[tex]a) i) pH > 7 ii) pH=9.25 iii) pH < 7[/tex], [tex]b) i) pH=8.05 ii) pH=7.00 iii) pH=6.17[/tex].
[tex]c) i) pH=5.30 ii) pH=7.00 iii) pH=9.04[/tex]. Before adding any HCl, NH3 acts as a weak base and the pH is greater than 7.
After adding 24.0 mL of HCl, NH3 and HCl are in equal moles and the pH is at the equivalence point, which is pH=7. After adding 39.0 mL of HCl, excess HCl is present and the pH becomes acidic, which is less than 7.
a) i) NH3 acts as a weak base and the pH is greater than 7.
ii) At the equivalence point, the pH is 9.25, calculated by finding the pKa of NH3 and using the Henderson-Hasselbalch equation.
iii) After exceeding the equivalence point, the pH becomes acidic and is less than 7.
b) i) At 24.0 mL, the pH is still basic but lower than before, which is around 8.05, calculated by finding the moles of NH3 remaining and HCl added.
ii) At the equivalence point, the pH is 7.
iii) After exceeding the equivalence point, the pH becomes acidic and is less than 7, which is around 6.17.
c) i) After adding 39.0 mL of HCl, the pH becomes acidic, which is less than 7 and is around 5.30.
ii) At the equivalence point, the pH is 7.
iii) After exceeding the equivalence point, the pH becomes basic and is greater than 7, which is around 9.04.
learn more about HCl here:
https://brainly.com/question/29204122
#SPJ11
Given the following chemical equation, how many moles of NH3 are needed to react completely with 50.0 g of oxygen gas? 4 NH3 + 3 O2 + 2 N2 + 6 H2O
A) 2.08 mol
B) 1.17 mol
C) 66.7 mol
D) 4.17 mol
E) 37.5 mol
2.08 mol of NH3 is needed to react completely with 50.0 g of oxygen gas.
To determine how many moles of NH3 are needed to react completely with 50.0 g of oxygen gas, follow these steps:
1. Convert the mass of O2 to moles using its molar mass:
50.0 g O2 × (1 mol O2 / 32.00 g O2) = 1.5625 mol O2
2. Use the stoichiometry of the balanced chemical equation to find the required moles of NH3:
(4 moles NH3 / 3 moles O2) × 1.5625 mol O2 = 2.0833 mol NH3
3. Round the answer to two decimal places and match it with the given options:
2.08 mol NH3 (Option A)
So, the correct answer is A) 2.08 mol of NH3 is needed to react completely with 50.0 g of oxygen gas.
Know more about Balanced Chemical Equation here:https://brainly.com/question/28294176
#SPJ11
Based on the number of moles of malachite that you started with, how many grams of water were produced? the molar mass of water is 18.0153 g/mol. choose the closest answer.
Based on the number of moles of malachite that we started with, approximately 54.046 grams of water were produced.
The balanced chemical equation for the reaction that produced the malachite is:
2 CuCO₃ · Cu(OH)₂(s) → 3 H₂O(g) + CO₂(g) + 3 CuO(s)
From this equation, we can see that for every 3 moles of water produced, we started with 2 moles of malachite. Therefore, we can use the mole ratio to calculate the number of moles of water produced:
moles of water = (2 moles malachite) x (3 moles water / 2 moles malachite) = 3 moles water
Now that we know the number of moles of water produced, we can use the molar mass of water to calculate the mass:
mass of water = (3 moles water) x (18.0153 g/mol) = 54.046 g
To know more about balanced chemical equation click on below link:
https://brainly.com/question/28294176#
#SPJ11
in the titration of 25.0 ml of 0.1 m f− (where the solution was made using naf(aq)) with 0.1 m hcl, how is the ph calculated after 30.0 ml of titrant is added?
The pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.
How is the pH calculated after 30.0 mL of 0.1 M HCl is added to 25.0 mL of 0.1 M F- solution in a titration?To calculate the pH of the solution after 30.0 mL of 0.1 M HCl in the titration of 25.0 ml of 0.1 mL - solution, we need to use the Henderson-Hasselbalch equation.
The Henderson-Hasselbalch equation relates the pH of a solution to the pKa and the ratio of the concentrations of the conjugate acid and base forms of a weak acid or base:
pH = pKa + log([A-]/[HA])
Where:
pH = the pH of the solution
pKa = the dissociation constant of the weak acid or base
[A-] = the concentration of the conjugate base (F-)
[HA] = the concentration of the weak acid (HF)
In this case, F- is the conjugate base of the weak acid HF. The pKa of HF is 3.17.
First, we need to calculate the moles of F- in the solution before any titrant is added:
moles F- = concentration x volume = 0.1 M x 0.025 L = 0.0025 moles
Next, we need to determine the limiting reactant after 30.0 mL of 0.1 M HCl is added. Since the moles of HCl added is:
moles HCl = concentration x volume = 0.1 M x 0.03 L = 0.003 moles
and the initial moles of F- is 0.0025 moles, we see that HCl is in excess and F- is the limiting reactant.
