calculate the hydronium ion, h3o , and hydroxide ion, oh− , concentrations for a 0.0338 m naoh solution.

The beta decay product of Mo-98 (Molybdenum-98, atomic number 42) is Tc-98 (Technetium-98).

Here's a step-by-step explanation:

1. Mo-98 undergoes beta decay, where a neutron is converted into a proton and an electron (beta particle) is emitted.
2. As a result, the atomic number increases by 1 (from 42 to 43) and the element changes from Mo (Molybdenum) to Tc (Technetium).
3. The mass number remains the same (98), so the final product is Tc-98 (Technetium-98).

So, the correct choice among the given options is Tc-98.

To learn more about beta decay, visit:

https://brainly.com/question/31394531

#SPJ11

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

Solubility is the ability of a substance to dissolve in a solvent, usually a liquid, to form a homogeneous solution. It is expressed as the maximum amount of solute that can dissolve in a given quantity of solvent or solution. It can also be expressed in terms of concentration, as the amount of solute that dissolves in a given volume of solvent or solution at a given temperature. A substance is considered soluble if it dissolves in a solvent at a rate sufficient to reach equilibrium.

Given: Solubility of KHT in mol L⁻¹ = 0.00025 mol/L

Conversion: 0.00025 mol/L x 204.22 g/mol = 0.0505 g KHT/100 mL

The literature value for KHT solubility is 0.042 g/100 mL. The value obtained from the experiment is slightly higher than the literature value.

To learn more about solubility

https://brainly.com/question/23946616

#SPJ1

Answer:

chemical hazard

Explanation:

Based on the given H NMR chemical shift data, we can match the compounds as follows:
Compound A (δ 3.2 and δ 12.4) corresponds to malonic acid (HO2CCH2CO2H), as the two singlets result from the two chemically equivalent methylene (CH2) protons and the two carboxylic acid (CO2H) protons.

Compound B (δ 6.3 and δ 12.4) corresponds to maleic acid (cis-HO2CCH=CHCO2H). The signal at δ 6.3 is due to the two equivalent vinylic protons (CH=CH), while the signal at δ 12.4 results from the two carboxylic acid (CO2H) protons.

Compound C (δ 8.0 and δ 11.4) corresponds to formic acid (HCO2H). The signal at δ 8.0 arises from the single aldehyde proton (CH), and the signal at δ 11.4 is attributed to the carboxylic acid (CO2H) proton.

To know more about chemical shift click here:

https://brainly.com/question/30579222

#SPJ11

This reaction's equilibrium constant is 0.300.

To solve for the equilibrium constant (Kc), we need to use the concentrations of the reactants and products at equilibrium. We are given the equilibrium concentration of B(g) which is 0.035 M. However, we need to find the equilibrium concentrations of A(g) and C(g).

From the balanced chemical equation, we know that for every 2 moles of A that react, 1 mole of B and 3 moles of C are produced. Let x be the equilibrium concentration of A. Then, using stoichiometry, the equilibrium concentrations of B and C are:

[B] = 0.035 M
[C] = 3x

Since the reaction stoichiometry is 2:1:3 (A:B:C), the equilibrium concentrations in terms of x are:

[A] = 0.115 - 2x
[B] = 0.035
[C] = 3x

Now we can write the expression for the equilibrium constant (Kc):

Kc = ([B]^1[C]^3) / [A]^2

Plugging in the equilibrium concentrations, we get:

Kc = (0.035)(3x)^3 / (0.115 - 2x)^2

Simplifying this expression, we get:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

At equilibrium, the reaction quotient Qc is equal to Kc. Therefore, we can set up an equation to solve for x:

Kc = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Kc = 3.3 (given)

3.3 = (0.0315x^3) / (0.013225 - 0.460x + 4x^2)

Solving this equation for x gives us x = 0.020 M. Therefore, the equilibrium concentrations are:

[A] = 0.115 - 2x = 0.075 M
[B] = 0.035 M
[C] = 3x = 0.060 M

Plugging in these values into the expression for Kc gives us:

Kc = (0.035)(0.060)^3 / (0.075)^2

Kc = 0.300

Therefore, the equilibrium constant for this reaction is 0.300.

