Find the output for the graph
y = 12x - 8
when the input value is 2.
y = [?]

Once you have computed the expected value, you can mark your guess on the graph by finding the point where the curve is balanced. This is the point where the area to the left of the point is equal to the area to the right of the point.

A probability density function is a function that describes the likelihood of a random variable taking on a certain value. The area under the curve of a probability density function must be equal to 1. The normalizing constant, denoted by k, is a constant that is multiplied by the probability density function to ensure that the area under the curve is equal to 1. In other words, k is the value that makes the integration of the probability density function equal to 1.

To find the value of k, you would need to integrate the probability density function over its entire range and set the result equal to 1. Once you have found k, you can sketch the density function by plotting the function on the y-axis and the possible values of x on the x-axis.

The expected value of a random variable is a measure of the center of its distribution. It represents the average value that the variable would take if it were repeated many times. To compute the expected value of a continuous random variable, you would need to integrate the product of the random variable and its probability density function over its entire range.

Once you have computed the expected value, you can mark your guess on the graph by finding the point where the curve is balanced. This is the point where the area to the left of the point is equal to the area to the right of the point.

to learn more about probability click here:

https://brainly.com/question/15124899

#SPJ11

Find the volume of a pyramid with a square base, where the perimeter of the base is 18.2 in and the height of the pyramid is 10.9 in. Round your answer to the nearest tenth of a cubic inch.

The linear interpolation spline between points (0,1) and (1,0) for x=1/2 is y=1/2. The quadratic interpolation spline using (0,1), (1,0), and (5/2,0) is y=-8/5x^2 + 9/5x + 1 for x in [1/2,5/2].

To find the linear interpolation spline and quadratic interpolation spline, we can use the following formulas

For linear interpolation, the spline between data points (x1,y1) and (x2,y2) is given by

y = y1 + (y2-y1)/(x2-x1)*(x-x1)

For quadratic interpolation, the spline between data points (x1,y1), (x2,y2) and (x3,y3) is given by

y = y1*((x-x2)(x-x3))/((x1-x2)(x1-x3)) + y2*((x-x1)(x-x3))/((x2-x1)(x2-x3)) + y3*((x-x1)(x-x2))/((x3-x1)(x3-x2))

To find the linear interpolation spline, we can use the points (0,1) and (1,0) since they are the nearest neighbors to x = 1/2:

y = 1 + (0-1)/(1-0)*(1/2-0) = 1/2

Therefore, the linear interpolation spline is y = 1/2 for x in [1/2,1].

To find the quadratic interpolation spline, we need to use three neighboring points. We can use (0,1), (1,0), and (5/2,0) since they are the three nearest neighbors to x = 1/2. Substituting these values into the formula, we get

y = 1*((x-1)(x-5/2))/((0-1)(0-5/2)) + 0*((x-0)(x-5/2))/((1-0)(1-5/2)) + 0*((x-0)(x-1))/((5/2-0)(5/2-1))

Simplifying, we get:

y = -8/5x^2 + 9/5x + 1

Therefore, the quadratic interpolation spline is y = -8/5x^2 + 9/5x + 1 for x in [1/2,5/2].

To know more about interpolation spline:

https://brainly.com/question/31321449

#SPJ4

Answer:

4

Step-by-step explanation:

(b + c)/2 = 6

b + c = 12

(a + b + c + d)/4 = 5

(a + 12 + d) = 20

a + d = 8

Hence,

the sum of the largest and smallest is 8. The mean has to be 8/2 = 4.

Hope this helps and be sure to mark this as brainliest! :)

The arrow symbolizes the directional connection from each member in set x to its corresponding member in set y. The members of set y are evident squares of their respective counterparts in set x.

Here is an arrow diagram to show the relation between the sets x and y, where y is the set of all elements in x squared:

     (1, 4, 9)

        / \

       /   \

      /     \

  1, 4, 9  -->  1, 4, 9, 16, 25, 36

       \     /

        \   /

         \ /

(3, 2, 1, -1, -2, -3)

      The arrow symbolizes the directional connection from each member in set x to its corresponding member in set y. The members of set y are evident squares of their respective counterparts in set x.

