For each of the following systems, determine whether or not the system is (1) linear, (2) time-invariant, and (3) causal: a. y[n]=x[n]cos(0.2πn) b. y[n]=x[n]−x[n−1] c. y[n]=∣x[n]∣ d. y[n]=Ax[n]+B, w
here A and B are nonzero constants.

Answers

Answer 1

Let's analyze each system to determine whether it is linear, time-invariant, and causal:

a. y[n] = x[n]cos(0.2πn)

1) Linearity: This system is not linear because it contains a nonlinear operation, the cosine function. When applying a linear combination of inputs, the output will involve the cosine of the linear combination, which does not satisfy the superposition property.

2) Time-invariance: This system is time-invariant because the cosine function does not depend on the specific time instance n. Shifting the input x[n] will result in a corresponding shift in the output y[n].

3) Causality: This system is causal because the output y[n] only depends on the current and past values of the input x[n]. It does not rely on future values.

b. y[n] = x[n] - x[n-1]

1) Linearity: This system is linear because it satisfies the superposition property. Applying a linear combination of inputs will result in a linear combination of outputs.

2) Time-invariance: This system is time-invariant because shifting the input x[n] by a delay will cause the output y[n] to shift by the same delay.

3) Causality: This system is causal because the output y[n] only depends on the current and past values of the input x[n]. It does not depend on future values.

c. y[n] = |x[n]|

1) Linearity: This system is not linear because it does not satisfy the superposition property. Taking the absolute value of a linear combination of inputs does not result in the same linear combination of outputs.

2) Time-invariance: This system is time-invariant because shifting the input x[n] by a delay will result in the same delay in the output y[n].

3) Causality: This system is causal because the output y[n] only depends on the current and past values of the input x[n]. It does not depend on future values.

d. y[n] = Ax[n] + B (A and B are nonzero constants)

1) Linearity: This system is linear because it satisfies the superposition property. Applying a linear combination of inputs will result in a linear combination of outputs.

2) Time-invariance: This system is time-invariant because it does not depend on the specific time instance n. Shifting the input x[n] will not affect the output y[n].

3) Causality: This system is causal because the output y[n] only depends on the current and past values of the input x[n]. It does not depend on future values.

In summary:

a. Not linear, Time-invariant, Causal

b. Linear, Time-invariant, Causal

c. Not linear, Time-invariant, Causal

d. Linear, Time-invariant, Causal


Related Questions

1. which of the following access modifiers should be used if you want the member to be accessible to all external code
a. public
b. any access modifier would be ok
c. default(package)
e. protected
f. private

Answers

If you want a member to be accessible to all external codes, the access modifier you should use is public. The public access modifier allows members to be accessible from any other code, either within or outside of the same assembly or program.

There are four access modifiers in C# which are private, protected, public, and internal. When an access modifier is applied to a member of a class, it dictates the level of visibility or accessibility of the member to other codes or other classes.

Here's a brief explanation of the four access modifiers:

Private - members are accessible only within the containing class.

Protected - members are accessible within the containing class and within any subclass derived from the containing class.

Public - members are accessible from any code within or outside of the program or assembly. Internal - members are only accessible from within the same assembly or program.

In summary, if you want a member to be accessible to an external code, the best option is to use the public access modifier, which allows the member to be accessed from any other code.

know more about access modifiers,

https://brainly.com/question/30899072

#SPJ11

Draw the unabbreviated logic diagram for the following Boolean expressions:
a. ab + ab

Answers

The brains of digital electronics are logic gates. A logic circuit truth table is necessary to comprehend the nature of the function that logic circuits are supposed to fulfill.

Thus, A circuit is created by connecting logic gates.  A gate is a piece of electrical equipment that computes a function on a signal with two values. Digital circuits' fundamental building block is the logic gate.

The symbols and gates in the logic diagram can directly swap out a Boolean arithmetic expression.

One or more of the Boolean logic operations AND, NAND, NOR, NOT, OR, XNOR, and XOR can be carried out by a logic gate. Every type of logic gate accepts two binary digits as input and outputs one binary digit, with the exception of NOT.

Thus, The brains of digital electronics are logic gates. A logic circuit truth table is necessary to comprehend the nature of the function that logic circuits are supposed to fulfill.

Learn more about Logic gates, refer to the link:

https://brainly.com/question/30195032

#SPJ4

Which of the following statements causes a ValueError to occur? a. try ValueError b. raise ValueError c. except ValueError d. except

Answers

The statement that causes a ValueError to occur is "raise ValueError". Therefore, the correct option is B. raise ValueError.

Python raise keyword is used to raise an exception, which is an error that is raised under particular conditions, for example, in response to an invalid input data type that your code cannot process. It is utilized to raise an exception manually when a specific condition is not met. Python has several built-in exceptions that can be raised to indicate that an error has occurred. A common exception raised by Python is ValueError, which is raised when the type of data being processed is incorrect, and it cannot be converted to the desired format.

In Python, there are some terms that are used for Exception Handling. These are:try, except, else, finally. The 'try' statement is used for Error Checking. An exception is an error that occurs during execution of a program. They can be handled in Python using the 'try' statement. The 'except' statement catches the exceptions raised during the execution of a try block. Here, ValueError refers to a specific type of exception that you want to catch and handle. The 'raise' keyword allows you to raise an exception explicitly and on purpose. It is used to throw an exception when a certain condition is not met. Therefore, the correct option is B. raise ValueError.

Learn more about ValueError here:

https://brainly.com/question/30762919

#SPJ11

A venturi meter, which has a throat diameter of 4 cm, needs to be installed in a pipe of inner diameter of 10 cm. If the minimum pressure drop measured by a mercury manometer is 1.5 cm, what will be the minimum flow of water at 25°C that can be recorded? Assume the coefficient of venturi meter is 0.98 and density of water at 25°C is 997 kg/m3 .

Answers

The minimum flow of water that can be recorded is 0.1503 L/s.

Venturi meter is an instrument used to measure the flow rate of fluid in a pipeline. It works on the principle of Bernoulli's equation. A reduction in the area of the pipeline leads to an increase in the velocity of the fluid flow and a decrease in the pressure of the fluid. The diameter of the throat of the venturi meter is much smaller than the diameter of the pipeline.

The given parameters are: Diameter of throat, d1 = 4 cm. Diameter of pipeline, d2 = 10 cm. Pressure difference, ΔP = 1.5 cm. Density of water, ρ = 997 kg/m³Coefficient of venturi meter, C = 0.98Temperature, T = 25°C.

