Consider the reaction
N2 + 3 H2 → 2 NH3 .
How much NH3 can be produced from the reaction of 74.2 g of N2 and 14.0 moles of H2?

The amount of heat needed to melt of solid acetic acid is 32.4 kJ.

Given temperatures are

Heat capacity for acetic acid = 2.06 J/g* °C

The melting point of acetic acid = 16.64 °C

Enthalpy of fusion for acetic acid = 11.73 kJ/mol

Number of moles of acetic acid = 124 g/(60.05 g/mol) = 2.064946 mol

1. Conversion of solid acetic acid at 16.64 °C to liquid acetic acid at 16.64 °C

q1 =m*ΔHf = 2.064946 mol * 11.73 kJ/mol = 24.22182 kJ

2. Conversion of liquid acetic acid at 16.64 °C to gas at 48.7 °C

q2 = m*C*ΔT = 124 g* 2.06 J/g* °C * (48.7 – 16.64 ) °C = 8189.406 J = 8.189406 kJ

Total heat energy required = q1 + q2

= 24.22182 + 8.189406 = 32.41122 kJ

The heat energy required = 32.4 kJ.

The inlet temperature to the heat exchanger at B will be T1. And the output of the heat exchanger coming out at D is T2. The cooling water entering the heat exchanger heats up as it passes through the heat exchanger. q is the amount of heat transferred to the system used to represent the change in enthalpy. Enthalpy is the total potential energy of a system associated with heat transferred to and from the system.

Learn more about Acetic acid here:- https://brainly.com/question/24304533

#SPJ4

The increased trends moving across a row on the periodic table is: the atomic radius generally decreases as we move from left to right. This is affected by the number of electrons each atom contains.

Moving from left to right at the same row, the atomic radius generally decreases. This is because the more to the left, the more electrons each atom has. As they have the same number of shells, the atoms in the further right of the table tend to have a smaller atomic radius.

Learn more about the periodic table here https://brainly.com/question/25916838

#SPJ4

We must first draw the Lewis structure of acetic acid.

(figure attached)

Carbon 1

This atom has four atoms directly attached and no lone pairs.

Its electron geometry and its molecular geometry are both tetrahedral as in methane. (figure attached)

Carbon 2

This atom has three atoms directly attached and no lone pairs.

Its electron geometry and its molecular geometry are both trigonal planar.

Oxygen 3

This atom has two atoms directly attached and two lone pairs.

Its electron geometry is tetrahedral but its molecular geometry is bent as in water. (figure attached)

To know more about Lewis structure

https://brainly.com/question/20300458

#SPJ4

If you forget to add primers to your PCR reaction, the reaction will not work because the primers are necessary for the DNA amplification process.

What are primers?

A primer is a brief sequence of nucleic acids that serve as the precursor to DNA synthesis. Short RNA strands make up primers in living things. Prior to DNA replication, an enzyme called primase, a subtype of RNA polymerase must create a primer.

Because Taq polymerase cannot add bases without an existing piece of DNA, your PCR reaction would fail if you forgot to add the primers. Because there wouldn't be an enzyme that could add additional nucleotide bases, your reaction would not succeed.

To learn more about primers click on the given link:
https://brainly.com/question/14986640
#SPJ4

Atomic radius generally decreases from left to right across a period because the effective nuclear charge Increases while electrons are being added to the same outer level. These additional electrons are shielded less well by inner electrons and are therefore attracted more strongly by the nucleus. .

In the periodic table, atomic radii generally decrease as you move left to right across the period (because the nuclear charge increases) and increase as you move down the group (because the number of electron shells increases).

As the attractive force between the nucleus and the electron increases, the size of the atom decreases. This effect diminishes as you move further to the right within the cycle. This is due to repulsion between electrons that would otherwise cause the atoms to increase in size.

To know more about Periodic table

https://brainly.com/question/11155928

#SPJ4

Taq polymerase can withstand the high temperatures involved in PCR reactions.

