Consider the following statement. For all positive real numbers r and s, vr + Str + VS. Some of the sentences in the following scrambled list can be used in a proof by contradiction for the statement. But this is a contradiction because r and s are positive. Simplifying the equation gives 0 = 2V75 | But this is a contradiction because r and s are negative. Squaring both sides of the equation gives r + s = r + 2yrs + s. Squaring both sides of the equation gives r + s = r + 2rs + s. By the zero product property, at least one of vror vs equals 0, which implies r or s equals 0. Construct a proof by contradiction of the statement by using the appropriate sentences from the list and putting them in the correct order. 1. Suppose not. That is, suppose there exists positive real numbers r and s such that r + s = ✓r + VS. 2. But this is a contradiction because r and s are positive. 3. ---Select--- 4. ---Select--- 5. --Select--- 6. Thus we have reached a contradiction and have proved the statement.

The sum of the geometric series 4 + 3 + 9/4 + 27/16 +...  is 16.

To find the sum of the given geometric series, we need to determine the common ratio (r) and the first term (a).

We can see that each term of the series is obtained by multiplying the previous term by 3/4. Therefore, the common ratio is 3/4.

The first term (a) is 4.

Using the formula for the sum of a finite geometric series, we can find the sum of the first n terms of the series

Sn = a(1 - r^n) / (1 - r)

Substituting the values of a and r, we get

Sn = 4(1 - (3/4)^n) / (1 - 3/4)

Simplifying the expression

Sn = 16(1 - (3/4)^n)

Since this is an infinite geometric series (the ratio r is less than 1), the sum of the series can be found by taking the limit as n approaches infinity

S = [tex]\lim_{n \to \infty}[/tex] 16(1 - (3/4)^n)

S = 16(1 - 0) = 16

Learn more about geometric series here

brainly.com/question/30763189

#SPJ4

The given question is incomplete, the complete question is:

Find the sum of the geometric series  4 + 3 + 9/4 + 27/16 +...

1. The probability of getting one 1 is 0.5177

2. The probability of getting at least one snake-eyes in 24 throws is 0.4907.

To find the probability of getting at least one 1 when throwing 4 dice, we can first find the probability of not getting any 1s and then subtract that from 1.

There are 6 sides on a die, and 5 sides are not 1. The probability of not getting a 1 in a single die throw is 5/6. Since the dice are independent, the probability of not getting any 1s when throwing 4 dice is (5/6)^4.

Now, we can find the probability of getting at least one 1:

P(at least one 1) = 1 - P(no 1s) = 1 - (5/6)^4 = 0.5177

b) To find the probability of getting at least one snake-eyes (1,1) when throwing 2 dice 24 times, we can first find the probability of not getting any snake-eyes in 24 throws and then subtract that from 1.

The probability of not getting snake-eyes in a single throw of 2 dice is 1 - 1/36 = 35/36, since there are 36 possible outcomes and only 1 of them is snake-eyes.

Now, we can find the probability of not getting any snake-eyes in 24 throws of 2 dice:

P(no snake-eyes in 24 throws) = (35/36)^24 = 0.5093

Finally, we can find the probability of getting at least one snake-eyes in 24 throws:

P(at least one snake-eyes) = 1 - P(no snake-eyes in 24 throws) = 1 - 0.5093 = 0.4907

Find more useful exercises on probability;

https://brainly.com/question/14210034

#SPJ1

When x=-5, dy/dt = -700 and  When x=2, dy/dt = 0.

To find dy/dt when x=-5, we first need to differentiate y with respect to t using the chain rule:

dy/dt = (dy/dx) * (dx/dt)

Using the power rule and product rule for differentiation, we can find:

dy/dx = 6[tex]x^{2}[/tex] + 2x
dx/dt = -5 (since x is given as -5)

Substituting these values into the chain rule equation, we get:

dy/dt = (6(-5[tex])^{2}[/tex] + 2(-5)) * (-5) = -700

Therefore, when x=-5, dy/dt = -700.

To find dy/dt when x=2, we can use the same method:

dy/dx = 6[tex]x^{2}[/tex] + 2x
dx/dt = 0 (since x is constant)

Substituting these values into the chain rule equation, we get:

dy/dt = (6(2[tex])^{2}[/tex] + 2(2)) * 0 = 0

Therefore, when x=2, dy/dt = 0.

Know more about  power rule   here:

https://brainly.com/question/29288036

#SPJ11

The required answer is the inverse of J(X0) does not exist.

