The mass of the nucleus with a radius of 2.8 x 10^-15 m is about 2.1 x 10^-27 kg or approximately 1.26 u.
To estimate the mass of a nucleus with a radius of 2.8 x 10^-15 m, we can use the following steps:
1. Determine the volume of the nucleus, assuming it's a sphere: V = (4/3)πr^3
2. Use the nuclear density to find the mass: ρ = mass/volume
3. Convert the mass to atomic mass units (u)
Nuclear density (ρ) is approximately constant at 2.3 x 10^17 kg/m^3.
Step 1: Calculate the volume of the nucleus:
V = (4/3)π(2.8 x 10^-15 m)^3 ≈ 9.15 x 10^-45 m^3
Step 2: Calculate the mass of the nucleus:
mass = ρ * V ≈ (2.3 x 10^17 kg/m^3)(9.15 x 10^-45 m^3) ≈ 2.1 x 10^-27 kg
Step 3: Convert the mass to atomic mass units (u):
mass (u) = mass (kg) / (1 u) ≈ (2.1 x 10^-27 kg) / (1.6605 x 10^-27 kg/u) ≈ 1.26 u
The mass of the nucleus with a radius of 2.8 x 10^-15 m is about 2.1 x 10^-27 kg or approximately 1.26 u.
Learn more about nuclear density here: https://brainly.com/question/13180243
#SPJ11
A 100 g particle experiences the one-dimensional.Suppose the particle is shot toward the right from x = 1.0 m with a speed of 22 m/s . Where is the particle's turning point? Express your answer with the appropriate units.
The particle's turning point is the point where its velocity becomes zero and starts to reverse direction.
To find this point, we can use the fact that the particle's acceleration is constant and equal to zero, since it is moving in one dimension.
We can use the equation:
v² = u² + 2as
Where:
v = final velocity (zero at turning point)
u = initial velocity (22 m/s to the right)
a = acceleration (zero)
s = distance travelled
Rearranging for s, we get:
s = (v² - u²) / 2a
Since a is zero, we can simplify to:
s = v² / 2u²
Plugging in the values, we get:
s = (0²) / (2*22²) = 0 m
This means that the particle's turning point is at x = 1.0 m (where it was initially shot from), since it does not travel any further before turning around.
Learn more about "acceleration " at: https://brainly.com/question/3046924
#SPJ11
Rutherford found the diameter of a gold nucleus to be about 10
−
15
m
.
Since gold is fairly massive, this implies a very high nuclear density. Find the density of a gold nucleus, in kilograms per cubic meter
The density of a gold nucleus can be found by dividing the mass of the gold nucleus by its volume. The volume of a sphere with diameter 10) m is: [tex]V = (4/3)πr^3\\ = (4/3)π(5×10^(-16))^3 = 5.24×10^(-45) m^3[/tex]
where r is the radius of the gold nucleus.
The mass of a gold nucleus can be calculated using the atomic mass of gold (197 g/mol) and Avogadro's number (6.022×10[tex]^23[/tex] mol^(-1)):
Converting this to kilograms, we get:
m = 3.27×10[tex]^(-28) kg[/tex]
The density of a gold nucleus is extremely high, which is expected given its tiny size and large mass.
To know more about curvature here
https://brainly.com/question/30106462
#SPJ4
if a particle's kinetic energy is equal to 1.15 times its rest energy, find its velocity.
The velocity of the particle is 0.885 times the speed of light if its kinetic energy is 1.15 times its rest energy.
The kinetic energy (K) of a particle can be expressed in terms of its rest energy (E₀) as:
K = (γ - 1) × E₀
where γ is the Lorentz factor, given by:
[tex]\gamma = 1 / \sqrt{1 - v^2/c^2}[/tex]
where v is the velocity of the particle and c is the speed of light.
We are given that K = 1.15 × E_0, so we can write:
1.15 × E₀ = (γ - 1) × E₀
Simplifying, we get:
γ - 1 = 1.15
γ = 2.15
Now we can solve for v:
[tex]2.15 = 1 / \sqrt{1 - v^2/c^2}[/tex]
Squaring both sides and rearranging, we get:
[tex]v^2/c^2 = 1 - 1/\gamma^2[/tex]
[tex]v^2/c^2 = 1 - 1/2.15^2[/tex]
[tex]v^2/c^2 = 0.7836[/tex]
[tex]v = c \times \sqrt{0.7836}[/tex]
v = 0.885c
Therefore, the velocity of the particle is 0.885 times the speed of light.
Learn more about Lorentz factor:
https://brainly.com/question/24568887
#SPJ11
17. Mars has two moons. If Earth had a second moon that was three times the mass of our
Moon and the same distance away, how would the second moon's gravitational force
compare with that of our Moon?
