore, seasonal changes in temperature can be affected by the time lag between changes in the energy balance and temperature changes, leading to variations in the timing and extent of seasonal changes.
Know more about planetary temperatures here:
https://brainly.com/question/30471929
#SPJ11
ou should be able to trace carbon atoms through glycolysis and fermentation Imagine an experiment in which cells carrying out glycolysis are given glucose labeled with c (a Map radioactive isotope of carbon) in the carbon atom(s) indicated below. Where will this carbon be found in the intermediate(s) and/or product(s) of glycolysis? You start with glucose labeled with MC at carbon 6. Where will this label be found after the reaction catalyzed by aldolase is completed? O Carbon 3 in G3P. O Carbon 1 in DHAP O Carbon 3 in DHAP O Carbon 2 in G3P O Carbon 1 in G3P O Carbon 2 in DHAP
If cells carrying out glycolysis are given glucose labeled with MC at carbon 6, the label will be found in carbon 3 of G3P after the reaction catalyzed by aldolase is completed.
Where will the carbon be found during glycolysis?
The carbon will be in G3P. This is because aldolase cleaves the 6-carbon molecule into two 3-carbon molecules - glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). Since carbon 6 of glucose is now part of DHAP, it will not be labeled with MC. However, carbon 3 of G3P will be labeled with MC because it originally came from carbon 6 of glucose.
During fermentation, the fate of the labeled carbon depends on the specific pathway being used. In alcoholic fermentation, for example, the labeled carbon will end up in ethanol, while in lactic acid fermentation, it will end up in lactate.
To know more about glycolysis, visit:
https://brainly.com/question/30828407
#SPJ11
If cells carrying out glycolysis are given glucose labeled with MC at carbon 6, the label will be found in carbon 3 of G3P after the reaction catalyzed by aldolase is completed.
Where will the carbon be found during glycolysis?
The carbon will be in G3P. This is because aldolase cleaves the 6-carbon molecule into two 3-carbon molecules - glyceraldehyde-3-phosphate (G3P) and dihydroxyacetone phosphate (DHAP). Since carbon 6 of glucose is now part of DHAP, it will not be labeled with MC. However, carbon 3 of G3P will be labeled with MC because it originally came from carbon 6 of glucose.
During fermentation, the fate of the labeled carbon depends on the specific pathway being used. In alcoholic fermentation, for example, the labeled carbon will end up in ethanol, while in lactic acid fermentation, it will end up in lactate.
To know more about glycolysis, visit:
https://brainly.com/question/30828407
#SPJ11
Which choice correctly lists the approximate number of ATP produced by (1) metabolism of a 16-carbon fatty acid, (2) fermentation of a single glucose, and (3) aerobic respiration of a single glucose, in that order? For this calculation, you will need to know that each 2-carbon unit cleaved from the fatty acid yields one NADH and one FADH2, and the 2-carbon unit is added to coenzyme A to become acetyl-CoA, which is further metabolized by the citric acid cycle.
A.75, 10, 25
B. 100, 1, 10
C.40, 10, 20
D. 50, 10, 20
E. 108, 2, 32
The correct option is E 108, 2, 32, which states that a 16-carbon fatty acid will yield 8 molecules of acetyl-CoA, accurately states the approximate number of ATP produced by this process.
How does aerobic respiration generate 36 ATP?As many as 32 additional ATP molecules are produced by the Krebs cycle, pyruvate transformation, and electron transport from the NADH and FADH2 molecules produced by glycolysis. As a result, during the process of cellular respiration, up to 36 molecules of ATP might be produced from only one molecule of glucose.
Amount of ATP created during aerobic and anaerobic processes?Compared to anaerobic respiration, aerobic respiration is significantly more energy-efficient. Up to 38 ATP can be produced aerobically for every glucose. Only 2 ATP are produced per glucose by anaerobic reactions.
To know more about fatty acid visit:-
https://brainly.com/question/13528495
#SPJ1
when looking at the antibiotic sensitivity plates, some disks have larger clear areas around them. what do we call that area?
The larger clear areas around antibiotic disks on a sensitivity plate are known as zones of inhibition.
The zone of inhibition is a circular area where the bacteria on the agar medium cannot grow due to the presence of the antibiotic. The diameter of the zone of inhibition correlates with the effectiveness of the antibiotic against the specific bacterial strain tested. The larger the diameter of the zone of inhibition, the more effective the antibiotic is at inhibiting bacterial growth. The size of the zone of inhibition is influenced by various factors including the diffusion rate of the antibiotic, the concentration of the antibiotic, and the susceptibility of the bacteria to the antibiotic.
