determine concentration of oh- in a 0.724 m solution of bro- (Kb = 4.0 x 10^-6)

The species that have tetrahedral bond angles are NH₃, CH₃, H₂O, and H₃O. So, four of the species have tetrahedral bond angle.

To determine how many of the following species have tetrahedral bond angles, let's analyze each one: NH₃, BF₃, CH₃, H₂O, and H₃O.

1. NH₃ (Ammonia): Nitrogen has three bonding electron pairs and one lone pair, resulting in a tetrahedral electron pair geometry. The bond angle is approximately 107°, which is close to the ideal tetrahedral angle of 109.5°.

2. BF₃ (Boron trifluoride): Boron has three bonding electron pairs and no lone pairs, resulting in a trigonal planar electron pair geometry. The bond angle is 120°, not tetrahedral.

3. CH₃ (Methyl group): Carbon has three bonding electron pairs and one lone pair (unshared electron), which results in a tetrahedral electron pair geometry. The bond angle is approximately 109.5°.

4. H₂O (Water): Oxygen has two bonding electron pairs and two lone pairs, resulting in a tetrahedral electron pair geometry. The bond angle is approximately 104.5°, which is close to the ideal tetrahedral angle of 109.5°.

5. H₃O (Hydronium ion): The central oxygen atom has three bonding electron pairs and one lone pair, resulting in a tetrahedral electron pair geometry. The bond angle is approximately 109.5°.

Out of the given species, NH₃, CH₃, H₂O, and H₃O have tetrahedral bond angles. So, four of the species have tetrahedral bond angles.

Learn more about tetrahedral bond angles: https://brainly.com/question/30765929

#SPJ11

The concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

To answer this question, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

In this case, NH3 is the base (A-) and NH4+ is the acid (HA). The pKa for NH3 is 9.24, so the pKb is 4.74 (pKb + pKa = 14).

Before the addition of HCl, the buffer contains equal amounts of NH3 and NH4+, so [A-]/[HA] = 1. Plugging this into the Henderson-Hasselbalch equation, we can find the pH:

pH = pKa + log(1) = 9.24 + 0 = 9.24

Now let's consider what happens when we add HCl. HCl is a strong acid that will completely dissociate in water, so we can assume that all of the HCl will react with NH3 to form NH4+ and Cl-.

NH3 + HCl → NH4+ + Cl-

To figure out how much NH3 is left in the buffer, we need to first calculate how much NH4+ is formed. The amount of NH4+ formed is equal to the amount of HCl added, since NH3 and HCl react in a 1:1 ratio.

moles of HCl = volume of HCl (in L) x concentration of HCl
moles of HCl = 7.50 mL x (1 L/1000 mL) x 0.125 mol/L = 0.000938 mol

So, 0.000938 mol of NH4+ is formed. This means that the concentration of NH4+ in the buffer has increased by:

Δ[NH4+] = moles of NH4+ formed / total volume of buffer
Δ[NH4+] = 0.000938 mol / 0.1 L = 0.00938 M

Since we started with equal concentrations of NH3 and NH4+, the concentration of NH3 must have decreased by the same amount:

Δ[NH3] = -0.00938 M

Therefore, the new concentration of NH3 in the buffer is:

[NH3] = 0.300 M - 0.00938 M = 0.29062 M

So, the concentration of NH3 in the buffer after the addition of HCl is 0.29062 M.

Know more about Henderson-Hasselbalch equation here:

https://brainly.com/question/13423434

#SPJ11

We need 8.50 g of NaNO₃ to prepare 100 mL of a 1.0 M solution.

The molar mass of NaNO₃ is:

NaNO3 = 22.99 g/mol (Na) + 14.01 g/mol (N) + 3x16.00 g/mol (O) = 85.00 g/mol

To prepare a 1.0 M solution of NaNO₃, we need 1.0 mole of NaNO₃ per liter of solution.

Since we want to prepare 100 mL of solution, we can use the following conversion factor to calculate the amount of NaNO₃ needed:

1.0 mol NaNO₃ / 1000 mL x 100 mL = 0.1 mol NaNO₃

The mass of NaNO₃ needed can be calculated using the molar mass of NaNO₃:

0.1 mol NaNO₃ x 85.00 g/mol = 8.50 g NaNO₃

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

We need 8.50 g of NaNO₃ to prepare 100 mL of a 1.0 M solution.

The molar mass of NaNO₃ is:

NaNO3 = 22.99 g/mol (Na) + 14.01 g/mol (N) + 3x16.00 g/mol (O) = 85.00 g/mol

To prepare a 1.0 M solution of NaNO₃, we need 1.0 mole of NaNO₃ per liter of solution.