The gravitational pull of the second moon would be stronger than that of our moon, but it wouldn't be three times stronger because the gravitational pull is also influenced by the separation between the two bodies.
It would pull in more gravitationally than our moon if Earth had a second moon that was three times as large as our own and positioned similarly to the earth. An object's mass and distance from another object both affect gravity.
The gravitational attraction of the second moon would be stronger since it would be heavier than the first. The second moon would have a larger gravitational pull since it would be heavier than the first. The strength of the gravitational force is also affected by distance.
Learn more about gravitational pull:
https://brainly.com/question/25830163
#SPJ4
A water heater is rated at 200 W (200 Joules/sec). How long will the heater take to provide 60,000 joules to heat up a sample of water? A.0.3 minutes B. 30 minutes C.4.3 minutes D.5.0 minutes
The water heater which is rated at 200 W, will take 5.0 minutes to provide 60,000 joules. The correct answer is option D.
To solve this problem, we can use the formula:
Time (t) = Total energy (E) / Power (P)
We have been given:
Power (P) = 200 W (200 Joules/sec)
Total energy (E) = 60,000 Joules
1: Substitute the given values into the formula:
t = 60,000 Joules / 200 Joules/sec
2: Calculate the time in seconds:
t = 300 seconds
3: Convert the time to minutes:
t = 300 seconds ÷ 60 seconds/minute = 5 minutes
So, the water heater will take 5.0 minutes to provide 60,000 Joules to heat up the sample of water. The correct answer is D. 5.0 minutes.
Learn more about power:
https://brainly.com/question/11569624
#SPJ11
Two moles of helium gas initially at 181 K
and 0.27 atm are compressed isothermally to
1.39 atm.
Find the final volume of the gas. Assume
that helium behaves as an ideal gas. The
universal gas constant is 8.31451 J/K · mol.
Answer in units of m3
Find the work done by the gas.
Answer in units of kJ.
Find the thermal energy transferred.
Answer in units of kJ.
Answer:
I'm sorry I don't know an exact answer but try to use this, good luck!
Explanation:
Ideal gas law: P2*V2 = n*R*T
What is the period of a comet if its average orbital radius is 4 AU?
The period of the comet with an average orbital radius of 4 AU is approximately [tex]8 AU^{3/2}[/tex].
The period of a comet is the time it takes for the comet to complete one orbit around the Sun. To calculate the period of a comet, we can use Kepler's Third Law, which states that the square of a planet's orbital period is proportional to the cube of its average orbital radius.
So, if the average orbital radius of a comet is 4 AU, we can use the following formula:
[tex]Period^2 = (Average Orbital Radius)^3[/tex]
Plugging in the value for the average orbital radius, we get:
[tex]Period^2 = (4 AU)^3[/tex]
Simplifying this equation, we get:
[tex]Period^2 = 64 AU^3[/tex]
Taking the square root of both sides, we get:
Period = [tex]\sqrt{(64 AU^3}[/tex]
Simplifying this equation, we get:
Period = [tex]8 AU^{3/2}[/tex]
To learn more about period click here https://brainly.com/question/30763550
#SPJ11
What is a tire's angular acceleration if the tangential acceleration at a radius of 0.15 m is 0.094m/s2?
The tire's angular acceleration is 0.6267 rad/s^2.
Given
Radius of 0.15 m
Tangential acceleration : 0.094m/s2
To Find
Tire's angular acceleration
Solution
We can use the relationship between tangential acceleration, angular acceleration, and radius:
a_t = r * alpha
where:
a_t = tangential acceleration
alpha = angular acceleration
r = radius
Plugging in the given values, we have:
0.094 m/s^2 = (0.15 m) * alpha
Solving for alpha, we get:
alpha = 0.094 m/s^2 / 0.15 m
alpha = 0.6267 rad/s^2
Therefore, the tire's angular acceleration is 0.6267 rad/s^2.
Learn more:
brainly.com/question/14893907
a chemist dissolves. 607. g of pure hydrobromic acid in enough water to make up 210. ml of solution. calculate the ph of the solution.
To calculate the pH of the hydrobromic acid solution, we need to use the dissociation constant of hydrobromic acid. The dissociation reaction of hydrobromic acid can be written as: HBr(aq) ⇌ H+(aq) + Br-(aq) and pH of the hydrobromic acid solution is 4.78.
The Ka value for hydrobromic acid is 8.7 x 10^-10 at 25°C. We can use this value to calculate the concentration of H+ ions in the solution, which in turn can be used to calculate the pH of the solution.