For more such questions on equilibrium constant , click on:

https://brainly.com/question/3159758

#SPJ11

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

To determine how many mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4, we first need to find the mmol of H2C2O4:

moles of H2C2O4 = (1.9 mol/L) * (50 mL * (1 L / 1000 mL)) = 0.095 mol H2C2O4

Since the balanced equation for the reaction between NaOH and H2C2O4 is:

H2C2O4 + 2 NaOH → Na2C2O4 + 2 H2O

From the balanced equation, 2 moles of NaOH react with 1 mole of H2C2O4. Therefore, we can find the mmol of NaOH:

mmol of NaOH = 0.095 mol H2C2O4 * (2 mol NaOH / 1 mol H2C2O4) = 0.19 mol NaOH

Thus, 0.19 mol or 190 mmol of NaOH will react completely with 50 mL of 1.9 M H2C2O4.

Know more about Balanced Chemical Equation here:

https://brainly.com/question/28383671

#SPJ11

As a business, Starbucks must manage several critical risks to ensure its success. One critical risk is the potential for increased competition from other coffee shops and cafes, which could impact its market share and profitability. Additionally, Starbucks must manage the supply chain and operational risks, such as disruptions in the coffee bean supply or issues with its payment systems.

To maintain its success, Starbucks must also manage several key success factors. One important factor is its ability to maintain and grow its customer base, through marketing campaigns and delivering a high-quality customer experience. Additionally, Starbucks must continually innovate and introduce new products and services to stay relevant and meet evolving customer needs. Effective management of these critical risks and success factors is essential for Starbucks to maintain its position as a leader in the coffee industry.

Learn more about Starbucks at  brainly.com/question/11540013

#SPJ11

Answer:

[tex]The \: systemic \: name \: of \: the \: \\ compound \: is[/tex]

Mercuric nitrate

hope it helps <3

Approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

The balanced chemical equation for the reaction between calcium carbonate (CaCO₃) and hydrochloric acid (HCl) is:

CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O

From the equation, we can see that 1 mole of CaCO₃ reacts with 2 moles of HCl to produce 1 mole of CO₂. The molar mass of CaCO₃ is 100.09 g/mol, and the molar mass of HCl is 36.46 g/mol.

To find the mass of CO₂ produced, we need to determine which reactant is limiting. This can be done by calculating the number of moles of each reactant and comparing them to the stoichiometric ratio in the balanced equation.

Number of moles of CaCO₃ = 20 g / 100.09 g/mol = 0.1998 mol

Number of moles of HCl = 25 g / 36.46 g/mol = 0.685 mol

According to the balanced equation, 1 mole of CaCO₃ reacts with 2 moles of HCl. Therefore, the limiting reactant is CaCO₃, since only 0.1998 moles of CaCO₃ are available to react with HCl.

From the balanced equation, we know that 1 mole of CaCO₃ produces 1 mole of CO₂. Therefore, the number of moles of CO₂ produced is also 0.1998 mol.

The molar mass of CO₂ is 44.01 g/mol. Therefore, the mass of CO₂ produced is:

Mass of CO= 0.1998 mol x 44.01 g/mol = 8.79 g

Therefore, approximately 8.79 grams of CO₂ are produced when 20 grams of CaCO₃ and 25 grams of HCl are mixed.

Learn more about molar mass,

https://brainly.com/question/22997914

#SPJ4

The more-reduced molecules in each pair are: a) ethanol, b) lactate, c) succinate, d) isocitrate, e) malate, and f) 2-phosphoglycerate.


a) Ethanol is more reduced than acetaldehyde because it has more hydrogen atoms and fewer oxygen atoms in its structure.

b) Lactate is more reduced than pyruvate because it has one more hydrogen atom and one less double-bonded oxygen atom.

c) Succinate is more reduced than fumarate due to the presence of two additional hydrogen atoms in its structure.

d) Isocitrate is more reduced than oxalosuccinate because it has one more hydrogen atom and one less double-bonded oxygen atom.

e) Malate is more reduced than oxaloacetate because it has two additional hydrogen atoms.

f) 2-phosphoglycerate is more reduced than pyruvate because it has three more hydrogen atoms and one less double-bonded oxygen atom.

To know more about phosphoglycerate click on below link:

https://brainly.com/question/28610998#

#SPJ11

To upload a single file of all the skeletal structures for the molecules in the table, you can use a program like ChemDraw or MarvinSketch to draw the structures and save them as individual files. Then, you can combine them into a single PDF or image file using a tool like Adobe Acrobat or Microsoft Paint. Just make sure that each structure is clearly labeled with the name of the molecule to avoid any confusion.

