The pH of C20H24O2N2, a diprotic base with a concentration of 0.00162 M, is approximately 10.11.
C20H24O2N2 is a diprotic base, meaning it can accept two protons (H+) per molecule. It has a concentration of 0.00162 M, and two dissociation constants, Kb1 and Kb2, which represent the extent of its ionization in water.[tex]Kb1 is 1.0x10-6 and Kb2 is 1.6x10-10[/tex]. These values indicate the strength of the base, with Kb1 being larger than Kb2.
To find the pH, we need to calculate the concentration of hydroxide ions (OH-) produced by the base when it ionizes. Since it is a diprotic base, it will ionize in two steps. The first step will generate OH- ions according to Kb1, and the second step according to Kb2.
Using the concentration of the base and the dissociation constants, we can calculate the concentration of OH- ions in each step. The pOH for the first step is given by[tex]pOH1 = -log(Kb1)[/tex], and the pOH for the second step is given by pOH2 = -log(Kb2).
The total pH is the sum of pOH1 and pOH2. To convert pOH to pH, we subtract the pOH from 14 (since pH + pOH = 14). Finally, rounding to two significant figures, we get a pH of approximately 10.11.
Learn more about diprotic base here:
https://brainly.com/question/30046193
#SPJ11
Calculate the ph of a 0.369 m solution of carbonic acid, for which the ka1 value is 4.50 x 10^-7.
The pH of a 0.369 M solution of carbonic acid (H₂CO₃) with a Ka1 value of 4.50 x 10⁻⁷ is 1.86.
To calculate the pH of the solution, follow these steps:
1. Write the dissociation equation for carbonic acid: H₂CO₃ ⇌ H+ + HCO3⁻
2. Write the Ka1 expression: Ka1 = [H+][HCO3⁻] / [H₂CO₃]
3. Since the solution initially contains 0.369 M H₂CO₃, let x represent the concentration of H⁺ ions formed. Then, the concentrations of HCO₃⁻ and H₂CO₃at equilibrium will be x and (0.369-x), respectively.
4. Substitute the values into the Ka1 expression: 4.50 x 10⁻⁷ = (x)(x) / (0.369 - x)
5. Solve the equation for x (using a quadratic formula or simplifying by assuming x << 0.369). x ≈ 6.97 x 10⁻³
6. Calculate the pH using the formula pH = -log[H+]. pH = -log(6.97 x 10⁻³) ≈ 1.86
To know more about quadratic formula click on below link:
https://brainly.com/question/9300679#
#SPJ11
Identify the reagents you would use to convert d-erythrose into d-ribose. What other product is also formed in this process?
To convert d-erythrose into d-ribose the reagent is Nitromethane, Sodium borohydride, Sodium periodate, Sodium periodate. The other product formed in this process is 3-amino-2,3-dideoxyketose.
To convert d-erythrose into d-ribose, the reagents required are:
Nitromethane: It reacts with d-erythrose to form a nitroaldol product.
Sodium borohydride: This reduces the nitro group to an amino group.
Sodium periodate: This selectively oxidizes the vicinal diol in the aminoaldose product to form the corresponding dialdehyde.
The reaction pathway can be represented as follows:
d-erythrose -> Nitromethane (in the presence of a base) -> Nitroaldol product -> Sodium borohydride -> Aminoaldose product -> Sodium periodate -> Dialdehyde -> d-ribose.
learn more about Nitromethane here:
https://brainly.com/question/19578949
#SPJ11
A lysine residue and a phenylalanine residue are located close to each other in a protein structure- protein phenylalanine R= nas ΗN. H mm. protein R lysine R = H₂N Describe how you would expect them to be oriented for the most favorable interaction. a) Select the most favorable interaction(s) of a lysine and phenylalanine residue. pi-cation interaction edge-to-face interaction b) If two phenylalanine residuo each other, select the most favo pi-cation interaction edge-to-face interaction I offset stacking I offset stacking
A lysine residue and a phenylalanine residue are located close to each other in a protein structure, we would expect them to be oriented in a way that would allow for the most favorable interaction.
The most favorable interactions between a lysine and phenylalanine residue would be either a pi-cation interaction or an edge-to-face interaction.
In the case of a pi-cation interaction, the positive charge of the lysine residue's amino group interacts with the negative charge of the phenylalanine's pi electrons. This interaction is strongest when the two residues are oriented with the lysine's amino group facing the pi electrons of the phenylalanine.
In the case of an edge-to-face interaction, the flat surface of the phenylalanine residue interacts with the charged side chain of the lysine residue. This interaction is strongest when the lysine's side chain is oriented perpendicular to the flat surface of the phenylalanine.
If two phenylalanine residues are located close to each other, the most favorable interaction between them would be an offset stacking interaction, where the two aromatic rings stack on top of each other in a parallel fashion with a slight offset to maximize Van der Waals interactions.
Learn more about lysine here:
https://brainly.com/question/21090800
#SPJ11
For each of the following sublevels, give the n and l values and the number of orbitals.
(a) 6d
n answer is 6
l?
number of orbitals?
(b) 6g
n answer is 6
l?
number of orbitals?
(c) 6p
n answer is 6
l?
number of orbitals?
The g sublevel is not part of the conventional notation for electron orbitals (s, p, d, and f are used). Therefore, I cannot provide an answer for this.
(a) 6d sublevel has n=6 and l=2, and it contains 10 orbitals.
(b) There is no such thing as a 6g sublevel. The maximum value for l is 5 for the 6f sublevel.
(c) 6p sublevel has n=6 and l=1, and it contains 6 orbitals.
(a) 6d
n = 6
l = 2 (d corresponds to l = 2)
Number of orbitals = 2l + 1 = 2(2) + 1 = 5
(b) 6g
(c) 6p
n = 6
l = 1 (p corresponds to l = 1)
Number of orbitals = 2l + 1 = 2(1) + 1 = 3.
Learn more about orbitals here:
https://brainly.com/question/18914648
#SPJ11
determine the most appropriate starting material to synthesize the following cyclic ether. (should you require one, use an iodide as the leaving group.)
To determine the most appropriate starting material to synthesize the following cyclic ether, we must consider using a cyclic acid, lactone, and iodide as the leaving group.
Let's understand this in detail;
Step 1: Identify the cyclic ether structure that you want to synthesize.
