To complete and balance the following redox reactions in acidic and basic solutions, here are the balanced equations with proper phases for each species involved:
Redox reaction in acidic solution:
[tex]TeO_{2}(aq) + N_{2}O(g) = Te(s) + NO(g)[/tex]
Redox reaction in basic solution:
[tex]Cr2O_{72-}(aq) + Hg(0) = Hg_{2+} (aq) + Cr_{3+} (aq)[/tex]
Redox reaction in basic solution:
[tex]ReO_{4_}(aq) + Pb_{2+} (aq) = Re(s) + PbO_{2} (s)[/tex]
Redox reactions, also known as oxidation-reduction reactions, involve the transfer of electrons between chemical species. In a redox reaction, one species undergoes oxidation, which involves the loss of electrons, while another species undergoes reduction, which involves the gain of electrons.
The species that undergoes oxidation is called the reducing agent or reductant because it donates electrons, while the species that undergoes reduction is called the oxidizing agent or oxidant because it accepts electrons. Redox reactions involve a simultaneous occurrence of both oxidation and reduction.
For more details regarding redox reactions, visit:
https://brainly.com/question/28300253
#SPJ12
1.802 grams of khp is dissolved in 20.0 ml of distilled water
Answer:
0.441 M KHP
Explanation:
KHP has a molar mass of 204.22 g/mol. It is Not actually KHP, it has its own longer formula C8H5KO4, Potassium hydrogen phthalate.
To find the molarity we will simply do moles/L
moles = 1.802 g x (1 mol KHP / 204.22 g) = 0.008824 mol KHP
The volume needs to be in L so divide by 1000, 20.0/10000 = 0.0200 L
Molarity = moles / L = 0.008824 moles / 0.0200 L = 0.441 M = [KHP]
Below you will find a-model of an atom. Which of the answer choices is true aboutg this model?
Since atoms are extremely small, scientists use models to help them and others visualize the atom.
Electron
Proton
Neutron
A.
one another.
A limitation of this model is that you can't see where protons, neutrons and electrons are in relation to
B.
A benefit of this model is that it shows exactly how an atom looks in the size and shape.
C.
A limitation of this model is that it is much bigger than an actual atom.
D.
A benefot of this model is that it moves just like a real atom would.
The correct answer is A. "A limitation of this model is that you can't see where protons, neutrons, and electrons are in relation to one another."
What is the limitation of the model?This is because the given model does not show the arrangement or location of protons, neutrons, and electrons within the atom, as atoms are much smaller than what can be depicted in a model.
The model only provides a general representation of an atom's structure but does not accurately show the relative positions or movements of the particles within the atom.
Option B is incorrect because the model does not show the actual size and shape of an atom. Option C is incorrect because the given model is not necessarily bigger than an actual atom, as atoms are much smaller than what can be depicted in a model. Option D is incorrect because the given model does not show the movement of particles within the atom as real atoms would.
Learn more about atomic model here: https://brainly.com/question/25534456
#SPJ1
there are 8 isomeric alcohols with the formula C5H12O. draw the structure of this isomer: 3-methyl-2-butanol.
The formula C5H12O indicates that there are 5 carbon atoms, 12 hydrogen atoms, and 1 oxygen atom in the molecule.
To draw the structure of 3-methyl-2-butanol, we need to know that the name tells us there is a methyl (CH3) group on the third carbon atom, and that the molecule is a type of alcohol (ending in -ol) with a total of four carbon atoms in a chain, with a hydroxyl (-OH) group attached to the second carbon atom.
To draw the structure, we start by drawing a chain of four carbon atoms, with the second carbon atom having the -OH group attached to it. Then we add a methyl group (CH3) to the third carbon atom. Finally, we add enough hydrogen atoms to satisfy the valences of each atom, keeping in mind that each carbon atom needs four bonds and each hydrogen atom needs one bond. The resulting structure looks like this:
CH3
|
H--C--OH
|
H--C--H
|
H--C--H
|
H
This is the structure for 3-methyl-2-butanol, which is one of the eight isomeric alcohols with the formula C5H12O.