First, we need to calculate the initial concentration of the hydrobromic acid solution. We can use the formula: C = m/V where C is the concentration in units of mol/L, m is the mass in grams, and V is the volume in liters. In this case, we have: C = 0.607 g / (210 mL x 1 L/1000 mL) = 2.89 mol/L
Next, we can use the dissociation constant to calculate the concentration of H+ ions: Ka = [H+][Br-]/[HBr]
[tex][H+] = √(Ka x [HBr]) = √(8.7 x 10^-10 x 2.89) = 1.67 x 10^-5 mol/L[/tex]
Finally, we can use the formula:
pH = -log[H+]
pH = [tex]-log(1.67 x 10^-5) = 4.78[/tex] Therefore, the pH of the hydrobromic acid solution is 4.78.
Know more about Ka value here:
https://brainly.com/question/15093291
#SPJ11
two objects of mass m and M interact with a central force that varies as 1/r^4 with proportionalconstant as F=k/r^4
derive an expression for the potential energy function,with the location of the reference for your formula being U(infinity)=0
The potential energy function for the given central force is U(r) = k * (r^-3) / 3, where k is the proportional constant.
How do you derive the formula?To derive the potential energy function, we first need to integrate the force with respect to r.
The force, F = k/r^4
We know that, force = -dU/dr (where U is the potential energy)
So, dU/dr = -k/r^4
Integrating both sides with respect to r, we get:
U(r) = - ∫ k/r^4 dr
U(r) = -k * ∫ r^-4 dr
U(r) = k * (r^-3) / -3 + C
where C is the constant of integration.
As U(infinity) = 0, the potential energy function becomes:
U(r) = k * (r^-3) / 3
Learn more about formula derivation:https://brainly.com/question/15248292
#SPJ1
The potential energy function for the given central force is U(r) = k * (r^-3) / 3, where k is the proportional constant.
How do you derive the formula?To derive the potential energy function, we first need to integrate the force with respect to r.
The force, F = k/r^4
We know that, force = -dU/dr (where U is the potential energy)
So, dU/dr = -k/r^4
Integrating both sides with respect to r, we get:
U(r) = - ∫ k/r^4 dr
U(r) = -k * ∫ r^-4 dr
U(r) = k * (r^-3) / -3 + C
where C is the constant of integration.
As U(infinity) = 0, the potential energy function becomes:
U(r) = k * (r^-3) / 3
Learn more about formula derivation:https://brainly.com/question/15248292
#SPJ1
Rank these spaceships on the basis of their length as measured by their respective captains_ Rank from largest to smallest: To rank items as equivalent; overlap them. 1. Lo 100 m U = 0.8c 2. Lo 200 U = 0.4c
3. Lo 100 m 0.4c 4. Lo 400 m U = 0.2c 5. Lo 200 0.8c 6. Lo 100 m U = 0.9c largest smallest ____________ ________
Therefore, the ranking of the spaceships on the basis of their length from largest to smallest as measured by their respective captains is: Lo 400 m U = 0.2c, Lo 200 0.8c, Lo 200 U = 0.4c, Lo 100 m U = 0.8c, Lo 100 m 0.4c, Lo 100 m U = 0.9c.
Rank from largest to smallest:
1. Lo 400 m U = 0.2c
2. Lo 200 U = 0.4c
3. Lo 100 m 0.4c
4. Lo 200 0.8c
5. Lo 100 m U = 0.8c
6. Lo 100 m U = 0.9c
Rank these spaceships based on their length as measured by their respective captains. The largest spaceship is the Lo 400 m U = 0.2c, followed by the Lo 200 U = 0.4c and then the Lo 100 m 0.4c. Next is the Lo 200 0.8c, followed by the Lo 100 m U = 0.8c, and finally the smallest spaceship is the Lo 100 m U = 0.9c.
Know more about Length here:
https://brainly.com/question/12241607
#SPJ11
a rifle fires a 6.0 g bullet. the 3.2 kg rifle is designed to have a recoil momentum of no more than 2.6 kg.m/s. what is the maximum muzzle velocity that the bullet can have?
The speed of a projectile with respect to the muzzle at the moment it leaves the end of a gun's barrel is known as muzzle velocity. The mass of the projectile is greater and the recoil speed is lesser than the bullet speed.
To find the maximum muzzle velocity that the bullet can have, given the recoil momentum of the rifle, we need to apply the principle of conservation of momentum.
Step 1: Set up the conservation of momentum equation.
Total momentum before firing = Total momentum after firing
0 = momentum of bullet - momentum of rifle
Step 2: Put in the known values.
0 = (mass of bullet × muzzle velocity) - (mass of rifle × recoil velocity)
Step 3: Rearrange the equation to solve for muzzle velocity.
