Complete the curved arTOw mechanism ot the tollowing double elimination reaction When 2,2-dichloro-3,3-dimethylbutane [ealcd with tWO equivalents of sodium amide and heated in mineral oil. Use three curved artows show the elimination of the first hydrogen chloride b) Use three curved arrows t0 show the elimination of the second hydrogen chloride:

elements heavier than iron are known to be formed is option e. Heavy elements are primarily formed in supernovae.

Elements heavier than iron are primarily formed in supernovae. During a supernova, a massive star undergoes a catastrophic explosion, which generates extremely high temperatures and pressures. These conditions are required for the fusion of lighter elements to form heavier ones, including elements like gold, silver, and uranium.

While black holes and Cepheid variable stars do play a role in the formation of heavy elements, they are not the primary sources. Black holes are not directly involved in the formation of heavy elements, although they may be associated with supernova explosions that produce them. Cepheid variable stars are a type of pulsating star that can help us to measure distances in the universe but they are not known to be a significant source of heavy elements.

All main sequence stars fuse hydrogen into helium in their cores, but they do not produce heavier elements in significant quantities. The helium flash process is a brief period of helium fusion that occurs in low-mass stars, but it does not produce elements heavier than helium.

learn more about supernovae here:

https://brainly.com/question/28348110

#SPJ11

Answer:

Explanation:

To solve this problem, we can use Boyle's Law, which states that the product of the pressure and volume of a gas is constant as long as the temperature and number of moles of the gas are held constant.

If we assume that the initial pressure is 800.0 mmHg and the initial volume is 380.0 mL, we can write:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume, and P2 and V2 are the new pressure and volume.

Since we want to find the new volume at standard pressure (which is 760.0 mmHg), we can set P2 = 760.0 mmHg and solve for V2:

P1V1 = P2V2

800.0 mmHg × 380.0 mL = 760.0 mmHg × V2

V2 = (800.0 mmHg × 380.0 mL) / 760.0 mmHg

V2 = 400.0 mL

Therefore, the gas will occupy a volume of 400.0 mL at standard pressure.

The heat used to heat the 21.97-gram sample of iron from 5.8 degrees Celsius to 100.00 degrees Celsius is 926.64 joules.

To calculate the heat (in joules) used to heat a 21.97-gram sample of iron from 5.8 degrees Celsius to 100.00 degrees Celsius with a specific heat of 0.450 J/g*C, you can use the following formula:

q = mcΔT

where q represents the heat, m is the mass of the sample, c is the specific heat, and ΔT is the change in temperature.

1. Identify the variables:
m = 21.97 g (mass of iron)
c = 0.450 J/g*C (specific heat of the iron)
ΔT = 100.00 - 5.8 = 94.2°C (change in temperature)

2. Plug the values into the formula:
q = (21.97 g) * (0.450 J/g*C) * (94.2°C)

3. Calculate the heat:
q = 926.641 J

4. Round the answer to 2 decimal spaces:
q ≈ 926.64 J

To know more about Heat:

https://brainly.com/question/31360204

#SPJ11

The hydroxide that precipitates first upon the addition of strong base is the one with the lower Ksp value.

In this case, the Ksp of Cu(OH)2 is lower than that of Co(OH)2. Therefore, Cu(OH)2 will precipitate first.

The pH at which the separation occurs depends on the Ksp values of the two hydroxides. The Ksp of Cu(OH)2 is 2.2 x 10^-20 and the Ksp of Co(OH)2 is 1.3 x 10^-15.

To calculate the pH at which the separation occurs, we need to use the following equation: Ksp = [Cu2+][OH-]^2. At the point of separation, [Cu2+] = [OH-] = x. Therefore, Ksp = x^3.

Solving for x gives us x = 1.36 x 10^-7 M. The pH at which this concentration of OH- is achieved is 6.87.

learn more about Ph here:brainly.com/question/15289741

#SPJ11

a)To increase the thickness of the SiO2 film by 0.5 μm through oxidation in H2O at 1200°C, we need to calculate the oxidation rate of silicon (Si) in SiO2.