A DNA polymerase belongs to a group of enzymes that catalyzing the synthesis of Target dna from nucleoside triphosphates, which are the basic building blocks of DNA. These enzymes, which are necessary for DNA replication, typically function in groups to split a single dna Template duplex into two identical DNA duplexes.

Definition. All living things have DNA polymerase, a particular sort of enzyme. DNA replication and DNA repair and maintenance are its two main goals. The enzyme is essential for passing on genetic information from one generation to the next.

To know more about Polymerase visit:

https://brainly.com/question/29377728

#SPJ4

The relative atomic mass of hydrogen 1.00

The atomic mass of an element is the average mass of the atoms of an element measured in atomic mass unit

Here given data is

99.30% of H atoms

0.70% H atoms

So we have to calculate the relative atomic mass of hydrogen. = ?

So the relative atomic mass = (isotope abundance × isotope mass) + (isotope abundance × isotope mass)

Relative atomic mass = (99.30% × 1) + (0.70% × 1)

Relative atomic mass = 1.00

Know more about hydrogen

https://brainly.com/question/25640729

#SPJ9

Answer: the rock changes color because of the temputure and stays the same because its still a rock...

Explanation:

Arrangement from lowest to highest entropy will be CuO (s) < H₂O (l) < H₂O₂ (l) < H₂O (g)

The dispersed energy of any system is called the entropy of the system. In simple words, this energy cannot be used to perform any activity. As we know that the highest degree of randomness is present in gasses because gas molecules move in the system in a random manner. The degree of randomness is slightly lower in liquids than in gasses because liquid molecules have different forces like hydrogen bonding dipole forces etc. These forces maintain the degree of randomness. In solid substances, the molecules remain in a fixed position so the degree of randomness is almost zero.

So among the given molecules, H₂O has the highest entropy and CuO has the lowest. if Two molecules have the same phase then we will decide according to the molecular formula.

You can also learn about entropy from the following question:

https://brainly.com/question/13146879

#SPJ4

MgCO3⇒ MgO+CO2 is the balance equation reaction.

a. Li+O2⇒ LiO2

b. H2+Cl2⇒ H2Cl2

c.MgCO3⇒ MgO+CO2

d.2NaI+Cl2⇒ 2NaCl+2I

To balance chemical equations, stoichiometric coefficients for the reactants and products are required. This is important because a chemical equation must follow the rules of conservation of mass and constant proportions, which dictate that the same number of atoms of each element must be avail on two of the reactant and product sides of the equation.

Chemical equations use the relevant chemical formulae to symbolically express the reactants and products of a chemical process. To the left of the sign "," and to the right of the arrow symbol, respectively, is the part of the chemical equation that is on the reactant side.

To know more about balance equation visit : brainly.com/question/28949107

#SPJ1

A lot of acids have two or more ionizable hydrogens. In phosphoric acid H3PO4, there are three, and there are two in carbonic acid H2CO3.

A substance that can contribute more than one proton is called polyprotic acid. Two different types of polyprotic acid—diprotic and triprotic—can each donate two or three protons.

Polyprotic acids have different dissociation constants, such as Ka1, Ka2, Ka3, and equivalence points, depending on how frequently dissociation occurs.

Take sulfuric acid as an example of a diprotic polyprotic acid (H2SO4). The sequential deprotonation of sulfuric acid (H2SO4) results in the production of HSO4- and SO42-, respectively.

Take sulfuric acid as an example of a diprotic polyprotic acid (H2SO3). To create HSO3-, sulfuric acid (H2SO3) is sequentially deprotonated.

To know more about polyprotic acids  visit:-

https://brainly.com/question/28605275

#SPJ4

A similarity between the particles in liquid water and the particles in steam is their chemical composition whereas a difference between the particles in liquid water and the particles in steam is their state of matter.

Steam refers to the gas which is formed when water passes from the state of liquid to the gaseous state. Steam is formed when water molecules break the bonds i.e. hydrogen bonds that keep them together while on the other hand, a liquid is a sample of matter that takes the shape of a container in which it is placed. The term liquid is used to show the state or condition of matter.