Learn more about antibiotic disks
https://brainly.com/question/6589445
#SPJ4
The point in a muscle twitch when the troponin is bound to calcium is called the
a. isotonic period
b. stimulus phase
c. relaxation phase
d. contraction phase
e. latent period
The point in a muscle twitch when the troponin is bound to calcium is called the contraction phase (d). During a muscle twitch, a single, brief contraction and relaxation of muscle fibers occurs in response to a stimulus. The process involves a series of events that lead to the shortening of muscle fibers and the generation of force.
The contraction phase begins when calcium ions, released from the sarcoplasmic reticulum, bind to troponin. This binding causes a conformational change in the troponin-tropomyosin complex, which allows the myosin heads to attach to the actin filaments. The subsequent pulling of actin filaments by myosin heads generates muscle tension and results in contraction.
Other phases in a muscle twitch include the latent period (e), which is the brief time between the stimulus and the onset of contraction, and the relaxation phase (c), when the muscle fibers return to their resting state after the contraction has occurred. The isotonic period (a) and stimulus phase (b) are not recognized terms within the context of muscle contraction.
Learn more about contraction here:
https://brainly.com/question/4504596
#SPJ11
create the truth table that belongs to the following multiplexer implementing function f(a, b, c).
To create the truth table, we need to list all of the possible input combinations for a, b, and c, and then calculate the corresponding output based on the function f.
Here's what the truth table would look like:
| a | b | c | f(a, b, c) |
|----|----|---|-------------|
| 0 | 0 |0 | 0 |
| 0 | 0 | 1 | 1 |
| 0 | 1 | 0 | 0 |
| 0 | 1 | 1 | 0 |
| 1 |0 | 0 | 1 |
| 1 | 0 | 1 | 1 |
| 1 | 1 | 0 | 1 |
| 1 | 1 | 1 | 1 |
A multiplexer, also known as a MUX, is a type of digital switch that selects one input signal from multiple sources and routes it to a single output line.
The selection of the input is controlled by a set of control signals, which are typically binary.
In the case of a 3-input multiplexer, like the one we have here with inputs a, b, and c, there are 2^3 = 8 possible combinations of input signals that can be selected. Each combination will produce a unique output, which is the result of the function f(a, b, c) that is being implemented.
In this truth table, all of the possible input combinations for a, b, and c are listed, and the corresponding output is calculated based on the function f(a, b, c) that is being implemented. As we can see, the output depends on the values of a, b, and c, and can be either 0 or 1 depending on the input combination.
Learn more about the truth table: https://brainly.com/question/28032966
#SPJ11
Self-splicing RNAs work because the a. SnRNAs found outside of the nucleus are activated instantaneously
b. double-stranded nature of RNA structure can create an enzyme-like effect if folded properly
c. conditional mutations in time-sensitive situations maintain phenotypic translation d. replacement of T with U causes a structural change that activates ribozymes
b. Self-splicing RNAs work because the double-stranded nature of RNA structure can create an enzyme-like effect if folded properly.
Self-splicing RNAs are a type of RNA molecule that can catalyze their own splicing reaction without the help of additional proteins. This is possible because of the way the RNA molecule is structured. Self-splicing RNAs have specific sequences and structural motifs that allow them to fold into a specific shape. When the RNA molecule folds in this way, it can create an enzyme-like effect that allows it to catalyze its own splicing reaction. This process is important for the regulation of gene expression and has been found in many different organisms.
To know more about RNA - https://brainly.com/question/28073947
#SPJ11
the distribution of blood types for 100 americans is listed in the table. if one donor is selected at random, find the probability of not selecting a person with blood type ba. 0.01b. 0.10c. 0.99d. 0.05
The distribution of blood types for 100 Americans is listed in the table. If one donor is selected at random, the probability of not selecting a person with blood type would be 0.96.
Determining the probability of not selecting a person with blood type ba:
To find the probability of not selecting a person with blood type ba, we need to first determine the percentage of Americans with blood type ba. Looking at the table, we see that 4% of Americans have blood type ba.
Therefore, the probability of selecting a person with blood type ba is 0.04.
To find the probability of not selecting a person with blood type ba, we can subtract this probability from 1:
1 - 0.04 = 0.96
So the probability of not selecting a person with blood type ba is 0.96.
Therefore, the answer is c. 0.99 is incorrect because it represents the probability of not selecting a person with blood type a, not ba. 0.01, 0.05, and 0.10 are also incorrect because they do not take into account the percentage of Americans with blood type ba.
