dentify two positive feedbacks that would influence the earth’s climate and explain how each one works. use 4-6 sentences for your response.

Answers

Answer 1

Two examples of positive feedback mechanisms that can influence the Earth's climate are ice-albedo feedback and water vapor feedback.

The ice-albedo feedback occurs when the Earth's temperature increases, causing ice and snow to melt. As the ice and snow melt, the Earth's surface becomes less reflective (lower albedo), and more heat is absorbed, further increasing the temperature. This process continues until a new equilibrium is reached, where less ice and snow cover remains on the surface.

The water vapor feedback occurs when the Earth's temperature increases, causing more water to evaporate from the surface into the atmosphere. As water vapor is a greenhouse gas, it traps more heat in the atmosphere, further increasing the temperature. This process continues until a new equilibrium is reached, where more water vapor remains in the atmosphere.

Learn more about Earth's temperature:

https://brainly.com/question/27323988


Related Questions

Which of the following methods of transportation will result in the best degree of sorting? A. Wind B. Glaciers C. Streams D. Waves on a beach.

Answers

Answer:

C. Streams.

Streams are able to sort sediment and particles by size and weight through the process of hydraulic sorting. As water flows in a stream, it exerts different amounts of force on particles depending on their size and weight. Heavier and larger particles settle out first, while lighter and smaller particles remain suspended in the water for longer distances. Over time, this sorting process results in distinct layers or beds of sediment, with the largest and heaviest particles found in the bottom layer, and the smallest and lightest particles found in the top layer.

While wind, glaciers, and waves on a beach can also sort sediment, they are generally not as effective as streams. Wind can sort particles by size to some degree, but it is not as effective as streams because it cannot exert the same amount of force on particles as water. Glaciers can sort particles by size and weight, but the process is slow and generally not as well-defined as in streams. Waves on a beach can sort particles by size, but their sorting ability is limited by the constant mixing and movement of sediment caused by the waves.

Southern California beaches in winter typically are narrow and rocky. That is because .heavy winter wave activity moves the sand out to the longshore bar and uncovers the rocks underneath the sand (true or false)

Answers

True. Southern California beaches in winter experience heavy wave activity which causes the sand to move out towards the longshore bar. This exposes the rocks underneath the sand, resulting in narrower and rockier beaches during this time.

The seasonal changes in Southern California beaches are due to a combination of factors, including changes in wave energy and storm activity, tides, and sediment supply. During the summer months, the waves are typically smaller and less powerful, and the beach tends to be wider and sandier. This is because the wave energy is lower and the sediment supply from rivers and creeks is higher, leading to more sand being deposited on the beach. In contrast, during the winter months, the waves are larger and more powerful, and storms can generate significant erosion and sediment transport. The wave energy can move sand offshore, exposing rocks and other hard substrate. This can create more rocky tide pools, which are important habitats for a variety of marine organisms. The seasonal changes in Southern California beaches are not only important for the ecosystem but also for recreational activities such as surfing, swimming, and beachcombing. Understanding these seasonal patterns can help beachgoers stay safe and enjoy the beach in different ways throughout the year.

Learn more about waves here:

https://brainly.com/question/25954805

#SPJ11

Do you think planted forests are sustainable in the long run? Give reason to support your answer

Answers

In the long run, planted forests can be sustainable if they are managed properly. The viability of planted forests is influenced by a number of variables, including species selection, management techniques, and the socioeconomic environment in which they are developed.

The advantages of planted forests include the production of wood products, the storage of carbon, and the preservation of biodiversity. However, the following aspects need to be considered in order to guarantee the survival of these forests:

1. Selection of species: The viability of newly planted forests over the long term is greatly influenced by the selection of species. The species shouldn't harm the nearby natural ecosystems and should be suitable to the area's soil types and climatic conditions.

2. Management techniques: To promote the growth of healthy and productive forests, appropriate management techniques including as thinning, pruning, and harvesting should be used. These procedures should be followed in a way that minimises the detrimental effects on biodiversity, water resources, and soil quality.

3.Socioeconomic Context: When establishing planted forests, local populations' needs and goals should be taken into consideration. All stakeholders should equitably share in the advantages of these forests, and they shouldn't be planted at the detriment of nearby populations or ecological systems.

In conclusion, planted forests have a lot to offer society and the environment in the long term if they are built and managed sustainably.

To know more about renewable resources refer here:

brainly.com/question/19604560

which modern continents do not show evidence of glaciation during the paleozoic?