Visit here to learn more about isomeric alcohols : https://brainly.com/question/14718203
#SPJ11
The bond angle in BF−2
ion is closest to:
a) 90°
b) 100°
c) 120°
d) 180°
e) 135°
The bond angle in the BF₂⁻ ion can be determined by examining the molecule's shape and its bonding structure.
The BF₂⁻ ion has a central boron atom (B) with two fluorine atoms (F) bonded to it. The boron atom has three valence electrons, and it forms two covalent bonds with the fluorine atoms. The molecule also has an extra electron due to its negative charge, which is placed as a lone pair on the boron atom.
Considering the arrangement of the electron domains around the boron atom, we have three electron domains: two bonding domains formed by the B-F bonds and one nonbonding domain formed by the lone pair of electrons. This arrangement corresponds to a trigonal planar electron domain geometry. However, the molecular geometry will be bent due to the presence of the lone pair.
In a bent molecular geometry with a trigonal planar electron domain geometry, the bond angle is typically around 120°. However, since lone pairs repel bonding pairs more than bonding pairs repel each other, the bond angle in BF₂⁻ will be slightly less than 120°.
Thus, the bond angle in the BF₂⁻ ion is closest to: b) 100°
To know more about ion
brainly.com/question/14982375
#SPJ11
calculate the change in enthalpy associated with the combustion of 14.6 g of isooctane.
The change in enthalpy associated with the combustion of 14.6 g of isooctane is -672.7 kJ.
The first step in calculating the change in enthalpy associated with the combustion of isooctane is to write out the balanced chemical equation for the reaction:
C8H18 + 25/2 O2 -> 8 CO2 + 9 H2O
Next, we need to look up the standard enthalpy of formation (ΔHf°) values for each of the reactants and products in the equation. These values represent the change in enthalpy that occurs when one mole of the substance is formed from its constituent elements, under standard conditions (25°C and 1 atm pressure). Here are the relevant values:
ΔHf° (kJ/mol):
C8H18 = -258.8
O2 = 0
CO2 = -393.5
H2O = -285.8
Using these values, we can calculate the change in enthalpy (ΔH) for the combustion of 1 mole of isooctane:
ΔH = (8 x ΔHf°(CO2) + 9 x ΔHf°(H2O)) - (ΔHf°(C8H18) + 25/2 x ΔHf°(O2))
ΔH = (8 x -393.5 kJ/mol + 9 x -285.8 kJ/mol) - (-258.8 kJ/mol + 25/2 x 0 kJ/mol)
ΔH = -5515.7 kJ/mol + 258.8 kJ/mol
ΔH = -5256.9 kJ/mol
So, the change in enthalpy for the combustion of 1 mole of isooctane is -5256.9 kJ/mol. To find the change in enthalpy for the combustion of 14.6 g of isooctane, we need to convert the mass of isooctane to moles using its molar mass (114.23 g/mol):
n = 14.6 g / 114.23 g/mol
n = 0.128 mol
Now we can use the calculated ΔH value to find the change in enthalpy for the combustion of this amount of isooctane:
ΔH = -5256.9 kJ/mol x 0.128 mol
ΔH = -672.7 kJ
To know more about enthalpy please refer: https://brainly.com/question/13996238
#SPJ11
In the laboratory, you are given the task of separating Ca2+ and Zn2+ ions in aqueous solution. Can the reagent Na2S be used for this process? If so, write the formula of the precipitate.
Answer:
ZnS
Explanation:
Zinc sulfide is not soluble in water while Calcium sulfide is, therefore the former will precipitate but the latter won't
Determine the molecular geometry around each carbon atom in maltose. a) linear b) trigonal pyramidal c) bent d) tetrahedral e) trigonal planar
The first carbon in each glucose molecule has a linear molecular geometry; the second carbon in each glucose molecule has trigonal pyramidal molecular geometry; the third carbon has a tetrahedral molecular geometry; the fourth carbon has trigonal planar molecular geometry; and, the fifth carbon has tetrahedral molecular geometry.
The molecular geometry of maltose is complex due to the presence of multiple carbon atoms and different types of bonds.