We need to calculate the minimum flow of water that can be recorded. The formula for the flow rate of fluid through the venturi meter is: Q = C x A1 x v1. Where, Q = flow rate of fluid. C = coefficient of venturi meterA1 = area of the throat of venturi meterV1 = velocity of the fluid at the throat of the venturi meter.

Area of the throat of venturi meter, A1 can be calculated as:A1 = πd1²/4A1 = (22/7) x (4/100)²/4A1 = 1.257 x 10⁻⁴ m². Using Bernoulli's equation, the velocity of the fluid at the throat of the venturi meter can be calculated as:v1 = √(2ΔP/ρ)(1 - (d1/d2)⁴).

Where,√ = square root of2 = constantΔP = pressure difference ρ = density of waterd1 = diameter of the throat of venturi meterd2 = diameter of the pipelinev1 = √(2 x 1.5/997) x (1 - (4/10)⁴) v1 = 12.06 m/s.

The minimum flow of water can be calculated as:Q = 0.98 x 1.257 x 10⁻⁴ x 12.06Q = 1.503 x 10⁻⁴ m³/sQ = 0.1503 L/s. Hence, the minimum flow of water that can be recorded is 0.1503 L/s.

know more about Venturi meter

https://brainly.com/question/31568980

#SPJ11

A valid call to the following method using a params parameter is:
public static void DoSomething(params int[ ] item)
a. DoSomething(4);
b. DoSomething(anArray);
c. DoSomething(4, 5, 6);
d. a and c are correct
e. all are correct

Answers

The correct answer is d. A and c are correct. The method signature indicates that we can call the method with a variable number of parameters.

The method can receive one or more integers, so options a and c are both correct options. Here's a more detailed explanation of each

option: a. Do Something(4); This is a valid call to the DoSomething method. The method is called with a single integer parameter, 4.b. DoSomething(anArray); This is not a valid call to the DoSomething method. The parameter is an array, but the method expects a variable number of integers. c. DoSomething (4, 5, 6); This is a valid call to the DoSomething method. The method is called with three integer parameters: 4, 5, and 6.d. a and c are correct. This is the correct option. Both a and c are valid calls to the DoSomething method. e. All are correct. This option is not correct because option b is not a valid call to the DoSomething method.

know more about method signature

https://brainly.com/question/32386529

#SPJ11

Select the operational amplifier circuit that will give the following outputs:
10. An output that is a linear function of the input.
11. An output that always has a voltage gain of 1.
12. An output that is proportional to the integral of the input voltage.
13. For the operational amplifier circuit shown in the following figure:
3R
R
R
3R
Output
The output is:
A Three times the sum of V and V2.
B Three times the difference between V₁ and V2.
C Twice the sum of V₁ and V2.
D Twice the difference between V₁ and V2.
14. The operational amplifier circuit shown in the following figure includes a thermistor.
V+
100
Thermistor
300 Ω
100
The relay must be activated when the thermistor resistance is:
A Less than 100 A.
B 200 A.
C Between 100 and 300 A.
D More than 300 A.
15. Decide whether each of these statements is TRUE (T) or FALSE (F).
The Wheatstone bridge shown

Answers

The given diagram is not available to determine whether the given statement is true or false. Therefore, the answer can not be provided.

An operational amplifier circuit that gives an output that is a linear function of the input is an inverting amplifier circuit.11. The non-inverting amplifier circuit will always have a voltage gain of 1.12. The integrator circuit will give an output that is proportional to the integral of the input voltage.13. The given operational amplifier circuit can be redrawn as:Now, as per the circuit, the output will be = 3V - V2 or 3 times the difference between V1 and V2.Therefore, the correct option is (B).14. As per the given circuit diagram, the relay will be activated when the thermistor resistance is less than 100 Ω.Therefore, the correct option is (A).15. The given diagram is not available to determine whether the given statement is true or false. Therefore, the answer can not be provided.

Learn more about  operational amplifier circuit here:

https://brainly.com/question/32294201

#SPJ11

considering the fact that solar radiation travels in a straight line, explain why you can see an apple on the ground directly under an apple tree.

Answers

If you observe an apple lying under the tree from where it fell, it is due to the sunlight, which serves as a solar radiation source, directly reaching it.

What is  solar radiation

Solar energy, including the visible spectrum, moves straight ahead until it meets with an obstacle or gets dispersed due to particles present in the atmosphere.

The presence of an apple tree creates a shaded area, as its abundant branches and leaves obstruct a fraction of sunlight from hitting the ground. Nonetheless, gaps in the foliage allow sunlight to permeate and reach the earth's surface.

The Direct Path occurs when the shadow of an apple hanging from a tree falls straight onto the ground, resulting in a shaded spot where the apple obstructs the flow of sunlight.

Learn more about radiation from

https://brainly.com/question/31285748

#SPJ4

For a bronze alloy, the stress at which plastic deformation begins is 284 MPa and the modulus of elasticity is 106 GPa. (a) What is the maximum load that can be applied to a specimen having a cross-sectional area of 310 mm2 without plastic deformation? (b) If the original specimen length is 120 mm, what is the maximum length to which it may be stretched without causing plastic deformation?

Answers

Answer:

a) the maximum load is 88,040 N

b)

the maximum length to which the specimen may be stretched is 0.12032148 mm

Explanation:

Given the data in the question;

the stress at which plastic deformation begins σ = 284 MPa = 2.84 × 10⁸ Pa

modulus of elasticity E = 106 GPa = 1.06 × 10¹¹ Pa

a)

Area A = 310 mm² = 310 × 10⁻⁶ m ( without plastic deformation )

now, lets consider the equation relating to stress and cross sectional area.

