Explanation:
transfer to babes are always at your advice by a particular motion being a particular wave motion along didn't wave is a wave which particular is a medium move a direction parallel to the direction of the wave moves something that is similar in the surveys on the medium moves of the same direction and bathe an accident to one or two Dimensions do in London killing babe attacks in one dimension and transverse waves attacks in two Dimensions the Waze cannot be paralyzed or organized
Indicate the direction of the magnetic force. A positive charge travels to the right of the page through a magnetic field that points into the page. Which way does the magnetic force point?
A. Up along the page
B. Down along the page
C. Left
D. Right
PLS HELP ㅠㅠ
Explanation:
A. Up along the page
Using the law of the right hand
a certain child's near point is 11.0 cm; her far point (with eyes relaxed) is 133 cm. each eye lens is 2.00 cm from the retina. (a) Between what limits, measured in diopters, does the power of this lens–cornea combination vary? lower bound
The lower bound of the power of the lens-cornea combination is 11.0 diopters.
What is lower bound of the power?
The lower bound of the power refers to the minimum value or limit of the power of a lens or lens-cornea combination. In the context of vision correction, the lower bound of the power represents the minimum power required to correct a specific visual condition.
The power of a lens is given by the formula:
Power (P) = 1 / focal length (f)
We can calculate the focal length using the formula:
f = 1 / (near point distance)
Given:
Near point distance = 11.0 cm
Substituting this value into the formula for focal length:
f = 1 / 11.0 cm
f ≈ 0.0909 cm⁻¹
Now, we can calculate the power using the formula for power:
P = 1 / f
P = 1 / 0.0909 cm⁻¹
P =11.0 diopters
Therefore, the lower bound of the power of the lens-cornea combination is 11.0 diopters.
To learn more about lower bound of the power,
https://brainly.com/question/16610860
#SPJ4
what is the phenomenon that allows the sun's heat to pass through to the earth's surface while stopping it from spreading back into space?
The phenomenon that allows the Sun's heat to pass through to the Earth's surface while stopping it from spreading back into space is the greenhouse effect.
What is the greenhouse effect?In Science, the greenhouse effect can be defined as a terminology that is used by scientists and researchers to describe the role that greenhouse gases such as carbon dioxide, methane, and water vapor, play in keeping the temperature of planet Earth warm.
Generally speaking, greenhouse effect help in the regulation of atmospheric temperature during the day and at night.
However, it is important to note that the greenhouse effect does not result in a fall or decrease in sea levels and lower rainfall in coastal zones.
Read more on greenhouse effect here: brainly.com/question/19521661
#SPJ4
FIGURE 1
FIGURE 2
FIGURE I Shows Faraday dise which is used to produce em
the roter and will be rotated by rotating the driving wheel
This device has a solid disc as
1 Discuss any inventions in history which are related to magnetism.
2. Faraday dise requires magnetic field to operate. Discuss the working principles of
Faraday disc by referring to FIGURE 2 as guideline.
3. Refer to FIGURE 2, for the indicated rotation (clockwise rotation viewed from
lenwand). Explain the existence of magnetic force and its direction on those electrons
along the conducting path,
4. Compare the magnitude of magnetic force on clectrons located at the rim and at near
the centre of the dise?
5. Discuss the required equations in order to determine the work done by magnetic force
in moving charge along the radial line between the centre and the rim? State the relation
between work done and generated emty
1. Some inventions in history which are related to magnetism include the compass, the electromagnet, and the electric motor. The discovery of magnetism dates back to around 600 B.C. in China when they found a naturally occurring magnetic rock, which is now called magnetite. They discovered that the magnetic rock had an effect on iron.
2. Faraday disc requires a magnetic field to operate. It works based on electromagnetic induction. The principles of the Faraday disc can be explained using FIGURE 2. When a magnetic field is applied perpendicular to a disc, it creates a voltage difference between the center and the outer edge of the disc. This voltage can be used to power an electrical device.3. The Faraday disc produces a magnetic force on electrons that are moving along the conducting path. The magnetic force acts perpendicular to the direction of the electron's velocity and the magnetic field.
.4. The magnitude of the magnetic force is greater on the electrons located at the rim than on the electrons located at the center of the disc. The magnetic force is directly proportional to the distance from the center of the disc. Therefore, the magnetic force is stronger at the rim than at the center.5. The work done by the magnetic force in moving a charge along the radial line between the center and the rim is given by the formula W = (1/2)mv². The relation between work done and generated emf is given by the formula W = qEMF.
To know more about electromagnetic visit :
https://brainly.com/question/23727978
#SPJ11
as you drive from the equator toward the north pole, how would the altitude of the celestial north pole star change?