Maltose is a disaccharide made up of two glucose molecules linked together by a glycosidic bond. Each glucose molecule has five carbon atoms. The molecular geometry around each carbon atom in maltose depends on the types of bonds and the number of lone pairs of electrons on each carbon.
a) The first carbon in each glucose molecule is part of a linear chain of atoms, so it has a linear molecular geometry.
b) The second carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal pyramidal molecular geometry.
c) The third carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement results in a tetrahedral molecular geometry.
d) The fourth carbon in each glucose molecule is bonded to three other atoms (two carbons and one oxygen) and has one lone pair of electrons. This arrangement results in a trigonal planar molecular geometry.
e) The fifth carbon in each glucose molecule is bonded to four other atoms (three carbons and one oxygen) and has no lone pairs of electrons. This arrangement also results in a tetrahedral molecular geometry.
To learn more about molecular geometry of maltose, visit: https://brainly.com/question/31044827
#SPJ11
The diagrams show gases that are stored in two separate but similar containers. 2 identical containers have gas particles, represented by small balls with arrows representing movement in random directions. The Gas 1 container has many fewer balls than the Gas 2 container. If both gases are at the same temperature, which one has the greater pressure? gas 1 because the particles are moving much faster gas 1 because it has fewer particles that are close together gas 2 because it has more particles that are colliding gas 2 because the particles have more space between them Mark this and return
Answer:
que es un compuesto ionico
A concentrated sucrose solution is poured into a cylinder of diameter 5.0 cm. The solution consisted of 10 g of sugar in 5.0 cm3 of water. A further 1.0 L of water is then poured very carefully on top of the layer, without disturbing the layer. Ignore gravitational effects, and pay attention only to diffusional processes. Find the concentration at 5.0 cm above the lower layer after a laps of the following time
a. 24 s __ M
b. 2.4 y ___ M
Since we are ignoring gravitational effects, we can assume that the sucrose solution and the water on top of it will mix through diffusion.
a)After 24 s, some diffusion will have occurred, but the concentration profile will not have fully mixed yet. We can use Fick's second law to find the concentration at 5.0 cm above the lower layer: ∂C/∂t = D(∂^2C/∂x^2).
where C is the concentration, t is time, x is distance, and D is the diffusion coefficient. Since we are only interested in the concentration at 5.0 cm above the lower layer, we can set x = 0.05 m. The diffusion coefficient for sucrose in water at room temperature is about 5.2 x 10^-10 m^2/s.
Using the initial conditions of 10 g of sugar in 5.0 cm^3 of water, we can calculate the initial concentration: C(0,0.05) = 10 g / (5.0 cm^3) = 2 g/cm^3, Now we can solve Fick's second law for C(24,0.05): C(24,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))].
erfc is the complementary error function, which can be found in tables or using a calculator. Plugging in the values, we get: C(24,0.05) = 1.10 g/cm^3
To convert to molarity, we need to divide by the molecular weight of sucrose (342.3 g/mol) and multiply by 1000 to convert from g/cm^3 to g/L: C(24,0.05) = 1.10 g/cm^3 / 342.3 g/mol * 1000 g/L = 3.21 x 10^-3 M.
b. After 2.4 years, diffusion will have had ample time to fully mix the solution. We can use the same initial conditions and diffusion coefficient as before, but now we need to solve Fick's second law for a much longer time: C(t,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))]
Plugging in the values, we get: C(2.4 years,0.05) = 0.5 g/cm^3
Converting to molarity as before, we get: C(2.4 years,0.05) = 0.5 g/cm^3 / 342.3 g/mol * 1000 g/L = 1.46 x 10^-3 M.
To know more about molarity click here
brainly.com/question/23686981
#SPJ11
help pls 50 points
Which two trends increase as you move from left to right across a period and decrease as you move down a group?
electronegativity and ionization energy
atomic radius and electronegativity
atomic radius and ionization energy
valence electrons and ionization energy
Answer:
Electronegativity and ionization energy
Answer:
Electronegativity and ionization energy
Explanation:
What type of intermediate is present in the SN2 reaction of cyanide with bromoethane?
A) carbocation
B) free radical
C) carbene
D) carbanion
E) This reaction has no intermediate.
The type of intermediate is present in the SN2 reaction of cyanide with bromoethane is reaction has no intermediate. The correct answer is E.
