HELP PLS

HELP PLS

HELP PLS

HELP PLS

HELP PLS

HELP PLS

HELP PLS

HELP PLS

HELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLS

Answers

Answer 1

Explanation:

Refer the explanation in the picture

HELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLSHELP PLS

Related Questions

explain why the ir thermal image of the heated plate at a uniform temperature looks different in temperature scales

Answers

Due to gradient difference ir thermal image of the heated plate at a uniform temperature looks different in temperature scales

In order to clarify field studies pertaining to animal ecology, thermal imaging is a very effective remote sensing technique for a variety of reasons. A wide range of platforms, including land, water, and air-based vehicles, are used to collect thermal imaging data in real time at the speed of light. It is superior to visible imaging technologies because it can detect animals in a wide range of typically problematic atmospheric conditions because thermal radiation can penetrate smokes, aerosols, dust, and mists more effectively than visible radiation. It is a completely passive imaging method that works in both daylight and darkness. As a result, there are fewer disruptions and stressful disturbances to wildlife while data collection is taking place. Because it contrasts the emissivity of the animal with its background rather than comparing temperatures, it can detect animals that are colder, warmer, or the same temperature as their background.

To study about remote sensing -

https://brainly.com/question/10839378

#SPJ4

a ball has a diameter of 3.81 cm and average density of 0.0835 g/cm3. what force is required to hold it completely submerged under water?

Answers

Force required to hold ball completely submerged under water is calculated as 0.257 N.

What is buoyant force?

Net upward force on any object in any fluid is called buoyant force . If buoyant force is greater than the object's weight, then the object will rise to the surface and float.

Given, ρ1 = 0.0835 g/cm3  and ρ2 =1g/cm3)

and radius = 3.81/2 cm = 1.9 cm

As, the volume of sphere = 4/3 π r3

and mass of sphere = 4/3 π r3 ρ1

So, weight of the sphere is 4/3 π r3 ρ1 g

Volume of water displaced = 4/3 π r3

As we know, buoyant force = 4/3 π r3 ρ2 g

= 4/3 π  * 1.9 * (1-0.0835) *9.81

= 257.66 * 10^-3

F = 0.257 N

Force required to hold it completely submerged under water is 0.257 N

To know more about buoyant force, refer

https://brainly.com/question/11884584

#SPJ4

1. What is the atomic mass of the new atom?
2. What is the atomic number of the new atom?
3. What is the symbol of the new atom?
4. What type of decay is demonstrated here?

Answers

1. The atomic mass of the new atom be 252. Option (d) is correct.

2. The atomic number of the new atom be 100. Option (j) is correct.

3. The symbol of the new atom be Fm.  Option (e) is correct.

4. Beta decay is demonstrated here. Option (g) is correct.

What is Beta decay?

A proton can change into a neutron or vice versa inside the radioactive sample's nucleus through a process known as beta decay. The radioactive sample's nucleus can approach the ideal neutron/proton ratio as closely as feasible through processes like beta decay and alpha decay.

The nucleus releases a beta particle during this process, which can either be an electron or a positron. Keep in mind that a proton can become a neutron or a neutron can become a proton. To follow the law of charge conservation, electron and positron are created. The weak contact that leads to beta-decay.

Learn more about Beta decay here:

https://brainly.com/question/25455333

#SPJ1

Energy is an essential part of our daily lives, but the resources that power the earth are being threatened. Imagine a world where people didn't know how to generate energy. What do you think that world might be like? describe your answer in 4-6 sentences.

Answers

If we are not able to produce energy anymore, civilization would come to a stand still.

What is energy?

We know that the term energy has to do with the ability to do work. Thus we know that a lot of the processes that occur on the earth does require energy so that it would be able to occur.

Energy has become the pivot of modern civilization. Without the ability to produce energy, we can not be able to have a comfortable life and life on the earth would be found to become quite unbearable.

Learn more about energy:https://brainly.com/question/716903

#SPJ1

for a closed universe ( ), is the angular diameter distance monotonic? for an open universe ( ), is the angular diameter distance monotonic?

Answers

Simply said, open and closed are infinite or finite. Its critical density is a factor for the geometry. The cosmos is closed (limited) and positively curved like the surface of a ball if the density parameter is larger than 1.