Read more about arrow diagram here:

https://brainly.com/question/31435848

#SPJ1

The probability that z is between -2.33 and 2.33 for a standard normal distribution with a mean of 0 and standard deviation of 1 is approximately 0.9802, or 98.02%. Here, he probability that z is between -2.33 and 2.33 for a standard normal distribution with a mean of 0 and a standard deviation of 1, you'll need to use a standard normal distribution table or a calculator with a built-in z-table function.

Step-by-step explanation:
Step:1. Identify the given values: Mean (µ) = 0, Standard Deviation (σ) = 1, and the range of z-scores is between -2.33 and 2.33.
Step:2. Use a standard normal distribution table or a calculator with a built-in z-table function to find the probabilities associated with z = -2.33 and z = 2.33.
Step:3. Look up the probability of z = -2.33 in the table, which should be approximately 0.0099.
Step:4. Look up the probability of z = 2.33 in the table, which should be approximately 0.9901.
Step:5. Subtract the probability for z = -2.33 from the probability for z = 2.33 to find the probability of z being between these two values: P(-2.33 < z < 2.33) = P(z = 2.33) - P(z = -2.33) = 0.9901 - 0.0099 = 0.9802
The probability that z is between -2.33 and 2.33 for a standard normal distribution with a mean of 0 and standard deviation of 1 is approximately 0.9802, or 98.02%.

Learn more about probability here, https://brainly.com/question/4079902

#SPJ11

The total surface area of the part of the cylinder that lies between the xy-plane and the plane is:

S = π[tex]r^2[/tex] + 2πr√[tex](r^2 + (c-a)^2)[/tex]

The answer has the form πr(r + a + √(r^2 + (c-a)^2)), where a is the distance from the xy-plane to the plane.

To find the surface area of the part of the cylinder that lies between the xy-plane and the plane, we first need to determine the equations of the cylinder and the plane. Let's assume that the cylinder has radius r and height h, and its center lies on the z-axis at point (0, 0, c). The equation of the cylinder can be written as:

[tex]x^2 + y^2 = r^2[/tex]

and the equation of the plane can be written as:

z = a, where a is the distance from the xy-plane to the plane.

To find the surface area of the part of the cylinder that lies between the xy-plane and the plane, we need to calculate the area of the circular base (which lies on the xy-plane) and the curved surface area (which lies between the plane and the base).

The area of the circular base is simply π[tex]r^2[/tex].

To calculate the curved surface area, we need to project the curved surface onto the xy-plane and find its length. We can do this by considering a right triangle with sides r (the radius of the cylinder) and c-a (the distance from the center of the cylinder to the plane). The length of the hypotenuse of the triangle is given by:

l = √[tex](r^2 + (c-a)^2)[/tex]

The projection of the curved surface onto the xy-plane is a circle with radius l. Therefore, the curved surface area is:

A = 2πrl

Substituting l and simplifying, we get:

A = 2πr√[tex](r^2 + (c-a)^2)[/tex]

Therefore, the total surface area of the part of the cylinder that lies between the xy-plane and the plane is:

S = πr^2 + 2πr√[tex](r^2 + (c-a)^2)[/tex]

The answer has the form πr(r + a + √[tex](r^2 + (c-a)^2)[/tex]), where a is the distance from the xy-plane to the plane.

To know more about equations of the cylinder refer here:

https://brainly.com/question/23695102

#SPJ11

To complete the table and find the derivative of the function y = (9x^(3/2))/x without using the quotient rule, we'll rewrite, differentiate, and simplify the function and get dy/dx =  27/2x^(1/2) - 9x^(1/2) .

Step 1: Rewrite the function
y = 9x^(3/2) * x^(-1) (multiply the x term in the denominator by -1 to rewrite the division as multiplication)
Step 2: Differentiate the function using the power rule (dy/dx = nx^(n-1))
dy/dx = 9(3/2)x^(3/2 - 1) - 9x^(3/2 - 1)
Step 3: Simplify the expression
dy/dx = 27/2x^(1/2) - 9x^(1/2)

Your answer: To find the derivative of the function y = (9x^(3/2))/x without using the quotient rule, we rewrote the function, differentiated it, and simplified the result to obtain the derivative dy/dx = 27/2x^(1/2) - 9x^(1/2).

Learn more about : Derivatives - https://brainly.com/question/31499644

#SPJ11

The mean of the total withdrawals in 8 hours is $2400 and the standard deviation is approximately $178.89.