In the SN2 reaction of cyanide with bromoethane, SN2 reactions involve a direct, one-step process where the nucleophile (in this case, cyanide) attacks the electrophile (bromoethane) simultaneously as the leaving group (bromide ion) departs. Hence, there is no intermediate formed in an SN2 reaction.The correct answer is E.To learn more about SN2 reaction, visit:
https://brainly.com/question/25175580
#SPJ11
Consider the reaction between calcium chloride and silver nitrate to produce silver chloride and calcium nitrate.
Right and balance the equation for this reaction. Include states of matter for all compounds.
What species is the precipitate?
Write and complete the ionic equation
Identify the spectator ions
And write the net ionic equation
The balanced equation for the reaction between calcium chloride ([tex]CaCl_{2}[/tex]) and silver nitrate ([tex]AgNO_{3}[/tex]) to produce silver chloride (AgCl) and calcium nitrate ([tex]Ca(NO_{3})_{2}[/tex]) is:
CaCl2 (aq) + 2AgNO3 (aq) → 2AgCl (s) + Ca(NO3)2 (aq)
The precipitate in this reaction is silver chloride (AgCl), which is a white solid that is insoluble in water.
The ionic equation for this reaction can be written by first breaking down all the soluble compounds into their constituent ions:
Ca2+ (aq) + 2Cl- (aq) + 2Ag+ (aq) + 2NO3- (aq) → 2AgCl (s) + Ca2+ (aq) + 2NO3- (aq)
In this equation, Ca2+ and NO3- are spectator ions since they appear on both sides of the equation and do not undergo any chemical change.
The net ionic equation for the reaction can be obtained by removing the spectator ions from the ionic equation:
2Ag+ (aq) + 2Cl- (aq) → 2AgCl (s)
The net ionic equation shows only the species that participate in the actual chemical reaction, which in this case is the formation of silver chloride.
Learn more about iconic equations, here:
https://brainly.com/question/30379359
#SPJ1
be sure to answer all parts. rank the species in order of increasing nucleophilicity in acetone. a. ch3sh b. ch3oh c. ch3nh2
The order of increasing nucleophilicity in acetone is [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex]
In acetone, the nucleophilicity of a species depends on its ability to donate a pair of electrons and react with an electrophile. The three species to consider are [tex]CH_3SH (a), CH_3OH (b), and CH_3NH_2 (c)[/tex]. To rank them in order of increasing nucleophilicity, we need to analyze their electron-donating abilities, which are influenced by factors such as the size of the atom, electronegativity, and the stability of the conjugate base.
a. [tex]CH_3SH[/tex]: The sulfur atom in [tex]CH_3SH[/tex] is larger and less electronegative than oxygen and nitrogen. This makes the electron cloud more dispersed, allowing it to donate electrons more easily.
b. [tex]CH_3OH[/tex]: The oxygen atom in [tex]CH_3OH[/tex] is more electronegative than sulfur and nitrogen. However, it is a relatively small atom, which leads to a higher electron density around the oxygen, resulting in reduced nucleophilicity compared to [tex]CH_3SH[/tex].
c. [tex]CH_3NH_2[/tex]: The nitrogen atom in [tex]CH_3NH_2[/tex] is less electronegative than oxygen but more electronegative than sulfur. It is also smaller than sulfur, resulting in a more concentrated electron cloud. However, its lower electronegativity compared to oxygen makes it a better nucleophile than [tex]CH_3OH.[/tex]
In conclusion, the order of increasing nucleophilicity in acetone is as follows: [tex]CH_3OH (b) < CH_3NH_2 (c) < CH_3SH (a).[/tex] This means that [tex]CH_3SH[/tex] is the strongest nucleophile among the three species, while [tex]CH_3OH[/tex] is the weakest.
For more such questions on Nucleophilicity.
https://brainly.com/question/29563504#
#SPJ11
The following statements concern techniques used in the Titrationsexperiment. Select all the correct answers below.
