Explanation:
Many of the properties of organic molecules can be predicted based on the strength of their cohesive molecule-molecule interactions (i.e. how much the molecules want to stick together). The boiling point (BP) and melting point (MP) of an organic molecule is related to: 1) the molecular weight of the molecule and 2) the "stickiness" of individual molecules for their neighbors.
For example, molecules in a liquid are held together by attractive interactions between molecules. These interactions must be broken (by adding heat) in order to transition into the gas. The stronger the cohesive interactions, the more heat that is necessary for the liquid-to-gas phase transition. These same attractive molecule-molecule interactions have to be broken for a solid to liquid phase change.
Examples: (Rank the following molecules in terms of MP and BP.)
Introduction to intermolecular forces:
All of the attractive intermolecular forces are based on the electrostatic attraction of positive charges on one molecule with negative changes. The stronger the charges, the stronger the attraction between molecules.
How to:
In general, comparisons can only be made between molecules with similar formulas or molecular weights.* First, identify the functional groups in the molecules being compared. Each functional group can form different types of intermolecular interactions (see the chart above). Interactions higher up on the chart form stronger cohesive interactions and will have higher boiling points and melting points.
* Note that larger molecules usually have higher boiling points and melting points. This is not because of their higher molecular weights but because they usually have greater surface areas with which to form more intermolecular interactions. This is also why linear molecules tend to have higher MPs and BPs than branched (or more spherically shaped) molecules. Linear molecules will have more surface area than a more spherically shaped molecule.
All three molecules have approximately the same molecular formula and molecular weights. Only molecule A contains a strongly polarized or ionic functional group: an aldehyde. The C=O group in aldehydes generate a strong molecular dipole (partial + and - charges). Thus, it can form weak attractive dipole-dipole interactions, and A will have the highest boiling point and highest melting point in this series of compounds.
Molecules B and C are alkanes. They can only form the weakest attractive dispersion interactions between their molecular surfaces. Due to its long-thin shape, B will have a greater surface area and can form more dispersion interactions than the rounder C. Therefore, B will have a higher boiling point and melting point than C.
Molecule A is ionic (it has charges). Therefore, it can form the strongest ion-ion interactions and will have the highest boiling point and melting point.
Molecule B is a carboxylic acid with an acidic proton and basic lone pairs. Therefore, it can form medium strength hydrogen bonding interactions, and it will have the next highest boiling point and melting point.
Molecule C is a carboxylic ester, which is a polar functional group. However, it does not have an acidic proton. Therefore, esters cannot form hydrogen bonds with themselves. Instead, they can only form weak dipole-dipole interactions and will have the lowest boiling point and melting point in this series of compounds.
Answer:
Explanation:
By thinking about non covalent intermolecular interactions, we can also predict relative melting points. All of the same principles apply: stronger intermolecular interactions result in a higher melting point.
A 2.9 kg model rocket accelerates at 15.3 m/s2 with a force of 44 N. Before launch, the model rocket was not moving. After the solid rocket engine ignited, hot gases were pushed out from the rocket engine nozzle and propelled the rocket toward the sky.
Which of Newton’s laws apply in this example? Check all that apply.
Answer:
newton's firts law
Explanation:
because it states that everybody continue its state in rest unless an external force is appy to change its state from rest to motion.
Answer:
A, B, C
Explanation:
When is the potential energy transformed into kinetic energy?
When it is in motion, i.e no longer stopped
Explanation:
If a ball is lifted to a certain height, it gains potential energy. If it is then dropped, the potential energy is converted into kinetic energy as it looses height but gains speed.
Which gas is made from more than one element?
Mrs. Moran and Mr. Moran decided to move the cabinet in their dining room. Mrs.
Moran stood on one side, and Mr. Moran stood on the other. They each pushed
with 30 N of force. What was the net force on the cabinet?
Answer:
60N
Explanation:
The net force on the cabinet is 60N.
Net force is that single force that will act like all other forces on a body. The direction of the force and magnitude is very important when resolving forces.
Force applied by Mrs. Moran = 30N
Force applied by Mr. Moran = 30N
Since they each stood on both sides and pushed, the net force will be 30N + 30N = 60N
Answer: 0
Explanation: If they both pushed a force of 30N then it doesn’t add up but instead you subtract. so it’s 0. ur yw ;)
What Most Often Causes The Availability Of Water To Change?