As you drive from the equator toward the north pole, the altitude of the celestial north pole star would increase.
This is due to the Earth's rotation on its axis, which causes the celestial pole to appear to move around the sky in a circle once every 24 hours. The altitude of the celestial north pole star is equal to the observer's latitude, so as you move towards the north pole, your latitude increases and so does the altitude of the celestial north pole star. At the equator, the celestial pole is located on the horizon, so the altitude of the celestial north pole star would be zero.
However, as you move towards the north pole, the altitude of the celestial north pole star would increase until it reaches 90 degrees at the north pole. In conclusion, the altitude of the celestial north pole star would increase as you drive from the equator toward the north pole, this is due to the Earth's rotation on its axis, which causes the celestial pole to appear to move around the sky in a circle once every 24 hours. The altitude of the celestial north pole star is equal to the observer's latitude, so as you move towards the north pole, your latitude increases and so does the altitude of the celestial north pole star.
To know more about Earth's rotation visit:
https://brainly.com/question/14419603
#SPJ11
The input cylinder has a radius of .01 m and you are able to apply a force of 200 N to it. What radius do you need to make the output cylinder if the vehicles you are going to work have a mass of 2500 kg.
The radius of the output cylinder is 0.11 m.
Radius of the input cylinder, r₁ = 0.01 m
Input force applied, F₁ = 200 N
Mass of the output cylinder, m₂ = 2500 kg
Since more collisions with the piston occur when the area is increased but the number of molecules per cubic centimetre remains constant, the force is proportional to the area.
Force applied on the output cylinder = Weight of the output cylinder
F₂ = m₂g
F₂ = 2500 x 9.8
F₂ = 245 x 10²N
We know that the force applied on an object is directly proportional to the area of the object.
F ∝ A
So, F₁/F₂ = A₁/A₂
F₁/F₂ = (r₁/r₂)²
200/24500 = (r₁/r₂)²
Therefore, the radius of the output cylinder is,
r₂ = r₁√(24500/200)
r₂ = 0.01 x√122.5
r₂ = 0.01 x 11.06
r₂ = 0.11 m
To learn more about force, click:
https://brainly.com/question/32684929
#SPJ1
1:How are energy and amplitude of a wave related
2:Define Wavelength
3:What unit is the frequency of a wave measured in?
Please help this is due in 25 minutes
Answer:
2
Explanation:
wave length is the distance between corresponding points of two consecutive waves
3. hertz
A boy throws a ball vertically up. It returns to the
ground after 5 seconds. Find
(a) the maximum height reached by the ball.
(b) the velocity with which the ball is thrown up.
Answer:
31.25 m
25m/sec
Explanation:
Given :-
Time = 5sec
V = 0 (in going up)
U = 0 (in comming down)
Find :-
H and U by which it is thrown up
Since the total time is 5 sec ,therefore half time will be taken to go up and another half will be taken to go down .
We know that ,
V = U + gt
0 = U - 10*2.5
U = 25 m/sec
Also,
V² = U² +2gs
0 = 625 - 20s
s = 625/20 = 31.25 m
Two 10.-ohm resistors have an equivalent resistance of 5.0 ohms when connected in an electric circuit with a source of potential difference. Using circuit symbols found below, draw a diagram of this
circuit.
The resistors are connected in parallel between the terminals of a battery.
Note: If those resistors are connected in parallel, then their equivalent resistance is already 5 ohms, even if they're still in the drawer or in a box on the shelf. They don't have to be connected to a source of voltage for that to happen.
state two other ways in which evaporation is different from boiling
TRUE / FALSE.
1) True or False: The exact evolutionary track that a star follows after leaving the main sequence is dependent on the mass of the star.
2) True or False: Helium can never be fused into a higher mass element.
3) True or False: Helium fusion occurs at a lower temperature than Hydrogen fusion.
4) True or False: The Helium Flash is the beginning of Helium fusion in a low mass star that begins explosively.
1)True: The exact evolutionary track that a star follows after leaving the main sequence is indeed dependent on its mass.
2) False: Helium can indeed be fused into higher mass elements under specific conditions.
3)True: Helium fusion generally occurs at a lower temperature compared to hydrogen fusion.
4)True: The Helium Flash marks the beginning of helium fusion in a low-mass star, and it does occur explosively.
True: The exact evolutionary track that a star follows after leaving the main sequence is indeed dependent on its mass.
The mass of a star determines its core temperature, pressure, and density, which in turn dictate the dominant nuclear reactions and subsequent stages of stellar evolution.
High-mass stars follow a different evolutionary path than low-mass stars due to their contrasting internal conditions.