Answers

During the Paleozoic era, the continents that do not show evidence of glaciation are Europe and Asia.

During the Paleozoic era, which lasted from 541 million to 252 million years ago, there were five major glaciations. However, not all modern continents show evidence of glaciation during this time period.

For example, Africa and South America did not show evidence of glaciation during the Paleozoic. This is due to their position on the planet and their proximity to the equator. The equatorial regions tend to be warmer and do not experience the same level of glaciation as the poles or higher latitudes.

On the other hand, continents like Antarctica and parts of Australia were covered in ice during the Paleozoic due to their location at the South Pole. North America and Europe also experienced significant glaciation during this time period.

Overall, the evidence of glaciation during the Paleozoic can vary by region and is influenced by a variety of factors including latitude, geography, and climate.

Learn more about glaciation here: brainly.com/question/7357970

#SPJ11

describe the rock in the attached 3d model. this is limestone, a type of sedimentary rock. how is it different from the granite you explored?

Answers

The sediment rocks includes the limestone that is formed by the calcium or carbonate calcium. The difference between lime stone and granite is the capability to observe.

The limestone is composed by calcium and magnesium and all the minerals, whereas the granite is the hard stone that is composed of the igneous rock and other materials like biotite. The limestones and granite are mostly found on the earth's crust that are naturally strong and which are found naturally on the earth's crust. The main difference between the limestone and the granite is the power to observe the elements such as water are heat from the earth's crust.

The limestone has the greater capacity to observe the elements compared to granite. The limestone is the example for the sediment rocks whereas the granite is an igneous rock which has rich quartz and also it helps the earth's crust to cool down compared to other rocks. The rocks are formed because of the weathering of different particles and elements of the earth's crust.

To know more about the sediment rocks, difference between limestone and granite follow the link:

https://brainly.com/question/29513482

#SPJ4

The complete question is What is the difference between limestone and granite, also describe the rocks which are formed from the sediment rock?

explain the difference between explain the difference between relative plate velocity and absolute plate velocity along the western north american plate boundary.

Answers

Answer:

Explain the difference between relative plate velocity and absolute plate velocity along the western North American plate boundary

Relative plate motion describes the motion of one tectonic plate relative to another. Absolute plate motion describes the motion of one plate relative to a fixed reference system. Plate motion can be described by a pole of rotation and an angular velocity about this pole.

Can the star’s changing in the sky be explained by the rotation of Earth on its axis
OR the revolution/orbit of the Earth around the sun? Explain how.

Answers

Yes, the changing positions of stars in the sky can be explained by the rotation of the Earth on its axis and the revolution/orbit of the Earth around the Sun. As the Earth rotates on its axis, different parts of the Earth face towards different parts of the sky, causing the apparent movement of stars across the night sky. The stars appear to move from east to west due to the Earth's rotation from west to east.

On the other hand, as the Earth orbits around the Sun, the stars that are seen in the night sky appear to shift slowly over time, due to the changing position of the Earth relative to the stars. This causes some stars to be seen in different parts of the sky at different times of the year, which is why the constellations visible in the night sky change over the course of a year.

In summary, the rotation of the Earth on its axis causes the daily movement of stars across the sky, while the revolution/orbit of the Earth around the Sun causes the yearly changes to the night sky.

The desalination method that is done by forcing seawater against a semi permeable membrane at high pressure is called:
a. high pressure desalination.
b. distillation.
c. freezing.
d. reverse osmosis desalination.

Answers

The answer is D reverse osmosis desalination

The maximum of each species that can be caught without negatively influencing future populations of that species is called the:
a. maximum sustainable yield.
b. annual catch.
c. maximum global landing.
d. maximum global harvest.

Answers

The correct answer to the given question is a. maximum sustainable yield.

This term refers to the maximum amount of a species that can be harvested without depleting the population beyond its capacity to replenish itself. It is important to manage fishing and hunting practices in a way that maintains the maximum sustainable yield to ensure the long-term health and survival of the species. The terms "maximum global landing" and "maximum global harvest" are not commonly used in this context. The term you are referring to is called the "maximum sustainable yield" (MSY). It represents the utmost quantity of a species that can be harvested from a population without surpassing its ability to naturally replenish itself. Ensuring the long-term viability and survival of the species requires effective management of fishing and hunting practices, adhering to the principles of MSY. The terms "maximum global landing" and "maximum global harvest" are not commonly employed in this specific context, as MSY primarily focuses on maintaining a balance between exploitation and conservation to sustainably utilize natural resources.