To know more about blood groups, visit:
https://brainly.com/question/17052766
#SPJ11
The rearrangement of connections at synapses, which occurs throughout life, is termed. A) elasticity. B) intelligence. C) plasticity. D) senility.
The rearrangement of connections at synapses, which occurs throughout life, is termed as (C) plasticity.
The rearrangement of connections at synapses throughout life is termed synaptic plasticity, which allows the brain to adapt to new experiences and learn new information. Neuroplasticity – or brain plasticity is the ability of the brain to rearrange its connections or re-wire itself. Without which any brain, not just the human brain , would be unable to develop from infancy through to adulthood or recover from brain injury.
To know more about Rearrangement of connections at synapses https://brainly.com/question/27363216
#SPJ11
In a test-tube you combined a GPCR with its cognate G protein heterotrimer and supplemented the reaction with excess GTP. Aliquots of the reaction were then collected at several time points and used to determine the time-course of GTP hydrolysis. Analyzing the time-course you found that the GTP hydrolysis rate of the reaction is 1 uM GTP/s. You then used this setup as an assay system to test the effects of a novel protein X that you suspect could regulate G protein signaling. You found that addition of protein X to the reaction speeds up the rate of the GTP hydrolysis to 10 uM GTP/s. Suggest a mechanism for protein X action. If you can think of more than one mechanism, what would you change in experimental setup to distinguish between the possibilities?
The pace at which the G protein heterotrimer hydrolyzes GTP appears to be accelerated by Protein X. Protein X serving as a GTPase-activating protein (GAP) for the G protein alpha subunit.
This is in charge of hydrolyzing GTP into GDP, is one potential mechanism for this activity. In this scenario, protein X would attach to the G protein alpha subunit and activate its intrinsic GTPase, accelerating GTP hydrolysis.
The effects of protein X on the G protein alpha subunit and the GPCR might be examined individually in future tests to help rule out one of these scenarios. To see if protein X alone is enough to encourage G protein-mediated GTP hydrolysis, for instance.
Learn more about G protein visit: brainly.com/question/1305997
#SPJ4
results when the spinal motor neurons are destroyed by disease. a.spina bifida b.spastic paralysis c.flaccid paralysis d.neural tube defect
The condition that results when the spinal motor neurons are destroyed by disease is c. flaccid paralysis.
Flaccid paralysis occurs when there is damage to the spinal motor neurons, which are responsible for sending signals from the brain to the muscles. This damage can be caused by various diseases, such as polio or amyotrophic lateral sclerosis (ALS). When these neurons are damaged, the muscles can no longer receive signals from the brain, leading to weakness and paralysis.
In contrast, spina bifida and neural tube defects are developmental disorders affecting the spinal cord and neural tube, respectively, while spastic paralysis results from damage to upper motor neurons and is characterized by involuntary muscle contractions.
Learn more about neurons here:
https://brainly.com/question/31215300
#SPJ11
What is the complementary sequence of DNA that would basepair to the following sequence: 5’-ATCCAGGT-3’? Remember that the complementary sequence should be anti-parallel.
A. 5’-TGGACCTA-3’
B. 5’-ACCTGGAT3’
C. 5’-ATCCAGGT-3’
D. 5’-TAGGTCCA-3’
D. 5’-TAGGTCCA-3’ would be the complementary sequence of DNA that would basepair to the given sequence 5’-ATCCAGGT-3’.
In DNA, the base pairs always follow the rule of complementary base pairing, where Adenine (A) pairs with Thymine (T) and Cytosine (C) pairs with Guanine (G). Therefore, the given sequence would pair with its complementary sequence in the following way:
5’-ATCCAGGT-3’ (original sequence)
3’-TAGGTCCA-5’ (complementary sequence, anti-parallel)
Note that the orientation of the two sequences is anti-parallel, meaning one sequence is read in the 5’ to 3’ direction while the other is read in the 3’ to 5’ direction.
Learn more about DNA here-
https://brainly.com/question/264225
#SPJ11
Veins Are Always Oxygen Deficient, And Thus Are Always Blue Or Green In Coio True False
False.
Veins are not always blue or green in color as they can appear differently in different people. This is due to the fact that the color of veins depends on a number of factors such as the concentration of oxygen and other gases in the blood, the thickness and color of the skin, and the angle and intensity of light shining on the skin. While veins can appear blue or green in some individuals, they can also appear purple, red, or even black in others. Therefore, it is incorrect to assume that veins are always oxygen deficient and always blue or green in color..
Know more about Veins here:
https://brainly.com/question/13983972
#SPJ11
in e. coli, what mechanism provides genetic variation?