Muzzle velocity = (mass of rifle × recoil velocity) / mass of bullet
Step 4: Convert the mass of the bullet from grams to kilograms.
Mass of bullet = 6.0 g = 0.006 kg
Step 5: Plug in the values and calculate the muzzle velocity.
Muzzle velocity = (3.2 kg × 2.6 kg.m/s) / 0.006 kg
Muzzle velocity ≈ 1386.67 m/s
So, the maximum muzzle velocity that the bullet can have is approximately 1386.67 m/s.
Learn more about muzzle velocity:
https://brainly.com/question/14243531
#SPJ11
Why do slow wave sleep (0.5-2hz) and sleep spindles(10 hz) have different frequencies?
Both are thought to be generated by thalamic reticular nuclei.
Slow wave sleep (SWS) and sleep spindles are two distinct types of brain activity that occur during different stages of sleep.
While both are generated by the thalamic reticular nuclei, they have different frequencies because they serve different functions in the sleep cycle.
Slow wave sleep, also known as deep sleep, is characterized by low-frequency brain waves (0.5-2 Hz) that are synchronized and slow. During SWS, the brain is in a state of rest and repair, allowing the body to recover from the physical and mental stress of the day.
The slow waves of SWS are believed to reflect the slow oscillations of the thalamocortical network, which help to consolidate memories and promote brain plasticity.
On the other hand, sleep spindles are brief bursts of high-frequency brain waves (10 Hz) that occur during stage 2 of the sleep cycle. Sleep spindles are generated by the thalamic reticular nuclei and are thought to play a role in sensory processing, memory consolidation, and protection against external stimuli.
Unlike the slow waves of SWS, sleep spindles are believed to reflect the activity of inhibitory interneurons in the thalamus, which help to filter out irrelevant information and maintain sleep stability.
In summary, slow wave sleep and sleep spindles have different frequencies because they serve different functions in the sleep cycle. While slow waves promote rest and repair, sleep spindles promote sensory processing and memory consolidation.
The thalamic reticular nuclei generate both types of activity, but they do so through different mechanisms that reflect their distinct functions.
To learn more about deep sleep, refer below:
https://brainly.com/question/31033983
#SPJ11
A block is sliding down a frictionless slope. If in the process its its kinetic energy increased by 65 J, by how much did its gravitational potential energy decrease? APE =
The decrease in gravitational potential energy (APE) of the block is 65J when block is sliding down a frictionless slope and kinetic energy increases by 65J.
Therefore, APE = 65 J
The block sliding down a frictionless slope means that there is no frictional force opposing the motion.
Therefore, all the potential energy of the block is converted into kinetic energy as it slides down the slope.
According to the law of conservation of energy, the total energy of the block (kinetic energy + potential energy) remains constant.
So, if the kinetic energy of the block increased by 65 J, it must have lost an equal amount of potential energy.
Therefore, the decrease in gravitational potential energy (APE) of the block is also 65J.
APE = 65 J
For more information on friction and kinetic energy refer to https://brainly.com/question/25959744?cb=1681559835186
#SPJ11
part a estimate the number of octaves in the range from 20 hzhz to 40 khzkhz . express your answer as an integer.
There are 10 octaves in the frequency range from 20 Hz to 40 kHz.
The frequency of a repeated event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarification. The unit of frequency is hertz (Hz), or one occurrence per second.
The frequency range from 20 Hz to 40 kHz covers a span of 40,000 - 20 = 39,980 Hz.
One octave is defined as a doubling of frequency, so to calculate the number of octaves in this frequency range, we need to find how many times the frequency doubles from 20 Hz to 40 kHz.
We can calculate this as follows:
㏒₂(40,000/20) = ㏒₂(2000) = 10.96578
Rounding down to the nearest integer, we get:
Number of octaves = 10
Therefore, there will be 10 octaves in the frequency range from 20 Hz to 40 kHz.
To know more about frequency
https://brainly.com/question/29806417
#SPJ4
There are 10 octaves in the frequency range from 20 Hz to 40 kHz.
The frequency of a repeated event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarification. The unit of frequency is hertz (Hz), or one occurrence per second.
The frequency range from 20 Hz to 40 kHz covers a span of 40,000 - 20 = 39,980 Hz.
One octave is defined as a doubling of frequency, so to calculate the number of octaves in this frequency range, we need to find how many times the frequency doubles from 20 Hz to 40 kHz.
We can calculate this as follows:
㏒₂(40,000/20) = ㏒₂(2000) = 10.96578
Rounding down to the nearest integer, we get:
Number of octaves = 10
Therefore, there will be 10 octaves in the frequency range from 20 Hz to 40 kHz.
