There is not sufficient evidence to conclude that infestation by spider mites induces resistance to wilt disease caused by the Verticillium fungus in cotton plants at the 1% level.
The question being investigated is whether infestation by spider mites can induce resistance to wilt disease caused by the fungus Verticillium in cotton plants. The experiment involved two groups of cotton plants - one group was infested with spider mites, while the other group served as controls. After two weeks, the mites were removed and both groups were inoculated with the Verticillium fungus. The number of plants that developed symptoms of wilt disease was recorded for each group.
To test whether infestation by spider mites can induce resistance to wilt disease, we can use a hypothesis test. The null hypothesis (H0) is that there is no difference in the proportion of plants that develop wilt disease between the mites and no mites groups, while the alternative hypothesis (Ha) is that the mites group has a lower proportion of plants with wilt disease compared to the no mites group.
We can use a chi-square test for independence to determine whether the data provide sufficient evidence to reject the null hypothesis at the 1% level. The test statistic is calculated as follows:
chi-square = (ad - bc)^2 / [(a+b)(c+d)]
where a = number of plants in the mites group with wilt disease, b = number of plants in the mites group without wilt disease, c = number of plants in the no mites group with wilt disease, and d = number of plants in the no mites group without wilt disease.
Using the data from the table, we can calculate the test statistic as follows:
chi-square = (14*28 - 18*26)^2 / [(14+18)(28+26)] = 1.079
The degrees of freedom for the chi-square test is (2-1)*(2-1) = 1. The critical value of chi-square at the 1% level with 1 degree of freedom is 6.635.
Since the calculated chi-square value (1.079) is less than the critical value (6.635), we fail to reject the null hypothesis.
Learn more about test statistics here: brainly.com/question/14128303
#SPJ11
The distribution of blood types for 100 Americans is listed in the table. If one donor is selected at random, Use the table below to answer part a and b O+ O- A+ A- B+ B- Blood Type AB B- AB+ Number 37 6 34 6 10 2 4 1 If one donor is selected at random a) Find the probability of selecting a person with blood type A+ or A- PA+ or A-) = 1 ( the answer has to be in a fraction form , #/# don't simplify the fraction) b) Find the probability of not selecting a person with blood type B+. P(not B+) = (the answer has to be in a fraction form , #/# don't simplify the fraction)
The probability of not selecting a person with blood type B+ is 90/100.
a) To find the probability of selecting a person with blood type A+ or A- (P(A+ or A-)), first count the number of people with each blood type, then divide the sum of those counts by the total number of people (100).
Number of people with blood type A+ = 34
Number of people with blood type A- = 6
P(A+ or A-) = (34 + 6) / 100 = 40/100
So, the probability of selecting a person with blood type A+ or A- is 40/100.
b) To find the probability of not selecting a person with blood type B+ (P(not B+)), first count the number of people without blood type B+ and then divide that count by the total number of people (100).
Number of people with blood type B+ = 10
Number of people without blood type B+ = 100 - 10 = 90
P(not B+) = 90 / 100 = 90/100
So, the probability of not selecting a person with blood type B+ is 90/100.
To know more about probability refer here:
https://brainly.com/question/30034780
#SPJ11
Pleaseeee helpppppppp
Answer:
See below
Step-by-step explanation:
Since the side length are proportional, the figures are similar. Helping in the name of Jesus.
Quickly
Sam has a pool deck that is shaped like a triangle with a base of 15 feet and a height of 9 feet. He plans to build a 4:5 scaled version of the deck next to his horse's water trough.
Part A: What are the dimensions of the new deck, in feet? Show every step of your work.
Part B: What is the area of the original deck and the new deck, in square feet? Show every step of your work.
Part C: Compare the ratio of the areas to the scale factor. Show every step of your work.
Part A:
The new deck will be a 4:5 scaled version of the original deck. This means that every dimension of the new deck will be 4/5 times the corresponding dimension of the original deck.
The original deck has a base of 15 feet and a height of 9 feet.
The new deck will have a base of (4/5) * 15 = 12 feet and a height of (4/5) * 9 = 7.2 feet.
Therefore, the dimensions of the new deck are 12 feet for the base and 7.2 feet for the height.
Part B:
To find the area of the original deck, we use the formula for the area of a triangle:
Area = (1/2) * base * height = (1/2) * 15 * 9 = 67.5 square feet.
To find the area of the new deck, we use the same formula with the new dimensions:
Area = (1/2) * 12 * 7.2 = 43.2 square feet.
Therefore, the area of the original deck is 67.5 square feet, and the area of the new deck is 43.2 square feet.
Part C:
The ratio of the areas is:
Area of new deck / Area of original deck = 43.2 / 67.5
Simplifying this fraction, we get:
Area of new deck / Area of original deck = 8 / 15
The scale factor is 4/5, which simplifies to 8/10 or 4/5.