Since we want to prepare 100 mL of solution, we can use the following conversion factor to calculate the amount of NaNO₃ needed:

1.0 mol NaNO₃ / 1000 mL x 100 mL = 0.1 mol NaNO₃

The mass of NaNO₃ needed can be calculated using the molar mass of NaNO₃:

0.1 mol NaNO₃ x 85.00 g/mol = 8.50 g NaNO₃

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

Answer:

401.06 grams of HCl from reaction of 5.50 moles of magnesium

Explanation:

Mg(s) + 2HCl(aq) → MgCl2(aq) + H2(g)

5.50 moles Mg × 2 moles HCl/1 mole Mg = 11.0 moles HCl

11.0 moles HCl × 36.46 g/mol = 401.06 g HCl

Answer:

mass of HCl =molar mass of HCl ×moles of HCl

mass of HCl =36.46 g/mol×5 moles

mass of HCl =182.3g

Explanation:

for this, u definitely need a periodic table.

(a) The galvanic cell has a cathode half-reaction of NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)

(b) An anode half-reaction is 3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻

(c) A cell voltage under standard conditions is +0.44 V.

The half-reaction that takes place at the cathode is:

NO₃⁻(aq) + 4H⁺(aq) + 3e⁻ → NO(g) + 2H₂O(l)

The half-reaction that takes place at the anode is:

3Cu⁺(aq) → 3Cu₂⁺(aq) + 3e⁻

To calculate the cell voltage under standard conditions, we can use the standard reduction potentials for each half-reaction. The standard reduction potential for the half-reaction at the cathode is +0.96 V, and the standard reduction potential for the half-reaction at the anode is +0.52 V.

The cell voltage is calculated by subtracting the anode potential from the cathode potential:

E°cell = E°cathode - E°anode

E°cell = (+0.96 V) - (+0.52 V)

E°cell = +0.44 V

Therefore, the cell voltage under standard conditions is +0.44 V.

Learn more about Half-reaction

brainly.com/question/10668307

#SPJ11

It will take approximately 102.8 seconds for the reaction to be 27% complete at the given temperature. Temperature is a numerical value that describes how hot or cold something is physically.

To determine how long it will take for the first-order reaction to be 27omplete at a given temperature, we can use the following equation:
ln([A]t/[A]0) = -kt
Where [A]t is the concentration of the reactant at time t, [A]0 is the initial concentration of the reactant, k is the rate constant, and t is the time elapsed.
In this case, we want to solve for t when [A]t is 27% of [A]0, or:
[A]t/[A]0 = 0.27
Substituting the given values, we get:
ln(0.27) = -2.7 × 10–3 s–1 * t
Solving for t, we get:
t = ln(0.27) / (-2.7 × 10–3 s–1)
t = 93.3 seconds
Therefore, it will take approximately 93.3 seconds for the first-order reaction to be 27omplete at the given temperature.

Learn more about temperature here:

https://brainly.com/question/16771360

#SPJ11

The coefficients in front of NO₃⁻(aq) and Mg(s) when the given redox equation is balanced in an acidic solution are 2 and 1, respectively.

To balance the redox equation in an acidic solution, we need to first determine the half-reactions and balance them separately. Then, we'll combine the balanced half-reactions.

Oxidation half-reaction (Mg to Mg²⁺):
Mg(s) → Mg²⁺(aq) + 2e-

Reduction half-reaction (NO₃⁻ to NO):
2H⁺(aq) + NO₃⁻(aq) + e- → NO(g) + H₂O(l)

Now, to balance the electrons, we multiply the oxidation half-reaction by 1 and the reduction half-reaction by 2:

Oxidation: Mg(s) → Mg²⁺(aq) + 2e-

Reduction: 4H⁺(aq) + 2NO₃⁻(aq) + 2e- → 2NO(g) + 2H₂O(l)

Combining the balanced half-reactions, we get:

Mg(s) + 4H⁺(aq) + 2NO₃⁻(aq) → Mg²⁺(aq) + 2NO(g) + 2H₂O(l)

So, the coefficients in front of NO₃⁻(aq) and Mg(s) are 2 and 1, respectively.

Learn more about redox equation here: https://brainly.com/question/27907895

#SPJ11

The coefficients in front of NO₃⁻(aq) and Mg(s) when the given redox equation is balanced in an acidic solution are 2 and 1, respectively.

To balance the redox equation in an acidic solution, we need to first determine the half-reactions and balance them separately. Then, we'll combine the balanced half-reactions.