To know more about frequency
https://brainly.com/question/29806417
#SPJ4
Find E*(s), with T = 0.2s, for E(s) = 1 - e^-TS/s middot 5S/(s + 1)(s + 3).
E*(s) = [1/0.4] / (s+1) - [1/2.4] / (s+3) + [5/2.4] / (s+0.2) - [5s/(s+1)(s+3)]
To find E*(s), we first need to find the Laplace transform of E(s):
E*(s) = L{E(s)} = L{1 - e^(-TS)} * 5s/(s+1)(s+3)
Using the formula for the Laplace transform of an exponential function, we have:
L{e^(-TS)} = 1/(s+T)
So:
E*(s) = (1/(s+T) - 1) * 5s/(s+1)(s+3)
Simplifying this expression, we have:
E*(s) = [5s/(s+1)(s+3)(s+T)] - [5s/(s+1)(s+3)]
Now we need to use partial fraction decomposition to split the first term into two fractions. We can write:
5s/(s+1)(s+3)(s+T) = A/(s+1) + B/(s+3) + C/(s+T)
Multiplying both sides by (s+1)(s+3)(s+T) and simplifying, we get:
5s = A(s+3)(s+T) + B(s+1)(s+T) + C(s+1)(s+3)
Plugging in s=-1, s=-3, and s=-T, we get a system of equations:
-15A = -4B - 2C
5A = -2B - 2C
5A = -4B - 3C
Solving this system, we get:
A = 1/(2T-4)
B = -1/(2T+2)
C = 5/(2T+2)
Substituting these values back into E*(s), we get:
E*(s) = [1/(2T-4)] / (s+1) - [1/(2T+2)] / (s+3) + [5/(2T+2)] / (s+T) - [5s/(s+1)(s+3)]
Finally, plugging in T=0.2s, we get:
E*(s) = [1/0.4] / (s+1) - [1/2.4] / (s+3) + [5/2.4] / (s+0.2) - [5s/(s+1)(s+3)]
To learn more about exponential function, refer below:
https://brainly.com/question/15352175
#SPJ11
Obtain the inductor current for both t0 and t> 0 in the given circuit. Assume L 3 H 24 V + t=0 2Ω 3Ω 6Ω The inductor current for t = 0-is A. The inductor current for t > 0 is i(t) = A.
The circuit's initial current is zero whenever the switch is open. The inductor behaves as a circuit as soon even as switch closes at time t=0+, therefore there is no current flowing through the circuit.
What does the circuit term T 0 +) mean?The switch's early closure indicates that circuit is in dc steady-state at time zero. As a result, while the capacitor behaves like an open circuit, the inductor operates like a short circuit. During t = 0-, b. The switch is open at t = 0+, and the inductor & capacitor both experience the same current flow.
Inductor formula: what is it?The ratio of the inductor voltage to the change in current is 1. The inductor's i- v equation is now as follows: v = L d I d t v = text L, dfrac, di, dt v=Ldtdi v, equal, i. introduction, L, end text, begin fraction, d, I divvied up by, d, t, ending fraction.
To know more about current visit:
https://brainly.com/question/10439697
#SPJ1
Who ever does it will get 50 points
Please?
Answer:
in explanation...
Explanation:
Step 4: We first looked at the years of the different objects and then put them in chronological order, from most recent being closest to us and the object that was the oldest farther away. Then we looked at the months of the events and put them in order according to that (example, if one event was March of 2018 and another was July of 2019, then the March of 2019 object would be closer and more recent). By using this method, yes we were able to put them in chronological order.
Step 5: The geologic time scale was developed after scientists observed changes in the fossils going from oldest to youngest sedimentary rocks and they used relative dating to divide Earth's past in several chunks of time when similar organisms were on Earth. This is similar to us putting the events in order because we would place the most recent events as the youngest and the older events, that occurred longer ago, as older.
Step 6: Scientists should use their observations of the way those rocks and fossils have formed and preserved over time to see exactly which fossil or rock was the oldest, as opposed to the youngest.
a 250 mlml gas sample has a mass of 0.436 gg at a pressure of 736 mmhgmmhg and a temperature of 26 ∘c∘c.. What is the molar mass of the gas?
The molar mass of a 250 mL gas sample with a mass of 0.436 g, at a pressure of 736 mmHg, and a temperature of 26°C is 43.2 g/mol.
To determine the molar mass of a 250 mL gas sample with a mass of 0.436 g, at a pressure of 736 mmHg, and a temperature of 26°C, you can use the Ideal Gas Law formula: PV=nRT. First, you'll need to convert the units and temperature to the appropriate format.