σ = F / A₀

hence, maximum load F = σA₀  

so we substitute

F = (2.84 × 10⁸) × (310 × 10⁻⁶)

F = 88,040 N

Therefore, the maximum load is 88,040 N

b)

Initial length specimen l₀ = 120 mm  = 120 × 10⁻³ m

using engineering strain, ε = (l₁ - l₀)/l₀

Also from Hooke's law, σ = Eε

so from the equation above;

l₁ = l₀( ε + 1 )

l₁ = l₀( σ/E + 1 )

so we substitute

l₁ = (120 × 10⁻³)( (2.84 × 10⁸)/(1.06 × 10¹¹)) + 1 )

l₁ = (120 × 10⁻³) ( 1.002679 )

l₁ = 0.12032148 mm

Therefore, the maximum length to which the specimen may be stretched is 0.12032148 mm

Orders for a stock trading system are coded as follows from left to right i. The first character is 'B' for a "buy" order, 'S' for a "sell" order ii. The number of shares to buy or sell iii. The stock ticker symbol in all uppercase letters for a "buy" order or all lowercase letters for a "sell" order iv. If the order is a "limit" order with a specific buy/sell price, the requested price in pennies, otherwise the price should be omitted and the order will be a market order at the current asking price for the stock v. If the order is a "limit" order with an expiration time, the character 'T' followed by the number of minutes until the order expires and should no longer be executed Note that the order code may only contain letters and numbers. It may not include comma, hyphen, etc. What would the code be for a limit order to sell 2,500 shares of Oracle stock (ticker symbol: ORCL) at $40.00 a share?

Answers

The code for a limit order to sell 2,500 shares of Oracle stock (ticker symbol: ORCL) at $40.00 a share would be "S2500orcl40".

Let's break down this code to understand its components and their meanings.

The first character in the code is 'S', which indicates a "sell" order. It signifies that the intention is to sell the specified number of shares rather than buying them.

Next, "2500" represents the quantity of shares to be sold. In this case, it is 2,500 shares of Oracle stock.

The ticker symbol for Oracle stock is "orcl". Ticker symbols are typically written in uppercase letters for "buy" orders, but for a "sell" order, they are written in lowercase letters.

The code continues with "40", which represents the requested price per share in pennies. In this scenario, the limit order specifies a selling price of $40.00 per share. The price is converted to pennies for uniformity in the order code.

By combining these elements together, we have the complete code "S2500orcl40" for a limit order to sell 2,500 shares of Oracle stock at $40.00 per share.

It's important to note that the order code should adhere to certain rules, such as not including special characters like commas or hyphens. It should only consist of letters and numbers for accurate processing in the stock trading system.

This code effectively communicates the details of the limit sell order for the desired quantity and price, allowing the stock trading system to execute the order accurately and efficiently.

Learn more about code  here:-

https://brainly.com/question/27397986
#SPJ11

Formulate the following 15 queries: (note, for some queries, you may need to use the combination of join and subquery or correlated subquery, together with group by and having clauses). List the name of division (d) that has employee(s) who works on a project (p) not sponsored by this division. (hint in a correlated subquery with where …. and d.did <> p.did)

Answers

List the name of the division that has employee(s) working on a project not sponsored by the division.

To formulate this query, we can use a combination of join, subquery, and a correlated subquery, along with the WHERE clause to filter the results. Here's how we can approach it:

1. Start by selecting the division name (dname) from the "division" table.

2. Join the "division" table with the "employee" table using the division ID (did) as the common attribute.

3. Join the "employee" table with the "works_on" table using the employee ID (eid) as the common attribute.

4. Join the "works_on" table with the "project" table using the project ID (pid) as the common attribute.

5. In the WHERE clause, add a condition to check if there exists an employee (e1) in the division (d) who is working on a project (p) that is not sponsored by the same division. This can be done using a correlated subquery.

  - In the subquery, select any employee (e2) from the same division (d) who is working on a project (p2) that is sponsored by the division (d).

  - Include the condition "WHERE d.did <> p2.did" to ensure that the project is not sponsored by the division.

  - Link the subquery to the outer query using the division ID (did).

  - Add the condition "AND d.did <> p.did" to check that the project the employee is working on is not sponsored by the division itself.

6. Use the GROUP BY clause to group the results by division name (dname).

7. Optionally, you can use the HAVING clause to further filter the results if needed.

The resulting query will provide the names of the divisions that have employees working on projects not sponsored by their respective divisions.

Learn more about project here :-

https://brainly.com/question/28476409

#SPJ11

Identify the correct product obtained via the reaction of Butan-2-one under the six conditions outlined below.
1. Sodium Borohydride followed by work up.
2. Methyl lithium followed by work up.
3. Isopropyl magnesium bromide followed by work up.
4. Methyl triphenylphosphonium bromide and a base.
5. Two equivalents of methanol in the presence of an acid catalyst.
6. Zinc amalgam and hydrochloric acid.
Identify the correct product obtained via the reaction of propanal under the six conditions outlined below.
1. Sodium Borohydride followed by work up.
2. Methyl lithium followed by work up.
3. Isopropyl magnesium bromide followed by work up.
4. Methyl triphenylphosphonium bromide and a base.
5. Two equivalents of methanol in the presence of an acid catalyst.
6. Zinc amalgam and hydrochloric acid.
Identify the correct product obtained via the reaction of 3-methylbutan-2-one under the six conditions outlined below.
1. Sodium Borohydride followed by work up.
2. Methyl lithium followed by work up.
3. Isopropyl magnesium bromide followed by work up.
4. Methyl triphenylphosphonium bromide and a base.
5. Two equivalents of methanol in the presence of an acid catalyst.
6. Zinc amalgam and hydrochloric acid.

Answers

The product gotten from the reaction of Butan-2-one with sodium borohydride followed by work up is Butan-2-ol (2-Butanol).

The product gotten from the reaction of Butan-2-one with methyl lithium followed by work up is 3-Methylbutan-2-ol.The product gotten from the reaction of Butan-2-one with isopropyl magnesium bromide followed by work up is 3-Methyl-2-(propyl)butan-2-ol.

What is the product

The product of Butan-2-one with methyl triphenylphosphonium bromide and a base is a substituted ketone, depending on the chosen base.

The result of reacting Butan-2-one with two methanol equivalents and an acid catalyst is a mixture of methyl ethers (dependent on conditions). The reaction of Butan-2-one with zinc amalgam and hydrochloric acid produces 2-Butanol.

Learn more about   Butan-2-one from

https://brainly.com/question/31504719

#SPJ4

9. Go to the Earnings Projections worksheet. Pranjali has entered most of the income and expense data on the worksheet. She knows the income from municipal grants will be $25,000 in 2022, and estimates it wil be $40,000 in 2026 . She needs to calculate the income from municipal grants in the years 2023-2025. The grants should increase at a constant amount from year to year. Project the income from Municipal grants for 2023-2025 (cels D5:F5) using a Linear Trend interpolation. Fil a ronge using interpolation. In the Eamings Projections worksheet, one or more cells in the range D5:F5 contains incorrect values.

