Given the molecular formula and 13C NMR data (in ppm) below, deduce and draw the structure of the unknown compound. The type of carbon, as revealed from DEPT spectra, is specified in each case. C4H6 30.2 (CH2), 136.0 (CH)

The transition metal ion with the electron configuration [Ar]4s0 3d7 is Mn²⁺, and it has 25 electrons.

To identify the transition metal ion and the number of electrons with the electron configuration [Ar]4s0 3d7,

1. Identify the core electron configuration: [Ar] represents the electron configuration of argon, which has 18 electrons.
2. Count the number of valence electrons: In this case, 4s0 has 0 electrons, and 3d7 has 7 electrons.
3. Add the core and valence electrons to find the total number of electrons: 18 (core) + 7 (valence) = 25 electrons.

The element with 25 electrons is manganese (Mn). However, since it's a transition metal ion, we need to identify the charge of the ion. The electron configuration of the neutral Mn atom is [Ar]4s2 3d5. Comparing this with the given electron configuration [Ar]4s0 3d7, we see that 2 electrons are missing from the 4s orbital. This indicates a +2 charge on the Mn ion.

To know more Electron Configuration:

https://brainly.com/question/29416284

#SPJ11

Adding sodium hydroxide to lead(II) nitrate results in the formation of white lead(II) hydroxide precipitate; Safety precautions should be taken due to the corrosive and toxic nature of the substances involved.

When sodium hydroxide (NaOH) is added to lead(II) nitrate (Pb(NO₃)₂), a precipitation reaction occurs. The balanced chemical equation for the reaction is:

2 NaOH(aq) + Pb(NO₃)₂(aq) → Pb(OH)₂(s) + 2 NaNO₃(aq)

This reaction shows that two moles of sodium hydroxide react with one mole of lead(II) nitrate to form one mole of lead(II) hydroxide (Pb(OH)₂) and two moles of sodium nitrate (NaNO₃).

The formation of a precipitate of lead(II) hydroxide (Pb(OH)₂) indicates that the reaction has occurred. The white solid of lead(II) hydroxide should be visible in the test tube.

It is important to note that both sodium hydroxide and lead(II) nitrate are corrosive and toxic substances, so proper safety precautions should be taken when handling them. Gloves and eye protection should be worn, and the experiment should be performed in a well-ventilated area.

Learn more about Balanced chemical equation

brainly.com/question/28294176

#SPJ11

The common ion effect is the phenomenon responsible for a decrease in solubility of a salt when one of the salt's ions is already present in solution.

The common ion effect occurs when a salt's solubility decreases because one of the ions in the salt is already present in the solution. This effect is due to the Le Chatelier's principle, which states that if a system at equilibrium is disturbed, it will try to counteract the disturbance to re-establish equilibrium. In this case, the addition of a common ion shifts the equilibrium towards the solid state, reducing the concentration of ions in solution and decreasing the solubility of the salt. This effect is particularly important in precipitation reactions, where the addition of a common ion can cause a solid to form, and in buffer solutions, where the common ion can affect the pH of the solution. In physiological processes, the common ion effect can affect the absorption and excretion of ions in the body.

Know more about common ion effect here:

https://brainly.com/question/28202991

#SPJ11

When dissolving KHP, using 20 ml of distilled water instead of 50 ml has the following effect: The molarity of the NaOH that you calculate will be too low. The correct answer is option d.

The molarity of a solution is a measure of the concentration of that solution, defined as the number of moles of solute dissolved in one liter of solution. It is expressed in units of moles per liter (mol/L), or sometimes as "M".

When you use less water to dissolve the KHP, the solution becomes more concentrated. During the titration process, the more concentrated KHP solution will require less volume of NaOH to reach the endpoint. As a result, when calculating the molarity of the NaOH, you would get a value that is lower than the actual molarity.

Therefore option d is the correct answer.

Learn more about endpoint  here:

https://brainly.com/question/15892951

#SPJ11

The correct option is D) Convert the alkoxide to the alcohol, and then allow it to eliminate, forming the dye.

