for a particular reaction at 170.2170.2 °c, δ=−977.58 kj/molδg=−977.58 kj/mol , and δ=228.69 j/(mol⋅k)δs=228.69 j/(mol⋅k) . calculate δg for this reaction at −3.7−3.7 °c.

The volume of 1.20 x 10²² molecules of nitric oxide gas, NO, at STP is 0.447 L (Option B).

To find the volume, follow these steps:

1. Convert the number of molecules to moles using Avogadro's number (6.022 x 10²³ molecules/mol): (1.20 x 10²² molecules) / (6.022 x 10²³ molecules/mol) = 0.0199 mol
2. Use the molar volume of a gas at STP (22.4 L/mol) to find the volume: (0.0199 mol) x (22.4 L/mol) = 0.447 L

In summary, first, convert the given number of molecules to moles using Avogadro's number. Then, use the molar volume of a gas at STP to calculate the volume of the gas.

To know more about Avogadro's number  click on below link:

https://brainly.com/question/28812626#

#SPJ11

The statement "Sodium hydroxide can cause severe damage to skin and eyes" is true. Sodium hydroxide is a highly corrosive substance and can cause burns, irritation, and damage when it comes into contact with the skin or eyes.

Sodium hydroxide is a highly caustic compound that can cause significant damage to the skin and eyes upon contact. The severity of the damage depends on the concentration of the sodium hydroxide solution, the duration of exposure, and the amount of skin or eye tissue affected. Sodium hydroxide reacts with the fats and oils in the skin and eyes, leading to the formation of soap-like substances called "salts of fatty acids." These salts can cause significant tissue damage, leading to pain, redness, swelling, and blistering.

Learn more about Sodium hydroxide: https://brainly.com/question/30460434

#SPJ11

pKR = 13, pKa1 = 2.21, pKa2 = 9.15. if the pH of the solution is higher than the amino acid's pKa value. A serine solution has a pH of 8.9, making it alkaline, and the amine group is 33% protonated, giving it a pKa of 9.2.

Each functional group on the amino acid is protonated at a pH lower than its pKa value.The functional group is 50% protonated and 50% protonated if the pH and pKa are equal. Locate the volume on the graphs that is halfway between the two equivalence point volumes that were derived using the expanded derivative curves in order to determine pKa1 and pKa2.

To know more about alkaline, click here:

https://brainly.com/question/31463506

#SPJ4

7. Given the following pK's what is the principal form of serine at pH 5?

pKa1 = 2.21 pKa2 = 9.15 pKR = 13

Based on the options provided, the closest answer is 4.07. However, the accurately calculated pH is approximately 4.82.

To determine the pH of the solution containing 0.21 M C3H7COOH (Ka = 1.5 x 10^-5) and 0.25 M HClO (Ka = 2.9 x 10^-8), follow these steps:
1. Identify the dominant acid: C3H7COOH has a higher Ka value (1.5 x 10^-5) than HClO (2.9 x 10^-8), so it is the dominant acid in the solution.
2. Use the Henderson-Hasselbalch equation to find the pH: pH = pKa + log([A-]/[HA]). For C3H7COOH, pKa = -log(1.5 x 10^-5) ≈ 4.82.
3. Since there is no conjugate base present, we can assume that [A-] is negligible compared to [HA]. So, the pH is approximately equal to the pKa of the dominant acid, which is 4.82.

Learn more about pH here: brainly.com/question/15289741

#SPJ11

The value of δh for the given reaction is -91.7 kJ.

To calculate δh for the given reaction, we need to use Hess's law. First, we reverse the given reaction and change its sign, which gives us: [tex]NO2(g) → NO(g) + O(g) and δh = 91.7 kJ.[/tex]

Next, we use the given reactions to manipulate them to obtain the desired reaction:

Multiply the first reaction by 2 to obtain[tex]2NO(g) + 2O3(g) → 2NO2(g) + 2O2(g) and δh = -397.8 kJ[/tex]

Multiply the second reaction by 2 and reverse it to obtain [tex]3O2(g) → 2O3(g) and δh = 284.6 kJ[/tex]

Add the above two reactions to obtain: [tex]2NO(g) + 3O2(g) → 2NO2(g) + 2O(g) and δh = -113.2 kJ[/tex]

Finally, we cancel out O(g) from the desired reaction and add the remaining reactions to obtain the desired reaction, which gives us: [tex]NO(g) + O(g) → NO2(g) and δh = -91.7 kJ.[/tex]