Answers

The projected income from municipal grants for the years 2023-2025 using a linear trend interpolation is as follows:

2023: $28,750

2024: $32,500

2025: $36,250

Given that Income from municipal grants in 2022: $25,000

Income from municipal grants in 2026: $40,000

First, we need to find the constant amount of increase per year. We can calculate this by subtracting the initial value from the final value and dividing it by the number of years in between:

Constant increase = (Final value - Initial value) / (Number of years)

Constant increase = ($40,000 - $25,000) / (2026 - 2022)

= $15,000 / 4

= $3,750

Now we can project the income from municipal grants for the years 2023-2025 by adding the constant increase to the previous year's value.

For 2023:

Income from municipal grants = Income from municipal grants in 2022 + Constant increase

= $25,000 + $3,750

= $28,750

For 2024:

Income from municipal grants = Income from municipal grants in 2023 + Constant increase

= $28,750 + $3,750

= $32,500

For 2025:

Income from municipal grants = Income from municipal grants in 2024 + Constant increase

= $32,500 + $3,750

= $36,250

To learn more on Linear Interpolation click:

https://brainly.com/question/30766144

#SPJ12

A 5% upgrade on a six-lane freeway (three lanes in each direction) is 1.25 mi long. On this segment of freeway, the directional peak-hour volume is 3800 vehicles with 2% large trucks and 4% buses (no recreational vehicles), the peak-hour factor is 0.90, and all drivers are regular users. The lanes are 12 ft wide, there are no lateral obstructions within 10 ft of the roadway, and the total ramp density is 1.0 ramps per mile. A bus strike will eliminate all bus traffic, but it is estimated that for each bus removed from the roadway, seven additional passenger vehicles will be added as travelers seek other means of travel. What are the density, volume-to-capacity ratio, and level of service of the upgrade segment before and after the bus strike?

Answers

Answer:

a) Density of the road segment

i) Before bus strike = 23.02 pc/mi/In

ii) after bus strike = 25.76 pc/mi/In

b) Volume to capacity ratio

i) Before bus strike = 0.69

ii) After bus strike = 0.78

C) level of service of the upgrade segment

i) Before bus strike = LOS C

ii) after bus strike = LOS D

Explanation:

a) Density of the road segment

i) before bus strike ( D1 )

 D1 = 1662 / 72.18  = 23.02 pc/mi/In

ii) After bus strike ( D2 )

D1 = 1859 / 72.18 = 25.76 pc/mi/In

b) Volume to capacity ratio

i) Before bus strike ( v 1 )

V1 = 1662 / 2400 = 0.69

ii) After bus strike ( V2 )

V2 = 1859 / 2400 = 0.78

C) level of service of the upgrade segment  ( Gotten from " LOS Criteria for basic freeway segments " )

i) Before bus strike =  ( LOS C )

ii) After bus strike  = LOS D

Attached below is the detailed solution to the question above

.Organizations should work to improve process capability so that quality control efforts can become more ________.
A. effective
B. efficient
C. necessary
D. unnecessary
E. widespread

Answers

The correct answer is A. effective. Organizations should work to improve process capability so that quality control efforts can become more effective.

Process capability refers to the ability of the process to generate products that are within the required specifications. When the process capability is high, there will be fewer errors and defects in the final product. As a result, quality control efforts will become more effective. Quality control involves the processes and activities that are used to ensure that the final product meets the required quality standards. Quality control is an important part of any organization that wants to produce high-quality products that meet the needs of its customers. Improving process capability is one way to enhance quality control efforts. When process capability is improved, the processes become more consistent, and there is less variation in the final product. This means that it is easier to identify any issues that arise during the quality control process and to take corrective action. This leads to more effective quality control efforts, which ultimately results in higher quality products. In conclusion, organizations should work to improve process capability so that quality control efforts can become more effective.

Learn more about Organizations here:-

https://brainly.com/question/28039920

#SPJ11

assume that the kvcu antenna is a half-wave transmitting antenna (oriented vertically with respect to the ground). how tall should it be?

Answers

To determine the height of a half-wave transmitting antenna like the KVCU antenna, we need to calculate the wavelength and then divide it by two.

The formula to calculate the wavelength is:

Wavelength = Speed of Light / Frequency

Assuming we know the frequency at which the antenna operates, we can substitute the values into the formula to find the wavelength.

For example, if the frequency is 100 MHz (100,000,000 Hz), and the speed of light is approximately 3 x 10^8 meters per second, the calculation would be:

Wavelength = (3 x 10^8) / (100 x 10^6) = 3 meters

Once we have the wavelength, we divide it by two to determine the height of the half-wave antenna:

Height = Wavelength / 2 = 3 meters / 2 = 1.5 meters

Therefore, for a half-wave transmitting antenna like the KVCU antenna, it should have a height of approximately 1.5 meters when oriented vertically with respect to the ground.

Learn more about antenna here

https://brainly.com/question/31545407

#SPJ11

In the context of mechanical systems, what does the term efficiency mean? OA the factor by which a machine multiplies a force B. the ratio of a machine's power to the force of its input Ос. the rate at which a machine performs work D. the rate at which a machine consumes energy E. the ratio of the work output of a machine to the work input​

Answers

Answer:

E

Explanation:

I have a big brain and I just took the test and got it correct.

a biodegradable industrial (petrochemical) wastewater has a cod of 600 mg/l. if the bod progression follows first-order kinetics with a rate con- stant = 0.20 day–1, determine the bod5.

Answers

Answer is BOD5 = 600 - 260.61 = 339.39 mg/L.

Biodegradable Industrial WastewaterA wastewater with a COD of 600 mg/L is biodegradable industrial (petrochemical) wastewater. The wastewater's biodegradability is a result of the presence of organic compounds that can be decomposed by aerobic or anaerobic microorganisms. The first step in estimating biodegradability is to determine the Biochemical Oxygen Demand (BOD) of the wastewater. BOD5 is an abbreviation for the biochemical oxygen demand (BOD) of water after five days of incubation at 20 °C. The BOD5 value measures the amount of oxygen consumed by the bacteria over a five-day incubation period, and it is an indication of the wastewater's organic matter content's biodegradability.Calculating BOD5 from First Order KineticsThe biodegradation rate is proportional to the quantity of organic matter remaining in the wastewater, according to first-order kinetics. The equation for first-order kinetics is given as:dC/dt = -kCwhere C is the concentration of organic matter, t is time, and k is the rate constant. If the initial concentration of organic matter is C0, the solution to the above equation is:C = C0e-ktyou must find the value of k to calculate BOD5 from first-order kinetics. According to the problem statement, the rate constant is k = 0.20 day-1. Thus, the equation to determine the amount of organic matter remaining after five days of incubation (C5) is:C5 = C0e-kt5For the given problem, C0 = 600 mg/L, and t5 = 5 days. Substituting these values in the above equation: C5 = 600*e^(-0.2*5) = 260.61 mg/LTherefore, the BOD5 of the biodegradable industrial wastewater is 600 - 260.61 = 339.39 mg/L.Explanation:BOD5 = 600 - 260.61 = 339.39 mg/L.  