A. type of plants
B. type of soil
C. local geography
Answer:the answer is C
Explanation:
Find the density of a 720.0 g block of Titanium with these dimensions: L = 10.0 cm, W = 8.0 cm, H = 2.0 cm
Identity the solution among the following mixture-air
Answer:
Air is composed of about 78% nitrogen, 21% oxygen, and 1% of other gasses like carbon dioxide
Explanation:
Brainly deleted my answer so I came back to answer this again :(
True or False: Neutrons have both a positive and negative charge
Answer:
false
Explanation:
Answer:
false
Explanation:
which of the following lists show the elements in order, from those having the least protons to those having the most protons in the atoms?
A. K, Mg, N, O
B. C, Al, P, Cl
C. Li, Be, H, He
D. Na, Ne, He, H
The elements that have least protons to those having the most protons in the atoms are:
B. C, Al, P, Cl
Protons in an atom:There is an equal number of protons and electrons in an atom. So when moving across a period in a periodic table the number of electrons increases which also shows the increases in a number of protons. So as the atomic number increases, the number of protons and electrons also increases.
Thus, the order of elements having least to greatest protons are:
C, Al, P, Cl
C has 6 atomic number, Aluminium has 13 atomic number , Phosphorus has 14 atomic number and atomic number of chlorine is 17.
Thus, option B is correct.
Find more information about Atomic number here:
brainly.com/question/1805828
Ayala is making salad dressing. She mixes oil and
vinegar in a blender until a smooth consistency is
formed. Explain whether this is a heterogeneous or a
homogeneous mixture and why.
Answer:
A heterogeneous mixture
Explanation:
A heterogeneous mixture is a mixture that is not uniform in composition. This means that we can tell that there is more than one component in the mixture. An example of a heterogeneous mixture would be milk and cereal.
The opposite is a homogeneous mixture, which is uniform in composition. An example of a homogeneous mixture is air. There are many different particles surrounding us, but we can't tell.
A salad dressing that consists of oil and vinegar is another example of a heterogeneous mixture. Its consistency is smooth, but oil and vinegar can't dissolve each other, which means that we will see droplets of oil and vinegar. Since we can tell that it contains these components, this is a heterogeneous mixture.
Answer:
Sample Response: A homogeneous mixture can only form when one of the substances can dissolve the other one. Oil and water cannot dissolve each other, so they must form a heterogeneous mixture with small particles of vinegar dispersed throughout the oil, yet not dissolved.
The independent variable is the variable that you measure.
True or False?
Answer:
Maybe false
Explanation:
.........
El plomo y el yodo forman dos compuestos. En uno, el porcentaje de en masa de plomo es del 44,94% y en el otro es de 62,02%. Calcula los gramos de plomo por gramos de yodo en cada compuesto
Answer:
0.8162 gramos de plomo por gramo de yodo
1.633 gramos de plomo por gramo de yodo
Explanation:
Asumiendo una base de 100 gramos para cada compuesto:
Primer compuesto:
Gramos plomo: 44.94g
Gramos de yodo: 100-44.94g = 55.06g
Así, la masa de plomo por gramos de yodo para el primer compuesto es:
44.94g plomo / 55.06g Yodo =
0.8162 gramos de plomo por gramo de yodo
Segundo compuesto:
Gramos plomo: 62.02g
Gramos de yodo: 100-62.02g = 37.98g
La masa de plomo por gramos de yodo para el segundo compuesto es:
62.02g plomo / 37.98g Yodo =
1.633 gramos de plomo por gramo de yodo
how to write the ionic formula for the K1+, MnO41- pair of ions
Answer:
Ionic formula: KMnO4
Explanation:
Pottasium permanganate (KMnO4) is an ionic compound that contains a combination of pottasium cations (K+) and permanganate anion (MnO4-). The pair of ions that make up the ionic compound cancel out each other to make it neutral.
K+ (aq) + MnO4- (aq) → KMnO4 (aq)
MnO4- contains 1 atom of manganese with a (+7) charge and four atoms of oxygen with a (-2) charge each. This forms a +7 for Mn and -8 for O4, hence, a net total of -1.
