Determine the number of protons and electrons for:Ba^2+K^+P^3-Br-

The pH at the equivalence point of the titration of a 25.0-mL sample of 0.150-mol L−1 acetic acid with 0.150-mol L−1 NaOH solution is 9.26 (Option C).

The equivalence point of the titration occurs when moles of NaOH added is equal to moles of acetic acid present in the solution.

Moles of acetic acid present initially = 0.150 mol/L × 25.0 mL/1000 mL = 0.00375 mol

Moles of NaOH required to neutralize acetic acid = 0.00375 mol

Volume of NaOH required = 0.00375 mol / 0.150 mol/L = 0.025 L = 25.0 mL

At the equivalence point, the solution contains only sodium acetate and water.

Moles of sodium acetate formed at equivalence point = 0.00375 mol

Concentration of sodium acetate = 0.00375 mol / 0.025 L = 0.15 mol/L

Since sodium acetate is a salt of a weak acid (acetic acid) and a strong base (NaOH), the solution will be basic.

The pH at the equivalence point can be calculated using the following equation:

pH = pKb + log([base]/[acid])

Since sodium acetate is the conjugate base of acetic acid, we can use the Kb expression for the acetate ion:

Kb = Kw/Ka = 1.0 × [tex]10^-^1^4[/tex]/1.8 × [tex]10^-^5[/tex] = 5.56 × [tex]10^-^1^0[/tex]

pKb = -log(Kb) = -log(5.56 × [tex]10^-^1^0[/tex]) = 9.26

[base]/[acid] = 1 since the moles of acid and base are equal at equivalence point

pH = 9.26 + log(1) = 9.26

Therefore, the pH at the equivalence point is 9.26 (Option c).

Learn more about Equivalence point

brainly.com/question/31375551

#SPJ11

In the crystallization lab, aspirin (acetylsalicylic acid) was isolated from commercial tablets by dissolving them in a suitable solvent, filtering the impurities, and then cooling the solution to recrystallize the pure aspirin.


1. Crush the commercial aspirin tablets into a fine powder to increase surface area and ease the dissolving process.
2. Select a suitable solvent (e.g., ethanol or water) that will dissolve the aspirin, but not the tablet fillers and binders.
3. Heat the solvent to improve its dissolving ability and add the crushed tablets, stirring until aspirin dissolves.
4. Filter the warm solution to remove any undissolved impurities or tablet fillers.
5. Cool the filtered solution gradually, allowing aspirin to slowly recrystallize and separate from the remaining liquid.
6. Collect the crystallized aspirin by vacuum filtration, wash it with a small amount of cold solvent to remove any remaining impurities, and allow it to dry.
7. Weigh the dried aspirin crystals to determine the yield and purity of the isolated acetylsalicylic acid.

To know more about acetylsalicylic acid click on below link:

https://brainly.com/question/13188890#

#SPJ11

One major disadvantage of an online survey is the potential for low response rates, as people might ignore or not complete the survey, leading to a smaller and possibly less representative sample of the target population.

One major disadvantage of an online survey is that it may not accurately represent the opinions and experiences of those who do not have access to the internet or are not comfortable using technology. This can lead to a skewed or incomplete understanding of the target population.

A  survey methoAd is a procedure, instrument, or technique you might use to interview a predetermined group of people in order to collect data for your project. Typically, it makes it easier for participants in the research to communicate with the individual or group conducting the study.

Depending on the type of study you're conducting and the kind of data you ultimately want to collect, survey methodologies might be either qualitative or quantitative.

Visit here to learn more about survey  : brainly.com/question/13192080
#SPJ11

The solubility of silver iodide in molar form is 1.2 108 M.

Silver iodide dissolves in water at a rate of 9.1 109 M, or mol/L. This indicates that silver iodide doesn't dissociate very much, according to a physical interpretation. Ksp is constant for a saturated solution of a particular substance at a given temperature (van't Hoff equation).

Ksp = [Silver ion][Iodine ion]

Let x represent Silver Iodide's molar solubility.

At equilibrium, the concentration of Silver ion ions and Iodine ion ions will both be x.

Therefore, we can write:

Ksp = x²

Solving for x, we get:

x = √(Ksp) = √(1.5 × 10⁻¹⁶) = 1.2 × 10⁻⁸ M

To know more about solubility visit:-

https://brainly.com/question/28170449

#SPJ1

The concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

To answer this question, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

In this case, NH3 is the base (A-) and NH4+ is the acid (HA). The pKa for NH3 is 9.24, so the pKb is 4.74 (pKb + pKa = 14).

