The figure above shows two closed containers. Each contains the same volume of acetone in equilibrium with its
Yanar at the same temperature. The vapor pressure of the acetone is

Answers

Answer 1

The vapor pressure of a liquid and the prevailing atmospheric pressure,

determines the boiling point temperature.

The vapor pressure of the acetone is the same in both containers because

the temperature is the same.

Reasons:

The vapor pressure of a liquid is the pressure at which the number of

molecules entering the gaseous phase are in (dynamic) equilibrium with

the number of molecules entering the liquid phase.

The factors that affect vapor pressure are;

The type of molecules that make up the liquid or solidThe temperature of the liquid or solid

Changing the surface area changes the instantaneous concentration of

molecules of vapor above the liquid, however, an equilibrium vapor

pressure is reached with time as more molecules enter or exits the liquid

(or solid) due being over or under saturated.

Therefore, the surface area of the liquid has no effect on a liquid's vapor

pressure therefore;

The vapor pressure in both containers will be the same because the temperature is the same.

Learn more here:

https://brainly.com/question/15171390

https://brainly.com/question/20301336

The Figure Above Shows Two Closed Containers. Each Contains The Same Volume Of Acetone In Equilibrium

Related Questions

3. What is the energy of a photon that has a frequency of 2.3 x 1014 Hz?

Answers

The energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹J

HOW TO CALCULATE ENERGY OF A PHOTON:

The energy of a photon can be calculated by using the formula as follows:

E = hf

Where;

E = energy of photon (J)

h = Planck's constant (6.626 × 10-³⁴J)

f = frequency of photon (Hz)

According to this question, a photon has a frequency of frequency of 2.3 x 10¹⁴ Hz. The energy of the photon can be calculated as follows:

E = 6.626 × 10-³⁴ × 2.3 × 10¹⁴

E = 15.24 × 10-³⁴+¹⁴

E = 15.24 × 10-²⁰J

E = 1.524 × 10-¹⁹J

Therefore, energy of a photon that has a frequency of 2.3 x 10¹⁴ Hz is 1.524 × 10-¹⁹J

Learn more at: https://brainly.com/question/23180082?referrer=searchResults

Which of the following molecules contains only single bonds?
(A)CH3CH2COOH
(B) CH3COCH3
(C) HCN
(D)C2H6
(E) CO2

Answers

Answer:

D) C2H6

Explanation:

All the other molecules contain double (or triple) bonds except for C2H6.

D. Ethane is an organic chemical compound with chemical formula C ₂H ₆. At standard temperature and pressure, ethane is a colorless, odourless gas. Like many hydrocarbons, ethane is isolated on an industrial scale from natural gas and as a petrochemical by-product of petroleum refinin

What does a
map
scale measure?

Answers

Answer:

Map scale refers to the relationship (or ratio) between distance on a map and the corresponding distance on the ground.

Explanation:

For example, on a 1:100000 scale map, 1cm on the map equals 1km on the ground.

In which range of electronegativity differences would polar covalent bonds occur?(1 point)
−1.0 to 0
0 to 1.0
0 to 0.5
0.5 to 1

This image shows electronegativities of elements on the periodic table. Based on this information, which element is most likely to form a strong ionic bond and take on electrons? (1 point)
fluorine (F)
cesium (Cs)
hydrogen (H)
helium (He)

Which option contains an example of a polyatomic ion?(1 point)
NH4
KNO3
CaCl2
MgCl

Which statement best explains the difference between polar and nonpolar covalent bonds?(1 point)
Polar covalent bonds give/take electrons, while nonpolar covalent bonds share electrons.
Polar covalent bonds share electrons, while nonpolar covalent bonds give/take electrons.
Polar covalent bonds share electrons unequally, while nonpolar covalent bonds share electrons equally.
Polar covalent bonds share electrons equally, while nonpolar covalent bonds share electrons unequally

Which statement describes the bonds in iron sulfate, FeSO4? (1 point)
Fe and S have an ionic bond, and S and O have ionic bonds, too.
Fe and S have a covalent bond, while S and O have ionic bonds.
Fe and S have an ionic bond, while S and O have covalent bonds..
Fe and S have a covalent bond, and S and O have covalent bonds, too.