Step 2: Convert the cyclic ether into its corresponding cyclic acid by adding a hydroxyl group to one of the carbons and a carbonyl group to the adjacent carbon in the ring.
Step 3: Convert the cyclic acid to its lactone form. To do this, form an ester by closing the ring and forming a bond between the hydroxyl and carbonyl groups.
Step 4: To create the most appropriate starting material, replace the oxygen in the lactone's ester linkage with iodide as the leaving group. This will create a cyclic compound with the iodide ready to be replaced in a substitution reaction, forming the desired cyclic ether.
In summary, the most appropriate starting material for synthesizing the given cyclic ether would be a lactone with iodide as the leaving group instead of the ester oxygen.
Learn more about cyclic ethers: A cyclic ether which forms a 7 member ring will have the iupac name. https://brainly.com/question/31430305
#SPJ11
what product is expected from the reaction of fumaric acid (trans-2-butenedioic acid) with 1,3-butadiene?
The product expected from the reaction of fumaric acid (trans-2-butenedioic acid) with 1,3-butadiene is:
Your answer: The reaction of fumaric acid (trans-2-butenedioic acid) with 1,3-butadiene is expected to produce a Diels-Alder adduct, specifically, the bicyclic compound 4-cyclohexene-1,2-dicarboxylic acid.
1. Fumaric acid acts as the dienophile and 1,3-butadiene as the diene in this Diels-Alder reaction.
2. The double bond in fumaric acid reacts with the conjugated double bonds in 1,3-butadiene.
3. A new six-membered ring is formed as a result of this reaction.
4. The final product is 4-cyclohexene-1,2-dicarboxylic acid, which is a bicyclic compound.
To know more about Diels-Alder reaction :
https://brainly.com/question/30751490
#SPJ11
the volume of a sample of nitrogen gas increases from 5.0 l to 15.0 l against a constant pressure of 25 atm. what is w in joules for the gas given 1 atm.l = 101.3 j?
To calculate the work (w) done by the nitrogen gas in joules, we need to use the formula:
w = -PΔV
Where P is the pressure in atmospheres, ΔV is the change in volume in liters, and the negative sign indicates that the gas is doing work on its surroundings.
In this case, P = 25 atm, ΔV = 10.0 L (since the volume increases from 5.0 L to 15.0 L), and we convert the units of pressure and volume to SI units:
P = 25 atm x 101.3 kPa/atm = 2532.5 kPa
ΔV = 10.0 L x 0.001 m3/L = 0.01 m3
Substituting these values into the formula, we get:
w = -2532.5 kPa x 0.01 m3 = -25.325 J
Since the given conversion factor is 1 atm.L = 101.3 J, we can convert the units of work from joules to atm.L:
w = -25.325 J ÷ 101.3 J/atm.L = -0.25 atm.L
Therefore, the work done by the nitrogen gas is -0.25 atm.L, which indicates that the gas is doing work on its surroundings.
To calculate the work (w) done by the nitrogen gas as its volume increases from 5.0 L to 15.0 L against a constant pressure of 25 atm, we can use the formula:
w = -PΔV
where w is the work done, P is the constant pressure (25 atm), and ΔV is the change in volume (15.0 L - 5.0 L = 10.0 L).
w = -25 atm * 10.0 L
Now, we need to convert the work to Joules using the conversion factor 1 atm·L = 101.3 J:
w = -25 atm * 10.0 L * (101.3 J / 1 atm·L)
w = -25 * 10.0 * 101.3 J
w = -25325 J
So, the work done by the nitrogen gas is -25325 Joules.
Visit here to learn more about SI units brainly.com/question/12750330
#SPJ11
a slice of cheese pizza contains 16 grams of fat, 37 grams of carbohydrates, and 27 grams of protein. About how many Calories does it have
A slice of cheese pizza contains approximately 400 Calories.
How to determine the calorie content in food items? To calculate the number of Calories in a slice of cheese pizza with 16 grams of fat, 37 grams of carbohydrates, and 27 grams of protein, you can use the following steps:
1. Multiply the grams of fat by 9 Calories per gram: 16 grams x 9 Calories/gram = 144 Calories from fat.
2. Multiply the grams of carbohydrates by 4 Calories per gram: 37 grams x 4 Calories/gram = 148 Calories from carbohydrates.
3. Multiply the grams of protein by 4 Calories per gram: 27 grams x 4 Calories/gram = 108 Calories from protein.
Now, add the Calories from each macronutrient:
144 Calories (fat) + 148 Calories (carbohydrates) + 108 Calories (protein) = 400 Calories.
To know more about Calories:
https://brainly.com/question/30828015
#SPJ11
Last cilikSystem'. Change. ∆sA few grand of liquid water(h2o). The water ke cooled from 8.0°c. ∆s<0to -18.0°c. ∆s=0∆s>0not enough informationA few moles of nitrogen (n2) gas. The nitrogen is cooled from 63.0°c. ∆s<0to 8.0°c and is also compressed. ∆s=0from a volume of 11.0 l to a volume. ∆s>0of 4.0 l not enough informationA few moles of nitrogen (n2) gas. The nitrogen is heater from. ∆s<0-17.0°c to 67.0°c. While the. ∆s=0volume is held constant at 5.0 l. ∆s>0not enough information
The entropy change if water is cooled from 8.0°c. is, ∆s<0 to -18.0°c. Option a is correct.
As the water is cooled from 8.0°C to -18.0°C, it undergoes a phase transition from liquid to solid (ice). This is an exothermic process, which means that heat is released to the surroundings. In this case, the entropy change (∆S) can be determined using the equation ∆S = Q/T, where Q is the heat released and T is the temperature at which it is released. Since the process is exothermic, Q < 0. Therefore, as T decreases from 8.0°C to -18.0°C, ∆S < 0. The answer is (a).
