Answer:
i am not sure but
Explanation:
b and c should be correct
Answer:b and D
Explanation:
Why do we use Scientific Notation?
Answer:
Scientific Notation was developed in order to easily represent numbers that are either very large or very small. As you can see, it could get tedious writing out those numbers repeatedly. So, a system was developed to help represent these numbers in a way that was easy to read and understand: Scientific Notation.
Explanation:
Answer:
Working with very large or small quantities usually ends up being quite complicated. Scientific notation is a way to write numbers in an abbreviated way, making it easier to work with these numbers.
Explanation:
How does more greenhouse gases in the Earth's atmosphere affect earth's temperature?
Explanation:
Greenhouse gasses in Earth's atmosphere affect Earth's temperature by making it hotter. Greenhouse gasses make the Earth warmer by trapping heat. You can think of greenhouse gasses as Earth's blanket.
Answer:
It effects the earth when we have more greenhouse gasses in the earth's atmosphere because it makes the earth more warmer which will cause more sunlight to hit earth because there is more heat near the earth's surface, and this will cause the temperatures to rise really high because of the heat.
Hope this helps!
Which explains how to balance the equation ZnSO4 + Li2CO -> ZnCO3 + Li2SO4 ?
A. One reactant and one product needs the coefficient 2.
B. The products both need a 3 coefficient.
C. The reactants both need a 2 coefficient.
D. Atoms in the equation are already balanced.
Explanation:
Atoms in the equation are already in balance.
Answer:
it is d, got it right on EDG
Explanation:
A substance X reacts with ammonium nitrate to produce a gas that turns damp red litmus paper blue. X must therefore be:
a) A salt
b) A catalyst
c) An alkali
d) An acid
Answer:
option C is correct
Explanation:
litmus paper turns red in acidic solution and turns blue in alkaline solution and turns purple in neutral solution
method used to separate ethanol from propanol
What mass of sulphuric acid can be made from 8g of SO3
(SO3+H2O==>H2S04)
09.8g
18.2g
Answer:
10 g H₂SO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
Given: 8 g SO₃
RxN: SO₃ + H₂O → H₂SO₄
Step 2: Identify Conversions
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H - 1.01 g/mol
Molar Mass of SO₃ - 32.07 + 3(16.00) = 80.07 g/mol
Molar mass of H₂SO₄ - 2(1.01) + 32.07 + 4(16.00) = 98.09 g/mol
Step 3: Stoichiometry
[tex]8 \ g \ SO_3(\frac{1 \ mol \ SO_3}{80.07 \ g \ SO_3} )(\frac{1 \ mol \ H_2SO_4}{1 \ mol \ SO_3} )(\frac{98.09 \ g \ H_2SO_4}{1 \ mol \ H_2SO_4} )[/tex] = 9.80042 g H₂SO₄
Step 4: Check
We are given 1 sig fig. Follow sig fig rules and round.
9.80042 g H₂SO₄ ≈ 10 g H₂SO₄
Please help me
What will oxygen likely do to complete its outermost shell, based on the Lewis dot diagram shown?
accept electrons
accept some electrons and give up other electrons
move electrons from the inner shell to the outer shell
give up electrons
Answer:
A. Accept electrons
Explanation:
The octet rule states that 8 electrons stabilizes a molecule. This means that oxygen will try to fill the two empty spots with electrons from other molecules. The Lewis Dot diagram shows these two empty spots with the empty circles at the bottom.
Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Here 'O' accepts electrons. The correct option is A.
The electrical structures of the elements, especially the electron pairings, are reflected in the Lewis dot structures. Lewis structures can be viewed as "electron bookkeeping" and are a helpful approach to condensing some bonding-related information. Each dot in a Lewis dot structure corresponds to 1 electron.
Group 6 member oxygen still requires two additional electrons to complete its outer shell and remain stable. According to the octet rule, an object needs 8 valence electrons in the outer shell to be stable.
Thus the correct option is A.