Answers

Answer: 1. (0.5 to 1)

              2. (Fluorine)

              3. (KNO3

              4. (Polar covalent bonds share electrons unequally, while nonpolar covalent bonds share electrons equally.)

              5. (Fe and S have a covalent bond, and S and O have covalent bonds, too.)

Explanation:

Ye, have great day.

The periodic table is an arrangement of elements according to their periodic properties.

Polar covalent bonds are those compounds in which unsymmetrical electron distribution in bonds leads to polarity in the molecule. Examples of such compounds include; HCl, CHCl3, etc. A polar covalent bond occurs when the electronegativity differences between atoms lies within the range of 0.5 to 1.

Since electronegativity increases across the period and we also know that highly electropositive metals(having very low electronegativity) and highly electronegative nonmetals(having high electronegativity)  form a strong ionic bond, it follows that fluorine (F) and cesium (Cs) will form a strong ionic bond.

A poly atomic ion is an ion that contains more than one atom. Given the options listed NH4^+ is an example of a polyatomic ion.

The difference between polar and nonpolar covalent bonds is that polar covalent bonds share electrons unequally, while nonpolar covalent bonds share electrons equally.

In FeSO4, Fe and S have an ionic bond, while S and O have covalent bonds.

Learn more: https://brainly.com/question/9328418

Which choice is an element?

A. Salad
B. Sugar
C. Water
D. Potassium

Answers

Answer: D. Potassium

Explanation:

A. Salad- a mixture of vegetables or fruits❌

B. Sugar- a compound made up of many elemnts❌

C. Water-  a molecule made up of two elements (water and hydrogen)❌

D. Potassium- the only pure element of the options provided.✅

Answer:

D, potassium

Explanation: took test ! btw

why concentrated acid is hazardous material​

Answers

Answer:

Here's it.

Explanation:

Concentrated acids are very corrosive and dangerous chemicals that are commonly encountered in the laboratory. ... Concentrated acids may be fatal if inhaled; and can cause severe eye and skin burns, severe respiratory and digestive tract burns. Contact with other materials may cause a fire.

Answer:

The more concentrated acid something is the more strength it has.

Explanation:

If it is very strong it could melt a spoon, and burn human flesh, I don't think this needs further explanation.

How many cc of methane at not is required to react completely with 20cc of oxygen? Please helps meee!

Answers

Answer:22.4 L methane reacts with 44.8 L of oxygen to give 22.4 L of CO  

2  and 44.8 L of water.

Explanation:

5. What is a habitat?
a) An area of human development
b) A protected area for endangered species
c) The natural home or environment of an animal, plant, or other organism
d) An area where no species live
It's for science ​

Answers

Answer:

c) The natural home or environment of an animal, plant, or other organism

Explanation:

Please note that in order to post questions in Science, you must post in Science section, but not in History. You are asking a wrong question in the wrong section.

Thank You! Please Mark Brainliest! :)

the answer is c

a habitat is a place for any organism to live in.
a zoo is a habitat, the woods are a habitat, houses are a habitat.

please help :((
Which of the following atoms has the largest radius?
1. Na
2. H
3. Ar
4. P
5. F
6. AI

Answers

your answer would be 5.

Por que los egipcios podrían haber construido pirámides?

Answers

Eran monumentos funerarios, de manera que su principal función era la de acoger tumbas de los faraones para que el viaje al cielo fuese más sencillo

Someone pls help me I will make you brain

Answers

Answer:

a

Explanation:

i took test

Which of the following is a liquid someone help!!!!!

Answers

Juice cause it’s the only thing that will go down ur throat like it’s a slip in slide

THE ANSWER IS ON THE PICTURE HOPE IT HELPS

Building Vocabulary
Match each term with its definition by writing the letter of the correct definition on
the line beside the term in the left column.
5. nucleus
6. proton
D
7. neutron
c.
8. electron
9. atomic number
10. isotopes
a. the sum of protons and neutrons in the nucleus of an
atom
b. the very small center core of an atom
atoms of the same element that differ in the number
of neutrons, but have the same number of protons
d. the particle of an atom that moves rapidly in the
space outside the nucleus
a specific amount of energy related to the movement
of electrons in atoms
f. the particle of an atom with a positive charge
g. the number of protons in the nucleus of every atom
of an element
h. the particle of an atom that is neutral
11. mass number
e.
12. energy level
a

Answers

Answer:

Explanation:

Building Vocabulary

Match each term with its definition by writing the letter of the correct definition on

the line beside the term in the left column.