Comparing the ratio of the areas to the scale factor, we see that:
Area ratio / Scale factor = (8/15) / (4/5) = (8/15) * (5/4) = 1
Therefore, the ratio of the areas is equal to the scale factor. This makes sense since the area of a triangle is proportional to the square of its dimensions. In this case, the scale factor is applied to both the base and the height, so the area ratio is equal to the scale factor squared, which is 16/25.
Answer:
Step-by-step explanation:
Part A: To find the dimensions of the new deck, we need to scale the base and height of the original deck by a factor of 4:5.
Scaling factor = 4/5
New base = 15 * (4/5) = 12 feet
New height = 9 * (4/5) = 7.2 feet
Therefore, the dimensions of the new deck are 12 feet for the base and 7.2 feet for the height.
Part B: The area of the original deck can be found by using the formula for the area of a triangle:
Area = (1/2) * base * height = (1/2) * 15 * 9 = 67.5 square feet.
The area of the new deck can also be found using the same formula:
Area = (1/2) * base * height = (1/2) * 12 * 7.2 = 43.2 square feet.
Part C: The ratio of the areas of the two decks can be found by dividing the area of the new deck by the area of the original deck:
Ratio of areas = (43.2 / 67.5) ≈ 0.64
The scale factor is 4:5 or 0.8.
Comparing the ratio of areas to the scale factor:
Ratio of areas / scale factor = (0.64 / 0.8) = 0.8
The ratio of the areas divided by the scale factor is equal to 0.8, which makes sense since the scale factor is the factor by which the dimensions were scaled up, and the ratio of areas tells us how much the area was scaled up.
Determine whether the sequence is increasing, decreasing, or not monotonic.
an = 1/5n+4 (A) increasing (B) decreasing (C) not monotonic Is the sequence bounded? (A) bounded (B) not bounded
Since the limit of the sequence is 0, we can say that the sequence is bounded between 0 and some positive number (since all terms in the sequence are positive). Therefore, the answer is (A) bounded.
To determine whether the sequence is increasing, decreasing, or not monotonic, we need to look at how the terms in the sequence change as n increases.
We can rewrite the sequence as:
an = 1/(5n + 4)
As n increases, the denominator 5n + 4 also increases, which means that the fraction 1/(5n + 4) decreases. Therefore, the terms in the sequence decrease as n increases.
So the answer is (B) decreasing.
To determine whether the sequence is bounded, we need to consider the limit of the sequence as n approaches infinity.
lim (n→∞) an = lim (n→∞) 1/(5n + 4) = 0
Know more about limit here:
https://brainly.com/question/8533149
#SPJ11
fill in the blank. (enter your answer in terms of s.) ℒ{e−4t sin 4t}
The Laplace transform of [tex]e^{(-4t)}sin(4t)[/tex] is 4/((s+4)² + 16).
In mathematics, the Laplace transform is an integral transform that converts a function of a real variable to a function of a complex variable s. The transform has many applications in science and engineering because it is a tool for solving differential equations.
To find the Laplace transform, denoted as ℒ{[tex]e^{(-4t)}sin(4t)[/tex]}, we'll use the following formula:
ℒ{[tex]e^{(-at)}f(t)[/tex]} = F(s+a)
where ℒ{f(t)} = F(s) is the Laplace transform of the function f(t), and "a" is the constant term in [tex]e^{(-at)}[/tex].
In this case, f(t) = sin(4t) and a = 4.
First, let's find the Laplace transform of f(t) = sin(4t), which is given by:
F(s) = ℒ{sin(4t)} = 4/(s² + 16)
Now, apply the formula for ℒ{[tex]e^{(-4t)}f(t)[/tex]}:
ℒ{[tex]e^{(-4t)}sin(4t)[/tex]} = F(s+4)
Substitute s+4 in the expression for F(s):
ℒ{[tex]e^{(-4t)}sin(4t)[/tex]} = 4/((s+4)² + 16)
Learn more about Laplace transform:
https://brainly.com/question/29583725
#SPJ11
A variable is approximately normally distributed. If you draw a histogram of the distribution of the variable, roughly what shape will it have? Choose the correct answer below.A. The histogram of the distribution of the variable would be roughly bell shaped.B. The histogram of the distribution of the variable would have one peak and a long tail to the left.C. The histogram of the distribution of the variable would have one peak and a long tail to the rightD. The histogram of the distribution of the variable would depend on the values of the data.E. There is insufficient information to determine the shape of the histogram of the distribution of the variable.
A. The histogram of the distribution of the variable would be roughly bell shaped.
If a variable is approximately normally distributed, its histogram will have a bell shape. This means that the majority of the data points will be clustered around the mean, with fewer and fewer data points as you move further away from the mean. The bell shape is symmetrical, which means that the left and right halves of the histogram will be mirror images of each other. The standard deviation of the data will determine how spread out the bell shape is.
The bell-shaped curve is commonly referred to as the normal distribution or Gaussian distribution. This distribution is widely used in statistics because many natural phenomena follow this pattern. For example, the heights of a population, the weights of a population, and the IQ scores of a population all tend to follow a normal distribution. This distribution is important because it allows us to make predictions and draw conclusions about a population based on a sample of data.