To know more about water, here
brainly.com/question/28465561
#SPJ4
--The complete question is, 1. A few grand of liquid water(h2o). The water is cooled from 8.0°c.
a. ∆s<0 to -18.0°c.
b. ∆s=0
c. ∆s>0
d. not enough information--
reading:
The accelerometer keeps track of how quickly the speed of your vehicle is changing. When your car hits another car—or wall or telephone pole or deer—the accelerometer triggers the circuit. The circuit then sends an electrical current through the heating element, which is kind of like the ones in your toaster, except it heats up a whole lot quicker. This ignites the charge which prompts a decomposition reaction that fills the deflated nylon airbag (packed in your steering column, dashboard or car door) at about 200 miles per hour. The whole process takes a mere 1/25 of a second. The bag itself has tiny holes that begin releasing the gas as soon as it’s filled. The goal is for the bag to be deflating by time your head hits it. That way it absorbs the impact, rather than your head bouncing back off the fully inflated airbag and causing you the sort of whiplash that could break your neck. Sometimes a puff of white powder comes out of the bag. That’s cornstarch or talcum powder to keep the bag supple while it’s in storage. (Just like a rubberband that dries out and cracks with age, airbags can do the same thing.) Most airbags today have silicone coatings, which makes this unnecessary. Advanced airbags are multistage devices capable of adjusting inflation speed and pressure according to the size of the occupant requiring protection. Those determinations are made from information provided by seat-position and occupant-mass sensors. The SDM also knows whether a belt or child restraint is in use.
Today, manufacturers want to make sure that what’s occurring is in fact an accident and not, say, an impact with a pothole or a curb. Accidental airbag deployments would, after all, attract trial lawyers in wholesale lots. So if you want to know exactly what the deployment algorithm stored in the SDM is, just do what GM has done: Crash thousands of cars and study thousands of accidents. The Detonation: Decomposition Reactions Manufacturers use different chemical stews to fill their airbags. A solid chemical mix is held in what is basically a small tray within the steering column. When the mechanism is triggered, an electric charge heats up a small filament to ignite the chemicals and—BLAMMO!—a rapid reaction produces a lot of nitrogen gas. Think of it as supersonic Jiffy Pop, with the kernels as the propellant. This type of chemical reaction is called “decomposition”. A decomposition reaction is a reaction in which a compound breaks down into two or more simpler substances. A reaction is also considered to be decomposition even when one or more of the products are still compounds.
Equation 1. general form of decomposition equations When sodium azide (NaN3) decomposes, it generates solid sodium and nitrogen gas, making it a great way to inflate something as the small volume of solid turns into a large volume of gas. The decomposition of sodium azide results in sodium metal which is highly reactive and potentially explosive. For this reason, most airbags also contain potassium nitrate and silicon dioxide which react with sodium metal to convert it to harmless compounds. Equation 2. decomposition of sodium azide Ammonium nitrate (NH4NO3), though most commonly used in fertilizers, could also naturally decompose into gas if it’s heated enough, making it a non-toxic option as an airbag ingredient. Compared to the sodium axide standard, half the amount of solid starting material is required to produce the same three total moles of gas, though that total is comprised of two types, dinitrogen monoxide (N2O) and water vapor (H2O). Equation 3. decomposition of ammonium nitrate Highly explosive compounds like nitroglycerin (C3H5N3O9) are effective in construction, demolition, and mining applications, in part, because the products of decomposition are also environmentally safe and nontoxic. However, they are too shock-sensitive for airbag applications. Even a little bit of friction can cause nitroglycerin to explode, making it difficult to control. The explosive nature of this chemical is attributed to its predictable decomposition which results in nearly five times the number of moles of gas from only four moles of liquid starting material when compared to both sodium azide and ammonium nitrate alternatives.
You're are NOT answering this: Scientific question: How does the choice of chemical ingredient ia airbn ag influence their effectiveness.
As you talks about the dimensional analysis setup, stock and explain each part using da ts format he article.
Point directly to the collected data as evidence. Since the scientific question relates the chemical ingredients to effectiveness, you might consider discussing all the outcomes for each chemical ingredient (time, volume, popped/not inflated, enough/inflated perfectly, amount initially used separately.
The choice of chemical ingredients in airbags influences their effectiveness in several ways:
Time: Sodium azide ignites faster than ammonium nitrate, decomposing in under 1/25 sec vs. requiring heating to ignite. Sodium azide's faster ignition leads to quicker airbag inflation.
Volume: Sodium azide produces 3 moles of gas from 2 moles of solid, while ammonium nitrate produces 3 moles of gas from 4 moles of solid to achieve the same total moles of gas. Less starting material is needed for sodium azide to produce the same volume of gas.
Amount used: To produce the same volume of gas, half the amount of solid sodium azide (2 moles) is required compared to ammonium nitrate (4 moles). Less ingredient is needed for sodium azide.
Popped/Not inflated: Highly explosive compounds like nitroglycerin are too shock-sensitive and difficult to control, easily popping the airbag before it fully inflates. Sodium azide and ammonium nitrate can be controlled to properly inflate the airbag.
Enough/Inflated perfectly: Advanced airbags with sensors can determine the optimal amount of each chemical to inflate based on occupant size. Multiple stages of inflation are possible for perfect inflation control and cushioning. Single-stage less controlled explosions may over- or under-inflate the airbag.
Data:
Equation 1: General decomposition equation
Equation 2: Decomposition of sodium azide
Equation 3: Decomposition of ammonium nitrate
Sodium azide → 3 moles gas / 2 moles solid
Ammonium nitrate → 3 moles gas / 4 moles solid
Nitroglycerin → 5 moles gas / 4 moles liquid
In summary, the choice of chemical impacts how quickly, how much, and how controllably the airbag inflates. Sodium azide and ammonium nitrate can be optimized and controlled, while nitroglycerin is too volatile. Less material is needed for faster-acting sodium azide. Advanced sensors enable perfectly inflating multistage airbags regardless of the chemical mixture. The data and equations show the mole ratios for each chemical decomposition.
Please let me know if you need any clarification or have additional questions!
Use the attached figure (Fig. 1 in Topic 4C of Atkins and dePaulo) to estimate the total volume of a solution formed by mixing 50.0 cm3 of pure ethanol with 50.0 cm3 of pure water. The densities of the two pure liquids are 0.789 and 1.000 g cm-3, respectively.
To estimate the total volume of the solution formed by mixing 50.0 cm³ of pure ethanol with 50.0 cm³ of pure water, you need to calculate the masses of ethanol and water, find the density of the solution using the provided figure, and then divide the total mass by the density of the solution.
To estimate the total volume of the solution formed by mixing 50.0 cm3 of pure ethanol with 50.0 cm3 of pure water using Fig. 1 in Topic 4C of Atkins and dePaulo, we need to first locate the point on the graph where the two densities intersect.
From the graph, we can see that the intersection point is at approximately 0.93 g cm-3. This means that the density of the resulting solution will be around 0.93 g cm-3.