To find the mean of the total withdrawals in 8 hours, we first need to find the mean of withdrawals per hour. Since the rate of customers arriving at the ATM is 10 per hour, we can assume that there are also 10 withdrawals per hour. Therefore, the mean of withdrawals per hour is 10 x $30 = $300.

To find the mean of total withdrawals in 8 hours, we can multiply the mean of withdrawals per hour by the number of hours: $300 x 8 = $2400.

To find the standard deviation of total withdrawals in 8 hours, we need to use the formula: standard deviation = square root of (variance x n), where variance is the square of standard deviation and n is the number of observations.

The variance of withdrawals per hour can be calculated as follows:

Variance = (standard deviation)^2 = $20^2 = $400

Therefore, the variance of total withdrawals in 8 hours is:

Variance = $400 x 8 = $3200

And the standard deviation of total withdrawals in 8 hours is:

Standard deviation = square root of ($3200 x 1) = $56.57

So, the mean of total withdrawals in 8 hours is $2400 and the standard deviation is $56.57.
Hello! I'd be happy to help you with this question. To find the mean and standard deviation of the total withdrawals in 8 hours, we'll first determine the expected number of customers and then use the given information about the mean and standard deviation of the withdrawals.

1. Determine the expected number of customers in 8 hours: Since customers arrive at a rate of 10 per hour, in 8 hours we can expect 10 * 8 = 80 customers.

2. Calculate the mean of total withdrawals: Multiply the mean withdrawal per transaction by the expected number of customers. The mean withdrawal is $30, so the mean of total withdrawals in 8 hours is 80 * $30 = $2400.

3. Calculate the variance of total withdrawals: Since the withdrawals are independent, we can multiply the variance of individual withdrawals by the expected number of customers. The variance is the square of the standard deviation, which is $20^2 = $400. The variance of total withdrawals in 8 hours is 80 * $400 = $32,000.

4. Calculate the standard deviation of total withdrawals: Take the square root of the variance. The standard deviation is √$32,000 ≈ $178.89.

Learn more about standard deviation here:

https://brainly.com/question/23907081

#SPJ11

The perimeter is 58.9

Here we have an isosceles triangle.

To find the length of the sides that aren't the base we can use a trigonometric equation.

sin(60°) = 4*√15/hypotenuse

hypotenuse = 4*√15/sin(60°) = 18.8

The side in the left also measures that.

Now we need the base, we can define the base as:

(b/2)² + (4√15)²  = 18.8²

b²/4 + 16*15 =  18.8²

b = √((18.8² - 16*15)*4)

b = 21.3

Then the perimeter is:

21.3 + 18.8 + 18.8 = 58.9

learn about triangles

https://brainly.com/question/2217700

#SPJ1

Answer:

54 square centimeters

Step-by-step explanation:

The area of a trapezium can be calculated by taking the average of the parallel sides and multiplying by the height. So, the area of this trapezium is:

(7 + 11) / 2 * 6 = 9 * 6 = 54 cm^2

Therefore, the area of the trapezium is 54 square centimeters.

Hope this helps!

Answer:

the area of the trapezium is 54 square centimeters.

Step-by-step explanation:

Given:

Parallel side 1 = 7cm

Parallel side 2 = 11cm

Height = 6cm

We can use the formula for the area of a trapezium, which is:

Area = (Sum of parallel sides / 2) × Height

Plugging in the values we have:

Area = ((7 + 11) / 2) × 6

Now, let's simplify the equation:

Area = (18 / 2) × 6

Area = 9 × 6

Area = 54

So, the area of the trapezium is 54 square centimeters.

To verify that a random 4x4 matrix A and its transpose AT have the same characteristic polynomial and eigenvalues, but not necessarily the same eigenvectors, follow these steps:

1. Construct a random 4x4 matrix A, such as:

A = | 1  2  3  4 |
     | 5  6  7  8 |
     | 9 10 11 12 |
     |13 14 15 16 |

2. Find the transpose of A (AT):

AT = | 1  5  9 13 |
        | 2  6 10 14 |
        | 3  7 11 15 |
        | 4  8 12 16 |

3. Compute the characteristic polynomial for A and AT.

4. Compare the eigenvalues obtained for A and AT. They should be the same with the same multiplicities.

5. Check the eigenvectors for A and AT. They may not be the same.

Repeat the same analysis for a random 5x5 matrix.

In summary, A and AT have the same characteristic polynomial and eigenvalues, but not necessarily the same eigenvectors. This holds true for both 4x4 and 5x5 matrices.