After adding 30.0 mL of HCl, the total volume of the solution is 25.0 mL + 30.0 mL = 0.055 L. The moles of F- remaining after the reaction is:
moles F- = initial moles - moles HCl reacted = 0.0025 moles - 0.003 moles = -0.0005 moles
Since we cannot have a negative concentration, we know that all of the F- has reacted with the HCl, and we are left with a solution containing only HF and its conjugate acid, H2F+.
The moles of HF formed is equal to the moles of HCl added:
moles HF = moles HCl added = 0.003 moles
The concentration of HF in the final solution is:
concentration HF = moles HF / total volume = 0.003 moles / 0.055 L = 0.0545 M
The concentration of F- in the final solution is:
concentration F- = 0 moles / 0.055 L = 0 M
Now we can use the Henderson-Hasselbalch equation to calculate the pH:
pH = pKa + log([A-]/[HA])
pH = 3.17 + log(0/0.0545)
pH = 3.17 - infinity
pH = 3.17 (since the log of 0 is negative infinity)
Therefore, the pH of the solution after 30.0 mL of 0.1 M HCl is added is 3.17.
Learn more about titration
brainly.com/question/31271061
#SPJ11
An unknown salt, M2z, has a Ksp of 6.6 x 10-12. Calculate the solubility in mol/L of M2Z. Select one: a. 4.7 x 10-5M O b. 1.2 x 10-4M O c. none of the above O d. 1.3 x 10-6M O e. 2.6 x 10-6M
The solubility of M2Z in mol/L is approximately 1.3 x 10^-4 M. The correct answer is b. 1.2 x 10^-4 M, as it is the closest option to the calculated value.
To calculate the solubility in mol/L of an unknown salt M2Z, given its ksp value (6.6 x 10^-12).
The solubility product constant (ksp) is an equilibrium constant that describes the solubility of a slightly soluble ionic compound. For M2Z, the dissolution equation is:
M2Z (s) ⇌ 2M^+ (aq) + Z^2- (aq)
The Ksp expression is: Ksp = [M^+]²[Z^2-]
Let x be the solubility of M2Z in mol/L. Then, [M^+] = 2x and [Z^2-] = x. Substituting these values into the Ksp expression:
Ksp = (2x)² * x
Now plug in the given Ksp value (6.6 x 10^-12):
6.6 x 10^-12 = (4x^3)
To find x, the solubility of M2Z:
x = (6.6 x 10^-12 / 4)^(1/3)
x ≈ 1.3 x 10^-4 M
So, the solubility of M2Z in mol/L is approximately 1.3 x 10^-4 M. The correct answer is b. 1.2 x 10^-4 M, as it is the closest option to the calculated value.
Learn more about ksp : https://brainly.com/question/27964828
#SPJ11
how many grams of solute are needed to make 586 ml of 7.85 × 10−2 m potassium sulfate?
To make 586 mL of 7.85 × 10^−2 M potassium sulfate, you will need 8.01 grams of solute.
To determine how many grams of solute are needed to make 586 mL of 7.85 × 10^−2 M potassium sulfate, follow these steps:
1. Convert the volume from mL to L: 586 mL * (1 L / 1000 mL) = 0.586 L
2. Use the molarity formula (M = moles of solute / volume of solution in L): 7.85 × 10^−2 M = moles of solute / 0.586 L
3. Solve for moles of solute: moles of solute = 7.85 × 10^−2 M * 0.586 L = 0.04599 moles
4. Determine the molar mass of potassium sulfate (K2SO4): (2 * 39.10 g/mol K) + (1 * 32.07 g/mol S) + (4 * 16.00 g/mol O) = 174.26 g/mol
5. Calculate the mass of potassium sulfate needed: 0.04599 moles * 174.26 g/mol = 8.01 g
To know more about "Molarity" refer here:
https://brainly.com/question/22837979#
#SPJ11
diethyl ether has a normal boiling point of 34.6 °c and a boiling point of –1.5 °c at 100 mm hg. what is the value of ∆h°vaporization in kj/mol?
The value of ∆H°vaporization of the diethyl ether is approximately 26.24 kJ/mol.
To calculate the ΔH°vaporization (enthalpy of vaporization) of diethyl ether, we can use the Clausius-Clapeyron equation:
ln(P₁/P₂) = (ΔH°vaporization/R) * (1/T₂ - 1/T₁)
In this case,
Normal boiling point (T₁) = 34.6 °C = 307.75 K (convert to Kelvin by adding 273.15)
Boiling point at 100 mm Hg (T₂) = -1.5 °C = 271.65 K
P₁ = 760 mm Hg (normal atmospheric pressure)
P₂ = 100 mm Hg
R = 8.314 J/(mol*K) (gas constant)
Plugging in the values:
ln(760/100) = (ΔH°vaporization/8.314) * (1/271.65 - 1/307.75)
Solve for ΔH°vaporization:
ΔH°vaporization ≈ 26.24 kJ/mol
Therefore, the value of ΔH°vaporization for diethyl ether is approximately 26.24 kJ/mol.