To know more about yield please visit:

https://brainly.com/question/2506978

#SPJ11

Pls help me construct a multiple line graph thank you

Answers

If you're looking to create a multiple line graph, simply follow the steps below:

The Steps

Firstly, choose the data sets you want to plot. Analyze each of these datasets and determine how they should be represented on the graph. Afterwards, construct a table with the data that must be illustrated; with each row exhibiting a designated timeframe/category and every column symbolizing an individual dataset.

Subsequently, select a graphing software - Excel, G o o g le Sheets, or R are all popularly used alternatives - that can fabricate s uch charts. Next, input the data from the previously composed table into this chosen system, picking 'multiple line graph' as the chart type.

Once the fundamental inputs have been established, personalize and beautify the graph; incorporating titles, labels, and styling to your liking. After verifying the correctness of the graph and making any required amendments, finalize it by saving it as an image or shipping it off as a distinguishable file.

Read more about multiple line graph here:

https://brainly.com/question/26233943

#SPJ1

outline the negative impact of drought on td​

Answers

The negative impact of drought is that it brings about encouragement of disease infestation in certain crops as well as exerts additional socioeconomic and health burdens.

What is a negative impact of droughts?

Drought can  can be seen as one that that could bring about the scenerio where there would be a limit as regards the growing season which do bring about the creation of the conditions  that can fasten the action of insect and disease infestation in certain crops.

It should be noted that the dought can bring about the Low crop yields  which may result to the rising food prices and shortages as well as leading to malnutrition.

Learn more about drought at:

https://brainly.com/question/26751675

#SPJ1

Hot spots have helped define the outlines of the continents by:
Multiple Choice
1- shaping the boundaries along which continents separate, due to location of the rift arms
2- "welding" continents together due to rising magma bodies and eruptions of lava
3- melting the edges of continents away to form indentions along the coast

Answers

Hot spots have helped define the outlines of the continents by shaping the boundaries along which continents separate, due to location of the rift arms.

Hot spots have helped define the outlines of the continents by:
1- shaping the boundaries along which continents separate, due to the location of the rift arms.
This occurs because hot spots, which are areas of intense volcanic activity, can create rifts and fractures in the Earth's crust. As these rifts grow, they can eventually lead to the formation of boundaries that define the edges of continents.

Learn more about formation of boundaries here:

https://brainly.com/question/15046052

#SPJ11

Hot spots have helped define the outlines of the continents by shaping the boundaries along which continents separate, due to location of the rift arms.

Hot spots have helped define the outlines of the continents by:
1- shaping the boundaries along which continents separate, due to the location of the rift arms.
This occurs because hot spots, which are areas of intense volcanic activity, can create rifts and fractures in the Earth's crust. As these rifts grow, they can eventually lead to the formation of boundaries that define the edges of continents.

Learn more about formation of boundaries here:

https://brainly.com/question/15046052

#SPJ11

In elections, Republicans have a slight persistent advantage over Democrats because Republicans have been more willing to gerrymander. Republicans have gerrymandered more effectively, Democratic voters tend to live in concentrated areas. None of these are correct. Democratic voters tend to be scattered across the country,

Answers

It is important to note that gerrymandering is a controversial practice that involves manipulating the boundaries of electoral districts to favor one political party over another. While it is true that Republicans have been accused of gerrymandering more often than Democrats, it is not necessarily the case that this gives Republicans a persistent advantage over Democrats in elections.

In fact, the idea that Democrats tend to live in concentrated areas is a misconception. In reality, Democratic voters are scattered across the country, and there are many areas where they outnumber Republican voters. However, due to the way that districts are often drawn, these concentrations of Democratic voters are often split up into multiple districts, diluting their overall voting power.

Furthermore, it is important to recognize that gerrymandering is not the only factor that can influence election outcomes. Other factors, such as voter turnout, campaign funding, and changing demographics, can also have a significant impact on election results.

Overall, it is important to approach the issue of gerrymandering and electoral advantages with a critical eye and to consider a range of factors that may be influencing election outcomes.

Know more about gerrymandering here:

https://brainly.com/question/29550779

#SPJ11

How warm does the water temperature (degrees Fahrenheit) have to be in order for you to swim in the ocean along the Mid-Atlantic coast? Be sure that you understand how water temperatures vary throughout the year for beaches in the in this region before answering the question. To receive credit you must provide a specific and realistic temperature (F), not a range of temperatures.