To know more about Lewis dot diagram, visit;
https://brainly.com/question/34127343
#SPJ6
Find the mass (in grams) of 1.5 moles of BaSO4
Answer:
350 g BaSO₄
General Formulas and Concepts:
Chemistry - Stoichiometry
Reading a Periodic TableUsing Dimensional AnalysisExplanation:
Step 1: Define
1.5 mol BaSO₄
Step 2: Identify Conversions
Molar Mass of Ba - 137.33 g/mol
Molar Mass of S - 32.07 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of BaSO₄ - 137.33 + 32.07 + 4(16.00) = 233.4 g/mol
Step 3: Convert
[tex]1.5 \ mol \ BaSO_4(\frac{233.4 \ g \ BaSO_4}{1 \ mol \ BaSO_4} )[/tex] = 350.1 g BaSO₄
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
350.1 g BaSO₄ ≈ 350 g BaSO₄
Balancing Chemical Equations method3- the algebraic method
Answer:
Write a different letter coefficient in front of each compound in the equation. Write algebraic expressions or rules for each element that equate its atoms on the LHS and RHS. Substitute the values into the other rules to obtain the balancing coefficients
Explanation:
12) A 17.92 g sample of copper was submerged in water, and the volume reading rose by 2.00 mL. What is the density of the copper sample?
Hey there!:
Mass = 17.92 g
Volume = 2.00 mL
Density = ??
Therefore:
D = m / V
D = 17.92 / 2.00
D = 8.96 g/mL
Hope this helps!
The density of an object is obtained as the ratio of mass of an object to its volume.
In science, density is defined as mass per unit volume. The volume of an object is the same as the volume of water displaced by the object.
Since the volume of water rose by 2.00 mL, then the volume of copper is 2.00 mL.
The density is now; mass/volume
Mass = 17.92 g
Density = 17.92 g/2.00 mL
= 8.96 g/ml
Learn more; https://brainly.com/question/24386693
8. Which type of element requires the least amount of energy to remove an electron?
Answer:
nonmetals
Explanation:
CHEM ASSIGNMENT!!
PLEASE HELP
Answer:
Explanation:
q=mcat
q= 50g(4.184)(100-100)
q = 0
do you think the mass of the products after the chemical reaction would be greater than, less than, or the same as the mass of the reactants before the chemical reaction?
It will be the same, as explained by conservation of mass.
hope this helped!
In geotropism, give examples of a positive and a negative response in a seedling?
Answer:
I don't know that question answer because I am in 7 class so mind it
Answer:
Positive Geotropism means growth of the plants towards the Gravitational force. e.g.It means When a plant's root grows towards Gravitational force . It is positive geotropism. Negative Geotropism means growth of the plant against the Gravitational force. e.g. When a plant's steam grows towards sunlight.
Explanation:
A large rift valley can be found along the east coast of Africa. It has been slowly widening over time, and it is now wide enough to contain many large lakes.
Which of these best explains the slow widening of this rift valley over time?
Group of answer choices
Earth's rotation
wind and water erosion
the Moon's gravitational pull
lithospheric plate movement
Answer:
wind and water erosion
Answer:
C is the answer
What did the Curies demonstrate by studying pitchblende?
A- Uranium is not the only radioactive element.
B- All elements are potentially radioactive.
C-Radium can cause anemia, bone and tissue damage, and death.
D-Uranium salts emit something that can expose photographic film.
Answer:
A- Uranium is not only the radioactive element
PLEASE HELP ASAP I EILL GIVE 100 POINTS!!! Kristy is on the track team. She runs the one kilometer race by going four times around the circular track. How does Kristy velocity change.
A. Her velocity changes countinually since her direction constantly changes
B. Her velocity depends on only on how she paces herself during the race
C. Her velocity is the same as her speed
D. Her speed changes at the same rate as velocity
Answer:A
Explanation:
What types of elements- metals,
nonmetals, or metalloids require
the most energy to remove an
electron?
Why do these elements have a higher ionization energy?
Answer:
Noble gases
Explanation:
The noble gases are non-metals that requires the highest amount of energy to remove an electron from their shells.
The reason for this difficult is that their electronic configuration confers a stable configuration them.