Oxidation half-reaction (Mg to Mg²⁺):
Mg(s) → Mg²⁺(aq) + 2e-

Reduction half-reaction (NO₃⁻ to NO):
2H⁺(aq) + NO₃⁻(aq) + e- → NO(g) + H₂O(l)

Now, to balance the electrons, we multiply the oxidation half-reaction by 1 and the reduction half-reaction by 2:

Oxidation: Mg(s) → Mg²⁺(aq) + 2e-

Reduction: 4H⁺(aq) + 2NO₃⁻(aq) + 2e- → 2NO(g) + 2H₂O(l)

Combining the balanced half-reactions, we get:

Mg(s) + 4H⁺(aq) + 2NO₃⁻(aq) → Mg²⁺(aq) + 2NO(g) + 2H₂O(l)

So, the coefficients in front of NO₃⁻(aq) and Mg(s) are 2 and 1, respectively.

Learn more about redox equation here: https://brainly.com/question/27907895

#SPJ11

Delta H is calculated as Delta T = m x s x Delta H, where m is the mass of the reactants, s is the product's specific heat, and Delta T is the temperature change as a result of the reaction.

CO + H2 have temperatures of formation of -110.53 kJ/mol + 0 kJ/mol, which adds up to -110.53 kJ/mol. To calculate delta H, subtract the sum of the reactant temperatures of formation from the product heats of formation: delta H = -110.53 kJ/mol - (-285.83 kJ/mol) = 175.3 kJ.Due to the fact that enthalpy is a state function, Hess's rule enables us to compute the overall change in enthalpy by simply adding the changes for each step up until the creation of the final product.

To know more about Delta H, click here:

https://brainly.com/question/23123877

#SPJ4

The specific heat capacity of a substance that takes 8.3 kJ of heat to warm 229.3 g by 25.6°C is approximately 1.416 J/g°C.

To find the specific heat capacity of a substance, you can use the formula:

Specific heat capacity (c) = Heat energy (Q) / (Mass (m) × Temperature change (ΔT))

Given values are:
Heat energy (Q) = 8.3 kJ = 8300 J (since 1 kJ = 1000 J)
Mass (m) = 229.3 g
Temperature change (ΔT) = 25.6°C

Now, plug in the values and calculate the specific heat capacity:

c = 8300 J / (229.3 g × 25.6°C) = 8300 / (5860.48) = 1.416 J/g°C

The specific heat capacity of the substance is approximately 1.416 J/g°C.

Learn more about specific heat capacity here: https://brainly.com/question/21406849

#SPJ11

The ratio of the product and reactant concentrations in a reversible process is known as the reaction quotient. It is equivalent to the equilibrium constant for equilibrium reactions. Depending on the product and reactant concentrations, it could be more or less than 1. Here the value of ∆G in kJ/mol is 9.90 kJ/mol.

When equilibrium is reached, the reaction quotient Q is equal to the equilibrium constant K. Q may be calculated whether or not a reaction is at equilibrium, unlike K, which is predicated on equilibrium concentrations.

Q and G are connected by the formula G = RTlnQ. To reach equilibrium, the reaction must move to the right if G < 0, since K > Q results.

Here 'Q' = 1 / (pICI) (pCl₂)

Q = 1 / (0.0200)(0.00100)

Q = 1 /0.00002

Q= 50000

∆G = -17.09 + 8.314 × 298 × ln (50000) / 1000

we divide by 1000 to convert the units of R from J/mol·K to kJ/mol·K.

ln(50,000) = 10.82

ΔG = -17.09 kJ/mol + (8.314 * 298 * 10.82) / 1000

ΔG ≈ -17.09 kJ/mol + 26.99 kJ/mol

ΔG = 9.90 kJ/mol

To know more about reaction quotient, visit;

https://brainly.com/question/31829658

#SPJ12

CH₄: NON-POLAR; SO₂: POLAR; CS₂:NON-POLAR; CH₂CI₂:POLAR

To classify each of the given molecules as polar or nonpolar, we need to consider the electronegativity difference between the atoms and the molecular geometry.

CH₄ (methane):

In methane, the carbon atom is bonded to four hydrogen atoms. The electronegativity difference between carbon and hydrogen is relatively small, so the bond between them is nonpolar.

SO₂ (sulfur dioxide):

In sulfur dioxide, the sulfur atom is bonded to two oxygen atoms. The electronegativity difference between sulfur and oxygen is relatively large, so the bonds between sulfur and oxygen are polar.

The molecule has a bent (or V-shaped) geometry with the two oxygen atoms at the ends and the sulfur atom in the center. The two polar bonds are oriented in opposite directions, which results in a net dipole moment. Therefore, the molecule is polar.

CS₂ (carbon disulfide):

In carbon disulfide, the carbon atom is bonded to two sulfur atoms. The electronegativity difference between carbon and sulfur is relatively small, so the bonds between them are nonpolar.

The molecule has a linear geometry with the two sulfur atoms at the ends and the carbon atom in the center.