Hydrochloric acid must be added in order to dissolve any remaining Grignard reagent and transform the magnesium alcoholate into alcohol. The dimethylamino group would also be protonated if the pH level was too low, making the end product far more water soluble.

It is possible to count the halogen atoms in a halogen compound using Grignard reagents. For the chemical examination of several triacylglycerols as well as numerous cross-coupling reactions for the synthesis of various carbon-carbon and carbon-heteroatom linkages, Grignard degradation is employed.

To know more about alkoxide visit:-

https://brainly.com/question/31413844

#SPJ1

a) C5H8 + 7O2 --> 5CO2 + 4H2O
b) CH3CH=CHCH3 + Br2 --> CH3CHBrCHBrCH3
c) 6HNO3 + C6H6 --> 6NO2 + 2H2O + C6H3(NO2)3
d) C6H5CH2CH3 + H2SO4 --> C6H5CH2CH2HSO4 + H2O

With the molecular formula C6H6, benzene is an aromatic hydrocarbon that is colorless, extremely flammable, and volatile. It is a naturally occurring substance that is present in both natural gas and crude oil. Plastics, synthetic fibers, rubber, and colours are just a few examples of the many compounds that can be made from benzene. Long-term exposure to benzene, a highly poisonous and carcinogenic material, can result in major health issues, such as leukaemia and other types of cancer. It can contribute to the creation of ground-level ozone and smog, both of which have detrimental effects on both human health and the environment. It is also a volatile organic compound (VOC).

Learn more about benzene here:

https://brainly.com/question/24835328

#SPJ11

The number of moles of acid (total) in the commercial aspirin sample is 0.003245 mol, calculated by adding the moles of NaOH used in two trials, where the molarity of NaOH was assumed to be 0.100 M.

To determine the number of moles of acid in the commercial aspirin CA1 sample, we need to first calculate the number of moles of NaOH used in the titration. We can use the following equation:

moles of NaOH = Molarity of NaOH x volume of NaOH used (in L)

Assuming the molarity of NaOH is 0.100 M, we can calculate the moles of NaOH used in each trial as follows:

Trial #1:

moles of NaOH = 0.100 mol/L x 0.01637 L = 0.001637 mol

Trial #2:

moles of NaOH = 0.100 mol/L x 0.01608 L = 0.001608 mol

Since the reaction between NaOH and aspirin is a 1:1 stoichiometric ratio, the number of moles of acid (aspirin) in each trial is equal to the number of moles of NaOH used. Therefore, the number of moles of acid in each trial is:

Trial #1:

moles of acid = 0.001637 mol

Trial #2:

moles of acid = 0.001608 mol

So the number of moles of acid (total) in the commercial aspirin CA1 sample for both trials is 0.001637 mol + 0.001608 mol = 0.003245 mol.

Learn more about Number of moles

brainly.com/question/21085277

#SPJ11

Since NO and NO₂ have a molar ratio of 1:1, 3.66 x 10²⁵ moles of NO are needed.

It shows how many atoms or molecules make up one gramme of an element's or compound's molecular weight. The result is 6.022 x 10²³ when the atomic mass of an element is divided by the actual mass of its atom.

The balanced chemical equation indicates: 2 NO + O₂ → 2 NO₂

1 mole of O₂ and 2 moles of NO₂ combine to form 2 moles of NO₂. The molar ratio of NO to NO₂ is thus 2:1, or just 1:1. Accordingly, one mole of NO₂ is created for every mole of NO that is utilised.

Therefore, the amount of NO₂ in moles is:

7.32×10²⁵ NO₂ molecules / 2 = 3.66×10²⁵ moles of NO₂

To know more about molecules visit:-

https://brainly.com/question/19922822

#SPJ1

The genetic link to sodium benzoate is not yet fully understood, as there is no clear dominant/recessive trait and studies have provided mixed results. Further research is needed to clarify the relationship and identify other contributing factors.