False: Helium can indeed be fused into higher mass elements under specific conditions.
Helium fusion occurs in the core of stars during certain stages of stellar evolution. In low-mass stars like our Sun, helium fusion transforms helium nuclei (alpha particles) into carbon through a series of nuclear reactions known as the triple-alpha process.
In more massive stars, helium can further fuse into heavier elements such as oxygen, neon, and beyond, leading to the synthesis of elements up to iron in the stellar core.
True: Helium fusion generally occurs at a lower temperature compared to hydrogen fusion.
In stars, hydrogen fusion, which primarily takes place during the main sequence phase, involves the conversion of hydrogen nuclei (protons) into helium through the proton-proton chain or the CNO cycle. This process requires higher temperatures (around millions of Kelvin) to overcome the electrostatic repulsion between positively charged protons.
On the other hand, helium fusion occurs at higher densities but lower temperatures (in the tens of millions of Kelvin), where the helium nuclei have sufficient kinetic energy to overcome the stronger Coulomb repulsion between two positively charged alpha particles.
True: The Helium Flash marks the beginning of helium fusion in a low-mass star, and it does occur explosively.
When a low-mass star exhausts its core hydrogen fuel, it begins to contract due to gravitational forces. The increased pressure and temperature cause the core to become hot enough for helium fusion to start.
However, in low-mass stars, the initial conditions for helium fusion are not met smoothly, resulting in a rapid and explosive increase in temperature and pressure, known as the Helium Flash.
This flash is followed by a stable phase of helium fusion, during which the star enters the red giant phase.
To know more about star visit:
https://brainly.com/question/13046284
#SPJ11
A tank is 6 m long, 4 m wide, 5 m high, and contains kerosene with density 820 kg/m3 to a depth of 4.5 m. (Use 9.8 m/s2 for the acceleration due to gravity.)
(a) Find the hydrostatic pressure on the bottom of the tank. ___ Pa
(b) Find the hydrostatic force on the bottom of the tank. ___ N
(c) Find the hydrostatic force on one end of the tank. ___ N
(a)The hydrostatic pressure on the bottom of the tank is 35,910 Pa
(b)The hydrostatic force on the bottom of the tank is 913,104 N
(c)The hydrostatic force on one end of the tank is 117.6 N
(a) Hydrostatic pressure on the bottom of the tank. The hydrostatic pressure is given by the formula: P = ρghWhereP is pressureρ is density g is acceleration due to gravity h is height. We are given: Length of the tank, l = 6 m Width of the tank, w = 4 m. Height of the tank, h = 5 m. Density of kerosene, ρ = 820 kg/m3Depth of kerosene, d = 4.5 m Acceleration due to gravity, g = 9.8 m/s2We need to find the hydrostatic pressure at the bottom of the tank, which is:P = ρghP = 820 * 9.8 * 4.5P = 35,910 Pa. Therefore, the hydrostatic pressure on the bottom of the tank is 35,910 Pa.
(b) Hydrostatic force on the bottom of the tank .The hydrostatic force on the bottom of the tank is given by the formula: F = ρgVWhereF is forceρ is density g is acceleration due to gravity V is volume We are given: Length of the tank, l = 6 m Width of the tank, w = 4 m Height of the tank, h = 5 m Density of kerosene, ρ = 820 kg/m3Depth of kerosene, d = 4.5 m Acceleration due to gravity, g = 9.8 m/s2We need to find the hydrostatic force on the bottom of the tank, which is: F = ρgVThe volume of the tank is given by: lwh = 6 × 4 × 5 = 120 m3The volume of the kerosene is given by: ldw = 6 * 4* 4.5 = 108 m3.The volume of the kerosene is less than the volume of the tank. So the kerosene fills only a part of the tank and the hydrostatic force acts only on the part that is filled with kerosene. The volume of the kerosene is the displaced volume of the kerosene, so: V = 108 m3The hydrostatic force is: F = ρgVF = 820 * 9.8 * 108F = 913,104 N. Therefore, the hydrostatic force on the bottom of the tank is 913,104 N.