To find the total volume of the solution, we can use the equation:
density = mass / volume
Rearranging the equation, we can solve for the volume:
volume = mass / density
Since we are mixing equal volumes of ethanol and water, we can assume that the mass of each liquid will be equal to its volume (since the density is given in g cm-3). Therefore, the total mass of the solution will be:
mass = 50.0 g (ethanol) + 50.0 g (water) = 100.0 g
Substituting this mass and the density of the solution into the equation, we get:
volume = 100.0 g / 0.93 g cm-3 = 107.5 cm3
Therefore, the total volume of the solution formed by mixing 50.0 cm3 of pure ethanol with 50.0 cm3 of pure water is approximately 107.5 cm3.
Since I cannot view the attached figure, I will provide a general explanation using the given information. To estimate the total volume of the solution formed by mixing 50.0 cm³ of pure ethanol with 50.0 cm³ of pure water, you can follow these steps:
1. Calculate the mass of ethanol and water using their respective densities and volumes:
- Mass of ethanol = density of ethanol x volume of ethanol = 0.789 g/cm³ x 50.0 cm³ = 39.45 g
- Mass of water = density of water x volume of water = 1.000 g/cm³ x 50.0 cm³ = 50.0 g
2. Calculate the total mass of the solution:
- Total mass = mass of ethanol + mass of water = 39.45 g + 50.0 g = 89.45 g
3. Refer to the figure in Topic 4C of Atkins and dePaulo, find the density of the solution with the given masses of ethanol and water.
4. Calculate the total volume of the solution using the density from the figure:
- Total volume = total mass / density of the solution
In summary, to estimate the total volume of the solution formed by mixing 50.0 cm³ of pure ethanol with 50.0 cm³ of pure water, you need to calculate the masses of ethanol and water, find the density of the solution using the provided figure, and then divide the total mass by the density of the solution.
To learn more about mass, click here:
brainly.com/question/28305707
#SPJ11
1) The end point (or equivalence point ) of your acid (HCl) and base NaOH titration occurred whenA) The acid and the base neutralized each otherB) The number of moles of H+ = the number of moles of OH-C) The indicator turned a different colorD) Both A and BE) A, B and C are correct
E) The answers are A, B, and C. Your acid (HCl) and base (NaOH) titration reached its end point (or equivalence point) when: A) The acid and base neutralised one another.
The right response is B: Your acid and base titration of HCl and NaOH reached its end point (or equivalence point) when the moles of H+ and OH- were equal. Since the base and all of the acid have now interacted, the solution is now neutral. It is not required to utilise an indication; it merely aids in visually identifying when the equivalence point is achieved.
Learn more about The acid here:
https://brainly.com/question/1487118
#SPJ11
consider the following reaction: 2Mg(s)+O2(g)→2MgO(s)ΔH=−1204kJ
Part A
Is this reaction exothermic or endothermic?
Exothermic
endothermic
The given reaction represents the combination of magnesium and oxygen to form magnesium oxide, releasing energy as heat in an exothermic process. The reaction is not endothermic because the ΔH value is negative, signifying a release of energy.
The reaction you provided is:
2Mg(s) + O2(g) → 2MgO(s) ΔH = -1204 kJ
Here's an explanation that includes the terms you mentioned:
In this reaction, magnesium (Mg) solid reacts with oxygen (O2) gas to produce magnesium oxide (MgO) solid. The negative ΔH value (-1204 kJ) indicates that this is an exothermic reaction, meaning it releases energy in the form of heat. An exothermic reaction is the opposite of an endothermic reaction. In an endothermic reaction, energy is absorbed from the surroundings, causing the ΔH value to be positive. However, since the ΔH for this reaction is negative, it is not endothermic. Instead, it is exothermic as energy is released.
To know more about exothermic reactions refer to
https://brainly.com/question/2924714
#SPJ11
if the b of a weak base is 5.6×10−6, what is the ph of a 0.32 m solution of this base?
The pH of a 0.32 M solution of this weak base is approximately 11.13.
To calculate the pH of a 0.32 M solution of a weak base with a Kb value of 5.6 × 10⁻⁶, we can use the formula:
Kb = [OH⁻]² / [Base]
First, let's find the [OH⁻] (concentration of hydroxide ions):
5.6 × 10⁻⁶ = [OH⁻]² / 0.32
[OH⁻]² = 5.6 × 10⁻⁶ × 0.32
[OH⁻] = √(1.792 × 10⁻⁶)
[OH⁻] = 1.34 × 10⁻³ M
Next, we can calculate the pOH using the formula:
pOH = -log10([OH⁻])
pOH = -log10(1.34 × 10⁻³)
pOH ≈ 2.87
Finally, we can find the pH using the relationship between pH and pOH:
pH + pOH = 14
pH = 14 - pOH
pH = 14 - 2.87
pH ≈ 11.13
Learn More about pH here :-
https://brainly.com/question/30656928
#SPJ11
draw the structure(s) of the organic product(s) of the claisen condensation reaction between ethyl propanoate and ethyl benzoate.
CH3CH2C(O)CH2CH2CO2Et. The organic product of the Claisen condensation reaction between ethyl propanoate and ethyl benzoate is ethyl 3-(benzoyloxy)propanoate, a β-keto ester.
The Claisen condensation reaction between ethyl propanoate and ethyl benzoate involves ester enolates and ester carbonyl groups. In this case, the ethyl propanoate acts as the enolate ion donor and ethyl benzoate are the electrophilic carbonyl compound. The reaction results in the formation of a β-keto ester product. The Claisen condensation reaction between ethyl propanoate and ethyl benzoate would result in the formation of a β-ketoester product. The reaction mechanism involves the deprotonation of the α-carbon of ethyl propanoate by a strong base (e.g. sodium ethoxide) to form an enolate intermediate. This enolate intermediate then attacks the carbonyl carbon of ethyl benzoate, resulting in the formation of a tetrahedral intermediate. This intermediate undergoes dehydration and decarboxylation to form the β-ketoester product.
The structure of the β-ketoester product is shown below: CH3CH2C(O)CH2CH2CO2Et . This product has a β-keto ester functional group, which consists of a carbonyl group (C=O) and a ketone group (C=O) that are separated by a single carbon atom (hence the name "β-keto"). Overall, the Claisen condensation reaction between ethyl propanoate and ethyl benzoate results in the formation of a β-ketoester product with the elimination of one molecule of ethoxide.