Let us discuss this in detail.

To upload a single file of all the skeletal structures for the molecules in the table, follow these steps:

1. Gather the skeletal structures: Collect images or create diagrams of the skeletal structures for each molecule listed in the table. Make sure they are accurate and clear.

2. Label the structures: For each skeletal structure, add a label that clearly indicates the name of the molecule. You can do this using image editing software or by creating the labels directly on the diagrams if you are drawing them.

3. Combine the structures into a single file: Arrange all the labeled skeletal structures in a document or image file, ensuring that each structure is easily distinguishable and well-organized. You can use software like Microsoft Word, PowerPoint, or an image editor like GIMP or Photoshop for this purpose.

4. Save the file: Save your document or image file with an appropriate name that reflects its contents, such as "Skeletal_Structures_of_Molecules."

5. Upload the file: Finally, upload the single file containing all the labeled skeletal structures for the molecules in the table to the designated platform or as per the given instructions.

By following these steps, you will have successfully created and uploaded a single file of all the skeletal structures for the molecules in the table.

Learn more about skeletal structures at https://brainly.com/question/29165067

#SPJ11

The wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s is approximately 5.39 × [tex]10^{-11[/tex] meters.

To calculate the wavelength of an electron traveling at 1.35 × [tex]10^7[/tex] m/s, you can use the de Broglie equation, which relates the wavelength (λ) to the momentum (p) of a particle:
λ = h / p
where h is Planck's constant (6.626 × [tex]10^{-34[/tex] Js) and
p is the momentum of the electron.

The momentum can be calculated using the equation:
p = m × v
where m is the mass of the electron (9.11 × [tex]10^{-31[/tex] kg) and
v is its velocity (1.35 × [tex]10^7[/tex] m/s).

Step 1: Calculate the momentum:
p = (9.11 × [tex]10^{-31[/tex]kg) × (1.35 × [tex]10^7[/tex] m/s)
p ≈ 1.229 × [tex]10^{-23[/tex] kg m/s

Step 2: Use the de Broglie equation to find the wavelength:
λ = (6.626 × [tex]10^{-34[/tex] Js) / (1.229 × [tex]10^{-23[/tex] kg m/s)
λ ≈ 5.39 × [tex]10^{-11[/tex] m

To know more about "de Broglie equation" refer here:

https://brainly.com/question/30404168#

#SPJ11

The pH of a 0.100 M NH₃ solution with Kb = 1.8 x 10⁻⁵ is 11.13. (A)


1. Write the Kb expression: Kb = [NH₄⁺][OH⁻] / [NH₃]

2. Set up an ICE table: Initial concentrations are [NH₃] = 0.100 M, [NH₄⁺] = 0, [OH⁻] = 0. Changes are -x for NH₃ and +x for NH₄⁺ and OH⁻.

3. Substitute values into the Kb expression: (1.8 x 10⁻⁵) = (x)(x) / (0.100 - x)

4. Since x is small compared to 0.100, we can approximate by removing x in the denominator.

5. Solve for x: x² = (1.8 x 10⁻⁵)(0.100) ⟹ x = 1.34 x 10⁻³ M

6. Calculate the pOH: pOH = -log(1.34 x 10⁻³) ≈ 2.87

7. Find the pH: pH = 14 - pOH ≈ 11.13(A)

To know more about ICE table click on below link:

https://brainly.com/question/30642088#

#SPJ11

On a gas chromatogram, the time from sample injection to the time of maximum peak intensity is referred to as the "retention time" for that peak.

Gas chromatography is used to separate compounds of a mixture by injecting a gaseous/liquid sample into a mobile phase known as the carrier gas, which is usually and inert or unreactive gas and passing the gas through a stationary phase.

If we have a sample with many compounds, each compound in the sample will spend different time on the column based on its chemical composition which means that, each will have a different retention time.

For more questions on gas chromatography: https://brainly.com/question/30500847

#SPJ11

Testing for ammonium ion in a separate sample is necessary to avoid interference from other ions present in Group C during evaporation.

The reason why it is necessary to test for the ammonium ion in a separate sample of solution is that it can interfere with the analysis of other cations in Group C.

During the analysis of Group C cations, the solution is usually evaporated to dryness to remove any excess ammonium chloride, which is added to the solution to ensure the complete precipitation of Group C cations. However, if ammonium ion is present in the solution, it can form volatile ammonia gas upon evaporation and interfere with the analysis of other cations by masking their precipitates or changing their color.