Learn more about Clausius-Clapeyron equation here: https://brainly.com/question/29414397
#SPJ11
The value of ∆H°vaporization of the diethyl ether is approximately 26.24 kJ/mol.
To calculate the ΔH°vaporization (enthalpy of vaporization) of diethyl ether, we can use the Clausius-Clapeyron equation:
ln(P₁/P₂) = (ΔH°vaporization/R) * (1/T₂ - 1/T₁)
In this case,
Normal boiling point (T₁) = 34.6 °C = 307.75 K (convert to Kelvin by adding 273.15)
Boiling point at 100 mm Hg (T₂) = -1.5 °C = 271.65 K
P₁ = 760 mm Hg (normal atmospheric pressure)
P₂ = 100 mm Hg
R = 8.314 J/(mol*K) (gas constant)
Plugging in the values:
ln(760/100) = (ΔH°vaporization/8.314) * (1/271.65 - 1/307.75)
Solve for ΔH°vaporization:
ΔH°vaporization ≈ 26.24 kJ/mol
Therefore, the value of ΔH°vaporization for diethyl ether is approximately 26.24 kJ/mol.
Learn more about Clausius-Clapeyron equation here: https://brainly.com/question/29414397
#SPJ11
Would using more sulfuric acid in the Fischer esterification reaction cause the reaction to occur faster? Use the mechanism to explain your answer.
This is part A
Write a detailed mechanism for a) the Fischer esterification of acetic acid with ethanol in the presence of sulfuric acid and b) the reaction of acetyl chloride with ethanol
I only need answer for sulfuric answer part
In fact, a Fischer esterification reaction would speed up the reaction. By encouraging the production of the electrophilic carbocation intermediate, which is necessary for ester synthesis, sulfuric acid plays a critical role in activating the Fischer esterification reaction.
a) The reason why adding more sulfuric acid speeds up the reaction is explained in greater detail below: In the Fischer esterification reaction, sulfuric acid serves as the acid catalyst as acetic acid combines with ethanol to produce ethyl acetate.
b) Reaction of Acetyl Chloride with Ethanol: Nucleophilic Attack: The lone pair of electrons on the oxygen of ethanol attacks the electrophilic carbon of acetyl chloride resulting in the formation of a tetrahedral intermediate.
Thus, a Fischer esterification reaction would speed up the reaction.
Learn more about Chloride, refer to the link:
https://brainly.com/question/34962784
#SPJ3
when ethyl benzoate is heated in methanol containing a small amount of hcl, methyl benzoate is formed. draw structural formulas for the first two intermediates in this reaction
The first intermediate in the reaction is the protonation of ethyl benzoate by the HCl to form the ethyl benzoate cation. This can be represented as:
CH3CH2OCOPh + H+ -> CH3CH2OCOPh2+
The second intermediate is the nucleophilic attack of the methanol on the ethyl benzoate cation, leading to the formation of a tetrahedral intermediate. This can be represented as:
CH3CH2OCOPh2+ + CH3OH -> CH3CH2OCOCH3 + H2O
Overall, the reaction can be represented as:
CH3CH2OCOPh + CH3OH + HCl -> CH3CH2OCOCH3 + H2O + Cl-
Learn more about nucleophilic attack here:
https://brainly.com/question/28325919
#SPJ11
determine the entropy change when 4.40 mol hbr(l)4.40 mol hbr(l) boils at atmospheric pressure.
The entropy change when a substance changes from a liquid to a gas (boiling) at a constant pressure can be calculated using the equation: the entropy change when 4.40 mol of HBr(l) boils at atmospheric pressure is 0.976 J/K
ΔS = q/T
where ΔS is the entropy change, q is the heat absorbed or released during the process, and T is the temperature at which the process occurs.
We can assume that the boiling of HBr(l) at atmospheric pressure is a reversible process, so we can use the standard molar entropy of vaporization of HBr as the value of q. According to the NIST Chemistry WebBook, the standard molar entropy of vaporization of HBr is 87.9 J/(mol·K).
We also need to know the boiling point of HBr at atmospheric pressure, which is 122.45 °C (395.6 K).
Using the equation above, we can calculate the entropy change as follows:
ΔS = q/T = (87.9 J/(mol·K)) / (395.6 K) = 0.222 J/(mol·K)
To find the total entropy change when 4.40 mol of HBr(l) boils, we need to multiply this value by the number of moles of HBr:
ΔS_total = (4.40 mol) × (0.222 J/(mol·K)) = 0.976 J/K
Therefore, the entropy change when 4.40 mol of HBr(l) boils at atmospheric pressure is 0.976 J/K
Learn more about atmospheric pressure
https://brainly.com/question/28310375
#SPJ4
Lactic Acid has a pKa of 3.08. What is the approximate degree of dissociation of a .35 M solution of lactic acid?
The degree of dissociation of the lactic acid solution is approximately 0.0000857.
Given that the pKa of lactic acid is 3.08, the approximate degree of dissociation of a .35 M solution of lactic acid can be calculated. The degree of dissociation of an acid is calculated by using the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]).