To know more about characteristic polynomial click on below link:

https://brainly.com/question/29610094#

#SPJ11

The average length of the queue (Lq) for an M/G/1 system with λ = 20, μ = 35, and σ = 0.005 is Lq = 0.3926 (option B).

To find the average length of the queue (Lq) in an M/G/1 system, we can use the Pollaczek-Khintchine formula:

Lq = (λ² * σ² + (λ/μ)²) / (2 * (1 - (λ/μ)))

Given λ = 20 (arrival rate), μ = 35 (service rate), and σ = 0.005 (standard deviation of service time):

1. Calculate λ/μ: 20/35 = 0.5714
2. Calculate 1 - (λ/μ): 1 - 0.5714 = 0.4286
3. Calculate λ² * σ²: (20²) * (0.005²) = 0.01
4. Calculate (λ/μ)²: (0.5714²) = 0.3265
5. Plug these values into the Pollaczek-Khintchine formula:

Lq = (0.01 + 0.3265) / (2 * 0.4286) = 0.3926 . (B)

To know more about standard deviation click on below link:

https://brainly.com/question/23907081#

#SPJ11

The statement "if a treatment is expected to decrease scores in a population with µ= 30, then the alternative hypothesis is µ ≤ 30." is true.

The alternative hypothesis (H1) represents a claim that contradicts the null hypothesis (H0). In this case, the null hypothesis would be that the treatment has no effect or increases scores, stated as µ≥30. The alternative hypothesis, µ≤30, suggests that the treatment is expected to decrease the population scores.

In hypothesis testing, we compare the observed data to these hypotheses to determine if there's enough evidence to support the claim made by the alternative hypothesis. By stating µ≤30, we are considering the possibility that the treatment may lead to a decrease in the population scores.

To know more about null hypothesis click on below link:

https://brainly.com/question/19263925#

#SPJ11

The required answer is 2y = x / (x + 2)

To find the equation of the slant asymptote for y = (x^2)/(2x + 2), we can perform long division or synthetic division to divide x^2 by 2x + 2. The result is y = (1/2)x - 1. Therefore, the equation of the slant asymptote is y = (1/2)x - 1.

The asymptotes most commonly encountered in the study of calculus are of curves of the form y = ƒ(x). These can be computed using limits and classified into horizontal, vertical and oblique asymptotes depending on their orientation. Horizontal asymptotes are horizontal lines that the graph of the function approaches as x tends to +∞ or −∞. As the name indicates they are parallel to the x-axis. Vertical asymptotes are vertical lines (perpendicular to the x-axis) near which the function grows without bound.

It seems there might be some typos in the given function. I believe you meant the function to be written as y = (x^2 + 2x) / 2y. To find the equation of the slant asymptote, follow these steps:

Step 1: Rewrite the given function with proper notation:
y = (x^2 + 2x) / (2y)

Step 2: Solve for x in terms of y:
2y = x^2 + 2x
2yx = x^2 + 2x

Step 3: Factor out x on the right side:
2yx = x(x + 2)

Step 4: Divide both sides by (x + 2):
2y = x / (x + 2)

This equation represents the slant asymptote of the given function.

To know more about asymptote. Click on the link.

https://brainly.com/question/17767511

#SPJ11

The inverse Laplace transform of 1/s(s^2 + 36) using the convolution theorem is (1/6)sin(6t) + (1/6)cos(6t).

First, we need to find the Laplace transform of the given function 1/s(s^2 + 36). We can use the table of Laplace transforms to find that L{1/s(s^2 + 36)} = (1/6)sin(6t).

Next, we need to find the Laplace transform of the function f(t) = cos(6t)u(t), where u(t) is the unit step function. Using the table of Laplace transforms, we find that L{cos(6t)u(t)} = (s)/(s^2 + 36).

Now, we can apply the convolution theorem, which states that the inverse Laplace transform of the product of two functions in the frequency domain is equal to the convolution of their inverse Laplace transforms in the time domain.

The convolution of (1/6)sin(6t) and (s)/(s^2 + 36) is given by the integral of (1/6)sin(6(t - τ)) * (s)/(s^2 + 36) dτ from 0 to t.

To solve the integral, we can use partial fraction decomposition. We can express (s)/(s^2 + 36) as (A/s) + (B(s)/(s^2 + 36)), where A and B are constants to be determined.