Since the two sulfur atoms are symmetrical and the bond dipoles cancel each other out, the molecule has a net dipole moment of zero. Therefore, the molecule is nonpolar.

CH₂C₂2 (dichloromethane):

In dichloromethane, the carbon atom is bonded to two chlorine atoms and two hydrogen atoms. The electronegativity difference between carbon and chlorine is relatively large, so the bonds between carbon and chlorine are polar. The molecule has a tetrahedral geometry with the two chlorine atoms and two hydrogen atoms arranged around the central carbon atom.

However, the molecule is not symmetric as the two chlorine atoms are at the opposite sides of the central carbon atom. The bond dipoles do not cancel each other out, and the molecule has a net dipole moment. Therefore, the molecule is polar.

To know more about polarity here:

https://brainly.com/question/3184550#

#SPJ11

The reaction of iso-propyl-benzene with hydrogen (3 mol) using a platinum catalyst under high pressure.

The expected product from this reaction is cumene, also known as iso-propyl-benzene. When iso-propyl-benzene reacts with 3 moles of hydrogen in the presence of a platinum catalyst under high pressure, it undergoes a hydrogenation process.

During hydrogenation, the double bonds within the hydrocarbon chain are reduced, and hydrogen atoms are added. In this case, however, isopropylbenzene already has fully saturated hydrocarbon chains, so no hydrogenation will occur, and the structure of the product will be the same as the reactant.

To summarize, the structure of the expected product from the reaction of iso-propyl-benzene with hydrogen (3 mol), platinum under high pressure, is iso-propyl-benzene or cumene.

To know more about  hydrogenation process :

https://brainly.com/question/30064037

#SPJ11

The protective effect of estrogen-like compounds is likely due to a combination of their effects on estrogen receptors and their antioxidant and anti-inflammatory properties.

Estrogen-like compounds, also known as phytoestrogens, are naturally occurring compounds found in plants that can mimic the effects of estrogen in the body. These compounds have been shown to have a protective effect against various diseases, including cancer, cardiovascular disease, and osteoporosis.

The exact mechanism of the protective effect of estrogen-like compounds is not fully understood, but it is thought to be related to their ability to interact with estrogen receptors in the body. These receptors are present in various tissues, including the breasts, uterus, bones, and cardiovascular system.

When estrogen-like compounds bind to estrogen receptors, they can mimic the effects of estrogen, such as promoting cell growth and differentiation, increasing bone density, and improving lipid profiles. However, unlike estrogen, these compounds have a weaker binding affinity to estrogen receptors, which means that they do not have the same potent effects on the body.

To know more about estrogen here

https://brainly.com/question/8477222

#SPJ4

The chemical formula [VBr(CO)(en)₂] corresponds to a vanadium complex that contains one bromine atom (Br), one carbon monoxide molecule (CO), and two ethylenediamine ligands (en).

To draw all of the isomers for this complex, we need to consider the possible arrangements of these ligands around the central vanadium atom (V).

First, let's start with the geometric isomers. These are also called cis-trans isomers, and they result from different arrangements of ligands around a metal ion that cannot be interconverted by a simple rotation. In other words, if you have a cis isomer and you rotate it, you will end up with a trans isomer.

For [VBr(CO)(en)₂], there are two possible geometric isomers:

1. cis-[VBr(CO)(en)₂]: In this isomer, the two ethylenediamine ligands are adjacent to each other, while the bromine atom and the carbon monoxide molecule are on opposite sides of the central vanadium atom. The term "cis" comes from Latin and means "on this side."

2. trans-[VBr(CO)(en)₂]: In this isomer, the two ethylenediamine ligands are on opposite sides of the central vanadium atom, while the bromine atom and the carbon monoxide molecule are adjacent to each other. The term "trans" comes from Latin and means "across."

Now let's move on to the optical isomers. These are also called enantiomers, and they result from the presence of a chiral center in the molecule, which is a carbon atom or a metal ion that has four different ligands attached to it. In other words, if you have an enantiomer and you try to superimpose it on its mirror image, you will not be able to do so.

For [VBr(CO)(en)₂], there are two possible optical isomers:

1. Λ-[VBr(CO)(en)₂]: In this isomer, the two ethylenediamine ligands are arranged in a clockwise direction around the central vanadium atom. The term "Λ" comes from Greek and means "left-handed."

2. Δ-[VBr(CO)(en)₂]: In this isomer, the two ethylenediamine ligands are arranged in a counterclockwise direction around the central vanadium atom. The term "Δ" comes from Greek and means "right-handed."