Learn more about Claisen condensation here: brainly.com/question/31180665
#SPJ11
CH3CH2C(O)CH2CH2CO2Et. The organic product of the Claisen condensation reaction between ethyl propanoate and ethyl benzoate is ethyl 3-(benzoyloxy)propanoate, a β-keto ester.
The Claisen condensation reaction between ethyl propanoate and ethyl benzoate involves ester enolates and ester carbonyl groups. In this case, the ethyl propanoate acts as the enolate ion donor and ethyl benzoate are the electrophilic carbonyl compound. The reaction results in the formation of a β-keto ester product. The Claisen condensation reaction between ethyl propanoate and ethyl benzoate would result in the formation of a β-ketoester product. The reaction mechanism involves the deprotonation of the α-carbon of ethyl propanoate by a strong base (e.g. sodium ethoxide) to form an enolate intermediate. This enolate intermediate then attacks the carbonyl carbon of ethyl benzoate, resulting in the formation of a tetrahedral intermediate. This intermediate undergoes dehydration and decarboxylation to form the β-ketoester product.
The structure of the β-ketoester product is shown below: CH3CH2C(O)CH2CH2CO2Et . This product has a β-keto ester functional group, which consists of a carbonyl group (C=O) and a ketone group (C=O) that are separated by a single carbon atom (hence the name "β-keto"). Overall, the Claisen condensation reaction between ethyl propanoate and ethyl benzoate results in the formation of a β-ketoester product with the elimination of one molecule of ethoxide.
Learn more about Claisen condensation here: brainly.com/question/31180665
#SPJ11
what concentrations of acedic acid and sodium acetate are required to prepare a buffer solution with a ph of 4.60?
Prepare a buffer solution with a pH of 4.60, you need to use concentrations of acetic acid is 0.715 M and sodium acid is 0.285 M
Prepare a buffer solution with a pH of 4.60, you need to use a specific ratio of acetic acid and sodium acetate concentrations. The Henderson-Hasselbalch equation can be used to determine the appropriate concentrations:
pH = pKa + log([tex]\frac{[A-]}{[HA]}[/tex])
where pKa is the dissociation constant for acetic acid (4.76), [A-] is the concentration of the acetate ion, and [HA] is the concentration of undissociated acetic acid.
Rearranging the equation, we get:
[tex]\frac{[A-]}{[HA]}[/tex]= 10(pH - pKa)
Substituting in the values for pH and pKa, we get:
= 10[tex]\frac{[-H]}{[HA]}[/tex](4.60 - 4.76) = 0.398
So, the ratio of [tex]\frac{[A-]}{[HA]}[/tex] is 0.398.
To determine the concentrations needed, we can assume a total concentration of the buffer components (acetic acid and sodium acetate) to be 1.00 M.
Let x be the concentration of acetic acid, then the concentration of acetate ion will be 1.00 - x.
Using the ratio of [tex]\frac{[A-]}{[HA]}[/tex]above, we can set up the equation:
0.398 = (1.00 - x)/x
Solving for x, we get:
x = 0.715 M acetic acid
1.00 - x = 0.285 M sodium acetate
Learn more about Henderson-Hasselbalch equation here
https://brainly.com/question/13423434
#SPJ11
Explain the following variations in atomic or ionic radii: Co >Co2+>Co3+ 1. The 4s valence electrons in Fe are on average farther from the nucleus than the 3d electrons, so Fe is larger than Co2+.2. Because there are five 3d orbitals, in Co2+ at least one orbital must contain a pair of electrons.3. Removing one electron to form Co3+ significantly reduces repulsion, increasing the nuclear charge experienced by each of the other d electrons and decreasing the size of the ion.
The given variations in atomic or ionic radii can be explained by looking at the electron configuration of each species.
Co is the neutral atom with an electron configuration of [Ar] 3d^7 4s^2. Co2+ is the cation obtained after losing two electrons and has an electron configuration of [Ar] 3d^7. Co3+ is the cation obtained after losing three electrons and has an electron configuration of [Ar] 3d^6.
The first variation can be explained by the fact that Fe, which is the element preceding Co in the same period, has its 4s valence electrons farther from the nucleus than the 3d electrons. This is due to the shielding effect of the inner electrons. Similarly, Co has its 4s electrons farther from the nucleus than the 3d electrons, making it larger than Co2+.
The second variation is due to the presence of electrons in the 3d orbitals of Co2+. There are five 3d orbitals, and each orbital can hold a maximum of two electrons. At least one orbital in Co2+ must contain a pair of electrons, which causes repulsion between the electrons and reduces the effective nuclear charge experienced by each electron. This results in an increase in the size of Co2+ compared to Co.
The third variation is due to the removal of one electron from Co2+ to form Co3+. This significantly reduces the repulsion between the electrons in the 3d orbitals, which increases the nuclear charge experienced by each electron. This reduces the size of the Co3+ ion compared to Co2+.
In summary, the variations in atomic or ionic radii of Co, Co2+, and Co3+ can be explained by the electron configuration and the effects of repulsion and nuclear charge on the size of the ion.
Learn more about atomic here:
https://brainly.com/question/8834373
#SPJ11
Which of the following is not an ortho-para director in electrophilic aromatic substitution? C. -CH3 ] D.-OCH3 E. -CF3
In electrophilic aromatic substitution, the compound that is not an ortho-para director is E. -CF3.
Ortho-para directors are groups that direct the incoming electrophile to the ortho or para positions due to their electron-donating nature. -CH3 and -OCH3 are electron-donating groups, making them ortho-para directors. In contrast, -CF3 is an electron-withdrawing group and acts as a meta-director instead of an ortho-para director in electrophilic aromatic substitution. Meta-directing groups are the ones who tell the arriving group where to arrange itself. Due to their propensity to not contribute electrons, Meta functions as a Deactivating Group. Thus the correct answer is E. -CF3.
Learn more about electrophilic aromatic substitution: https://brainly.com/question/30761476
#SPJ11
Which statement about the molecular orbitals in a molecule is correct? (A) No molecular orbital may have a net overlap with (B) Each molecular orbital must have a different number(C) The number of molecular orbitals is equal to half the any other molecular orbital. ind of nodes than every other molecular orbital. number of atomic orbitals of the atoms that make up the molecule. The lowest-energy molecular orbitals are the most molecular orbitals are the most bonding in character (D) antibonding in character and the highest-energy
The correct statement about molecular orbitals in a molecule is: The number of molecular orbitals is equal to the number of atomic orbitals of the atoms that make up the molecule.(C)
In a molecule, atomic orbitals combine to form molecular orbitals through a process called linear combination of atomic orbitals (LCAO). Each molecular orbital is formed by the combination of two atomic orbitals.