Learn more about reactions here:

https://brainly.com/question/28984750

#SPJ11

This reaction is often carried out in the presence of a strong acid, such as H2SO4, to facilitate the protonation of the alcohol. To accomplish each of the given transformations, you would use the following reagents:

1. Na2Cr2O7 and H2SO4: These reagents are commonly used in the oxidation of alcohols to aldehydes or ketones. Specifically, Na2Cr2O7 is a strong oxidizing agent that can convert primary alcohols to aldehydes and secondary alcohols to ketones. However, in order to achieve this transformation, the reaction must be carried out in the presence of an acid catalyst, such as H2SO4.

2. Br2 and H2O: These reagents are used in the addition of halogens to alkenes. Specifically, Br2 is a halogen that can be added to an alkene to form a dihalide. This reaction is often carried out in the presence of water (H2O) to help solubilize the reagents and facilitate the reaction.

3. [H3O+]: This reagent is commonly used in acid-catalyzed reactions, such as the dehydration of alcohols. Specifically, [H3O+] can protonate the hydroxyl group of an alcohol to form an oxonium ion, which can then undergo elimination to form an alkene.

Learn more about transformations here:

https://brainly.com/question/13801312

#SPJ11

The answers to the statements on the trapping of glucose after phosphorylation in the cell are: TRUE, TRUE, FALSE, FALSE

1. It's no longer a substrate for the glucose transporter.
- This statement is TRUE. The phosphorylated glucose is no longer recognized by the glucose transporter, preventing it from leaving the cell.

2. The phosphate group makes the molecule bigger.
- This statement is TRUE. The addition of the phosphate group increases the size of the glucose molecule.

3. The phosphate group gives glucose a +2 charge.
- This statement is FALSE. The phosphate group imparts a negative charge on the glucose molecule, not a positive charge.

4. Changes in size and charge make it easier for phosphorylated glucose to diffuse across the membrane.
- This statement is FALSE. The changes in size and charge make it more difficult for glucose after phosphorylation to diffuse across the membrane, trapping it within the cell.

To learn more about the importance of phosphorylation of glucose visit: https://brainly.com/question/7002841

#SPJ11

The extraction by both acid and base is necessary to arrive at highly purified benzoic acid because it ensures the efficient separation and removal of impurities, while maintaining the desired compound's integrity.

In the extraction process, the acid/base treatment helps to separate benzoic acid from other organic compounds. Initially, an acidic solution is used to convert the benzoic acid into its soluble salt form, which can then be extracted with an organic solvent.

Next, a base is added to the organic layer to neutralize the acid, and the benzoic acid returns to its insoluble, carboxylic form, precipitating out of the solution.

By using both acid and base treatments, the extraction process can effectively isolate and purify the benzoic acid by manipulating its solubility and reactivity. This two-step approach ensures that impurities are removed and the desired compound remains intact throughout the process, resulting in a high-purity final product.

To know more about solubility click on below link:

https://brainly.com/question/28170449#

#SPJ11

1. When 1-pentyne reacts with H2SO4, H2O, HgSO4, the product is 2-pentanone, an enol that tautomerizes to a ketone.

2. When 1-pentyne reacts with one equivalent of HCl, the product is 1-chloro-1-pentene, formed via Markovnikov addition. 3. When 1-pentyne reacts with two equivalents of Br2 in CCl4, the product is 1,1,2,2-tetrabromopentane, where Br2 adds across the triple bond twice.

4. When 1-pentyne reacts with NaNH2 in NH3 followed by MeI, the product is 1-pentyl methyl ether, an S_N2 reaction where the terminal alkyne is converted into an alkoxide and then substituted by MeI.
5. When 1-pentyne reacts with H2, Pt, the product is pentane, where the triple bond is reduced to a single bond via hydrogenation.

To know more about methyl click here

brainly.com/question/30614192

#SPJ11

Increasing the concentration of iodomethane will increase the reaction rate of the reaction between [tex](CH_3)_3CO^-[/tex] and iodomethane.

The reaction between [tex](CH_3)_3CO^-[/tex] and iodomethane is a nucleophilic substitution reaction. In this reaction, [tex](CH_3)_3CO^-[/tex] acts as a nucleophile, attacking the carbon atom of [tex]CH_3I[/tex] to form [tex](CH_3)_3COCH_3[/tex] (tert-butyl methyl ether) and iodide ion ([tex]I^-[/tex]).