A. If you rinse your buret with DI water, butdo not condition with the titrant solution, the effect is...
B. a decrease in the volume of the titrantrequired to reach the end point.
C. an increase in the volume of the titrantrequired to reach the end point.
D. an underestimation of the number ofmoles of analyte present.
E. an overestimation of the number of molesof analyte present.
The correct statements are:
A. If you rinse your buret with DI water, but do not condition with the titrant solution, the effect is...
C. an increase in the volume of the titrant required to reach the end point.
D. an underestimation of the number of moles of analyte present.
When you rinse your buret with DI water but don't condition it with the titrant solution, the residual DI water in the buret will dilute the titrant solution. This dilution will cause an increase in the volume of the titrant required to reach the endpoint. Consequently, this will lead to an underestimation of the number of moles of analyte present in the solution.
To know more about Dilution during Titrations:
https://brainly.com/question/29587514
#SPJ11
the vapor pressure of water at 20 v ◦c is 17.54 torr. using this data and ∆h ap= 40.65 kj/mol for water calculate ∆g0 298 for the change h2o(`) → h2o(g)?
The vapor pressure of water at 25°C (298 K) is approximately 606.8 atm, b- the standard free energy change for the change H2O(l) → H2O(g) is -32.5 kJ/mol.
To calculate ∆G°298 for the change H2O(l) → H2O(g), we need to use the following thermodynamic equation:
∆G°298 = ∆H°298 - T∆S°298
where ∆H°298 is the standard enthalpy change, ∆S°298 is the standard entropy change, and T is the temperature in Kelvin.
First, we need to calculate ∆S°298 for the change H2O(l) → H2O(g). We can use the Clausius-Clapeyron equation:
ln(P2/P1) = (∆Hvap/R)(1/T1 - 1/T2)
where P1 is the vapor pressure of water at temperature T1, P2 is the vapor pressure of water at temperature T2, ∆Hvap is the enthalpy of vaporization of water, R is the gas constant (8.314 J/mol*K), and T1 and T2 are the temperatures in Kelvin.
We are given that the vapor pressure of water at 20°C (293 K) is 17.54 torr. We can convert this to atmospheres (atm) by dividing by 760 torr/atm:
P1 = 17.54/760 = 0.023 atm
We are also given ∆Hvap = 40.65 kJ/mol. Converting this to J/mol and dividing by R gives:
(40.65 * 1000 J/mol) / (8.314 J/mol*K) = 4891 K
using this value, along with T1 = 293 K and T2 = 298 K, we can solve for ln(P2/P1)
ln(P2/0.023) = (4891 K)(1/293 K - 1/298 K)
ln(P2/0.023) = 26.84
P2/0.023 =e(26.84)
P2 = 606.8 atm
Next, we can calculate ∆S°298 using the equation:
∆S°298 = ∆H°vap/T + R ln(P2/P1)
∆S°298 = (40.65 * 1000 J/mol) / (298 K) + 8.314 J/mol*K * ln(606.8/0.023)
∆S°298 = 109.0 J/mol*K
Now we can plug in the values for ∆H°298 and ∆S°298, along with T = 298 K, into the equation for ∆G°298:
∆G°298 = ∆H°298 - T∆S°298
∆G°298 = (0 kJ/mol) - (298 K)(109.0 J/mol*K)
∆G°298 = -32.5 kJ/mol
learn more about standard free energy here:
https://brainly.com/question/15876696
#SPJ11
A substance that causes the oxidation of another substance is called an oxidizing agent.
a. true
b. false
The given statement, A substance that causes the oxidation of another substance is called an oxidizing agent is True because the oxidizing agent is a substance that causes the oxidation of another substance.
Oxidation is a chemical reaction in which electrons are transferred from one molecule to another, resulting in the formation of new molecules. Oxidizing agents can be various compounds such as oxygen, halogens, and certain metal ions.
Oxygen is the most common oxidizing agent and is used in many oxidation reactions. Halogens, such as chlorine, bromine and iodine, are also used as oxidizing agents in certain reactions.
Metal ions, such as iron, copper and manganese, may also act as oxidizing agents in reactions. Oxidizing agents are essential in biological processes such as respiration and metabolism, as well as industrial processes such as electricity generation and chemical manufacturing.
Know more about oxidizing agent here
https://brainly.com/question/10547418#
#SPJ11
write a balanced net ionic equation for the reaction of nibr2(aq) with (nh4)2s(aq).