The number of molecular orbitals formed will be equal to the number of atomic orbitals involved in the process. Molecular orbitals with lower energy are more bonding in character, while those with higher energy are more antibonding in character.
It is important to note that no molecular orbital can have a net overlap with any other molecular orbital, and each molecular orbital will have a different kind of nodes than every other molecular orbital.
To know more about linear combination of atomic orbitals click on below link:
https://brainly.com/question/29659143#
#SPJ11
The Kb of ammonia, NH3, is 1.8 × 10-5. What is true about the equilibrium of NH3 in water? we can use to do other calculations Transcript Content attribution Explain the lonization of Weak Acids and Bases Question The K, of ammonia, NH3is 1.8 x 10 .What is true about the equilibrium of NH3 in water? Select the correct answer below: O The equilibrium strongly favors the unionized form. O There is mostly conjugate acid and hydroxide ion at equilibrium. O Ammonia ionizes almost completely in water. O There is a large (OH at equilibrium FEEDBACK MORE INSTRUCT Content attribution
The K b of ammonia, NH3, is 1.8 × 10^-5. What is true about the equilibrium of NH3 in water:
The correct answer is: The equilibrium strongly favors the unionized form.
When ammonia (NH3) dissolves in water, it undergoes partial ionization to form its conjugate acid (NH4+) and hydroxide ion (OH-). The ionization can be represented by the following equation:
NH3(a q) + H2O(l) ⇌ NH4+(a q) + OH-(a q)
The K b value (1.8 × 10^-5) represents the base ionization constant of ammonia. A small K b value indicates that the equilibrium lies predominantly towards the reactants (unionized ammonia) rather than the products (conjugate acid and hydroxide ion).
Therefore, the equilibrium strongly favors the unionized form of ammonia in water.
To know more about Ionization:
https://brainly.com/question/1602374
#SPJ11
Arrange the following elements in order of decreasing ionic radius: 1 = largest ; 4 = smallest
Mg2+
F-
Cl-
K+
F-
Cl-
K+
K+, Cl-, Mg2+, F- . The trend for ionic radius is that as you move down a group on the periodic table, the ionic radius increases. As you move across a period, the ionic radius decreases due to the increasing nuclear charge.
Therefore, K+ has the largest ionic radius because it is in the bottom group and has lost an electron, making it larger. F- has the smallest ionic radius because it is in the top group and has gained an electron, making it smaller. Mg2+ is smaller than K+ because it is in the same row, but has a higher nuclear charge. Cl- is larger than F- because it is in the same row, but has more electrons and is more spread out.
Learn more about electrons here: brainly.com/question/28977387
#SPJ11
How many different functions are there from a set having eight elements to a set having three elements?
There are 3⁸ = 6,561 different functions from a set having eight elements to a set having three elements.
Each of the eight elements in the domain can be mapped to one of the three elements in the codomain, and there are three choices for each element, resulting in 3⁸ possibilities.
To see why this is true, imagine a table with eight rows and three columns, representing the elements in the domain and the elements in the codomain, respectively. Each cell in the table can be filled with one of the three elements, giving us 3⁸ total possible functions.
This number is much larger than the number of functions from a set to itself, which is simply 8! = 40,320. It's also important to note that many of these functions will not be injective or surjective, meaning that they will not satisfy the one-to-one or onto conditions, respectively.
To know more about codomain click on below link:
https://brainly.com/question/17513079#
#SPJ11
calculate the δhorxn for the combustion of ethanol using the given δhof. δhof , ethanol (l) = -277.6 kj/mol δh°f, water (l) = -285.8 kj/mol δh°f, carbon dioxide (g) = -393.5 kj/mol
The δhorxn for the combustion of ethanol is -1815.2 kJ/mol.
To calculate the δhorxn for the combustion of ethanol, we need to first write the balanced chemical equation for the combustion of ethanol, which is:
C[tex]^{2}[/tex]H[tex]^{5}[/tex]OH(l) + 3O[tex]^{2}[/tex](g) → 2CO[tex]^{2}[/tex](g) + 3H[tex]^{2}[/tex]O(l)
The δhorxn for this reaction can be calculated using Hess's Law, which states that the overall enthalpy change of a reaction is equal to the sum of the enthalpy changes of the individual steps of the reaction.
We can break down the combustion of ethanol into:
1) C[tex]^{2}[/tex]H[tex]^{5}[/tex]OH(l) + 3/2O[tex]^{2}[/tex](g) → 2CO(g) + 3H[tex]^{2}[/tex]O(l) (incomplete combustion)
2) 2CO(g) + O[tex]^{2}[/tex](g) → 2CO[tex]^{2}[/tex](g)
3) 2H[tex]^{2}[/tex](g) + O[tex]^{2}[/tex](g) → 2H[tex]^{2}[/tex]O(l)
The δhorxn for each of these steps can be calculated using the given δhof values:
1) δhorxn = [2δhof(CO(g)) + 3δhof(H[tex]^{2}[/tex]O(l))] - [δhof(C[tex]^{2}[/tex]H[tex]^{5}[/tex]OH(l)) + 3/2δhof(O2(g))]
= [2(-110.5) + 3(-285.8)] - [-277.6 + 3/2(0)]
= -677.6 kJ/mol
2) δhorxn = [2δhof(CO[tex]^{2}[/tex](g))] - [2δhof(CO(g)) + δhof(O[tex]^{2}[/tex](g))]
= [2(-393.5)] - [2(-110.5) + 0]
= -566.0 kJ/mol
3) δhorxn = [2δhof(H[tex]^{2}[/tex]O(l))] - [2δhof(H[tex]^{2}[/tex](g)) + δhof(O[tex]^{2}[/tex](g))]
= [2(-285.8)] - [2(0) + 0]
= -571.6 kJ/mol
Finally, we can add up the δhorxn values for each step to get the overall δhorxn for the combustion of ethanol:
δhorxn = δhorxn(step 1) + δhorxn(step 2) + δhorxn(step 3)
= -677.6 kJ/mol + (-566.0 kJ/mol) + (-571.6 kJ/mol)
= -1815.2 kJ/mol
Therefore, -1815.2 kJ/mol is the δhorxn for the combustion of ethanol.