The oxidation rate can be determined using the Deal-Grove model, which states that the oxidation rate is proportional to the difference between the concentration of oxygen at the SiO2/Si interface and the equilibrium concentration.

Assuming that the concentration of oxygen at the interface is zero and the equilibrium concentration is 2.6x10^20 atoms/cm^3, the oxidation rate of Si is 1.13x10^-8 μm/s. Therefore, the time required to increase the thickness of the SiO2 film by 0.5 μm is: t = Δh/r = 0.5 μm / 1.13x10^-8 μm/s = 44,248 seconds = 12.29 hours. So, it would take approximately 12.29 hours to increase the thickness of the SiO2 film by 0.5 μm through oxidation in H2O at 1200°C.

b. To repeat the calculation for oxidation in dry O2 at 1200°C, we need to determine the oxidation rate of Si in SiO2 under these conditions. The oxidation rate in dry O2 is typically higher than in H2O due to the higher concentration of oxygen. Assuming an equilibrium concentration of 5x10^20 atoms/cm^3, the oxidation rate of Si in dry O2 is 2.34x10^-8 μm/s.

Therefore, the time required to increase the thickness of the SiO2 film by 0.5 μm is: t = Δh/r = 0.5 μm / 2.34x10^-8 μm/s = 21,368 seconds = 5.93 hours. So, it would take approximately 5.93 hours to increase the thickness of the SiO2 film by 0.5 μm through oxidation in dry O2 at 1200°C.

To know more about atom click here

brainly.com/question/13973654

#SPJ11

H2 (H--H) has a lesser bond strength than F2 (F--F) .O2 (O=O) has a longer bond length than F2 (F-F) .I2 (I--I) has a lesser bond energy than F2 (F-F).

H2 (H--H) has a lesser bond strength than F2 (F--F) because the bond between two hydrogen atoms is weaker than the bond between two fluorine atoms.O2 (O=O) has a longer bond length than F2 (F-F) because the bond between two oxygen atoms is longer due to their larger atomic size compared to fluorine atoms.I2 (I--I) has a lesser bond energy than F2 (F-F) because the bond between two iodine atoms is weaker, and it requires less energy to break it compared to the bond between two fluorine atoms.

Bond strength is the strength with which a chemical bond holds two atoms together. Bond length is defined as the equilibrium distance between the nuclei of two bonded atoms in a molecule. Bond energy is the energy required to separate an isolated molecule into two fragments (atoms or radicals).

Learn more about bond length : https://brainly.com/question/3405662

#SPJ11

The concentration of sucrose at 39 minutes would be 0.2263 M

To answer your question, we need to use the rate constant that was found in part b.

Since the reaction is zero order in sucrose, the rate law would look like: rate = k [sucrose]^0 which simplifies to:

rate = k

We can use this rate law to calculate the concentration of sucrose at 39 minutes.

To do so, we first need to calculate the value of k.

From part b, we know that the rate constant is 0.0023 M/min.

Next, we can use the integrated rate law for zero-order reactions:

[sucrose] = [sucrose]0 - kt

where [sucrose]0 is the initial concentration of sucrose, k is the rate constant, and t is the time elapsed.

Plugging in the given values, we get:

[sucrose] = 0.316 M - (0.0023 M/min)(39 min)

[sucrose] = 0.316 M - 0.0897 M

[sucrose] = 0.2263 M

Learn more about sucrose at

https://brainly.com/question/28869238

#SPJ11

A pound of lithium and a pound of lead both weigh the same, but the density of these elements is different, meaning that they take up different amounts of space.

A pound of lithium (Li) and a pound of lead (Pb) would both weigh the same since they are both measured in pounds. However, the density of these elements is different, meaning that a pound of lithium would take up more space than a pound of lead.
Lithium is a lighter element than lead, with a density of 0.534 g/cm3 compared to lead's density of 11.3 g/cm3. This means that a pound of lithium would take up more space than a pound of lead, but they would still weigh the same.
It's important to note that the weight and density of these elements can have practical implications. For example, lead is often used in weights and bullets because of its high density and weight, whereas lithium is used in batteries because of its light weight and ability to store energy efficiently.

learn more about lithium Refer: https://brainly.com/question/14272356

#SPJ11

When the mixture of H₂O₂ and Fe(NO₃)₃ is bubbled, the reaction produces oxygen gas due to the oxidation of Fe(NO₃)₃.

