Given the chemical reaction:
AsF3 + C2Cl6 --> AsCl3 + C2Cl2F4
If 1.3618 mol AsF3 are allowed to react with 1.000 mol C2Cl6
what would be the theoretical yield of C2Cl2F4?
Select one:
a. 128.1 g
b. 134.1 g
c. 170.9 g
d. 174.6 g
e. 185.5 g

we need 77869 g or 77,869 g (to the nearest whole number) of Fe2O3 to react with CO to produce 155.6 kg of Fe.

The balanced equation shows that 2 moles of Fe are produced for every 1 mole of Fe2O3 that reacts. Therefore, we need to find out how many moles of Fe2O3 are needed to produce 155.6 kg of Fe.

First, we need to convert 155.6 kg to grams:

155.6 kg x 1000 g/kg = 155600 g

Next, we need to use the molar mass of Fe2O3 to convert grams to moles:

155600 g / 159.7 g/mol = 974.86 mol

Finally, we can use the stoichiometry of the balanced equation to determine the mass of Fe2O3 needed to produce this amount of Fe:

1 mol Fe2O3 : 2 mol Fe

974.86 mol Fe2O3 : x

x = 487.43 mol Fe

Now we can convert the moles of Fe2O3 to grams:

487.43 mol Fe2O3 x 159.7 g/mol = 77869.51 g

learn more about moles here:

https://brainly.com/question/28239680

#SPJ11

Okay, let's think through this step-by-step:

1) The initial equilibrium lies on the right side, favoring the products (H2 and O2 gases), because the standard enthalpy change (AH) is positive for this reaction, meaning the products are more stable.

2) When we increase the volume of the container, the pressure decreases according to Boyle's law (P=k/V).

3) A decrease in pressure favors the side with the greater number of moles of gases. In this case, the product side has 2 moles of gas (H2 + O2), so the equilibrium will shift to the right.

4) Therefore, when the volume increases, the equilibrium will shift further in favor of the products (H2 and O2 gases).

The answer is a: It will shift in favor of the products.

Let me know if this makes sense! I can re-explain anything that is unclear.

According to the balanced chemical equation: 2 As + 3 Cl2 → 2 AsCl3

we can see that 3 moles of Cl2 react with 2 moles of As to produce 2 moles of AsCl3. This means that the mole ratio of Cl2 to AsCl3 is 3:2.

Therefore, to produce 4 moles of AsCl3, we need to use the mole ratio to determine the amount of Cl2 required:

moles AsCl3 × (3 moles Cl2 / 2 moles AsCl3) = 6 moles Cl2

Thus, 6 moles of Cl2 must react in order to produce 4 moles of AsCl3

learn more abouT moles here:

https://brainly.com/question/15356425

#SPJ4

The density of krypton gas at 0.970 atm and 29.8°C is 3.57 g/L.

To find the density of krypton gas, we can use the Ideal Gas Law formula (PV=nRT) and the density formula (density = mass/volume). First, rearrange the Ideal Gas Law formula to solve for n/V (number of moles per volume), which is n/V = P/RT.

1. Convert the temperature to Kelvin: 29.8°C + 273.15 = 302.95 K

2. Use the Ideal Gas constant R: 0.0821 L atm/(mol K)

3. Plug in the values into the formula: n/V = (0.970 atm)/(0.0821 L atm/(mol K) x 302.95 K) = 0.03956 mol/L

4. Krypton has a molar mass of 83.8 g/mol. Multiply n/V by the molar mass to get the density: 0.03956 mol/L x 83.8 g/mol = 3.57 g/L.

To know more about Ideal Gas Law click on below link:

https://brainly.com/question/28257995#

#SPJ11

The entropy change for the system when 1.53 moles of CO(g) react at standard conditions is -173.4 J/K.

To calculate the entropy change for the system when 1.53 moles of CO(g) react at standard conditions, we need to use the standard absolute entropies at 298K. The equation for the reaction is:

2CO(g) + O2(g) ---> 2CO2(g)

The standard absolute entropies for CO(g), O2(g), and CO2(g) at 298K are:

S°CO(g) = 197.9 J/K·mol
S°O2(g) = 205.0 J/K·mol
S°CO2(g) = 213.7 J/K·mol

Using the equation:

ΔS° = ΣnS°(products) - ΣnS°(reactants)

where n is the stoichiometric coefficient of each species, we can calculate the entropy change for the system:

ΔS° = 2(213.7 J/K·mol) - (2)(197.9 J/K·mol) - (1)(205.0 J/K·mol)
ΔS° = 427.4 J/K·mol - 395.8 J/K·mol - 205.0 J/K·mol
ΔS° = -173.4 J/K·mol

Learn more about entropies here: brainly.com/question/13135498

#SPJ11

The solid does not react with a small amount of 3 M HNO3 is (D) silver chloride.

Your answer: (D) silver chloride does not react with a small amount of 3 M HNO3. This is because silver chloride is relatively insoluble in nitric acid, unlike the other solids which will react to form various products.