Answers

The water temperature have to be about 70°F in order for one to swim in the ocean along the Mid-Atlantic coast

What is the water condition along the Mid-Atlantic coast

Water temperatures in along the Mid-Atlantic coast oscillate extensively throughout the year, but typically reach peak warmth by summertime. Historical data and usual beach conditions on this shoreline advocate for a reasonable oceanic temperature for swimming about 70°F (21°C) or above.

June, July, and August normally usher in sea temps to teh mid- to high-70s°F (24-26°C), which can easily be higher with heatwaves or near shallow coastal areas. This temperature range is usually fit for swimming for most individuals.

Learn more about swimming at

https://brainly.com/question/11108796

#SPJ1

explain the difference between relative plate velocity and absolute plate velocity along the western north american plate boundary.

Answers

Answer:

Relative plate motion describes the motion of one tectonic plate relative to another. Absolute plate motion describes the motion of one plate relative to a fixed reference system.

Explanation:

While the movement of nearby plates has an impact on relative plate velocity, the movement of the entire planet, including the mantle, has an impact on absolute plate velocity.

Multiple tectonic plates interact along the western North American plate boundary, making it a complicated border. A convergent border along the west coast of North America is the result of the Pacific Plate advancing northward in relation to the North American Plate.

The movement of one plate in relation to another is referred to as relative plate velocity. The Pacific Plate is migrating northward compared to the North American Plate in the case of the western North American plate border, with a relative plate velocity between the two plates of roughly 50 mm per year.

The movement of a plate with respect to a fixed location in the mantle is referred to as absolute plate velocity. The Pacific Plate is moving to the northwest in relation to a fixed point in the mantle at an absolute plate velocity of roughly 100 mm per year in the western North American plate border.

Although they are connected, absolute plate velocity and relative plate velocity are not the same.

To know more about Tectonic Plates,

https://brainly.com/question/838446

Describe how the motion of the Earth, moon, and sun makes a solar
eclipse possible.

Answers

Explanation: A solar eclipse happens when the Moon passes between the Sun and Earth, casting a shadow on Earth that either fully or partially blocks the Sun's light in some areas. This only happens occasionally, because the Moon doesn't orbit in the exact same plane as the Sun and Earth do.

Which country was among the top Asia Pacific offshore locations for outsourcing in 2019?a. North Koreab. Indiac. Nepald. Japan

Answers

The correct answer is (b)India. India was among the top Asia Pacific offshore locations for outsourcing in 2019.

India is a popular destination for outsourcing due to its large pool of skilled workers, relatively low labor costs, and favorable business environment. The country has a well-established IT industry with a range of services including software development, IT consulting, and business process outsourcing (BPO). India's success as an outsourcing destination is due in part to its robust telecommunications infrastructure, which allows for efficient communication between outsourcing companies and their clients. Additionally, the Indian government has implemented various policies and initiatives to promote outsourcing and attract foreign investment, such as tax incentives and streamlined regulations. While India faces competition from other countries such as the Philippines, China, and Vietnam, it remains a preferred outsourcing destination for many companies due to its experience, reliability, and cost-effectiveness. In 2019, India was ranked first in the AT Kearney Global Services Location Index, which evaluates countries based on their potential for outsourcing.

Learn more about business process outsourcing (BPO) here:

https://brainly.com/question/18188522

#SPJ11

headlands are the location of diverging wave action, whereas bays receive converging wave action.T/F

Answers

True, headlands are the location of diverging wave action, whereas bays receive converging wave action.

Headlands are the location of diverging wave action, whereas bays receive converging wave action. Headlands are areas that protrude out into the water and experience waves coming from different directions, causing the waves to diverge. Bays, on the other hand, are indentations along the coastline where waves tend to converge, focusing their energy on a smaller area. Tsunamis brought on by earthquakes can move as massive waves in open waters. A tombolo isolates a body of seawater close to the beach, forming a lagoon. Hence, the headlands are the location of diverging wave action, whereas bays receive converging wave action is true.

Learn more about wave action:

https://brainly.com/question/29698034

#SPJ11

features that are created when water dissolves surface and subsurface limestone, like sinkholes, troughs, caverns, natural bridges, and towers, are collectively called

Answers

Features that are created when water dissolves surface and subsurface limestone, like sinkholes, troughs, caverns, natural bridges, and towers, are collectively called karst features.

Karst is a topography formed from the dissolution of soluble rocks such as limestone, dolomite, and gypsum. Water dissolves these rocks over time, creating features such as sinkholes, underground rivers, and caverns. These features are often interconnected and can create complex underground drainage systems.