To know more about bell-shaped curve, visit : https://brainly.com/question/29003457
#SPJ11
A. The histogram of the distribution of the variable would be roughly bell shaped.
If a variable is approximately normally distributed, its histogram will have a bell shape. This means that the majority of the data points will be clustered around the mean, with fewer and fewer data points as you move further away from the mean. The bell shape is symmetrical, which means that the left and right halves of the histogram will be mirror images of each other. The standard deviation of the data will determine how spread out the bell shape is.
The bell-shaped curve is commonly referred to as the normal distribution or Gaussian distribution. This distribution is widely used in statistics because many natural phenomena follow this pattern. For example, the heights of a population, the weights of a population, and the IQ scores of a population all tend to follow a normal distribution. This distribution is important because it allows us to make predictions and draw conclusions about a population based on a sample of data.
To know more about bell-shaped curve, visit : https://brainly.com/question/29003457
#SPJ11
A bag has 7 blue and 4 green m&m's. If two m&m's are randomly selecte one after the other, what is the probability that they both are green? a. With Replacement.
The probability that they both are green is 13.22%. If the selection is done with replacement, then the probability of selecting a green M&M on the first draw is 4/11 (since there are 4 green out of 11 total M&Ms).
The probability of selecting another green M&M on the second draw is also 4/11, since the first M&M is replaced before the second selection is made, so the number of green and blue M&Ms remains the same. Therefore, the probability of selecting two green M&Ms with replacement is the product of the probabilities of selecting a green M&M on the first and second draws:
P(two green with replacement) = P(green on first draw) * P(green on second draw)
= (4/11) * (4/11)
= 16/121
≈ 0.1322
or about 13.22%.
For more such questions on Probability, visit:
brainly.com/question/30034780
#SPJ11
Its an 8th grade SBA review
hope you guys can help me
•DUE ON APRIL 11•
Answer:
The answers that you're looking for are:
5) C. No solution since 5 = 7 is a false statement.
6) A. The solution is x = 0
7) 55°
8) 143°
9)
A' = (-2, 0)
B' = (-5, 0)
C' = (-5, -4)
D' = (-3, -4)
E' = (-4, -3)
10) 70
Step-by-step explanation:
Will edit and add edit explanation later)
In 2010, Joe bought 200 shares in the Nikon Corp for $22.07 per share. In 2016 he sold the shares for $15.11 each.
a. What was Joe's capital loss?
b. Express Joe's capital loss as a percent, rounded to the nearest percent.
Joe's capital loss is $1,392.
Rounding to the nearest percent, we get that Joe's capital loss was 32%.
What is capital loss?Capital loss is the difference between the purchase price and the selling price of an asset when the selling price is lower than the purchase price. It represents the loss incurred by the investor or trader due to the decrease in the value of the asset. Capital loss can be realized or unrealized.
a. Joe's capital loss is the difference between the selling price and the purchase price of the shares.
Purchase price = 200 shares * $22.07 per share = $4,414
Selling price = 200 shares * $15.11 per share = $3,022
Capital loss = Purchase price - Selling price
Capital loss = $4,414 - $3,022
Capital loss = $1,392
Therefore, Joe's capital loss is $1,392.
b. To express Joe's capital loss as a percent, we need to divide the capital loss by the purchase price and then multiply by 100.
Capital loss percent = (Capital loss / Purchase price) * 100
Capital loss percent = ($1,392 / $4,414) * 100
Capital loss percent = 31.51%
Rounding to the nearest percent, we get that Joe's capital loss was 32%.
To know more about capital loss visit:;
https://brainly.com/question/25172909
#SPJ1
Julie says that the triangles are congruent because all the corresponding angles have the same measure.
Ramiro says that the triangles are similar because all the corresponding angles have the same measure.
Is either student correct? Explain your reasoning.
Hint: Find
congruence means, the figures are a duplicate or an exact twin of the other, that is angles as well as sides are the same, well, clearly ABC is larger, so they're not congruent.
That said, we could have a figure with same angles, and another with the same angles, but their side are not restricted due to the angle, the sides can easily extend or shrink, whilst the angles are being retained all along, and thus the figures being similiar, but never congruent.
Find the coordinates of the point P on the line segment joining A(1, 2) and B(6, 7) such that AP: BP = 2: 3.
The coordinates of P that partitions AB in the ratio 2 to 3 include the following: [3, 4].
How to determine the coordinates of point P?In this scenario, line ratio would be used to determine the coordinates of the point P on the directed line segment that partitions the segment into a ratio of 2 to 3.