In E. coli, genetic variation can be provided by several mechanisms, including Transformation: E. coli can take up and incorporate DNA from the environment, allowing for the acquisition of new genes and traits.
Conjugation: E. coli can transfer genetic material to other bacteria through a process called conjugation. This allows for the spread of beneficial traits, such as antibiotic resistance, between bacterial populations.
Transduction: E. coli can be infected by bacteriophages, which can transfer DNA from one bacterium to another. This can introduce new genetic material and provide genetic variation.
Mutation: E. coli, like all organisms, can undergo spontaneous mutations in their DNA. These mutations can create new genetic variations and traits that may be beneficial, detrimental, or neutral to the bacterium's survival and reproduction.
Overall, these mechanisms of genetic variation in E. coli allow for adaptation and evolution of the bacteria in response to changes in their environment, including the presence of antibiotics and other selective pressures.
To know more about Mutation
brainly.com/question/17130462
#SPJ11
what is the purpose of technology assessment in the biomimetic design process?
The purpose of technology assessment in the biomimetic design process is to evaluate and compare the technological solutions available for a given design challenge against solutions found in nature.
What is Technology Assesment?Technology assessment in biomimicry involves examining existing technologies and evaluating them based on their ability to mimic the functional properties of natural systems. This assessment can include factors such as material properties, energy consumption, environmental impact, and cost-effectiveness. By comparing the performance of these technologies to the natural systems they aim to emulate, designers can identify gaps in current technology and potential areas for improvement.
Incorporating biomimetic design principles into technology assessment can also help to generate innovative solutions that are more sustainable, efficient, and effective. By looking to nature for inspiration, designers can create designs
Learn more about biomimetic design process from the given link
https://brainly.com/question/15290068
#SPJ1
in a prokaryotic cell, none of the trnas coding for arg are charged.
In a prokaryotic cell, the process of charging tRNAs with their corresponding amino acids is carried out by aminoacyl-tRNA synthetases.
These enzymes specifically recognize the tRNA molecule and the corresponding amino acid, and then catalyze the attachment of the amino acid to the tRNA. However, if none of the tRNAs coding for arginine are charged, it could indicate a deficiency or malfunction in the aminoacyl-tRNA synthetase responsible for charging those specific tRNAs. This could potentially lead to issues in protein synthesis and cellular function, as arginine is an essential amino acid needed for proper protein synthesis and various metabolic processes.
To know more about prokaryotic cell, click here:
brainly.com/question/29771587
#SPJ11
one of the functions of synovial fluid is to act as a shock absorber that distributes force evenly across the joint surface.
a. true
b. false
a. true. One of the functions of synovial fluid is to act as a shock absorber that distributes force evenly across the joint surface. Synovial fluid is a viscous substance found within synovial joints, and its primary function is to reduce friction between the joint surfaces during movement.
Additionally, it helps distribute force evenly, providing a cushioning effect and protecting the joint surfaces from damage. Synovial fluid is a clear, viscous liquid that is found in the cavities of synovial joints. It helps to reduce friction between the articular cartilage of the joint surfaces and acts as a lubricant during joint movement. In addition to lubrication, synovial fluid also helps to cushion and distribute forces evenly across the joint surface during movement, thereby reducing the risk of joint damage or injury.
Learn more about Synovial fluid here:
https://brainly.com/question/1927640
#SPJ11
A patient with suspected internal bleeding is admitted to the hospital. His systemic blood pressure is 80/50 mm Hg: his MAP = 60 mmHg. (N = 120/80, MAP = 93.). You may use the graph below to develop your answer. a. Predict the patient's GFR given his current systemic blood pressure. Justify your answer.
Based on the graph provided, a systemic blood pressure of 80/50 mmHg and a MAP of 60 mmHg is indicative of severe hypotension. This level of hypotension could result in decreased renal perfusion and a subsequent decrease in the patient's glomerular filtration rate (GFR).
In fact, studies have shown that patients with hypotension, particularly those with sepsis or internal bleeding, are at a higher risk for acute kidney injury (AKI) and decreased GFR. This is because the kidneys require adequate blood pressure and perfusion to maintain their filtration function.
Therefore, it is likely that the patient's GFR is significantly decreased due to his low systemic blood pressure and internal bleeding. Exact numbers for the patient's GFR would need to be determined through laboratory testing, but it is clear that the patient is in a critical state and requires immediate medical intervention to address the internal bleeding and restore adequate blood pressure and renal perfusion
Learn more about blood pressure here:
https://brainly.com/question/17085623
#SPJ11.