There is no clear evidence to suggest a direct genetic link or a clear dominant/recessive trait related to sodium benzoate. While some studies have suggested that certain genetic variations may affect an individual's sensitivity to sodium benzoate, more research is needed to confirm these findings and to determine the underlying mechanisms involved.

Additionally, other factors such as diet, lifestyle, and environmental exposures may also play a role in an individual's response to sodium benzoate.

Learn more about Dominant trait

brainly.com/question/20744588

#SPJ11

Finally, we can use the following relationship to determine the solution's pH: pH + pOH = 14 pH = 14 - pOH = 14 - 2.41 ≈ 11.59 The 0.750 M NaCN solution therefore has a pH of about 11.59. The pH of a sodium cyanide (NaCN) solution is 12.10.

The pH of a 0.1N KCN solution is 11, and both potassium cyanide (KCN) and sodium cyanide (NaCN) are basic chemicals. Most of the cyanide ions (CN-) are changed into HCN when these alkaline salts are neutralised. Cyanide exits as HCN at pH 8,93%; at pH 7,99%, it is HCN (Towill et al.

To know more about sodium cyanide, click here:

https://brainly.com/question/30463329

#SPJ4

Approximately 3.93 g of benzoic acid would need to be dissolved in 350.0 mL of water to produce a solution with a pH of 2.85.

To calculate the mass of benzoic acid needed to prepare a solution with a pH of 2.85, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the desired pH, pKa is the acid dissociation constant of benzoic acid (6.3 × 10^-5), [A-] is the concentration of the benzoate ion, and [HA] is the concentration of benzoic acid.

At pH 2.85, the concentration of [A-]/[HA] is 0.316.

We can assume that the concentration of benzoic acid in water is equal to its solubility limit, which is approximately 0.34 g/100 mL at room temperature.

Therefore, we can set up the following equation to solve for the mass of benzoic acid needed:

0.316 = 10^(2.85-4.2) = [A-]/[HA]

0.316 = [C7H5O2^-] / [C7H5O2H]

0.316 = x / (0.34 g/100 mL * 350.0 mL)

Solving for x gives:

x = 0.316 * (0.34 g/100 mL * 350.0 mL)

x = 3.93 g

Therefore, approximately 3.93 g of benzoic acid would need to be dissolved in 350.0 mL of water to produce a solution with a pH of 2.85.

Learn more about benzoic acid ,

https://brainly.com/question/24052816

#SPJ4

the decomposition of 4.21 g nahco3 yields 2.07 g [tex]Na_{2} CO_{3}[/tex].The percent yield of this reaction is 77.94%.

To calculate the percent yield of the decomposition reaction of [tex]NaHCO_{3}[/tex]to [tex]Na_{2} CO_{3}[/tex], you'll need to follow these steps:
Step 1: Determine the balanced chemical equation for the decomposition reaction:
2  [tex]Na_{2} CO_{3}[/tex]→  [tex]Na_{2} CO_{3}[/tex] +[tex]H_{2} O[/tex] + [tex]CO_{2}[/tex]
Step 2: Calculate the theoretical yield:
Find the molar mass of  [tex]NaHCO_{3}[/tex]: (1 × 22.99) + (1 × 1.01) + (1 × 12.01) + (3 × 16.00) = 84.01 g/mol
Find the molar mass of [tex]Na_{2} CO_{3}[/tex]: (2 × 22.99) + (1 × 12.01) + (3 × 16.00) = 105.99 g/mol
Find the moles of  [tex]NaHCO_{3}[/tex]: 4.21 g / 84.01 g/mol = 0.0501 mol
Using the balanced equation, 2 moles of  [tex]NaHCO_{3}[/tex]produce 1 mole of  [tex]Na_{2} CO_{3}[/tex], so the moles of  [tex]Na_{2} CO_{3}[/tex] produced: 0.0501 mol / 2 = 0.02505 mol
Calculate the theoretical yield of  [tex]Na_{2} CO_{3}[/tex]: 0.02505 mol × 105.99 g/mol = 2.655 g
Step 3: Calculate the percent yield:
Percent yield = (Actual yield / Theoretical yield) × 100
Percent yield = (2.07 g / 2.655 g) × 100 = 77.94%
The percent yield of this reaction is 77.94%.

learn more about decomposition here

https://brainly.com/question/19607269

#SPJ11

the decomposition of 4.21 g nahco3 yields 2.07 g [tex]Na_{2} CO_{3}[/tex].The percent yield of this reaction is 77.94%.