The ionization energy is the energy required to remove the most loosely held electrons in an atom. Due to the special stability of noble gases, it is very difficult to remove electrons from an atom of noble gases.state the iupac name for CH₃(CH2)₃C(CH₃)₃
Answer:
CH3CH2COCl consists of three carbon atoms in the parent chain and chloroformyl group(-COCl). Therefore the name of the compound is Propanoyl chloride.
2. Atoms of 160, 170, and 180 have the same number of
Have the same number of protons but a different number of neutrons
Further explanationThe elements in nature have several types of isotopes
Isotopes are atoms whose no-atom has the same number of protons while still having a different number of neutrons.
So Isotopes are elements that have the same Atomic Number (Proton)
SO the Three Common Isotopes Of Oxygen :
₈¹⁶O, ₈¹⁷O, and ₈¹⁸O have :
1. The same number of protons = atomic number = 8
2. Have a different number of neutrons :(neutrons= mass number-atomic number)
₈¹⁶O : neutron = 16-8=8
₈¹⁷O : neutron = 17-8=9
₈¹⁸O : neutron = 18-8=10
Atoms of two different elements must have different
Answer:
Atoms of two different elements must have different atomic numbers.
Explanation:
Water vapor particles are most likely to phase change into liquid particles If the vapor particles come into contact with:
a cold surface
Ono surface
a warm surface
O any surface at all - the temperature of the surface does not matter
Answer:
A cold surface I think.
Explanation:
Can you calculate the energy needed to increase the temperature of 100kg of iron by 40°C?
Answer: 177600 J or 177.6kJ
Explanation:
For this problem, we need to use q = mcAT
we have m = 10000, and AT= 40. The specific heat of iron is 0.444.
So now we can plug it in: q = 10000*.444*40 = 177600 J or 177.6kJ
Answer:
1848000J
Explanation:
Given parameters:
Mass of iron = 100kg
Temperature change = 40°C
Unknown:
Energy needed to increase the temperature = ?
Solution:
The amount of energy needed is given by the expression below:
H = m C Δt
m is the mass
c is the specific heat capacity
Δt is the change in temperature
c for iron is 462J/kg°C
Now insert the parameters and solve;
H = 100 x 462 x 40 = 1848000J
Which chemical equation below is balanced to follow the Law of Conservation of Mass?
H2 + Cl2 + HCl
o 2 H2 + Cl2 + 3 HCI
2 H2 + 2Cl2 → 2 HCI
H2 + Cl2 → 2 HCI
Answer:
Balanced Equation
H₂ + Cl₂ → 2HCI
Answer:
Balanced Equation
H₂ + Cl₂ → 2HCI
Explanation:
i did it and 100%
9. 1.2 x 102 yd =
10. 1535 fl. oz. =
L
Answer:
9. 122.4 yards
10. 45.395 litres
what are cons of viruses ?????? oh dont mind this i jus gotta get this out of my head dont stop pop tht pop tht mhm jus like tht mhm shake it shake it mhm work it work it!!!!!!!!!!!
Answer:
Viruses can weaken your immune system. They make you sick. Some could even cause death.
Explanation:
I hope this helped I heard that song I forgot the name lol
1000 cm3 of Helium has a mass of 178.5 grams. What is the density of Helium gas?
Answer:
The answer is 0.18 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{178.5}{1000} \\ = 0.1785[/tex]
We have the final answer as
0.18 g/cm³Hope this helps you
Critical thinking : Place an unmagnetized piece of iron in a magnetic field (eg iron filings near a magnet). Why is it attracted to the magnet?
Magnets attract iron due to the influence of their magnetic field upon the iron. Before a piece of iron enters the magnet, the polarization of the irons atoms is random. When exposed to the magnetic field, the atoms begin to align their electrons with the flow of the magnetic field, which makes the iron magnetized as well. This, in turn, creates an attraction between the two magnetized objects. This is why a piece of iron that is exposed to a magnet becomes magnetic for some time afterward.
pt Which of the following is an example of potential energy?
A. a rolling ball
B. a turning windmill
C. a compressed spring
D. a moving train
Answer:
C . a compressed spring
Drag the images into the correct category.
Contact Forces
Noncontact Forces
Answer:
Where are the categories, we need an image for reference or something to better understand the question