Oxidation is a chemical reaction that involves the transfer of electrons from one molecule to another. It is essentially a reaction between an electron-donating molecule, known as the oxidant, and an electron-accepting molecule, known as the reductant. During an oxidation reaction, the oxidant gains electrons from the reductant, while the reductant loses electrons to the oxidant.

This can be seen by the bubbles rising from the tube. When the bubbling ceases, the reaction is complete and the Fe(NO₃)₃ has been completely oxidized. Adding an extra 3 mL of H₂O₂ to the test tube initiates the reaction again, showing that the Fe(NO₃)₃ is acting as a catalyst, speeding up the reaction but not being consumed in the process. This indicates that Fe(NO₃)₃ is playing the role of a catalyst in the reaction.

To learn more about oxidation

https://brainly.com/question/13182308

#SPJ1

The two main conditions corrected in the Van der Waals equation that are not included in the Ideal Gas Law are 1) the finite volume of gas molecules and 2) the intermolecular forces between gas molecules.

The results of the Van der Waals equation and the Ideal Gas Law are most similar under low pressure and high temperature conditions. Under high pressure and low temperature conditions, the results of these two equations differ significantly.

In the Ideal Gas Law (PV=nRT), gas molecules are assumed to have no volume and no intermolecular forces. However, real gases do have a finite volume and experience intermolecular forces.

The Van der Waals equation (P+a(n/V)^2)(V-nb)=nRT) corrects these assumptions by incorporating the parameters "a" and "b" to account for intermolecular forces and the finite volume of gas molecules, respectively.

At low pressure and high temperature, the effects of finite volume and intermolecular forces become less significant, making the Ideal Gas Law a more accurate approximation.

Conversely, at high pressure and low temperature, these effects become more prominent, leading to larger deviations between the Ideal Gas Law and the Van der Waals equation.

To know more about Van der Waals equation click on below link:

https://brainly.com/question/30841996#

#SPJ11

The pH of a 0.0025 M Ba(OH)2 solution is 11.70. The correct option is b.

The pH of a solution can be calculated using the equation pH = -log[H+], where [H+] represents the concentration of hydrogen ions in the solution. In this case, we need to find the pH of a 0.0025 M Ba(OH)2 solution.

Ba(OH)2 dissociates into Ba2+ and 2OH- ions in water. Therefore, the concentration of hydroxide ions can be calculated by multiplying the concentration of Ba(OH)2 by 2, which gives us 0.005 M.

Next, we can use the equation Kw = [H+][OH-] to calculate the concentration of hydrogen ions. At 25°C, the value of Kw is 1.0 x 10^-14. Substituting the values we have, we get:

1.0 x 10^-14 = [H+][0.005]
[H+] = 2.0 x 10^-12 M

Finally, we can calculate the pH using the pH equation:

pH = -log[H+]
pH = -log(2.0 x 10^-12)
pH = 11.70

Therefore, the pH of a 0.0025 M Ba(OH)2 solution is 11.70, which corresponds to answer option (b).

For more such questions on pH.

https://brainly.com/question/15679811#

#SPJ11

The total pressure of the gas mixture which were transferred to a tank of 6.25 L at 51 °C is 1291.7 KPa.

Thus, For N₂: Volume (V) = 15.1 L. Temperature (T) = 25 °C = 25 + 273 = 298 K. Pressure (P) = 125 KPa. Gas constant (R) = 8.314 L.KPa/Kmol

PV = nRT= 125 × 15.1 = n × 8.314 × 298

1887.5 = n × 2477.572

n = 1887.5 / 2477.572

n = 0.762 mole

For O₂:

Volume (V) = 44.3 L. Temperature (T) = 25 °C = 25 + 273 = 298 K Pressure (P) = 125 KPa.Gas constant (R) = 8.314 L.KPa/Kmol Number of mole (n) =? PV = nRT

125 × 44.3 = n × 8.314 × 298

5537.5 = n × 2477.572. Divide both side by 2477.572

n = 5537.5 / 2477.572

n = 2.235 moles

Next, we shall determine the total mole of the mixture.