The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:
Ni2+(aq) + S2-(aq) → NiS(s)
Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.
Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.
Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.
Visit here to learn more about spectator ions brainly.com/question/28913274
#SPJ11
The balanced net ionic equation for the reaction of NiBr2(aq) with (NH4)2S(aq) is:
Ni2+(aq) + S2-(aq) → NiS(s)
Note that the spectator ions NH4+ and Br- do not participate in the reaction and are not included in the net ionic equation.
Spectator ions are ions that do not participate in a chemical reaction, meaning they do not undergo any chemical change during the reaction. They are present in both the reactants and the products and do not affect the outcome of the reaction.
Spectator ions can be identified by looking at the balanced chemical equation of the reaction and canceling out ions that appear on both sides of the equation.
Visit here to learn more about spectator ions brainly.com/question/28913274
#SPJ11
In the traditional saponification process, what substance is added to a fat to produce glycerol and soap molecules? A. A strong acid B. A buffer C. A strong base D. A weak acid E. A weak base
In the traditional saponification process, a strong base (C) is added to a fat to produce glycerol and soap molecules.
What is Saponification Process?The strong base breaks the ester bonds in the fat, resulting in the formation of glycerol and fatty acid salts, which are soap molecules.
This is a hydrolysis reaction where the ester bonds in the fat or oil are cleaved by the base, resulting in the formation of glycerol (also known as glycerin) and fatty acid salts, which are soap molecules. The process involves the reaction of the base with the triglycerides (fats) present in the fat or oil, leading to the production of soap, which can be used for cleaning and emulsifying properties, and glycerol, which has various applications in cosmetics, food, and pharmaceutical industries.
To know more about Saponification Process:
https://brainly.com/question/2263502
#SPJ11
How does mass relate to density?
Answer:
Density is grams / cm^3
Explanation:
Since The formular for density is mass over volume, most commonly cm^3, we can find the mass of a quantity given the volume. Say D=.5 g/cm^3. If we have 1 mL of a substance then we do 1 mL = 1cm^3
1 cm^3 x (.5 g / cm^3) = .5 g of the substance
when one of the ions of the compound is already present in solution, its concentration at equilibrium will be higher, therefore making ksp larger.
True False
The statement "when one of the ions of the compound is already present in solution, its concentration at equilibrium will be higher, therefore making Ksp larger" is false, because Ksp remains constant if the concentration at equilibrium Will be higher.
The presence of one of the ions in the solution does not make the Ksp larger. The Ksp (solubility product constant) is a fixed value for a particular compound at a specific temperature, and it does not change based on the concentration of the ions in the solution. The ion concentrations may affect the position of the equilibrium, but the Ksp value remains constant.
Learn more about Ksp: https://brainly.com/question/23719355
#SPJ11
A student used an average of 11.28 mL of
0.008500 mol/L KMnO4 (aq) to titrate 10.00
mL of diluted acidified hydrogen peroxide.
Determine the concentration of the stock
hydrogen peroxide in mol/L if it was diluted by
a factor of 30. (Record your answer to four
decimal places)
Answer: The concentration of the stock hydrogen peroxide solution is 0.0086 mol/L (rounded to four decimal places).
Explanation:
5 H2O2 + 2 KMnO4 + 3 H2SO4 → K2SO4 + 2 MnSO4 + 8 H2O + 5 O2
moles H2O2 = (0.008500 mol/L) x (11.28 mL/1000 mL) x 30 = 0.009684 mol
Since 10.00 mL of the diluted solution was titrated, the number of moles of H2O2 in the undiluted (stock) solution is:
moles H2O2 = (0.009684 mol/11.28 mL) x 10.00 mL = 0.008577 mol
concentration = moles H2O2/volume of stock solution = 0.008577 mol/L
Answer:
0.7191 mol/L
Explanation:
To solve it, we need to use the information given to determine the number of moles of potassium permanganate (KMnO4) that were used in the titration. The concentration of the KMnO4 solution is 0.008500 mol/L and the average volume used in the titration was 11.28 mL, so the number of moles of KMnO4 used is (0.008500 mol/L) * (11.28 mL) * (1 L / 1000 mL) = 0.00009588 mol.