In addition to sinkholes, troughs, caverns, natural bridges, and towers, other common karst features include disappearing streams, resurgences, and underground lakes. Karst topography is often found in regions with abundant rainfall and soluble rock formations, such as the Yucatan Peninsula in Mexico, the karst regions of China, and the Appalachian Mountains in the eastern United States.

Learn more about dissolves  here:

https://brainly.com/question/2364287

#SPJ11

discuss why China's southern, western, northern, and eastern borders can be seen as potential weaknesses for China in its relations with its neighbors and other foreign countries.

Answers

Answer:

Explanation:

    Starting with China's Northern border, it borders Mongolia and Russia. Mongolia is a sparsely populated and flat nation, while Russia is a nation whom China has rocky relations with. China also has interest in Russian territory North of China which causes tension.

    Next, China's Western border is shared with Central Asian nations as well as India. India and China have had many territorial disputes in the Kashmir region and elsewhere, and are not on the best terms. Also, many of the Central Asian nations are rich in oil, which causes larger nations such as China and Russia to compete over their influence.

    China's Eastern border, although facing the ocean, is surrounded by NATO and American allied nations, who obviously aren't fond of China. Japan, South Korea, and Taiwan form a chain just outside China's coast and all host American military bases. It is also important to note China's interest in the South China sea and their disputes with other nations regarding territorial waters. China imports many important resources through straits controlled by Singapore and Indonesia who are more likely to side with Western powers in the event of a conflict, which causes tension and concerns for the Chinese government.

You are in a spaceship moving very quickly toward Earth. The headlights of your ship emit red light, as observed by you. The people of Earth will observe your headlights to be(a) a color that cannot be determined based on the information given.(b) red, of course, the same color your observe them to be.(c) toward the blue end of the spectrum.(d) toward the infrared end of the spectrum.

Answers

The people of Earth will observe your headlights to be toward the blue end of the spectrum. Therefore, the correct option is C.

If you are in a spaceship moving very quickly toward Earth and your headlights emit red light as observed by you, the people of Earth will observe your headlights to be toward the blue end of the spectrum. This is because of the Doppler effect, which causes light waves to shift in frequency as the source (in this case, your spaceship) moves closer or farther away from the observer (people on Earth).

Doppler effect causes the observed frequency of a wave to change based on the relative motion between the source of the wave and the observer. In this case, as your spaceship is moving towards Earth, the wavelengths of light emitted from your headlights will be compressed, causing them to shift towards the blue end of the spectrum for observers on Earth.

Hence, as your spaceship moves toward Earth, the frequency of the red light emitted by your headlights will appear to increase, making it shift toward the blue end of the spectrum when observed from Earth. Hence, option C is the correct answer.

Learn more about Doppler effect:

https://brainly.com/question/15318474

#SPJ11

Describe the disputes over water availability and use which can arise from proposals to build dams at sites in pakistan

Answers

Answer:

Explanation:

The construction of dams in Pakistan has been a contentious issue due to disputes over water availability and use. One of the main concerns is the impact on downstream areas, as the construction of a dam may reduce the flow of water downstream, affecting agricultural activities and the livelihoods of people living in those areas. This has led to conflicts between different regions over water sharing, with some regions feeling that they are not receiving their fair share of water. In addition, there have been concerns about the displacement of local communities due to the flooding of their land, as well as the environmental impact of the dam, such as loss of biodiversity and disturbance to natural ecosystems. Furthermore, there have been disputes over the funding and management of dam projects, with some arguing that foreign investment and influence could lead to a loss of control over water resources. All of these factors contribute to the complexity of water availability and use issues in Pakistan and the need for careful consideration and negotiation of proposed dam projects.

PLS MARK ME BRAINLIEST

at the 3-mile mark, the pipe passes over a mountain pass at elevation 1912 ft. the pipe enters the community at elevation 1582 ft

Answers

Based on the information provided, we can determine that the pipe passes over a mountain pass with an elevation of 1912 ft at the 3-mile mark. From there, the pipe enters the community at an elevation of 1582 ft.

A mountain pass is a route through a mountain range that allows for easier transportation between two regions. It is a low point or gap in a mountain ridge that can be crossed by a road, trail, or railway. Mountain passes are often formed by erosion from glaciers or rivers, or by tectonic activity such as the movement of plates. They can be found in many parts of the world and have played a significant role in the history of trade and migration. Mountain passes can be challenging to navigate due to steep grades, narrow roads, and harsh weather conditions, but they also offer stunning vistas and opportunities for adventure and exploration.