Mole of N₂ = 0.762 mole Mole of O₂ = 2.235 moles. Total mole = 0.762 + 2.235. Total mole = 2.997 moles. Volume (V) = 6.25 L. Temperature (T) = 51 °C = 51 + 273 = 324 K Gas constant (R) = 8.314 L.KPa/Kmol. Total of mole (n) = 2.997 moles

Thus, the total pressure of the gas mixture at 51 °C is 1291.7 KPa

Learn more about Pressure, refer to the link:

https://brainly.com/question/12971272

#SPJ1

The correct answer is (C) 2178 years, long it will take a 4.50-kBq sample of material to reach an activity level of 0.140 kBq with a half-life of 435 years

we can use the decay formula:
Final activity = Initial activity * (\frac{1}{2})^{(\frac{time elapsed }{ half-life})}

0.140 kBq = 4.50 kBq * (\frac{1}{2})^(\frac{time elapsed }{ 435 years})
To find the time , follow these steps:
1. Divide both sides by 4.50 kBq:
(0.140 kBq) / (4.50 kBq) = (1/2)^(time elapsed / 435 years)
2. Simplify the equation:
0.03111 = (\frac{1}{2})^{\frac{time elapsed }{ 435 years}}
3. Take the logarithm base 2 of both sides:
log2(0.03111) = log2((1/2)^(time elapsed / 435 years))
4. Use the logarithm property logb(a^x) = x * logb(a):
log2(0.03111) = (time elapsed / 435 years) * log2(1/2)
5. Simplify the equation and isolate the time elapsed:
time elapsed = 435 years * log2(0.03111) / log2(1/2)
6. Calculate the time elapsed:
time elapsed ≈ 2178 years

learn more about time   refer: https://brainly.com/question/28751492

#SPJ11

The most stable form of the major product of an ester upon exposure to excess NaOCH2CH3 in CH3CH2OH, followed by aqueous acidic workup, will depend on the specific ester and the conditions used.

To draw the most stable form of the major product of the given ester upon exposure to excess NaOCH2CH3 in CH3CH2OH, followed by aqueous acidic workup, we first need to identify the ester.

When an ester is treated with excess NaOCH2CH3 in CH3CH2OH, the ester undergoes a base-catalyzed reaction known as transesterification. The alkoxide ion (OCH2CH3-) generated by the reaction acts as a nucleophile and attacks the carbonyl carbon of the ester, resulting in the formation of a tetrahedral intermediate. The tetrahedral intermediate then collapses, resulting in the formation of a new ester and an alcohol. This process can be repeated multiple times, resulting in the formation of a mixture of esters and alcohols.

To determine the most stable form of the major product, we need to consider the stability of the different products formed. Generally, the most stable product is the one with the most substituted alkene. This is because more substituted alkenes are more stable than less substituted alkenes due to hyperconjugation and steric hindrance effects. Additionally, the product with the largest alkyl group attached to the carbonyl carbon is generally more stable than the product with smaller alkyl groups due to steric hindrance.

After transesterification, the mixture of esters and alcohols is treated with aqueous acidic workup. This converts the alkoxide ion back into the alcohol, protonates the carbonyl oxygen of the ester, and hydrolyzes any remaining esters into carboxylic acids. The resulting mixture of carboxylic acids, alcohols, and esters can be separated by distillation or chromatography.

In summary, Factors that can influence the stability of the product include the degree of substitution of the alkene, the size of the alkyl groups attached to the carbonyl carbon, and the strength of the acid used for the aqueous acidic workup.