The balanced chemical equation for the reaction between potassium permanganate and hydrogen peroxide in an acidic solution is:
2MnO4- + 5H2O2 + 6H+ -> 2Mn2+ + 5O2 + 8H2O
According to this equation, two moles of MnO4- react with five moles of H2O2. This means that for every two moles of MnO4- that react, five moles of H2O2 are consumed.
Since we have 0.00009588 moles of MnO4-, we can expect that (5 moles H2O2 / 2 moles MnO4-) * 0.00009588 moles MnO4- = 0.0002397 moles of H2O2 were consumed in the reaction.
The volume of the diluted hydrogen peroxide solution that was titrated was 10.00 mL, so its concentration is (0.0002397 mol) / (10.00 mL) * (1000 mL / L) = 0.02397 mol/L.
Since this solution was diluted by a factor of 30, the concentration of the stock hydrogen peroxide solution must be 30 times greater than the concentration of the diluted solution: 30 * 0.02397 mol/L = 0.7191 mol/L.
What is the volume of 4.56 moles of gas at 0.634 atm and 75 °C?
Show your work
Answer:
Volume = 205
Explanation:
Using; PV = nRT
P (Pressure) = 0.634atm
V (Volume) = ?
n (Number of moles) = 4.56mol
R (Universal Gas Constant) = 0.082
T (Absolute Temperature) = 75+273 = 348K
0.634 × V = 4.56 × 0.082 × 348
V = 130.12416 ÷ 0.634
V = 205
In the laboratory, you are given the task of separating Ca2+ and Ba2+ ions in aqueous solution. Can the reagent Na2CO3 be used for this process? If so, write the formula of the precipitate.
Na2CO3 (sodium carbonate) can be used to separate Ca2+ and Ba2+ ions in aqueous solution. When Na2CO3 is added to the solution, it will react with the Ca2+ and Ba2+ ions to form insoluble carbonates, which will precipitate out of the solution. The formulas of the precipitates are CaCO3 (calcium carbonate) and BaCO3 (barium carbonate).
For calcium ions (Ca2+), the reaction is:
Ca2+ (aq) + CO3^2- (aq) → CaCO3 (s)
For barium ions (Ba2+), the reaction is:
Ba2+ (aq) + CO3^2- (aq) → BaCO3 (s)
A precipitation reaction is a reaction taking place in an aqueous solution in which two ionic bonds join, resulting in the formation of an insoluble salt. The insoluble salts formed in these reactions are called precipitates. These reactions can be used to find the presence of a particular element in the given solution.
The precipitates formed in this question are calcium carbonate (CaCO3) and barium carbonate (BaCO3). These solid precipitates can be separated from the aqueous solution by filtration or centrifugation.
For more questions on precipitation reactions: https://brainly.com/question/29990706
#SPJ11
Na2CO3 (sodium carbonate) can be used to separate Ca2+ and Ba2+ ions in aqueous solution. When Na2CO3 is added to the solution, it will react with the Ca2+ and Ba2+ ions to form insoluble carbonates, which will precipitate out of the solution. The formulas of the precipitates are CaCO3 (calcium carbonate) and BaCO3 (barium carbonate).
For calcium ions (Ca2+), the reaction is:
Ca2+ (aq) + CO3^2- (aq) → CaCO3 (s)
For barium ions (Ba2+), the reaction is:
Ba2+ (aq) + CO3^2- (aq) → BaCO3 (s)
A precipitation reaction is a reaction taking place in an aqueous solution in which two ionic bonds join, resulting in the formation of an insoluble salt. The insoluble salts formed in these reactions are called precipitates. These reactions can be used to find the presence of a particular element in the given solution.
The precipitates formed in this question are calcium carbonate (CaCO3) and barium carbonate (BaCO3). These solid precipitates can be separated from the aqueous solution by filtration or centrifugation.
For more questions on precipitation reactions: https://brainly.com/question/29990706
#SPJ11
Why do the Group A compounds, each with the same concentration (0.05 M), have such large differences in conductivity values? Hint: Write an equation for the dissociation of each. Explain.
Conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.