(c) Hydrostatic force on one end of the tank We need to find the hydrostatic force on one end of the tank. The end that has dimensions of 4 m x 5 m. Let us assume that the direction along the length of the tank is x, and the direction along the width of the tank is y. The force on one end of the tank will act in the x-direction only, and is given by: F = PA where P is pressure A is area We already know the hydrostatic pressure on the bottom of the tank. We can also find the hydrostatic pressure at the end of the tank, which is at the same height as the bottom of the tank. The depth of kerosene at this end of the tank is given by:4.5 - 5 = -0.5 m. The negative depth indicates that there is no kerosene at this end of the tank. So the hydrostatic pressure is due to the weight of the air above this end of the tank. The hydrostatic pressure at this end of the tank is given by: P = ρghP = 1.2 * 9.8 * 0.5P = 5.88 Pa. The area of the end of the tank is given by: A = lw A = 4 * 5A = 20 m2The hydrostatic force on one end of the tank is: F = PAF = 5.88 * 20F = 117.6 N. Therefore, the hydrostatic force on one end of the tank is 117.6 N.
learn more about hydrostatic pressure Refer: https://brainly.com/question/32200319
#SPJ11
you are on a snorkeling trip. deep below the water, you look up at the surface of the water.
At sunset, the angle from the vertical at which you see the sun while snorkeling deep below the water's surface is approximately 42 degrees.
When observing the sun from underwater, we need to consider the phenomenon of refraction, which causes the light to bend as it passes from one medium (air) to another (water). This bending of light is what allows us to see objects above the water's surface from underwater.
To determine the angle at which we see the sun, we can use Snell's Law, which relates the angles of incidence and refraction for light passing through different media. Snell's Law states:
n₁ * sin(θ₁) = n₂ * sin(θ₂)
Where:
n₁ and n₂ are the refractive indices of the two media (air and water, respectively).
θ₁ is the angle of incidence (the angle between the incoming light ray and the normal to the water's surface).
θ₂ is the angle of refraction (the angle between the refracted light ray and the normal to the water's surface).
The refractive index of air is approximately 1.0003, and the refractive index of water is around 1.333. Since the light is coming from the air into the water, we can assume θ₁ (angle of incidence) to be 90 degrees, as it is perpendicular to the water's surface.
Using Snell's Law, we can calculate θ₂:
1.0003 * sin(90°) = 1.333 * sin(θ₂)
Simplifying the equation:
sin(θ₂) = (1.0003 / 1.333) * sin(90°)
sin(θ₂) ≈ 0.750
To find θ₂, we take the inverse sine (arcsine) of 0.750:
θ₂ ≈ arcsin(0.750)
θ₂ ≈ 48.6 degrees
However, this angle represents the angle from the normal to the water's surface, not the angle from the vertical. To find the angle from the vertical, we subtract θ₂ from 90 degrees:
The angle from the vertical = 90° - θ₂
The angle from the vertical ≈ 90° - 48.6°
The angle from the vertical ≈ 41.4 degrees
Rounded to two significant figures, the angle from the vertical at which you would see the sun at sunset while snorkeling deep below the water's surface is approximately 42 degrees.
When snorkeling deep below the water's surface and looking up at the sun during sunset, the sun would appear at an angle of approximately 42 degrees from the vertical. This angle takes into account the bending of light due to refraction as it passes from air to water.
To learn more about Angle, visit
https://brainly.com/question/13200721
#SPJ11
a current of 7.07 a in a long, straight wire produces a magnetic field of 8.21 μt at a certain distance from the wire. find this distance.
The distance from the wire at which a current of 7.07 A produces a magnetic field of 8.21 μT is approximately 0.287 meters (or 28.7 cm).
We can use Ampere's law to calculate the magnetic field produced by a current-carrying wire at a certain distance from it.
Ampere's law states that the magnetic field around a long, straight wire is directly proportional to the current and inversely proportional to the distance from the wire.
Mathematically, Ampere's law can be written as:
B = (μ₀ * I) / (2π * r),
where:
B is the magnetic field (in Tesla),
μ₀ is the permeability of free space (4π × 10^(-7) T·m/A),
I is the current in the wire (in Amperes), and
r is the distance from the wire (in meters).
We are given the current I = 7.07 A and the magnetic field B = 8.21 μT. To find the distance r, we need to rearrange the equation and solve for r:
r = (μ₀ * I) / (2π * B).
Now we can substitute the given values and calculate the distance:
r = (4π × 10^(-7) T·m/A * 7.07 A) / (2π * 8.21 × 10^(-6) T)
≈ (2.828 × 10^(-6) T·m²/A) / (1.646 × 10^(-5) T)
r ≈ 0.1715 m.
Therefore, the distance from the wire is approximately 0.1715 meters or 17.15 cm.
The distance from the wire at which a current of 7.07 A produces a magnetic field of 8.21 μT is approximately 0.287 meters (or 28.7 cm).
To know more about current visit:
https://brainly.com/question/1100341
#SPJ11
an electromagnetic plane wave has an intensity average=800 w/m2. what are the rms values rms and rms of the electric and magnetic fields, respectively?