In this equation, [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid. To calculate the degree of dissociation, the concentration of the conjugate base needs to be known. By rearranging the equation to [A-] = [HA]*10^(pH-pKa) and substituting the given values for the pH and pKa, the concentration of the conjugate base can be calculated.
The concentration of the conjugate base is .35*10^(-3.08) = .0003 M. The degree of dissociation is then calculated as the ratio of the conjugate base concentration to the original acid concentration, which is .0003/.35 = .0000857.
know more about lactic acid here
https://brainly.com/question/10948414#
#SPJ11
Aside from the harvesting of electrons, the citric acid cycle generates precursors to: fatty acids
DNA
amino acids
ALL OF THESE
The citric acid cycle generates precursors to ALL OF THESE - fatty acids, DNA, and amino acids, in addition to its primary function of harvesting electrons through oxidative reactions.
The cycle provides intermediates that can be used in biosynthesis pathways to produce these important molecules for cellular function and growth.
the citric acid cycle (also known as the Krebs cycle or TCA cycle) generates precursors to fatty acids, DNA, and amino acids, in addition to its role in harvesting electrons for the electron transport chain.
The citric acid cycle is a central metabolic pathway that takes place in the mitochondria of eukaryotic cells and is responsible for the oxidation of acetyl-CoA, which is derived from carbohydrates, fats, and proteins. The cycle generates NADH and FADH2, which are important electron carriers that feed into the electron transport chain for ATP production.
In addition to generating energy in the form of ATP, the citric acid cycle also produces several key precursors that are necessary for the biosynthesis of important molecules in the body. For example, oxaloacetate, a molecule produced during the cycle, can be used to generate glucose via gluconeogenesis, or it can be converted to aspartate, which is a precursor to many amino acids.
Another important precursor generated by the citric acid cycle is alpha-ketoglutarate, which can be converted to glutamate and then to other amino acids, such as proline, arginine, and histidine. Additionally, citrate, a molecule formed in the cycle, can be transported out of the mitochondria and used as a precursor for fatty acid biosynthesis.
Overall, the citric acid cycle is an important metabolic pathway that not only generates energy but also produces key precursors for the biosynthesis of many important molecules in the body.
Learn more about amino acids here:
https://brainly.com/question/11180989
#SPJ11
Which compound, when added to a saturated solution of agcl(s), will cause additional agcl to precipitate? a. naCL b. HNO3 c. NaNO3
The compound that, when added to a saturated solution of AgCl(s), will cause additional AgCl to precipitate is a. NaCl.
When NaCl is added to the saturated AgCl solution, it provides an excess of Cl⁻ ions. According to the common ion effect, this increase in Cl⁻ ion concentration will shift the solubility equilibrium of AgCl (AgCl(s) ⇌ Ag⁺(aq) + Cl⁻(aq)) to the left, resulting in the precipitation of more AgCl.
In contrast, HNO₃ and NaNO₃ do not supply Cl⁻ ions and will not cause additional AgCl precipitation.
To know more about common ion effect click on below link:
https://brainly.com/question/28202991#
#SPJ11
alculate the concentration of an aqueous solution of naoh that has a ph of 11.09.
The concentration of the aqueous solution of NaOH with a pH of 11.09 is approximately 1.23 x 10^(-3) M.
How to calculate the concentration of a solution?To calculate the concentration of an aqueous solution of NaOH that has a pH of 11.09, follow these steps:
1. Understand the relationship between pH and pOH: pH + pOH = 14
2. Calculate the pOH: pOH = 14 - pH = 14 - 11.09 = 2.91
3. Use the pOH to find the concentration of OH- ions: [OH-] = 10^(-pOH) = 10^(-2.91) ≈ 1.23 x 10^(-3) M
4. Determine the concentration of NaOH: Since NaOH is a strong base and dissociates completely in water, the concentration of NaOH is equal to the concentration of OH- ions.
So, [NaOH] = [OH-] = 1.23 x 10^(-3) M
To know more about Concentration:
https://brainly.com/question/15928361
#SPJ11
The concentration of the aqueous solution of NaOH with a pH of 11.09 is approximately 1.23 x 10^(-3) M.
How to calculate the concentration of a solution?To calculate the concentration of an aqueous solution of NaOH that has a pH of 11.09, follow these steps:
1. Understand the relationship between pH and pOH: pH + pOH = 14
2. Calculate the pOH: pOH = 14 - pH = 14 - 11.09 = 2.91
3. Use the pOH to find the concentration of OH- ions: [OH-] = 10^(-pOH) = 10^(-2.91) ≈ 1.23 x 10^(-3) M
4. Determine the concentration of NaOH: Since NaOH is a strong base and dissociates completely in water, the concentration of NaOH is equal to the concentration of OH- ions.