Before the addition of HCl, the buffer contains equal amounts of NH3 and NH4+, so [A-]/[HA] = 1. Plugging this into the Henderson-Hasselbalch equation, we can find the pH:

pH = pKa + log(1) = 9.24 + 0 = 9.24

Now let's consider what happens when we add HCl. HCl is a strong acid that will completely dissociate in water, so we can assume that all of the HCl will react with NH3 to form NH4+ and Cl-.

NH3 + HCl → NH4+ + Cl-

To figure out how much NH3 is left in the buffer, we need to first calculate how much NH4+ is formed. The amount of NH4+ formed is equal to the amount of HCl added, since NH3 and HCl react in a 1:1 ratio.

moles of HCl = volume of HCl (in L) x concentration of HCl
moles of HCl = 7.50 mL x (1 L/1000 mL) x 0.125 mol/L = 0.000938 mol

So, 0.000938 mol of NH4+ is formed. This means that the concentration of NH4+ in the buffer has increased by:

Δ[NH4+] = moles of NH4+ formed / total volume of buffer
Δ[NH4+] = 0.000938 mol / 0.1 L = 0.00938 M

Since we started with equal concentrations of NH3 and NH4+, the concentration of NH3 must have decreased by the same amount:

Δ[NH3] = -0.00938 M

Therefore, the new concentration of NH3 in the buffer is:

[NH3] = 0.300 M - 0.00938 M = 0.29062 M

So, the concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

Know more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13423434

#SPJ11

The pKa for a weak acid is determined by finding the pH at the halfway point in the titration, where the pH equals the pKa, and the intercept of the pH titration curve equals the pKa.


In this experiment, a weak acid is titrated with a strong base. The pH of the solution is continuously monitored and plotted against the volume of the added base, forming a titration curve.

The pKa of the weak acid can be determined by observing the halfway point of the titration, which is when the volume of the base added is half of the volume needed to reach the equivalence point. At this point, the concentration of the weak acid equals the concentration of its conjugate base.

The pH of the solution at the halfway point will be equal to the pKa of the weak acid. Additionally, the intercept of the pH titration curve at this point also equals the pKa, providing further confirmation of the pKa value.

To know more about conjugate base click on below link:

https://brainly.com/question/30225100#

#SPJ11

False. Infrared (IR) spectroscopy is used to determine the functional groups present in a compound, but it cannot directly confirm the presence of magnesium in the final product. To determine if a compound contains magnesium, other analytical techniques, such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry, would be more appropriate.

IR spectroscopy is a technique that is used to identify and characterize the functional groups present in a sample by measuring the absorption or transmission of infrared radiation by the sample. It is based on the principle that different chemical bonds absorb infrared radiation at different frequencies, allowing them to be distinguished from one another.

Magnesium, however, does not have any characteristic absorption frequencies in the infrared region, and therefore, cannot be detected using IR spectroscopy. Instead, techniques such as atomic absorption spectroscopy (AAS) or inductively coupled plasma mass spectrometry (ICP-MS) are more appropriate for the detection and quantification of magnesium in a sample.

Therefore, if the goal is to determine the presence of magnesium in the final product, IR spectroscopy would not be a suitable technique, and alternative methods such as AAS or ICP-MS should be used.

Learn more about Infrared (IR) spectroscopy here:

https://brainly.com/question/13265448

#SPJ11

The original molarity of the weak acid solution is approximately 2.87 × 10^(-5) M.

To find the original molarity of the weak acid solution with a Ka of 3.5 × 10^(-5) and a pH of 5.34 at 25°C. Follow these steps:

Step 1: Calculate the hydrogen ion concentration [H+] from the pH
pH = -log[H+]
5.34 = -log[H+]
[H+] = 10^(-5.34)

Step 2: Set up the Ka expression for the weak acid
Ka = [H+]² / ([HA]₀ - [H+]), where [HA]₀ is the original molarity of the weak acid

Step 3: Substitute the given Ka value and the calculated [H+] into the expression
3.5 × 10^(-5) = (10^(-5.34))^2 / ([HA]₀ - 10^(-5.34))

Step 4: Solve for the original molarity [HA]₀
3.5 × 10^(-5) = 10^(-10.68) / ([HA]₀ - 10^(-5.34))
[HA]₀ = 10^(-10.68) / (3.5 × 10^(-5)) + 10^(-5.34)

Step 5: Calculate [HA]₀
[HA]₀ ≈ 2.87 × 10^(-5) M

To know more about molarity refer to

https://brainly.com/question/30404105

#SPJ11

2 is the smallest number of carbons that required for a ketone .The correct answer is d. 2.