In Mathematics and Geometry, line ratio can be used to determine the coordinates of P and this is modeled by this mathematical equation:
P(x, y) = [(mx₂ + nx₁)/(m + n)], [(my₂ + ny₁)/(m + n)]
By substituting the given parameters into the formula for line ratio, we have;
P(x, y) = [(mx₂ + nx₁)/(m + n)], [(my₂ + ny₁)/(m + n)]
P(x, y) = [(2(6) + 3(1))/(2 + 3)], [(2(7) + 3(2))/(2 + 3)]
P(x, y) = [(12 + 3)/(5)], [(14 + 6)/5]
P(x, y) = [15/5], [(20)/(5)]
P(x, y) = [3, 4]
Read more on line ratio here: brainly.com/question/14457392
#SPJ1
If P(A) = 0.55, P(A È B) = 0.72, andP(A Ç B) = 0.66, then P(B) =a.0.61b.0.49c.0.83d.1.93
The probability value for P(B) is obtained to be, Option (c) : 0.83.
What is probability?
Probability is a way to gauge how likely something is to happen. Many things are difficult to forecast with absolute confidence. Using it, we can only make predictions about the likelihood of an event happening, or how likely it is. Probability can range from 0 to 1, with 0 denoting an impossibility and 1 denoting a certainty.
We can use the formula: P(A È B) = P(A) + P(B) - P(A Ç B) to find P(B).
Rearranging the terms, we get -
P(B) = P(A È B) - P(A) + P(A Ç B)
Substituting the given values, we get -
P(B) = 0.72 - 0.55 + 0.66
P(B) = 0.83
The probability of an event A occurring is denoted by P(A) and is a number between 0 and 1, inclusive.
If A and B are two events, then P(A È B) denotes the probability that at least one of A or B occurs.
P(A Ç B) denotes the probability that both A and B occur simultaneously.
The formula used to find P(B) in terms of P(A), P(A È B), and P(A Ç B) is known as the addition rule of probability.
Therefore, the answer is 0.83.
To learn more about probability from the given link
https://brainly.com/question/23286309
#SPJ1
Square A has area x cm². Square B has area (x + 3) cm².
The area of square B is four times the area of square A.
a Write an equation using the information given.
b Solve the equation to find the value of x.
PLEASE HELP I HAVE AN EXAM TOMORROW!
(Willing to give 100 points
Step-by-step explanation:
Area B is 4 times Area A
This implies that B = 4 × A
So you take the measurements given and replace it, A is x and B is (x+3) so
(x+3) = 4x
3 = 4x - x
3x = 3
x = 1
consider the equation 4sin(x y) 4sin(x z) 6sin(y z)=0. find the values of ∂z ∂x and ∂z ∂y at the point (π,−2π,−4π).
The values of ∂z/∂x and ∂z/∂y at the point (π, -2π, -4π) are both 0.
To find the values of ∂z/∂x and ∂z/∂y at the point (π, -2π, -4π) for the equation 4sin(xy) + 4sin(xz) + 6sin(yz) = 0, first differentiate the equation with respect to x and y, then evaluate the derivatives at the given point.
Differentiate the equation with respect to x:
∂z/∂x = -[4cos(xy)*y + 4cos(xz)*z]/(4cos(xz)*y + 6cos(yz)*z)
Differentiate the equation with respect to y:
∂z/∂y = -[4cos(xy)*x + 6cos(yz)*z]/(4cos(xz)*x + 6cos(yz)*y)
Now, evaluate the derivatives at the point (π, -2π, -4π):
∂z/∂x = -[4cos(π*-2π)*-2π + 4cos(π*-4π)*-4π]/(4cos(π*-4π)*-2π + 6cos(-2π*-4π)*-4π) = 0
∂z/∂y = -[4cos(π*-2π)*π + 6cos(-2π*-4π)*-4π]/(4cos(π*-4π)*π + 6cos(-2π*-4π)*-2π) = 0
To know more about derivatives click on below link:
https://brainly.com/question/25324584#
#SPJ11
use logarithmic differentiation to find the derivative y\sqrt((1)/(t(8t 1)))
The derivative of y√(1/(t(8t+1))) is (dy/dt √(1/(t(8t+1))) - y * (4t√t+1 + √(8t+1))/(2t√(t(8t+1)))).