More on combustion: https://brainly.com/question/16873383
#SPJ11
Consider the following reaction at 275 K:
1 A (aq) + 2 B (aq) → 2 C (aq) + 1 D (aq)
An experiment was performed with the following intitial concentrations: [A]i = 1.49 M, [B]i = 2.01 M, [C]i = 0.29 M, [D]i = 0.29 M. The reaction was allowed to proceed until equilibrium was reached at which time it was determined that [A] = 0.55 M. What was the maximum amount of work that could have been performed as the reaction began?
Maximum amount of work performed as the reaction began (in kJ)=
From the stoichiometry, we know that 1 mole of A and 2 moles of B reacted to produce 2 moles of C and 1 mole of D. The maximum amount of work that could have been performed as the reaction began is 49.6 kJ.
To determine the maximum amount of work that could have been performed as the reaction began, we need to calculate the change in Gibbs free energy (ΔG) of the system.
First, we need to find the equilibrium concentrations of all species. Since the stoichiometry of the reaction is 1:2:2:1, we know that at equilibrium:
[A] = 0.55 M
[B] = 2.01 - 2x M
[C] = 0.29 + 2x M
[D] = 0.29 + x M
where x is the change in concentration of species B and D at equilibrium.
To find x, we can use the equilibrium constant (Kc) expression:
Kc = ([C]eq[D]eq)/([A]eq[B]eq^2)
Substituting the equilibrium concentrations:
Kc = (0.29 + 2x)(0.29 + x)/(0.55)(2.01 - 2x)^2
Solving for x gives x = 0.222 M.
Therefore, at equilibrium:
[A] = 0.55 M
[B] = 1.57 M
[C] = 0.74 M
[D] = 0.512 M
Now we can calculate the change in Gibbs free energy of the system:
ΔG = ΔG° + RT ln(Q)
where ΔG° is the standard free energy change of the reaction, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.
Since the reaction is at equilibrium, Q = Kc and ΔG = 0.
ΔG° can be calculated using the standard free energy change of formation of each species:
ΔG° = (2ΔG°f[C] + ΔG°f[D]) - (ΔG°f[A] + 2ΔG°f[B])
Substituting the values from a table of standard free energy changes of formation:
ΔG° = (2(-326.6) + (-237.1)) - ((-150.3) + 2(-240.2)) = -49.4 kJ/mol
Finally, we can calculate the maximum amount of work that could have been performed as the reaction began using:
Maximum work = -ΔG = 49.4 kJ/mol
To find the maximum amount of work performed, we need to multiply this value by the amount of moles of reactants that underwent the reaction. From the stoichiometry, we know that 1 mole of A and 2 moles of B reacted to produce 2 moles of C and 1 mole of D. Therefore, the amount of moles of reactants is:
n = min([A]i, [B]i/2) = min(1.49 M, 1.005 M) = 1.005 mol
Multiplying by the maximum work per mole gives:
Maximum amount of work performed = 49.4 kJ/mol x 1.005 mol = 49.6 kJ
Therefore, the maximum amount of work that could have been performed as the reaction began is 49.6 kJ.
Learn more about amount here:
https://brainly.com/question/13024617
#SPJ11
9. The solubility of the artist’s pigment chrome yellow, PbCrO4, is 4.3 × 10–5 g/L. Determine the solubility product equilibrium constant for PbCrO4.
The solubility product equilibrium constant for PbCrO4 is 1.77 × 10⁻¹⁴ in pigment chrome yellow.
To determine the solubility product equilibrium constant (Ksp) for the artist's pigment chrome yellow, PbCrO4, you first need to write the balanced dissolution equation:
PbCrO4 (s) ⇌ Pb²⁺ (aq) + CrO₄²⁻ (aq)
The solubility of PbCrO4 is given as 4.3 × 10⁻⁵ g/L. Convert this to moles per liter (M) using the molar mass of PbCrO4 (323.2 g/mol):
(4.3 × 10⁻⁵ g/L) / (323.2 g/mol) ≈ 1.33 × 10⁻⁷ M
Now, let's express the equilibrium concentrations in terms of the solubility (S):
[Pb²⁺] = [CrO₄²⁻] = 1.33 × 10⁻⁷ M
Finally, we can determine the Ksp:
Ksp = [Pb²⁺] [CrO₄²⁻] = (1.33 × 10⁻⁷ M)² ≈ 1.77 × 10⁻¹⁴
So, the solubility product equilibrium constant (Ksp) for the artist's pigment chrome yellow, PbCrO4, is approximately 1.77 × 10⁻¹⁴.
Learn more about solubility here
https://brainly.com/question/28170449
#SPJ11
draw a dash-wedge structure for (3s,4r)-4-fluoro-2,4-dimethylheptan-3-ol.
The dash-wedge structure for (3S,4R)-4-fluoro-2,4-dimethylheptan-3-ol can be drawn as follows:
To draw a dash-wedge structure for a molecule, we need to first determine the stereochemistry of each chiral center in the molecule.
The prefix (3S,4R) in the given compound indicates that the hydroxyl group (-OH) at the third carbon (C3) is on the same side (S) as the lowest priority group (hydrogen, H) and the methyl group (-CH3) at the fourth carbon (C4) is on the opposite side (R) of the molecule.
Next, we need to draw a skeletal structure of the compound and add the substituent groups at each carbon. The given compound has a seven-carbon chain with a methyl group (-CH3) and a fluoro group (-F) attached to the fourth carbon (C4) and a hydroxyl group (-OH) attached to the third carbon (C3).
To draw the dash-wedge structure, we represent bonds that are in the plane of the paper with a solid line, bonds that extend out of the plane of the paper with a wedge, and bonds that extend into the plane of the paper with a dash. Using this convention, we can draw the dash-wedge structure of (3S,4R)-4-fluoro-2,4-dimethylheptan-3-ol, as shown above.
For more questions like Bond click the link below:
https://brainly.com/question/28489869
#SPJ11
will a percipate form when 20 ml of a 0.010m agno3 is mixed with 10.0ml of 0.015 m naio3. true or false
False. A precipitate will not form when 20 ml of a 0.010m AgNO3 is mixed with 10.0ml of 0.015 m NaIO3.