In summary, the four possible isomers for [VBr(CO)(en)₂] are:

1. cis-Λ-[VBr(CO)(en)₂]

2. cis-Δ-[VBr(CO)(en)₂]

3. trans-Λ-[VBr(CO)(en)₂]

4. trans-Δ-[VBr(CO)(en)₂]

Learn more about optical isomers: https://brainly.com/question/28295730

#SPJ11

The Meisenheimer Complex is formed during the addition-a. elimination mechanism of SnAr reaction

In nucleophilic aromatic substitution (SnAr) reaction, a nucleophile attacks an aromatic ring, resulting in the formation of a negatively charged intermediate called the Meisenheimer Complex. This complex is stabilized by resonance, allowing for the subsequent elimination of a leaving group to restore aromaticity. The addition-elimination mechanism of the SnAr reaction is distinct from other mechanisms such as the elimination reaction in the Chichibabin reaction.

The Chichibabin reaction involves the generation of an amino group by the direct attachment of a nitrogen nucleophile to an aromatic ring. In contrast, the SnAr reaction entails the formation of the Meisenheimer Complex through the addition of a nucleophile and subsequent elimination of a leaving group. Both reactions involve nucleophilic substitution, but they differ in their specific mechanisms and outcomes. The Meisenheimer Complex is formed during the addition-a. elimination mechanism of SnAr reaction.

Learn more about nucleophile at:

https://brainly.com/question/29910163

#SPJ11

After 10.0 days, approximately [tex]2.63 * 10^8[/tex] radon atoms are left in the sample.

The formula for determining the amount of radioactive material left after a specified period of time is given as follows: Radon-222 decays according to an exponential decay model.

[tex]N(t) = N_o * (1/2)^(^t^/ T^_1_/_2)[/tex]

Where:

N(t) is the remaining amount of the substance at time t

N₀ is the initial amount of the substance

T₁/₂ is the half-life of the substance

t is the elapsed time

Given:

N₀ = [tex]6.00 * 10^8[/tex] radon atoms

T₁/₂ = 3.83 d

t = 10.0 d

When we put the values we get:

N(10) =[tex](6.00 * 10^8) * (1/2)^(^1^0^/^ 3^.^8^3^)[/tex]

N(10) ≈ [tex]2.63 * 10^8[/tex] radon atoms

Hence, after 10.0 days, approximately [tex]2.63 * 10^8[/tex] radon atoms are left in the sample.

Learn more about Radioactive materials, here:

https://brainly.com/question/3274297

#SPJ12

We can see that the pH of the solution at the half-equivalence point in the titration of the weak acid with NaOH is approximately 4.699.

The half-equivalence point in a titration occurs when exactly half of the moles of the weak acid have reacted with the added base. At this point, the concentration of the weak acid and its conjugate base are equal, resulting in a solution that is a buffer. To calculate the pH at the half-equivalence point, we can use the following steps:

Write the balanced chemical equation for the reaction between the weak acid and NaOH:

Weak acid (HA) + NaOH → Salt (NaA) + Water (H2O)

Determine the initial moles of the weak acid:

Given: Moles of the weak acid (HA) = 0.360 moles

Determine the volume of NaOH required to reach the half-equivalence point:

At the half-equivalence point, exactly half of the moles of the weak acid have reacted with NaOH. Since the acid is monoprotic, the moles of NaOH required to reach the half-equivalence point is equal to half of the initial moles of the weak acid:

Moles of NaOH = 0.5 * Moles of weak acid

Moles of NaOH = 0.5 * 0.360 moles

Moles of NaOH = 0.180 moles

Determine the concentration of the weak acid at the half-equivalence point:

At the half-equivalence point, the volume of the solution is assumed to be twice the volume required for the initial titration, since half of the moles of the weak acid have reacted. Let's denote the initial volume of the solution as V0, and the volume at the half-equivalence point as V1.

V1 = 2 * V0

Determine the concentration of the weak acid at the half-equivalence point:

Concentration of weak acid at the half-equivalence point (C1) = Moles of weak acid / Volume at the half-equivalence point (V1)

C1 = 0.360 moles / (2 * V0) (since V1 = 2 * V0)

Determine the concentration of the conjugate base at the half-equivalence point:

Since the weak acid has reacted with exactly half of the moles of NaOH required for complete neutralization, the concentration of the conjugate base (A-) at the half-equivalence point is also 0.180 moles / (2 * V0).

Use the Ka value to calculate the pKa at the half-equivalence point:

pKa = -log(Ka)

Given: Ka = 1.0 x 10^-5

pKa = -log(1.0 x 10^-5)

pKa = 5

Use the Henderson-Hasselbalch equation to calculate the pH at the half-equivalence point:

pH = pKa + log([A-]/[HA])

Substituting the values for pKa, [A-], and [HA]:

pH = 5 + log(0.180 moles / (2 * V0)) / (0.360 moles / (2 * V0))

Simplifying:

pH = 5 + log(0.5)

pH = 5 + (-0.301)

pH = 4.699

Learn more about pH at:

https://brainly.com/question/172153

#SPJ1

When light rays encounter a concave lens, B. The light rays travel through the lens and refract away from the center of the lens.