Solving for A and B, we get A = 1/6 and B(s) = -s/6.

Substituting A and B(s) back into the integral and evaluating the integral, we get (1/6)sin(6t) + (1/6)cos(6t).

Therefore, the inverse Laplace transform of 1/s(s^2 + 36) using the convolution theorem is (1/6)sin(6t) + (1/6)cos(6t).

For more questions like Integral click the link below:

https://brainly.com/question/18125359

#SPJ11

Yes, it is evidence that population means are different because it does not cover 0. Zinc lozenges appear to be effective in reducing the average number of days of symptoms.

(a) Calculate x1 − x2 difference in sample means.
x1 − x2 = 7.2 - 4.1 = 3.1 days

Compute the unpooled s.e.(x1 − x2) standard error of the difference in means. (Round your answer to four decimal places.)
s.e.(x1 − x2) = √((1.6^2 / 23) + (1.4^2 / 25)) = √(1.1133) = 1.0551 days

(b) Compute a 95% confidence interval for the difference in mean days of overall symptoms for the placebo and zinc lozenge treatments. Use the unpooled standard error and use the smaller of n1 − 1 and n2 − 1 as a conservative estimate of degrees of freedom. (Round the answers to two decimal places.)

Using the t-distribution table and the conservative degrees of freedom (22), the critical t-value is approximately 2.074.
CI = (x1 - x2) ± t * s.e.(x1 - x2)
CI = 3.1 ± 2.074 * 1.0551
CI = 3.1 ± 2.1886
CI = (0.91, 5.29) days

(c) Complete the following sentence interpreting the interval which was obtained in part (b).
With 95% confidence, we can say that in the population of cold sufferers represented by the sample, taking zinc lozenges would reduce the mean number of days of symptoms by somewhere between 0.91 and 5.29 days, compared with taking a placebo.

(d) Is the interval computed in part (b) evidence that the population means are different? Fill the blank in the following sentence.

To learn more about degrees visit;

brainly.com/question/364572

#SPJ11

The probability of getting between 3 and 5 successes (inclusive) in 8 trial is approximately 0.6309.

We can use the binomial probability formula to calculate the probability:

P(3 ≤ x ≤ 5) = P(x = 3) + P(x = 4) + P(x = 5)

where [tex]P(x) = (n choose x) * p^x * (1 - p)^{(n - x)}[/tex]

In this case, n = 8 and p = 0.62, so we have:

P(3 ≤ x ≤ 5) = [tex](8 choose 3) * 0.62^3 * (1 - 0.62)^(8 - 3) + (8 choose 4) * 0.62^4 * (1 - 0.62)^{(8 - 4)} + (8 choose 5) * 0.62^5 * (1 - 0.62)^{(8 - 5)}[/tex]

Using a calculator or software, we can compute this expression to get:

P(3 ≤ x ≤ 5) ≈ 0.6309

Therefore, the probability of getting between 3 and 5 successes (inclusive) in 8 trials with a success probability of 0.62 is approximately 0.6309.

Learn more about binomial probability

brainly.com/question/31197941

#SPJ11

Boundary conditions: u(0, t) = u0 , u(L, t) = u1

Initial condition: u(x, 0) = 0, for 0 ≤ x ≤ L

A function is a mathematical concept that describes a relationship between two sets of values, where each input value (also known as the argument) produces exactly one output value. It is often represented by a formula or an equation.

According to the given information:

The problem describes a one-dimensional heat conduction situation in which a rod of length L is placed on the x-axis, and its temperature distribution is being studied over time. The boundary conditions for the temperature function u(x,t) are given as:

The left end of the rod (x=0) is held at a temperature u0.

The right end of the rod (x=L) is held at a temperature u1.

The initial temperature of the rod is zero throughout its length (i.e., u(x,0) = 0 for all 0 ≤ x ≤ L).

To summarize:

Boundary conditions:

u(0, t) = u0

u(L, t) = u1

Initial condition:

u(x, 0) = 0, for 0 ≤ x ≤ L

To know more about Function visit :

https://brainly.com/question/12431044

#SPJ1

The critical value for a 90% confidence interval can be found using a Z-table or T-table, depending on the sample size and known information about the population.

The 90% confidence interval for µ, the mean score for all students in the school district who are enrolled in gifted and talented programs.

