find the area of this triangle

1- True: Linear programming can be used to identify the critical path for a PERT network.

2- False: The probabilistic approach characterized by PERT does not use median activity times.

3- False: The critical path is the sequential path of activities from the first to the last, defined by activities with zero slack.

4- False: Linear programming can be used for both profit and nonprofit organizations.

Linear programming can indeed be used to identify the critical path for a PERT network. The critical path represents the sequential path of activities from the first activity to the last, and it is defined by activities with zero slack. By analyzing the dependencies and constraints between activities, linear programming techniques can be applied to determine the optimal schedule and identify the critical path.

The probabilistic approach characterised by PERT does not use median activity times. Instead, it utilises three time estimates for each activity: optimistic, most likely, and pessimistic activity times. These estimates are used to calculate the expected duration and variability of the project.

Regarding the statement about linear programming and profit optimization, it is incorrect to say that linear programming cannot be used for nonprofit organizations. Linear programming can be applied to various optimisation problems, including those related to resource allocation, cost minimisation, and efficiency improvement, which are relevant to both for-profit and nonprofit organisations.

Learn more about linear programming here, https://brainly.com/question/14309521

#SPJ11

Answer:

c is your answer

Step-by-step explanation:

Answer:

3 cm

Step-by-step explanation:

Answer:

tangent x = 12/9

Step-by-step explanation:

Hello There!

Once again these are the Trigonometric Ratios

SOH CAH TOA

Sine = Opposite over Hypotenuse (SOH)

Cosine = Adjacent over Hypotenuse (CAH)

Tan = Opposite over Adjacent (TOA)

And for this one we are asked to find the tangent of angle x

Remember tangent = opposite over adjacent

opposite - the side length that is opposite of the angle (so the angle will be facing that side length)

adjacent - the side length that is not the opposite nor the hypotenuse

The opposite of angle x is 12 and the adjacent of angle x is 9

so tangent x = 12/9

Answer:

i think the answer is 119943147893471987 yes its as easy as 1+1

Step-by-step explanation:

Answer: y=-2x-3

Step-by-step explanation:

Answer:

X=-11/6

Steps

f(x)=6x+11

simplify,

0=6x+11

-6x+11

Divide both sides,

Answer is x = -¹¹/6

Answer:

three thirds is one whole

Step-by-step explanation:

The answer is 18 because three thirds is one whole which in this case is 18! Have a nice day!

Answer: Figure B is 2x bigger on all sides

Explanation: You can see that each of the numbers times 2 would equal all of the numbers on B.

Answer:

each rope should be 1 1/7 yard long

Step-by-step explanation:

9 1/7 ÷8

1 1/7

Answer:

8/7 yd per piece

Step-by-step explanation:

To answer this, divide the total rope length 9 1/7 yd by 8 pieces:

 64 yd

------------------ = 8/7 yd per piece

7(8 pieces)

Check:  does 8 times (8/7 yd/piece) come out to 64/7 yd, or 9 1/7 yd?  YES

The command "-index (F5:F277, rand between (1.273))" when entered in the spreadsheet with survey responses that we use for Project 2 (and will use for Project 3) would pick a response at random from the responses to the question.

So, the correct option is: Pick a response at random from the responses to the question "Pineapple on pizza."

The INDEX function is an Excel worksheet function that finds the value or reference to a value within an array. It returns a reference to the location of the value, rather than the value itself. The INDEX function in Excel is a lookup and reference function.

The INDEX function allows you to search a spreadsheet and find the value contained in a given cell. The INDEX function takes two arguments, the array and the index number. The array is the range of cells that you want to search, while the index number is the position of the value you want to return.