To know more about insoluble refer here:

https://brainly.com/question/18799126#

SPJ11#

The solid that does not react with a small amount of 3 M HNO₃ is silver chloride (AgCl). The correct option is (D).

Silver chloride is an insoluble ionic compound, which means it does not dissolve well in water or other common solvents. When HNO₃ (nitric acid) comes into contact with the other solids, chemical reactions occur.

(A) Calcium carbonate (CaCO₃) reacts with HNO₃, producing calcium nitrate (Ca(NO₃)₂), carbon dioxide (CO₂), and water (H₂O). This reaction is due to the acidic nature of HNO₃, which can cause the release of CO₂ from CaCO₃.

(B) Manganese(II) sulfide (MnS) reacts with HNO₃, producing manganese(II) nitrate (Mn(NO₃)₂), hydrogen sulfide (H₂S), and water (H₂O). In this case, the acid reacts with the sulfide, forming hydrogen sulfide gas as a product.

(C) Potassium sulfite (K₂SO₃) also reacts with HNO₃, resulting in the formation of potassium nitrate (KNO₃) and sulfuric acid (H₂SO₄). The acid reacts with the sulfite, creating a sulfate compound and a nitrate salt.

In conclusion, silver chloride (D) does not react with a small amount of 3 M HNO₃, while the other solids undergo chemical reactions when exposed to the acid. This is due to AgCl's insoluble nature and its inability to form new compounds under these conditions.

For more such questions on Solid.

https://brainly.com/question/20305354#

#SPJ11

The molarity of the solution containing 0.155 mol of [tex]ZnCl_2[/tex] in 170 mL of solution is approximately 0.9118 M.

To find the molarity of a solution containing 0.155 mol of [tex]ZnCl_2[/tex] in exactly 170 mL of solution, follow these steps:

1. Convert the volume of the solution from milliliters (mL) to liters (L): 170 mL * (1 L / 1000 mL) = 0.170 L.
2. Use the formula for molarity: M = moles of solute ([tex]ZnCl_2[/tex]) / volume of solution (in L).
3. Plug in the values: M = 0.155 mol / 0.170 L.

Now, calculate the molarity:

M = 0.155 mol / 0.170 L = 0.9118 M (approximately)

To know more about "Molarity" refer here:

https://brainly.com/question/22838037#

#SPJ11

The mechanism for the formation of p-nitrobenzenediazonium hydrogen sulfate from p-nitroaniline involves protonation, nitrosation, rearrangement to form the diazonium ion, and reaction with hydrogen sulfate ion.

Here is a step-by-step mechanism for this reaction:

Step 1: Protonation of p-nitroaniline
The p-nitroaniline (1) reacts with a strong acid, like sulfuric acid ([tex]H_2SO_4[/tex]), to get protonated at the nitrogen atom. This forms the protonated p-nitroaniline (2).

Step 2: Nitrosation
The protonated p-nitroaniline (2) reacts with sodium nitrite ([tex]NaNO_2[/tex]) in an acidic solution. This generates nitrous acid ([tex]HNO_2[/tex]) in situ, which further reacts with protonated p-nitroaniline to form the N-nitroso-p-nitroaniline intermediate (3).

Step 3: Formation of p-nitrobenzenediazonium ion
The N-nitroso-p-nitroaniline (3) undergoes rearrangement to form the p-nitrobenzenediazonium ion (4), releasing a water molecule in the process.

Step 4: Formation of p-nitrobenzenediazonium hydrogen sulfate
Finally, the p-nitrobenzenediazonium ion (4) reacts with hydrogen sulfate ion ([tex]H_2SO_4[/tex]-) to form the p-nitrobenzenediazonium hydrogen sulfate (5).

To know more about "Hydrogen sulfate" refer here:

https://brainly.com/question/24141335#

#SPJ11

1. An equation for the reaction HCl and CuSO₄ is 2HCl + CuSO₄ → CuCl₂ + H₂SO₄.

2a. Zn is mixed with 0.5M magnesium chloride, MgCl₂, no reaction.

b. Mg is mixed with 0.5M ZnCl₂ is Mg + ZnCl₂ → Zn + MgCl₂.

3. The metals Cu, Fe, and Al, aluminum would be the most affected by acid rain because it reacts readily with acids.

4. Acidic foods cooked in a cast iron skillet may become Fe₂⁺ enriched because of a reaction between the acidic food and the skillet.

If HCl and CuSO₄ are mixed, a reaction occurs because HCl is a strong acid and CuSO₄ is a salt of a weak acid (H₂SO₄). The balanced equation for the reaction is:

2HCl + CuSO₄ → CuCl₂ + H₂SO₄

The products are CuCl₂ and H₂SO₄.

When Zn is mixed with 0.5M magnesium chloride, MgCl₂, no reaction occurs because Zn is less active than Mg. The balanced equation for the reaction is: No Reaction.