This is because the ketone functional group (-C=O) must be attached to a carbon atom, and the molecule must also have at least one other carbon atom to be considered an organic molecule. Therefore, the smallest possible molecule containing a ketone functional group would have two carbons: one for the ketone functional group and one for the other carbon atom. A ketone functional group has a carbonyl group (C=O) with two carbons attached to it.

Therefore, the minimum number of carbons required for a ketone is 2. An example of the simplest ketone is acetone, with the formula [tex]CH_3COCH_3[/tex]. Therefore, the correct option is d. 2 .

To know more about Ketone refer here :

https://brainly.com/question/27179090

#SPJ11

40k decays by positron emission. To balance the nuclear equation, we'll identify the mass number, atomic number, and element symbol for the missing species.

know more about positron emission here: https://brainly.com/question/16398568

#SPJ11

The value of q  when 0.100 g of ice is cooled from -10.0 0c to -75.0 0c is calculated to be -13.56 J meaning heat was lost.

To calculate q, which represents the amount of heat transferred, we need to use the formula:

q = m × cs × ΔT

Where:
- m is the mass of the substance (in grams)
- cs is the specific heat capacity of the substance (in J/g.K)
- ΔT is the change in temperature (in K or °C)

In this case, we have:

- m = 0.100 g (mass of ice)
- cs = 2.087 J/g.K (specific heat capacity of ice)
- ΔT = (-75.0 °C) - (-10.0 °C) = -65.0 °C (change in temperature)

Note that we need to use the absolute values of temperatures in Kelvin (K) in the formula, but since we're only interested in the temperature difference, we can use Celsius (°C) as well.

Now we can plug in the values and calculate q:

q = 0.100 g × 2.087 J/g.K × (-65.0 °C)
q = -13.56 J

The negative sign indicates that heat was transferred out of the ice (i.e. it lost heat) as it was cooled down.

More on q calculation: https://brainly.com/question/29993661

#SPJ11

Answer:

P1V1/P2

=200×4.50/760

=1.1842

The type of Isomerism shown by  [Co(NH3)5NO2]Cl 2 is Linkage Isomerism.

The structural isomer of [Co(NH3)5NO2]Cl2 is [Co(NH3)5ONO]Cl2.

The isomerism exhibited between the two compounds [Co(NH3)5NO2]Cl2 and [Co(NH3)5ONO]Cl2 is called linkage isomerism. In these isomers, the ligand NO2 is bound to the central metal atom (cobalt) through different atoms (nitrogen in the first compound and oxygen in the second compound). This difference in the binding site causes the compounds to have different physical and chemical properties. Linkage isomerism is a type of coordination isomerism that arises due to the reversible coordination of a ligand to a metal center through different atoms or groups. This type of isomerism is often observed in coordination complexes containing ambidentate ligands.

Know more about Isomers here:

https://brainly.com/question/28295730

#SPJ11

In an oxidation-reduction experiment, it is important to observe the reaction after 30 minutes because the reaction requires time to complete.

During this time, the solution and solid may look different than when the reaction begins, and silver may continue to precipitate for 30 minutes.

By observing the reaction after 30 minutes, we can ensure that the reaction has completed and that we have accurate results.

It also allows us to analyze the full extent of the reaction and make any necessary adjustments or observations. Therefore, it is crucial to wait the full 30 minutes before analyzing the results of an oxidation-reduction experiment.

learn more about experiment here:brainly.com/question/30055326

#SPJ11

There are 0.085 moles of H3O in the 85 L solution with a pH of 3.0. H3O+ (hydronium ion) is an important species in acid-base chemistry and plays a crucial role in many chemical reactions.

To determine the number of moles of H3O in the solution, we need to use the pH value provided. The pH is a measure of the concentration of H3O ions in the solution.

The formula for pH is pH = -log[H3O+], where [H3O+] represents the concentration of H3O ions in moles per liter.