So we can conclude that chemical composition is the similarity between liquid and steam while on the other hand, the difference in the state of matter.

Learn more about water here: https://brainly.com/question/1313076

#SPJ1

It will form the following: mRNA sequence will be 3' AUG CCA GGG UCG AAU UUC GAA UAG GCC CA 5'.

What is mRNA sequence?

High-throughput sequencing methods are used in RNA sequencing (RNA-Seq) to reveal the transcriptome of a cell. Compared to prior Sanger sequencing- and microarray-based techniques, RNA-Seq provides far greater coverage and better resolution of the dynamic dynamics of the transcriptome. In addition to allowing for the quantification of gene expression, RNA-Seq data also allows for the identification of novel transcripts, the recognition of alternatively spliced genes, and the detection of allele-specific expression.

Recent advancements in the RNA-Seq approach, which entails sample preparation, library building, and data analysis, have allowed researchers to better comprehend the functional complexity of the transcription. In addition to polyadenylated messenger RNA (mRNA) transcripts, total RNA, pre-mRNA, and noncoding RNA, including microRNA and long ncRNA, can all be explored using RNA-Seq.

Learn more about RNA here:

brainly.com/question/25979866

#SPJ1

When samples ca(oh)2 is titrated with HCL, then the concentration of ca(oh)2 is calculated as 0.09M.

In chemistry, neutralization is a chemical reaction in which acid and base react with each other.  During reaction in water, neutralization results in no excess of hydrogen or hydroxide ions present in the solution.

The neutralization of acid and base to identify the strength can be given as:

M1V1= M2V2

Substituting the strength and the volume of calcium hydroxide and the HCl with the volume:

0.030 * 38.1 =  M2 * 25

M2 = 1.143/25

=0.045 M

The strength of the calcium hydroxide in the reaction is 0.045 M.

One molar unit of calcium hydroxide gives 2 molar units of hydroxide;

Therefore, molar unit of hydroxide in 0.045 M calcium hydroxide is:

2 * 0.045 = 0.09 M

The concentration of hydroxide ion in the titration is  0.09M.

To know more about neutralization, refer

https://brainly.com/question/23008798

#SPJ4

The products are AgI and NH4ClO4.

Moreover, Iodide of Pb2+, Ag+ and Hg22+ are insoluble. So, AgI is not soluble Ammonium Salts are soluble. So, NH4ClO4 is soluble.

AgClO4(aq) + NH4I(aq) -> AgI(s) + NH4ClO4(aq)

Ag+(aq) + I-(aq) -> AgI(s)

You can learn more about this at:

https://brainly.com/question/10874844#SPJ4

Answer:

Oxygen is the limiting reagent.

Explanation:

First you must make a chemical equation. Then you will do a mole bridge from the moles of each given substance to a product, you can find how much product each will create. The reactant that creates the least is the limiting reagent. I hope this helps!

On performing the operation, we get 0.72

The operation is 3.0x104/4.0x108=312/432=0.72

To learn more about division visit:

brainly.com/question/21416852

#SPJ1

Answer:

The answer is D

Explanation:

Hope this helps!

Convert moles of  HCl used in the neutralization of the tablet to moles of CaCO3 using the coefficients in the balanced equation. That will be moles of CaCO3 is 0.0005284 moles.

1. CaCO3 + 2HCl ==> CaCl2 + H2O + CO2

Moles of HCl added initially = M x L = 0.002515  moles

Moles of NaOH needed to neutralize the excess HCl = M x L = 0.0014582 moles.

Moles of HCl used for the tablet is

0.002515 - 0.0014582 =  0.0010568 moles

Convert moles of  HCl used in the neutralization of the tablet to moles of CaCO3 using the coefficients in the balanced equation. That will be moles of CaCO3 = (1/2 x moles HCl) = 0.0005284 moles

Mass of CaCO3 = 0.05284g in 1.1990 g tablet

Then in 0.2455 g tablet = 0.0065187 g = 6.5187 mg

2. Both HCl and NaOH are strong acid and  strong bases respectively, an indicator like phenolphthalein is used which can  become colourless in acidic and neutral conditions and pink coloured under alkaline conditions.