When Mg is mixed with 0.5M ZnCl₂, Mg displaces Zn from its compound because Mg is more active than Zn. The balanced equation for the reaction is:

Mg + ZnCl₂ → Zn + MgCl₂

The products are Zn and MgCl₂.

Of the metals Cu, Fe, and Al, aluminum would be the most affected by acid rain because it reacts readily with acids. The balanced equation for the reaction between aluminum and hydrochloric acid (HCl) is:

2Al + 6HCl → 2AlCl₃ + 3H₂

The products are aluminum chloride (AlCl₃) and hydrogen gas (H₂).

The iron in the skillet can react with the acid in the food, forming iron ions (Fe₂⁺) and hydrogen gas (H₂). However, this depends on the type of acidic food and the condition of the skillet. If the skillet is well-seasoned, it may not react with the food. Additionally, acidic foods cooked in a cast iron skillet can be a good source of dietary iron, but the amount of iron absorbed by the body can vary depending on the type of food and cooking method.

Learn more about acid rain: https://brainly.com/question/22143130

#SPJ11

The partial pressure of a component gas in a mixture is the pressure that gas would exert if present alone in the vessel at the same temperature as that of the mixture. Here the moles of hydrogen is 10.4

The pressure exerted by a mixture of two or more non-reacting gases enclosed in a definite volume is equal to the sum of the partial pressures of the component gases.

Partial pressure = Mole fraction × Total pressure

Mole fraction = Partial pressure /  Total pressure = 250 / 600 = 0.416

Mole fraction = Number of moles of Hydrogen / Total moles

Number of moles of Hydrogen = 0.416 × 25 = 10.4

To know more about partial pressure, visit;

https://brainly.com/question/13199169

#SPJ1

The decay of 232/90 Th (Thorium-232) to 208/82 Pb (Lead-208) involves a series of radioactive decay mechanisms, including alpha decay and beta decay.

1. Alpha decay: Thorium-232 undergoes alpha decay, emitting an alpha particle (consisting of 2 protons and 2 neutrons) and transforming into 228/88 Ra (Radium-228).

2. Beta decay: Some of the intermediate isotopes undergo beta decay, where a neutron in the nucleus is converted into a proton, emitting an electron (beta particle) and an antineutrino. This process increases the atomic number by 1, producing isotopes of elements like Actinium, Francium, and Bismuth along the decay chain.

These decay mechanisms continue in a series called the thorium decay chain, ultimately resulting in the stable isotope 208/82 Pb (Lead-208).

Learn more about decay here: https://brainly.com/question/28450741

#SPJ11

To achieve the greatest entropy of mixing, the proportions of hexane and heptane should be mixed in such a way that their mole fraction is equal.

This means that the number of moles of hexane and heptane in the mixture should be the same.

In order to determine the proportions of hexane and heptane by mole fraction, we need to first determine the number of moles of each component in the mixture. Let's assume we want to mix 1 mole of hexane and 1 mole of heptane. The total number of moles in the mixture is therefore 2.

The mole fraction of hexane is the number of moles of hexane divided by the total number of moles in the mixture, which is 1/2 or 0.5. The mole fraction of heptane is also 1/2 or 0.5. Therefore, to achieve the greatest entropy of mixing, the proportions of hexane and bshould be mixed in equal mole fractions.

Alternatively, we can also determine the proportions of hexane and heptane by mass. In this case, we need to consider the molar mass of each component. Let's assume the molar mass of hexane is 86 g/mol and the molar mass of heptane is 100 g/mol.

To achieve the greatest entropy of mixing, we need to mix the components in such a way that the mass fraction is equal. The mass fraction of hexane is the mass of hexane divided by the total mass of the mixture. Let's assume we want to mix 50 g of hexane and 50 g of heptane. The total mass of the mixture is therefore 100 g.

The mass fraction of hexane is 50 g / 100 g or 0.5. The mass fraction of heptane is also 0.5. Therefore, to achieve the greatest entropy of mixing, the proportions of hexane and heptane should be mixed in equal mass fractions.

Know more about Entropy here:

https://brainly.com/question/13135498

#SPJ11

a. To solve for the mass of phosphorus needed to produce 3.25 mol of P4O10, we need to use the stoichiometry of the reaction. From the balanced chemical equation, we can see that 4 mol of P reacts with 5 mol of O2 to produce 1 mol of P4O10. Therefore, we can set up a proportion:

4 mol P / 1 mol P4O10 = x mol P / 3.25 mol P4O10

Solving for x, we get:

x = (4 mol P / 1 mol P4O10) * 3.25 mol P4O10

x = 13 mol P

Finally, we can convert mol P to mass of P using its molar mass:

mass P = 13 mol P * 30.97 g/mol P = 402.61 g P

Therefore, 402.61 g of phosphorus will be needed to produce 3.25 mol of P4O10.