When the concentration of iodomethane is increased, the reaction rate will increase due to the increase in the number of iodomethane molecules available to react with [tex](CH_3)_3CO^-[/tex]. This is because the rate of a nucleophilic substitution reaction is dependent on the concentration of the nucleophile and the concentration of the substrate.

Therefore, an increase in the concentration of iodomethane will lead to an increase in the rate of the reaction.

Learn more about nucleophilic substitution reaction here: https://brainly.com/question/30631335

#SPJ11

The reaction rate also depends on the stability of the carbocation and it is a weaker base.

What is reaction ?

The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds. The transformation of one or more reactants into one or more new products is referred to as a chemical reaction. Substances are made of chemical constituents or compounds.

What is energy?

The definition of energy is "capacity to do work, which is ability to apply force causing displacement of an object." Energy is just the force that moves objects, despite this definition's seeming complexity.

The silver nitrate in ethanol test examines the compound’s reactivity through  pathways. In reactions, the rate strictly depends only on the quality of the leaving group. This reaction takes place through a formation carbocation intermediate. So, the reaction rate also depends on the stability of the carbocation.

Therefore, the reaction rate also depends on the stability of the carbocation and it is a weaker base.

Learn more about reaction from the given link.

https://brainly.com/question/11231920

#SPJ1

Once you've calculated the degrees of freedom (k) using the conservative method, you can input the necessary values into the tcdf function on your calculator to obtain the desired result. the degrees of freedom (k) using the conservative method, you'll need the sample sizes of the groups you're comparing. For instance, let's say you have two groups, Group A with a sample size of n1 and Group B with a sample size of n2.

To calculate the degrees of freedom, k, using the conservative method, you need to subtract 1 from the total number of observations. For example, if you have a sample size of 20, your degrees of freedom would be 19.

Once you have determined the degrees of freedom, you can use the tcdf function on your calculator to find the probability of obtaining a t-statistic within a certain range. The tcdf function requires three inputs: the t-statistic, the degrees of freedom, and the direction of the interval (either "less than", "greater than", or "between").

For example, if you wanted to find the probability of obtaining a t-statistic less than -2.5 with 19 degrees of freedom, you would enter "tcdf(-999,-2.5,19)" into your calculator (the "-999" represents negative infinity). This would give you the probability of obtaining a t-statistic less than -2.5 with 19 degrees of freedom using the conservative method.

Learn more about conservative here:

https://brainly.com/question/10081071

#SPJ11

The pH of the solution is approximately 2.23. Answer: (b) 2.6

The first step is to calculate the concentration of benzoic acid in the solution:

moles of benzoic acid = mass / molar mass = 0.35 g / 122. g/mol = 0.00287 mol

concentration of benzoic acid = moles / volume = 0.00287 mol / 1000 mL = 0.00287 M

Now we can use the ionization constant of benzoic acid to calculate the pH:

Ka = [H+][C7H5O2-] / [C7H6O2]

Since benzoic acid is a weak acid, we can assume that [H+] is much smaller than [C7H5O2-]. Therefore, we can simplify the equation to:

Ka = [H+] [C7H5O2-] / [C7H6O2] ≈ [H+] [C7H5O2-] / [C7H5O2-]

Taking the square root of both sides, we get:

[H+] ≈ sqrt(Ka * [C7H5O2-]) = sqrt(6.5 × 10^5 * 0.00287) = 0.059 M

pH = -log[H+] = -log(0.059) ≈ 2.23

Therefore, the pH of the solution is approximately 2.23. Answer: (b) 2.6

Learn more about benzoic acid

brainly.com/question/24052816

#SPJ11

There are 0 geometric isomers exist for [Pt(en)₂].

There are no geometric isomers for [Pt(en)₂ ]. This is because the chemical structure of this compound involves a planar arrangement of ligands, which are ethylenediamine molecules that are symmetrically attached to the central platinum atom.

As such, there is no way to rotate the ligands around the central atom to create a different arrangement. Therefore, the answer to this question is 0.

Geometric isomers are compounds that have the same chemical formula but different arrangements of atoms in three-dimensional space. This is due to the fact that the atoms of the compound can be rotated around a single bond.