Learn more more about biodegradable industrial (petrochemical) wastewater here,

https://brainly.com/question/31497335

#SPJ11

Given a 2-dimensional array with the following declaration:
int myArray[4][9];
How would you pointer arithmetic to calculate the position of the element myArray[3][2]?
Note, this is independent of the size of the array elements because C will offset based on the size of the array element. For example myArray+4 would be the position of the 5th element in the array (i.e., element myArray[1][0]).

Answers

To calculate the position of the element myArray[3][2] using pointer arithmetic, you can use the following formula:

[tex]*(myArray[0] + 3 * 9 + 2)[/tex]

In a 2-dimensional array in C, the elements are stored in contiguous memory locations row-wise. So, the number of rows (4 in this case) determines the stride of the array.

To calculate the position of myArray[3][2], we need to take into account the row stride and the column index. Here's the step-by-step explanation:

Since myArray is a 2-dimensional array, the expression myArray[0] represents the memory location of the first element in the first row.

To access the element myArray[3][2], we need to move 3 rows down and 2 columns to the right from the starting position.

Considering each row has 9 elements (as given in the declaration), we multiply the number of rows (3) by the number of columns (9) to determine the offset caused by moving 3 rows down. This gives us 3 * 9.

Finally, we add the column index (2) to the offset obtained in the previous step to account for the 2 columns we need to move to the right.

By dereferencing the calculated memory location using the * operator, we can access the value stored at myArray[3][2].

Putting it all together, the pointer arithmetic expression to calculate the position of myArray[3][2] would be [tex]*(myArray[0] + 3 * 9 + 2)[/tex]

To learn more about Array: https://brainly.com/question/28061186

#SPJ11

Find solutions for your homework
engineeringcomputer sciencecomputer science questions and answersquestion 14 1 points save answer match the name of the approach towards implementing a control plane with a description of how this approach works. v per-router control plane. a. a typically) remote controller computes and installs forwarding tables in routers. ? software-defined networking (sdn). b. an individual routing algorithm components in each and
Question: Question 14 1 Points Save Answer Match The Name Of The Approach Towards Implementing A Control Plane With A Description Of How This Approach Works. V Per-Router Control Plane. A. A Typically) Remote Controller Computes And Installs Forwarding Tables In Routers. ? Software-Defined Networking (SDN). B. An Individual Routing Algorithm Components In Each And

Show transcribed image text
Expert Answer
1st step
All steps
Final answer
Step 1/1
Two functions of the network layer are forwarding and routing.
Packet forwarding - It includes forwarding packets that enter the router to the appropriate router output.
Packet routing - Packet routing involves the process of determining the route taken by packets to reach their destination.
View the full answer

Final answer
Transcribed image text: 
Question 14 1 points Save Answer Match the name of the approach towards implementing a control plane with a description of how this approach works. v Per-router control plane. A. A typically) remote controller computes and installs forwarding tables in routers. ? Software-defined networking (SDN). B. An individual routing algorithm components in each and every router interact in the control plane C. The network operator installs forwarding tables using the Simple Network Management Protocols (SNMP).

Answers

The per-router control plane is a control plane approach that has individual routing algorithm components in each and every router interacting in the control plane.

This means that the control plane is distributed in each router in the network, and these routers are responsible for their own route computation and forwarding decisions. Hence, each router has its own view of the network topology and calculates the path to be taken by each packet. This approach to implementing a control plane is most suitable for small to medium-sized networks that are not very complex. It is efficient because it doesn't require a central authority to be responsible for the network's operations. Since each router is responsible for its own route calculation and forwarding decisions, it is quick to respond to network changes and is fault-tolerant since it does not depend on a single entity for its operation. In contrast, software-defined networking (SDN) is an approach in which a typically remote controller computes and installs forwarding tables in routers.

know more about per-router

https://brainly.com/question/32243033

#SPJ11

Which of the following is the most appropriate beginning for a letter of transmittal? Begin the transmittal with a brief paragraph that says, essentially, "Here is the report." Briefly identify the report's contents and purpose and, if appropriate, its authorization (who assigned the report, when, and why).

Answers

A letter of transmittal is a cover letter that accompanies a document such as a report, research paper, or other types of assignments. It briefly describes the contents of the document and offers the sender's perspective on its meaning and significance.

The most appropriate beginning for a letter of transmittal is to begin with a brief paragraph that says, essentially, "Here is the report." Briefly identify the report's contents and purpose and, if appropriate, its authorization (who assigned the report, when, and why). A letter of transmittal is a cover letter that accompanies a document such as a report, research paper, or other types of assignments. It briefly describes the contents of the document and offers the sender's perspective on its meaning and significance.

Learn more about  research paper here:

https://brainly.com/question/1599676

#SPJ11

EXERCISE 7.9.2 A thin-walled hollow sphere 2 m in diameter is subjected to internal pressure po. The wall thickness is 5 mm and the yield stress of the material is 250 MPa. Use both Tresca and von Mises yield criteria to determine the maximum internal pressure po that does not cause yielding Feedback? EXERCISE 7.9.3 Consider the problem of Example 7.3.1. Find the maximum po without causing yielding if N = 50 x 10^6 N (compression).

Answers

The maximum po without causing yielding if N = 50 x 10⁶ N is -35.14 MPa..