How to determined the derivative of y√(1/(t(8t+1))) by logarithmic differentiation?To use logarithmic differentiation to find the derivative of y√(1/(t(8t+1))), we can follow these steps:
Take the natural logarithm of both sides of the equation y√(1/(t(8t+1))):ln(y√(1/(t(8t+1)))) = ln(y) + 1/2 ln(1/(t(8t+1)))
Differentiate both sides of the equation with respect to t:d/dt ln(y√(1/(t(8t+1)))) = d/dt [ln(y) + 1/2 ln(1/(t(8t+1)))]
Simplify the right-hand side of the equation using the rules of logarithms:d/dt ln(y√(1/(t(8t+1)))) = d/dt [ln(y) - ln(t) - 1/2 ln(8t+1)]d/dt ln(y√(1/(t(8t+1)))) = d/dt [ln(y) - ln(t) - 1/2 ln(8t+1)¹/²]d/dt ln(y√(1/(t(8t+1)))) = d/dt ln(y/(t√(8t+1)))Apply the chain rule and simplify the expression on the right-hand side of the equation:d/dt ln(y√(1/(t(8t+1)))) = 1/(y/(t√(8t+1))) * (dy/dt √(1/(t(8t+1))) - y * (1/2 * 1/(t(8t+1))¹/² * 8 + 1/(2[tex](8t+1)^{0.5}[/tex])))d/dt ln(y√(1/(t(8t+1)))) = (dy/dt √(1/(t(8t+1))) - y * (4t/(2(8t+1))¹/² + 1/(2(8t+1))¹/²)) / (t√(8t+1) * y/t)Substitute the original expression for y:d/dt ln(y√(1/(t(8t+1)))) = (dy/dt √(1/(t(8t+1))) - y * (4t/(2(8t+1))¹/² + 1/(2(8t+1))¹/²)) / (t√(8t+1) * √(1/(t(8t+1))))d/dt ln(y√(1/(t(8t+1)))) = (dy/dt √(1/(t(8t+1))) - y * (4t√t+1 + √(8t+1))/(2t(8t+1))) / (√(t(8t+1)))Simplify the expression on the right-hand side of the equation as much as possible:d/dt ln(y√(1/(t(8t+1)))) = (dy/dt √(1/(t(8t+1))) - y * (4t√t+1 + √(8t+1))/(2t√(t(8t+1))))
So, the final expression y√(1/(t(8t+1))) is
(dy/dt √(1/(t(8t+1))) - y * (4t√t+1 + √(8t+1))/(2t√(t(8t+1)))).
Learn more about logarithmic differentiation
brainly.com/question/2166524
#SPJ11
A department store manager has monitored the number of complaints received per week about poor service. The probabilities for numbers of complaints in a week, established by this review, are shown in the table. Number of complaints 0 1 2 3 4 5 Probability 0.18 0.26 0.35 0.09 0.07 0.05 What is the median of complaints received per week? Please round your answer to the nearest integer. Note that the correct answer will be evaluated based on the full-precision result you would obtain using Excel.
The median of complaints received per week is 2.
To find the median of complaints received per week, we need to arrange the probabilities in ascending order and then find the probability at the middle position.
Arranging the probabilities in ascending order, we get:
Number of complaints 0 1 2 3 4 5
Probability 0.05 0.07 0.09 0.18 0.26 0.35
The median position is (n+1)/2, where n is the total number of probabilities. In this case, n=6, so the median position is (6+1)/2=3.5.
The probability at position 3 is 0.09 and the probability at position 4 is 0.18. Therefore, the median probability is the average of these two probabilities, which is (0.09+0.18)/2=0.135.
To find the median number of complaints, we need to find the number of complaints that corresponds to the median probability. Starting from the first probability, we add up the probabilities until we reach a total of at least 0.135.
0.05 + 0.07 + 0.09 = 0.21
Therefore, the median number of complaints is 2.
So, the answer is 2 (rounded to the nearest integer).
To learn more about probability visit : https://brainly.com/question/13604758
#SPJ11
The median of complaints received per week is 2.
To find the median of complaints received per week, we need to arrange the probabilities in ascending order and then find the probability at the middle position.
Arranging the probabilities in ascending order, we get:
Number of complaints 0 1 2 3 4 5
Probability 0.05 0.07 0.09 0.18 0.26 0.35
The median position is (n+1)/2, where n is the total number of probabilities. In this case, n=6, so the median position is (6+1)/2=3.5.
The probability at position 3 is 0.09 and the probability at position 4 is 0.18. Therefore, the median probability is the average of these two probabilities, which is (0.09+0.18)/2=0.135.
To find the median number of complaints, we need to find the number of complaints that corresponds to the median probability. Starting from the first probability, we add up the probabilities until we reach a total of at least 0.135.
0.05 + 0.07 + 0.09 = 0.21
Therefore, the median number of complaints is 2.
So, the answer is 2 (rounded to the nearest integer).
To learn more about probability visit : https://brainly.com/question/13604758
#SPJ11
find the tangential and normal components of the acceleration vector. r(t) = t i t2 j 5t k at = incorrect: your answer is incorrect. an =
Subtract the at vector from the acceleration vector a(t) and simplify the result.
To find the tangential and normal components of the acceleration vector for the given function [tex]r(t) = ti + t^2j + 5tk[/tex], we first need to find the velocity and acceleration vectors.
Velocity vector v(t) is the first derivative of r(t):
[tex]v(t) = dr/dt = (1)i + (2t)j + (5)k[/tex]
Acceleration vector a(t) is the second derivative of r(t) or the first derivative of v(t):
[tex]a(t) = dv/dt = (0)i + (2)j + (0)k[/tex]
Now, we need to find the tangential and normal components of the acceleration vector.