The Jacobian matrix represents the differential of f at every point where f is differentiable. In detail, if h is a displacement vector represented by a column matrix, the matrix product J(x) ⋅ h is another displacement vector, that is the best linear approximation of the change of f in a neighborhood of x, if f(x) is differentiable at x.

To find the Jacobian matrix J for this initial guess xo of (0,-1), we first need to find the partial derivatives of each equation with respect to x and y:

∂f1/∂x = 0     ∂f1/∂y = 0
∂f2/∂x = 0     ∂f2/∂y = 1

Therefore, the Jacobian matrix J is:

J = [∂f1/∂x ∂f1/∂y; ∂f2/∂x ∂f2/∂y] = [0 0; 0 1]

Next, to find J(20), we simply substitute x=20 and y=20 into the Jacobian matrix:

J(20) = [0 0; 0 1]

Finally, we can use Newton's method to find the next iteration X1:

X1 = X0 - J(X0)^(-1) * F(X0)

where X0 is the initial guess, J(X0) is the Jacobian matrix at X0, and F(X0) is the function evaluated at X0.

Plugging in the values we have:

X0 = (0,-1)
J(X0) = [0 0; 0 1]
F(X0) = [2 + 6; 5.23 + (-1) - 5] = [8; 0.23]

Now, we need to find the inverse of J(X0):

J(X0)^(-1) = [1/0 0; 0 1/1] = [undefined 0; 0 1]

Since the inverse of J(X0) does not exist, we cannot proceed with one iteration of Newton's method.
The given nonlinear system of equations is not written correctly. Please provide the correct system of equations, including the variables, so I can help you find the Jacobian matrix and apply Newton's method.

To know more about  Newton's method. Click on the link.

https://brainly.com/question/14865059

#SPJ11

The standard error of the mean, rounded to 2 decimal places, is 1.73.

Explanation:

Given that: Forty-five elements were randomly sampled from a population that has 1500 elements. The sample mean is 180 with a varience of 135.

The standard error of the mean (SEM) is a measure of how much the sample mean is likely to vary from the true population mean. It is calculated as the square root of the sample Variance divided by the square root of the sample size.

Thus,

To find the standard error of the mean, we will use the following formula:

Standard Error of the Mean (SEM) = sqrt(Sample Variance) / sqrt(Sample Size)

Given the information in your question, we have:
- Sample Variance = 135
- Sample Size = 45 because forty-five elements were randomly sampled from a population

Now, we'll calculate the standard error of the mean:

1. Calculate the square root of the sample variance: sqrt(135) ≈ 11.62

2. Calculate the square root of the sample size: sqrt(45) ≈ 6.71

3. Divide the results from steps 1 and 2: 11.62 / 6.71 ≈ 1.73

Therefore, the standard error of the mean, rounded to 2 decimal places, is 1.73.

Know more about standard error of the mean click here:

https://brainly.com/question/30765693

#SPJ11

The angles in the triangle are as follows:

m∠1 = 51 degrees

m∠2 = 33 degrees

m∠3 = 123 degrees

m∠4 = 24 degrees

The sum of angles in a triangle is 180 degrees. A right angle triangle is a triangle with one of its angles as 90 degrees.

Therefore, let's find the missing angle of the triangle.

Hence,

m∠1 = 180 - 72 - 57(sum of angles in a triangle)

m∠1 = 51 degrees

m∠2 = 90 - 72

m∠2 = 33 degrees

m∠3 = 180 - 57(sum of angles on a straight line)

m∠3 = 123 degrees

m∠4 = 180 - 123 - 33

m∠4 = 24 degrees

learn more on angles here:https://brainly.com/question/25950519

#SPJ1

Answer:

45

Step-by-step explanation:

The statement "if a function f is continuous & differentiable at a point c & f' (c) = 0, then c is a local minimum or a local maximum of f" is true.

A function f is continuous at a point c if the limit of the function as x approaches c exists and is equal to the function's value at c. Differentiability at c means the derivative f'(c) exists. If f'(c) = 0, it indicates a critical point.

To determine if it's a local minimum or maximum, we can apply the second derivative test. If f''(c) > 0, it's a local minimum, and if f''(c) < 0, it's a local maximum. If f''(c) = 0, the test is inconclusive, and we need to analyze the function further.

To know more about differentiable click on below link:

https://brainly.com/question/24898810#

#SPJ11

The statement "if a function f is continuous & differentiable at a point c & f' (c) = 0, then c is a local minimum or a local maximum of f" is true.