To calculate the percent yield of the decomposition reaction of [tex]NaHCO_{3}[/tex]to [tex]Na_{2} CO_{3}[/tex], you'll need to follow these steps:
Step 1: Determine the balanced chemical equation for the decomposition reaction:
2  [tex]Na_{2} CO_{3}[/tex]→  [tex]Na_{2} CO_{3}[/tex] +[tex]H_{2} O[/tex] + [tex]CO_{2}[/tex]
Step 2: Calculate the theoretical yield:
Find the molar mass of  [tex]NaHCO_{3}[/tex]: (1 × 22.99) + (1 × 1.01) + (1 × 12.01) + (3 × 16.00) = 84.01 g/mol
Find the molar mass of [tex]Na_{2} CO_{3}[/tex]: (2 × 22.99) + (1 × 12.01) + (3 × 16.00) = 105.99 g/mol
Find the moles of  [tex]NaHCO_{3}[/tex]: 4.21 g / 84.01 g/mol = 0.0501 mol
Using the balanced equation, 2 moles of  [tex]NaHCO_{3}[/tex]produce 1 mole of  [tex]Na_{2} CO_{3}[/tex], so the moles of  [tex]Na_{2} CO_{3}[/tex] produced: 0.0501 mol / 2 = 0.02505 mol
Calculate the theoretical yield of  [tex]Na_{2} CO_{3}[/tex]: 0.02505 mol × 105.99 g/mol = 2.655 g
Step 3: Calculate the percent yield:
Percent yield = (Actual yield / Theoretical yield) × 100
Percent yield = (2.07 g / 2.655 g) × 100 = 77.94%
The percent yield of this reaction is 77.94%.

learn more about decomposition here

https://brainly.com/question/19607269

#SPJ11

To determine which liquid is which among the two blue solutions (CuSO4 and Cu(NO3)2) and two clear choices (NH4OH and CaCl2), follow these steps:

Step 1: Identify the colors of the given solutions:

- CuSO4 (copper sulfate) is a blue solution.
- Cu(NO3)2 (copper nitrate) is also a blue solution.
- NH4OH (ammonium hydroxide) is a colorless or clear solution.
- CaCl2 (calcium chloride) is a colorless or clear solution.

Step 2: Match the solutions with their respective colors:

- The two blue solutions are CuSO4 and Cu(NO3)2.
- The two clear choices are NH4OH and CaCl2.

Answer: The two blue solutions are copper sulfate (CuSO4) and copper nitrate (Cu(NO3)2), while the two clear choices are ammonium hydroxide (NH4OH) and calcium chloride (CaCl2).

https://brainly.com/question/22595955

#SPJ11

Note that the missing part CD in the kite is 5

Given Kite ABCD

To find the lenght of CD

We know that, in a kite, the diagonals are perpendicular.

Thus,

Using Pythagoras Theorem,

CD² = 3² + 4²
CD = 9² + 16²

CD² = 25
√CD = 5 Units

The missing lenght of CD is 5

Learn more about Kite:
https://brainly.com/question/26679673
#SPJ1

Full Question:

See attached image.

The molecular geometry around the central bromine atom in BrF4- is trigonal bipyramidal.

In the BrF4- ion, the central bromine atom is bonded to four fluorine atoms and has one lone pair of electrons. To determine the electron pair arrangement around the central bromine atom using the VSEPR (Valence Shell Electron Pair Repulsion) model, we need to first draw the Lewis structure of the molecule:

Bromine (Br) has 7 valence electrons, while each fluorine (F) atom has 7 valence electrons. The negative charge on the ion (-1) indicates the addition of an extra electron, so there are a total of 36 valence electrons (7 + 4(7) + 1 = 36).

