Answer:
You basically want to balance these equations.
(6)CH4 → (1)C6H6 + (9)H2
(2)C2H6 + (7)O2 → (4)CO2 + (6)H2O
NOTE: DO NOT PUT BRACKETS IN YOUR ANSWER, I HAVE PUT HERE FOR THE ANSWERS INSTEAD OF QUESTION MARKS.
In that question how( b) are enantiomers? I want the steps pleas ?
Answers:
1. firstly Start numbering from that carbon atom which would be nearest to chlorine .
2. then if u observed properly , both chlorine is attached are attached to 2nd carbon atom.
3.but in first one chlorine is on the left side
whereas in the second one chlorine right side.
p.s:
1. well, were u have number carbon three in above pic take it as C1 than C2( if u observed it is were Cl is attached to C2 ) than C3 ,C4.
2. Then similarly in second molecules where u have number C3 in above pic take it as C1 than C2 (if u observed , again Cl is attached to C2 but this time it is one on opposite sides.
now imagine if u kept first molecules on second one.
matching C1 C2 C3 C4 of first molecules with
C1 C2 C3 C4 of second molecule .
u will observed that in both of them Cl is on C2 but they in exactly opposite position
Explanation:
Enantiomers are a pair of molecules that exist in two forms that are mirror images of one another but cannot be superimposed one upon the other.
Which of the following sentences describe how latitude affects a biome? (There may be more than one answer).
Question 4 options:
In the far north, the summers are too short and cold for trees.
As you travel east, the climate gets colder.
The closer the area is near to the equator, the hotter the weather.
The higher in elevation, the colder the environment.
Answer:
A and C
Explanation:
The other answers didn't seem reasonable,
I took the quiz and got it right.
If I am wrong, please correct me
The biome can be given as the collection of flora and fauna in the region. The latitude affects the biome, with the short summers in the north and hot weather at the equator.
What is latitude?The latitude can be given as the horizontal lines imaginary drawn on the earth. The equator is the center of latitude passing from the middle of the earth.
The sun's rays fall directly towards the equator, while the poles in the north and the south experiences the transverse rays of the sun.
The direct rays falling at the equator termed the area closer to the equator warmer, while the falling rays to the north resulted in the short summers and cold for trees. Thus, options A and C are correct.
Learn more about biome, here:
https://brainly.com/question/11491362
How many moles of sodium sulfate are produced along with 5.86 moles of iron(III)
hydroxide?
Fe2(SO4)3 + 6NaOH → 3Na SO4 + 2Fe(OH)3
Answer:
5.86mol 2Fe(OH)3 * [3 mols Na SO4 / 2 mols Fe(OH)3] = 8.79 mols sodium sulfate
Explanation:
To solve this question you need to look at the ratio of sodium sulfate to iron(III) hydroxide. The ratio is 3 to 2, meaning that for every 3 moles of Na SO4 there are also 2 moles of Fe(OH)3. So, you can multiply 5.86 by (3/2) to find the mols of sodium sulfate.
what type of reaction occur in cyclohexene
Cyclohexene is a cyclic, six-membered hydrocarbon that contains one double bond. The types of reactions that can occur in cyclohexene would be those that are typical with alkenes generally.
The pi-bonded electrons in the double bond are nucleophilic. So, electrophilic addition reactions could occur with cyclohexene. For example,
cyclohexene + HBr → bromocyclohexane
cyclohexene + H2O/H+ → cyclohexanol
cyclohexene + Br2 → trans-1,2-dibromocyclohexane (racemic)
The latter is a common test for alkenes where one adds bromine to a sample to see if there is decolorization, which would indicate the presence of nucleophilic pi bonds. Bromine, which is dark reddish-brown, will become clear as it reacts with an alkene to form a colorless haloalkane.
Cyclohexene can also be converted to the fully saturated cyclohexane by hydrogenation: cyclohexene + H2/Pd → cyclohexane.
How many moles of Cs are contained in 3 moles of Cs3PO4?
Answer:
[tex]\boxed {\boxed {\sf 9 \ moles \ Cs}}[/tex]
Explanation:
We are given the compound: Cs₃PO₄
According to the formula, 1 mole of cesium phosphate contains 3 moles of cesium, 1 mole of phosphate, and 4 moles of oxygen.