Exercise 7.9.2 is given as follows:A thin-walled hollow sphere of 2 m diameter is exposed to an internal pressure, po. The thickness of the wall is 5 mm, and the material's yield stress is 250 MPa. To determine the maximum internal pressure po, which does not cause yielding, utilize both the Tresca and von Mises yield criteria.Solution:The radius of the sphere, R = 1 m = 1000 mmThe wall thickness, t = 5 mmTherefore, the inner radius, r = R - t = 1000 - 5 = 995 mm = 0.995 mThe following formulas can be used to calculate maximum internal pressure po using the Tresca and von Mises yield criteria:Tresca Yield Criteria:t=2sy/√3{((po/pi)+(p0/pi))/((po/pi)-(p0/pi))}=2(250)/√3{((po/pi)+(0))/((po/pi)-(0))}=(500/√3)(po/(pi-po))Here, the pi is the initial pressure, and po is the internal pressure to be determined.Von Mises Yield Criteria:t=2sy/√(3){√(1+4((po/pi)-(p0/pi))^2-1}=2(250)/√(3){√(1+4((po/pi)-0)^2-1}=(500/√(3)){√(4((po/pi))^2+3}/(2(po/pi))Here, the pi is the initial pressure, and po is the internal pressure to be determined.For both Tresca and von Mises yield criteria, we need to substitute the values and solve the equations.(500/√3)(po/(pi-po))=(500/√(3)){√(4((po/pi))^2+3}/(2(po/pi))(po/(pi-po))={√(4((po/pi))^2+3)}/(2(pi/pi-pi))=√(4((po/pi))^2+3)/((pi-po)/pi)√(4((po/pi))^2+3)=(po/pi-po)(√(3)/2)4((po/pi))^2+3=(3/4)(po/pi-po)^2Solving the above equation, we get the value of po. Therefore, po = 2.25 pi N/m².Exercise 7.9.3 is given as follows:The maximum po that does not cause yielding is to be determined if N = 50 x 10^6 N (compression).Solution:The value of N is given in the negative direction because it is in compression.In this case, we have the following formulas for the maximum pressure po:Tresca Yield Criteria:σ1-σ2=(p0+po)(1/r-1/R)=N/Aσ1+σ2=(p0+po)/2σ1-σ2=2sy/√3√3(p0+po)/(R-r)=2sy/√3N/A=(R-r)/2σ1+σ2=2sy/3+σ2=2sy/3+(p0+po)/2For σ1,σ2, we have the following relations:σ1+σ2=(p0+po)/2σ1-σ2=2sy/√3Therefore,σ1=(p0+po)/2+(sy/√3)σ2=(p0+po)/2-(sy/√3)We can now replace σ1, σ2 in the first equation to get the value of po. After solving for po, we get po = -35.14 MPa.

Learn more about diameter here,

https://brainly.com/question/28162977

#SPJ11

Explain why the sequence of drilling, boring, and reaming produces a hole that is more accurate than drilling and reaming itonly. Q4 Why would machining operations be necessary even on net-shape or near-net- shape parts made by precision casting, forming. or powder metallurgy products. as described in preceding chapters? Explain. Q5 Explain the similarities and differences in the design guidelines for turning and for boring. Q6 Assume that you are asked to perform a boring operation on a large-diameter hollow workpiece. Would you use a horizontal or a vertical boring mill? Explain. Q6 in modern manufacturing, which types of metal chips would be undesirable and why? 23.41 Calculate the same quantities as in Example 23.1 for high-strength titanium alloy and at N 700 rpm. 23.42 Estimate the machining time required to rough turn a 0.50-m-long annealed copper-alloy round bar, from a 60-mm diameter to a 58-mm diameter, using a high speed steel tool. (See Table 23.4.) Estimate the time required for an uncoated carbide tool. 2344 A 7.5 mm-diameter drill is used on a drill press operating at 300 rpm. If the feed is 0.125 mm/rev, what is the MRR? What is the MRR if the drill diameter is doubled 23.45 In Example 23.4, assume that the workpiece material is high-strength aluminum alloy and the spindle is running at N 500 rpm. Estimate the torque required for this operation. Ch

Answers

There are rotational and nonrotational types of machined parts. Option (a) boring and option (d) planing are two examples of operations that produce nonrotational geometries.

Boring is a type of machining that enlarges an existing hole to the desired diameter, resulting in a straight, parallel-walled cylinder. Planing, on the other hand, removes material in a linear fashion to create flat surfaces. A surface with straight edges and a flat surface are the resulting shapes.

Rotational geometries can be created through operations like drilling and turning. The process of drilling involves removing material in a rotary motion to form a hole that has a circular cross-section. In contrast, turning is the process of removing material with a rotating cutting tool to create round geometries.

Depending on the milling process used, milling can result in both rotational and nonrotational geometries. Nonrotational geometries are produced by moving the cutting tool in a linear motion while rotational geometries are produced by rotating the workpiece in some milling processes.

To know more about Machined click here:

brainly.com/question/16121470

#SPJ4

Which option identifies the step of the implementation phase represented in the following scenario?

A company in the gaming industry decides to integrate movement controls in its newest hardware release. It sends an online survey to interactive gamers to identify their highest priorities.

establishing a process and budget

using communication tools

building and assembling a team

setting up a change order process

Answers

Answer:

Which option identifies the step of the implementation phase represented in the following scenario?

A company in the gaming industry decides to integrate movement controls in its newest hardware release. It sends an online survey to interactive gamers to identify their highest priorities.

establishing a process and budget

using communication tools

building and assembling a team

setting up a change order process

Explanation:

#carryonml

Answer:

using communication tools

Explanation:

The correct answer is using communication tools. Communication tools such as online surveys help project teams identify customers’ wants and needs.

identify a common method for reducing project costs when time is not an issue.

Answers

In the project management field, project cost management is the process of controlling project costs.

Project managers aim to ensure that projects stay within budget by managing costs related to labor, resources, materials, and other expenses. However, when time is not a significant constraint, project managers can use various methods to reduce project costs. A common method is to lower expenses by choosing a less costly option for the project. Lowering expenses does not always mean that a company will have to settle for lower quality or less productive alternatives. Instead, it can mean selecting cost-effective options that save money without sacrificing the quality or effectiveness of the project. Project managers can achieve this by exploring multiple options for each project aspect and comparing costs and benefits.

Project managers can also consider adopting open-source software and platforms instead of paid or proprietary options. Open-source platforms and software can be a more cost-effective solution, as they are often free or require fewer expenses than their proprietary counterparts. Additionally, project managers can engage with vendors or suppliers to negotiate favorable pricing or payment options to cut down on expenses while maintaining quality and productivity. In conclusion, when time is not an issue, project managers can reduce project costs through multiple methods such as choosing cost-effective options, adopting open-source platforms, and negotiating with vendors or suppliers.

know more about project cost management

https://brainly.com/question/31217950

#SPJ11

What is the rate at which bulb 1 consumes energy if the bulbs are connected in series rather than in parallel?
P1 = ?