To know more about function refer to:

https://brainly.com/question/11624077

#SPJ11

Answer:

Your answer will be x= -1

Step-by-step explanation:

have a nice day:)

y = mx+b

(5-8)/(9-0) = -1/3 which is m

solve point slope to find slope intercept by using one of the points (0,8)

y-y1=m(x-x1)

y-8 = -1/3(x-0)

y-8 = -1/3x

Answer: y = -1/3x + 8

Answer:

q = -10

Step-by-step explanation:

If the slope is undefined, then there is no change in x. Therefore, since -10-(-10) = 0, then q=-10.

Answer:

it's radius is 9 and diameter is 18

Answer:

diameter=18cm

radius =diameter/2=18/2=9cm

(a) The unit vector normal to the surface at point P is n = (-2/3, -2/3, 1/3).

(b) The gradient vector ∇f = (-2x, -2y, 0.5z).

(c) The curl of the gradient vector, ∇ × ∇f, is not applicable in this case since ∇f is not a vector field, but a surface normal.

To find a unit vector normal to the surface at point P(1, 1, 2) given the equation 0.25z² - x² - y² = 0, we can follow these steps:

Step 1: Define the Surface Function

Let's define the surface function f(x, y, z) based on the given equation:

f(x, y, z) = 0.25z² - x² - y²

Step 2: Calculate the Gradient Vector (∇f)

The gradient vector (∇f) represents the vector of partial derivatives of the surface function. Calculate ∇f(x, y, z) by taking the partial derivatives of f(x, y, z) with respect to each variable:

∂f/∂x = -2x

∂f/∂y = -2y

∂f/∂z = 0.5z

Thus, the gradient vector (∇f) is (∇f) = (-2x, -2y, 0.5z).

Step 3: Evaluate ∇f at Point P

Evaluate the gradient vector (∇f) at point P(1, 1, 2) by substituting the coordinates into (∇f):

∇f(P) = (-2(1), -2(1), 0.5(2))

= (-2, -2, 1)

Step 4: Normalize the Normal Vector

To obtain a unit vector normal to the surface at point P, we need to normalize (∇f(P)) by dividing it by its magnitude.

Magnitude of ∇f(P) = √((-2)² + (-2)² + 1²)

= √(4 + 4 + 1)

= √9

= 3

The unit vector normal to the surface at point P is then:

n = (∇f(P)) / |∇f(P)|

= (-2, -2, 1) / 3

= (-2/3, -2/3, 1/3)

So, the unit vector normal to the surface at point P(1, 1, 2) is n = (-2/3, -2/3, 1/3).

Learn more about the unit vector normal at

https://brainly.com/question/29752499

#SPJ4

The question is -

Find a unit vector normal to the surface at Point P: (1,1,2):

0.25z² - x² - y² = 0

(a) n = ?

(b) ∇f = ?

(c) ∇ × ∇f = ?

The number of ways in which 52 cards can be distributed such that Sara receives 17 cards, Jacob receives 17 cards, and their mother receives 18 cards is given by the following expression:52!/17!17!18!

Explanation: The number of ways to distribute k objects among n persons in which the order does not matter and each person receives at least one object is given by the following expression: ((k - n) choose (n - 1)). This can be extended to the case where each person is required to receive a specific number of objects. For example, if we have k objects and want to distribute them to persons A, B, and C such that A receives a objects, B receives b objects, and C receives c objects, where a + b + c = k, then the number of ways to do this is given by the expression: ((k - a - b - c) choose (2))This can be simplified as follows: ((k - a - b - c)!)/((2!)(k - a - b - c - 2)!)), which can be further simplified as follows: (k - a - b - c)(k - a - b - c - 1)/2!.

Therefore, the number of ways in which 52 cards can be distributed such that Sara receives 17 cards, Jacob receives 17 cards, and their mother receives 18 cards is given by: ((52 - 17 - 17 - 18) choose (2))= ((52 - 52) choose (2))= (0 choose 2)=0. Therefore, the required number of ways is 52!/17!17!18!.

To know more about Combination, click here:

https://brainly.com/question/20211959

#SPJ11

Answer:

Wouldn't the answer be C) Positive Integers?