Know more about geometric isomers here

https://brainly.com/question/13422357#

#SPJ11

The volume of a 0.161 M barium hydroxide solution required to neutralize 29.9 mL of a 0.324 M perchloric acid solution, titration is done, in which equivalence point is to be noted. Equivalence point refers to a certain point in a titration where the number of equivalents of the analyte and titrants are equal. Once the equivalency point is reached, the titrant and the analyte are both completely consumed.

To find the required volume, we use the formula:
acid concentration x acid volume = base concentration x base volume

acid volume = 29.9 mL = 0.0299 L
0.324 M x 0.0299 L = base concentration x base volume
For base concentration:
base concentration = (0.324 M x 0.0299 L) / base volume
base concentration = 0.0096696 / base volume

Now we need to find the volume of the barium hydroxide solution that will neutralize the perchloric acid. Since barium hydroxide is a strong base, it will react with the perchloric acid to form barium perchlorate and water:

Ba(OH)2 + 2HClO4 → Ba(ClO4)2 + 2H2O

From the balanced equation, we can see that one mole of barium hydroxide reacts with two moles of perchloric acid. We can use this information to find the moles of acid in the given solution:

moles of acid = concentration x volume = 0.324 M x 0.0299 L = 0.0096696 mol
Since two moles of acid react with one mole of base, we need half as many moles of base:
moles of base = 0.0096696 mol / 2 = 0.0048348 mol

0.161 M x base volume = 0.0048348 mol
base volume = 0.0048348 mol / 0.161 M
base volume = 0.0300 L = 30.0mL

Therefore, we need 30.0 mL of the 0.161 M barium hydroxide solution to neutralize 29.9 mL of the 0.324 M perchloric acid solution.

For more questions on barium hydroxide: https://brainly.com/question/30900569

#SPJ11

Pyrrole has the structure:
   H
   |
H---C---NH
   |
   H

This compound is classified as aromatic because it contains a planar, cyclic, conjugated pi-network of electrons.

The two Kekule Structures of benzene are:

   H     H       H     H
   |     |       |     |
H---C===C---H   H---C---C---H
   |     |       |     |
   H     H       H     H

Pyrrole is an aromatic compound with the molecular formula C4H5N. Its structure consists of a five-membered ring containing four carbon atoms and one nitrogen atom, with each atom contributing one electron to the pi-network. The structure of pyrrole can be drawn as follows:

```
    H
     \
      C---C
    //     \\
   N       C
    \\      \
      C------C
       \
        H
```

The double bonds in the ring create a continuous overlap of p-orbitals, forming a planar pi-network. Pyrrole satisfies Hückel's rule, which states that an aromatic compound must have (4n + 2) pi electrons, where n is a non-negative integer (in this case, n=1). Since pyrrole has 6 pi electrons in its pi-network, it is classified as an aromatic compound.

Regarding the two Kekulé structures of benzene, they can be represented as:

```
Structure 1:     Structure 2:

  C-----C           C-----C
 /       \         /       \
C         C       C         C
 \       /         \       /
  C-----C           C-----C
   \   /             \   /
    C=C               C=C
```

In both structures, benzene has a six-membered ring with alternating single and double bonds. These Kekulé structures represent the resonance of the pi-electron system in the aromatic benzene ring.

Learn more about pyrrole at: brainly.com/question/14565841

#SPJ11

In the off-resonance decoupled 13C NMR spectrum of 1-chloropropadiene, a singlet and two doublets are observed.

The singlet corresponds to the carbon atom bonded to the chlorine atom, while the two doublets correspond to the two carbon atoms in the propadiene chain.

The two doublets have different coupling constants due to the different neighboring carbon atoms.

One of the doublets is a triplet due to the coupling with the adjacent carbon atom, while the other doublet is a doublet due to the coupling with the more distant carbon atom.

This pattern of signals is consistent with the molecular structure of 1-chloropropadiene.

learn more about singlet here:brainly.com/question/31046485

#SPJ11

The molecules produced in the complete combustion of every hydrocarbon fuel are c.carbon dioxide and d. water.

In a complete combustion reaction, hydrocarbon fuels react with oxygen to form these products. The process involves the breaking of chemical bonds in the hydrocarbon molecules and oxygen, followed by the formation of new chemical bonds to produce carbon dioxide and water. This type of reaction releases a significant amount of energy in the form of heat and light, which is utilized in various applications such as heating, transportation, and electricity generation.