First, convert volume from mL to L:
250 mL = 0.250 L
Convert pressure from mmHg to atm:
736 mmHg × (1 atm / 760 mmHg)
≈ 0.968 atm
Convert temperature from °C to K:
26°C + 273.15
= 299.15 K
Now, we can use the Ideal Gas Law to calculate the number of moles (n):
PV = nRT
n = PV / RT
n = (0.968 atm)(0.250 L) / (0.0821 L atm/mol K)(299.15 K)
n ≈ 0.0101 mol
Finally, to find the molar mass (M) of the gas:
M = mass of gas / number of moles
M = 0.436 g / 0.0101 mol
M ≈ 43.2 g/mol
Thus, the molar mass of the gas is approximately 43.2 g/mol.
Learn more about molar gas: https://brainly.com/question/30720372
#SPJ11
A ray of light in air crosses a boundary into transparent stuff whose index of refraction is 2.45. The speed of the light as it moves through the stuff is ___ x108 m/s.
The speed of light as it moves through the substance is approximately 1.22 x 10^8 m/s.
The speed of light in a vacuum is approximately 3 x 108 m/s. When a ray of light crosses a boundary into a transparent substance with an index of refraction of 2.45, the speed of light is reduced by a factor of 1.45 (since the index of refraction is the ratio of the speed of light in a vacuum to the speed of light in the substance).
When a ray of light moves from air into a transparent medium with a different index of refraction, its speed changes according to the formula:
speed of light in the medium = speed of light in vacuum / index of refraction
The speed of light in a vacuum is approximately 3 x 10^8 m/s, and the given index of refraction for the transparent material is 2.45. Plugging these values into the formula, we get:
speed of light in the medium = (3 x 10^8 m/s) / 2.45 ≈ 1.22 x 10^8 m/s
So, the speed of the light as it moves through the transparent medium is approximately 1.22 x 10^8 m/s.
To learn more about speed of light click here
brainly.com/question/1555553
#SPJ11
A jewelry thief needs to jump across a 3-meter-wide alleyway as she makes her escape. If she has a horizontal velocity of 6 m/s, how long will it take her to land on the other side? A jewelry thief needs to jump across a 3-meter-wide alleyway as she makes her escape. If she has a horizontal velocity of 6 m/s, how long will it take her to land on the other side? 0.6 s 0.5 s 1.1 s 1.2 s
The time it will take her to land on the other side is 0.5 seconds.
What is the hypotenuse's length in the triangle below that measures 30 60 90?In a triangle with three angles of 30°, 60°, and 90°, the hypotenuse is twice as long as the shorter leg and three times as long as the latter. To understand why this is the case, consider that the triangle is a right triangle given these numbers according to the Converse of the Pythagorean Theorem. The lengths of the three sides in a triangle of this kind are referred to as a Pythagorean triple.
distance = velocity x time
In this case, the distance is 3 meters and the velocity is 6 m/s, so:
3 = 6 x time
Solving for time, we get:
time = 3/6 = 0.5 seconds
To know more about time visit:-
https://brainly.com/question/9834403
#SPJ1
Calculate the time required to fly from P to B, in terms of the eccentricity e and the period T. B lies on the minor axis.
The time required to fly from P to B is given by T = (2×a/v) × (e + √(1-e²)), where a is the length of the major axis of the ellipse, e is the eccentricity, and v is the velocity of the spacecraft.
What is Kepler's second law?Kepler's second law, also known as the law of equal areas, states that a planet or other celestial body moves faster when it is closer to the sun and slower when it is farther away.
Assuming that P and B are the foci of an elliptical orbit, with P located at the vertex of the major axis, and that the time required to complete one orbit (period) is T, we can use Kepler's second law to determine the time required to fly from P to B.
Therefore, the time required to travel from P to B is equal to the time required to travel from B to P along the minor axis.
The distance between the foci of an ellipse (2f) is related to the length of the major axis (2a) and the eccentricity (e) by the equation:
2f = 2a×e
Since B lies on the minor axis, the distance between B and the center of the ellipse (C) is equal to the length of the minor axis (2b), which can be related to the major axis and the eccentricity by the equation:
2b = 2a×√(1-e²)
The time required to travel from P to B along the minor axis is given by the equation:
T/2 = (1/2) × [(2b + 2f) / v]
Substituting the expressions for 2f and 2b gives:
T/2 = (1/2) × [(2ae + 2a√(1-e²)) / v]
Simplifying the expression gives:
T = (2×a/v) × (e + √(1-e²))
To know more about distance visit:
https://brainly.com/question/31194640
#SPJ1
what angle ( in radians ) is subtended from the center of a circle of radius 1.20 m by an arc of length 0.20 m?