The Lewis structure of BrF4- can be represented as:

F F

| |

F--Br--F

| |

F -

where "-" represents the lone pair of electrons on the Br atom.

Using the VSEPR model, we can determine the electron pair arrangement around the central bromine atom by considering both the bonding pairs and the lone pair of electrons. In this case, there are 5 electron pairs around the central bromine atom (4 bonding pairs and 1 lone pair). The electron pair geometry is therefore trigonal bipyramidal.

However, we also need to consider the molecular geometry, which takes into account only the position of the atoms around the central atom (not the lone pair of electrons). The bonding pairs in BrF4- are all bonded to the central atom, so the molecular geometry is the same as the electron pair geometry.

learn more about VSEPR model here:

https://brainly.com/question/29022281

#SPJ11

Okay, let's evaluate the options to determine which half-cell will result in a positive cell potential when combined with the Cu2+/Cu half-cell:

1. Fe2+/Fe3+: This half-cell converts Fe2+ ions to Fe3+ ions. The standard cell potential for Fe2+/Fe3+ is +0.77 V. When combined with the Cu2+/Cu half-cell, the overall cell potential will be +0.77 V - E°Cu2+/Cu = +0.77 V - 0.34 V = +0.43 V. This is a positive value, so Fe2+/Fe3+ will work.

2. Ag/Ag+: The standard cell potential for Ag/Ag+ is +0.80 V. Combined with Cu2+/Cu, the cell potential would be +0.80 V - 0.34 V = +0.46 V. This is also positive, so Ag/Ag+ can be used.

3. Sn2+/Sn: The standard cell potential for Sn2+/Sn is -0.14 V. Combined with Cu2+/Cu, the cell potential would be -0.14 V - 0.34 V = -0.48 V. This is negative, so Sn2+/Sn will not result in a positive cell potential.

In summary, the half-cells that will work with Cu2+/Cu to give a positive overall cell potential are:

1. Fe2+/Fe3+

2. Ag/Ag+

Sn2+/Sn will give a negative potential and cannot be used.

Does this make sense? Let me know if you have any other questions!

Yes, the pH of a buffer solution of potassium hydroxide ([tex]K_{O}H[/tex]) can decrease when exposed to air overnight, depending on the specific conditions. Buffer solutions are made by mixing a weak acid and its corresponding conjugate base, or a weak base and its corresponding conjugate acid, in order to maintain a relatively constant pH when small amounts of acid or base are added to the solution.

However, when a buffer solution is exposed to air overnight, it can undergo changes that affect its pH. For example, carbon dioxide ([tex]Co_{2}[/tex]) from the air can dissolve in the buffer solution to form carbonic acid ([tex]H_{2} Co{3}[/tex]), which can react with the weak base in the buffer and decrease its concentration, leading to a decrease in pH. Additionally, if the buffer solution is not stored properly, it may undergo bacterial or fungal growth, which can alter the pH by producing acidic or basic compounds.

Therefore, while a buffer solution of potassium hydroxide is generally resistant to changes in pH, it is still possible for its pH to decrease when exposed to air overnight, depending on the specific conditions of the environment.

To know more about buffer solution

brainly.com/question/24262133

#SPJ11

The pH of a solution that is 0.20 M HOCl and 0.90 M KOCl can be determined using the Henderson-Hasselbalch equation.

The pKa of HOCl is 3.1, which means that the pH of the solution should be around 3.1.

In order for the buffer to have pH=pKa, HCl needs to be added. The quantity of HCl required to reach the desired pH can be determined using the Henderson-Hasselbalch equation.

In this case, the quantity of HCl needed to be added to 1.0L of the original buffer to reach pH=pKa would be 0.05 moles of HCl. Adding HCl to the buffer will shift the equilibrium to the left, resulting in increased concentration of HOCl and decreased concentration of KOCl.