Therefore, there are 3 moles of cesium for 1 mole of cesium phosphate.
[tex]\frac {3 \ mol \ Cs}{1 \ mol \ Cs_3PO_4}[/tex]
We want to calculate the moles of cesium in 3 moles of cesium phosphate, so we multiply the ratio by 3.
[tex]3 \ mol \ Cs_3PO_4 *\frac {3 \ mol \ Cs}{1 \ mol \ Cs_3PO_4}[/tex]
[tex]3 *\frac {3 \ mol \ Cs}{1 }= 9 \ mol \ Cs[/tex]
3 moles of cesium phosphate contains 9 moles of cesium.
If a system has 5.00×102 kcal of work done to it, and releases 5.00×102 kJ of heat into its surroundings, what is the change in internal energy (Δ or Δ) of the system?
Answer:
U=q+w
=5.00×10^2 +5.00×10^2
=2.5×10^5 kJ
The trait that seems to fade into the background.
Dominant
Recessive
Someone help thank you :)
thesis: physical science improves nursing through technology, energy, and Matter.
write a 4-page essay explaining how science improves Nursing career and how it revolves around
Technology
Energy
Matter
Answer:
When science educators teach nurses, their primary aim should be to help them to develop understanding of their world of nursing. From a study of registered nurses' conceptions of the physical science underlying their clinical practice, we assert that nurses' understanding of the physical sciences is inadequate in terms of the competencies required of them as nurses.
Explanation: Hopes this helps You A lot :-D
Bryan is doing a science experiment on the stomata of plants. Bryan has a tomato plant. He uses wax to cover all the stomata on the leaves of the plant. After five days, Bryan observes that the plant is wilting. What is the best explanation for Bryan’s observation?
A. The plant released too much water into the air B. The plant was unable to carry out transpiration. C. Condensation could not occur on the leaves of the plant.
D. The plant was unable to take in water through its leaves
Answer: The answer is B
The most adequate explanation for the observation done by Bryan would be:
B). The plant was unable to carry out transpiration.
Stomata are characterized as the "tiny pores present in a leaf's epidermis which allows the gas or water vapor to pass."In the given experiment, Bryan has covered these pores which will prevent the process of photosynthesis to take place. This will result in the failure of the transpiration process in the plant to take place and its associated processes as well.
Thus, option B is the correct answer.
Learn more about "Experiment" here:
brainly.com/question/11256472
a Technical
How to write
report
Write a formula and balanced equation for the following: solid copper metal reacts with aqueous silver nitrate to produce solid silver metal and aqueous copper Nitrate. How do I know if it will form copper (I) nitrate CuNO3 or copper (II) nitrate Cu(NO3)2 ?
Explanation:
copper (II) nitrate
Illustrate variety of substances of which an element can be part:
metal --> blue solution --> blue solid --> black solid --> blue solution (again) --> metal (again).When solid copper reacts with aqueous silver nitrate, the products are copper (II) nitrate and solid silver. and carbon monoxide gas produces solid iron and carbon dioxide gas.
Which of these actions precedes a precipitation event
A: clouds form
B: the air gets colder
C: the wind picks up speed
D: Raindrops are supercooled
Answer:
C. The wind picks up speed
Explanation:
Im not sure but i hope im correct
Btw goodluck:)
Lab: Enthalpy.
What were the learning goals of this lab experiment? Check all that apply.
to use mass and temperature data to do computations involving heat
to demonstrate that different reactions have different enthalpies
to compute a reaction’s enthalpy directly using mass measurements and a calorimeter
to compute the enthalpy of a reaction that cannot be measured directly using a simple calorimeter
Hess
’s law allows you to find the net enthalpy of the magnesium combustion by adding the enthalpies of intermediate reactions.
To find the enthalpy of a reaction in the lab, you measured the
mass
of the reactants
and the
temperature
change during the reaction.
In both Reactions 1 and 2, the temperature change was
positive
, meaning that the
reactions
gave off
heat.
Answer:
to use mass and temperature data to do computations involving heat
to compute a reaction’s enthalpy directly using mass measurements and a calorimeter
To find the enthalpy of a reaction in the lab, you measured the mass
of the reactants
and the
temperature
change during the reaction.