The RMS values of the electric and magnetic fields are approximate:
Electric field RMS (Erms) ≈ 4.015 x 10⁻⁴ N/C
Magnetic field RMS (Brms) ≈ 1.338 x 10⁻¹² T
The relationship between the intensity, electric field, and magnetic field of an electromagnetic wave is given by:
Intensity = (1/2) x c x ε₀ x E₀²
where:
Intensity is the average power per unit area (in watts per square meter, W/m²).
c is the speed of light in a vacuum (approximately 3 x 10⁸ m/s).ε₀ is the permittivity of free space (approximately 8.854 x 10⁻¹² F/m).E₀ is the amplitude (peak value) of the electric field.To calculate the RMS (root mean square) values of the electric and magnetic fields, we can use the following relationships:Electric field RMS (Erms) = E₀ / √2
Magnetic field RMS (Brms) = (Erms / c)
Let's calculate the RMS values:
Given:
Intensity average (I_avg) = 800 W/m²
Calculate the amplitude (E₀) of the electric field.
Intensity = (1/2) x c x ε₀ x E₀²
E₀² = (2 x Iavg) / (c x ε₀)
E₀ = √[(2 x Iavg) / (c x ε₀)]
Calculate the RMS values.
Electric field RMS (Erms) = E₀ / √2
Magnetic field RMS (Brms) = (Erms / c)
Let's substitute the values and calculate the RMS values:
E₀ = √[(2 x 800) / (3 x 10⁸ x 8.854 x 10⁻¹²)]
E₀ ≈ 5.670 x 10⁻⁴ N/C
Erms = (5.670 x 10⁻⁴) / √2
Erms ≈ 4.015 x 10⁻⁴ N/C
Brms = (4.015 x 10⁻⁴) / (3 x 10⁸)
Brms ≈ 1.338 x 10⁻¹² T
Therefore, the RMS values of the electric and magnetic fields are approximate:
Electric field RMS (Erms) ≈ 4.015 x 10⁻⁴ N/C
Magnetic field RMS (Brms) ≈ 1.338 x 10⁻¹² T
To know more about root mean square value follow
https://brainly.com/question/31325061
#SPJ4
at what altitude above the earth's surface is the acceleration due to gravity equal to g/ 7?
The altitude above the Earth's surface where the acceleration due to gravity is equal to g/7 is approximately 4.9019353 × 10^7 meters, or 49,019,353 meters, or 49,019.353 kilometers.
The acceleration due to gravity, denoted as "g," is approximately 9.8 meters per second squared (m/s²) near the Earth's surface. To determine the altitude at which the acceleration due to gravity is equal to g/7, we can use the formula for the acceleration due to gravity as a function of distance from the center of the Earth.
The formula for the acceleration due to gravity (g') at a certain distance (h) from the Earth's center is given by:
g' = (G * M) / (R + h)²
where:
- G is the gravitational constant (approximately 6.67430 × 10^(-11) m³/(kg·s²)),
- M is the mass of the Earth (approximately 5.972 × 10^24 kg),
- R is the mean radius of the Earth (approximately 6,371,000 meters),
- h is the distance above the Earth's surface.
Given that g' = g/7, we can set up the equation:
g/7 = (G * M) / (R + h)²
Rearranging the equation, we can solve for h:
h = sqrt((G * M) / (g/7)) - R
Substituting the known values, we get:
h = sqrt((6.67430 × 10^(-11) * 5.972 × 10^24) / (9.8/7)) - 6,371,000
Evaluating this equation will give us the altitude above the Earth's surface where the acceleration due to gravity is equal to g/7.
the altitude above the Earth's surface where the acceleration due to gravity is equal to g/7 is approximately 4.9019353 × 10^7 meters, or 49,019,353 meters, or 49,019.353 kilometers.
Learn more about gravity here:
https://brainly.com/question/14874038
#SPJ11
Which of the following are the two factors used to calculate average
speed? *
a. total acceleration and total time
b. velocity and time
c. total distance and total time
d. motion and time
Answer:
i think its its c but im not positive :>
Explanation:
make a rule: based on the measured force between objects that are 10 meters apart, how can you find the force between objects that are any distance apart?
By applying this rule, you can determine the force between objects at any given distance by comparing it to the force measured at a reference distance.
F1 / F2 = [tex](r2 / r1)^2[/tex]
The rule based on the measured force between objects that are 10 meters apart to find the force between objects at any distance apart is as follows:
"The force between two objects is inversely proportional to the square of the distance between them."
Mathematically, this can be expressed as:
F1 / F2 = [tex](r2 / r1)^2[/tex]
Where:
F1 is the measured force between objects at a distance r1.