This will decrease the pH of the buffer and bring it closer to the desired pH=pKa.

Know more about Henderson-Hasselbalch here

https://brainly.com/question/13423434#

#SPJ11

The balanced equation for the decomposition of barium peroxide (BaO2) is 2 BaO2 → 2 BaO + O2 . This means that for every 2 moles of BaO2 that decompose, 1 mole of O2 is formed. Therefore, if 0.500 moles of BaO2 decompose, the number of moles of O2 formed would be: 0.500 moles BaO2 × (1 mole O2 / 2 moles BaO2) = 0.250 moles O2

The balanced equation for the decomposition of barium peroxide (BaO2) is 2 BaO2 → 2 BaO + O2, which indicates that 2 moles of BaO2 decompose to yield 2 moles of barium oxide (BaO) and 1 mole of oxygen gas (O2). This means that the mole ratio between BaO2 and O2 is 2:1.

If we have 0.500 moles of BaO2 that decompose, we can use this mole ratio to calculate the number of moles of O2 formed. By multiplying 0.500 moles of BaO2 by the conversion factor of 1 mole O2 per 2 moles BaO2 (from the balanced equation), we can determine the amount of O2 produced:

0.500 moles BaO2 × (1 mole O2 / 2 moles BaO2) = 0.250 moles O2

Therefore, 0.500 moles of BaO2 would yield 0.250 moles of O2 through the decomposition reaction according to the balanced equation.

Learn more about barium peroxide here:

https://brainly.com/question/188392

#SPJ11

Carbonic acid (H2CO3) is a weak, diprotic acid that forms when carbon dioxide (CO2) dissolves in water. It is an important compound in the carbon cycle and plays a significant role in regulating the pH of natural water systems, including the ocean.

In the base-catalyzed anhydride hydrolysis reagent, the gaseous by-product given off is carbon dioxide (CO2). This occurs as the proton-transfer reaction between sodium bicarbonate and the tetrahedral intermediate [RCO2CO-(OH)R] forms a dicarboxylate. Upon the addition of hydrochloric acid during the work-up, carbonic acid (H2CO3) is formed, which then decomposes into water (H2O) and carbon dioxide (CO2). Carbonic acid has a pKa of 6.35 and is a weak acid involved in various chemical reactions and equilibria in natural systems, such as the carbonate buffering system in water.

To know more about Carbonic acid please refer: https://brainly.com/question/13929437

#SPJ11

This equation can be used to determine the specific change in Gibbs free energy:

ΔG° = ΔH° - TΔS°

where,

T is the temperature in Kelvin,

H is the standard change in enthalpy, and

S is the standard change in entropy.

The thermochemical table can be used to determine the standard enthalpy of reaction (H°) and the standard entropy (S°) of a reaction.

The H and S values ​​for the given reaction are as follows on the basis of normal conditions:

ΔH° = -483.6 kJ/mol

ΔS° = -202.4 J/(mol·K)

Note that the units for S° are J/(molK), which are different from the units for H°. To be used in the above equation, S° must first be converted to kJ/(mol K). Therefore,

ΔS° = -0.2024 kJ/(mol·K)

When we plug the values ​​into the equation, we get:

Consequently, the standard change in Gibbs free energy of the reaction at 25 °C is -423.3 kJ/mol.

Learn more about Gibbs free energy, here:

https://brainly.com/question/20358734

#SPJ1

Your question is incomplete, most probably the complete question is:

Calculate the standard change in Gibbs free energy for the following reaction at 25°C?

[tex]3H_2(g)+ Fe_2O_3 ------ > 2Fe (s)+ 3H_2O(g)[/tex]

A real gas does not completely obey the predictions of the kinetic-molecular theory. This is because the kinetic-molecular theory assumes that gas particles have negligible volume and no intermolecular forces.

which is not always the case for real gases. Real gases also exhibit molecular interactions and can be condensed under certain conditions. However, real gases still exhibit diffusion, as gas particles are able to move and spread out through space.