Step-by-step explanation: Because the complement of a set include all of the elements not included in the indicated set. I hope I'm making some sense. :)

To show that the function f(x) = x³ for x < 0 and f(x) = x²sin(x) for x > 0 is differentiable, we need to demonstrate that the function has a derivative at every point in its domain.

Let's consider the function f(x) separately for x < 0 and x > 0.

For x < 0

In this case, f(x) = x³. The power rule tells us that the derivative of xⁿ with respect to x is nxⁿ⁻¹. Applying this rule, we find that the derivative of f(x) = x³ is f'(x) = 3x².

For x > 0

In this case, f(x) = x²sin(x). The product rule is used when we have a function that is the product of two other functions. The derivative of f(x) can be calculated as follows

f'(x) = (x²)' sin(x) + x² (sin(x))'

To find the derivative of x² sin(x), we use the product rule again

(f(x)g(x))' = f'(x)g(x) + f(x)g'(x)

Let f(x) = x² and g(x) = sin(x). We have

f'(x) = 2x

g'(x) = cos(x)

Substituting these values back into the product rule equation

f'(x) = (x²)' sin(x) + x² (sin(x))'

= (2x) sin(x) + x^2 cos(x)

Therefore, the derivative of f(x) = x²sin(x) is f'(x) = (2x) sin(x) + x²cos(x).

Now, we have found the derivatives of f(x) for both x < 0 and x > 0. To show that f(x) is differentiable, we need to verify that the derivatives from both cases match at x = 0.

As x approaches 0 from the left side (x < 0), we have

lim(x → 0⁻) f'(x) = lim(x → 0⁻) 3x² = 0

As x approaches 0 from the right side (x > 0), we have

lim(x → 0⁺) f'(x) = lim(x → 0⁺) (2x) sin(x) + x²cos(x) = 0

Since the limits of the derivatives from both cases are equal at x = 0, we can conclude that f(x) = x³ for x < 0 and f(x) = x²sin(x) for x > 0 is differentiable at every point in its domain.

To know more about function here

https://brainly.com/question/30721594

#SPJ4

Answer:

Mrs. Habib will have 22.25 feet of border left after she puts border around the board.

Step-by-step explanation:

You must find the perimeter of the board and subtract it from the amount of border she has to find how much she will have left after she uses it. The formula for perimeter is [tex]P=2(l+w)[/tex], where [tex]l=[/tex] the length of the board, and [tex]w=[/tex] the width of the board. You will add those together and multiply them by 2 because there are 4 sides to a rectangle. That means this equation will look like:

[tex]P=2(8.25+3.75)[/tex]

Now you can just solve for the perimeter.

[tex]P=2(12)[/tex]

[tex]P=24[/tex]

The perimeter is 24 feet. That means it will take 24 feet of border to cover her board. In order to find out how much she'll have left over, just subtract 24 from the total amount of border she has.

[tex]46.25-24=22.25[/tex]

Therefore Mrs. Habib will have 22.25 feet of border left over after she covers the bulletin board.

The partial sum of the given sequence, -2 + (-6) + (-18) + ... + (-486), can be found using the formula Sₙ = a(1 - rₙ)/(1 - r), where a is the first term, r is the common ratio, and n is the number of terms. The value of the partial sum is 728.

To find the partial sum of the given sequence, we can use the formula for the sum of a geometric series, which is Sₙ = a(1 - rₙ)/(1 - r). In this case, the first term a is -2, and the common ratio r is -3. We need to determine the number of terms, n.

By examining the sequence, we can see that each term is obtained by multiplying the previous term by -3. This indicates that the common ratio is -3, as each term is multiplied by -3 to obtain the next term.

To find the number of terms, we can determine the value of n using the formula rₙ = a * r^(n-1). In this case, we have -486 = -2 * (-3)^(n-1).

By solving this equation, we find n = 6.