To calculate the 90% confidence interval for µ, the mean score for all students in the school district who are enrolled in gifted and talented programs, you'll need the sample mean, sample standard deviation, and sample size.
The formula for the 90% confidence interval is:
(sample mean) ± (critical value) * (sample standard deviation / √sample size)

The confidence interval is a range of values that is likely to contain the true population parameter (in this case, the mean score for all students in the district). The 90% confidence interval means that if we were to repeat this study multiple times, we would expect the true population means to fall within this range of values 90% of the time.

Without additional information about the sample size, standard deviation, and mean score, I cannot provide you with the exact calculation for the confidence interval. However, the interpretation of the confidence interval would be something like this: "Based on the sample of students in gifted and talented programs, we can be 90% confident that the true population mean score falls within the range of X to Y." This would provide valuable information for educators and administrators who want to assess the performance of gifted and talented students in their district.

Learn more about Sample:

brainly.com/question/12823688

#SPJ11

The average rate of change of the function between the given values of x. y = 6 3x 0.5x2 between x = 4 and x = 6 is 8

To find the average rate of change of the function y = 6 + 3x + 0.5x^2 between x = 4 and x = 6, we need to find the difference between the y-values at x = 6 and x = 4, and divide by the difference between the x-values.
When x = 4, y = 6 + 3(4) + 0.5(4)^2 = 22
When x = 6, y = 6 + 3(6) + 0.5(6)^2 = 36
The difference in y-values is 36 - 22 = 14.
The difference in x-values is 6 - 4 = 2.
Therefore, the average rate of change of the function between x = 4 and x = 6 is 14/2 = 7.
So, the average rate of change of the function is 7 units per 1 unit change in x between the given values of x.
To find the average rate of change of the function y = 6 + 3x + 0.5x^2 between x = 4 and x = 6, follow these steps:
1. Evaluate the function at x = 4 and x = 6:
y(4) = 6 + 3(4) + 0.5(4^2) = 6 + 12 + 8 = 26
y(6) = 6 + 3(6) + 0.5(6^2) = 6 + 18 + 18 = 42
2. Calculate the average rate of change:
Average rate of change = (y(6) - y(4)) / (6 - 4) = (42 - 26) / 2 = 16 / 2 = 8
So, the average rate of change of the function between x = 4 and x = 6 is 8.

To learn more about function, click here:

brainly.com/question/12431044

#SPJ11

Every odd composite integer is a pseudoprime to both the base 1 and the base -1.

A pseudoprime is a composite number that behaves like a prime number with respect to a particular base. In other words, a pseudoprime passes a primality test for a given base even though it is not actually prime.

Base 1:When we consider the base 1, any integer raised to the power of 1 is equal to the integer itself. Therefore, for any odd composite integer n, we have 1^(n-1) ≡ 1 (mod n) by Fermat's Little Theorem. This implies that n passes the primality test for base 1 and is a pseudoprime.

Base -1:When we consider the base -1, any integer raised to the power of an even number is always 1, and any integer raised to the power of an odd number is always -1. Therefore, for any odd composite integer n, we have (-1)^(n-1) ≡ -1 (mod n), as (n-1) is always an even number. This implies that n passes the primality test for base -1 and is a pseudoprime.

In conclusion, every odd composite integer is a pseudoprime to both the base 1 and the base -1, as it satisfies the conditions mentioned above.

For more questions like Integer click the link below:

https://brainly.com/question/490943

#SPJ11

Answer:

The shape formed is a quadrilateral.

Step-by-step explanation:

The four points A(-1,0), B(0,2), C(4,0), and D(3,-2) can be used to form a quadrilateral. To identify the shape formed by these points, we can use the distance formula to find the length of each side of the quadrilateral, and then compare the side lengths.

AB: Distance between A(-1,0) and B(0,2)

= sqrt((0 - (-1))^2 + (2 - 0)^2)

= sqrt(1 + 4)

= sqrt(5)

BC: Distance between B(0,2) and C(4,0)

= sqrt((4 - 0)^2 + (0 - 2)^2)

= sqrt(16 + 4)

= sqrt(20)

= 2 sqrt(5)

CD: Distance between C(4,0) and D(3,-2)

= sqrt((3 - 4)^2 + (-2 - 0)^2)

= sqrt(1 + 4)

= sqrt(5)

DA: Distance between D(3,-2) and A(-1,0)

= sqrt((-1 - 3)^2 + (0 - (-2))^2)

= sqrt(16 + 4)

= 2 sqrt(5)

Since the length of AB is not equal to the length of CD, and the length of BC is not equal to the length of DA, we can conclude that the quadrilateral formed by these four points is not a parallelogram or a rhombus. Additionally, since the length of AB is not equal to the length of CD, we can conclude that the quadrilateral is not a kite.