A function f is continuous at a point c if the limit of the function as x approaches c exists and is equal to the function's value at c. Differentiability at c means the derivative f'(c) exists. If f'(c) = 0, it indicates a critical point.

To determine if it's a local minimum or maximum, we can apply the second derivative test. If f''(c) > 0, it's a local minimum, and if f''(c) < 0, it's a local maximum. If f''(c) = 0, the test is inconclusive, and we need to analyze the function further.

To know more about differentiable click on below link:

https://brainly.com/question/24898810#

#SPJ11

Answer:

Part 1:  (2x + 15)° + (4x + 9)° = 90°

Part 2:  x = 11

Part 3:  First angle = 37°

Part 4:  Second angle = 53°

Step-by-step explanation:

Pt. 1:  When two angles are complementary, they form a right angle and their sum is 90°

Thus, the equation we can use to find x is (2x + 15)° + (4x + 9)° = 90°

Pt. 2:  Now we can simply solve for x:

[tex](2x+15)+(4x+9)=90\\2x+15+4x+9=90\\6x+24=90\\6x=66\\x=11[/tex]

Pts 3 & 4:  Now that we've solved for x, we can plug in 11 for x for both angles to find their measures.

First angle:  2(11) + 15 = 22 + 15 = 37°

Second angle:  4(11) + 9 = 44 + 9 = 53°

The derivative value of dy for the given values of x and dx. y = x 1 x − 1 , x = 2, dx = 0.05 is -0.05.

The given function is y = x/(x-1). We need to find dy when x = 2 and dx = 0.05.

First, we find the derivative of the function with respect to x using the quotient rule:

y' = [(x-1)(1) - x(1)] / (x-1)²

= -1 / (x-1)²

Next, we substitute x = 2 into the derivative expression to get the slope of the tangent line at x = 2:

y' = -1 / (2-1)² = -1

This means that for every 1 unit increase in x, y decreases by 1 unit. So when dx = 0.05, the change in y is:

dy = y' × dx = (-1) × 0.05 = -0.05

Therefore, when x = 2 and dx = 0.05, the value of dy is -0.05. The main mathematics topic used here is calculus, specifically the quotient rule and finding the derivative.

Learn more about the derivatives at

https://brainly.com/question/25324584

#SPJ4

The derivative value of dy for the given values of x and dx. y = x 1 x − 1 , x = 2, dx = 0.05 is -0.05.

The given function is y = x/(x-1). We need to find dy when x = 2 and dx = 0.05.

First, we find the derivative of the function with respect to x using the quotient rule:

y' = [(x-1)(1) - x(1)] / (x-1)²

= -1 / (x-1)²

Next, we substitute x = 2 into the derivative expression to get the slope of the tangent line at x = 2:

y' = -1 / (2-1)² = -1

This means that for every 1 unit increase in x, y decreases by 1 unit. So when dx = 0.05, the change in y is:

dy = y' × dx = (-1) × 0.05 = -0.05

Therefore, when x = 2 and dx = 0.05, the value of dy is -0.05. The main mathematics topic used here is calculus, specifically the quotient rule and finding the derivative.

Learn more about the derivatives at

https://brainly.com/question/25324584

#SPJ4

The mean and standard deviation of the sample proportion is 0.4 and 0.09798 respectively.

To find the mean and standard deviation of the sample proportion, we can use the following formulas:
mean of sample proportion = p = proportion in the population = 0.4

The standard deviation of sample proportion = σp = √(p(1-p)/n), where n is the sample size.
Plugging in the values given in the question, we get:
mean of sample proportion = p = 0.4

standard deviation of sample proportion = σp = √(0.4(1-0.4)/30) = 0.09798 (rounded to 5 decimal places)

Therefore, the mean of the sample proportion is 0.4 and the standard deviation of the sample proportion is 0.09798 (rounded to 5 decimal places).

Learn more about mean:

https://brainly.com/question/26941429

#SPJ11

The distance from each tower to the fire is given as follows:

Suppose we have a triangle in which:

The lengths and the sine of the angles are related as follows:

[tex]\frac{\sin{A}}{a} = \frac{\sin{B}}{b} = \frac{\sin{C}}{c}[/tex]

The sum of the measures of the internal angles of a triangle is of 180º, hence the missing angle is given as follows:

c + 42 + 64 = 180

c = 180 - (42 + 64)

c = 74º.

(opposite to 10 miles).

The measure of the angle opposite to Tower A is of 64º, hence the distance is given as follows:

sin(64º)/d = sin(74º)/10

d = 10 x sine of 64 degrees/sine of 74 degrees

d = 9.35 miles.