Learn more about mountain pass here:

https://brainly.com/question/3568728

#SPJ11

How many cubic inches is 37.20 inches

Answers

37.20 inches is a unit of length or distance, and cannot be directly converted to cubic inches without additional information about the shape and dimensions of the object being measured.

To find the volume of an object in cubic inches, you would need to know its length, width, and height (if it is a rectangular solid), or its radius and height (if it is a cylinder), or some other relevant dimensions depending on the shape of the object.

Understanding banding and layering Let's examine an additional characteristic of metamorphic rocks. The tiny interlocking minerals and crystals form a banding or layering in the medamorphic rock. The technical term for this is referred to as foliation.Select what happens to the minerals and crystals during the process of foliation? O They precipitate out and form a gas. O They precipitate out and form a liquid. O They align in a preferred direction. O They form layers in shallow waters.O They randomly align in cross beds. Score:90.0

Answers

During the process of foliation, the minerals and crystals in the metamorphic rock align in a preferred direction, creating a banding or layering known as foliation.

Foliation is the term for the banding or repeating striping present in metamorphic rocks. A kind of metamorphic material known as foliated rocks develops its layers (or bands) under the pressure of the Earth's interior.When a rock is banded, it has alternating thin layers of two distinct mineral compositions, often ranging in thickness from 1 mm to 1 cm. The same sorts of minerals are typically present in both types of strata, but in differing amounts, giving the stone a striped look.Gneiss Visible silicate minerals split into both light and dark bands or lineations in a process known as gneissic banding. These grains frequently fold and tend to be coarse. Gneiss is a rock that has this texture.Regional metamorphic rocks are also linked to significant volumes of granitic intrusions.

learn more about metamorphic rock here

https://brainly.com/question/15097394

#SPJ11

How can droughts be triggered by: Physical(natural) conditions​

Answers

Droughts can be triggered by changes in atmospheric and oceanic conditions, soil moisture depletion, altered vegetation patterns, land-use changes, deforestation, and urbanization.

How Droughts can be Triggered?

Droughts can be triggered by physical (natural) conditions such as changes in atmospheric pressure patterns, sea surface temperatures, and wind patterns, which can lead to a decrease in precipitation and an increase in evaporation.

Other physical conditions that can trigger droughts include soil moisture depletion, which can occur due to extended periods of high temperatures and low rainfall, as well as changes in vegetation patterns that can exacerbate water scarcity.

Additionally, factors such as land-use changes, deforestation, and urbanization can alter natural water cycles and contribute to drought conditions.

Learn more about droughts on :

https://brainly.com/question/27021741

#SPJ1

Titania, the largest moon of the planet Uranus, has 1/8 the radius of the earth and 1/1700 the mass of the earth.
What is the acceleration due to gravity at the surface of Titania?
What is the average density of Titania? (This is less than the density of rock, which is one piece of evidence that Titania is made primarily of ice.)

Answers

A) The acceleration due to gravity at the surface of Titania is 0.37 m/s2.

B)  The average density of Titania is 1.71 g/cm³ as Titania, the largest moon of the planet Uranus, has 1/8 the radius of the Earth and 1/1700 the mass of the Earth.

We know that gravitational acceleration, g = GM/R2

We know that M = Mass of earth /1700 and R = Radius of earth /8

Hence we get g = 64/1700 times the gravitational acceleration of the earth

I.e. g = 64/1700 x 9.8

= 0.37 m/s2

An object on the outermost layer of another huge object experiences acceleration as a result of gravity. This results from the gravitational attraction between the surface-attached object and the big object.

In the solar system, Uranus is the second least dense planet with a density of 1.27 grams per cubic centimeter. Its low density suggests that ice, rather than gas, makes up the majority of its composition. The term "ice giants" refers to Uranus and Neptune because of their icy composition, which distinguishes them from the heavier gaseous giants Jupiter and Saturn.

To learn more about Acceleration due to gravity, click at:

https://brainly.com/question/13860566

#SPJ4

if manganese nodules accumulate at a rate of 1.5 mm per 1,000,000 years, approximately how long did it take to create a nodule with a radius of 3 cm? (

Answers

It took approximately 75,398,227 years to create a manganese nodule with a radius of 3 cm.

The rate of manganese nodule accumulation is given as 1.5 mm per 1,000,000 years. The radius of the nodule is given as 3 cm. We can convert the radius to millimeters by multiplying it by 10. Thus, the radius of the nodule is 30 mm.