This expansion is supposed to occur at a constant rate in flat geometry. Acceleration is caused by dark energy.According to general relativity, the geometry of space, or its flatness, is directly related to the mass density, hence as space expands, the geometry becomes flatter. Think of space as a balloon's surface. The balloon's surface becomes increasingly flatter as you blow it up. This occurs in three dimensions in space.When we return to our geometry and mass density relationship as space flattens, we discover that the density is pushed toward critical density.

Since space expands exponentially during inflation, it is really pushed extremely swiftly toward critical density, which explains why we are so close to the critical mass density.

To know more about open and closed

https://brainly.com/question/16555796

#SPJ4

For a closed universe, the angular diameter distance is not monotonic. This is because in a closed universe, the expansion rate is decelerating due to the gravitational pull of matter, causing light to bend and curve as it travels through the universe.

This curvature effect can cause the apparent size of objects to vary as a function of their distance, leading to a non-monotonic angular diameter distance.

On the other hand, for an open universe, the angular diameter distance is monotonic. This is because in an open universe, the expansion rate is accelerating due to dark energy, causing light to travel in straight lines and maintaining a constant relationship between the physical size of an object and its angular size as it moves further away. Therefore, the angular diameter distance increases monotonically with distance in an open universe.

To know more about monotonic, visit:

https://brainly.com/question/29587651

#SPJ1

Which condition would exist for the length of day and night to be equal all year long

Answers

Answer:

the Equionox

Explanation:

there are only teo times of the year when the earths axis

is tilted neither toward nor away from the sun, resulting on a nearly equal amount of daylight and darkness at all latitudes. these events are referred to as equionoxes

stars with more than 15 times the mass of our sun usually evolve from the main sequence to red giants

Answers

Stars with a mass greater than 15 times that of the sun typically transition directly from the hr diagram to the red giant stage while maintaining a nearly constant luminosity.

Constant means what?

A quantity that is supposed not to shift value in a particular mathematical debate is one that has a specific amount in a specific context, is true globally, or is a feature of some material or instrument.

What symbol represents a constant?

A digit (0–9) or a period serves as the initial of a constant sign. A constant symbol's value cannot be altered. It is merely the string made up of the symbol's characters, all lowercase alphabetic characters having been converted to uppercase.

To know more about constant visit:

https://brainly.com/question/1597456

#SPJ4

unpolarized light is passed through two successive polaroid filters, each with its transmission axis at 45.0° to the preceding filter. what percentage of light energy gets through?

Answers

The amount of light that passes through the three Polaroid filters in order is 12.5%.

Does "light" imply "not heavy"?

Light is an adjective that describes something that isn't weighty, cumbersome, or depressing. A conversation topic or a music piece are both examples of things that can be considered light. The weight is light even though the trip is long, for instance.

Angle of transmission axis; θ = 45°

Formula for intensity of light from first polarizer is;

I₁ = ¹/₂I₀

Formula for intensity of light from second polarizer is;

I₂ = I₁cos²θ

Formula for intensity of light from third polarizer is;

I₃ = I₂cos²(90 - θ)

Combining the 3 equations;

Put ¹/₂I₀ for I₁ in second formula to get;

I₂ = ¹/₂I₀cos²θ

Put ¹/₂I₀cos²θ for I₂ in third formula to get;

I₃ = ¹/₂I₀cos²θ*cos²(90 - θ)

Plugging in 45° for θ gives;

I₃ = ¹/₂I₀cos²45*cos²(90 - 45)

⇒ I₃ = ¹/₂I₀cos²45*cos²45

⇒ I₃ = ¹/₂I₀cos⁴45

Now, cos 45 in surd form is 1/√2. Thus;

I₃ = ¹/₂I₀(1/√2)⁴

I₃ = ¹/₂I₀(¹/₄)

I₃ = ¹/₈I₀

I₃/I₀ = ¹/₈

I₃/I₀ = 0.125

In percentage form, we have;

I₃/I₀ = 12.5%

Why is light such an effective symbol?

Light is a universally recognized metaphor for knowledge and rational reasoning; it is the antithesis of darkness or ignorance. The dark is almost usually thought to be ominous and dangerous, connected with things that cannot understand. According to legend, light dispels darkness and creates order from chaos.

To know more about light  visit:

https://brainly.com/question/15200315

#SPJ4

Two identical objects go around circles of identical diameter, but one object goes around the circle twice as fast as the other. The centripetal force required to keep the faster object on the circular path is.