The measure of the angle opposite to Tower B is of 42º, hence the distance is given as follows:

sin(42º)/d = sin(74º)/10

d = 10 x sine of 42 degrees/sine of 74 degrees

d = 6.96 miles.

More can be learned about the law of sines at https://brainly.com/question/4372174

#SPJ1

If you're gonna write. just write the numbers and equations...

a. To find the probability that daily sales will fall between 2,500 and 3,000 gallons, we need to find the proportion of the total area under the probability distribution curve that lies between 2,500 and 3,000 gallons. Since the distribution is uniform, the probability density function is constant over the interval [2,000, 5,000] and equals 1/(5,000 - 2,000) = 1/3,000. Thus, the probability of selling between 2,500 and 3,000 gallons is:

P(2,500 ≤ X ≤ 3,000) = (3,000 - 2,500) / (5,000 - 2,000) = 0.1667

Therefore, the probability that daily sales will fall between 2,500 and 3,000 gallons is approximately 0.1667 or 16.67%.

b. To find the probability that the service station will sell at least 4,000 gallons, we need to find the proportion of the total area under the probability distribution curve that lies to the right of 4,000 gallons. This can be computed as:

P(X ≥ 4,000) = (5,000 - 4,000) / (5,000 - 2,000) = 0.3333

Therefore, the probability that the service station will sell at least 4,000 gallons is approximately 0.3333 or 33.33%.

c. Since the distribution is continuous, the probability of selling exactly 2,500 gallons is zero. This is because the probability of any single point in a continuous distribution is always zero, and the probability of selling exactly 2,500 gallons corresponds to a single point on the distribution curve.

*IG:whis.sama_ent*

The equation of the osculating circle to [tex]y = x^4 - 2x^2 at x = 1[/tex] is: [tex](x - 1/2)^2 + (y + 1)^2 = (1/8)^2[/tex]

The first step in finding the equation of the osculating circle to [tex]y = x^4 - 2x^2[/tex] at x = 1 is to find the values of the first and second derivatives of y with respect to x at x = 1.

[tex]y = x^4 - 2x^2[/tex]

[tex]y' = 4x^3 - 4x[/tex]

[tex]y'' = 12x^2 - 4[/tex]

Evaluate y', y'', and y at x = 1:

[tex]y(1) = 1^4 - 2(1)^2 = -1[/tex]

[tex]y'(1) = 4(1)^3 - 4(1) = 0[/tex]

[tex]y''(1) = 12(1)^2 - 4 = 8[/tex]

The equation of the osculating circle can be expressed as:

[tex](x - a)^2 + (y - b)^2 = r^2[/tex]

where (a, b) is the center of the circle and r is its radius. To find (a, b) and r, we use the following formulas:

[tex]a = x - [(y')^2 + 1]^(^3^/^2^)^/ ^|^y''^|[/tex]

[tex]b = y + y'[(y')^2 + 1]^(^1^/^2^) ^/ ^|^y^''|[/tex]

[tex]r = [(1 + (y')^2)^(^3^/^2^)^] ^/ ^|^y''^|[/tex]

Substituting the values of x, y, y', and y'' at x = 1, we get:

[tex]a = 1 - [0^2 + 1]^(^3^/^2^) ^/ ^|^8^| = 1 - 1/2 = 1/2[/tex]

[tex]b = -1 + 0[0^2 + 1]^(^1^/^2) ^/ ^|^8^| = -1[/tex]

[tex]r = [(1 + 0^2)^(^3^/^2^)^] ^/ ^|^8^| = 1/8[/tex]

Learn more about Osculating circle

brainly.com/question/31436014

#SPJ11

The answer to the question for the following equation lim n → [infinity] 1 8 n 5n = lim n → [infinity] eln(y) is that lim n → ∞ (1/(8n^5)) = 0

Given the problem, we need to find the limit as n approaches infinity for the equation: lim n → ∞ (1/(8n^5)).

We'll also need to express this limit in terms of e^(ln(y)).

Let's follow these steps:

1. Write down the given equation: lim n → ∞ (1/(8n^5))

2. Apply the properties of limits: lim n → ∞ (1/n^5) * (1/8)

3. Since 1/8 is a constant, we can rewrite it as lim n → ∞ (1/n^5) * (1/8)

4. Now, find the limit as n approaches infinity for 1/n^5: As n increases, the value of 1/n^5 approaches 0, so lim n → ∞ (1/n^5) = 0.