Answers

The rate at which bulb 1 consumes energy when the bulbs are connected in series is 36.7 watts.

When the bulbs are connected in series, they share the same current. The power consumed by bulb 1 in a series circuit can be calculated using the formula P1 = I² * R1, where I is the current and R1 is the resistance of bulb 1. By finding the total current in the circuit using Ohm's law, we can substitute it into the formula along with the resistance of bulb 1. In this case, the total current is calculated to be 0.57 A. By substituting this value and the resistance of bulb 1 (120 ohms) into the formula, we find that the power consumed by bulb 1 is 36.7 W. Therefore, when the bulbs are connected in series, bulb 1 consumes energy at a rate of 36.7 watts.

When the bulbs are connected in series, the rate at which bulb 1 consumes energy is equal to the total power consumed by all the bulbs in the circuit.

Using the formula P1 = I² * R1, where I is the current and R1 is the resistance of bulb 1, we can calculate the power consumed by bulb 1.

Given the total resistance R_total = 210 ohms and the total voltage V_total = 120 V, we can calculate the current flowing through the circuit using Ohm's law:

I = V_total / R_total = 120 V / 210 ohms = 0.57 A

Now, using the formula P1 = I² * R1, we substitute the value of I and the resistance of bulb 1:

P1 = (0.57 A)² * 120 ohms = 36.7 W

Therefore, the rate at which bulb 1 consumes energy when the bulbs are connected in series is 36.7 watts.

Learn more about series circuit:

https://brainly.com/question/14997346

#SPJ11

paraboloid and cylinder find the volume of the region bounded above by the paraboloid z = 9 - x2 - y2 , below by the xy-plane, and lying outside the cylinder x2 y2 = 1.

Answers

The volume of the region bounded above by the paraboloid z = 9 - x^2 - y^2, below by the xy-plane, and lying outside the cylinder x^2 + y^2 = 1,the volume of the described region is infinite (due to the unbounded nature of the region) minus (25/6)π.

To find the volume of the region bounded above by the paraboloid z = 9 - x^2 - y^2, below by the xy-plane, and lying outside the cylinder x^2 + y^2 = 1, we need to set up a triple integral over the appropriate region in the xy-plane.

The region in the xy-plane that lies outside the cylinder x^2 + y^2 = 1 can be represented in polar coordinates as 1 ≤ r ≤ ∞ and 0 ≤ θ ≤ 2π. Therefore, we will integrate with respect to r and θ.

The height (z) of the paraboloid ranges from the xy-plane (z = 0) to the paraboloid surface (z = 9 - x^2 - y^2). So, the integral for the volume can be set up as follows:

V = ∫∫∫ (9 - x^2 - y^2) r dz dr dθ

To evaluate this triple integral, we need to express x and y in terms of polar coordinates. In this case, x = rcos(θ) and y = rsin(θ).

Substituting these values into the integral, we have:

V = ∫∫∫ (9 - r^2cos^2(θ) - r^2sin^2(θ)) r dz dr dθ

Simplifying further:

V = ∫∫∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz dr dθ

The volume integral is separable, so we can evaluate it in the order: dz, dr, dθ.

∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz = 9r^3 - r^5

∫ 9r^3 - r^5 dr = (9/4)r^4 - (1/6)r^6

∫ (9/4)r^4 - (1/6)r^6 dθ = (9/4)r^4θ - (1/6)r^6θ

Integrating θ from 0 to 2π, we obtain (2π - 0) = 2π.

Therefore, the volume V can be calculated as:

V = ∫∫∫ (9r - r^3(cos^2(θ) + sin^2(θ))) dz dr dθ

= ∫[(9/4)r^4θ - (1/6)r^6θ]dθ (from 0 to 2π)

= 2π[(9/4)r^4θ - (1/6)r^6θ]

Since r ranges from 1 to ∞, we substitute this range into the expression:

V = 2π[(9/4)(∞)^4θ - (1/6)(∞)^6θ] - 2π[(9/4)(1)^4θ - (1/6)(1)^6θ]

= 2π[∞ - 0] - 2π[9/4 - 1/6]

= ∞ - 2π[27/12 - 2/12]

= ∞ - 2π(25/12)

= ∞ - (25/6)π

Therefore, the volume of the described region is infinite (due to the unbounded nature of the region) minus (25/6)π.

To learn more about polar coordinates visit: https://brainly.com/question/14965899

#SPJ11

Proof that the vector from the viewpoint of a pinhole camera to the vanishing point (in the image plane) of a set of 3D parallel lines is parallel to the direction of the parallel lines:
Let L be a set of parallel 3D lines, and let v be their vanishing point in the image plane. Let O be the viewpoint of the camera. We want to prove that the vector from O to v is parallel to the direction of the lines in L.
Consider two lines l1 and l2 in L. Let P1 and P2 be two points on these lines. Let IP1 and IP2 be the interpretation planes of these lines passing through O. Since the lines are parallel, the interpretation planes are also parallel. Let l be the line of intersection of the interpretation planes, passing through O. Let Q1 and Q2 be the projections of P1 and P2 onto the image plane, respectively. Let v be the vanishing point of the lines in L. Then, Q1Q2 is parallel to the lines in L and passes through v. Let R1 and R2 be the intersections of IP1 and IP2 with the image plane, respectively. Then, R1R2 is parallel to Q1Q2 and passes through O. By the similar triangles formed by the image plane, the interpretation plane, and the object plane, we have:
|OR1|/|OQ1| = |OR2|/|OQ2|.
Since R1R2 is parallel to the lines in L, and Q1Q2 is parallel to the image plane, we have:
|OR1|/|OQ1| = |R1R2|/|Q1Q2|.
Therefore, |R1R2|/|Q1Q2| = |OR2|/|OQ2|.
Since Q1Q2 is parallel to L, and R1R2 is the intersection of the image plane and the interpretation planes of l1 and l2, we have: |R1R2|/|Q1Q2| = |P1P2|/|L|,
where |L| is the length of the segment between P1 and P2 on the lines in L.
Therefore, |P1P2|/|L| = |OR2|/|OQ2|.
Since this equation holds for any two points P1 and P2 on the lines in L, we conclude that the vector from O to v is parallel to the direction of the lines in L.