By testing for the ammonium ion in a separate sample of solution, it can be determined whether or not it is present before the evaporation step. If it is present, it can be removed or masked before proceeding with the analysis of Group C cations.

Therefore, it is important to test for the ammonium ion separately to ensure accurate and reliable results in the analysis of Group C cations.

Learn more about ammonium ion

brainly.com/question/29781007

#SPJ11

Each one of the following includes 0.150mol of solute in a 0.0025M HCI volume.

The space that an item takes up. It is normally assessed in cubic units and estimated and use a variation of formulas. A hexagonal bathtub that also is 1 foot tall, two feet wide, & 4 feet long, for example, has a quantity of 8 cubic meters.

Volumetric flasks, burettes, or pipettes designed for measuring amounts of liquid tend to be the most accurate, of tolerances of less than 0.02. Precision measurements are required in research and testing, and many testing vessels are already designed to login for liquid residue which clings in a flask.

To know more about volume visit :

https://brainly.com/question/24189159

#SPJ1

6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To determine how many moles of H₂O should form in the reaction 4NH₃(g) + 5O₂(g) --> 4NO(g) + 6H₂O(g) when 4.5 moles of NH₃ react with sufficient oxygen, follow these steps:

1. Identify the mole ratio of NH₃ to H₂O in the balanced chemical equation. The mole ratio is 4:6 or 2:3.
2. Apply the mole ratio to the given moles of NH₃. In this case, you have 4.5 moles of NH₃. To find the moles of H₂O formed, multiply the moles of NH₃ by the mole ratio of H₂O to NH₃ (3/2):

4.5 moles NH₃×  (3 moles H₂O / 2 moles NH₃) = 6.75 moles H2O

The correct answer is  D) 6.8 moles of H₂O should form when 4.5 moles of ammonia react with sufficient oxygen.

To learn more about moles https://brainly.com/question/15356425

#SPJ11

the values we have, we get:percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

How to solve the problem?

The first step in determining the percent yield is to calculate the theoretical yield, which is the maximum amount of product that could be produced based on the amount of reactant used in the reaction. To calculate the theoretical yield, we need to use the balanced chemical equation and the molar mass of the reactant and product.

The balanced chemical equation for the reaction is:

Fe₂O₃ + 3H₂→ 2Fe + 3H₂O

From the equation, we can see that 3 moles of hydrogen gas react with 1 mole of iron oxide to produce 2 moles of iron and 3 moles of water. The molar mass of H₂ is 2.016 g/mol, and the molar mass of Fe is 55.845 g/mol.

Using this information, we can calculate the theoretical yield of iron as follows:

3.561 g H₂ × (1 mol H₂/2.016 g) × (2 mol Fe/3 mol H2) × (55.845 g Fe/mol Fe) = 31.45 g Fe

This means that if the reaction went to completion, we would expect to obtain 31.45 grams of iron.

The actual yield obtained in the lab was 32.12 grams of iron. The percent yield can be calculated using the following formula:

percent yield = (actual yield/theoretical yield) × 100%

Substituting the values we have, we get:

percent yield = (32.12 g Fe/31.45 g Fe) × 100% = 102.1%

The percent yield is greater than 100%, which suggests that there may have been some errors or losses during the experiment. This could be due to a number of factors, such as incomplete reaction, loss of product during handling, or measurement errors. It is important to identify and address these sources of error in order to improve the accuracy of the experiment and obtain more reliable results in future trials.

To know more about yield visit :-

https://brainly.com/question/28033398

#SPJ1

Table 7.3: Calculated and observed pH of aqueous salts as attached below.

Acetate is a salt or an ester of acetic acid. It can refer to the acetate ion, which is the conjugate base of acetic acid, or to acetate compounds such as sodium acetate or ethyl acetate. The acetate ion has the chemical formula C2H3O2- and is negatively charged.

To measure the pH of each solution, use a pH meter or pH indicator strips according to the manufacturer's instructions. Dip the pH electrode or strip into the solution, wait for the reading to stabilize, and record the observed pH in the table.