We can use the formula for the volume of a sphere, V=(4/3)πr³, to calculate the volume of the nodule.

V = (4/3)π(30)³

V = 113,097.34 mm³

Next, we can use the formula for the rate of accumulation to calculate the time it took to create the nodule.

1.5 mm = (V/t)

t = V/1.5

t = 75,398,227.14 years

Therefore, a manganese nodule with a radius of 3 cm was formed over a period of around 75,398,227 years.

To know more about manganese nodule, refer here:
https://brainly.com/question/1005399#
#SPJ11

what is the overall thickness (to the nearest 50 ft) of the kayenta formation (red) on the western side of the profile?

Answers

Answer:

At the end of the section, the author added "1 Kayenta is a town within the Navajo reservation in

Arizona." Why was this added at the end of the selection?

This was added to tell the reader where Arizona is in the United States.

This was added to tell the reader where Kayenta is located.

This was added to confuse the reader.

This was added to tell the reader that the Navajo reservation is in California

Explanation:

The velocity profile in a water tunnel was measured on the upstream and downstream sides of an object in order estimate the drag on a stationary object. The velocity profile upstream of the object is u1 = 10 ft/s and the downstream velocity profile is given by

Final answer:

The overall thickness of the Kayenta Formation (red) on the western side of the profile is approximately 550 ft. We can determine this by analyzing the elevation changes between different layers in the profile.

Explanation:

The overall thickness of the Kayenta Formation (red) on the western side of the profile is approximately 550 ft. To determine this, we need to analyze the elevation changes between different layers shown in the profile.

Starting from the bottom, we can see that the Kayenta Formation begins at an elevation of 900 ft and ends at an elevation of about 1350 ft. The difference in elevation is 1350 ft - 900 ft = 450 ft.

However, we also need to take into account the layer immediately above the Kayenta Formation, which has an elevation of about 1900 ft. So, the overall thickness of the Kayenta Formation is 1900 ft - 900 ft = 1000 ft. Rounding it to the nearest 50 ft gives us a final answer of approximately 1050 ft.

Learn more about Overall thickness of the Kayenta Formation here:

https://brainly.com/question/33792207

#SPJ2

1. calculate the difference between the volume of water evaporating from and precipitating onto the oceans.

Answers

The difference between the volume of water evaporating from and precipitating onto the oceans is known as the oceanic water balance. This balance is influenced by a number of factors, including temperature, humidity, wind patterns, and ocean currents.

Generally, the amount of water evaporating from the oceans is greater than the amount of water precipitating onto them, resulting in a net loss of water from the oceans. This loss is compensated for by the flow of water from rivers and groundwater sources into the oceans, which helps to maintain their overall volume. Overall, understanding the complex dynamics of the oceanic water balance is important for predicting and managing the impacts of climate change on global water resources
To calculate the difference between the volume of water evaporating from and precipitating onto the oceans, follow these steps
Step 1: Obtain the volume of water evaporating from the oceans. This information can be found through research or given data. Let's assume the volume of water evaporating is V1.
Step 2: Obtain the volume of water precipitating onto the oceans. This information can also be found through research or given data. Let's assume the volume of water precipitating is V2.
Step 3: Calculate the difference by subtracting the volume of water precipitating (V2) from the volume of water evaporating (V1).

learn more about oceans here
https://brainly.com/question/18577474

#SPJ11

The difference between the volume of water evaporating from and precipitating onto the oceans is known as the oceanic water balance. This balance is influenced by a number of factors, including temperature, humidity, wind patterns, and ocean currents.

Generally, the amount of water evaporating from the oceans is greater than the amount of water precipitating onto them, resulting in a net loss of water from the oceans. This loss is compensated for by the flow of water from rivers and groundwater sources into the oceans, which helps to maintain their overall volume. Overall, understanding the complex dynamics of the oceanic water balance is important for predicting and managing the impacts of climate change on global water resources
To calculate the difference between the volume of water evaporating from and precipitating onto the oceans, follow these steps
Step 1: Obtain the volume of water evaporating from the oceans. This information can be found through research or given data. Let's assume the volume of water evaporating is V1.
Step 2: Obtain the volume of water precipitating onto the oceans. This information can also be found through research or given data. Let's assume the volume of water precipitating is V2.
Step 3: Calculate the difference by subtracting the volume of water precipitating (V2) from the volume of water evaporating (V1).