For more such questions on Stable form.

https://brainly.com/question/28162575#

#SPJ11

The pH of the aqueous solution is 1, and the pOH is 13.

pH is defined as the negative logarithm of the concentration of H+ ions: pH = -log[H+] while pOH is defined as the negative logarithm of the concentration of OH- ions: pOH = -log[OH-]

Step 1: Determine the total concentration of H+ ions.
Both HCl and HBr are strong acids, meaning they completely dissociate in water, releasing H+ ions.
Total [H+] = [H+] from HCl + [H+] from HBr = 0.040 M + 0.060 M = 0.100 M

Step 2: Calculate the pH of the solution.
pH = -log10([H+])
pH = -log10(0.100)
pH = 1

Step 3: Calculate the pOH of the solution.
At 25°C, the relationship between pH and pOH is: pH + pOH = 14
pOH = 14 - pH
pOH = 14 - 1
pOH = 13

To know more about pH:

https://brainly.com/question/14058693

#SPJ11

SnI2(aq) --> Sn(s) + 2e-

I2(g) + 2e- --> 2I-(aq)

The given redox reaction is:

SnI2(aq) → Sn(s) + I2(g).

The oxidation half-reaction is the process in which SnI2 loses electrons and forms Sn(s). The electrons are written on the product side to balance the charge. Thus, the half-reaction for the oxidation half is:

SnI2(aq) → Sn(s) + 2e-.

The reduction half-reaction is the process in which I2 gains electrons and forms I-.

The electrons are written on the reactant side to balance the charge. Hence, the half-reaction for the reduction half is:

I2(g) + 2e- → 2I-(aq).

When these two half-reactions are combined, they yield the overall redox reaction:

SnI2(aq) → Sn(s) + I2(g).

Know more about Oxidation here:

https://brainly.com/question/13182308

#SPJ11

The equilibrium molar concentration of Cu²⁺(aq) is 7.59×10−4 M M. The assumption was made that the concentration of Cu²⁺(aq) is negligible compared to that of NH₃.

The simplifying assumption we make here is that the concentration of Cu²⁺(aq) coming from the Cu(NO₃)₂⋅6H₂O is negligible compared to that coming from the reaction with aqueous ammonia.

The balanced equation for the reaction of Cu²⁺ with aqueous ammonia is:

Cu²⁺(aq) + 4 NH₃(aq) ⇌ Cu(NH₃)₄²⁺(aq)

The overall formation constant, β4, is given by:

β4 = [Cu(NH₃)₄²⁺(aq)] / ([Cu²⁺(aq)] [NH₃(aq)]⁴)

At equilibrium, the concentrations of Cu(NH₃)₄²⁺(aq), Cu²⁺(aq), and NH₃(aq) are denoted by x, y, and z, respectively. Since one mole of Cu(NO₃)₂⋅6H₂O produces one mole of Cu²⁺(aq), the initial concentration of Cu2+(aq) is:

y0 = n / V = (12.5 g / 249.7 g/mol) / 0.500 L = 0.100 M

The equilibrium concentrations are related to the equilibrium constant by the mass balance equations:

x + y = y0

4x + z = 1.00 M

Substituting x = y0 - y into the second equation and solving for z gives:

z = 1.00 M - 4x = 1.00 M - 4(y0 - y) = 1.00 M - 4(0.100 M - y)

z = 1.00 M - 0.400 M + 4y = 0.600 M + 4y

Substituting the equilibrium concentrations into the expression for β4 gives:

2.1×10−13 = x / (y0 - y) z⁴

Simplifying and substituting in the expressions for x and z:

2.1×10−13 = (y0 - 2y) / (y0 - y) (0.600 M + 4y)⁴

Expanding the denominator and rearranging:

2.1×10−13 (y0 - y) = (y0 - 2y) (0.600 M + 4y)⁴

2.1×10−13 y0 - 2.1×10−13 y = (y0 - 2y) (0.600 M + 4y)⁴

Dividing by y0 - 2y and simplifying:

2.1×10−13 y0 / (y0 - 2y) - 2.1×10−13 = (0.600 M + 4y)⁴

At equilibrium, y is much smaller than y0, so we can neglect the term -2.1×10−13 and simplify further:

2.1×10−13 y0 / y0 = (0.600 M)⁴

Solving for y:

y = (2.1×10−13)^(1/4) (0.600 M) = 7.59×10−4 M

Therefore, the equilibrium molar concentration of Cu²⁺(aq) is approximately 7.59×10−4 M.