F2 is the force between objects at a distance r2.
r1 is the initial distance between the objects where the force was measured.
r2 is the new distance between the objects at which the force is to be calculated.
By applying this rule, you can determine the force between objects at any given distance by comparing it to the force measured at a reference distance.
To know more about force here
https://brainly.com/question/23763915
#SPJ4
If one asteroid has an orbital period of 2 years and another an orbital period of 4 years, the orbital radius of the farther asteroid will be __ the orbital radius of the closer one. O more than twice O less than twice O twice O impossible to tell.
The orbital radius of the farther asteroid will be less than twice the orbital radius of the closer one.
The orbital radius of an object in orbit around a central body depends on its orbital period. Kepler's third law states that the square of the orbital period of a planet or asteroid is directly proportional to the cube of its orbital radius. Mathematically, this relationship can be expressed as [tex]T^2[/tex] ∝ [tex]R^3[/tex], where T is the orbital period and R is the orbital radius.
In this scenario, if one asteroid has an orbital period of 2 years and another has an orbital period of 4 years, we can compare their orbital radii. Let's assume the orbital radius of the closer asteroid is R1. According to Kepler's third law, [tex](2)^2[/tex]∝ [tex]R1^3[/tex]. Similarly, let's assume the orbital radius of the farther asteroid is R2. Therefore, [tex](4)^2[/tex] ∝ [tex]R2^3[/tex].
By comparing these two equations, we can see that [tex](4)^2/(2)^2 = R2^3/R1^3[/tex], which simplifies to [tex]4 = R2^3/R1^3[/tex]. Taking the cube root of both sides gives us [tex]R2/R1 = 3\sqrt4 = 1.587[/tex]. This means that the orbital radius of the farther asteroid will be less than twice the orbital radius of the closer one, indicating that it will be closer to the central body.
Learn more about Kepler's third law here:
https://brainly.com/question/30404084
#SPJ11
a square loop 26.5 cmcm on a side has a resistance of 4.00 ωω . it is initially in a 0.365 tt magnetic field, with its plane perpendicular to b⃗ b→, but is removed from the field in 34.0 msms .
The electric energy dissipated in the process is 1.167 J.
The electric energy dissipated in the process can be calculated using the formula:
Electric energy dissipated = (average power) * (time)
To find the average power, we need to calculate the average induced emf and the current in the loop.
The average induced emf can be calculated using Faraday's law of electromagnetic induction:
Average induced emf = (change in magnetic flux) / (change in time)
The change in magnetic flux can be calculated by subtracting the final magnetic flux (0) from the initial magnetic flux. Since the loop is perpendicular to the magnetic field, the magnetic flux through the loop is given by:
Initial flux = B * A
= 0.365 T * (0.265 m)²
= 0.3425 T·m²
The change in time is given as 34.0 ms, which is equal to 0.034 s.
Therefore, the average induced emf is:
Average induced emf = (0 - 0.3425 T·m²) / 0.034 s = -10 V/s
Using Ohm's law, we can calculate the current in the loop:
Current = emf / resistance = -10 V/s / 4.00 Ω
= -2.5 A
The average power is given by:
Average power = (current²) * resistance
= (-2.5 A)² * 4.00 Ω
= 25 W
Finally, the electric energy dissipated is:
Electric energy dissipated = (average power) * (time)
= 25 W * 0.034 s
= 1.167 J
Therefore, the electric energy dissipated in the process is 1.167 J.
To learn more about magnetic field, here
https://brainly.com/question/14848188
#SPJ4
The frequency of a sound wave is 457 Hz and the speed is
342.5 m/s. What is the sound's wavelength?
Answer:
/\ = 0.75m
Explanation:
v = f × /\
342.5= 457/\
/\ = 0.75m
an athlete whirls an 11,7 kg hammer tied to the end of a 1,2 m chain in a simple horizontal circle where you should ignore any vertical deviations. the hammer moves at the rate of 0,489 rev/s. what is the tension along the chain?
The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.
To find the tension along the chain, we can analyze the forces acting on the hammer in circular motion.
In this case, the tension in the chain provides the centripetal force required to keep the hammer moving in a circle.
The centripetal force is given by the formula:
F = m * v² / r
Where:
F is the centripetal force
m is the mass of the hammer
v is the velocity of the hammer
r is the radius of the circular path
m = 11.7 kg
v = 0.489 rev/s (angular velocity)
r = 1.2 m
To calculate the linear velocity, we need to convert the angular velocity to linear velocity. The formula for converting angular velocity to linear velocity is:
v = ω * r
Where:
v is the linear velocity
ω is the angular velocity
r is the radius of the circular path
Substituting the values, we have:
v = 0.489 rev/s * 2π radians/rev * 1.2 m
v ≈ 3.678 m/s
Now we can calculate the centripetal force:
F = (11.7 kg) * (3.678 m/s)²/ 1.2 m
F ≈ 140.79 N
Therefore, the tension along the chain is approximately 140.79 N.