Substituting the values into the formula for the partial sum, we have:

S₆ = -2(1 - (-3)^6)/(1 - (-3)),

= -2(1 - 729)/(1 + 3),

= -2(-728)/4,

= 728.

Therefore, the partial sum of the given sequence is 728.

Learn more about sequence here:

https://brainly.com/question/30262438

#SPJ11

Answer:

16

Step-by-step explanation:

If each game is $1.50 we would divide the 24 by 1.50, or multiple 1.50 to find 24. So 24 divided by 1.50 is 16.

So she could play 16 games.

is there any instructions above the circle?

Answer: 1.785

Step-by-step explanation:

Answer:

Step-by-step explanation:

To determine the radius of a circle given its area, we can use the formula:

Area = π * radius^2

Given that the area is 10, we can set up the equation as follows:

10 = π * radius^2

To solve for the radius, we need to isolate it on one side of the equation. Dividing both sides by π, we get:

10 / π = radius^2

To find the radius, we can take the square root of both sides of the equation:

radius = √(10 / π)

Using a calculator to approximate the value of π as 3.14159, we can calculate:

radius ≈ √(10 / 3.14159)

radius ≈ √(3.1831)

radius ≈ 1.7849

Therefore, the radius of the circle is approximately 1.7849 when the area is 10.

hope it helps!!

Answer:A and b

Step-by-step explanation:

The dimensions of cylinders that have a volume under 220 cubic inches per serving are:

3-inch radius and 4-inch height
4-inch diameter and 4-inch height
4-inch diameter and 9-inch height

Volume is defined as the mass of the object per unit density while for geometry it is calculated as profile area multiplied by the length at which that profile is extruded.

Here,
We can use the formula V = πr²h to find the volume of each cylinder.

For a cylinder with a 3-inch radius and 4-inch height:

V = π(3)²(4) ≈ 113.1 cubic inches

For a cylinder with a 4-inch radius and 4-inch height:

V = π(4)²(4) ≈ 200.96 cubic inches

For a cylinder with a 9-inch radius and 9-inch height:

V = π(9)²(9) ≈ 2289.0 cubic inches

For a cylinder with a 4-inch diameter and 9-inch height (radius is 2 inches):

V = π(2)²(9) ≈ 113.04 cubic inches

For a cylinder with a 6-inch diameter and 9-inch height (radius is 3 inches):

V = π(3)²(9) ≈ 254.5 cubic inches

For a cylinder with a 9-inch diameter and 4-inch height (radius is 4.5 inches):

V = π(4.5)²(4) ≈ 254.5 cubic inches

Therefore, the dimensions of cylinders that have a volume under 220 cubic inches per serving are:

3-inch radius and 4-inch height
4-inch diameter and 4-inch height
4-inch diameter and 9-inch height

Learn more about Volume here:
https://brainly.com/question/1578538

#SPJ3

The more accurate forward finite divided difference estimates for the derivatives are

f₁'(x₁) = 0

f₂'(x₂) = 0

f₃'(x₃) = 0

To make it easier to work with, let's rearrange the equations in terms of the variables:

4x₁ + 2x₂ + x₃ = 1

2x₁ + x₂ + x₃ = 4

2x₁ + 2x₂ + x₃ = 3

The truncated formula for estimating the derivative using the forward finite divided difference is given by:

f'(x) ≈ (f(x + ht) - f(x)) / ht

Here, f(x) represents the function we want to differentiate, and ht is the step size.

Let's calculate the derivatives using the truncated formula for the given equations:

For x₁:

f₁'(x₁) ≈ (f₁(x₁ + ht) - f₁(x₁)) / ht

= (4(x₁ + ht) + 2x₂ + x₃ - 4x₁ - 2x₂ - x₃) / ht

= (4x₁ + 4ht + 2x₂ + x₃ - 4x₁ - 2x₂ - x₃) / ht

= (4ht) / ht

= 4

Similarly, we can calculate the derivatives for x₂ and x₃.