The Group A compounds with the same concentration (0.05 M) have large differences in conductivity values because their degree of dissociation varies. The degree of dissociation refers to the extent to which a compound breaks down into its constituent ions in a solution.
For example, let's consider two Group A compounds: sodium chloride (NaCl) and calcium chloride (CaCl2). NaCl dissociates completely in water to form Na+ and Cl- ions, while CaCl2 dissociates partially to form Ca2+ and 2Cl- ions.
The dissociation equation for NaCl is: NaCl → Na+ + Cl-
The dissociation equation for CaCl2 is: CaCl2 → Ca2+ + 2Cl-
Since NaCl dissociates completely, it produces a higher concentration of ions in solution, resulting in higher conductivity. On the other hand, CaCl2 only partially dissociates, resulting in a lower concentration of ions in solution and lower conductivity.
Therefore, the differences in conductivity values between Group A compounds with the same concentration (0.05 M) can be attributed to their varying degree of dissociation.
The Group A compounds have large differences in conductivity values at the same concentration (0.05 M) due to the varying degrees of dissociation and the number of ions produced by each compound when dissolved in a solution.
For instance, consider two Group A compounds, A1X and A2X2:
1. A1X dissociates as:
A1X → A1⁺ + X⁻
In this case, one molecule of A1X produces two ions in the solution.
2. A2X2 dissociates as:
A2X2 → A2⁴⁺ + 2X²⁻
Here, one molecule of A2X2 produces three ions in the solution.
Since conductivity depends on the number of ions present in the solution and their mobility, a compound that produces more ions will have higher conductivity. In this example, A2X2 will have higher conductivity than A1X due to the greater number of ions it produces.
To learn more about Conductivity, click here:
brainly.com/question/31364875
#SPJ11
Using only the periodic table, arrange the following elements in order of increasing ionization energy:
arsenic, selenium, potassium, gallium
The following elements in order of increasing ionization energy:
Potassium < Gallium < Arsenic < Selenium
What are elements?Elements are compounds that cannot be chemically reduced by conventional chemical processes into simpler ones. They only contain one kind of atom, one with a particular number of protons in the nucleus.
Ionization energy tends to increase over a period from left to right and decrease down a group. As potassium belongs to the first group of elements (alkali metals) and only has one valence electron, it has the lowest ionization energy among the other elements. Because it belongs to the third group of post-transition metals and has three valence electrons, gallium has a somewhat greater ionization energy. Due to its five valence electrons and position in the same period as gallium but one group to the right (metalloids), arsenic has a higher ionization energy than gallium. Because it belongs to the same group as oxygen (chalcogens) and has six valence electrons, selenium has the highest ionization energy of the four elements mentioned.
To know more about elements, visit:
brainly.com/question/1580815
#SPJ1
what volume of a 25M solution can be prepared with 28.5g of K2S molar mass 110.26g
Answer:
10.34 mL
Explanation:
The molar mass of K2S is 110.26g/mol.
Number of moles of K2S = mass / molar mass
Number of moles of K2S = 28.5g / 110.26g/mol = 0.2586 mol
Now, we can use the definition of molarity to calculate the volume of the solution that can be prepared.
Molarity = number of moles / volume of solution (in liters)
Rearranging the equation, we get:
Volume of solution = number of moles / molarity
Volume of solution = 0.2586 mol / 25 mol/L = 0.010344 L = 10.34 mL
Therefore, 10.34 mL of a 25M solution of K2S can be prepared from 28.5g of K2S.
how many mmol of naoh will react completely with 50. ml of 1.9 m h2c2o4 ?
Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.
To determine how many mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4, we first need to find the mmol of H2C2O4:
moles of H2C2O4 = (1.9 mol/L) * (50 mL * (1 L / 1000 mL)) = 0.095 mol H2C2O4
Since the balanced equation for the reaction between NaOH and H2C2O4 is:
H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O
From the balanced equation, 2 moles of NaOH react with 1 mole of H2C2O4. Therefore, we can find the mmol of NaOH:
mmol of NaOH = 0.095 mol H2C2O4 * (2 mol NaOH / 1 mol H2C2O4) = 0.19 mol NaOH
Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.
Know more about Balanced Chemical Equation here:
https://brainly.com/question/28383671
#SPJ11