5. nucleus   b

6. proton     f

7. neutron   h

8. electron  d

9. atomic number    g

10. isotopes              c

11. mass number      a

12. energy level       e

a. the sum of protons and neutrons in the nucleus of an

atom

b. the very small center core of an atom

c. atoms of the same element that differ in the number

of neutrons, but have the same number of protons

d. the particle of an atom that moves rapidly in the

space outside the nucleus

e. a specific amount of energy related to the movement

of electrons in atoms

f. the particle of an atom with a positive charge

g. the number of protons in the nucleus of every atom

of an element

h. the particle of an atom that is neutral

-. mass number  a.

12. energy level    e

when is it appropriate to form double or triple bonds in a lewis structure?

Answers

It is appropriate to form double or triple bonds in a Lewis structure when four or six electrons are shared.

A Lewis structure is a representation of a molecule using dots to show the valence electrons in the molecule. This dots are shown around the symbols of the elements.

However, in instances where four or six electrons are shared between bonding atoms, a double or triple bond is used. A double bond means that four electrons are shared. A triple bond means that six electrons are shared.

Learn more: https://brainly.com/question/1527403

what is the amount of heat required to completely melt a 200

Answers

A 200 what? Then I can help!

Explain error and how it can impact your results from an experiment.

Answers

Answer:

Random errors will shift each measurement from its true value by a random amount and in a random direction. These will affect reliability (since they're random) but may not affect the overall accuracy of a result.

please help with the question attached
I need it in an hour​

Answers

Answer:

iiiiiiddddiiilllooeiuehe

discuss the separation of solid of different sizes​

Answers

Answer:

Chromatography involves solvent separation on a solid medium. Distillation takes advantage of differences in boiling points. Evaporation removes a liquid from a solution to leave a solid material. Filtration separates solids of different sizes.

Explanation:

give brainliest

Learning Task No. 3: Complete the following sentences by filling in the appropri-​

Answers

Can you please state full question also more context about the homework please

carbon cycle carbon cycle ​

Answers

Carbon is found in various forms on the Earth.It occurs in the elemental form as diamond and graphite, in the combined state as carbon dioxide, carbonate and bicarbonate salts in various minerals, while all biotic factors are based on carbon-containing molecules like carbohydrates, proteins, fats, nucleic acids and vitamins. The endoskeletons and exoskeletons of various animals are also formed from carbonate salts. Carbon is incorporated into life-forms through the process of photosynthesis which is performed in the presence of Sunlight by all life-forms that contain chlorophyll.Photosynthesis converts CO2 from the atmosphere or dissolved in water into glucose molecules.These glucose molecules are either converted into other substances or used to provide energy for the synthesis of other biologically important molecules.The utilisation of glucose to provide energy to living things involves respiration in which oxygen may or may not be used to convert glucose back to carbon dioxide.This CO2 goes back into the atmosphere.This is the broad outline of carbon cycle.

Hope you could get an idea from here.

Doubt clarification - use comment section.

suppose that hypothetical element Jovian occurs as three isotopes with mass numbers 44, 46, and 48 respectively. If, in nature, Jovian occurs as Jovian-44 approximately 22.4% of the time, and as Jovian-46 approximately 44.0% of the time, what is the best value to use as the atomic mass of Jovian?

Answers

Answer:

46.2 amu

Explanation:

The average atomic mass of an element can be determined using the percentage abundance and mass of its isotopes. The average atomic mass of the hypothetical element Jovian is 46.2 amu.

What is average atomic mass?

Most of the elements have two or more isotopes in nature with different percentage abundance and mass. The average atomic mass of the element is then calculated using the formula written below:

Average atomic mass = % abundance /100 × mass of isotope 1  +  % abundance /100 × mass of isotope 2 + .....