b. To solve for the mass of oxygen used and the mass of P4O10 produced when 0.489 mol of phosphorus burns, we can use the stoichiometry of the reaction again. From the balanced chemical equation, we can see that 4 mol of P reacts with 5 mol of O2 to produce 1 mol of P4O10. Therefore, we can set up two proportions:

5 mol O2 / 4 mol P = y mol O2 / 0.489 mol P

1 mol P4O10 / 4 mol P = z mol P4O10 / 0.489 mol P

Solving for y, we get:

y = (5 mol O2 / 4 mol P) * 0.489 mol P

y = 0.611 mol O2

To find the mass of oxygen used, we can convert mol O2 to mass:

mass O2 = 0.611 mol O2 * 32 g/mol O2 = 19.56 g O2

Solving for z, we get:

z = (1 mol P4O10 / 4 mol P) * 0.489 mol P

z = 0.1223 mol P4O10

To find the mass of P4O10 produced, we can convert mol P4O10 to mass:

mass P4O10 = 0.1223 mol P4O10 * 283.88 g/mol P4O10 = 34.73 g P4O10

Therefore, 19.56 g of oxygen is used and 34.73 g of P4O10 is produced when 0.489 mol of phosphorus burns.

When considering Newman projections, the staggered conformation is usually the lowest in energy due to minimized steric hindrance between substituents.

However, in certain cases, such as when attractive interactions like hydrogen bonding or stabilizing groups are present, a non-staggered conformation might be lower in energy. These specific cases depend on the molecules involved and the stabilizing forces at play.

Also, there are instances where the staggered conformation is not the lowest in energy in Newman projections. This can happen when the molecule has bulky substituents or if there is a cis arrangement of the substituents. In these cases, the eclipsed conformation may be lower in energy because the bulky substituents experience less steric strain in the eclipsed conformation. Additionally, in cis arrangements, the eclipsed conformation may be favored because it allows for greater conjugation and stability of the molecule.

https://brainly.com/question/31485777

#SPJ11

The energy of one 266 nm photon expressed in electron-volts is 4.66 eV and in joules is calculated as [tex]7.47 * 10^{-19} J[/tex].

The energy of one 266 nm photon (ultraviolet light) can be calculated using the formula E=hc/λ, where h is Planck's constant ([tex]6.626 * 10^{-34}[/tex] Joules x seconds), c is the speed of light ([tex]3.0* 10^8[/tex] meters/second), and λ is the wavelength in meters.
So, for a 266 nm photon, the wavelength is [tex]266 * 10^{-9}[/tex] meters. Plugging this into the formula, we get:
E = ([tex]6.626 * 10^{-34}[/tex] J.s)([tex]3 * 10^{8}[/tex] m/s)/([tex]266 * 10^{-9}[/tex] m)
E = [tex]7.47 * 10^{-19} J[/tex].
Therefore, the energy of one 266 nm photon is [tex]7.47 * 10^{-19} J[/tex].
To convert this energy to electron-volts (eV), we can use the formula 1 eV = [tex]1.6 * 10^{-19}J[/tex]. So:
E(eV) = ([tex]7.47 * 10^{-19} J[/tex].)/([tex]1.6 * 10^{-19} [/tex]. J/eV)
E(eV) = 4.66 eV

To learn more about photon click here https://brainly.com/question/28134171

#SPJ11

Organometallic compound can be used for a variety of synthetic transformations, such as coupling reactions, reductions, and rearrangements.

Explain organometallic compounds?

In general, the synthesis of organometallic compounds from alkyl halides involves a nucleophilic substitution reaction, where the halogen is replaced by a metal in the presence of a suitable metal reagent such as Grignard reagents, organolithium reagents, or organozinc reagents. The reaction is typically carried out in anhydrous conditions and with careful control of temperature and reactant stoichiometry to avoid unwanted side reactions. The resulting organometallic compound can be used for a variety of synthetic transformations, such as coupling reactions, reductions, and rearrangements.

Learn more about organometallic compound

brainly.com/question/29980092

#SPJ11

As a result of its strong electrolyte, the compound silver fluoride (AgF) (A g F) separates into its component ions, Ag+ A g + and F F. This is because there is a significant difference in the atomic sizes of silver and fluoride.

The connection formed between the silver and fluorine atoms won't be very strong and can be readily destroyed by hydration energy as a result, which is why it has a high solubility in water. AgF, also referred to as argentous fluoride and silver monofluoride, is a fluorine and silver compound. It is a solid with a ginger colour and a melting point of 435 °C that turns black when exposed to damp air.

To know more about electrolyte, click here:

https://brainly.com/question/29771118

#SPJ4

pH is a measure of the acidity or alkalinity of a solution. It is a logarithmic scale that indicates the concentration of hydrogen ions (H+) in a solution. The pH of the solution after the addition of NaOH to HF is approximately 5.11.

The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral. A pH below 7 indicates an acidic solution, with lower pH values indicating stronger acidity. A pH above 7 indicates an alkaline (basic) solution, with higher pH values indicating stronger alkalinity.