The angle subtended by the arc is 1/6 radians, which is approximately equal to 0.524 radians or 30 degrees.
To find the angle subtended by an arc of length 0.20 m on a circle of radius 1.20 m, we can use the formula for the arc length of a circle:
Arc Length = Radius x Central Angle
We can rearrange this formula to solve for the central angle:
Central Angle = Arc Length / Radius
Plugging in the given values, we get:
Central Angle = 0.20 m / 1.20 m
Simplifying, we get:
Central Angle = 1/6 radians
Therefore, the angle subtended by the arc is 1/6 radians, which is approximately equal to 0.524 radians or 30 degrees.
Learn more about arc of length
https://brainly.com/question/29886215
#SPJ4
an inductor with an inductance of 4.50 hh and a resistance of 8.00 ωω is connected to the terminals of a battery with an emf of 6.00 vv and negligible internal resistance. Just after the circuit is completed, at what rate is the battery supplying electrical energy to the circuit?
The battery is supplying electrical energy to the circuit at a rate of 4.50 W.
To answer your question about the rate at which the battery supplies electrical energy to the circuit with an inductor of 4.50 H and a resistance of 8.00 Ω connected to a battery with an emf of 6.00 V:
Determine the initial current in the circuit. Right after the switch is closed, the inductor acts as an open circuit, and no current flows through it. Thus, the current is determined only by the resistance.
Initial current (I₀) = EMF / Resistance
I₀ = 6.00 V / 8.00 Ω
I₀ = 0.75 A
Calculate the power supplied by the battery. The electrical energy supplied by the battery can be represented as the power it provides.
Power (P) = Voltage × Current
P = 6.00 V × 0.75 A
P = 4.50 W
Thus, the battery is sending electrical energy to the circuit at a rate of 4.50 W shortly after the circuit is finished.
Learn more about "electrical energy": https://brainly.com/question/21222010
#SPJ11
what is the theoretical angular resolution of a 4 inch diameter telescope measured in seconds of arc? round your answer to the nearest hundredth.
The theoretical angular resolution of a 4-inch diameter telescope is approximately 13.54 seconds of arc, rounded to the nearest hundredth.
To calculate the theoretical angular resolution of a 4-inch diameter telescope measured in seconds of arc, we'll use the following formula:
Angular resolution (in arcseconds) = (1.22 * λ) / D
where λ is the wavelength of light being observed (in meters) and D is the diameter of the telescope's aperture (in meters). For visible light, we can use the average wavelength of 550 nanometers (550 x 10^-9 meters). First, convert the diameter from inches to meters:
4 inches * 0.0254 meters/inch ≈ 0.1016 meters
Now, plug the values into the formula:
Angular resolution (in arcseconds) ≈ ([tex]1.22 * 550 * 10^{-9}[/tex]m) / 0.1016 m
Angular resolution (in arcseconds) ≈ ([tex]671 * 10^{-9}[/tex] m) / 0.1016 m
Angular resolution (in arcseconds) ≈ [tex]6.6 * 10^{-6}[/tex]m / 0.1016 m
Angular resolution (in arcseconds) ≈ 0.000065 m
To convert the angular resolution from radians to arcseconds, multiply by (180°/π) and then by 3600 arcseconds/degree:
Angular resolution (in arcseconds) ≈ 0.000065 * (180/π) * 3600
Angular resolution (in arcseconds) ≈ 13.54
To learn more about angular resolution click here https://brainly.com/question/25014179
#SPJ11
17. How much work is done to transfer 0.15 C of charge through a potential difference of 9V? e 173 O 0.17j 0 1.353 13.7 J 60
The amount of work done is 1.35 J.
How do you assess the volume of work completed?Calculating the Work Done on an Object: Formula and Terms. Work is the energy used by one thing to exert a force on another object in order to move it over a distance. The formula W=Fd W = F d determines the work performed on an item for a given amount of force, F, and a certain distance, d.
The formula work = charge x potential difference may be used to determine how much effort is required to transfer 0.15 C
of charge across a 9 V potential difference.
Work = 0.15 C x 9 V = 1.35 J is
the result of substituting the supplied values.
To now more about work done visit:-
https://brainly.com/question/10334435
#SPJ1
why is ism transparent at near-infrared and radio but opaque in visual wavelengths
The interstellar medium (ISM) is transparent at near-infrared and radio wavelengths but opaque in visual wavelengths due to the following reasons:
1. Scattering and absorption: Visual wavelengths are scattered and absorbed more by the dust particles and gas molecules in the ISM. This makes it difficult for light at visual wavelengths to pass through, causing the ISM to appear opaque. On the other hand, near-infrared and radio wavelengths are less affected by scattering and absorption, allowing them to pass through the ISM more easily, making it transparent at these wavelengths.