By comparing the angles formed by the line segments AB, BC, CD, and DA, we can see that the angle at B is a right angle, while the other three angles are all acute angles. This indicates that the quadrilateral is a trapezoid. Specifically, it is a right trapezoid, since it has one right angle.

Answer:

∠ A = 60° , ∠ B = 30°

Step-by-step explanation:

using the cosine ratio in the right triangle

cosA = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{AC}{AB}[/tex] = [tex]\frac{7}{14}[/tex] = [tex]\frac{1}{2}[/tex] , then

∠ A = [tex]cos^{-1}[/tex] ( [tex]\frac{1}{2}[/tex] ) = 60°

the sum of the 3 angles in Δ ABC = 180°

∠ A + ∠ B + ∠ C = 180°

60° + ∠ B + 90° = 180°

∠ B + 150° = 180° ( subtract 150° from both sides )

∠ B = 30°

In a right-skewed distribution, the correct answer is b. the median is less than the mean. In a right-skewed distribution, the data has a longer tail on the right side, indicating that there are more values greater than the mean. This causes the mean to be greater than the median.

Get to know more https://brainly.com/question/30054635

#SPJ11

Answer:

  d = 8 mm

Step-by-step explanation:

You want the length of the other diagonal of a rhombus when one of them has length 35 mm and the area of the rhombus is 140 mm².

The area of a rhombus is half the product of the lengths of the diagonals:

  A = 1/2(d1)(d2)

  140 mm² = 1/2(35 mm)(d)

  (280 mm²)/(35 mm) = d = 8 mm

The length of the missing diagonal is 8 mm.

The maximum amount of funds that Entrepreneur Bill should raise typically depends on various factors such as the growth potential of the business, the market demand, and the financial needs of the company.

However, a general rule of thumb is that entrepreneurs should not raise more than 25% to 30% of the company's worth in a single fundraising round.

So, if his company is worth $15 million, the maximum amount of funds that Entrepreneur Bill should raise is around $3.75 million. This will help him maintain a fair ownership stake in the company while also ensuring that he has enough funds to achieve his business goals.

It is important to note that this is just a rough estimate and every business is unique. Entrepreneur Bill should seek the advice of experienced investors or financial advisors to determine the appropriate amount of funds to raise for his specific business needs.

To know more about financial advisors click on below link:

https://brainly.com/question/29767702#

#SPJ11

Answer: Right triangle

Step-by-step explanation:

Every right triangle has a 90 degree square that can fit in it.

:)

Acute triangles measure less than 90 degrees while obtuse goes over 90 degrees.  

According to the information, we can express the vector w as a linear combination of v1, v2, and v3 like this: w = -v1 - 5v2 - 3v3

We can express the vector w as a linear combination of v1, v2, and v3. Let's say:

w = c1 v1 + c2 v2 + c3 v3

We can find the values of c1, c2, and c3 using the dot product properties of orthogonal vectors. Since v1, v2, and v3 are orthogonal:

w ⋅ v1 = (c1 v1 + c2 v2 + c3 v3) ⋅ v1 = c1 (v1 ⋅ v1) = 6c1

w ⋅ v2 = (c1 v1 + c2 v2 + c3 v3) ⋅ v2 = c2 (v2 ⋅ v2) = 18c2

w ⋅ v3 = (c1 v1 + c2 v2 + c3 v3) ⋅ v3 = c3 (v3 ⋅ v3) = 25c3

Using the given values, we can set up a system of equations:

-6 = 6c1 + 0c2 + 0c3

-90 = 0c1 + 18c2 + 0c3

-75 = 0c1 + 0c2 + 25c3

Solving for c1, c2, and c3, we get:

c1 = -1

c2 = -5

c3 = -3

Therefore, we have:

w = -v1 - 5v2 - 3v3

Note: The solution is not unique, as any linear combination of v1, v2, and v3 that satisfies the given dot product conditions would work.

Learn more about vectors in: https://brainly.com/question/13322477

#SPJ1