So, we can rearrange the formula to solve for [H3O+]: [H3O+] = 10^(-pH).

Substituting the given pH of 3.0 into the formula, we get:

[H3O+] = 10^(-3.0) = 0.001 moles per liter

Since the solution has a volume of 85 liters, we can calculate the total number of moles of H3O in the solution by multiplying the concentration by the volume:
Total moles of H3O = concentration x volume = 0.001 mol/L x 85 L = 0.085 moles

Learn more about moles of H3O here:

https://brainly.com/question/31323883

#SPJ11

The atomic ratio of indium-112 to indium-115 in naturally occurring indium is approximately 4:1.
The atomic number of indium is 49, which means it has 49 protons. Its atomic mass is 114.8 g/mol. Naturally occurring indium contains a mixture of indium-112 (112In) and indium-115 (115In). The atomic ratio of these isotopes in indium can be approximated as follows:

(Atomic mass - mass of 112In) / (mass of 115In - mass of 112In) = (114.8 - 112) / (115 - 112) = 2.8 / 3 ≈ 0.93

Therefore, the atomic ratio of indium-112 to indium-115 in naturally occurring indium is approximately 0.93:1.

The atomic number of an element is the number of protons in the nucleus of an atom of that element. It is a unique identifier for each element on the periodic table, and it determines the element's chemical properties. For example, all carbon atoms have six protons in their nucleus, so the atomic number of carbon is 6. The atomic number is typically represented by the symbol Z.

Visit here to learn more about atomic ratio brainly.com/question/19327306

#SPJ11

Iron-sulfur clusters are usually attached to proteins via specific amino acid residues called cysteine.

Iron-sulfur clusters play a crucial role in various biological processes, such as electron transport, enzyme catalysis, and gene regulation. These clusters are typically coordinated by the sulfur atoms of cysteine residues in the protein structure. Cysteine has a thiol group (-SH) that readily forms a bond with the iron atoms in the cluster, providing a stable and efficient attachment site.

Glycine and arginine, on the other hand, do not commonly participate in binding iron-sulfur clusters to proteins. Glycine has a simple hydrogen atom as its side chain, which does not have the ability to form a bond with the iron-sulfur cluster. Similarly, arginine has a guanidino group in its side chain, which is more involved in forming hydrogen bonds and salt bridges, rather than binding to iron-sulfur clusters.

In summary, iron-sulfur clusters are typically attached to proteins via cysteine amino acid residues, due to the strong bond formed between the sulfur atoms in cysteine's thiol group and the iron atoms in the cluster.

Learn more about amino acid residues here: https://brainly.com/question/30415851

#SPJ11

41.5 grams of oxygen must have reacted to produce 88.3 grams of aluminum oxide.

To determine how many grams of oxygen must have reacted in the given equation, we first need to find the molar mass of aluminum oxide (Al2O3).
The molar mass of Al2O3 is 2x(27 g/mol of Al) + 3x(16 g/mol of O) = 102 g/mol of Al2O3.

Next, we need to use the stoichiometry of the equation to relate the amount of Al2O3 produced to the amount of oxygen that reacted. According to the equation, 3 moles of oxygen are required to react with 4 moles of aluminum to produce 2 moles of aluminum oxide.

This means that for every 102 g/mol of Al2O3 produced,

3x(16 g/mol of O) = 48 g of oxygen must have reacted.

To determine how many grams of oxygen must have reacted to produce 88.3 g of Al2O3, we can use a proportion:

102 g of Al2O3 / 48 g of O = 88.3 g of Al2O3 / x g of O

Solving for x, we get:

x = (48 g of O x 88.3 g of Al2O3) / 102 g of Al2O3

x = 41.5 g of O

Therefore, 41.5 grams of oxygen must have reacted to produce 88.3 grams of aluminum oxide.

To know more about molar mass refer to

https://brainly.com/question/837939

#SPJ11

41.5 grams of oxygen must have reacted to produce 88.3 grams of aluminum oxide.

To determine how many grams of oxygen must have reacted in the given equation, we first need to find the molar mass of aluminum oxide (Al2O3).
The molar mass of Al2O3 is 2x(27 g/mol of Al) + 3x(16 g/mol of O) = 102 g/mol of Al2O3.