So, [NaOH] = [OH-] = 1.23 x 10^(-3) M
To know more about Concentration:
https://brainly.com/question/15928361
#SPJ11
3. What preliminary test results are you looking for to identify conclusively your unknown solutions as Set B? Explain.
Set B: AgNO3(aq), Ba(NO3)2(aq), HCl(aq), H2SO4(aq), NaOH(aq)
To identify conclusively your unknown solutions as Set B, the following preliminary test results can be looked for:
By adding HCl to test the presence of Ag ions, [tex]H_{2} SO_{4}[/tex] for ([tex]Ba^{2+}[/tex] ions, [tex]AgNO_{3}[/tex] for Cl- ions, [tex](BaNO_{3})_{2}[/tex] for [tex]SO_{4} ^{2-}[/tex] ions and HCl for OH- ions.
What preliminary tests should we do to test the presence of ions?
To conclusively identify your unknown solutions as Set B, you should look for the following preliminary test results:
1. Test for the presence of silver ions (Ag+) in [tex]AgNO_{3}[/tex](aq): Add a few drops of HCl(aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of [tex]AgNO_{3}[/tex](aq).
2. Test for the presence of barium ions ([tex]Ba^{2+}[/tex]) in [tex](BaNO_{3})_{2}[/tex](aq): Add a few drops of [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If a white precipitate of [tex]BaSO_{4}[/tex] forms, it is an indication of [tex](BaNO_{3})_{2}[/tex](aq).
3. Test for the presence of chloride ions (Cl-) in HCl(aq): Add a few drops of [tex]AgNO_{3}[/tex](aq) to the unknown solution. If a white precipitate of AgCl forms, it is an indication of HCl(aq).
4. Test for the presence of sulfate ions ([tex]SO_{4} ^{2-}[/tex]) in [tex]H_{2} SO_{4}[/tex](aq): Add a few drops of Ba(NO3)2(aq) to the unknown solution. If a white precipitate of [tex]BaSO_{4}[/tex](aq) forms, it is an indication of [tex]H_{2} SO_{4}[/tex](aq).
5. Test for the presence of hydroxide ions (OH-) in NaOH(aq): Add a few drops of HCl(aq) or [tex]H_{2} SO_{4}[/tex](aq) to the unknown solution. If the solution fizzes, giving off gas, and neutralizes the acid, it is an indication of NaOH(aq).
To know more about Preliminary Tests of Ions:
https://brainly.com/question/12601152
#SPJ11
what is the density (in g/lg/l ) of hydrogen gas at 21 ∘c∘c and a pressure of 1640 psipsi ?
The density of hydrogen gas at 21°C and 1640 psi is approximately 0.090 g/L.
The ideal gas law can be used to calculate the density of a gas, given its pressure, temperature, and molar mass. Using the ideal gas law and the molar mass of hydrogen, which is 2.016 g/mol, the density of hydrogen gas at 21°C and 1640 psi can be calculated as follows:
[tex]PV = nRT[/tex]
[tex]n = PV/RT[/tex]
[tex]n = (1640 psi) (1 L/14.7 psi) / [(0.08206 L atm/mol K) (294 K)]n = 0.103 mol[/tex]
density = (n x molar mass) / volume
density = (0.103 mol) (2.016 g/mol) / (1 L)
density = 0.090 g/L
learn more about density here:
https://brainly.com/question/29775886
#SPJ11
when is it appropriate to use t distribution with n-1 degrees of freedom as a substitute for the standard normal distribution in estimating a population mean?
It is appropriate to use the t distribution with n-1 degrees of freedom as a substitute for the standard normal distribution when the sample size is small (less than 30) and the population standard deviation is unknown.
This is because the t distribution takes into account the uncertainty associated with estimating the population standard deviation from the sample standard deviation. By using the t distribution, we can obtain more accurate estimates of the population mean when working with small sample sizes. However, as the sample size increases, the t distribution approaches the standard normal distribution, and using the t distribution becomes less necessary.
To learn more about "t-distribution", visit: https://brainly.com/question/17469144
#SPJ11
What hazard does the symbol containing the hand represent?
chemical hazard
heat hazard
biohazard
radioactive hazard
Answer:
chemical hazard
Explanation:
A physiological saline solution contains 154 mEq/L each of N a + and C l − . How many moles each of N a + and C l − are in 1.0 L of the solution?
Since the molarity of a solution is defined as the number of moles of solute per liter of solution, we need to convert the given concentration of 154 mEq/L of Na+ and Cl- to molarity.
1 mole of an ion is equal to its corresponding molar equivalent weight (MEq). For Na+ and Cl-, the equivalent weight is equal to their atomic weight divided by their valency (1 for both).
The atomic weight of Na is 23 and that of Cl is 35.5.
Therefore, the molar equivalent weight of Na+ = 23 g/mol ÷ 1 = 23 g/equivalent
And the molar equivalent weight of Cl- = 35.5 g/mol ÷ 1 = 35.5 g/equivalent
To convert the concentration of 154 mEq/L to molarity:
Molarity (M) = (concentration in mEq/L) ÷ (molar equivalent weight)
For Na+:
Molarity (Na+) = 154 mEq/L ÷ 23 g/mol = 6.696 M
For Cl-:
Molarity (Cl-) = 154 mEq/L ÷ 35.5 g/mol = 4.346 M
Therefore, there are 6.696 moles of Na+ and 4.346 moles of Cl- in 1.0 L of the physiological saline solution.