Given the mass % abundance of Jovian -44 = 22.4 %

Jovian- 46 = 44 %

Jovian -48 = (100 - (44 + 22.4)) = 33.6 %

Average atomic mass of Jovian  =  ( 22.4 /100 × 44 ) +  ( 44 /100 × 46) +  ( 33.6  /100 × 48 ) = 46.2 amu

Therefore, the average atomic mass of the hypothetical element is 46.2 amu.

To find more on isotopic mass, refer here:

https://brainly.com/question/18387647

#SPJ2

If a chemical reaction occurs in a flask, and the flask becomes colder, the reaction was exothermic. true or false

Answers

Answer:

false

Explanation:

hope this helps you

Answer:

False, if the flask becomes colder it's endothermic. I hope this helps! :)

a. Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Answers

Answer:

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Which line represents travel at the fastest speed? Justify your answer.__

b. Describe the line that should be added for an object that is not moving with respect to the chosen reference point.__

Answer the question using 5 complete sentences and the vocabulary terms; velocity, position, and distance

Explanation:

Someone pls help me I will make you brain

Answers

Answer:

A catalytic converter

Explanation:

Diesel filters are used to clean fuel not emissions, engine injection puts fuel directly into the engine and a transmission clutch changes the cars transmission.

Answer:

carbon monoxide and nitrogen oxide are needed to be properly maintained

Cho 200 g dung dịch NaCl 0,5M tác dụng hết với 400 ml AgNO3. Sau phản ứng thu được kết tủa và dung dịch không màu
a, Viết phương trình hóa học xảy ra?
b, Tính khối lương kết tủa tạo thành
c, Tính nồng độ mol của dung dịch AgNO3 đã tham gia phản ứng.

Answers

Answer:

Explanation:

a. NaCl+ AgNO3-----> NaNO3+ AgCl

b. Số mol của NaCl= 0,2*0,5= 0,1 (mol)

------> Số mol của kết tủa AgCl tạo thành= 0,1 mol (dựa vào phương trình hóa học)

-----> Khối lượng của kết tủa AgCl tạo thành= 0,1*143,5=14,35(g)

c. Số mol của AgNO3= số mol của NaCl= 0,1 (mol)

------> Nồng độ mol của dd AgNO3 đã tham gia phản ứng= [tex]\frac{0,1}{0,4}[/tex]=0,25(M)

A student fills two syringes: one with air and the other with an equal volume of
water. After capping the syringes, the student applies the same amount of
pressure to the plungers and records observations about the change in volume.
Based on the particle model of matter, which of the following statements best
explains the student's observations that the volume of the gas decreases greatly
but the volume of the liquid does not change noticeably?*
Gases expand to fill their containers but liquids do not because particles of gases are
free to move but particles of liquids are fixed in position.
Gases take the shape of their containers but liquids do not because gas particles
have the ability to flow but liquid particles do not.
Gases can have larger changes in volume than liquids can because gas particles
expand and contract but liquid particles do not.
Gases are more readily compressed than liquids are because there is more space
between the particles in a gas than in a liquid.

Answers

Here we need to see the differences between a liquid and a gas, and how that affects the volume and effects of pressure on them.

The correct option is:

Gases are more readily compressed than liquids are because there is more space  between the particles in a gas than in a liquid.

So we have two syringes, one with air and the other with water.

The student applies the same amount of pressure to both of them, but as water is denser than air, in a given change dV of volume in the syringe, the mass of water is larger than the mass of air.

This means that for the same pressure, we should expect the change in volume to be smaller in the syringe with water.

Why this happens?

Gases are more readily compressed than liquids are because there is more space  between the particles in a gas than in a liquid.

This means that for the air is easier to be compressed (the distance between particles is larger, so the same pressure compresses more a gas than a liquid) and exit the syringe than for the water, and this translates to the change in volume per unit of pressure applied, which is larger for gases than liquids.

If you want to learn more, you can read:

https://brainly.com/question/1898264

Số amin bậc một có cùng công thức phân tử C3H9N là

A. 3. B. 1. C. 2. D. 4

Answers

Answer:

A.3

Three primary amines

Ba amin chính

When you rub an inflated balloonon your head on a dry day,it can make your hair stand up! what force is that?