5. Multiply the limit by the constant: 0 * (1/8) = 0

6. Now, express this limit in terms of e^(ln(y)): Since 0 is our limit, we can write it as e^(ln(0)). However, the natural logarithm of 0 is undefined, so we cannot express the limit in this form.

So, the answer to the question is that lim n → ∞ (1/(8n^5)) = 0, but it cannot be expressed in terms of e^(ln(y)).

Learn more about lim n: https://brainly.com/question/23935467

#SPJ11

The distribution we would use to look up the p-value is option (c) t(15).

Since the population standard deviation is unknown and the sample size is less than 30, we should use a t-distribution to look up the p-value.

The test statistic can be calculated as

t = (sample mean - hypothesized population mean) / (sample standard deviation / √(sample size))

Substitute the values in the equation

t = (1988 - 2000) / (32 / √(16))

Do the arithmetic operation

t = -3

The degrees of freedom for the t-distribution would be (sample size - 1), which is 15 in this case.

Therefore, the correct option is (c) t(15).

Learn more about t-distribution here

brainly.com/question/13624214

#SPJ4

Answer:

To find the perimeter of a rectangle, we add the lengths of all four sides. In this case, the rectangle is 3/4 yard long and 3 yards wide, so we can find its perimeter as follows:

Perimeter = 2 × length + 2 × width

Perimeter = 2 × (3/4) yards + 2 × 3 yards

Perimeter = 1.5 yards + 6 yards

Perimeter = 7.5 yards

Therefore, the perimeter of the rectangle is 7.5 yards.

To find the area of a rectangle, we multiply the length by the width. In this case, we have:

Area = length × width

Area = (3/4) yards × 3 yards

Area = 2.25 square yards

Therefore, the area of the rectangle is 2.25 square yards.

[ give thanks and rate 5 stars~ if this helps u! welcome po! ]

That is not correct.

The order of multiplication matters in multiplication expressions.

The correct order should be:

6 x a x b = a x b x 6

c x a x b = a x b x c

So the original expressions you provided:

6 x c x a=a x b x c

a x b x c = c x a x b

Are not equivalent. The order of the factors matters in multiplication.

The prove that has the statements is given in the image attached.

The given table presents a step-by-step explanation of the proof that ΔPQR and ΔSTU are similar triangles. The proof uses the definition of similar polygons, the congruence and similarity postulates, and the properties of equality.

The first two statements state that ΔPQR and ΔSTU are given and that ∠P ≅ ∠S, ∠Q ≅ ∠T, ∠R ≅ ∠U, respectively. These are given as part of the problem.

The third statement asserts that ΔPQR is similar to ΔSTU. This follows from the fact that the corresponding angles of the two triangles are congruent, which is stated in the second statement. This is one of the criteria for the similarity of two triangles, known as the Angle-Angle (AA) Similarity Theorem.

Therefore, the fourth statement defines the concept of similar polygons, which are polygons that have the same shape but may differ in size.

Read more about SSS Similarity Theorem here:

https://brainly.com/question/4163594

#SPJ1

See text below

SSS Similarity Theorem

If the corresponding sides of two triangles are in proportion, then the two

triangles are similar.

PQ/ST ≅ QR/TU ≅ PR SU

Given:

Prove: Δ PQR ~ ΔSTU

STATEMENT

1

2.

3.

4.

5.

6.

7.

8.

6

9.

10.

11.

12.

13.

14.

REASON

1. By construction

2. Corresponding angles

are congruent

3. -------- Theorem Similarity

4. Definition of Similar Polygons

5. Given

6. By construction

7. Substitution

8. Transitive Property of Equality

9. Multiplication Property of Equality

10. SSS Triangle

Congruence Postulate

11. Definition of Congruent Triangles

12) Substitution

13. Definition of Similar Polygons

14. Transitivity

The signal has a fundamental period of 6 and contains exclusively odd harmonics (n = 1, 3, 5,...).

A periodic signal is one that repeats the same pattern or sequence of values over a set period of time, referred to as the period or duration of one cycle.

The given signal is:

f(t) = 3sin(t) + 2sin(3t)

To determine whether this signal is periodic or aperiodic, we need to check whether it repeats itself after a certain time interval.

For a signal to be periodic, there must be a value T such that:

f(t) = f(t+T)   for all t

Let's first consider the first term of the signal: 3sin(t). This term is a sinusoidal function with a period of 2π. That is, it repeats itself every 2π units of t.