When light rays encounter a concave lens, they travel through the lens and refract away from the center of the lens.

A concave lens is a diverging lens that is thinner at the center than at the edges. When light rays pass through a concave lens, the lens causes the rays to spread out or diverge, and as a result, the light rays refract away from the center of the lens. This causes the image formed by the concave lens to appear smaller and closer than the actual object.

Find out more on concave lens at https://brainly.com/question/3140453

#SPJ1

When light rays encounter a concave lens, B. The light rays travel through the lens and refract away from the center of the lens.

When light rays encounter a concave lens, they travel through the lens and refract away from the center of the lens.

A concave lens is a diverging lens that is thinner at the center than at the edges. When light rays pass through a concave lens, the lens causes the rays to spread out or diverge, and as a result, the light rays refract away from the center of the lens. This causes the image formed by the concave lens to appear smaller and closer than the actual object.

Find out more on concave lens at https://brainly.com/question/3140453

#SPJ1

For the elementary reaction NO3 + CO ❝ NO2 + CO2 the molecularity of the reaction and the rate law is 2 and k[NO3][CO] respectively. Therefore, the correct option is A) 2, k[NO3][CO]

The quantity of responding molecules that collide simultaneously to produce a chemical reaction is known as the molecularity of a reaction. A chemical reaction's rate and the concentrations of the reactants involved are correlated by an expression known as the rate law, commonly referred to as the rate equation.

The molecularity of the reaction is 2 because there are two reactant molecules involved in the elementary reaction.

The rate law is rate = k[NO3][CO] because the rate of the reaction depends on the concentration of both reactants. Therefore, the correct answer is A) 2, k[NO3][CO].

Learn more about molecularity: https://brainly.com/question/8327819

#SPJ11

When you add ammonia (NH₃) to a solution of zinc nitrate (Zn(NO₃)₂), you will initially observe the formation of a white precipitate, which is zinc hydroxide (Zn(OH)₂). However, as you continue adding ammonia to the solution, the precipitate will redissolve, forming a clear solution.

Upon the addition of phenolphthalein indicator, the solution will not show any color change, indicating that the solution is not basic enough for the indicator to turn pink.

When the solution turns yellow upon the addition of another indicator, it suggests the presence of a moderately basic solution. To estimate the OH⁻ concentration, refer to Table 5 of the Appendix and check the pH range corresponding to the yellow color change of the indicator.

As excess ammonia is added, it forms a complex ion with zinc. Between Zn(OH)₄²⁻ and Zn(NH₃)₄²⁺, the latter forms when Zn²⁺ reacts with an excess of NH₃ solution. This is because the ammonia acts as a ligand, replacing the hydroxide ions and forming a more stable complex ion, Zn(NH₃)₄²⁺. In comparison to Part 2, the formation of this coordination compound showcases the ability of ammonia to form complex ions in a solution containing metal ions.

To learn more about ammonia visit;

https://brainly.com/question/31525313

#SPJ11

Trans-2-butene has the lowest melting point. Out of cis-2-butene and trans-2-butene, trans-2-butene has the lowest melting point.

The temperature at which a pure substance's solid and liquid states can coexist in equilibrium is known as the melting point. A solid's temperature will rise as heat is applied to it until the melting point is reached. The solid will then turn into a liquid with further heating without changing temperature.

Additional heat will raise the temperature of the liquid once all of the solid has melted. It is possible to recognise pure compounds and elements by their characteristic melting temperature, which is a characteristic number. Over a wide range of temperatures, the majority of mixtures and amorphous solids melt.

Visit here to learn more about melting point  : https://brainly.com/question/11024585
#SPJ11

With the aid of an ice table and the acid dissociation constant of nitrogen acid, the pH of a solution containing 0.145 M nitrogen acid and 0.175 M sodium nitrite may be determined. The outcome is roughly 3.17.

The acidity, alkalinity, and neutrality of a solution can all be determined using the pH scale. At 25 °C, a solution with a pH of 7 or less is acidic, one with a pH of 7 or more is neutral, and one with a pH of 7 or more is alkaline.

The pH neutrality relies on temperature, falling below 7 if the temperature rises above 25 °C. The pH value is not limited to zero.

To know more about nitrogen acid  visit:-

https://brainly.com/question/29269334

#SPJ1

The pH of the solution after adding 400.0 mL of 0.10 M KOH to a 100.0 mL sample of 0.20 M HF is 12.60, found by calculating the concentration of H₃O⁺ using stoichiometry and the HF equilibrium equation.