Answers

When you rub an inflated balloon on your head and it makes your hair stand up, the force that makes the hair stand up is known as static electricity.

When the balloon is rubbed on the head, electrons from the hair atoms move into the balloon, thus making the balloon to be negatively charged and the hair positively charged due to loss of electrons.

Unlike charges attracts. Thus, when you try to pull the balloon away slowly, the positively charged hair and the negatively charged balloon will attract each other and this is usually what makes the hair stand up.

More on static electricity can be found here: https://brainly.com/question/24160155

Answer:

static electricity

Explanation:

this is because there is an imbalance between negative and positive charges

when you keep on rubbing, a negative charge is created which is carried by electrons.

when you pull the balloon away slowly, the opposite charges attract to each other which makes your hair attract to the balloon

Using the periodic table, explain which pair of the following gases have the most similar properties and why. Nitrogen (N), Fluorine (F), Neon (Ne), Krypton (Kr), and Oxygen (O).

Answers

Neon (Ne) and Krypton (Kr) because they are both noble gasses and in the same group (group 18). Elements in the same group share similar chemical properties.

a noncovalent interaction between two molecules is known as

Answers

The three major types of intermolecular interactions are dipole–dipole interactions, London dispersion forces (these two are often referred to collectively as van der Waals forces), and hydrogen bonds.

A non-covalent interactions between  molecules are van der Waal's forces and hydrogen bonds.

What are non-covalent interactions?

Non-covalent interaction is an interaction which does not involve sharing of electrons and in this aspect it differs from covalent bond.It rather involves dispersed variations  of electromagnetic interactions  which are present between the molecules or within the molecule.

The energy released during the formation of these interactions  is of the order of 1-5 kcal .They are classified as electrostatic, pi effects , van der waals forces  and hydrophobic effects.

They are important in maintaining the three dimensional structure of large molecules such as proteins ,nucleic acids ,etc.They are also involved in biological processes . They heavily influence drug design process and design of materials.

Learn more about non-covalent interactions,here:

https://brainly.com/question/10736477

#SPJ2

Other Questions
helpp plss so i can get an good grad!! its for science but i just put history 1. Two balloons are charged with an identical quantity and type of charge: -6.25C. They are held apart at a separation distance of 0.67m. Determine the magnitude of the electrical force of repulsion between them. I 1. Ang mga magulang ba ay responsable sa paghubog ng pananampalataya ng kanilang mga anak? Bakit? I NEED URGENT HELP PLSS Atoms of which two elements could combine with atoms of carbon (C) toform covalent bonds?A. SB. NaC. ND. KE. Ca In your own words, explain why elementssuch as gold and silver are so rare to befound in our Universe or within the Earth? Think of an important decision the protagonist in the short story you read in Module One makes. In 35 sentences, explain why the character makes that decision and how the decision affects the rest of the story. Use specific examples from the short story to support your answer. Be sure to identify the title of the short story. The story is Hamadi... What is the equation for the line that is parallel to the x-axis and passes through the point (5, -2)? tan9. tan27. tan45. tan72. tan81= 1could u plz solve it with clear process Referring to the figure, find the unknown length x. A jar contains 0.65 liter of lime juice and 0.40 liter of orange juice. Meg poured 0.35 liter of cranberry juice into the jar. She then drank 0.10 liter of the mixture.Part A: Write an expression to represent the total amount of juice left in the jar. (5 points)Part B: Simplify the expression and identify which property is used in each step. (5 points) which kind of front usually forms long, thin stratus clouds? The coefficient of x in the expansion of (x+3)(x - 1) is The additive inverse of a - b is? Max ran 100 feet in 10 seconds.Molly ran 60 feet in 5 seconds. 1. Who ran farther, Max or Molly?2. Who ran faster? Explain. the number of people in each legislative district must be roughly equal based on the total number of what? When Saul visited Samuel, Samuel lived in__________.CarmelJerusalemRamahplease please help!! Mrs. Jackson had 493 canned goods that she collected for the annual canned food drive. She put all the cans in 7 equal piles. About how many cans are in each pile? How many __________ pets have you got ? X=(150^2sin(242))/9.8