Next, we need to use the stoichiometry of the equation to relate the amount of Al2O3 produced to the amount of oxygen that reacted. According to the equation, 3 moles of oxygen are required to react with 4 moles of aluminum to produce 2 moles of aluminum oxide.

This means that for every 102 g/mol of Al2O3 produced,

3x(16 g/mol of O) = 48 g of oxygen must have reacted.

To determine how many grams of oxygen must have reacted to produce 88.3 g of Al2O3, we can use a proportion:

102 g of Al2O3 / 48 g of O = 88.3 g of Al2O3 / x g of O

Solving for x, we get:

x = (48 g of O x 88.3 g of Al2O3) / 102 g of Al2O3

x = 41.5 g of O

Therefore, 41.5 grams of oxygen must have reacted to produce 88.3 grams of aluminum oxide.

To know more about molar mass refer to

https://brainly.com/question/837939

#SPJ11

The structural formula for the β-ketoester formed in this reaction can be drawn as follows:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH

- Stoichiometry refers to the quantitative relationship between reactants and products in a chemical reaction. It is often expressed in terms of mole ratios.
- Condensation is a type of chemical reaction in which two molecules combine to form a larger molecule, often with the loss of a small molecule such as water or alcohol.
- Organic refers to compounds that contain carbon atoms bonded to hydrogen atoms, and often other elements such as oxygen, nitrogen, and sulfur.
Now, let's consider the Claisen condensation of ethyl butanoate with the following ester:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH
This reaction involves the condensation of two esters, and results in the formation of a β-ketoester (also known as a p-ketoester) as the major product. The β-ketoester has a carbonyl group (C=O) at the β-position (i.e. the second carbon atom) of the ester group.
The structural formula for the β-ketoester formed in this reaction can be drawn as follows:
CH3CH2COOCH2CH3 + CH3COOCH2CH3 → (CH3CH2CO)2CHCOOCH2CH3 + CH3CH2OH
As you can see, the β-Keto ester has an ethyl group (CH3CH2) attached to the β-carbon, and a methyl group (CH3) attached to the carbonyl carbon. The ester groups on either side of the β-Keto ester are also shown.

learn more about Stoichiometry Refer: https://brainly.com/question/30215297

#SPJ11

The equilibrium constant (K) for the reaction catalyzed by phosphoglucomutase can be calculated using the formula:

ΔG° = -RTlnK

Where ΔG° is the standard free energy change (-7.1 kJ/mol in this case), R is the gas constant (8.314 J/mol*K), and T is the temperature in Kelvin (37°C = 310 K).

Solving for K, we get:

K = e^(-ΔG°/RT) = e^(-(-7.1*10^3)/(8.314*310)) = 0.075

To calculate ΔG at 37°C when the concentration of glucose-1-phosphate is 1 mM and the concentration of glucose-6-phosphate is 25 mM, we can use the formula:

ΔG = ΔG° + RTln(Q)

Where Q is the reaction quotient, calculated as [glucose-6-phosphate]/[glucose-1-phosphate]. Substituting the values, we get:

Q = [glucose-6-phosphate]/[glucose-1-phosphate] = 25/1 = 25

ΔG = -7.1*10^3 + 8.314*310*ln(25) = 5.5*10^3 J/mol = 5.5 kJ/mol

Since ΔG is positive, the reaction is not spontaneous under these conditions.

Therefore, the equilibrium constant for the reaction is 0.075 and the reaction is not spontaneous under the given concentrations of glucose-1-phosphate and glucose-6-phosphate at 37°C.

#SPJ11

Learn more about equilibrium constant: https://brainly.com/question/3159758

Answer: Polar Covalent bonds is an unequal sharing of electrons and Non-Polar Covalent Bonds are an equal sharing of electrons.

Explanation: In polar covalent bonds, we can have partial charges, meaning one element is slightly more negative/positive than the other. Non-polar covalent bongs is when there is no partial charges and usually occur between the same elements. For example Cl-Cl bonds.

The lattice energy (∆Hlattice) is the energy required to separate one mole of an ionic compound into its gaseous ions. Generally, the lattice energy increases with increasing ionic charge and decreasing ionic radius.