It is essential to maintain an adequate supply of oxygen to ensure complete combustion and prevent the formation of unwanted by-products such as carbon monoxide or soot. In summary, complete combustion of hydrocarbon fuels results in the production of carbon dioxide and water, while oxygen is consumed during the reaction. So the correct answer are c.carbon dioxide and d. water.

Learn more about combustion reaction at:

https://brainly.com/question/10458605

#SPJ11

To determine if the energy exceeds the MIE (Minimum Ignition Energy) for dusts, we also need to know the MIE value of the carbon black being used.

To calculate the charge developed on the vessel being filled with carbon black, we need to know the electrical conductivity of carbon black. However, assuming a typical range of electrical conductivity for carbon black, we can estimate the charge developed using the following formula:

Charge = Current × Time

For the pouring method, assuming a typical transfer rate of 0.5 m/s for pouring and a bulk density of 300 kg/m3 for carbon black, we can calculate the current as follows:

Current = Charge / Time = (Capacitance × Voltage) ÷ Time

Current = (ε × A / d) × (Vf − Vi) / t

where ε is the electrical permittivity of air, A is the surface area of the vessel, d is the distance between the vessel and the ground, Vf is the final voltage, Vi is the initial voltage, and t is the time taken to fill the vessel.

Assuming a typical value of ε = 8.85 × 10⁻¹² F/m, A = 4πr²(where r is the radius of the vessel), d = 0.1 m, Vf = 10 kV, and Vi = 0 V, we can estimate the charge developed for the pouring method as follows:

Charge = Current × Time = (ε × A  d) × (Vf − Vi) / t × t

Charge = ε × A / d × (Vf − Vi)

Charge = (8.85 × 10⁻¹² F/m) × (4π × (0.5 m)²) / 0.1 m × 10 kV

Charge = 8.84 × 10⁻⁶ C

For the pneumatic transport method, assuming a typical air velocity of 20 m/s and a bulk density of 500 kg/m³ for carbon black, we can calculate the current as follows:

Current = Charge / Time = (Capacitance × Voltage) / Time

Current = (ε × A / d) × (Vf − Vi) / t

where ε is the electrical permittivity of air, A is the surface area of the vessel, d is the distance between the vessel and the ground, Vf is the final voltage, Vi is the initial voltage, and t is the time taken to fill the vessel.

Assuming the same values as for the pouring method, we can estimate the charge developed for the pneumatic transport method as follows:

Charge = Current × Time = (ε × A / d) × (Vf − Vi) / t × t

Charge = ε × A / d × (Vf − Vi)

Charge = (8.85 × 10⁻¹² F/m) × (4π × (0.5 m)²) / 0.1 m × 10 kV

Charge = 8.84 × 10⁻⁶ C

The energy associated with the charge can be calculated using the following formula:

Energy = 1/2 × Capacitance × Voltage²

Assuming a capacitance of 0.1 pF (which is a typical value for a vessel of this size), the energy for both filling methods is:

Energy = 1/2 × Capacitance × Voltage²

Energy = 1/2 × (0.1 × 10⁻¹² F) × (10 kV)²

Energy = 5 × 10⁻⁶ J

This energy is relatively low and is unlikely to exceed the minimum ignition energy (MIE) for carbon black.

Learn more about ignition here:

https://brainly.com/question/30702691

#SPJ1

The ΔpH of the solution is -4.99, whereas the ΔpH of buffer 4a is -9x10⁻³. A buffer helps to minimize changes in pH, so the ΔpH of buffer 4a is much smaller than the ΔpH of the solution, indicating that buffer 4a effectively maintains its pH despite the addition of HCl. To determine the ΔpH when you add 1.0 mL of 0.4 M HCl to 40.0 mL of pure water, follow these steps:

Step:1. Calculate the moles of HCl added:
Moles of HCl = (Volume in L) × (Molarity)
Moles of HCl = (0.001 L) × (0.4 mol/L) = 0.0004 mol
Step:2. Calculate the total volume of the solution:
Total volume = 1.0 mL (HCl) + 40.0 mL (water) = 41.0 mL = 0.041 L
Step:3. Calculate the concentration of HCl in the solution:
[HCl] = (Moles of HCl) / (Total volume in L)
[HCl] = 0.0004 mol / 0.041 L = 0.009756 mol/L
Step:4. Calculate the pH of the solution:
pH = -log[HCl]
pH = -log(0.009756) ≈ 2.01
Step:5. Compare the ΔpH of the solution to the ΔpH of buffer 4a:
The initial pH of pure water is 7. Therefore, the ΔpH of the solution is:
ΔpH = final pH - initial pH = 2.01 - 7 = -4.99

Learn more about pH here, https://brainly.com/question/172153

#SPJ11

Correct option is A,  Pairing A (one calcium atom and one sulfur atom) would create an octet for each atom.