To know more about the equilibrium molar concentration refer here :

https://brainly.com/question/17137354#

#SPJ11

The volume of 15.0 M NH₃ that would be needed to make 0.630 moles of NH₃ is 42.0 mL or 0.042 L.

To solve this problem, we can use the equation:

moles = volume x concentration

We are given the number of moles we need (0.630) and the concentration of ammonia (15.0 M). Rearranging the equation to solve for volume, we get:

volume = moles / concentration

Plugging in the values we have, we get:

volume = 0.630 moles / 15.0 M

Simplifying this expression, we get:

volume = 0.042 L or 42.0 mL

Therefore, we would need a volume of 42.0 mL of 15.0 M NH3 to make 0.630 moles of NH₃.

Learn more about concentration here:https://brainly.com/question/26255204

#SPJ11

In the major product of the bromination reaction with two flanking cyclopropyl groups, the cyclopropyl groups will be in the trans configuration.

Bromination is a reaction that involves the addition of a bromine atom to a compound. In this case, the compound has two cyclopropyl groups, and the reaction will favor the formation of a trans product due to the lower steric hindrance compared to the cis configuration.

To know more about trans configuration, visit:

https://brainly.com/question/14678883

#SPJ11

The structure of the compound 2-bromopropane is shown in the image attached here.

We know that the chemical structure can be seen as a representation of the molecule or the compound that is under study and a way that can help us to identify the compound.

The structure of chemical compounds refers to the arrangement of atoms in a molecule or ion. Chemical compounds are made up of two or more different elements that are chemically bonded together.

Thus the correct structure is shown in the image attached.

Learn more about chemical structure:https://brainly.com/question/12166462

#SPJ1

Arranging the groups of atoms in order of increasing first ionization energy.
a) Be, Rb, Na
First ionization energy increases across a period and decreases down a group. Thus, the order is Rb < Na < Be.

b) Se, Se, Te
Since Se is repeated, we only need to compare Se and Te. Ionization energy decreases down a group, so the order is Te < Se.

c) Br, Ni, K
Ionization energy increases across a period and decreases down a group. Therefore, the order is K < Ni < Br.

d) Ne, Sr, Se
Ionization energy increases across a period and decreases down a group. So, the order is Sr < Se < Ne.

To know more about Ionization energy:

https://brainly.com/question/28385102

#SPJ11

The structure of the final product of the Stork reaction between cyclohexanone and propenal is a 1,5-dicarbonyl compound with a dimethylamine substituent on one of the carbonyl groups.

The Stork reaction involves the formation of an enamine intermediate between cyclohexanone and dimethylamine, followed by a Michael addition of the enamine to propenal. The resulting Michael adduct is a 1,5-dicarbonyl compound with an amine substituent.

The final product after hydrolysis of the enamine and elimination of dimethylamine is a 1,5-dicarbonyl compound with a dimethylamine substituent on one of the carbonyl groups. The amine group is not shown in the drawn structure of the final product, as per the instruction.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

The dissociation of acetic acid is more ordered because it involves the transfer of a proton from the acid to water molecules.

This process is characterized by the formation of hydronium ions and acetate ions.

The dissociation of acetic acid is a reversible process that follows a specific chemical equilibrium.

In addition, the dissociation of acetic acid is also influenced by the pH of the solution and the concentration of the acid.

Overall, the dissociation of acetic acid is a complex process that involves multiple steps and is influenced by various factors.

To know more about acetic acid, refer here:

https://brainly.com/question/12924347#

#SPJ11

a. rubbery material.

Atactic polystyrene when quenched from 120°C to room temperature it becomes rubbery material.

Atactic polystyrene has a glass transition temperature (Tg) of -100°C. When it is quenched (cooled very quickly) from 120°C to room temperature, it becomes a rubbery material. This is because the rapid cooling prevents the polymer chains from arranging themselves in an orderly manner, leading to an amorphous structure.