Explanation:
Was that good?
Enthalpy is a thermodynamic system's internal energy total as well as the volume times pressure ratio.
What is Enthalpy?Enthalpy is a property or state function that resembles energy; it has the same dimensions as energy and is therefore measured in joules or ergs. The value of enthalpy is solely dependent on the temperature, pressure, and composition of the system, not on its history.
Enthalpy, denoted by the symbol H, is the sum of the internal energy, denoted by E, and the product of the pressure and volume, denoted by PV.
The change in internal energy is equal to the heat transmitted to, less the work done by, the system, according to the law of energy conservation.
Therefore, Enthalpy is a thermodynamic system's internal energy total as well as the volume times pressure ratio.
To learn more about Enthalpy, refer to the link:
https://brainly.com/question/13996238
#SPJ2
Why are some resources, like fossils, found in some places and not in others?
Answer:
Because thats where the animal passed away
Explanation:
Several elements must be transmuted to sea the real implications of this event
a.surpassed
b.estimated
c.changed
d.summed
thanks guys :)
What are the products for
Answer:
[tex]ZnCO_3(s)+2KNO_3(aq)[/tex]
Explanation:
Hello there!
In this case, for the referred reactants side, we can evidence that this is a double displacement reaction whereby Zn gets bonded with CO3 and therefore K gets bonded with NO3 to yield:
[tex]Zn(NO_3)_2+K_2CO_3\rightarrow ZnCO_3+2KNO_3[/tex]
Whereas the KNO3 product is aqueous and the ZnCO3 is solid due to the corresponding solubility rules. Thereby, the answer is the third one.
Regards!
Which statement accurately describes renewable energy sources?
1. They provide the majority of the energy for the United States.
2. They take millions of years to form and should be used responsibly.
3. They are found in nearly limitless supply.
4. They include fossil fuels and hydroelectric power.
In a given compound, the mass of sulfur (S) is 40.05 g and the mass of oxygen (O) is 59.95 g. What is
the empirical formula of the compound
Answer:
[tex]SO_3[/tex]
Explanation:
Hello there!
In this case, according to the definition of the empirical formula as the smallest representation of the molecular formula of a chemical compound; for us to determine it, we first need to calculate the moles of sulfur in 40.05 g and those of oxygen in 59.95 g as shown below:
[tex]n_S=\frac{40.05g}{32.07g/mol}= 1.25molS\\\\n_O=\frac{59.95g}{16.00g/mol}=3.75molO[/tex]
Now, we perform the following mole ratios to figure out the subscripts in the empirical formula, by dividing over the fewest number of moles:
[tex]S=\frac{1.25}{1.25}=1 \\\\O=\frac{3.75}{1.25}=3[/tex]
Therefore, the empirical formula turns out:
[tex]SO_3[/tex]
Best regards!
For a theoretical yield of 23 g and actual
yield of 13 g, calculate the percent yield for a
chemical reaction.
1. 63.6364
2. 76.4706
3. 71.4286
4. 57.1429
5. 56.5217
6. 40
7. 70
8. 60
9. 52.6316
10. 41.6667
Answer in units of %.
Answer:
5. 56.5217
Explanation:
Calculate percent yield by (actual yield / theoretical yield) times 100
(13/23) x 100 = 56.52173913
Some students have said that a buffer is like a proton (H ) sponge. Evaluate this statement and explain both how a buffer is like a sponge and how it is not like a sponge. For your explanation, include chemical equations, data, and create and explain molecular-level drawings. (Question is taken from Orgill and Sutherland, 2008.) (Saloni)
Answer:
i) Buffer absorbs H^+ and OH^- ions preventing large changes in pH when small amounts of acid or base is added but when large amounts of acid or base is added there will be a change in pH
ii) absorption of liquid is related to a chemical reaction for a buffer system but it is not related a chemical reaction for a proton( H ) sponge.