As a result, real gases may deviate from the ideal gas behavior, which assumes no intermolecular forces and negligible volume of gas particles. Real gases can also diffuse, but their rate of diffusion may be influenced by the gas's molecular properties.

To know more about diffusion click here

brainly.com/question/10532944

#SPJ11

If the Grignard reagent is found in excess, one mole of aldehyde will react with one mole of the reagent. The number of moles that will react with other compounds listed depends on their specific chemical structure.

To determine the number of moles that will react with one mole of the following, consider the reactions of Grignard reagent (GR) with different functional groups:
1. Ketone: One mole of ketone reacts with one mole of Grignard reagent to form a tertiary alcohol.
2. Aldehyde: One mole of aldehyde reacts with one mole of Grignard reagent to form a secondary alcohol.
3. Ester: One mole of ester reacts with two moles of Grignard reagent to form a tertiary alcohol and one mole of alkoxide.
4. Diester: One mole of diester reacts with four moles of Grignard reagent to form a tertiary alcohol and two moles of alkoxide.
5. Acid: Grignard reagents cannot be used directly with acids, as they will react with the acidic proton and generate the corresponding alkane.
So, the number of moles reacting with one mole of each are:
- Ketone: 1 mole of GR
- Aldehyde: 1 mole of GR
- Ester: 2 moles of GR
- Diester: 4 moles of GR
- Acid: Cannot react directly with GR

To learn more about Grignard reagent click here https://brainly.com/question/30144052

#SPJ11

The three different systematic (IUPAC) names for the same compound are:

1. 5-bromo-2-hydroxytoluene

2. 4-bromo-1-hydroxy-2-methylbenzene

3. 4-bromo-2-methylphenol

The IUPAC nomenclature is the set of rules for naming the organic compounds as per the International Union of Pure and Applied Chemistry.

To know more about IUPAC nomenclature, click on the below link:

https://brainly.com/question/30086566

#SPJ11

The reactions are: (A) Addition reaction of alkenes: CH₂=CH₂ + HBr → CH₃-CH₂Br (B) Hydrogenation: CH₂=CH₂ + H₂ (Pt catalyst) → CH₃-CH₃;  HC≡CH + H₂ (Lindlar's catalyst) → CH₂=CH₂; HC≡CH + NaNH₂ (in NH₃) → trans-CH=CH (C) Addition reaction of alkynes: HC≡CH + HBr → CH₂=CHBr

A. Addition reaction of alkenes: In this reaction, a reagent is added to an alkene, breaking the double bond and forming a single bond. One of the most common reagents used in alkene addition reactions is HBr.

Example: CH₂=CH₂ + HBr → CH₃-CH₂Br

B. Hydrogenation: This is the process of adding hydrogen (H₂) to an unsaturated hydrocarbon (alkenes or alkynes) in the presence of a catalyst such as Pt, Lindlar's catalyst, or Na/NH₃. The double or triple bond is broken, and the resulting product is a saturated hydrocarbon.

1. Hydrogenation with Pt:
Example: CH₂=CH₂ + H₂ (Pt catalyst) → CH₃-CH₃

2. Hydrogenation with Lindlar's catalyst (used for alkynes to alkenes):
Example: HC≡CH + H₂ (Lindlar's catalyst) → CH₂=CH₂

3. Hydrogenation with Na/NH₃ (used for alkynes to trans-alkenes):
Example: HC≡CH + NaNH₂ (in NH₃) → trans-CH=CH

C. Addition reaction of alkynes (not repeating hydrogenation reactions used in B): A common addition reaction for alkynes is the hydrohalogenation, where a hydrogen halide (like HBr) is added to the triple bond, resulting in an alkene with a halogen atom attached.

Example: HC≡CH + HBr → CH₂=CHBr

To learn more about alkynes, visit: https://brainly.com/question/29654692

#SPJ11

The gas that effuses slowest is carbon dioxide. This is because effusion is the escape of a gas through a small hole or opening, and the rate of effusion is inversely proportional to the square root of the molar mass of the gas.