Find out more on acetate here: https://brainly.com/question/30224584

#SPJ1

1. The equilibrium expression for the compound is:

[Cd²⁺] [CO₃²⁻] / [CdCO₃]

2. The solubility of product, Ksp for the compound is  1.0×10⁻¹²

Equilibrium constant, Keq for a given chemical reaction is written as shown below:

nReactant ⇌ mProduct

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Now, we can shall determine the equilibrium expression, Keq for the reaction. Details below:

CdCO₃(aq) ⇌ Cd²⁺(aq) +  CO₃²⁻(aq)

Equilibrium constant (Keq) = [Product]ᵐ / [Reactant]ⁿ

Equilibrium constant expression = [Cd²⁺] [CO₃²⁻]/ [CdCO₃]

The solubility of product, Ksp for the compound ca be obtained as follow:

Ksp = [Cd²⁺] × [CO₃²⁻]

Ksp = 1.0×10⁻⁶ × 1.0×10⁻⁶

Ksp = 1.0×10⁻¹²

Learn more about equilibrium constant:

https://brainly.com/question/16589765

#SPJ1

Answer:

ZnS

Explanation:

Zinc sulfide is not soluble in water while Calcium sulfide is, therefore the former will precipitate but the latter won't

The given statement, A substance that causes the oxidation of another substance is called an oxidizing agent is True because the oxidizing agent is a substance that causes the oxidation of another substance.

Oxidation is a chemical reaction in which electrons are transferred from one molecule to another, resulting in the formation of new molecules. Oxidizing agents can be various compounds such as oxygen, halogens, and certain metal ions.

Oxygen is the most common oxidizing agent and is used in many oxidation reactions. Halogens, such as chlorine, bromine and iodine, are also used as oxidizing agents in certain reactions.

Metal ions, such as iron, copper and manganese, may also act as oxidizing agents in reactions. Oxidizing agents are essential in biological processes such as respiration and metabolism, as well as industrial processes such as electricity generation and chemical manufacturing.

Know more about oxidizing agent here

https://brainly.com/question/10547418#

#SPJ11

The major organic product formed from the reaction of 1-bromopropane with KOCH(CH3)3 is 1-propoxypropane.

The reaction involves a substitution reaction where the bromine atom of 1-bromopropane is replaced by the alkoxide group (OC(CH3)3) from potassium tert-butoxide (KOCH(CH3)3). The tert-butoxide ion is a strong nucleophile, attacking the electrophilic carbon of 1-bromopropane to form a new carbon-oxygen bond.

This results in the formation of 1-propoxypropane as the major product, where the tert-butoxide group replaces the bromine atom. The reaction occurs via an S_N2 mechanism, where the nucleophile attacks the substrate from the backside, resulting in inversion of configuration at the reaction center.

For more questions like Reaction click the link below:

https://brainly.com/question/28984750

#SPJ11

The degree of dissociation of the lactic acid solution is approximately 0.0000857.

Given that the pKa of lactic acid is 3.08, the approximate degree of dissociation of a .35 M solution of lactic acid can be calculated. The degree of dissociation of an acid is calculated by using the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]).

In this equation, [A-] is the concentration of the conjugate base and [HA] is the concentration of the acid. To calculate the degree of dissociation, the concentration of the conjugate base needs to be known. By rearranging the equation to [A-] = [HA]*10^(pH-pKa) and substituting the given values for the pH and pKa, the concentration of the conjugate base can be calculated.

The concentration of the conjugate base is .35*10^(-3.08) = .0003 M. The degree of dissociation is then calculated as the ratio of the conjugate base concentration to the original acid concentration, which is .0003/.35 = .0000857.

know more about lactic acid here

https://brainly.com/question/10948414#

#SPJ11

The substitution product of 3-bromo-3-methylpentane and methanol will be 3-methyl-3-pentanol, and The substitution product of 3-chloro-3-methylhexane and methanol will be 3-methyl-3-hexanol.

3-bromo-3-methylpentane and methanol undergo SN1 reaction as follows; Step 1; Ionization of the substrate

3-bromo-3-methylpentane → 3-methyl-3-pentyl cation + Br⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-pentyl cation + CH₃OH → 3-methyl-3-pentanol + H⁺

Therefore, the substitution product is 3-methyl-3-pentanol.

3-chloro-3-methylhexane and methanol undergo SN₁ reaction as follows; Step 1; Ionization of the substrate

3-chloro-3-methylhexane → 3-methyl-3-hexyl cation + Cl⁻

Step 2; Nucleophilic attack by methanol and deprotonation

3-methyl-3-hexyl cation + CH₃OH → 3-methyl-3-hexanol + H⁺

Therefore, the substitution product is 3-methyl-3-hexanol.