To solve this problem, we can use the concept of stoichiometry and the acid-base equilibrium equation of HF to determine the pH of the solution after the addition of KOH.

First, we can calculate the number of moles of HF in the initial 100.0 mL of 0.20 M HF solution:

n(HF) = (100.0 mL)(0.20 mol/L) = 0.020 mol

Since the stoichiometric ratio between HF and KOH in the neutralization reaction is 1:1, we know that when 0.040 mol of KOH is added to the solution (400.0 mL of 0.10 M KOH), all of the HF will react with the KOH. This means that the remaining KOH in solution after the reaction is 0.040 mol.

Now, we can use the HF equilibrium equation to determine the concentration of HF after the reaction with KOH:

HF + H₂O <-> H₃O⁺ + F⁻

Ka = [H₃O⁺][F⁻] / [HF]

Since we know the initial concentration of HF and the amount of KOH added, we can calculate the new concentration of HF after the reaction using stoichiometry:

n(HF) = 0.020 mol - 0.040 mol = -0.020 mol

Since the amount of KOH added is twice the amount of HF present initially, we can assume that all the HF has reacted with the KOH, leaving us with 0.040 mol of excess KOH. The number of moles of F⁻ produced from the reaction can be calculated as 0.040 mol (since HF and KOH react in a 1:1 stoichiometric ratio), and we can use this to calculate the concentration of F-:

[F⁻] = n(F⁻) / V = 0.040 mol / (100.0 mL + 400.0 mL) = 0.080 M

Now, we can substitute the concentrations of HF and F- into the equilibrium equation for HF and solve for the concentration of H₃O⁺:

Ka = [H₃O⁺][F⁻] / [HF]

[H₃O⁺] = Ka x [HF] / [F-] = (3.5 x [tex]10^-^4[/tex]) x (0.020 mol / 0.080 M) = 8.75 x [tex]10^-^5[/tex] M

Finally, we can use the pH formula to calculate the pH of the solution:

pH = -log[H₃O⁺] = -log(8.75 x [tex]10^-^5[/tex]) = 12.60

Therefore, the pH of the solution after the addition of 400.0 mL of 0.10 M KOH is 12.60.

An ICE table can be used to solve acid-base equilibrium problems, but in this case, since all of the HF reacts with KOH, we can use stoichiometry to determine the new concentration of HF and the excess KOH remaining in solution after the reaction. We subtract the amount of KOH added (0.040 mol) from the amount of HF initially present (0.020 mol) to determine the new concentration of HF.

Learn more about Stoichiometry

brainly.com/question/28780091

#SPJ11

In size exclusion chromatography, the stationary phase consists of porous beads that allow smaller molecules to enter the pores, while larger molecules cannot fit and instead flow around the beads.In gel electrophoresis, the movement of molecules is based on their charge and size.

Therefore, the larger molecules elute fastest as they do not interact with the stationary phase and are not slowed down by the pores.
In gel electrophoresis, the movement of molecules is based on their charge and size. Smaller molecules can move through the gel matrix more easily and therefore migrate further and faster. Additionally, larger molecules experience more resistance from the gel matrix and are slowed down, leading to a slower migration rate.
In size exclusion chromatography (SEC), big molecules elute faster because they are too large to enter the pores of the stationary phase (usually a porous gel). As a result, they bypass the pores and flow more directly through the column, reaching the end of the column faster than smaller molecules.
On the other hand, in gel electrophoresis, small molecules migrate further and faster because they can more easily navigate through the gel matrix. The gel has a mesh-like structure, and smaller molecules can pass through the spaces more easily than larger molecules. Additionally, electrophoresis relies on an electric field to separate molecules based on their size and charge. Smaller molecules experience less resistance from the gel matrix, allowing them to move faster towards the opposite electrode.
In summary, the difference in migration speed is due to the way molecules interact with the stationary phase or gel matrix in each technique - big molecules bypass pores in size exclusion chromatography, while small molecules navigate more easily through the gel matrix in gel electrophoresis.

learn more about electrophoresis here

https://brainly.com/question/28709201

#SPJ11

A. Addition reaction of alkenes:
Ethene reacts with hydrogen bromide to form alkyl bromide.

C2H4 + HBr ---→  C2H5Br

Step-by-step explanation:
1. Alkene reacts with HBr.
2. The H atom adds to the less substituted carbon, and the Br atom adds to the more substituted carbon, following the anti-Markovnikov rule.
3. The major product is an alkyl bromide.