Tangential component (at) is the projection of the acceleration vector onto the velocity vector:
[tex]at = (a(t) • v(t)) / ||v(t)||^2 * v(t)[/tex]Dot product[tex]a(t) • v(t) = (0*1) + (2*2t) + (0*5) = 4t[/tex]Magnitude of v(t) squared = (1^2 + (2t)^2 + 5^2) = 1 + 4t^2 + 25
Thus, at =[tex](4t / (1 + 4t^2 + 25)) * (i + 2tj + 5k)[/tex]
Normal component (an) is given by:
an = a(t) - at
To find an, subtract the at vector from the acceleration vector a(t) and simplify the result.
To learn more about acceleration, refer below:
https://brainly.com/question/29175997
#SPJ11
HELP ME ASAP.
Triangle GHI, with vertices G(5,-8), H(8,-3), and I(2,-2), is drawn inside a rectangle. What is the area, in square units, of triangle GHI?
Answer:
area of triangle GHI =16.5 unit ^2
Step-by-step explanation:
triangle B =3 unit^2
triangle A = 9unit^2
triangle C = 7.5 unit^2
so
area of rectangle = 6 unit × 6 unit
= 36 unit^2
area of triangle GHI = 36 unit^2 - ( 3+9+7.5) unit^2
= 36unit^2 - 19.5unit^2
= 16.5 unit ^2
Find the area of each triangle. Round intermediate values to the nearest 10th. use the rounded value to calculate the next value. Round your final answer to the nearest 10th.
Answer:
11.2
Step-by-step explanation:
Jacob and Poppy bought petrol from different petrol
stations.
a) Was Jacob's petrol or Poppy's petrol better value for
money?
b) How much would 20 litres of petrol cost from the
cheaper petrol station?
Give your answer in pounds (£).
Jacob
£18.90 for 14 litres
of petrol
1
Poppy
£22.10 for 17 litres
of petrol
a) Poppy's petrol was better value for money as it cost less per liter. b) 20 liters of petrol from the cheaper petrol station (Poppy's petrol station) would cost £26.00.
How to determine if Jacob's petrol or Poppy's petrol better value for moneya) To determine which petrol was better value for money, we need to calculate the price per liter for each petrol station:
Jacob's petrol: £18.90 / 14 litres = £1.35 per litre
Poppy's petrol: £22.10 / 17 litres = £1.30 per litre
Therefore, Poppy's petrol was better value for money as it cost less per litre.
b) To calculate the cost of 20 litres of petrol from the cheaper petrol station, we need to determine which petrol station was cheaper:
Jacob's petrol: £1.35 per litre x 20 litres = £27.00
Poppy's petrol: £1.30 per litre x 20 litres = £26.00
Therefore, 20 litres of petrol from the cheaper petrol station (Poppy's petrol station) would cost £26.00.
Learn more about word problem at https://brainly.com/question/21405634
#SPJ1
what is 3 644 mod 645
The answer to 3 644 mod 645 is 3.
To solve this problem, we need to find the remainder when 3644 is divided by 645.
Learn more related to the topic:
brainly.com/question/31391032
#SPJ11
The answer to 3 644 mod 645 is 3.
To solve this problem, we need to find the remainder when 3644 is divided by 645.
Learn more related to the topic:
brainly.com/question/31391032
#SPJ11
In which year(s) is the number of employees in company A less than the number of employees in company B? Use the graph to find the answer.
Answer:
c
Step-by-step explanation:
tysm
Determine whether this statement is true or false: The outlier in the data shown increases the mean of the data.
Kira's backyard has a patio and a garden. Find the area of the garden. (Sides meet at right angles.)
Answer:
18 square yards
Step-by-step explanation:
You want the area of a garden that fills a back yard that is 4 yd by 6 yd except for a patio that is 3 yd by 2 yd.
Yard areaThe area of the backyard is ...
A = LW = (6 yd)(4 yd) = 24 yd²
Patio areaThe area of the patio is ...
A = LW = (3 yd)(2 yd) = 6 yd²
Garden area
The garden area is the area of the backyard that is not taken up by the patio:
24 yd² -6 yd² = 18 yd²
The garden covers 18 square yards.
__
Additional comment
You can compute this many ways. You can divide the garden area into rectangles or trapezoids, or you can recognize that the garden is 3/4 of the area of the back yard.
(You get two trapezoids by cutting the garden along a line between the upper left corner of the yard and the upper left corner of the patio.)
A line has a slope of – 1 and passes through the point ( – 19,17). Write its equation in slope-intercept form.
[tex](\stackrel{x_1}{-19}~,~\stackrel{y_1}{17})\hspace{10em} \stackrel{slope}{m} ~=~ - 1 \\\\\\ \begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{17}=\stackrel{m}{- 1}(x-\stackrel{x_1}{(-19)}) \implies y -17 = - 1 ( x +19) \\\\\\ y-17=-x-19\implies {\Large \begin{array}{llll} y=-x-2 \end{array}}[/tex]
Answer:
y = -x - 2
Step-by-step explanation:
Pre-SolvingWe are given that a line has a slope (m) of -1 and passes through (-19,17).