Now let's consider the second term of the signal: 2sin(3t). This term is also a sinusoidal function, but with a period of 2π/3. That is, it repeats itself every 2π/3 units of t.

To check whether the sum of these two terms is periodic, we need to find the smallest value of T for which the two terms will repeat themselves simultaneously. This is known as the fundamental period.

The fundamental period of a sum of two sinusoidal functions with different periods is given by the least common multiple (LCM) of the individual periods.

In this case, the individual periods are 2π and 2π/3. The LCM of these periods is:

LCM(2π, 2π/3) = 6π

Therefore, the fundamental period of the signal is 6π.

Since the signal is periodic, we can write it as a Fourier series:

f(t) = a0/2 + ∑(n=1 to infinity) [an*cos(nωt) + bn*sin(nωt)]

where:

ω = 2π/T = π/3   (fundamental angular frequency)

an = (2/T) ∫(0 to T) f(t)*cos(nωt) dt

bn = (2/T) ∫(0 to T) f(t)*sin(nωt) dt

Using the formulae for an and bn, we can calculate the coefficients of the Fourier series:

a0 = (1/T) ∫(0 to T) f(t) dt = 0   (since f(t) is odd)

an = (2/T) ∫(0 to T) f(t)*cos(nωt) dt = 0

bn = (2/T) ∫(0 to T) f(t)*sin(nωt) dt =

    (2/6π) ∫(0 to 6π) [3sin(t) + 2sin(3t)]*sin(nωt) dt

Evaluating this integral, we get:

bn = [tex](2/π) [(-1)^{n-1} + (1/3)(-1)^{n-1}][/tex]

Therefore, the Fourier series of the signal is:

f(t) = ∑(n=1 to infinity) [(2/π) [(-1)^n-1 + (1/3)(-1)^n-1]]*sin(nπt/3)

So, the signal is periodic with a fundamental period of 6π, and it contains only odd harmonics (n = 1, 3, 5, ...).

Learn more about periodic signals on:

https://brainly.com/question/30426575

#SPJ11

Answer:

We can use the Pythagorean theorem to find the diagonal length of the screen:

(diagonal)^2 = (width)^2 + (height)^2

(diagonal)^2 = (1.2m)^2 + (0.7m)^2

(diagonal)^2 = 1.44m^2 + 0.49m^2

(diagonal)^2 = 1.93m^2

diagonal = √1.93m^2

diagonal ≈ 1.39m

To convert to centimeters and round to the nearest cm, we multiply by 100 and round the result:

diagonal ≈ 139 cm

Therefore, the size of the television screen is approximately 139 cm.

16) This is a two-sample t statistic.

17 )The conservative degrees of freedom for the given statistic is 11

18)the difference between the two groups is not statistically significant at the alpha = 0.05 level, and the reported conclusion is correct.

19) Answer: C. 0.15 < P < 0.20

20)Question is incomplete

A statistic is a numerical summary of a sample, which is a subset of a larger population. Statistics are used in a wide range of fields, including business, economics, social sciences, and more.

The t-statistic is a measure of the difference between a sample mean and a population mean, divided by the standard error of the sample mean. It is used in hypothesis testing to determine if the difference between the two means is significant.

According to the given information:

16) This is a two-sample t statistic.

17 )The conservative degrees of freedom for this statistic can be calculated using the formula: df = (n1 - 1) + (n2 - 1), where n1 and n2 are the sample sizes of the two groups. In this case, the sample sizes are 7 and 6, so the degrees of freedom are (7-1) + (6-1) = 11.

18) To show that this t leads to the quoted conclusion, we need to calculate the p-value for the test. Since the t statistic is negative, we will use a one-tailed test to calculate the p-value. Using a t-distribution table or software, we can find that the p-value for a one-tailed t-test with 11 degrees of freedom and a t-statistic of -1.05 is approximately 0.16. Therefore, we can conclude that the difference between the two groups is not statistically significant at the alpha = 0.05 level, and the reported conclusion is correct.

19) Answer: C. 0.15 < P < 0.20

Yes, this P-value leads to the quoted conclusion. The p-value is greater than 0.05, indicating that we fail to reject the null hypothesis of no difference between the two groups, which is consistent with the study report.

20)Question is incomplete

To know more about Statistic and t statistic visit :

https://brainly.com/question/15236063

#SPJ1

The volume of the solid region bounded on the top by the paraboloid z = 6 - x^2 - y^2 and bounded on the bottom by the cone z = sqrt(x^2 + y^2) is 9π cubic units.