If atactic polystyrene were to crystallize, it would become a glassy material. Crystallization involves the formation of a highly ordered and structured arrangement of polymer chains, resulting in a more rigid and glassy state.

However, atactic polystyrene is generally an amorphous polymer and does not crystallize easily due to its irregular molecular structure.

In summary, when atactic polystyrene is quenched from 120°C to room temperature, it forms a rubbery material.

Learn more about polystyrene here: https://brainly.com/question/29855572

#SPJ11

a. rubbery material.

Atactic polystyrene when quenched from 120°C to room temperature it becomes rubbery material.

Atactic polystyrene has a glass transition temperature (Tg) of -100°C. When it is quenched (cooled very quickly) from 120°C to room temperature, it becomes a rubbery material. This is because the rapid cooling prevents the polymer chains from arranging themselves in an orderly manner, leading to an amorphous structure.

If atactic polystyrene were to crystallize, it would become a glassy material. Crystallization involves the formation of a highly ordered and structured arrangement of polymer chains, resulting in a more rigid and glassy state.

However, atactic polystyrene is generally an amorphous polymer and does not crystallize easily due to its irregular molecular structure.

In summary, when atactic polystyrene is quenched from 120°C to room temperature, it forms a rubbery material.

Learn more about polystyrene here: https://brainly.com/question/29855572

#SPJ11

At 298 K, ethene gas has a standard enthalpy of formation of -780.1 kJ/mol.

As a result of subtracting the total of the standard enthalpies of formation of the reactants from the sum of the standard enthalpies of formation of the products, the standard enthalpy change of formation is determined.

The balanced equation for ethene gas combustion is:

ethene(g) + 3 Oxygen(g) → 2 Carbon dioxide(g) + 2 Water(l) ΔH° = -1411.1 kJ/mol

In terms of the enthalpies at which the products and reactants form, the enthalpy change of this reaction can also be stated as follows:

ΔH° = ΣΔHf°(products) - ΣΔHf°(reactants)

where Hf° is the compound's typical formation enthalpy.

To find the undetermined enthalpy of ethene gas production, we can rearrange this equation as follows:

ΔHf°(ethene(g)) = ΣΔHf°(products) - ΣΔHf°(reactants)

ΔHf°(ethene(g)) = [2ΔHf°(Carbon dioxide(g)) + 2ΔHf°(Water(l))] - [ΔHf°(ethene(g)) + 3ΔHf°(Oxygen(g))]

Using the provided data and substituting the known enthalpy values:

ΔHf°(ethene(g)) = [2(-393.5 kJ/mol) + 2(-285.8 kJ/mol)] - [ΔHf°(ethene(g)) + 3(0 kJ/mol)]

Simplifying the expression:

ΔHf°(ethene(g)) = -1560.2 kJ/mol + ΔHf°(ethene(g))

ΔHf°(ethene(g)) + ΔHf°(ethene(g)) = -1560.2 kJ/mol

2ΔHf°(ethene(g)) = -1560.2 kJ/mol

ΔHf°(ethene(g)) = -780.1 kJ/mol

To know more about enthalpy visit:-

https://brainly.com/question/13996238

#SPJ1

We need 108.64 grams of water to react with solid magnesium and form 6.0310 mol of hydrogen gas.

The balanced chemical equation for the reaction is:

Mg(s) + 2H2O(l) → Mg(OH)2(aq) + H2(g)

From the equation, we can see that 1 mole of Mg reacts with 2 moles of H2O to form 1 mole of H2. Therefore, to form 6.0310 mol of H2, we need to react 3.0155 mol of Mg with water.

The molar mass of Mg is 24.31 g/mol. Therefore, the mass of Mg required would be:

3.0155 mol Mg × 24.31 g/mol Mg = 73.31 g Mg

To react with this amount of Mg, we need twice the amount of water, or 6.0310 mol H2O.

The molar mass of H2O is 18.015 g/mol. Therefore, the mass of H2O required would be:

6.0310 mol H2O × 18.015 g/mol H2O = 108.64 g H2O

Therefore, we need 108.64 grams of water to react with solid magnesium and form 6.0310 mol of hydrogen gas.