learn more about oceans here
https://brainly.com/question/18577474

#SPJ11

Other Questions
note the first distillationis an example of stream disillation which characteristics are unique to cervical vertebrae only? choose the best answer. Which measure do you think is more typical of the data? ASAPP RIGHT TOO PLS Rajindri, a physician assistant who works in an emergency room, earns $163 for every two hours that she works.Which equation represents the relationship between d, the number of dollars Rajindri earns, and t, the amount of time Rajindri works, in hours?A. d= 163 + tB. d= 163/2 t/2C. d = 163tD. d = 81.50t Suppose a firm's marginal costs are given by $0.20Q. If this firm can sell all units at a price equal to $80 their profit maximizing quantity would equalQuestion content area bottomPart 1A. 80B. 2000.C.160.D.400. find the linearization of f(x) at x0. how is it related to the individual linearizations of and at x0? What will be the value of charges after the following code is executed?double charges, rate = 7.00;int time = 180;charges = time A quiz has 3 questions. Each question has 4 choices; a, b, c, or d. How many outcomes for answering the three questions are possible? A yield curve that reflects relatively similar borrowing costs for both short-term and long-term loans is called as ________.Select one:a. flat yield curveb. inverted yield curvec. normal yield curved. lognormal curve At t=1.0s, a 0.40 kg object is falling with a speed of 6.0 m/s. At t=2.0s, it has a kinetic energy of 25 J.Part AWhat is the kinetic energy of the object at t=1.0s? IN JOULESPart BWhat is the speed of the object at t=2.0s? in m/sPart CHow much work was done on the object between t=1.0s and t=2.0s? IN JOULES In this problem, p is in dollars and q is the number of units. Suppose that the demand for a product is given by pq + p + 100q = 50,000. (a) Find the elasticity when p = $200. (Round your answer to two decimal places.) (b) Tell what type of elasticity this is. O Demand is elastic. O Demand is inelastic. O Demand is unitary elastic. (c) How would a price increase affect revenue? O An increase in price will result in a decrease in total revenue. An increase in price will result in an increase in total revenue. Revenue is unaffected by price. 1. Eliminate the parameter t to rewrite the parametric equation as a Cartesian equation.x(t)=3t 2y(t)=5t22.Eliminate the parameter t to rewrite the parametric equation as a Cartesian equation.x(t)=e2ty(t)=e4t Look at the map, and think of the challenges the United States faced fighting a war on so many fronts. Write down a question you have about those challenges, and then write down a possible answer. A 27 g block of ice is cooled to 65 C. It is added to 525 g of water in an 80 g copper calorimeter at a temperature of 25C. Find the final temperature. The specific heat of copper is 387 J/kg C and of ice is 2090 J/kg C . The latent heat of fusion ofwater is 3.33 105 J/kg and its specific heat is 4186 J/kg C . Answer in units of C. in an organization with strong control over its sales/collection process, only the accounting department would use: A car travels at a speed of 30m/s when it leaves a ramp set at an angle fo 37 degrees from the ground. How high off the ground will the car reach? What is the maximum height of the gorge could the car clear? The volume of air in a person's lungs can be modeled with a periodic function. Thegraph below represents the volume of air, in ml., in a person's lungs over time t,measured in seconds.What is the period and what does it represent in thiscontext?Volume of air (in ml.)200200019001000300(2.5, 2900)(5-5, 1100)Time (in seconds)(8.5, 2900)(11.5, 1100)11PLEASE ANSWER The current measurements in a strip of wire are assumed to follow a normal distribution with a mean of 10 milliamperes and a standard deviation of 2 milliamperes. 1. What is the 70th percentile of current measurement? 10.97 11.05 10.87 12.09 Connwell was a partner in Piece of America (POA), a company that sold one-square-inch parcels of land in each of the 50 states. The company wanted to sell through a website and contacted Gray Loon Marketing to design and publish a site. Gray Loon gave POA a website design proposal and an estimate price of $8,080. The proposal stated, "It is Gray Loons philosophy that clients have purchased goods and services from us and that inherently means ownership of those goods and services as well." POA agreed, the website was created, and POA paid in full. Several months later, POA asked for several changes, some of which required major programming work. Gray Loon agreed over the phone and began work. When the work was completed, POA said it no longer wanted the changes and did not pay the $5,224.50 bill. After several failed attempts to collect, Gray Loon took the website offline and sued for nonpayment. POA argued the contract was for services, and that under common law, because there was no agreement as to price for the modification, it is not liable. Should the common law be applied to this contract? Explain. Calculate the heat change in joules for melting 12.0 g of ice at 0 C