To determine the pH of the solution after the addition of NaOH to HF, we need to consider the reaction between NaOH and HF and the subsequent formation of a salt.

The balanced chemical equation for the reaction between NaOH and HF is:

[tex]NaOH + HF - > NaF + H_2O[/tex]

Since NaF is a salt, it will dissociate in water to release Na+ and F- ions.

To calculate the pH of the resulting solution, we need to determine the concentration of H+ ions present.

Initially, before the reaction, the concentration of H+ ions is given by the concentration of [tex]HF: [H+] = 0.1 M.[/tex]

After the reaction, NaOH reacts with HF to form NaF and water. The reaction consumes an equal molar amount of HF and NaOH, so we can calculate the remaining concentration of HF:

HF remaining = Initial concentration of HF - Concentration of NaOH used.

[tex]HF remaining = 0.1 M - (0.0255 L * 0.05 M)[/tex]

Now, we need to consider the dissociation of NaF. Since NaF is the salt of a weak acid (HF), we can assume complete dissociation of NaF in water.

NaF dissociates as follows:[tex]NaF - > Na^+ + F-[/tex]

The F- ion will react with water to form hydrofluoric acid (HF):

[tex]F^- + H_2O \geq HF + OH^-[/tex]

The OH- ions from the dissociation of NaF will contribute to the hydroxide ion concentration in the solution.

The concentration of OH- ions can be calculated from the concentration of NaF:

[tex][OH-] = [NaF]\\[OH-] = (0.0255 L * 0.05 M) [Using the given volume and concentration of NaOH][/tex]

Now, we can calculate the concentration of H+ ions using the equation for the ionization constant of water:

[tex][H+] * [OH-] = Kw\\[H+] * (0.0255 L * 0.05 M) = 1.0 x 10^{-14} M^2 [Kw = 1.0 x 10^{-14} M^2 at 25^0C]\\[H+] = 7.843 x 10^{-6} M[/tex]

Finally, we can calculate the pH using the equation:

[tex]pH = -log10([H+])\\pH = -log10(7.843 x 10^{-6})\\pH = 5.11[/tex]

Therefore, the pH of the solution after the addition of NaOH to HF is approximately 5.11.

For more details regarding pH, visit:

https://brainly.com/question/2288405

#SPJ12

The equilibrium constant for the reaction 2[tex]CO_{2}[/tex](g) + 2CF₄(g) ⇌ 4CF₄(g) at 25 °C is 1.

The equilibrium constant for a reaction can be expressed as the product of the equilibrium constants of the individual reactions when the reactions are added or multiplied to obtain the desired reaction. To find the equilibrium constant for the given reaction, we can use the equation:

K₂ = (K₁)^n

Where K₁ is the equilibrium constant for the given chemical equation and n is the number of moles of products formed minus the number of moles of reactants consumed in the balanced chemical equation for the desired reaction.

For the given chemical equation:

2COF₂(g) ⇌ CO₂(g) + CF₄(g), K₁ = 2.2×10⁶

The balanced chemical equation for the desired reaction is:

2CO₂(g) + 2CF₄(g) ⇌ 4COF₂(g)

Here, n = (4 - 2 - 2) = 0, as the number of moles of products formed and reactants consumed is equal.

Therefore, the equilibrium constant for the desired reaction is:

K₂ = (K₁)^n = (2.2×10⁶)^0 = 1

Thus, the equilibrium constant for the given reaction at 25 ∘C is 1.

To know more about Equilibrium Constant:

https://brainly.com/question/12959523

#SPJ11

To arrange the following elements in order of decreasing atomic radius (1 being the largest and 6 being the smallest), we need to consider their positions on the periodic table. Here's the order:

1. Sr (Strontium) - It is in Group 2 and Period 5, so it has the largest atomic radius.
2. Ca (Calcium) - It is in Group 2 and Period 4, having a smaller atomic radius than Sr.
3. Ge (Germanium) - It is in Group 14 and Period 4, so its atomic radius is smaller than Ca but larger than Si.
4. Si (Silicon) - It is in Group 14 and Period 3, with an atomic radius smaller than Ge.
5. S (Sulfur) - It is in Group 16 and Period 3, so it has a smaller atomic radius than Si.
6. Ne (Neon) - It is in Group 18 and Period 2, with the smallest atomic radius among the given elements.

So, the order of decreasing atomic radius is Sr (1) > Ca (2) > Ge (3) > Si (4) > S (5) > Ne (6).

To know more about Atomic radius :

https://brainly.com/question/1424942

#SPJ11

The volume of water per kilogram is B) 0.52 L / kg.

To answer this question, we can use the formula for calculating the concentration of a solute in a solution:

Concentration = (Mass of solute) / (Volume of solvent)

In this case, the mass of ethanol (solute) is 60 g, and the peak plasma concentration is 1.91 g/L. We also know that 55% of the woman's weight (60 kg) is water, which is the solvent in this situation.

