calculate mass in grams of 5.09×10^20 atoms of copper. (Atomic Mass 63.5)

Block B  will need to  absorb more energy as it has higher specific heat value.

Specific heat is defined as the amount of heat required  to raise the temperature of one gram of a substance  by one degree Celsius rise. Units of specific heat  are calories or joules  per gram per degree Celsius.

Specific heat capacity  varies with temperature often  and is different for each state of matter. While the substance which undergoes phase transition then it's specific heat is technically infinite.

Specific heat of a gas is significantly higher when it is allowed to expand  as it is heated .It may also be referred to as a ratio  between the specific heat capacities of two substances at a given temperature.It is calculated by the formula ,Q=mcT

For copper, it is 100×0.385×473=18210.5 J

For aluminium ,it is 100×0.90×473=42570 J

As  the specific heat of aluminium is higher it will absorb more energy.

Learn more about specific heat ,here:

https://brainly.com/question/11297584

#SPJ2

Answer: Matter cannot be created or destroyed in chemical reactions.

Explanation: This is the law of conservation of mass. In every chemical reaction, the same mass of matter must end up in the products as started in the reactants. Balanced chemical equations show that mass is conserved in chemical reactions.

Answer:

Your answer should be B.) C, Si, Ge, Sn! I hope this helps you! :)

Answer:

the answer is A

Explanation:

in 60 seconds there is 1 minute and in 60 minutes there is one hour

Answer:

write a question and answer it with the words

Explanation:

Gloria/ the bank/ the car

A: where is Gloria going? To the bank, right?

B: Yes, she's going to the bank. She's going in a car.

Answer:

Blue!!

I think it is blue!

is it blue cuz i think its blue

Answer:

There's No Answer Im Sorry

Answer:

It is getting thicker and keeping the Earth warmer.

Answer:

it is getting thinner and keeping the earth warmer

Answer:

Potassium iodide is a metal-halide salt that has an ionic connection between the potassium cation (K+) and the iodide anion (I–). It is colorless to white and appears as cubical crystals, powder, or white granules. It has a salty, astringent flavor. This chemical is made from iodine and potassium hydroxide.

Answer

199 ATM

EXPLANATION

assume that the volume is constant.  At higher temp the gas molecules move faster and the pressure goes up.

P=kT

CONVERT C TEMP TO K TEMP FOR GAS PROBLEMS!!!!!!

108C = 108 +273 = 381 K

441C = 441 + 273 = 714K

P=kT

108 =k x 381

K=108/381 = 0.279

AT THE HIGHER TEMP

P =0.279 X 714 =199ATM

Answer:

That would be a community.

Explanation:

A field of many different species of wildflowers is considered to be a community.

It is called biological community meaning an interacting  group of various species sharing a common location.Factors which determine overall structure of community  are number of species, abundance of each species,interaction among the species and community's ability to return to normal after a natural calamity.

Change of communities over a period of  time is called as ecological succession.Each species in a community has its own characteristic niche . The niche includes all the interactions of the species with other members of the community.An ecosystem comprises of biological community together with its physical environment.

Learn more about biological community,here:

https://brainly.com/question/17304846

#SPJ2

Answer: Well, when you decrease the temperature in a gas the volume will decrease as well as the pressure. Since, heating a gas or liquid increases the temperature/pressure. Therefore, it'd increase the volume but since the temperature is decreasing the volume of the gas does too.

Answer:

Potassium Hydroxide Solution =

or

Potassium Hydroxide =

Since we know the products and one of the reactions, we can work backward to discover what the other reactant may be.

As it is in the question, we can map the reactants and product:

Reactants                   Product

Ammonium                 Ammonia

Sulfate                         Sulfate

________                   Potassium

________                    Water

Since the reaction will yield Potassium and water, the likely reactant is Potassium Hydroxide (KOH). This is because we know that Ammonium lost a Hydrogen atom that could combine with the Hydroxide radical to form water.

This becomes clear when we consider the net ionic equation:

Ammonium sulphate + Potassium Hydroxide → potassium sulfate + ammonia + water

if we write this a balanced chemical equation:

(NH₄)₂SO₄   +  2KOH  →  K₂SO₄ + 2NH₃ + 2H₂O

if we write the reaction as an ionic equation

2NH₄⁺ + SO₄⁻ + 2K⁺ + 2OH⁻ → 2K⁺ + SO₄⁻ + 2NH₃ + 2H₂O

if we remove the ions that appear on both the reactant and product side (spectator ions)

Answer:

Glycolipid

Explanation:

These are called glycolipids.