To know more about Titration from the given link

https://brainly.com/question/13307013

#SPJ4

Answer:

the correct answer is C.

Explanation:

Zn3(PO4)2 is the chemical formula for Zinc phosphate.

The chemical formula for zinc (II) phosphate is Zn₃(PO₄)₂. Therefore, option C is correct.

Zinc (II) phosphate is an inorganic compound. It is composed of zinc cations (Zn²⁺) and phosphate anions (PO₄³⁻). The Roman numeral "II" in the compound name indicates that the oxidation state of the zinc ion is +2.

Zinc (II) phosphate is a white crystalline solid that is insoluble in water. It is commonly used in various applications, including as a corrosion inhibitor in coatings and paints, as a component in dental cement, and as a nutrient supplement in some fertilizers.

Learn more about Zinc phosphate, here:

https://brainly.com/question/28959000

#SPJ6

Answer:

C.

Explanation:

From the periodic table: Cl has a -1 charge while Ca has a +2

This means that 2 Cl required to make a neutral compound with Ca (ideal)

Regioselectivity is the preference of chemical bonding or breaking in one direction over all other possible, stereospecific mechanism specifies the stereochemical outcome of a given reactant.

Regioselectivity occurs when two possible reaction products are regioisomers. Stereoselectivity exists when two possible reaction products are stereoisomers. Chemoselectivity occurs when a reactant within a substrate prefers one functional group over another. Markovnikov's law predicts the regiochemistry of his HX addition to unsymmetrically substituted alkenes.

The Zaitsev and Hoffman rule describes the principle of regioselectivity in elimination reactions. Regioselective means that the reaction selectively produces one regioisomer as the major product. The two alkenes are positional isomers because the double bonds are in different regions. A process that favors bond formation at certain atoms over other possible atoms.

Learn more about Regioselectivity here:-https://brainly.com/question/16410118

#SPJ4

When a substance is dissolved in water, forming a 0.50m solution and  8.0 liters of the solution contains 240 grams of the substance then the molecular mass of the substance is 60 g/mol.

Given,

m = 240 g

MM = 0.5 mol/L

V = 8 L

∴ M = m/(MM × V)

⇒ MM = m/(M × V)

Where,

m = mass

M = number of moles

V = volume in L

MM = molecular mass

Substituting the values we get,

Molecular mass = 240 g/(0.5 mol L⁻¹ × 8 L)

⇒Molecular mass = 240/4 g/mol = 60 g/mol

Hence, the molecular mass of the substance is 60 g/mol.

Learn more about molecular mass from the link given below.

https://brainly.com/question/15325777

#SPJ4

Pressure is a large and continuous force that is either exerted or given on or against an object or thing by something coming into contact with it.

Hope this helps! :)

Global winds would be affected if all areas of Earth received the same amount of solar radiation is the distribution of solar heating across the planet produce global wind pattern

The earth climate system depend entirely on the sun for its energy and solar radiation warm the atmosphere and fundamental to atmospheric composition and while the distribution of solar heating across the planet produces global wind pattern and contributes to the formation of clouds and storm and rainfall and scientist say that one percent decreases would lower earth means global temprature by more than degree kelvin and according to the model decrease in solar energy of loss than 10 percent could effectively freeze earth entire surfaces

Know more about Earth

https://brainly.com/question/14285428

#SPJ1

To make the silver shiny again, we can do silver tarnishes. The balanced tarnishing reaction is 2Ag(s) + H2S(g) --> Ag2S(s) + H2(g). Hence, the correct coefficients for the reaction above are: 2, 1, 1, 1.