Learn more about moles here:
https://brainly.com/question/26416088
#SPJ11
Calculate the ΔG°rxn using the following information.4 HNO3(g) + 5 N2H4(l) → 7 N2(g) + 12 H2O(l)ΔG°f (kJ/mol)-73.5 149.3 -237.1ΔG°rxn = ?Question 81 options:A.-3.298 x 10^3 kJB. -312.9 kJC. +110.7 kJD. +2.845 x 10^3 kJ
To calculate ΔG°rxn, we need to use the formula:
ΔG°rxn = ΣΔG°f(products) - ΣΔG°f(reactants)
First, we need to find the ΔG°f values for each compound involved in the reaction. We are given these values:
ΔG°f(HNO3) = -73.5 kJ/mol
ΔG°f(N2H4) = 149.3 kJ/mol
ΔG°f(N2) = -237.1 kJ/mol
ΔG°f(H2O) = 0 kJ/mol (since it's in its standard state)
Now, we can substitute these values into the formula:
ΔG°rxn = [7(-237.1) + 12(0)] - [4(-73.5) + 5(149.3)]
ΔG°rxn = -1659.7 - 1232.0
ΔG°rxn = -2891.7 kJ/mol
However, the question asks for the answer in kJ, not kJ/mol. So we need to divide by the number of moles of reaction (which is 1, since the coefficients are all in terms of 1 mole):
ΔG°rxn = -2891.7 kJ/mol ÷ 1 mol
ΔG°rxn = -2891.7 kJ
Therefore, the answer is B: -312.9 kJ (rounded to the nearest tenth).
brainly.com/question/31485060
#SPJ11
for the isomerization reaction of methyl isonitrile, ch3nc, to acetonitrile, ch3cn, as shown below:
cn3nc->ch3cn
the following data were obtained:
time (s) cn3nc pressure (ioit)
0 620
50 552
100 492
200 391
400 247
600 158
800 98
1.000 62
1.200 39
calculate the average rate of disappearance of ch3nc between 0 and 600 second
a.1.4 torris
b.0.35 torris
c.0.65 torris
d.0.77 torris
The average rate of disappearance of CH₃NC between 0 and 600 seconds is 0.77 torr/s (Option D).
To calculate the average rate of disappearance of CH₃NC between 0 and 600 seconds, we need to use the following formula:
Average rate = (change in pressure of CH₃NC)/(time interval)
From the given data, we can see that the pressure of CH₃NC decreases as time increases, which indicates that the isomerization reaction is taking place. Therefore, we need to calculate the change in pressure of CH₃NC between 0 and 600 seconds:
Change in pressure = (pressure at 0 seconds) - (pressure at 600 seconds)
= 620 - 158
= 462 torr
Now, we can calculate the average rate of disappearance of CH₃NC:
Average rate = (change in pressure)/(time interval)
= 462/600
= 0.77 torr/s
Therefore, the average rate of disappearance of CH₃NC between 0 and 600 second is 0.77 torr/s.
Learn more about average rate of disappearance: https://brainly.com/question/14919490
#SPJ11
Why does reaction of the metal ions with dilute Naoh limited Oh − Oh − produce the same results as the reaction with dilute aqueous nh3?
Question 1: The reaction of metal ions with dilute NaOH (Itd. OH ) produces the same result as the reaction with dilute aqueous NH3 because they are both Arrhenius bases.
The reaction of metal ions with dilute NaOH (limited OH-) produces the same result as the reaction with dilute aqueous NH3 because both NaOH and NH3 are Arrhenius bases.
An Arrhenius base is a substance that, when dissolved in water, increases the concentration of hydroxide ions (OH-) in the solution. Both NaOH and NH3 release OH- ions when dissolved in water, which then react with the metal ions to form metal hydroxide precipitates. Since both NaOH and NH3 provide hydroxide ions, they will produce similar results when reacting with metal ions.
Learn more about Arrhenius base here, https://brainly.com/question/27902993
#SPJ11
Oxidation issues. Examine the pairs of molecules and identify the more-reduced molecule in each pair.
a) ethanol or acetaldehyde
b) lactate or pyruvate
c) succinate or fumarate
d) oxalosuccinate or isocitrate
e) malate or oxaloacetate
f) pyruvate or 2-phosphoglycerate
The more-reduced molecules in each pair are: a) ethanol, b) lactate, c) succinate, d) isocitrate, e) malate, and f) 2-phosphoglycerate.
a) Ethanol is more reduced than acetaldehyde because it has more hydrogen atoms and fewer oxygen atoms in its structure.
b) Lactate is more reduced than pyruvate because it has one more hydrogen atom and one less double-bonded oxygen atom.
c) Succinate is more reduced than fumarate due to the presence of two additional hydrogen atoms in its structure.
d) Isocitrate is more reduced than oxalosuccinate because it has one more hydrogen atom and one less double-bonded oxygen atom.
e) Malate is more reduced than oxaloacetate because it has two additional hydrogen atoms.
f) 2-phosphoglycerate is more reduced than pyruvate because it has three more hydrogen atoms and one less double-bonded oxygen atom.