To determine which of these pairings would create an octet for each atom, we need to consider the number of valence electrons for each element involved. An octet is achieved when an atom has 8 valence electrons in its outer shell.

A. one calcium atom and one sulfur atom:
Calcium (Ca) has 2 valence electrons and Sulfur (S) has 6 valence electrons. When Calcium loses 2 electrons and Sulfur gains 2 electrons, both achieve an octet. This pairing works.

B. one lithium atom and one sulfur atom:
Lithium (Li) has 1 valence electron and Sulfur (S) has 6 valence electrons. Lithium can lose 1 electron, but Sulfur needs 2 more electrons to achieve an octet. This pairing doesn't work.

C. one strontium atom and one nitrogen atom:
Strontium (Sr) has 2 valence electrons and Nitrogen (N) has 5 valence electrons. Strontium can lose 2 electrons, but Nitrogen needs 3 more electrons to achieve an octet. This pairing doesn't work.

D. one aluminum atom and one oxygen atom:
Aluminum (Al) has 3 valence electrons and Oxygen (O) has 6 valence electrons. Aluminum can lose 3 electrons, and Oxygen can gain 2 electrons. However, the transfer of electrons doesn't lead to an octet for both atoms. This pairing doesn't work.

To know more about octet refer to

https://brainly.com/question/865531

For the first reaction, the cell notation is:

Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)

And for the  second, the cell notation is:

Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

For the first reaction, we need to identify the half-reactions and then write the cell notation accordingly.
Half-reactions:
Oxidation: Al(s) → Al3+(aq) + 3e-
Reduction: Cr3+(aq) + 3e- → Cr(s)
Overall reaction:
Al(s) + Cr3+(aq) → Al3+(aq) + Cr(s)
To write the cell notation, we need to put the oxidation half-reaction on the left and the reduction half-reaction on the right, separated by a double vertical line. The anode (where oxidation occurs) is on the left and the cathode (where reduction occurs) is on the right. The salt bridge is represented by a single vertical line. The standard cell potential (E°) is written in parentheses after the cathode half-reaction.
The cell notation for this reaction would be:
Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)
For the second reaction, we follow the same steps:
Half-reactions:
Oxidation: Cu(s) → Cu2+(aq) + 2e-
Reduction: SO2(g) + 2H2O(l) + 2e- → SO42-(aq) + 4H+(aq)
Overall reaction:
Cu(s) + SO2(g) + 2H2O(l) → Cu2+(aq) + SO42-(aq) + 4H+(aq)
The cell notation would be:
Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

Therefore, the cell notations are as follows

Al(s) | Al3+(aq) || Cr3+(aq) | Cr(s)

Cu(s) | Cu2+(aq) || SO2(g), H2O(l) | SO42-(aq), H+(aq)

for more such question on cell notation

https://brainly.com/question/15174933

#SPJ11

Answer:

H2SO4

Explanation:

In order to be diprotic it must have 2 hydrogen protons to donate.

Option A only has 1 so it will be eliminated.

H2CO3 is a weak acid, hoocch2cooh is a weak acid, and H2SO3 is a weak acid.

Therefore the only strong acid with 2 protons to donate is H2SO4.

H2SO4 has greater polarity due to the Sulfur atom compared to CO3 which has a carbon atom. This makes it a stronger acid.

Answer:

Complete combustion takes place in the presence of a sufficient amount of oxygen while an incomplete combustion reaction takes place when there is an insufficient amount of oxygen supply.

please make me brainalist and keep smiling dude

Using the given thermodynamic values, ΔG° at 298 K for this reaction is 168.3 kJ/mol. The reaction is Endothermic. The reaction is Endergonic.

a. To calculate ΔG° at 298 K for this reaction in kJ/mol, use the formula: ΔG° = ΔH° - TΔS°.

Convert ΔS° to kJ/mol K by dividing by 1000 (105.0 J/mol K / 1000 = 0.105 kJ/mol K).