First, let's find the total volume of water in the woman's body:

Total volume of water = 0.55 * 60 kg = 33 L

Now, let's plug in the given information into the formula:

1.91 g/L = (60 g) / (Volume of water)

To solve for the volume of water, we can rearrange the formula:

Volume of water = (60 g) / (1.91 g/L) ≈ 31.41 L

Now, we'll divide the total volume of water by the woman's weight to find the volume of water per kilogram:

Volume of water per kilogram = (31.41 L) / (60 kg) ≈ 0.52 L/kg

So, the correct answer is:

B) 0.52 L/kg

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ11

Yes, a reaction occurs when aqueous solutions of barium hydroxide and manganese(II) acetate are combined. The net ionic equation is:

Ba^(2+) + 2 OH^(-) + Mn^(2+) + 2 CH3COO^(-) -> Ba(CH3COO)2 + Mn(OH)2


1. Write the balanced molecular equation:
Ba(OH)2 + Mn(CH3COO)2 -> Ba(CH3COO)2 + Mn(OH)2

2. Write the complete ionic equation:
Ba^(2+) + 2 OH^(-) + Mn^(2+) + 2 CH3COO^(-) -> Ba^(2+) + 2 CH3COO^(-) + Mn^(2+) + 2 OH^(-)

3. Identify spectator ions (ions that do not change):
Ba^(2+) and CH3COO^(-)

4. Remove spectator ions to find the net ionic equation:
Ba^(2+) + 2 OH^(-) + Mn^(2+) + 2 CH3COO^(-) -> Ba(CH3COO)2 + Mn(OH)2

To know more about ionic equation click on below link:

https://brainly.com/question/29299745#

#SPJ11

The sulfate ion concentration of the resulting solution when 75.0 mL of 1.50 M CuSO₄ and 50.0 mL of 1.00 M CO₂(SO₄)₃ are mixed together is (c) 2.10 M.

To find the sulfate ion concentration in the resulting solution, first, determine the moles of sulfate ions contributed by each compound, then calculate the total volume of the solution and finally, find the concentration.

For CuSO₄:
75.0 mL * 1.50 mol/L = 112.5 mmol sulfate ions

For CO₂(SO₄)₃ (note that there are 3 sulfate ions in this compound):
50.0 mL * 1.00 mol/L * 3 = 150 mmol sulfate ions

Total moles of sulfate ions = 112.5 mmol + 150 mmol = 262.5 mmol

Total volume of the solution = 75.0 mL + 50.0 mL = 125.0 mL

Sulfate ion concentration = (262.5 mmol) / (125.0 mL) = 2.1 mol/L

So, the answer is c) 2.10 M.

Learn more about concentration here: https://brainly.com/question/26255204

#SPJ11

In total, 10 protons (H+) are pumped out of the mitochondrial matrix for each pair of electrons extracted by the enzyme malate dehydrogenase.

To determine how many protons are pumped out of the mitochondrial matrix for each pair of electrons extracted by the enzyme malate dehydrogenase, we need to consider the electron transport chain (ETC) steps involved.

1. Malate dehydrogenase catalyzes the conversion of malate to oxaloacetate, transferring a pair of electrons to NAD+ to form NADH.
2. NADH donates these electrons to Complex I (NADH dehydrogenase) in the ETC.
3. Complex I pumps 4 protons (H+) out of the mitochondrial matrix for each pair of electrons.
4. Electrons then move to Complex III (cytochrome bc1 complex) via ubiquinone (Q), and 4 more protons are pumped out.
5. Finally, electrons pass through Complex IV (cytochrome c oxidase), pumping 2 more protons out of the matrix.

To know more about "Mitochondrial matrix" refer here:

https://brainly.com/question/24971193#

#SPJ11

In a weak acid-strong base titration, the equivalence point is greater than 7. In a strong acid-weak base titration, the equivalence point is less than 7.

A. The pH at the equivalence point depends on the nature of the acid and base being titrated, as well as their concentrations. In a strong acid-strong base titration, the equivalence point is pH 7. In a weak acid-strong base titration, the equivalence point is greater than 7. In a strong acid-weak base titration, the equivalence point is less than 7.

B. The volume of added acid at the equivalence point can be calculated by using the formula: moles of acid = moles of base. Once the moles of acid and base are equal, the equivalence point is reached.

C. The pH calculated by working an equilibrium problem based on the initial concentration and Kb of the weak base is equal to the pKb of the weak base at half-equivalence point. The volume of added acid required to reach half-equivalence point can be calculated using the formula: moles of acid = (1/2) x moles of base.

D. At the volume of added acid where pH=14-pKb, the weak base is half-neutralized and the solution contains equal concentrations of the weak base and its conjugate acid. This is also the half-equivalence point. The volume of added acid required to reach this point can be calculated using the formula: moles of acid = (1/2) x moles of base.