Answers

Answer:

a

Explanation:

a stone is thrown straight upwards with a velocity of 6.38 m/s, starting from 1.63 m above the ground. how long does it take the stone to reach the ground? g

Answers

The time taken for the stone to reach the ground when it is thrown above the ground is 0.57 s.

Given that,

Velocity of the stone = 6.38 m/s

Height above the ground = 1.63 m

The time t at which the stone's vertical position y(t) becomes zero is the amount of time it takes for it to fall to the earth.

It is given by the formula, y(t) = 1.63 - 1/2* 9.81* t² = 0

1.63 - 4.9 t² = 0

4.9 t² = 1.63

t² = 1.63/4.9 = 0.33

t = 0.57 s

Thus, the time taken by the stone to reach the ground is 0.57 s.

To know more about time:

https://brainly.com/question/9825474

#SPJ4

what minimum volume must the slab have for a 42.0 kg woman to be able to stand on it without getting her feet wet?

Answers

0.525 m³ minimum volume must the slab have for a 42.0 kg woman to be able to stand on it without getting her feet wet.

How do you find the minimum volume?

Add the biggest possible inaccuracy to each metric, then multiply to get the biggest volume you can. Subtract the largest potential mistake of each measurement, then multiply, to determine the smallest volume that can be produced.

Briefing:

1000 kg/m³ = density of water

920 kg/m³ = density of ice

BF = Woman Weight + Slab Weight

Pvg = 42 + Pvg

V = 42 kg / (1000 - 920)

V = 42 / 80

V = 0.525 m³

To know more about Minimum volume visit:

https://brainly.com/question/28555971

#SPJ4


Determine the distance a 741.19 W crane lifts a crate in 57.59 s if it uses a force of 546,422.14 N.

Answers

The distance at which the crane lift a crate is 0.0781 m.

What is distance?

Distnace is the lenght between two points.

To determine the distance the crane can lift the crate, we use the formula below.

Formula:

d = Pt/F.......................... Equation 1

Where:

d = DistanceP = Powert = TimeF = Force

From the question,

Given:

P = 741.19 Wt = 57.59 sF = 546422.14 N

Substitute these values into equation 1

d = (741.19×57.59)/546422.14d = 0.0781 m

Hence, the distance is 0.0781 m.

Learn more about distance here: https://brainly.com/question/26550516

#SPJ1

A 0. 25-kilogram baseball is thrown upward with a speed of 30. Meters per second. Neglecting friction, the maximum height reached by the baseball is approximately.

Answers

Answer:46m

Explanation:

2. Calculate the acceleration of a school bus when a force of 2000 N is applied. The mass is
1000 kg.

Answers

Answer:

2m/s square

Explanation:

this means force is the product of mass and acceleration.so a=f/mA=2000N/1000kg A=2m/s squarewhere a is acceleration f is force and m is mass

Michael uses his bike to apply 494 N to himself and the bike by pedaling as he approaches a 1.9 m tall ramp which is 3.4 m away. What work does the Michael do on himself and the bike he is riding?

Answers

Here is the answer for ur question

If a kiloparsec (kpc) is equal to 1000 parsecs, how many light years is a kiloparsec
equal to?
(1 point)
O 3, 260 light years
O 3.26 light years
O 3 million light years
O 2, 260 light years

Answers

If a kiloparsec (kpc) is equal to 1000 parsecs, light years is a kiloparsec equal to: 3, 260 light years.

What is light years?

The distance that light travels in a light-year is one year. At 186,000 miles (300,000 kilometres) per second and 5.88 trillion miles (9.46 trillion kilometres) per year, light travels through interstellar space.

Since a light-year is the maximum distance light can travel in one year and nothing can move faster than that, the answer appears to be 13.8 billion light-years.

Thus, 3,260 many light years is a kiloparsec.

To know more about light year refer to:

https://brainly.com/question/76984

#SPJ1

how are the waves generated in the spectrum​

Answers

By radioactive atoms and in nuclear explosions.

hat is the volume rate of flow of water from a 1.90- cmcm -diameter faucet if the pressure head is 10.0 mm ?

Answers

With a pressure head of 13.0 m and a 1.90 cm diameter tap, the volume rate of water flow is about. 3.97 × 10⁻³m³/s.

Given:

The faucet's diameter (d) is 1.90 cm (0.019 m).