Now plug in the values: ΔG° = 199.6 kJ/mol - (298 K × 0.105 kJ/mol K) = 199.6 kJ/mol - 31.29 kJ/mol = 168.3 kJ/mol.

b. Since ΔH° is positive (199.6 kJ/mol), the reaction is Endothermic.
c. Since ΔG° is positive (168.3 kJ/mol), the reaction is Endergonic.

Therefore, ΔG° at 298 K for this reaction is 168.3 kJ/mol, the reaction is Endothermic, the reaction is Endergonic.

Learn about endothermic reactions : https://brainly.com/question/6506846

#SPJ11

True. The synthesis of triphenylmethanol involves the reaction of bromobenzene and benzophenone, with benzophenone being the limiting reactant.

To ensure that both reagents react fully when we perform a reaction, it is difficult to measure the exact amounts of the two substances. Because of this, we often have a limiting reagent and an excess reagent.

The limiting reagent is the one that establishes the maximum amount of product that can be produced since once it is depleted, the reaction halts and cannot continue because the other reagent has nothing left to react with.

The balanced reaction equation is:
3 C₆H₅Br + 3 (C₆H₅)₂CO + AlCl₃ ⇒ (C₆H₅)₃COH + 3 HCl + AlBr₃

The first reactant in a reaction to entirely transform into products is known as the limiting reactant.

As opposed to the reagent in excess, which offers no useful information, the limiting reagent gives information about the amount of the product created.

Learn more about limiting reactant here

https://brainly.com/question/14225536

#SPJ11

moles of Hcl is present in 0.0355 l of a 0.200 m solution are 0.0071 moles.

To find the moles of HCl present in 0.0355 L of a 0.200 M solution, follow these steps:

1. Write down the given information:
  - Volume of the solution: 0.0355 L
  - Concentration (molarity) of the solution: 0.200 M

2. Use the formula: moles = molarity × volume
  - Moles of HCl = (0.200 mol/L) × (0.0355 L)

3. Calculate the moles of HCl:
  - Moles of HCl = 0.0071 mol

So, there are 0.0071 moles of HCl present in 0.0355 L of a 0.200 M solution.

Learn more about  moles of HCl at  brainly.com/question/16495198

#SPJ11

The pH after adding 7.06 mL of 0.1000 M HCl is the same as the initial pH: 11.87

The reaction between ammonia and hydrochloric acid is:

[tex]NH3(aq) + HCl(aq) - > NH4Cl(aq)[/tex]

Before any HCl is added, the solution contains only ammonia, so we can use the Kb expression to find the initial concentration of hydroxide ions:

[tex]Kb = [NH4+][OH-]/[NH3][/tex]

Since the initial concentration of[tex]NH4+[/tex] and [tex]OH-[/tex] is zero, we have:

[tex]Kb = [OH-]²/[NH3][/tex]

[tex][OH-][/tex] = √(Kb[[tex]NH3[/tex]]) =  √((1.8x10⁻⁵)(0.1000)) = 1.34x10⁻³ M

So the initial pH is:

pH = 14 - pOH = 14 - (-log[OH-]) = 11.87

After adding 7.06 ml of 0.1000 M HCl, the moles of HCl added is:

(0.1000 mol/L)(0.00706 L) = 7.06x10^-4 mol

The moles of [tex]NH3[/tex] initially present is:

(0.1000 mol/L)(0.02000 L) = 2.00x10⁻³  mol

The moles of [tex]NH3[/tex] remaining after the addition of HCl is:

2.00x10⁻³  mol - 7.06x10⁻⁴ mol = 1.29x10⁻³  mol

The volume of the solution is now 20.00 mL + 7.06 mL = 27.06 mL = 0.02706 L

The concentration of NH3 after the addition of HCl is:

[[tex]NH3[/tex]] = 1.29x10⁻³ mol/0.02706 L = 0.0476 M

The concentration of [tex]NH4+[/tex] is also 0.0476 M, since they are produced in a 1:1 ratio.

The reaction between [tex]NH3[/tex] and HCl is a strong acid-base reaction, so we can assume that all of the HCl is converted to [tex]H3O+[/tex].