Lattice energy refers to the energy required to separate an ionic compound into its individual ions in the gas phase.

a. BaO [">"] Na2O
Explanation: BaO has a larger lattice energy than Na2O because Ba has a higher charge (+2) compared to Na (+1), leading to a stronger electrostatic attraction between the ions.

b. MgCl2 [">"] KCl
Explanation: MgCl2 has a greater lattice energy than KCl because Mg has a higher charge (+2) compared to K (+1), leading to a stronger electrostatic attraction between the ions.

c. SrO [">"] RbF
Explanation: SrO has a larger lattice energy than RbF because Sr has a higher charge (+2) compared to Rb (+1), and O has a higher charge (-2) compared to F (-1). This results in a stronger electrostatic attraction between the ions in SrO.

d. NaBr ["<"] BeS
Explanation: NaBr has a smaller lattice energy than BeS because Be has a higher charge (+2) compared to Na (+1), and S has a higher charge (-2) compared to Br (-1). This results in a stronger electrostatic attraction between the ions in BeS.

Learn more about ionic compound here: brainly.com/question/3222171

#SPJ11

a. Molecular equation: CoCl₃(aq) + 6KCN(aq) → K₃[Co(CN)₆](aq) + 3KCl(aq)

   Net-ionic  equation: Co₃+(aq) + 6CN-(aq) → [Co(CN)₆]³⁻(aq)

b. Molecular equation: NiF₂(s) + 4NaF(aq) → Na₄[NiF₄](aq) + 2Na⁺(aq)
   Net-ionic equation: Ni²⁺(aq) + 4F⁻(aq) → [NiF₄]²⁻(aq)

c. Molecular equation: Al(NO₃)₃(s) + 6NaBr(aq) → Na₃[AlBr₆](aq) + 3NaNO₃(aq)
   Net-ionic equation: Al³⁺(aq) + 6Br⁻(aq) → [AlBr₆]³⁻(aq)

a. Aqueous cobalt(III) chloride reacts with aqueous potassium cyanide to form a soluble complex ion between cobalt(III) and cyanide, with a coordination number of six.

Molecular:
CoCl₃(aq) + 6KCN(aq) → K₃[Co(CN)₆](aq) + 3KCl(aq)

Net-ionic:
Co₃+(aq) + 6CN-(aq) → [Co(CN)₆]³⁻(aq)

b. Solid nickel(II) fluoride is dissolved in the presence of aqueous sodium fluoride by forming a soluble complex ion between nickel(II) and fluoride ion, with a coordination number of four.

Molecular:
NiF₂(s) + 4NaF(aq) → Na₄[NiF₄](aq) + 2Na⁺(aq)

Net-ionic:
Ni²⁺(aq) + 4F⁻(aq) → [NiF₄]²⁻(aq)

c. Solid aluminum nitrate reacts with aqueous sodium bromide to form a soluble complex ion between aluminum ion and bromide ion, with a coordination number of six.

Molecular:
Al(NO₃)₃(s) + 6NaBr(aq) → Na₃[AlBr₆](aq) + 3NaNO₃(aq)

Net-ionic:
Al³⁺(aq) + 6Br⁻(aq) → [AlBr₆]³⁻(aq)

Learn more about coordination numbers at https://brainly.com/question/12498196

#SPJ11

The balanced equation is[tex]3Al(s) + 4NO_3−(aq) + 9OH−(aq) + 6H_2O(l) → 3Al(OH)_4−(aq) + 4NH_3(g)[/tex]

The reactants and products are placed on the left and right sides of the arrow, respectively, to create a balanced equation. Coefficients, which appear as a number before a chemical formula, represent moles of a substance. The number of atoms in a single molecule is indicated by the subscripts (numbers below an atom).

Consider the straightforward chemical reaction Ca + Cl2 CaCl2, for instance. Because both sides of the equation have an equal amount of Ca and Cl atoms, the equation is already balanced. Changing the coefficients—numbers put in front of reactants or products to multiply them—will balance an equation.

to know more about balanced equations here:

brainly.com/question/7181548

#SPJ1

The calculated pH is : 3.367

[HCOONa] = mass/(molar mass * volume)

= 0.65/(68.01 * 0.045)

=0.212 M

[HCOOH] = 0.50 M

Ka = 1.8*10⁻⁴

pKa = -log Ka

= -log (1.8*10⁻⁴)

= 3.74

use:

pH = pKa + log {[conjugate base]/[acid]}

= 3.740+ log {0.212/0.500}

=3.367

hence, when 0.65 g of HCOONa (fw = 68.01 g/mol) is added to 45 ml of 0.50 m formic acid, HCOOH (fw = 46.03 g/mol) the pH is 3.367.