To know more about phosphoglycerate click on below link:
https://brainly.com/question/28610998#
#SPJ11
what are the equilibrium concentrations of cu and cl– in a saturated solution of copper(i) chloride if ksp = 1.05×10-6
In a saturated solution of copper(I) chloride, the equilibrium concentration of Cu+ and Cl- ions is 1.025 x 10⁻³ M.
What is a saturated solution's Ksp?The saturated solution of ionic substances is denoted by the symbol Ksp. (A saturated solution is in a state of equilibrium between the dissolved, dissociated, undissolved solid, and the ionic compound).
The following balanced chemical equation describes how copper(I) chloride dissolves:
CuCl(s) ⇌ Cu+(aq) + Cl-(aq)
This equilibrium's Ksp expression is as follows:
Ksp = [Cu+][Cl-]
Cu+ and Cl- will have the same equilibrium concentration (x), respectively. The Ksp expression then becomes:
Ksp = [Cu+][Cl-] = x²
By changing the specified value of Ksp, we obtain:
1.05 × 10⁻⁶ = x²
When we square the two sides, we obtain:
x = √(1.05 × 10⁻⁶) = 1.025 × 10⁻³
To know more about equilibrium visit:-
https://brainly.com/question/19267717
#SPJ1
18.how would each of the following changes affect the equilibrium position
Please help me please both 18 and19
Acidified solutions of dichromate ion, Cr2O2−7 , oxidize Fe2+ to Fe3+ forming Cr3+ in the process. What volume of 0.175 M K2Cr2O7 in mL is required to oxidize 60.0 mL of 0.250 M FeSO4 ? A 14.3 B 28.6 C 42.9 D 85. 7
The balanced chemical equation for the reaction is:
6 FeSO4 + K2Cr2O7 + 7 H2SO4 → 3 Fe2(SO4)3 + Cr2(SO4)3 + K2SO4 + 7 H2O
From the balanced equation, we see that the stoichiometric ratio of K2Cr2O7 to FeSO4 is 1:6. Therefore, we can use the following equation to calculate the amount of K2Cr2O7 needed:
moles of K2Cr2O7 = Molarity × Volume × n
where n is the stoichiometric coefficient of K2Cr2O7 in the balanced equation, which is 1.
Plugging in the values we get:
moles of FeSO4 = 0.250 M × 60.0 mL × (1/1000) L/mL = 0.015 mol FeSO4
moles of K2Cr2O7 needed = 0.015 mol FeSO4 × (1 mol K2Cr2O7/6 mol FeSO4) = 0.0025 mol K2Cr2O7
Now we can use the same equation with the molarity and moles to calculate the volume of K2Cr2O7 needed:
0.0025 mol K2Cr2O7 = 0.175 M × Volume × 1
Volume = 0.0025 mol / 0.175 M = 0.0143 L = 14.3 mL
Therefore, the volume of 0.175 M K2Cr2O7 needed to oxidize 60.0 mL of 0.250 M FeSO4 is 14.3 mL. The answer is (A) 14.3.
learn more abouT potential here:
https://brainly.com/question/24142403
#SPJ4
Determine the mass of solid NaCH₃COO that must be dissolved in an existing 500.0 mL solution of 0.200 M CH₃COOH to form a buffer with a pH equal to 5.00. The value of Ka for CH₃COOH is 1.8 × 10⁻⁵.
Find the ICE chart for CH3COOH(aq) + H2O - H3O+ + CH3COO-(aq)
And Solve for Ka= ? =1.8*10-5
To form a buffer with a pH of 5.00, you need to dissolve approximately 1.19 g of solid NaCH₃COO in the 500.0 mL solution of 0.200 M CH₃COOH.
To determine the mass of solid NaCH₃COO, you'll first need to calculate the moles of CH₃COO⁻ needed using the Henderson-Hasselbalch equation:
pH = pKa + log([A⁻]/[HA])
Step 1: Calculate pKa
pKa = -log(Ka) = -log(1.8 × 10⁻⁵) ≈ 4.74
Step 2: Plug in pH, pKa, and [HA]
5.00 = 4.74 + log([CH₃COO⁻]/[0.200 M])
Step 3: Solve for [A⁻]
[CH₃COO⁻] = 0.200 M × 10^(5.00 - 4.74) ≈ 0.229 M
Step 4: Calculate moles of CH₃COO⁻ needed
Moles of CH₃COO⁻ = (0.229 M - 0.200 M) × 0.500 L = 0.0145 mol
Step 5: Determine mass of NaCH₃COO
Mass = 0.0145 mol × 82 g/mol (molar mass of NaCH₃COO) ≈ 1.19 g
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/13423434#
#SPJ11
choose the correct resonance structures for the following compound and use the resonance structures to determine if the substituent has an electron-donating or electron-withdrawing resonance effect.
The correct resonance structures for the compound must be provided to determine the substituent's electron-donating or electron-withdrawing resonance effect.