2. Dust particle size: The size of dust particles in the ISM is typically similar to the wavelength of visible light. This causes more scattering and absorption of visual wavelengths, whereas near-infrared and radio wavelengths, which are much larger, are less affected by these dust particles.
3. Energy levels of atoms and molecules: The ISM consists of various atoms and molecules, each having specific energy levels. Visual wavelengths correspond to the energy transitions of these atoms and molecules, causing them to absorb and re-emit this light, making the ISM opaque. Near-infrared and radio wavelengths do not correspond to these energy levels, allowing them to pass through without being absorbed or re-emitted.
Learn more about visual wavelength https://brainly.com/question/10728818
#SPJ11
Light of wavelength 587.0 nm illuminates a slit of width 0.70 mm. (a) At what distance from the slit should a screen be placed if the first minimum in the diffraction pattern is to be 0.95 mm from the central maximum?(b) Calculate the width of the central maximum.
To ensure that the first minimum in the diffraction pattern is 0.95 mm away from the central maximum, the screen should be positioned at a distance of 3.0 m from the slit. The central maximum has a width of approximately 4.7 mm.
Given:
Wavelength, λ = 587.0 nm = 587.0 × 10⁻⁹ m
Slit width, a = 0.70 mm = 0.70 × 10⁻³ m
Distance from slit to screen, D = ?
Distance of first minimum from central maximum, y = 0.95 mm = 0.95 × 10⁻³) m
(a) Using the formula for the position of the first minimum in the diffraction pattern:
y = (λD)/a
Rearranging the formula to solve for D, we get:
D = (ay)/λ = (0.95 × 10⁻³ × 0.70 × 10^⁻³)/(587.0 × 10⁻⁹) = 1.13 m
Therefore, the screen should be placed 1.13 m away from the slit to observe the first minimum in the diffraction pattern at a distance of 0.95 mm from the central maximum.
(b) Using the formula for the width of the central maximum:
w = (λD)/a
Substituting the given values, we get:
w = (587.0 × 10⁻⁹ × 1.13)/(0.70 × 10⁻³) = 0.95 × 10⁻³m = 0.95 mm
Therefore, the width of the central maximum is 0.95 mm.
To know more about the central maximum refer here :
https://brainly.com/question/31389332#
#SPJ11
in order to find the moment of inertia of a solid object, you need to express a mass element dm in terms of known and integrable quantities. for a cylinder of length l and density , dm is equal to:A. rhoL(2πz) dzB. rhoz(2πr) drC. rho(2πr^2) drD. rhoL(2πr) dr
The correct answer is D. rhoL(2πr) dr. In order to find the moment of inertia of a solid object, we need to express a mass element dm in terms of known and integrable quantities.
For a cylinder of length l and density rho, the mass element dm can be expressed as dm = rho(2πrL) dr, where r is the radius of the cylinder and dr is the infinitesimal thickness of the cylinder.
However, we are interested in finding the moment of inertia about an axis perpendicular to the cylinder, passing through its center. This requires us to express dm in terms of the perpendicular distance from the axis, which is given by r.
Therefore, we can rewrite dm as dm = rho(2πrL) r dr, which simplifies to dm = rhoL(2πr) dr.
To learn more about moment of inertia click here https://brainly.com/question/30051108
#SPJ11
Consider the internal reflection of light at the interface between water and ice.What is the minimum critical angle, in degrees, at which you will get total reflection at this interface?\Thetac= _______Values are for medium: nwater= 1.333 ; nice= 1.309
The minimum critical angle for total internal reflection of light at the interface between water and ice is approximately 79.5 degrees.
To determine the minimum critical angle for total internal reflection of light at the interface between water and ice, we can use Snell's law and the equation for critical angle:
sin(thetac) = n2/n1
where n1 is the refractive index of the first medium (water) and n2 is the refractive index of the second medium (ice). When light passes from a medium with a higher refractive index to one with a lower refractive index, the angle of refraction is larger than the angle of incidence, and there is no total internal reflection. However, if the angle of incidence is large enough, there will be no angle of refraction, and all of the light will be reflected back into the first medium.
In this case, n1 = 1.333 (the refractive index of water) and n2 = 1.309 (the refractive index of ice). Plugging these values into the equation for critical angle, we get:
sin(thetac) = 1.309/1.333 = 0.9818
Taking the inverse sine of this value, we find that:
thetac = 79.5 degrees
Therefore, the minimum critical angle for total internal reflection of light at the interface between water and ice is approximately 79.5 degrees.
Learn more about reflection here:
https://brainly.com/question/30270479
#SPJ11