I need help with the bottom part of the paper
Answer:
ur really pretty :)
Explanation:
I need someones help
Answer:
y or z one of those two i think its z but im so sorry if im wrong if not z then try y also I learned this last year.
List the following particles in size order, from biggest to smallest?
A Molecules, electrons, atoms incorrect answer
B Atoms, molecules, electrons incorrect answer
C Electrons, atoms, molecules incorrect answer
D Molecules, atoms, electrons
Answer:
D. Molecules, atoms, electrons.
Explanation:
I did a quiz on this and got it right
Answer:
D. Molecules, atoms, electrons.
Explanation:
i did the test trust i got it right
Select all that apply. Choose the chemical formulas that are matched with their
correct name.
MgF2, magnesium (II) fluoride
BeO, beryllium oxide
NaCl, sodium chloride
AlF3, aluminum trifluoride
CaCl2, calcium chloride
Answer:
i think just these
NaCl
CaCl2
when a substance melts the kinetic energy
A Decreases then increase
B Decrease
C Stays the same
D Increase
Answer:
C stays The same.
Is the answer.
Microwave warming Popcorn is a  example of
A. Conduction
B. Convection
C. Radiation
D. None of these
Answer:
A
Explanation:
Ttu67j5ri76tio5777t65y75ircyjutfjgtfv
HELP!!!!!! WILL MARK BRAINLIEST!!!
Fill in the blank.
Atoms are held together in molecules by _______.
_______ are compounds with the same chemical formula but different molecular structures.
A/An _______ indicates the ratio of atoms in a molecule.
_______ are similar to molecular formulas but show how atoms are bonded together.
When two atoms of the same element combine to form a molecule, this is called a _______ molecule.
The breaking and forming of bonds between atoms in substances results in changes in the _______ contained in the substances.
Respond to the following based on your reading.
Give two purposes for the systematic naming of chemicals.
Name the elements in the molecule H2SO4 and tell how many atoms of each element are present.
How many molecules are represented by 3CO2?
Answer:
1. Covalent Bond
2. Isomers
3. Molecular and Empirical Formula
4. The Structural Formula
5. Diatomic Molecules
1. Hydrogen and Tetraoxosulphate. There are 2 atoms of hydrogen and 4 atoms of tetraoxosulphate.
Explanation:
Sorry, I wrote all I know
The chemical equation represents a reaction between ammonia and oxygen to form nitrogen monoxide and water. 4 N H 3 ( g ) + 5 O 2 ( g ) → 4 NO ( g ) + 6 H 2 O ( g ) What is the limiting reagent when a 4.50 g sample of ammonia is mixed with 15.80 g of oxygen?
The limiting reagent : NH₃
Further explanationA method that can be used to find limiting reactants is to divide the number of moles of known substances by their respective coefficients, and small or exhausted reactants become a limiting reactant
Reaction
4NH₃(g)+5O₂(g)⇒4NO(g)+6H₂O(g)
mol NH₃ :
[tex]\tt \dfrac{4.5}{17}=0.265[/tex]
mol O₂ :
[tex]\tt \dfrac{15.8}{32}=0.494[/tex]
mol ratio
NH₃ :
[tex]\tt \dfrac{0.265}{4}=0.06625[/tex]
O₂ :
[tex]\tt \dfrac{0.494}{5}=0.0988[/tex]
Limiting reactants : NH₃ (smaller ratio)
The limiting reagent when a 4.50 g sample of ammonia is mixed with 15.80 g of oxygen is NH₃
Calculation of limiting reagent:The limiting reactant refers to the reactant that gets consumed first in a chemical reaction and thus it limits how much product can be created or developed. A method that can be used to determine limiting reactants that to divide the number of moles by their respective coefficients.
So,
For mol NH₃ :
[tex]= 4.5\div 17[/tex]
= 0.494
For mol O₂ :
[tex]= 15.8 \div 32[/tex]
= 0.494
For mol ratio
NH₃ :
[tex]= 0.265 \div 4[/tex]
= 0.06625
O₂ :
[tex]= 0.494 \div 5[/tex]
= 0.0988
Based on the above calculations we can say that it is NH₃
learn more about the oxygen here: https://brainly.com/question/19803828
Why do atoms form bonds with other atoms?
SELECT ALL THAT APPLY
a
To ensure that both atoms in the bond have eight total
electrons.
b To obey the octet rule.