E. At the volume of added acid where the pH is calculated by working an equilibrium problem based on the concentration and Ka of the conjugate acid, the weak base is completely neutralized and the solution contains only the conjugate acid. The volume of added acid required to reach this point can be calculated using the formula: moles of acid = moles of base.

Learn more about equivalence Visit: brainly.com/question/30592456

#SPJ4

Reaction 3 produced O2 2.37 times faster than Reaction 1 produced H2O. (a) The variable that is different (or changed) between Reactions 1 and 3 is the concentration of hydrogen peroxide ([H2O2]).
(b) Reaction 3 produced O2 faster than Reaction 1 produced H2O.
(c) The ratio of the rates of these two experiments can be calculated using the equation:

rate = Δ[H2O]/Δt (or Δ[O2]/Δt)

The data provided for Reactions 1 and 3 are:

Reaction 1:
[H2O2] = 0.01 M
Δ[H2O] = 1.04 x 10^-4 M
Δt = 60 s

Reaction 3:
[H2O2] = 0.02 M
Δ[O2] = 1.23 x 10^-4 M
Δt = 30 s

To calculate the rates, we need to divide the change in concentration by the time:

rate1 = Δ[H2O]/Δt = (1.04 x 10^-4 M) / (60 s) = 1.73 x 10^-6 M/s
rate3 = Δ[O2]/Δt = (1.23 x 10^-4 M) / (30 s) = 4.10 x 10^-6 M/s

The ratio of the rates is:

rate3 / rate1 = (4.10 x 10^-6 M/s) / (1.73 x 10^-6 M/s) = 2.37

Therefore, Reaction 3 produced O2 2.37 times faster than Reaction 1 produced H2O.

Learn more about Reaction here:

https://brainly.com/question/28984750

#SPJ11

To sketch the corresponding free energy of mixing curves versus compositions for the liquid at different temperatures.

we first need to understand the concept of mixing and curves.

Mixing refers to the process of combining two or more substances together to create a uniform composition. In the context of thermodynamics, mixing involves the free energy change that occurs when two or more substances are brought into contact with each other.

Curves, on the other hand, refer to the graphical representation of the free energy change that occurs as a function of composition. In other words, curves show how the free energy changes as we vary the proportion of two or more substances.

Now, to sketch the corresponding free energy of mixing curves versus compositions for the liquid at different temperatures, we need to consider the phase behavior of the system. Assuming that the liquid phase is the only stable phase at these temperatures, we can use the following equations to calculate the free energy change:

ΔGmix = RT(χA ln χA + χB ln χB)
χA + χB = 1

where ΔGmix is the free energy change upon mixing, R is the gas constant, T is the temperature, χA and χB are the mole fractions of the two components (A and B), and ln is the natural logarithm.

Using these equations, we can plot the free energy of mixing curves versus compositions for the liquid at different temperatures. The resulting curves will have a minimum at the composition that corresponds to the lowest free energy state of the system. At this point, the system will be in thermodynamic equilibrium and the two components will be evenly distributed throughout the mixture.

Therefore, to sketch the corresponding free energy of mixing curves versus compositions for the liquid at t=t4, t3, t2, and t1, we need to calculate the free energy change at each temperature for different compositions of the two components. We can then plot these values on a graph to obtain the curves.

Note that the exact shape of the curves will depend on the specific properties of the two components and the temperature of the system. However, in general, we can expect the curves to have a similar shape, with a minimum at the composition that corresponds to the lowest free energy state of the system.

Learn more about sketch here:

https://brainly.com/question/15621650

#SPJ11

The 10 effects of adding KI are:

1) Adding KI can increase the rate of a reaction.

2) Adding KI can decrease the rate of a reaction.

3) Adding KI can decrease the activation energy of a reaction.

4) Adding KI can increase the activation energy of a reaction.

5) Adding KI can change the pre-exponential factor of a reaction.

6) Adding KI can change the temperature of a reaction.

7) Adding KI can change the reaction mechanism.

8)Adding KI can change the equilibrium of a reaction.

9) Equation 16.12 can be used to account for these observations.

10) KI can affect product selectivity.

What is the effect of adding KI?

10 effects that adding KI could have on a chemical reaction, along with an explanation using Equation 16.12 to account for each observation:

1) If adding KI increases the rate of the reaction, then the rate constant k must have increased. This could be due to KI acting as a catalyst, reducing the activation energy required for the reaction to occur. The equation to account for this would be:

k = A * e^(-Ea/RT)

If KI lowers Ea, then k will increase, resulting in a faster reaction rate.

2) If adding KI decreases the rate of the reaction, then the rate constant k must have decreased. This could be due to KI reacting with one of the reactants or products, reducing its concentration and thus decreasing the rate of the reaction. The equation to account for this would be:

k = A * e^(-Ea/RT)

3) If KI lowers the concentration of a reactant, then k will decrease, resulting in a slower reaction rate.