The concentration of [tex]H3O+[/tex] is:

[[tex]H3O+[/tex]] = (7.06x10⁻⁴ mol)/(0.02706 L) = 0.0261 M

The equation for the ionization of [tex]NH4+[/tex] is:

[tex]NH4+ + H2O - > H3O+ + NH3[/tex]

The equilibrium constant for this reaction is:

[tex]Ka = [H3O+][NH3]/[NH4+][/tex]

Since the initial concentration of [tex]NH4+[/tex] is equal to the concentration of [tex]NH3[/tex] after the addition of HCl, we can substitute [[tex]NH4+[/tex]] = 0.0476 M into the equation above, and solve for [[tex]NH3[/tex]]:

[tex]Ka = [H3O+][NH3]/0.0476[/tex]

[[tex]NH3[/tex]] = (Ka)(0.0476)/[[tex]H3O+[/tex]] = (1.8x10⁻⁵ )(0.0476)/0.0261 = 3.28x10⁻⁵  M

The total concentration of [tex]NH3[/tex] is:

[[tex]NH3[/tex]]total = [[tex]NH3[/tex]] before addition + [[tex]NH3[/tex]] produced from [tex]NH4+[/tex] ionization

[[tex]NH3[/tex]]total = 0.1000 M + 3.28x10⁻⁵ M = 0.1000 M (to three significant figures)

Therefore, the pH after adding 7.06 mL of 0.1000 M HCl is the same as the initial pH:

pH = 11.87

Learn more about initial pH

brainly.com/question/30140546

#SPJ11

In the titration of 25.0 ml of 0.120 M pyridine, C5H5N(aq), with 0.120 M HBr(aq), the goal is to determine the pH at each stage of the titration. Pyridine is a weak base, and HBr is a strong acid,

so the reaction will proceed in the direction of the weaker base. The equilibrium constant for the ionization of pyridine, known as the base dissociation constant (Kb), is 1.7x10^-9.

At the start of the titration, the pyridine will be in its basic form, and the pH can be calculated using the Kb expression. As HBr is added, the concentration of the basic form of pyridine will decrease until it is completely neutralized. At the equivalence point, the pH will be determined by the concentration of the resulting salt. After the equivalence point, the excess HBr will make the solution acidic.

To calculate the pH at each stage, we need to determine the number of moles of HBr added to the solution at each stage, and use this to calculate the concentration of the resulting species using stoichiometry. Then we can use the Kb or Kw expression, depending on the stage of the titration, to calculate the pH.

Overall, the pH will start off basic, gradually decrease as HBr is added, reach a minimum at the equivalence point, and become increasingly acidic after that. The exact values will depend on the specific volumes and concentrations used in the titration.

Learn more about   Pyridine  here:

https://brainly.com/question/16241363

#SPJ11

A) 6.19 mL of 0.268 M perchloric acid solution is required to neutralize 12.9 mL of 0.128 M calcium hydroxide solution.

B) 31.7 mL of 0.182 M potassium hydroxide solution is required to neutralize 25.4 mL of 0.228 M perchloric acid solution.

A) To solve this problem, we need to use the balanced chemical equation for the reaction between perchloric acid and calcium hydroxide, which is:

HClO₄ + Ca(OH)₂ → Ca(ClO4)₂ + 2H₂O

From the equation, we can see that one mole of perchloric acid reacts with one mole of calcium hydroxide. Therefore, we can use the following formula to calculate the volume of perchloric acid solution required:

Molarity of perchloric acid x Volume of perchloric acid solution = Molarity of calcium hydroxide x Volume of calcium hydroxide solution

Plugging in the values given in the problem, we get:

0.268 M x Volume of perchloric acid solution = 0.128 M x 12.9 mL

Solving for Volume of perchloric acid solution, we get:

Volume of perchloric acid solution = (0.128 M x 12.9 mL) / 0.268 M = 6.19 mL

B) Similar to part A, we need to use the balanced chemical equation for the reaction between potassium hydroxide and perchloric acid, which is:

KOH + HClO₄ → KClO₄ + H₂O

From the equation, we can see that one mole of potassium hydroxide reacts with one mole of perchloric acid. Therefore, we can use the following formula to calculate the volume of potassium hydroxide solution required:

Molarity of potassium hydroxide x Volume of potassium hydroxide solution = Molarity of perchloric acid x Volume of perchloric acid solution

Plugging in the values given in the problem, we get:

0.182 M x Volume of potassium hydroxide solution = 0.228 M x 25.4 mL

Solving for Volume of potassium hydroxide solution, we get:

Volume of potassium hydroxide solution = (0.228 M x 25.4 mL) / 0.182 M = 31.7 mL

Learn more about volume: https://brainly.com/question/1578538

#SPJ11