Resonance structures are used to depict the delocalization of electrons within a molecule. The given compound must have lone pairs and pi bonds that can delocalize throughout the molecule to create resonance structures.
Once the resonance structures are identified, the substituent's electron-donating or electron-withdrawing effect can be determined by examining the electron density around the substituent in each resonance structure.
If the substituent gains electron density in at least one resonance structure, it has an electron-donating effect, whereas if it loses electron density in at least one resonance structure, it has an electron-withdrawing effect.
For more questions like Electron click the link below:
https://brainly.com/question/1255220
#SPJ11
What is the best choice of reagent(s) to perform Fisher Esterification? CH31, H2SO4 CH3OH, H2S04 NaOCH CH3L1
The best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid).
Fisher Esterification is an organic reaction that involves the conversion of a carboxylic acid and an alcohol to an ester, with a strong acid catalyst, usually sulfuric acid or hydrochloric acid.
In this case, [tex]CH_{3}OH[/tex] serves as the alcohol reactant, which reacts with the carboxylic acid to form the ester. [tex]H_{2}SO_{4}[/tex] acts as the strong acid catalyst, promoting the reaction by protonating the carbonyl oxygen atom of the carboxylic acid.
This makes the carbonyl carbon more electrophilic, allowing the nucleophilic attack by the alcohol's oxygen atom. The reaction then proceeds through a series of steps, including the formation of a tetrahedral intermediate and the loss of a water molecule.
The other reagents mentioned, NaOCH and [tex]CH_{3}L_{1}[/tex], are not suitable for Fisher Esterification. NaOCH is a base, and the reaction requires an acidic catalyst. [tex]CH_{3}L_{1}[/tex] appears to be a typographical error and does not correspond to any known reagent.
In summary, the best choice of reagent(s) to perform Fisher Esterification is [tex]CH_{3}OH[/tex] (methanol) and [tex]H_{2}SO_{4}[/tex] (sulfuric acid), as they provide the necessary alcohol and acidic catalyst for the reaction to proceed efficiently.
To know more about Fisher Esterification, refer here:
https://brainly.com/question/31041190#
#SPJ11
what is the molecular geometry of a molecule with 5 outer atoms and 1 lone pair on the central atom?
The molecular geometry of a molecule with 5 outer atoms and 1 lone pair on the central atom is trigonal bipyramidal.
To provide an explanation, the arrangement of the outer atoms and lone pair around the central atom follows the VSEPR (Valence Shell Electron Pair Repulsion) theory, which states that electron pairs in the valence shell of an atom will repel each other and try to get as far apart as possible.
In this case, the central atom has 6 electron pairs (5 from the outer atoms and 1 lone pair) and they will arrange themselves in a way that maximizes their distance from each other. The trigonal bipyramidal geometry allows for the electron pairs to be as far apart as possible while still maintaining a stable structure.
By visualizing the molecule in 3D space. The central atom will be located in the center of two three-atom planes (one above and one below) that are arranged in a triangular shape. The lone pair will occupy one of the two axial positions that are perpendicular to the triangular plane. This geometry allows for the maximum distance between electron pairs and results in a stable molecule.
However, since there is 1 lone pair, the molecular geometry will be different from the electron geometry. The lone pair will occupy one of the positions in the octahedral arrangement, while the 5 outer atoms will occupy the remaining positions, forming a square pyramid. In a square pyramidal geometry, the central atom is connected to four outer atoms in a square plane, with the fifth outer atom positioned above or below the plane. This arrangement minimizes electron repulsion, resulting in a stable molecular geometry.
To know more about VSEPR refer to
https://brainly.com/question/31162132
#SPJ11
Consider the following balanced redox reaction.
2S2O32- + I2 → 2I- + S4O62-
How many electrons are being transferred in this reaction?
a. 3
b. 1
c. 2
d. 4
The number of electrons being transferred in the reaction is (c) 2.
The balanced redox reaction given is:
2S₂O₃²⁻ + I₂ → 2I⁻ + S₄O₆²⁻
To determine the number of electrons being transferred, we need to identify the changes in oxidation states of the elements involved in the reaction. In this reaction, iodine (I) and sulfur (S) are the elements undergoing redox changes.
Initially, I₂ has an oxidation state of 0 (elemental form). In the product, I⁻, its oxidation state changes to -1. Since there are two iodine atoms in I₂, each gaining one electron, a total of 2 electrons are gained by iodine.
Sulfur, on the other hand, starts with an oxidation state of +2 in S₂O₃²⁻ and changes to +2.5 in S₄O₆²⁻. As there are four sulfur atoms in 2S₂O₃²⁻ and four sulfur atoms in S₄O₆²⁻, the overall change in the oxidation state of sulfur is (4 x +2.5) - (4 x +2) = 2.
The change in oxidation state of sulfur indicates that it loses 2 electrons, which are subsequently gained by iodine. Therefore, the total number of electrons being transferred in this reaction is 2 (option c).
Learn more about redox reaction here: https://brainly.com/question/459488
#SPJ11