Hi there! I assume you meant "precipitate" instead of "p e r ci pate." In that case, my answer is:
True, a precipitate will form when 20 mL of a 0.010 M AgNO3 solution is mixed with 10.0 mL of a 0.015 M NaIO3 solution. The reaction between AgNO3 and NaIO3 will produce AgIO3, which is a precipitate, and NaNO3, which remains in solution.
To determine if a precipitate will form when solutions of silver nitrate (AgNO3) and sodium iodate (NaIO3) are mixed, we need to compare the solubility product (K s p) of the product of the possible reaction, which is AgIO3.
The balanced equation for the reaction is:
AgNO3 + NaIO3 → AgIO3 + NaNO3
The Ksp expression for AgIO3 is:
Ksp = [Ag+][IO3-]
where [Ag+] and [IO3-] are the concentrations of Ag+ and IO3- ions, respectively, at equilibrium.
The Ksp value for AgIO3 is 1.5 x 10^-12.
To calculate the concentrations of Ag+ and IO3- ions in the solution after mixing the two solutions, we use the following equations:
n(Ag+) = V(AgNO3) x C(AgNO3)
n(IO3-) = V(NaIO3) x C(NaIO3)
where n(Ag+) and n(IO3-) are the number of moles of Ag+ and IO3- ions, respectively, V(AgNO3) and V(NaIO3) are the volumes of AgNO3 and NaIO3 solutions, respectively, and C(AgNO3) and C(NaIO3) are the concentrations of AgNO3 and NaIO3 solutions, respectively.
Plugging in the given values, we get:
n(Ag+) = (20 mL) x (0.010 mol/L) = 0.0002 mol
n(IO3-) = (10 mL) x (0.015 mol/L) = 0.00015 mol
To determine if a precipitate will form, we need to compare the product of the ion concentrations, [Ag+][IO3-], with the Ksp value.
[Ag+][IO3-] = (0.0002 mol/L) x (0.00015 mol/L) = 3 x 10^-8
Since [Ag+][IO3-] is greater than the K s p value of AgIO3, a precipitate of AgIO3 will form.
Therefore, the statement "A precipitate will form when 20 ml of a 0.010m AgNO3 is mixed with 10.0ml of 0.015 m NaIO3" is true.
Learn more about precipitate here;
https://brainly.com/question/30904755
#SPJ11
A formic acid buffer solution contains 0.15 M H C O O H and 0.30 M H C O O − . The pKa of formic acid is 3.75. What is the pH of the buffer?
The pH of the formic acid buffer solution is 3.86.
To find the pH of the buffer solution, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa and the concentrations of the acid and conjugate base components of the buffer.
Henderson-Hasselbalch equation: pH = pKa + log([conjugate base]/[acid])
In this case, the acid is formic acid (HCOOH) and the conjugate base is formate ion (HCOO⁻). The pKa of formic acid is given as 3.75.
Using the given concentrations, we can calculate the ratio of [conjugate base]/[acid]:
[conjugate base]/[acid] = 0.30/0.15 = 2
Now we can substitute the values into the Henderson-Hasselbalch equation and solve for pH:
pH = 3.75 + log(2) = 3.86
This indicates that the buffer solution is slightly acidic, which is expected since the pH is below the pKa of formic acid. The buffer will be able to resist changes in pH when small amounts of acid or base are added to it, as long as the concentrations of the acid and conjugate base components remain relatively constant.
learn more about pH here:
https://brainly.com/question/26856926
#SPJ11
The pH of the formic acid buffer solution is 3.86.
To find the pH of the buffer solution, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the pKa and the concentrations of the acid and conjugate base components of the buffer.
Henderson-Hasselbalch equation: pH = pKa + log([conjugate base]/[acid])
In this case, the acid is formic acid (HCOOH) and the conjugate base is formate ion (HCOO⁻). The pKa of formic acid is given as 3.75.
Using the given concentrations, we can calculate the ratio of [conjugate base]/[acid]:
[conjugate base]/[acid] = 0.30/0.15 = 2
Now we can substitute the values into the Henderson-Hasselbalch equation and solve for pH:
pH = 3.75 + log(2) = 3.86
This indicates that the buffer solution is slightly acidic, which is expected since the pH is below the pKa of formic acid. The buffer will be able to resist changes in pH when small amounts of acid or base are added to it, as long as the concentrations of the acid and conjugate base components remain relatively constant.
learn more about pH here:
https://brainly.com/question/26856926
#SPJ11
draw the structure of the michael addition product cylochexanone and morphiline
The structure of the Michael addition product can be represented as follows:
O
||
CH2-C-C-CH2-N(CH2CH2)2
||
H
How to create a Michael addition product?The Michael addition reaction between cyclohexanone and morpholine involves the attack of the nitrogen atom of morpholine on the β-carbon of cyclohexanone, resulting in the formation of a new carbon-carbon bond. The product is a six-membered cyclic compound that contains both the cyclohexanone and morpholine moieties.
In this structure, the cyclohexanone moiety is represented by the carbonyl group (C=O) and the adjacent β-carbon (C), while the morpholine moiety is represented by the nitrogen atom (N) and the two ethylene groups (CH2CH2) attached to it.
Find out more on Michael addition product here: https://brainly.com/question/15878158
#SPJ1
The major factors affecting reaction rates account for which of the following observations: a) Tadpoles grow more rapidly near the cooling water discharge from power plant b) Enzymes accelerate certain biochemical reactions, but are not consumed. c) Campfires are started with twigs not with wood logs. d) iron and steel corrode more rapidly near the coast of an ocean than in the desert
All of the given observations can be explained by the principles of chemical kinetics and the factors that affect reaction rates in different environments.
The major factors affecting reaction rates of the following observations.
For a), the cooling water discharge from a power plant may contain chemicals that can accelerate or enhance biochemical reactions in tadpoles, leading to faster growth rates.
For b), enzymes are catalysts that can speed up biochemical reactions by lowering the activation energy required, but they themselves are not consumed or used up in the reaction.
For c), twigs are used to start campfires because they have a higher surface area-to-volume ratio, which allows for more efficient burning and faster reaction rates compared to larger wood logs.
For d), the presence of salt and moisture in ocean air can accelerate the corrosion of iron and steel, leading to faster reaction rates compared to the dry desert environment.
To know more about chemical kinetics and the reaction rates, click on the below link:
hthttps://brainly.com/question/28940590
#SPJ11