To know more about solid magnesium refer here:

brainly.com/question/15197592

#SPJ11

The number of milliliters of a 6.00 m NaOH solution are needed to provide 0.370 mol of NaOH is approximately 61.7 mL.

To find the number of milliliters needed of a 6.00 M NaOH solution to provide 0.370 mol of NaOH, you can use the formula:

M = mol / L

Where M is the molarity of the solution (6.00 M), mol is the number of moles of solute (0.370 mol), and L is the volume of the solution in liters.

Rearrange the formula to solve for L:

L = mol / M

L = 0.370 mol / 6.00 M

L ≈ 0.0617 L

Now, convert L to mL:

1 L = 1000 mL

0.0617 L × 1000 mL/L ≈ 61.7 mL

So, approximately 61.7 mL of the 6.00 M NaOH solution are needed to provide 0.370 mol of NaOH.

Learn more about molarity here: https://brainly.com/question/30404105

#SPJ11

The alkalinity of the solution is 124.5 mg/L as CaCO3.

The alkalinity of a solution with a pH of 10.33 containing 50 mg/L of bicarbonate (HCO3-) and 50 mg/L of carbonate (CO3²-) can be calculated as follows:

1. Convert bicarbonate and carbonate concentrations to milliequivalents (meq/L) using their respective molecular weights (1 meq of HCO3- = 61 mg, 1 meq of CO3²- = 30 mg):
  - Bicarbonate: 50 mg/L ÷ 61 mg/meq = 0.82 meq/L
  - Carbonate: 50 mg/L ÷ 30 mg/meq = 1.67 meq/L

2. Add the milliequivalents together:
  - Total Alkalinity (meq/L) = 0.82 meq/L + 1.67 meq/L = 2.49 meq/L

3. Convert total alkalinity from meq/L to mg/L as CaCO3 by multiplying by the equivalent weight of CaCO3 (50 mg/meq):
  - Total Alkalinity (mg/L as CaCO3) = 2.49 meq/L × 50 mg/meq = 124.5 mg/L

Thus, the alkalinity of the solution is 124.5 mg/L as CaCO3.

Know more about alkalinity here:

https://brainly.com/question/11584594

#SPJ11

Pyridine is an aromatic compound. It has a planar structure with a six-membered ring consisting of five carbon atoms and one nitrogen atom.

The nitrogen atom has a lone pair of electrons, which participates in the delocalized π electron system, making it an aromatic compound.

Pyridine is a basic heterocyclic organic compound with the chemical formula C5H5N. It is a six-membered aromatic ring with five carbon atoms and one nitrogen atom.

Pyridine is a colorless liquid that has a strong, unpleasant odor. It is soluble in water and many organic solvents. Pyridine is used in a variety of applications, including as a solvent, as a precursor to agrochemicals and pharmaceuticals, and as a reagent in chemical synthesis. It is also an important building block in the synthesis of various chemicals and drugs, such as nicotinamide, which is a form of vitamin B3.

Visit here to learn more about Pyridine brainly.com/question/16241363

#SPJ11

In a lab experiment, when a certain volume of a solution is calculated, the lab procedures instruct you to divide the total volume into four equal aliquots and add them to the solution one by one.

The pH of the solution after each addition depends on the buffer capacity of the system, which is determined by the pKa of the weak acid and the concentration of its conjugate base. If an acid is added, the pH of the solution will decrease, while adding a base will increase the pH.

To calculate the new pH after each addition, the Henderson-Hasselbalch equation can be used with the updated concentrations of the weak acid and its conjugate base. The initial pH of the solution is also known and can be used as a starting point for the calculations.

Learn more about initial pH

https://brainly.com/question/30318997

#SPJ4

Complete Question:

In a lab experiment, you have calculated a certain volume of a solution. The lab procedures instruct you to take this volume and add it in four equal aliquots (i.e., divide the total volume by 4 to get the volume added per each addition). Given that the initial pH of the solution is known, what will the pH be after each addition?