B. Hydrogenation using (Pt, Lindlar's cat., Na/NH3(l)):
Alkyne reacts with hydrogen in presence of a Pt catalyst.

C2H2 + H2 ---→  C2H6 (alkane) complete reduction.
Alkyne reacts with hydrogen in presence of Lindlar's cat., Na/NH3.

C2H2 + H2 ---→  C2H4 (alkene) partial reduction.

Step-by-step explanation:
1. Alkyne reacts with hydrogen gas (H2) in the presence of a platinum catalyst and forms ethane (a major product) by complete reduction.

2. Alkyne reacts with hydrogen gas (H2) in the presence of Lindlar's catalyst to form ethene (a major product) by the syn-addition of H-atoms.

3. Alkyne reacts with hydrogen gas (H2) in the presence of Na/NH3 catalyst to form ethene (a major product) by anti-addition H-atoms.

C. Addition reaction of alkynes (excluding hydrogenation):
Addition of 2 moles of HCl to ethene.

C2H2 + 2HCl ---→  C2H4Cl2

Here, both the chlorine atoms go to one carbon atom forming geminal dihalide.

H3C---CHCl2

Step-by-step explanation:
1. Alkyne reacts with two equivalents of HCl.
2. The first H atom adds to the less substituted carbon, and the first Cl atom adds to the more substituted carbon.
3. The second H atom and Cl atom add to the same carbons as the first set, forming a geminal dihalide.
4. The major product is geminal dihalide.

https://brainly.com/question/31485422

#SPJ11

The critical radius (r*) when ice homogeneously nucleates at -40°C is approximately 1.61 × 10^(-10) meters.

The critical radius (r*) is a parameter in the theory of nucleation that represents the size of the nucleus at which the transition from the liquid phase to the solid phase (e.g., ice formation) becomes thermodynamically favorable. It can be calculated using the following equation:

r* = - (2 * γ) / ΔH

Given values are:
(Latent Heat of Fusion) ΔH = -3.1 × 10^8 J/m^3
(Surface Free Energy) γ = 25 × 10^(-3) J/m^2

Now, let's substitute the given values into the formula:

r* = - (2 * 25 × 10^(-3) J/m^2) / (-3.1 × 10^8 J/m^3)

r* = (50 × 10^(-3) J/m^2) / (3.1 × 10^8 J/m^3)

r* ≈ 1.61 × 10^(-10) m

To know more about Critical Radius:

https://brainly.com/question/15264212

#SPJ11

Indigo can be used for fabric dye. Crystal Violet can be used as a fabric dye and stain in microbiology

The possible uses for each:

a. Fabric dye -Indigo and Crystal violet are commonly used as fabric dyes due to their vibrant colors and ability to bind to fabric fibers, creating long-lasting and colorfast dyeing effects.
b. Stain in microbiology - Crystal violet is also commonly used as a stain in microbiology to dye bacterial cells for microscopic examination. It is often used in Gram staining, a common laboratory technique used to differentiate bacterial species based on their cell wall characteristics.
c. Disinfectant - Indigo and Crystal violet are not typically used as disinfectants
d. pH indicator - Neither Indigo nor Crystal Violet is typically used as a pH indicator.

To know more about Fabric Dyes:

https://brainly.com/question/31322312

#SPJ11

In the stratosphere, ultraviolet (UV) solar radiation is the primary type that is absorbed AND protects life on Earth by filtering out harmful UV rays.

The type of solar radiation that is absorbed in the stratosphere is primarily ultraviolet radiation. This is important because the ozone layer, which is located in the stratosphere, absorbs much of this harmful radiation before it can reach the Earth's surface.
In the stratosphere, ultraviolet (UV) solar radiation is the primary type that is absorbed. This absorption occurs mainly due to the presence of ozone, which protects life on Earth by filtering out harmful UV rays.\

To know more about solar radiation click here:

brainly.com/question/16525532

#SPJ11

The correct answer is B.Use partial charges to indicate the bond polarity of each bond B-F > C-F > N-F δ+δ- δ+δ- δ+δ-

The ionic character of a bond is determined by the electronegativity difference between the two atoms involved. A larger electronegativity difference results in a more ionic bond. In this case, we are comparing B-F, C-F, and N-F bonds.

The electronegativities of the elements are as follows:
Boron (B) = 2.04
Carbon (C) = 2.55
Nitrogen (N) = 3.04
Fluorine (F) = 3.98

Electronegativity differences:
B-F = 3.98 - 2.04 = 1.94
C-F = 3.98 - 2.55 = 1.43
N-F = 3.98 - 3.04 = 0.94

Since a higher electronegativity difference correlates with a more ionic bond, the order is B-F > C-F > N-F, and the partial charges are δ+δ- for each bond.

Learn more about bond here:

https://brainly.com/question/29667007

#SPJ11