To know more about pH here:

https://brainly.com/question/2288405#

#SPJ11

The mass of CO₂ in a 500 milliliter container of soda assuming that the drink is just CO₂ and water is approximately 0.726 grams.

To calculate the mass of CO₂ in a 500 milliliter container of soda, we need to know the concentration of CO₂ in the drink. However, in the absence of other data, we can make an assumption that the drink is just CO₂ and water.
The solubility of CO₂ in water is dependent on temperature and pressure. At standard atmospheric pressure (1 atm) and room temperature (25°C), the solubility of CO₂2 in water is approximately 0.033 moles per liter.
To convert milliliters to liters, we need to divide 500 by 1000, which gives us 0.5 liters. Therefore, the amount of CO₂ that can dissolve in 0.5 liters of water is:

0.033 moles/L * 0.5 L = 0.0165 moles

The molar mass of CO₂ is 44.01 g/mol, so the mass of CO₂ in 0.0165 moles of CO₂ is:
0.0165 moles * 44.01 g/mol = 0.726 g

Therefore, the mass of CO₂ is approximately 0.726 grams.

Learn more about concentration at https://brainly.com/question/26255204

#SPJ11

For a triprotic acid for with ka1 = 5.5 × 10-3, ka2 = 1.7 × 10-7 and ka3 = 5.1 × 10-12, the value of Kb for the hydrogen phosphate anion, HPO4 2-, is approximately 5.88 × 10^-8, using the ion-product constant for water and the relationship between Ka, Kb, and Kw.

To find the value of Kb for hydrogen phosphate anion, HPO4 2-, we can use the relationship:

Ka x Kb = Kw

Where Kw is the ion product constant of water, 1.0 x 10^-14 at 25°C.

Since phosphoric acid is triprotic, it can donate three protons. The first proton comes off to form H2PO4-, the second proton comes off to form HPO4 2-, and the third proton comes off to form PO4 3-. The values given for Ka1, Ka2, and Ka3 are the acid dissociation constants for these reactions.

For the reaction HPO4 2- + H2O ⇌ H3O+ + PO4 3-, the equilibrium constant expression is:

Kb = [H3O+][PO4 3-] / [HPO4 2-][H2O]

We can use the relationship between Ka and Kb to find the value of Kb:

Ka x Kb = Kw

Kb = Kw / Ka

Since we want to find the Kb for HPO4 2-, we need to use Ka2, which corresponds to the reaction HPO4 2- + H2O ⇌ H3O+ + HPO4 2-. Plugging in the given values, we get:

Kb = (1.0 x 10^-14) / (1.7 x 10^-7)

Kb = 5.88 × 10^-8

Learn more about acid dissociation here:

brainly.com/question/15012972

#SPJ11

False. Molar solubility is the number of moles of solute that can dissolve in one litre of solvent, while solubility in g/L is the amount of solute that can dissolve in one litre of solvent.

The statement "molar solubility is always equal to the solubility in g/l" is false. Molar solubility refers to the maximum number of moles of a solute that can dissolve in a litre of solution, while solubility in g/l refers to the maximum amount of solute (in grams) that can dissolve in a litre of solution. These two values are related but not equal, as they depend on the molar mass of the solute. The two values are related, but not always equal, as they depend on the molar mass of the solute.

Learn more about Molar solubility here: brainly.com/question/28170449

#SPJ11

In this procedure, the production of sulfuric acid (H2SO4) is around 81.82%.

I'd be happy to help you calculate the percent yield of sulfuric acid (H2SO4) in this case. To calculate the percent yield, you'll need the actual yield and the theoretical yield. Here's a step-by-step explanation:

1. Identify the theoretical yield: In this case, the theoretical yield is given as 3.3 kg.
2. Identify the actual yield: The actual yield is given as 2.7 kg.
3. Use the formula for percent yield: Percent yield = (Actual yield / Theoretical yield) x 100
4. Plug in the values: Percent yield = (2.7 kg / 3.3 kg) x 100
5. Calculate the result: Percent yield = 81.82%

So, the percent yield of the sulfuric acid (H2SO4) in this process is approximately 81.82%.

For more such questions on sulfuric acid , click on:

https://brainly.com/question/10220770

#SPJ11