Pressure head (h) = 13.0 m

The formula for the volume rate of flow (Q) through a pipe or faucet is given by:

Q = A × v

The radius of the faucet (r) is half of the diameter:

r = d / 2 = 0.019 / 2 = 0.0095 m

The cross-sectional area of the circular opening is given by:

A = π × r²

v = √(2 × g × h)

v = √(2 × 9.81 × 13.0)

v = √(254.46)

v = 15.95 m/s

Now, we have both A and v. Let's calculate the volume rate of flow (Q):

Q = A × v

Q = π × (0.0095)² × 15.95

Q = 3.97 × 10⁻³m³/s

With a pressure head of 13.0 m and a 1.90 cm diameter tap, the volume rate of flow of water is therefore about. 3.97 × 10⁻³m³/s.

To know more about the volume rate of flow:

https://brainly.com/question/13385366

#SPJ12

The complete question is:

What is the volume rate of flow of water from a 1.90- cm -diameter faucet if the pressure head is 10.0 mm?

An accelerator laboratory is considering using a solid-state detector as part of a high-energy experiment. What would be an advantage of using a solid-state detector?.

Answers

A solid-state detector converts part of the energy of the particles directly into electric current.

What is a solid-state detector?

A semiconductor detector also known as a solid-state detector in ionizing radiation detection is a device that uses a semiconductor generally silicon or germanium to measure the effect of incident particles  (charged) or photons.

Semiconductor detectors have broad applications for gamma and X-ray spectrometry, radiation protection, and particle detectors. Solid-state detectors are sensitive to charged particles and are transparent to gamma rays.

Solid-state detectors offer a signal by collecting the charge released in the passage of the particle through a semiconductor. In these detectors, a semiconductor material such as a silicon (Si) or germanium (Ge) crystal constitutes the detecting medium.

Learn more about solid-state detector, here:

https://brainly.com/question/29730091

#SPJ1

What is the current through this circuit?

Answers

Answer: 1.25 A

Explanation:

I = R/V  (Ohm's Law)

I = 150 Ω / 120 V = 1.25 A

In this scenario a battery is used to supply chemical potential energy. The potential energy is transformed and produces kinetic energy. The battery causes a fan to spin and that kinetic energy can also be described as mechanical energy. Check out the values for each: 100 J potential energy results in 75 J of kinetic energy. What conclusion can be drawn from the energy transformation diagram?
Responses
A The chemical potential energy is transformed into 75J of kinetic energy and 25J of heat energy.The chemical potential energy is transformed into 75J of kinetic energy and 25J of heat energy.
B The energy transformation results in 25J of energy being lost.The energy transformation results in 25J of energy being lost.
C The 100J of chemical potential energy releases 25J as friction and 75J of mechanical energy. The 100J of chemical potential energy releases 25J as friction and 75J of mechanical energy.
D Not all of the chemical potential energy is converted; 25J remains as potential energy.

Answers

The conclusion that can be drawn from the energy transformation diagram is "the chemical potential energy is transformed into 75J of kinetic energy and 25J of heat energy".

option A is the correct answer.

What is the law of conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.

This implies that energy is always conserved as it be converted from one form of energy to another. Such as;

Potential energy to kinetic energyKinetic energy to potential energyChemical energy to electrical energyElectrical energy to chemical energyElectrical energy to heat energyElectrical energy to light energy, etc

In the given scenario such that 100 J of  potential energy is transformed to produce kinetic energy and the battery causes a fan to spin using 75 J of kinetic energy converted from the 100 J of potential energy.

We can conclude the following based on the given scenario;

energy conversion takes placesenergy is conservedall the potential energy is converted into kinetic energythe remaining energy (25 J) is converted into other form of energythe possible form of energy of the 25 J is heat

Learn more about energy conservation here: https://brainly.com/question/166559

#SPJ1

A rubber block weighing 40.0 newtons is resting on a horizontal level surface of dry concrete. What is the magnitude of the minimum force needed to start the rubber block moving across the dry concrete?

Answers

The minimum force to start the block moving is 40N

What is limiting frictional force?

Limiting friction occurs when the moving force and the force opposing motion are equal,any addition to the moving force will cause slipping. The limiting frictional force is proportional to the normal reaction between the contacting surfaces and is independent of the area of contact.

Therefore for an object to be stationary, the moving force is equal to force opposing it. In these scenario the minimum force to move a stationary object must be equal to the weight of the object. The weight of the object is 40N.