The tension along the chain, when an 11.7 kg hammer is whirled at a rate of 0.489 rev/s in a simple horizontal circle with a 1.2 m chain, is approximately 140.79 N.
To know more about tension visit:
https://brainly.com/question/29466375
#SPJ11
given the velocity v=ds/dt and the initial position of a body moving alonge a coordinate line, find the body's position at time t v=9.8t 7
The position of the body at time t is given by the equation s(t) = (1/2)(9.8)(t²) + C if the velocity is v = ds/dt.
To find the body's position at time t, we need to integrate the velocity function with respect to time.
Given that v = 9.8t, we can integrate this function to find the position function, s(t).
∫v dt = ∫(9.8t) dt
Applying the power rule of integration, we have
s(t) = (1/2)(9.8)(t²) + C
Here, C is the constant of integration, which represents the initial position of the body. Since the initial position is not given in the question, we'll leave it as C for now.
To know more about velocity here
https://brainly.com/question/30559316
#SPJ4
1. What is the role of the battery in an electric circuit? a. Transformer b. Conductor c. Source d. switch
Answer:
Conductor
Explanation:
A battery holds all of the energy in itself. So without the battery, the circuit cannot work.
Hope this helped, and please mark as Brainliest <3
1.45 L of 16°C water is placed in a refrigerator. The refrigerator's motor must supply an extra 10.7 W power to chill the water to 6°C in 0.7 hr. What is the refrigerator's coefficient of performance?
Answer:
The coefficient of performance of the refrigerator is 2.251.
Explanation:
In this case, the coefficient of performance of the refrigerator ([tex]COP[/tex]), no unit, is equal to the ratio of the heat rate received from the water to the power needed to work, that is:
[tex]COP = \frac{\dot Q_{L}}{\dot W}[/tex] (1)
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex] (2)
Where:
[tex]\dot Q_{L}[/tex] - Heat rate received from the water, in watts.
[tex]\dot W[/tex] - Power, in watts.
[tex]\rho[/tex] - Density of water, in kilograms per cubic meter.
[tex]V[/tex] - Volume of water, in cubic meters.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-degree Celsius.
[tex]\Delta T[/tex] - Temperature change, in degrees Celsius.
[tex]\Delta t[/tex] - Cooling time, in seconds.
If we know that [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 1.45\times 10^{-3}\,m^{3}[/tex], [tex]c_{w} = 4187\,\frac{J}{kg\cdot ^{ \circ}C}[/tex], [tex]\Delta T = 10\,^{\circ}C[/tex], [tex]\dot W = 10.7\,W[/tex] and [tex]\Delta t = 2520\,s[/tex], then the coefficient of refrigeration of the refrigerator is:
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex]
[tex]COP = 2.251[/tex]
The coefficient of performance of the refrigerator is 2.251.
A laser produces light of wavelength 615 nm in an ultrashort pulse.
What is the minimum duration of the pulse if the minimum uncertainty in the energy of the photons is 1.0%?
The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.
According to the uncertainty principle in quantum mechanics, there is a fundamental limit to the precision with which certain pairs of physical properties, such as energy and time, can be simultaneously known. In the case of light, the uncertainty principle relates the uncertainty in energy (∆E) to the uncertainty in time (∆t) through the equation:
∆E ∆t ≥ h/2π
where ∆E is the uncertainty in energy, ∆t is the uncertainty in time, and h is Planck's constant (approximately 6.626 × 10^(-34) J·s).
We are given the uncertainty in energy as 1.0% of the total energy of the photons. This can be expressed as:
∆E = 0.01 × E
where E is the total energy of the photons.
The energy of a photon can be calculated using the equation:
E = hc/λ
where h is Planck's constant, c is the speed of light in a vacuum (approximately 3.0 × 10^8 m/s), and λ is the wavelength of the light.
Substituting the given wavelength into the equation:
E = (6.626 × 10^(-34) J·s × 3.0 × 10^8 m/s) / (615 × 10^(-9) m)
E ≈ 3.22 × 10^(-19) J
Substituting the value of ∆E into the uncertainty principle equation:
0.01 × E ∆t ≥ h/2π
0.01 × (3.22 × 10^(-19) J) ∆t ≥ (6.626 × 10^(-34) J·s) / (2π)
0.01 × (3.22 × 10^(-19) J) ∆t ≥ 1.05 × 10^(-34) J·s
∆t ≥ (1.05 × 10^(-34) J·s) / (0.01 × 3.22 × 10^(-19) J)
∆t ≥ 3.27 × 10^(-15) s
To convert the time to femtoseconds (fs), we multiply by 10^15:
∆t ≈ 3.27 fs
Therefore, the minimum duration of the pulse is approximately 3.27 femtoseconds.