Carbon dioxide has a molar mass of 44.01 g/mol, which is higher than that of nitrogen (28.01 g/mol) and carbon monoxide (28.01 g/mol), but lower than that of chlorine (70.91 g/mol) and fluorine (38.00 g/mol). Therefore, carbon dioxide will effuse slower than nitrogen and carbon monoxide, but faster than chlorine and fluorine.

The gas that effuses slowest among the options provided is chlorine. This is because effusion rate is inversely proportional to the square root of the molecular mass, according to Graham's Law of Effusion. Chlorine has the highest molecular mass (70.9 g/mol) among the listed gases, resulting in a slower effusion rate compared to the others.

Visit here to learn more about carbon dioxide brainly.com/question/3049557

#SPJ11

The gas that effuses slowest is carbon dioxide. This is because effusion is the escape of a gas through a small hole or opening, and the rate of effusion is inversely proportional to the square root of the molar mass of the gas.

Carbon dioxide has a molar mass of 44.01 g/mol, which is higher than that of nitrogen (28.01 g/mol) and carbon monoxide (28.01 g/mol), but lower than that of chlorine (70.91 g/mol) and fluorine (38.00 g/mol). Therefore, carbon dioxide will effuse slower than nitrogen and carbon monoxide, but faster than chlorine and fluorine.

The gas that effuses slowest among the options provided is chlorine. This is because effusion rate is inversely proportional to the square root of the molecular mass, according to Graham's Law of Effusion. Chlorine has the highest molecular mass (70.9 g/mol) among the listed gases, resulting in a slower effusion rate compared to the others.

Visit here to learn more about carbon dioxide brainly.com/question/3049557

#SPJ11

Yes, water molecules can evaporate. Evaporation is a physical process where a liquid turns into a gas, and it occurs when the molecules of the liquid gain enough energy to break free from their bonds and escape into the air. When water is exposed to air, some of its molecules will gain enough energy to evaporate and become water vapor in the atmosphere. This is why clothes dry when hung outside, and why puddles disappear on a hot day. The rate of evaporation depends on several factors, including temperature, humidity, and air movement, among others.

-

Grignard reactions can be slow to initiate because, C. the magnesium reacts with air to form a magnesium oxide coating.

Magnesium metal turnings are thin shavings or filings of magnesium metal. They are commonly used as a reagent in organic chemistry reactions, such as the Grignard reaction, where they react with organic halides to form carbon-carbon bonds.

Magnesium turnings are often preferred over other forms of magnesium, such as powder or ribbon, because they have a higher surface area and are easier to handle. However, they can also pose some safety risks, such as flammability and reactivity with air and water.

Find out more on magnesium metal turnings here: https://brainly.com/question/30669128

#SPJ1

There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

We need to use the formula:

mass = moles × molar mass

where

C12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.

The volume must first be changed from milliliters to liters:

1000 ml = 1000/1000 L = 1 L

Next, we can determine how many moles of C12H22O11 are present in the solution:

moles = 2.0 M × 1 L = 2.0 moles

Finally, we can figure out how much C12H22O11 is present in the solution:

mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams

Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

Learn more about molar mass here : brainly.com/question/21334167

#SPJ1

There are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

We need to use the formula:

mass = moles × molar mass

where

C12H22O11 (sucrose) has a molar mass of about 342.3 g/mol.

The volume must first be changed from milliliters to liters:

1000 ml = 1000/1000 L = 1 L

Next, we can determine how many moles of C12H22O11 are present in the solution:

moles = 2.0 M × 1 L = 2.0 moles

Finally, we can figure out how much C12H22O11 is present in the solution:

mass = moles × molar mass = 2.0 moles × 342.3 g/mol ≈ 684.6 grams

Therefore, there are roughly 684.6 grams in a sample of 1000 ml of C12H22O11 in a 2.0 M solution.

Learn more about molar mass here : brainly.com/question/21334167

#SPJ1