Therefore the minimum force to move the block is 40N.

learn more about limiting frictional force from

https://brainly.com/question/11371672

#SPJ

which statement is true about the relationship between hubble's constant and the age of the universe? which statement is true about the relationship between hubble's constant and the age of the universe? the larger the value of hubble's constant, the slower the universe is expanding and the older the universe must be. the larger the value of hubble's constant, the faster the universe is expanding and the younger the universe must be. the larger the value of hubble's constant, the slower the universe is expanding and the younger the universe must be. there is no relationship between the value of hubble's constant and the age of the universe.

Answers

The correct statement is:

"The higher the value of the Hubble constant, the faster the universe is expanding and the younger it should be."

The Hubble's constant, named after American astronomer Edwin  Hubble, is a measure of the expansion rate of the universe. It is defined as the ratio of the speed at which a galaxy is moving away from an observer to its distance from the observer. We can use this constant to calculate the age of the universe by estimating how long it took the universe to reach its current size.

The higher the Hubble constant, the faster the galaxies are moving away from each other. This means that the universe is also expanding faster, so it should be younger. Conversely, a small value of the Hubble constant means that the universe is expanding slowly, and therefore must be older.

Read more about the Hubble's constant at:

brainly.com/question/29910845

#SPJ4

A block is dropped on to
the track and bounces back
to the dropping point.

Is energy conserved or not?

Answers

Answer: yes

Explanation:

storms in the south pacific can create waves that travel all the way to the california coast, which are 12,000 km away. how long does it take them if they travel at 18.3 m/s?

Answers

we may estimate that the storm's effects will last for about 9.3 days.

We were informed that a wave is produced in the south pacific ocean. Additionally, these phrases produce waves that have a 15 m/s speed and can travel 12,000 kilometres. These waves, which are produced in the southern Pacific, can travel this far. Therefore, we simply utilise the standard equation that T equals distance times speed at the time of combat. Therefore, we must translate this distance into metres. Thus, 12,000 times 1000 is greater than 15. As Pete lacks seconds, the results are revealed. Thus, this can be expressed as eight times ten, increased to five seconds. So let's convert to our words first. Therefore, in terms of us, we will find that this equals to ours be 222 points. In order to determine the approximate number of days, we need to divide the amount by 24. 9.3 approximately Therefore, we may estimate that the storm's effects will last for about 9.3 days.

to know more about seconds, visit to:-

https://brainly.com/question/11879335

#SPJ4

Car 1 has a body made from aluminium and car 2 has a body made from steel. Which car is likely to be more prone to corrosion?.

Answers

The car that will be more prone to corrosion is the aluminium car (Car1)

What is corrosion?

Corrosion is when a refined metal is naturally converted to a more stable form such as its oxide, hydroxide or sulphide state this leads to deterioration of the material.

Most metals are easily oxidized I.e they tend to lose electrons to oxygen or other substances in the air or in water. As oxygen is reduced (gains electrons), it forms an oxide with the metal.

Both aluminium and steel do not rust but steel has better edge to aluminium in resistance to corrosion because steel has chromium which gives it a protective film and excellent corrosion resistance. Moreover steel is non porous substance.

Therefore the aluminum car will be more prone to corrosion.

learn more about corrosion from

https://brainly.com/question/678507

#SPJ1

Supose 1.3 Kg of water are heated from 20 °C to 80 °C. How much energy was transferred to the
water?(Water Specific heat capacity is 4184 J/Kg-°C).

Answers

Answer:

Q = (80 - 20) deg C * 1.3 kg * 4184 J / (deg C kg) = 326,000 Joules

How fast would a 0.40 kg football have to be thrown to have a momentum of 8 kg m/s?

Answers

20 m/sec fast would a 0.40 kg football have to be thrown to have a momentum of 8 kg m/s.

What is momentum?

It is measured by "mass velocity," since momentum depends on velocity, and it also depends on the direction of the body's motion. Since velocity and mass are both scalar quantities, momentum is also a vector quantity.

Given that,

mass of football (m) = 0.40 kg

momentum (p) = 8 kg.m/sec

As we know,

p = mv

8 kg.m/sec = 0.40 kg × v

v = (8 kg.m/sec ÷ 0.40 kg)

v = 20 m/sec

Now, 20 m/sec fast would a 0.40 kg football have to be thrown to have a momentum of 8 kg m/s.