For x₂:

f₂'(x₂) ≈ (f₂(x₂ + ht) - f₂(x₂)) / ht

= (2x₁ + (x₂ + ht) + x₃ - 2x₁ - x₂ - x₃) / ht

= (x₂ + ht - x₂) / ht

= ht / ht

= 1

For x₃:

f₃'(x₃) ≈ (f₃(x₃ + ht) - f₃(x₃)) / ht

= (2x₁ + 2x₂ + (x₃ + ht) - 2x₁ - 2x₂ - x₃) / ht

= (x₃ + ht - x₃) / ht

= ht / ht

= 1

So, the truncated forward finite divided difference estimates for the derivatives are:

f₁'(x₁) = 4

f₂'(x₂) = 1

f₃'(x₃) = 1

The more accurate formula for estimating the derivative using the forward finite divided difference is given by:

f'(x) ≈ (-3f(x) + 4f(x + ht) - f(x + 2ht)) / (2ht)

Let's calculate the derivatives using the more accurate formula for the given equations:

For x₁:

f₁'(x₁) ≈ (-3f₁(x₁) + 4f₁(x₁ + ht) - f₁(x₁ + 2ht)) / (2ht)

= (-3(4x₁ + 2x₂ + x₃) + 4(4(x₁ + ht) + 2x₂ + x₃) - (4(x₁ + 2ht) + 2x₂ + x₃)) / (2ht)

= (-12x₁ - 6x₂ - 3x₃ + 16x₁ + 8ht + 4x₂ + 2x₃ - 4x₁ - 8ht - 2x₂ - x₃) / (2ht)

= (-12x₁ + 16x₁ - 4x₁ + 8ht - 8ht) / (2ht)

= 0

Similarly, we can calculate the derivatives for x₂ and x₃.

For x₂:

f₂'(x₂) ≈ (-3f₂(x₂) + 4f₂(x₂ + ht) - f₂(x₂ + 2ht)) / (2ht)

= (-3(2x₁ + x₂ + x₃) + 4(2x₁ + (x₂ + ht) + x₃) - (2x₁ + (x₂ + 2ht) + x₃)) / (2ht)

= (-6x₁ - 3x₂ - 3x₃ + 8x₁ + 4x₂ + 4ht + 4x₃ - 2x₁ - x₂ - x₃) / (2ht)

= (-6x₁ + 8x₁ - 2x₁ - 3x₂ + 4x₂ - x₂ - 3x₃ + 4x₃ - x₃ + 4ht) / (2ht)

= 0

For x₃:

f₃'(x₃) ≈ (-3f₃(x₃) + 4f₃(x₃ + ht) - f₃(x₃ + 2ht)) / (2ht)

= (-3(2x₁ + 2x₂ + x₃) + 4(2x₁ + 2x₂ + (x₃ + ht)) - (2x₁ + 2x₂ + (x₃ + 2ht))) / (2ht)

= (-6x₁ - 6x₂ - 3x₃ + 8x₁ + 8x₂ + 4x₃ + 4ht - 2x₁ - 2x₂ - x₃) / (2ht)

= (-6x₁ + 8x₁ - 2x₁ - 6x₂ + 8x₂ - 2x₂ - 3x₃ + 4x₃ - x₃ + 4ht) / (2ht)

= 0

To know more about derivative here

https://brainly.com/question/30074964

#SPJ4

Answer:

Maybe multiply 2 and 4 then multiply 5x  of product of 2 and 4  

Step-by-step explanation:

1. Unit root tests are used to determine whether a time series variable is stationary or contains a unit root. Stationarity is a property of a time series where its statistical properties (such as mean, variance, and autocovariance) remain constant over time.

Unit root tests are important because many econometric models and statistical techniques assume stationarity. If a variable is non-stationary, it can lead to spurious regression.  

Unit root tests help identify such cases by testing the null hypothesis of a unit root presence in the time series.