If adding KI increases the activation energy of the reaction, then the rate constant k will decrease, resulting in a slower reaction rate. The equation to account for this would be:

k = A * e^(-Ea/RT)

If KI increases Ea, then k will decrease, resulting in a slower reaction rate.

4) If adding KI changes the pre-exponential factor A of the reaction, then the rate constant k will change in proportion to A, resulting in a faster or slower reaction rate. The equation to account for this would be:

k = A * e^(-Ea/RT)

If KI changes A, then k will change accordingly, resulting in a faster or slower reaction rate.

5) If adding KI changes the temperature of the reaction, then the rate constant k will change exponentially with respect to the change in temperature, resulting in a faster or slower reaction rate. The equation to account for this would be:

k = A * e^(-Ea/RT)

If KI changes the temperature, then the exponential term e^(-Ea/RT) will change, resulting in a faster or slower reaction rate.

6) If adding KI changes the reaction mechanism, then the rate constant k and the activation energy Ea may both change. The equation to account for this would still be:

k = A * e^(-Ea/RT)

However, the value of Ea and/or A may be different in the new mechanism, resulting in a different rate constant and reaction rate.

7) If adding KI changes the equilibrium constant of the reaction, then the concentrations of reactants and products will change, and the reaction rate will either increase or decrease depending on the nature of the equilibrium shift. The equation to account for this would be:

k = A * e^(-Ea/RT)

However, the concentrations of reactants and products will be different in the new equilibrium, resulting in a different value of k and reaction rate.

8) If adding KI changes the stoichiometry of the reaction, then the rate constant k may change depending on the new reaction pathway and intermediate species involved. The equation to account for this would still be:

k = A * e^(-Ea/RT)

However, the value of A and/or Ea may be different in the new stoichiometry, resulting in a different rate constant and reaction rate.

9) If adding KI acts as an inhibitor or a poison for the reaction, then the rate constant k will decrease, resulting in a slower reaction rate. The equation to account for this would be:

k = A * e^(-E

10) KI can affect the selectivity of the reaction by promoting or inhibiting the formation of certain products, depending on the reaction conditions and the reaction mechanism.

Learn more about KI

brainly.com/question/31472538

#SPJ11

The correct order, beginning with the weakest and ending with the strongest base, is:

a. HCO3- < Br- < OH-

This means that HCO3- is the weakest base, followed by Br-, and finally, OH- is the strongest base among the given anions.

Basicity is the number of replaceable hydrogen atoms in a particular acid. Conjugate acid of a weak base is always stronger and conjugate base of weak acid is always strong. The larger the Kb, the stronger the base and the higher the OH− concentration at equilibrium. 

For more questions of weak bases: https://brainly.com/question/16901512

#SPJ11

To calculate the equilibrium constant for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g) at 25°C, we can use the following formula:

ΔG° = -RTlnK

Where ΔG° is the standard free energy change for the reaction, R is the gas constant (8.314 J/mol*K), T is the temperature in Kelvin (25°C = 298 K), and K is the equilibrium constant.

From Appendix IIB, we can find the ΔG°f values for each of the species involved in the reaction:

ΔG°f[N2(g)] = 0 kJ/mol
ΔG°f[H2(g)] = 0 kJ/mol
ΔG°f[NH3(g)] = -16.45 kJ/mol

Using these values, we can calculate the standard free energy change for the reaction:

ΔG° = (2 × ΔG°f[NH3(g)]) - (ΔG°f[N2(g)] + 3 × ΔG°f[H2(g)])
ΔG° = (2 × -16.45 kJ/mol) - (0 kJ/mol + 3 × 0 kJ/mol)
ΔG° = -32.9 kJ/mol

Now we can use the formula above to calculate the equilibrium constant K:

ΔG° = -RTlnK
-32.9 kJ/mol = -(8.314 J/mol*K × 298 K) × ln(K)
ln(K) = -32.9 kJ/mol / (-8.314 J/mol*K × 298 K)
ln(K) = 4.122
K = e^(4.122)
K = 61.7

Therefore, the equilibrium constant for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g) at 25°C is 61.7.
To calculate the equilibrium constant (K) at 25°C for the reaction N₂(g) + 3H₂(g) ⇌ 2NH₃(g), we need to use the Gibbs free energy change (ΔG°) values from Appendix IIB.

The equation relating ΔG° to K is:

ΔG° = -RT ln K

Where:
ΔG° is the standard Gibbs free energy change,
R is the gas constant (8.314 J/mol·K),
T is the temperature in Kelvin (25°C = 298.15K),
and K is the equilibrium constant.

First, find the ΔG° for the reaction using the ΔGf° values in Appendix IIB:

ΔG° = Σ(ΔGf° of products) - Σ(ΔGf° of reactants)

Once you have the ΔG° for the reaction, use the equation above to calculate K:

K = e^(-ΔG° / (RT))

After solving for K, you will have the equilibrium constant for the given reaction at 25°C.

Visit here to learn more about equilibrium constant brainly.com/question/10038290

#SPJ11