We want to write the equation of this line in slope-intercept form.
Slope-intercept form is given as y=mx+b, where m is the slope and b is the value of y at the y intercept, hence the name
SolvingAs we are already given the slope of the line, we can plug it into the equation.
Replace m with -1.
y = -1x + b
This can be rewritten to:
y = -x + b
Now, we need to find b.
As the equation passes through (-19,17), we can use its values to help solve for b.
Substitute -19 as x and 17 as y.
17 = -(-19) + b
17 = 19 + b
Subtract 19 from both sides.
-2 = b
Substitute -2 as b into the equation.
y = -x - 2
consider the function f(x) = 2 −e1−x. approximate f(1.01) using a linear approximation.
The linear approximation of f(1.01) is approximately 1.01.
To approximate f(1.01) using a linear approximation, we need to find the equation of the tangent line to the graph of f(x) at x = 1. We can do this by finding the slope of the tangent line and using the point-slope form of a linear equation.
First, we find the derivative of f(x):
f'(x) = e(1-x)
Then, we evaluate f'(1) to find the slope of the tangent line at x = 1:
f'(1) = e(1-1) = e0 = 1
So the slope of the tangent line is 1.
Next, we find the value of f(1):
f(1) = 2 - e(1-1) = 2 - e0 = 2 - 1 = 1
So the point on the graph of f(x) that corresponds to x = 1 is (1, 1).
Using the point-slope form of a linear equation, we can write the equation of the tangent line as:
y - 1 = 1(x - 1)
Simplifying, we get:
y = x
Now, we can use this equation to approximate f(1.01):
f(1.01) ≈ 1.01
Know more about tangent line here:
https://brainly.com/question/31326507
#SPJ11
Let P be the transition probability matrix of a Markov chain. Argue that if for some positive integer r, P^r has all positive entries, then so does P^n, for all integers n greaterthanorequalto r.
If [tex]P^r[/tex] has all positive entries for some positive integer r, then [tex]P^n[/tex] will also have all positive entries for all integers n greater than or equal to r, due to the irreducibility of the Markov chain and the properties of matrix multiplication.
Given a transition probability matrix P of a Markov chain, if [tex]P^r[/tex] has all positive entries for some positive integer r, then [tex]P^n[/tex] also has all positive entries for all integers n greater than or equal to r.
Here's the explanation:
Let P be the transition probability matrix of a Markov chain, and let [tex]P^r[/tex] have all positive entries for some positive integer r. We want to show that [tex]P^n[/tex] has all positive entries for all integers n greater than or equal to r.
1. Since [tex]P^r[/tex] has all positive entries, the Markov chain is irreducible (meaning that there is a non-zero probability of transitioning between any two states in a finite number of steps).
2. Because the Markov chain is irreducible, there exists a positive integer k such that [tex]P^k[/tex] has all positive entries for all k greater than or equal to r.
3. Let n be an integer greater than or equal to r. We can express n as a multiple of k and some non-negative integer m, i.e., n = mk.
4. Then, [tex]P^n[/tex] = [tex]P^{mk[/tex] = [tex](P^k)^m[/tex]. Since [tex]P^k[/tex] has all positive entries, [tex](P^k)^m[/tex] also has all positive entries as the product of positive entries is always positive.
5. Therefore, [tex]P^n[/tex] has all positive entries for all integers n greater than or equal to r.
To know more about "Markov chain" refer here:
https://brainly.com/question/30408967#
#SPJ11
If [tex]P^r[/tex] has all positive entries for some positive integer r, then [tex]P^n[/tex] will also have all positive entries for all integers n greater than or equal to r, due to the irreducibility of the Markov chain and the properties of matrix multiplication.
Given a transition probability matrix P of a Markov chain, if [tex]P^r[/tex] has all positive entries for some positive integer r, then [tex]P^n[/tex] also has all positive entries for all integers n greater than or equal to r.
Here's the explanation:
Let P be the transition probability matrix of a Markov chain, and let [tex]P^r[/tex] have all positive entries for some positive integer r. We want to show that [tex]P^n[/tex] has all positive entries for all integers n greater than or equal to r.
1. Since [tex]P^r[/tex] has all positive entries, the Markov chain is irreducible (meaning that there is a non-zero probability of transitioning between any two states in a finite number of steps).
2. Because the Markov chain is irreducible, there exists a positive integer k such that [tex]P^k[/tex] has all positive entries for all k greater than or equal to r.
3. Let n be an integer greater than or equal to r. We can express n as a multiple of k and some non-negative integer m, i.e., n = mk.
4. Then, [tex]P^n[/tex] = [tex]P^{mk[/tex] = [tex](P^k)^m[/tex]. Since [tex]P^k[/tex] has all positive entries, [tex](P^k)^m[/tex] also has all positive entries as the product of positive entries is always positive.
5. Therefore, [tex]P^n[/tex] has all positive entries for all integers n greater than or equal to r.
To know more about "Markov chain" refer here:
https://brainly.com/question/30408967#
#SPJ11
The box plot represents the number of tickets sold for a school dance.