To know more about substitution product here

https://brainly.com/question/14052597

#SPJ4

Since we are ignoring gravitational effects, we can assume that the sucrose solution and the water on top of it will mix through diffusion.

a)After 24 s, some diffusion will have occurred, but the concentration profile will not have fully mixed yet. We can use Fick's second law to find the concentration at 5.0 cm above the lower layer: ∂C/∂t = D(∂^2C/∂x^2).

where C is the concentration, t is time, x is distance, and D is the diffusion coefficient. Since we are only interested in the concentration at 5.0 cm above the lower layer, we can set x = 0.05 m. The diffusion coefficient for sucrose in water at room temperature is about 5.2 x 10^-10 m^2/s.

Using the initial conditions of 10 g of sugar in 5.0 cm^3 of water, we can calculate the initial concentration: C(0,0.05) = 10 g / (5.0 cm^3) = 2 g/cm^3, Now we can solve Fick's second law for C(24,0.05): C(24,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))].

erfc is the complementary error function, which can be found in tables or using a calculator. Plugging in the values, we get: C(24,0.05) = 1.10 g/cm^3
To convert to molarity, we need to divide by the molecular weight of sucrose (342.3 g/mol) and multiply by 1000 to convert from g/cm^3 to g/L: C(24,0.05) = 1.10 g/cm^3 / 342.3 g/mol * 1000 g/L = 3.21 x 10^-3 M.

b. After 2.4 years, diffusion will have had ample time to fully mix the solution. We can use the same initial conditions and diffusion coefficient as before, but now we need to solve Fick's second law for a much longer time: C(t,0.05) = C(0,0.05) erfc[(0.05)/(2 sqrt(D t))]
Plugging in the values, we get: C(2.4 years,0.05) = 0.5 g/cm^3
Converting to molarity as before, we get: C(2.4 years,0.05) = 0.5 g/cm^3 / 342.3 g/mol * 1000 g/L = 1.46 x 10^-3 M.

To know more about molarity click here

brainly.com/question/23686981

#SPJ11

The ocean's deep sound channel is characterized as a zone in which sound waves are able to propagate for long distances with minimal attenuation

It is  due to the unique properties of the water at that depth. The SOFAR layer is located at depths between 800 and 1200 meters, where the water temperature and pressure create a stable environment that allows sound waves to travel with little interference.

This layer acts as a barrier that traps and channels sound waves, allowing them to travel great distances without significant loss of energy. The unique acoustic properties of the SOFAR layer have important implications for oceanography, as it allows for the detection of distant underwater events such as earthquakes, volcanic eruptions, and the movements of marine mammals.

To know more about sofar layer click on below link :

https://brainly.com/question/1177283

#SPJ11

Answer:

Volume = 205

Explanation:

Using; PV = nRT

P (Pressure) = 0.634atm

V (Volume) = ?

n (Number of moles) = 4.56mol

R (Universal Gas Constant) = 0.082

T (Absolute Temperature) = 75+273 = 348K

0.634 × V = 4.56 × 0.082 × 348

V = 130.12416 ÷ 0.634

V = 205

Therefore, the maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution is 1.5 x [tex]10^{-9[/tex]M.

The maximum amount of nickel(II) hydroxide that will dissolve in a 0.169 M nickel(II) nitrate solution, we need to compare the solubility product (Ksp) of nickel(II) hydroxide with the concentration of nickel(II) ions in the solution. The balanced equation for the dissolution of nickel(II) hydroxide is:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp expression for this reaction is:

 [tex]Ksp = [Ni_2+][OH-]^2[/tex]

The Ksp value for nickel(II) hydroxide at 25°C.

If we assume that all of the nickel(II) ions in the nickel(II) nitrate solution will react with hydroxide ions to form nickel(II) hydroxide, then the concentration of nickel(II) ions in the solution will be equal to the initial concentration of nickel(II) nitrate, which is 0.169 M.

Using the Ksp expression, we can calculate the concentration of hydroxide ions required to reach the maximum amount of nickel(II) hydroxide that can dissolve in the solution:

[tex]Ksp = [Ni_2+][OH-]^2[/tex]

[tex]1.6 x 10^{-16} = (0.169 M)(x)^2[/tex]

x = 1.5 x [tex]10^{-9[/tex]  M

Learn more about solution Visit: brainly.com/question/25326161

#SPJ4