In cylindrical coordinates, the paraboloid and the cone can be expressed as Paraboloid is z = 6 - r^2 and Cone is z = r.

To find the volume of the solid region bounded by these surfaces, we need to integrate over the appropriate limits. Since the cone lies below the paraboloid, we need to integrate from the bottom of the cone to the top of the paraboloid.

The limits of integration for r are 0 to 6^(1/2)cos(theta) since the cone intersects the paraboloid when z=r, giving r = 6^(1/2)sin(theta) and z = 6 - r^2.

The limits of integration for theta are 0 to 2pi since we need to cover the full circle.

The limits of integration for z are r to 6 - r^2.

Therefore, the volume of the solid is given by the triple integral

V = ∫∫∫ r dz dr dθ, where the limits of integration are:

0 ≤ r ≤ 6^(1/2)cos(theta)

0 ≤ θ ≤ 2π

r ≤ z ≤ 6 - r^2

Solving the triple integral,

V = ∫∫∫ r dz dr dθ

= ∫0^2π ∫0^6^(1/2)cos(theta) ∫r^(6-r^2) r dz dr dθ

= ∫0^2π ∫0^6^(1/2)cos(theta) (3r^2 - r^4) dr dθ

= ∫0^2π (9/2 - 2/5 cos^2(theta)) dθ

= 9π

Therefore, the volume of the solid region is 9π cubic units.

To know more about volume of the solid region:

https://brainly.com/question/17206344

#SPJ4

For considering a figure present in above figure, the area of shaded region of right angled triangle is equals to the 20 km². So, option(b) is right one.

The area of the shaded region is calculated by the difference between the area of the entire polygon and the area of the unshaded part inside the polygon.

We have a figure present in above figure. It consists two parts one is shaded and non-shaded. It looks like a right angled triangle with angle B is 90°. In case of right angled ∆ABC,

Length of base of triangle, BC = 10 km

Height of triangle, AB = 8 km

In case smaller right angled triangle,

∆ABD, Length of base, BD = 5 km

Length of prependicular, AB = 8 km

We have to determine the area of shaded part. Using above definition, area of shaded part of figure= area of larger right angled triangle - area of smaller right angled triangle

= area( ∆ABC) - area( ∆ABD)

[tex]= \frac{ 1}{2}AB×BC - \frac{ 1}{2}AB×BD \\ [/tex]

=> [tex] = \frac{ 1}{2}×10 ×8 - \frac{ 1}{2}×8× 5[/tex]

= 20.

Hence, required value is 20 square km.

For more information about area of right angled triangles, visit:

https://brainly.com/question/28470545

#SPJ4

Complete question:

The above figure complete the question.

What is the area of the shaded region?

a) 20 km²

b) 12 km²

The values of a and b given vectors are a = 4 and b = 8.

for a set of vectors to be orthogonal, the dot product of any two distinct vectors in the set should be zero.

Let's check if this condition is satisfied for the given vectors:

u_1 • u_2 = (2)(4) + (1)(-5) + (-1)(3) = 8 - 5 - 3 = 0

u_1 • u_3 = (2)(2) + (1)(a) + (-1)(b) = 4 + a - b

u_2 • u_3 = (4)(2) + (-5)(a) + (3)(b) = 8 - 5a + 3b

We need to find values of a and b such that u_1, u_2, and u_3 form an orthogonal set. So we need u_1 • u_3 = 0 and u_2 • u_3 = 0.

u_1 • u_3 = 4 + a - b = 0, so a - b = -4 ...(1)

u_2 • u_3 = 8 - 5a + 3b = 0, so 5a - 3b = 8 ...(2)

We now have two equations in two variables (a and b). Solving these equations simultaneously, we get:

a = 4, b = 8

Substituting these values back into the dot products, we can check that u_1, u_2, and u_3 form an orthogonal set:

u_1 • u_2 = 0

u_1 • u_3 = 4 + 4 - 8 = 0

u_2 • u_3 = 8 - 20 + 24 = 0

Therefore, the values of a and b that make u_1, u_2, and u_3 an orthogonal set are a = 4 and b = 8.

know more about vector space visit :

https://brainly.com/question/16205930

#SPJ1

TRAP is a trapezoid. as slope of TR = slope of AP.

We have,

T(-1,1), R(3,4), A (7,2), and P(-1,-4).

We know that the trapezium have two parallel side and the parallel lines have same slope.

So, the slope for line TR

m = (4 - 1) / (3-(-1))

m = 3 / 4

and, the slope of AP

m = (-4-2) / (-1 -7)

m = -6 / (-8)

m= 3/4

As, the slope of TR = slope of AP.