To know more about momentum refer to:

https://brainly.com/question/1042017

#SPJ1

star formation occurs in the halo rather than the disk because there is more visible material in the halo. true false

Answers

Star formation occurs in the halo rather than the disk because there is more visible material in the halo this statement is false. The galaxy's disk, which is mostly made of gas, is where stars are formed.

What environment is star creation in?

Formation of stars. Molecular clouds, which are relatively dense collections of interstellar gas and dust, are where stars are born. These areas are quite chilly (temperature about 10 to 20K, just above absolute zero). Gases become molecular at these temperatures, which means that atoms are bound together. As a result of the disk's abundance of gas and dust, vigorous star formation occurs there. The spiral arms of the galaxy are where stars develop.

What distinguishes our galaxy's halo and disk populations of stars?

All the gas and the young stars are in the disk, but there are also some ancient stars. An aggressive core and elderly stars dominate the bulge. Globular clusters and extremely ancient stars can be found in the halo. An indication of how the Galaxy formed can be found in the cause of this division of star kinds.

To know more about star formation visit

brainly.com/question/14996479

#SPJ4

Question 13 of 25
Which of the following changes would make a heat engine waste more
energy as heat?
OA. A decrease in its exhaust temperature
OB. An increase in work done
OC. A decrease in randomness
OD. A decrease in its operating temperature

Answers

Answer:

D. A decrease in its operating temperature

Other Questions
Solve the system of linear equations by substitution -5x+6y=-11 6y=x+5 Simplify each ratio. Make sure to convert the units when needed6 hours: 4 days (Hint: There are 24 hours each day.) Mulroney Corp. is considering two mutually exclusive projects. Both require an initial investment of $10,000 at t = 0. Project A has an expected life of 2 years with after-tax cash inflows of $6,000 and $7,900 at the end of Years 1 and 2, respectively. Project B has an expected life of 4 years with after-tax cash inflows of $4,300 at the end of each of the next 4 years. Each project has a WACC of 8%. Use the replacement chain approach to determine the NPV of the most profitable project.$4,325 the following solutions are prepared by dissolving the requisite amount of solute in water to obtain the desired concentrations. rank the solutions according to their respective osmotic pressures in decreasing order assuming the complete dissociation of ionic compounds. I need help quick please some students want to calculate the work done by friction as an object with unknown mass moves along a straight line on a rough horizontal surface. the students have a force probe, a meterstick, and a stopwatch. which of the following will allow the students to take the measurements needed to calculate the work done by friction? If the variable x has the original value of 3.4, what is the value in x after the following?cout (x); 5 Forces of 25 N and 40 N act on an object in the directions shown25N40NWhich arrow shows the direction of the resultant force on the object?KB Al, Bill, Dill, and Will ate some apples. Each of them ate a differentnumber of apples, and each of them ate at least two apples. However,their father ate even more than they ate together; he ate 15. (Maybethey were rather small apples!) Could one of the boys have eaten more than five apples? After the last Ice Age ended, Earth's temperatures rose. As the climate warmed, many nomads moved into areas with a mild climate and fertile land. Another historical revolution then occurred. For the first time, people began staying in one place to grow grains and vegetables. In what ways does Shake-spears sonnet explore the theme of the nature of Love? A golfer is enjoying a day out on the links.What maximum height will a 329.7 m drivereach if it is launched at an angle of 22.0to the ground? The acceleration due to gravityis 9.81 m/s^2.Answer in units of m. nurses and members of other health disciplines at a state's public health division are planning programs for the next 5 years. the group has made the decision to focus on diseases that are experiencing the sharpest increases in their contributions to the overall death rate in the state. this team should plan health promotion and disease prevention activities to address what health problem? the hospital accreditation visitors are present on the nursing unit. what nursing actions will protect client privacy during the visit? select all that apply. What is the relationship between a 90% confidence interval around a mean and a 95% confidence interval around a mean?. operations managers at all-metal corporation have found that they can achieve efficient production only by having very large quantities of steel available at all times. this indicates that all-metal uses a(n) production process. Literal Equations help asap !! Given triangle ABC with m What holy text outlines moral guidelines and the history of islam for its followers?. In triangle XYZ, mY = 62.45 and mZ = 41.8. Determine the measure of the exterior angle to X. 104.25 75.75 37.85 18.94