The minimum duration of the pulse is approximately 3.27 femtoseconds. This calculation is based on the uncertainty principle and the given uncertainty in energy, wavelength, and Planck's constant.
To know more about Planck's constant visit:
https://brainly.com/question/30991884
#SPJ11
The numerical value for the position of the component holder of the lens is given by a. 608 mm b. None of the other offered answers. c. 599 mm d.583 mm e. 591 mm
Answer:
B is the answer
trust me
naturo na kasi samin yan eh
When dropping a grape and a bowling ball from a height, the force of gravity would be identical on each object. True or False
A.
FALSE
B.
TRUE
Answer:
I think true but im not sure sorry if this didnt help/
Explanation:
Answer:
true 50%
Explanation:
A circuit contains a single 240-pF capacitor hooked across a battery. It is desired to store four times as much energy in a combination of two capacitors by adding a single capacitor to this one. What would its value be?
To store four times as much energy in a combination of two capacitors by adding a single capacitor to this one. Thus, the capacitance of the added capacitor should be: 3(240 pF) = 720 pF.
To begin with, the energy stored by a capacitor in an electrical circuit is given by the equation:
E = 1/2CV^2...
where C is the capacitance of the capacitor and V is the voltage across it. The energy stored in the circuit is equal to the energy stored in the capacitor,
so the formula can be rewritten as follows:
E = 1/2C(∆V)^2...
where ∆V is the voltage across the capacitor.
The energy in the capacitor can be increased by increasing the capacitance or the voltage across it, or by increasing both.
The problem specifies that it is desired to store four times as much energy in a combination of two capacitors by adding a single capacitor to this one.
So, the energy stored in two capacitors can be expressed as:
E1 + E2 = 4E...
where E is the energy stored in the single capacitor and E1 and E2 are the energies stored in the two capacitors after adding the single capacitor.
Let's say the capacitance of the single capacitor is C and the capacitance of the added capacitor is C'.
Then, the total capacitance of the two capacitors can be expressed as:
C total = C + C'...
and the energy stored in each capacitor can be expressed as:
E = 1/2C(∆V)^2 and
E' = 1/2C'(∆V')^2...
where ∆V is the voltage across the single capacitor, and ∆V' is the voltage across the added capacitor.
The voltage across each capacitor is the same,
so ∆V = ∆V'.
Substituting these equations into the first equation,
we get:
1/2C(∆V)^2 + 1/2C'(∆V)^2 = 4[1/2C(∆V)^2].
which can be simplified to: C' = 3C...
Therefore, the capacitance of the added capacitor should be 3 times the capacitance of the single capacitor.
to know more about capacitors visit:
https://brainly.com/question/14562804
#SPJ11
Tom's mass is 70.0 kg, and Sam's
mass is 50.0 kg. Tom and Sam are
standing 20.0 m apart on the dance
floor. Sam looks up and sees Tom.
Sam feels an attraction. Supposing
that the attraction is gravitational,
find its size. Assume that both Tom
and Sam can be replaced by
spherical masses.
5.84Å~10−10 N
Answer:
5.84×10^-10 N
Explanation:
F=G×ms×mr/r^2
ms=50 kg
mr= 70 kg
r=20 m
F=6.67×10^-11 N×m^2/kg^2×50 kg×70 kg/(20 m)^2
F=5.84×10^-10 N
The gravitational force is [tex]5.84*10^{-10} N[/tex].
What is force of gravitation?The gravitational force is a force that attracts any two objects with mass.
[tex]F=G{\frac{m_1m_2}{r^2}}[/tex]
Where,
F = force
G = gravitational constant
[tex]m_{1}[/tex] = mass of object 1
[tex]m_{2}[/tex] = mass of object 2
r = distance between centers of the masses
[tex]m_{1}[/tex] = 70kg
[tex]m_{2}[/tex] = 50kg
r = 20 m
G = [tex]6.67*10^{-11} Nm^2/kg^2[/tex]
[tex]F= \frac{6.67*10^{-11}*70*50}{20^2}[/tex]
[tex]F = 5.84*10^{-10} N[/tex]
To learn more about Gravitational force here
https://brainly.com/question/12528243
#SPJ2