Glyco comes from the carbohydrate, and is a word relating to sugars, which are a type of carbohydrate

Lipid is a fat/oil, and as you could have guessed, comes from the phospholipid.

Hope I helped! :)

A carbohydrate attached to a phospholipid is called a glycolipid.

Glycolipids can be described as the complex type lipid containing carbohydrates, fatty acids, and glycerol groups.  The glycosidic term is used for any molecule containing one or more monosaccharides bound by glycosidic linkage.

Glycolipids can be also called structural lipids, which are generally found in the extracellular face of the cell membranes. Different types of glycolipid are Cerebroside and ganglioside.

Glycolipids provide energy to cells and help to determine the blood group. The blood group types determine from the oligosaccharides attached to a particular glycolipid on the surface of blood cells.

It assists the immune system of the body by destroying the pathogens in the human body.

A phospholipid is a lipid that is attached to the phosphate group. When the carbohydrate molecules attached to the lipid are known as glycolipid. Glycolipid plays an important role on the cell to cell interaction and cell differentiation.

Learn more about glycolipid, here:

https://brainly.com/question/26458922

#SPJ5

Answer:

when you heat the blend, you form iron sulfide, a compound

Depending on the ratio, you could form Fe4S3 or fool's gold

Explanation:When iron filings and sulphur powder are mixed and heated they undergo a chemical reaction and form ferrous sulphide (FeS). It is a new substance which has properties entirely different from Fe and S. Therefore, heating of mixture of iron and sulphur powder is a chemical change forming a compoundf

Answer:

2689.4

Explanation:

Answer:

1.45 is larger for density

ANSWER : I AND III

HOPE IT HELPED

Answer:

i have no clue

Explanation:

umm cause i have no clue sorry lol but good luck

Answer:

Explanation:

Suppose you identify a new element, Pivotium. Pivotium has two isotopes: Pivotium-426  and Pivotium-417. In the mixture,  11% of the mixture is Pivotium-426; the rest of the mixture is Pivotium-417. What is the relative atomic mass for Pivotium?

Multiply the mass by the % written as a decimal and add the result.

426X0,11  +   417X 0.89  = 417.99 or 418

check 90% is. 417    only 10% 426

417X.9 +(426X0.10)=417.9

Answer:

4.64E14

Explanation:

First convert 645 nm to m = 6.4500E-7m. The equation for finding v with these values is the speed of light/wavelength. so 2.998E8/6.4500E-7m.

so your v or frequency would equal 4.64E14

Fun fact you know this is visible light because the visible light range is within the E14 range.

Answer:

0.5 mol of nitrogen gas.

Explanation:

18g of Magnesium in mol is equal to 18g/24 gmol-1 = 0.75 mol and 7g of nitrogen in mol is equal to 7g/14 gmol-1 = 0.5 mol,

Thus, When 18g of magnesium reacts with 7g of nitrogen it implies 0.75 mol of magnesium which reacts with 0.5 mol of nitrogen. :)

The number of moles of nitrogen gas which react with 18 g of magnesium

to form magnesium nitride compound is 0.5mol.

We need to find the number of mole for magnesium and nitrogen.

Mole= mass/molar mass

Magnesium= 18g/24gmol⁻¹ = 0.75mol of Mg

Nitrogen= 7g/14gmol⁻¹ = 0.5mol of N

This implies that when 18g of magnesium reacts with 7g of nitrogen it

means 0.75 mol of magnesium which reacts with 0.5 mol of nitrogen.

Read more on https://brainly.com/question/25169240

Random errors will shift each measurement from its true value by a random amount and in a random direction. These will affect reliability (since they're random) but may not affect the overall accuracy of a result.

Density = mass ÷ volume  

           = 217.0 g ÷ 24.3 cm³  

           = 8.93 g/cm³

∴ the unknown sample of mass 217.0 grams and volume of 24.3 cm³ has a density of 8.93 g/cm³.

Answer:

A catalyst

Catalysts speed up the rate of reaction without being changed or used up in the reaction.

Hope this helps!

Answer:

Explanation:

2C7H6O2 + 15O2 → 14CO2 + 6H2O.

Answer:

looo

rdyxvxkxkvxkgxkgdkvx

Explanation:

lolollkvvbffffkhdhlxkgzfjzufsfjsdhayzyrzruzruzufzktzkgdjfdufskdgjgzjfgkzjgskf