Tickets Sold for A Dance
Numbers 7-32 are shown on the box plot. The line on the left sides length is on the number 8, while it ends on the right side on number 31. A full rectangle is shown, distributed into two parts. One part of the rectangle is 15 to 19. The other part is smaller, 19 to 21. The bottom of the box plot labeled number of tickets shown.
Which of the following is the appropriate measure of center for the data, and what is its value?
The mean is the best measure of center, and it equals 19.
The median is the best measure of center, and it equals 19.
The mean is the best measure of center, and it equals 6.
The median is the best measure of center, and it equals 6.
The appropriate measure of center for the data is The median is the best measure of center, and it equals 19.
What are mean and median?
In statistics, both the mean and the median are measures of central tendency, which describe where the center of a distribution of data is located.
The mean, also called the arithmetic mean, is calculated by adding up all the values in a dataset and dividing by the total number of values. It is often used when the data is normally distributed and does not have extreme outliers that could significantly affect the value. The mean is sensitive to extreme values because they can have a large impact on the overall average.
The median is the middle value in a dataset when the values are ordered from smallest to largest. If there is an even number of values, the median is the average of the two middle values. The median is often used when the data has outliers or is skewed, as it is not affected by extreme values in the same way as the mean.
Both measures have their advantages and disadvantages, and the choice between using mean or median as a measure of central tendency depends on the nature of the data and the research question being addressed.
Based on the given information, the box plot shows the distribution of the number of tickets sold for a school dance. The box represents the middle 50% of the data, with the bottom of the box indicating the 25th percentile and the top of the box indicating the 75th percentile. The line inside the box represents the median, which is the middle value when the data is arranged in order. The "whiskers" extending from the box indicate the range of the data outside of the middle 50%.
In this case, the box plot shows that the middle 50% of the data falls within the range of approximately 15 to 21 tickets sold. The median value, indicated by the line inside the box, falls within this range, and based on the given information, it is not possible to determine whether the mean value would be higher or lower than the median. Therefore, the appropriate measure of center for the data is the median, and its value is 19.
So, the appropriate measure of center for the data is The median is the best measure of center, and it equals 19.
Learn more about mean and median here,
https://brainly.com/question/14532771
#SPJ1
Find the exact location of all the relative and absolute extrema of the function. (Order your answers from smallest to largest x.)
h(x) = 5(x − 1)2⁄3 with domain [0, 2]
h has ---Select--- a relative minimum a relative maximum an absolute minimum an absolute maximum no extremum at (x, y) =
.h has ---Select--- a relative minimum a relative maximum an absolute minimum an absolute maximum no extremum at (x, y) =
.h has ---Select--- a relative minimum a relative maximum an absolute minimum an absolute maximum no extremum at (x, y) =
The final location of all relative and absolute extrema of the function H(x) is, H has an absolute minimum at (0, 5) and an absolute maximum at (2, 5). no relative extrema.
To find the exact location of all the relative and absolute extrema of the function h(x) = 5(x-1)^(2/3) with domain [0, 2], follow these steps:
1. Find the first derivative of h(x) with respect to x:
h'(x) = d/dx [5(x-1)^(2/3)]
h'(x) = (2/3) * 5(x-1)^(-1/3)
2. Set the first derivative to 0 to find critical points:
(2/3) * 5(x-1)^(-1/3) = 0
No real solutions exist for x.
3. Check the endpoints of the domain for absolute extrema:
h(0) = 5(0-1)^(2/3) = 5(-1)^(2/3) = 5
h(2) = 5(2-1)^(2/3) = 5(1)^(2/3) = 5
4. Compare the function values at the endpoints:
Since h(0) = h(2) = 5, and there are no critical points within the domain, h(x) has an absolute minimum at (0,5) and an absolute maximum at (2,5). There are no relative extrema in this case.
Your answer:
h has an absolute minimum at (0, 5).
h has an absolute maximum at (2, 5).
h has no relative extrema.
learn more on absolute extrema: https://brainly.com/question/31489266
#SPJ11
assume that the mean height for men in the u.s. is 5’8"" with a standard deviation of 6"". how tall would a man have to be to have a z score of 2?
To answer this question, we can use the formula: z = (x - mean) / standard deviation
We know that the mean height for men in the U.S. is 5'8" with a standard deviation of 6". We also know that we want to find the height (x) that corresponds to a z score of 2.
Rearranging the formula, we get:
x = z * standard deviation + mean
Plugging in the values, we get:
x = 2 * 6 + 5'8"
Simplifying, we get:
x = 12" + 5'8"
Converting to feet and inches, we get:
x = 6'8"
Therefore, a man would have to be 6'8" tall to have a z score of 2, assuming a mean height for men in the U.S. of 5'8" with a standard deviation of 6".
To learn more about “mean” refer to the https://brainly.com/question/1136789
#SPJ11