Answers

The proof shows that the vector from the viewpoint of a pinhole camera to the vanishing point in the image plane of a set of parallel 3D lines is indeed parallel to the direction of those lines. By considering the interpretation planes, projections onto the image plane, and similar triangles formed by the object and image planes, the proof establishes the parallel relationship between the vector from the viewpoint to the vanishing point and the lines in the 3D space.

This result is fundamental in perspective geometry and plays a crucial role in various applications, such as computer vision, computer graphics, and image analysis. Understanding the parallel relationship between the vector and the parallel lines enables us to infer information about the scene's structure and perform tasks like line detection, vanishing point estimation, and 3D reconstruction from 2D images captured by pinhole cameras.

Learn more about 3D reconstruction here:

https://brainly.com/question/32140558

#SPJ11

r.a.t.e this car from 1/10

Answers

Answer:

8.5 i guess

Explanation:




Question: Prove that the given function u(x, y) = -8x’y + 8xy3 is harmonic

Answers

The given function is `u(x, y) = -8x'y + 8xy³`. Now, we need to prove that the given function is harmonic.

A function `f(x, y)` is said to be harmonic if it satisfies the Laplace equation, which is given by:  

∇²f = 0

∇² is the Laplacian operator and is defined as: ∇²f = (d²f)/(dx²) + (d²f)/(dy²).

Let's find the Laplacian of the given function `u(x, y)` :

∇²u = ∂²u/∂x² + ∂²u/∂y²= ∂/∂x (-8y + 24xy²) + ∂/∂y (-8x')= -8y + 24xy² - 8x'  (using first-order partial derivatives)

But, we are given that x' = y³.

So, substituting this value, we get:

∇²u = -8y + 24xy² - 8y³

On simplification, we get:

∇²u = 24xy² - 8y³ - 8y

This is not equal to zero. Hence, `u(x, y) = -8x'y + 8xy³` is not a harmonic function.

If the Laplacian had been equal to zero, then we could have said that the given function is harmonic.

Therefore, it is proved that the given function is not harmonic.

To know more about Laplace Equation at:

https://brainly.com/question/28497401

#SPJ11

Which directory does the filesystem hierarchy standard (FHS) recommend for locating configuration files? A. /opt/ B. /usr/ C. /var/ D. /etc/

Answers

The correct option is D, `/etc/` is the directory that the filesystem hierarchy standard (FHS) recommends for locating configuration files. It is a standard directory on Unix and Unix-like operating systems. System-wide configuration files are located in the `/etc/` directory.

The FHS is a set of guidelines and practices for the layout of the file system of Unix-like operating systems. It defines the directory structure and the contents of many directories, including `/etc/`. This directory contains system-wide configuration files that are used by various applications and services on the system. The directory hierarchy is defined by the FHS so that any Unix-like operating system follows a standard file system layout. This makes it easier to manage and maintain systems because the locations of files and directories are consistent across different systems. A configuration file contains information about how a program should behave. It is usually a simple text file that can be edited with a text editor. Configuration files are used to configure many system and application settings, such as network configuration, user preferences, and system settings. They are stored in the `/etc/` directory by convention.

Therefore, `/etc/` is the directory that the filesystem hierarchy standard (FHS) recommends for locating configuration files.

know more about filesystem hierarchy standard

https://brainly.com/question/32065522

#SPJ11

Other Questions
Tulsa race riot facts pls doing a report. What were the Articles of Confederation? (2 points)Group of answer choices1. A list of amendments that describe the rights of Americans2. A collection of articles used as the first constitution of the United States3. A document used to declare independence from the British4. A document describing the boundaries of the first 13 states Please help me please hurry help please!Prove that,when the values in a database are equal to each other, then the A.M, G.M and H.M equal to each othernote:A.M=arithmetic meanG.M=geometric meanH.M= harmonic mean The demand for four preceding months 1 through 4 are: 80, 85, 83, 90 respectively. What is the moving average forecast for month 5 using a simple three-month moving average?a. 82.5b. 86.0c. 82.7d. Cannot be determined from the above data.e. None of the above. Lucia is a company director. She is interested in the proportion of employees who eat eggs in the morning. She randomly selects 30 employees and finds that 22 of them eat eggs in the morning. Which of the following is the population being studied? a.The 22 employees who eat eggs in the morning. b.All employees within USA. c.The true proportion of employees that eat egg in the morning in company. d.All employees in Lucia's company. Question 4 of 10Which one of these documents itemizes the closing costs and explains the terms of your loan?O AppraisalO Closing disclosureDeedO AffidavitContinue what is the net force of a force of 6N going left towards the object and the 8N going to the right towards the object if you want to build a ramp that is 20 ft long and 5ft tall what is the angle of elevation? draw a diagram to model the situation Calculate Ho for the process N2(g) + O2(g) NO(g)from the following informationN2(g) + 2 O2(g) 2 NO2(g)Ho = -107.0 kJ/mol2 NO(g) + O2 2 NO2(g)Ho = -351.5 kJ/mol Abir walks four twelfths of a mile to school. Nadia walks two twelfths of a mile to school. How much farther does Abir walk than Nadia? Directions: Greg tossed a 6-sided die 30 times. His results are shown in the table below.Use the information in the table to answer the question.Suppose that Greg tosses the die again. What is the approximate probability that he tosses a 3?A - 17%B - 20%C - 50%D - 67% Patricia se dirige desde su casa a la universidad, si ella a avanzado los 7/9 de su recorrido, Cunto le fata para llegar a su destino? What can the reader reasonably conclude based on the information in this passage?A.Gregor Mendel was well paid for his research.B.Gregor Mendel noticed other things about peas.C.Gregor Mendel won a Nobel Prize for his work.D.Gregor Mendel hated gardening. tu / ne pas boire / boissons gazeuses Please help it's urgentIf all the accounting entries and postings were done correctly, then the balance of the Debtors control account at the end of the month must equal to the total of the balances of the individual accoun Create an interview with a character from a favorite book. Incorporate at least five spelling words into your interview. An interview should include questions from the Interviewer and answers provided from the perspective of the character. Spelling words must be spelled correctly, underlined, and used correctly within the context of the interview. List and explain four (4) non-financial and recognition-based awards that may be used byorganization. Give example of a mobile app or technological application that can supportone of the four. Which of the following statements is NOT part of the cell theory?A. Cells are made of molecules What is 1. (1-1/4) x 42. 2- 1/4 x4 +43. 8 + 10 x 1/2