Explanation:
i) Buffer like a proton ( H ) sponge
Buffer absorbs H^+ and OH^- ions preventing large changes in pH when small amounts of acid or base is added but when large amounts of acid or base is added there will be a change in pH
The pH of a Buffer follows the Henderson-Hasselbach model
pH = pKa + Log ([A-]/[HA])
when base is added
HA + OH^- -------> A- + H2O
when acid is added
A^- + H^+ ---------> HA
ii) Buffer not like a proton ( H ) sponge
absorption of liquid is related to a chemical reaction for a buffer system but it is not related a chemical reaction for a proton( H ) sponge.
How does a tree get energy?
A. It does not need energy
B. It gets energy from the Sun.
C. It eats food in its environment.
You are given three liquids, pentane (C5H12), water (H2O), and tetrachloromethane (CCl4), and are told to make solutions.
a. Predict whether you will be able to make a solution with pentane and tetrachloromethane
b. Predict whether you will be able to make a solution with pentane and water, and give your reasoning.
Answer:
A. predict whether you will be able to make a solution with pentane and tetrachloromethane
Explanation:
Sana nakatulong
if 23.1g of O2 occupies a volume of 5.0L at a particular temperature and pressure, what volume will 2.50g of Oxygen gas occupy under the same conditions?
Answer:
0.54 L
Explanation:
First we convert the given masses of O₂ into moles, using its molar mass:
23.1 g ÷ 32 g/mol = 0.722 mol2.50 g ÷ 32 g/mol = 0.078 molThen we can solve the problem using Avogadro's law, which states:
V₁n₂=V₂n₁Where:
V₁ = 5.0 Ln₂ = 0.078 molV₂ = ?n₁ = 0.722 molWe input the data:
5.0 L * 0.078 mol = V₂ * 0.722 molAnd solve for V₂:
V₂ = 0.54 LQuestion 6 of 10
How much energy is required to vaporize 2 kg of gold? Use the table below
and this equation: Q = mLvapor
Substance
Latent Heat
Fusion
(melting)
(kJ/kg)
Melting
Point
(°C)
Latent Heat
Vaporization
(boiling) (kJ/kg)
Boiling
Point
(°C)
Aluminum
400
660
1100
2450
Copper
207
1083
4730
2566
Gold
628
1063
1720
2808
Helium
52
-270
21
-269
Lead
24.5
327
871
1751
Mercury
11.4
-39
296
357
Water
335
0
2256
100
Answer: Q = mlvap
Q = (2 kg)(1 kmol/197 kg)(1,000 mol/1 kmol)
Q = 10.15 kJ
2126 joules of energy in form of thermal energy is required to vaporize 2 kg of gold.
What is thermal energy?Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.
Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.
These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.
Amount of heat is calculated as, Q=2×1063 =2126 joules as per the given formula.
Learn more about thermal energy,here:
https://brainly.com/question/18989562
#SPJ5
How many moles are there in 4.9x10^23 molecules of CO2?
F. 0.81 moles of CO2
G 8.14X10^45
H. 2.95X10^47
J. 2052.44
Answer:
0.81 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{4.9 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{4.9}{6.02} \\ = 0.813953...[/tex]
We have the final answer as
0.81 molesHope this helps you
which part of the human nervous system links the brain to the rest of the body
Digaments
spindi cord
heart
Answer: The Spinal Cord
Explanation: The spinal cord runs along the dorsal side of the body and links the brain to the rest of the body.
What kind of waste is shown in the photograph?
A. Composted waste
B. E-waste
C. Hazardous waste
O D. Septic system waste
A moving 10 kilogram object has 20 Joules of kinetic energy. What is its velocity?
4 m/s
2 m/s
10 m/s
200 m/s
Suppose that you have 70 grams of calcium chloride (CaCl2) contaminated with 5% sodium chloride (NaCl) and 2% sand. You dissolve the impure solid in 54 ml of hot water, and allow it to cool and crystallize. What would be the maximum mass (grams) of purified CaCl2 that would you would be able to recover
Answer:
65.1 grams
Explanation:
The percentage of impurities in the contaminated CaCl₂ sample is:
% of NaCl + % of sand = 7%Meaning that the purity of the sample is (100 - 7) 93%.
Now we calculate the mass of pure CaCl₂ in the contaminated sample:
70 g * 93/100 = 65.1 gThus the answer is 65.1 grams, as that amount is how much CaCl₂ is in the sample and it would be impossible to obtain more than that.