С
To fill the outer electron shells of both atoms.
d
To achieve a more stable electron configuration for both
atoms.
The smallest unit that combines chemically or physically to form molecules and compounds is called an atom. They are composed of electrons and protons and neutrons in the nucleus.
The correct answer is:
Option d. To achieve a more stable electron configuration for both atoms.
This can be explained as:
Atoms do not always bond to complete eight electrons in their shells.Atoms do not react to follow the octet rule.Electrons don't need to be filled in the shells of atoms of both the shells as some atoms lose electrons too.Therefore to achieve stable configuration atoms bond with other atoms.
To learn more about atoms and stability follow the link:
https://brainly.com/question/7615695
please show the work :(What is the estimated force applied to the box if the acceleration is .40 m/s2?
force (N) acceleration (m/s2)
10 .20
? .40
Answer:
20N
Explanation:
Given parameters:
Force(N) Acceleration(m/s²)
10 0.2
? 0.4
Unknown:
The force applied when the acceleration is 0.4m/s²
Solution:
From newton's second law of motion;
Force = mass x acceleration
Since we are using the same box, let us find the mass of the box;
Force = mass x acceleration
10 = mass x 0.2
mass = [tex]\frac{10}{0.2}[/tex] = 50kg
Now,
The force in the second instance will be;
Force = 50 x 0.4 = 20N
An atom of an element has 2 electrons in the 1st energy level and 5 on the 2nd energy level what element is it ?
the element is nitrogen
5+2=7
help me out plz!!!!
What mass of NO2 can be produced when 678 mL of oxygen at STP and 256 grams of NH3 are mixed together?
Answer:
WHT55
Explanation:
i experianced this before
Which property do metalloids share with nonmetals?
Answer:
Both can react to form acidic compunds. Both are brittle.
Explanation:
PLEASE HELP!!!!!! SpongeBob Scientific Method Practice
Mr. Krabbs wants to make Bikini Bottoms a nicer place to live. He has created a
new sauce that he thinks will reduce the amount of bodily gas that comes out after
eating krabby patties from the Krusty Krab. He brings in 100 customers that
always have gas problems. He has 50 of them (Group A) eat krabby patties with
the new "Gas-free" sauce. The other 50 (Group B) eat krabby patties with sauce
that looks just like the Gas-free sauce but is really the old sauce with food
coloring. Both groups were told that they were getting Gas-free sauce. Two
hours after eating the krabby patties, 30 customers in Group A reported having fewer
gas problems and 2 customers in Group B reported having fewer gas problems.
I
1. What is Krusty Krab's hypothesis? Krusty Krab's hypothesis is that he thinks his
new sauce will reduce the amount of bodily gas that comes out after eatin
Answer:
The hypothesis is that the new sauce used in hamburgers will be able to reduce the incidence of body gases in customers.
Explanation:
A hypothesis is an assumption about a specific topic that is being researched. In the case shown in the question above, Krusty Krab believes that the new sauce he wants to use in hamburgers is capable of reducing the amount of body gases created by the body. Krusty Krab wanted to do scientific research where he analyzed the efficiency of this new sauce, but he assumes that the new sauce is efficient in reducing the creation of these gases. This is a hypothesis.
What is the best explanation of an organelle?
An organelle is a structure within the cytoplasm of a eukaryotic cell that is enclosed within a membrane and performs a specific job. Although ribosomes are not enclosed within a membrane, they are still commonly referred to as organelles in eukaryotic cells.
Answer: A organelle is a structure within the cytoplasm of a eukaryotic cell that is enclosed within a membrane and performs a specific job and although ribosomes are not enclosed within a membrane, they are still commonly referred to as organelles in eukaryotic cells.
Here is a model of the sun earth system at a certain point in earths orbit around the sun based on the model which statement best explains my point is is experiencing summer
Answer:
the earth is tilted towards the sun
Explanation:
In the context, there is a sun and earth system and at a certain point when the earth is moving in its orbit around he sun, some point on the earth experiences the summers season. This is because at this point of the earths revolution, the point on the earth is facing the sun and is also tilted towards the sun. So at this point the sun rays fall directly at the surface. While the place which is tilted away from the sun, experiences winter season.
Answer:
Earth's northern hemisphere is tilted toward the Sun.