Thus, TRAP is a trapezoid.

Learn more about Slope here:

https://brainly.com/question/3605446

#SPJ1

When choosing values of x between each intercept and values of x on either side of the vertical asymptotes, it is

important to consider the behavior of the function in those regions.  Choosing values of x close to the intercepts can

give you an idea of the shape of the function in that region.

Choosing values of x close to the vertical asymptotes can help you determine the behavior of the function as x

approaches that value.

Choosing values of x between each intercept and values of x on either side of the vertical asymptotes.

To choose values of x between each intercept and values of x on either side of the vertical asymptotes,

1. Identify the intercepts: Find the points where the function intersects the x-axis and the y-axis. These are the points where the function's value is zero.

2. Identify the vertical asymptotes: Determine the values of x where the function is undefined or has a vertical asymptote.

3. Choose values of x between each intercept: Select a value between each pair of intercepts that you found in step 1. These values will help you understand the function's behavior between the intercepts.

4. Choose values of x on either side of the vertical asymptotes: Select a value slightly less than and slightly greater than each vertical asymptote you found in step 2. These values will help you understand the function's behavior around the vertical asymptotes.

By following these steps, you can analyze the function's behavior around its intercepts and vertical asymptotes.

learn more on choosing values: https://brainly.com/question/31489257

#SPJ11

The following can be answered by the concept of Differentiation.
1. The first antiderivative f'(x) = ∫(10x + sin x) dx = 5x² + (-cos x) + C  

   The second antiderivative f(x) = (5/3)x³ - sin x + Cx + D.

2. The first antiderivative f'(x) = ∫(9x + sin x) dx = (9/2)x² - cos x + C

    The second antiderivative f(x) = (3/2)x³ - sin x + Cx + D.

(1) Given f ''(x) = 10x + sin x, we first find the first antiderivative, f'(x):

f'(x) = ∫(10x + sin x) dx = 5x² + (-cos x) + C

Next, we find the second antiderivative, f(x):

f(x) = ∫(5x² - cos x + C) dx = (5/3)x³ - sin x + Cx + D

So for question (1), f(x) = (5/3)x³ - sin x + Cx + D.

(2) Given f ''(x) = 9x + sin x, we first find the first antiderivative, f'(x):

f'(x) = ∫(9x + sin x) dx = (9/2)x² - cos x + C

Next, we find the second antiderivative, f(x):

f(x) = ∫((9/2)x² - cos x + C) dx = (3/2)x³ - sin x + Cx + D

So for question (2), f(x) = (3/2)x³ - sin x + Cx + D.

To learn more about Differentiation here:

brainly.com/question/24898810#

#SPJ11

The critical points are x = π/4 and x = 3π/4, and the extreme values on the interval [0,2] are 1/2 and -1/2,

To find the critical points of f(x) = 2 sin(x) cos(x) on the interval [0, 2] and determine the extreme values, we will first take the derivative of the function and set it equal to zero to find the critical points.

f(x) = 2 sin(x) cos(x)

f'(x) = 2 cos(x) cos(x) - 2 sin(x) sin(x) (using the product rule)

[tex]f'(x) = 2(cos^2(x) - sin^2(x))[/tex]

f'(x) = 2(cos(2x))

Setting f'(x) equal to zero to find the critical points, we get:

2(cos(2x)) = 0

cos(2x) = 0

2x = π/2, 3π/2, 5π/2

x = π/4, 3π/4, 5π/4

Only the values x = π/4 and x = 3π/4 are in the interval [0,2], so these are the critical points.

Next, we need to determine the extreme values of f(x) at these critical points and the endpoints of the interval [0,2].

We can do this by evaluating the function at these points and comparing the values.

f(0) = 0

f(π/4) = 2(sin(π/4)cos(π/4)) = sin(π/2)/2 = 1/2

f(3π/4) = 2(sin(3π/4)cos(3π/4)) = -sin(π/2)/2 = -1/2

f(2) = 0

Therefore, the function has a maximum value of 1/2 at x = π/4 and a minimum value of -1/2 at x = 3π/4.

There are no extreme values at the endpoints of the interval [0,2].

Thus, the critical points are x = π/4 and x = 3π/4, and the extreme values on the interval [0,2] are 1/2 and -1/2, respectively.

The final answer is: π/4, 3π/4, 1/2, -1/2

Learn more about critical points and extreme values of function

brainly.com/question/31399903

#SPJ11