A balanced reaction is when the coefficient of all atoms in the reactants (the left side) is the same as the products (the right side). Given this equation:

Ag(s) + H2S(g) --> Ag2S(s) + H2(g)

The balanced reaction is:

2Ag(s) + H2S(g) --> Ag2S(s) + H2(g)

Hence, the coefficients of the reaction above are: 2, 1, 1, and 1.

Learn more about balancing chemical equations here https://brainly.com/question/26227625

#SPJ4

The empirical formula of the compound is  [tex]CH_{2} O[/tex] while the molecular formula is [tex]C_{2}H_{4} O_{2}[/tex]

There are several formulas that a compound can have and these formulas that a compound can have include;

a) Molecular formula

b) Empirical formula

c) Structural formula

The empirical formula is the simplest formula that a compound can have. This formula shows the ratio of the toms that are found in the compound has we can see it. Let us now obtain the empirical formula.

Dividing each term by the relative atomic mass we have;

Percentage of oxygen = (100 - (6.67 + 40)) = 53.33%

C -  40/12    H - 6.67/1     O - 53.33/16

Dividing through by the lowest ratio;

C - 3.33/3.33     H - 6.67/3.33        O - 3.33/3.33

C - 1                   H - 2                       O - 1

The empirical formula is [tex]CH_{2} O[/tex]

The molecular formula is obtained from;

[12 + 2 + 16]n = 60

n =2

The molecular formula is;

[tex]C_{2}H_{4} O_{2}[/tex]

Learn more about empirical formula:https://brainly.com/question/14044066

#SPJ1

From the formula unit potassium carbonate, there are two potassium ions and one carbonate ion.

The term formula unit refers to the smallest unit of an ionic compound. Indicates the ratio of ions in a compound. For potassium carbonate, the unit of the formula is K₂CO₃.

In recent years, potassium carbonate (K₂CO₃.) has been extensively employed as a mild base catalyst in several chemical processes, including Knoevenagel and Nitroaldol Condensation O-alkylation the production of 2H-chromenes , and monomethylation reactions

there fore, From this formula unit we can see that there are two potassium ions and one carbonate ion.

learn more about Formula unit in details:

Brainly.com/question/19293051

#SPJ4

It float on water density= 2.27 g/ml.

What is density?

density is the mass of a material substance per unit volume. d = M/V, where d is density, M seems to be mass, and V is volume, is the formula for density. Grams per cubic centimetre are a common unit of measurement for density. For instance, while Earth has a density of 5.51 grammes per cubic centimetre, water has a density of 1 grammes per cubic centimetre. The unit of density is kilogrammes per cubic metre. For instance, air weighs 1.2 kilogrammes per cubic metre. In textbooks and manuals, the densities of typical solids, liquids, as well as gases are listed.

Density is considered an important factor in identifying a substance. Some examples of highly dense materials are iron and platinum.

As per the question

Density = mass /volume

The mass peice of sulphur= 227gm

Displaed in 50 ml of water .

Thus,

Density= 227 g/ (150-50) mL

= 2.27 g m/L

To learn more about density this click
https://brainly.com/question/26364788
#SPJ1

there is a complex formed between iodine and many organic compound when you place the developed tlc plate in an iodine chamber

A commonly used semi-destructive visualization method is to expose a developed TLC plate to iodine  (I2)  vapor. An "iodine chamber" can be created by adding a few iodine crystals to a TLC chamber, or by adding a few iodine crystals to a chamber containing a portion of powdered silica or alumina (Figure 2.33a). When a developed TLC plate is placed in the chamber and capped, the iodine sublimes and reacts with the compounds on the plate, forming yellow-brown spots (Figure 2.33d). The coloration occurs because iodine forms colored complexes with many organic compounds. This stain will work with approximately half the compounds you may encounter.

This method is considered "semi-destructive" because complexation is reversible, and the iodine will eventually evaporate from the TLC plate, leaving the original compound behind. When the coloration fades, it is theoretically possible to use another visualization technique on the TLC plate, although it's possible the compound may have also evaporated by that time.

learn more about TLC here https://brainly.com/question/13086570

#SPJ4