2. Autocorrelation refers to the correlation between the observations of a time series with their lagged values. It indicates the presence of a systematic relationship or dependence between the current observation and past observations.

The Durbin-Watson test is a statistical test used to detect autocorrelation in the residuals of a regression model.

The Durbin-Watson test statistic ranges from 0 to 4. A value close to 2 indicates no significant autocorrelation, while values significantly below 2 suggest positive autocorrelation, and values significantly above 2 suggest negative autocorrelation.

3. VAR models represent a system of equations where each variable is regressed on its own lagged values and the lagged values of all other variables in the system.

VAR models are widely used for forecasting, impulse response analysis, and studying dynamic relationships in macroeconomic and financial data.

VEC models, on the other hand, are a special case of VAR models designed to capture long-run equilibrium relationships among variables. VEC models incorporate error correction terms that help adjust for any deviations from the long-run equilibrium.

They are particularly useful when studying variables that exhibit cointegration, as they allow for the analysis of both short-run dynamics and long-run equilibrium relationships.

4. The Autoregressive Distributed Lag (ARDL) model is a regression model commonly used when dealing with time series data that may have a mix of stationary and non-stationary variables.

The ARDL model finds applications in macroeconomics, finance, and other fields where the relationship between variables may exhibit mixed order of integration.

5. Cointegration refers to the long-run equilibrium relationship between non-stationary time series variables. Cointegration implies that a linear combination of the variables is stationary, indicating a stable relationship.

6. Heteroskedasticity refers to the condition where the variance of the error term in a regression model is not constant across all levels of the independent variables. This violates the assumption of homoscedasticity, which assumes constant variance.

To detect heteroskedasticity, several methods can be used:

a) Graphical Analysis: Plotting the residuals against the predicted values or the independent variables to visually examine patterns of heteroskedasticity.

b) White's Test: A statistical test that regresses the squared residuals on the independent variables to test for heteroskedasticity.

Heteroskedasticity has consequences for Ordinary Least Squares (OLS) estimation:

a) OLS estimates of coefficients remain unbiased, but they are no longer efficient (standard errors are incorrect).

b) The t-tests and F-tests become invalid, leading to incorrect inference.

c) Confidence intervals and hypothesis tests may be distorted.

Correcting for heteroskedasticity can be done using robust standard errors or weighted least squares (WLS) estimation, which takes into account the heteroskedasticity structure of the error terms.

To know more about Unit root tests refer here:

https://brainly.com/question/31260248#

#SPJ11

Let f, g and h be the functions from the set of integers to the set of integers defined by f(x) = 2x +3, g(x) = 3x + 2 and h(x) = x3 +1.

(a) To find (f º g)(x), we substitute g(x) into f(x) as follows:

  (f º g)(x) = f(g(x)) = f(3x + 2) = 2(3x + 2) + 3 = 6x + 4 + 3 = 6x + 9.

(b) To find (g º f)(x), we substitute f(x) into g(x) as follows:

  (g º f)(x) = g(f(x)) = g(2x + 3) = 3(2x + 3) + 2 = 6x + 9 + 2 = 6x + 11.

(c) To find the inverse of f(x), denoted as l'ind (f)(x), we solve for x in terms of f(x):

  x = (f(x) - 3) / 2.

  Rearranging the equation, we get f^(-1)(x) = 1/2x - 3/2.

(d) To find (h + h)(x), we add h(x) to itself:

  (h + h)(x) = h(x) + h(x) = ([tex]x^3[/tex] + 1) + (x^3 + 1) = 2[tex]x^3[/tex] + 2.

(e) To find the inverse of h(x), denoted as h^(-1)(x), we solve for x in terms of h(x):

  x = (h(x) - 1)^(1/3).

  Rearranging the equation, we get h^(-1)(x) = (x - 1)^(1/3).

Learn more about integers here:

https://brainly.com/question/490943

#SPJ11

Answer:16

Step-by-step explanation: