A 0.0733L balloon contains 0.00230 mol at a pressure of 0.924 atm.
V=0.0733 L
n=0.00230
P=0.924 atm
From the ideal gas law:
T=PV/nR
T= 359.12K
What is the ideal gas law?
The right fuel law, additionally known as the general gasoline equation, is an equation of the state of a hypothetical perfect gasoline. Despite the fact that the best gasoline law has numerous barriers, it is a superb approximation of the behavior of many gases underneath many situations. Benoit Paul Émile Clapeyron stated an appropriate gasoline regulation in 1834 as a combination of the empirical Charles’s regulation, Boyle’s regulation, Avogadro’s regulation, and gay-Lussac’s regulation.The perfect gas law states that the made of the strain and the volume of 1 gram molecule of a really perfect gasoline is the same to the fabricated from the absolute temperature of the gas and the prevalent gasoline consistent.To know more about the ideal gas law, click the link given below:
https://brainly.com/question/6534096
#SPJ4
Why can gae change volume?A. The ga particle have no ma, o they can change volume. B. Gravity ha no effect on ga particle, o they can float away. C. There are no force holding the ga particle together. D. The force holding the ga particle together are tronger than gravity
The gases changes its volume because there are no force holding the gas molecules together. Hence the option C is correct.
Gases do not have a definite shape or volume because the molecules in the gases are very loosely packed, they have large intermolecular spaces , hence they move around. The force of attraction between the molecules is also very less, as a result gases acquire any shape or any volume. In comparison to liquids and solids, intermolecular interactions between gas particle are weaker. Because the atoms in gases are loosely connected to one another, they can move more quickly than those in liquids. Thus, gases lack both a defined shape and a defined volume. They merely assume a container-like shape.
So, gas molecules can break loose easily from any boundary and can fill any space. Hence, they do not contain any definite volume.
To know more about properties of gases, please refer:
https://brainly.com/question/6140407
#SPJ4
Rank the following atoms and ions from least to greatest ionization energy:
Ca2+ Ar Cl- S2-
Chlorine has the highest first ionization energy.
The ionization power is a degree of the capability of detail to enter into chemical reactions requiring ion formation or donation of electrons. it is also typically associated with the character of the chemical bonding inside the compounds fashioned by using the factors. See additionally binding power; electron affinity.
In physics and chemistry, ionization electricity, ionization power is the minimum strength required to remove the most loosely certain electron of an isolated gaseous atom, wonderful ion, or molecule.
On the periodic desk, first ionization strength commonly will increase as you circulate left to right throughout a length. that is because of increasing nuclear charge, which results in the outermost electron being greater strongly certain to the nucleus.
Learn more about ionization energy here:-https://brainly.com/question/13088843
#SPJ4
The balanced combustion reaction for C6H6
is
2C6H6(l)+15O2(g)⟶12CO2(g)+6H2O(l)+6542 kJ
If 8.400 g C6H6
is burned and the heat produced from the burning is added to 5691 g
of water at 21 ∘
C, what is the final temperature of the water?
Final temperature is 30.3ºC
What is Temperature?
The term "temperature" refers to a measurement of an object's average kinetic energy, which is a category of energy linked to motion and used to describe how hot or cold an object is. But how hot and how frigid are they exactly? Hot and cool are not really scientific concepts. A physical scientist would check the metal's liquid state's temperature to find the answer. It is less confusing to use temperature instead of phrases like hot or cold.
The reaction's H is -6542 kJ as written. The heat produced by igniting 2 moles of C6H6(l) and producing 12 moles of CO2(g), for example, is represented by this.
We can determine moles of C6H6 combusted from the given mass of C6H6. We can then calculate the heat that would be produced based on that value. We can determine the change in water temperature after determining the amount of heat produced.
0.06785 moles are equal to 5.300 g C6H6 x 1 mol/78.11 g.
heat produced is equal to 221.9 kJ/0.06785 moles x 6542 kJ/2 moles.
q = mC∆T
(5.691 kg)(4.184 kJ/kg/deg)(T) = 221.9 kJ
T is equal to 221.9 kJ/(5.691 kg)(4.184 kJ/kg/deg).
T=9.3 degrees.
Final temperature equals 21° plus 9.3°, or 30.3°C
Learn more about Temperature from given link
brainly.com/question/24746268
#SPJ1
write the ka reaction for trichloroacetic acid, cl3cco2h (ka 5 0.3), for anilinium ion, and for cu21 (ka 5 3 3 1028)
Ka = [Cl3CCOO⁻] [H⁺] / [Cl3CCOOH] = 0.3
Ka = [C6H5 -NH2] [H30⁺] / [C6H5-NH3⁺] = 2.51ₓ10⁻⁵
Ka = [Cu (OH3)] ⁻[H⁺] ³/[Cu²⁺] = 3ₓ10⁻⁸
To know if a substance will act as an acid or a base in a reaction, we look at the functional group.
How to find acidic strength?
trichloroacetic acid (and carboxylic acids in general) have carboxylic group - O- H which dissociates into aqueous solution into COO⁻ + H+ ions. Since it gives protons in aqueous solution, it acts as an acid
Amines Ar -NH are bases. They react with water to produce hydroxide ions.
Protonated amine is the conjugate acid. It reacts with water to provide
Cu2+ reacts with water to provide protons. Hence, Cu2+ acts as an acid.
Among trichloroacetic acid, anilinium ion and Cu2+ ion, Ka value is maximum for trichloroacetic acid. Hence, trichloroacetic acid is the strongest acid.
Note: Higher is the Ka value, greater is the acid strength.
For more information about acidic strength please visit:
https://brainly.in/question/2426352
#SPJ4
true or false; water is not commonly used on combustible metals as it may react violently, especially with magnesium and sodium, causing explosions.
Answer: false
Explanation: Sodium reacts vigorously with cold water forming sodium hydroxide (NaOH) and hydrogen (H2). The reaction of sodium metal with water is highly heat producing due to which the hydrogen gas formed during the reaction catches fire and burns causing little explosions.
Magnesium metal does not react explosively with water…. Unlike the LOWER Group 2 metals, i.e. calcium, strontium, etc., the reaction of magnesium with water is rather sluggish… formation of magnesium oxide passivates (as it is called) the surface of the metal and prevents rapid oxidation…
if 93.75% of a radioactive isotope of technetium-99 remains after 24 hours, what is the half-life?
93.75 % of the Tc sample is remaining after 24 hours. The half life of the Tc is thus, 266 hours or 11 days.
What is half life?Half life of a radioactive material is the time taken to decay its half amount. The decay constant k is related to the half life by the expression:
k = 0.693/ t1/2.
Radioactive decay is a first order reaction. Let N0 be the initial amount and Nt be the final amount and t be the time for decay, then,
k = 1/t ln (N0/Nt)
Given Nt = 93.75 %
N0 = 100%.
t = 24 hr.
K = ln (93.75 / 24 hr)/ 24 hr.
= 0.0026 hr⁻¹.
Now the half life t1/2 = 0.693 / 0.0026 hr⁻¹
= 266 hr = 11 days.
Therefore, the half life of the technetium sample is 11 days.
To find more on half life, refer here:
https://brainly.com/question/16387602
#SPJ1
Which of the following equations shows a physical change? (1 point)
O CaCOg →) CaO + CO,
O N₂O5NO₂ + O₂
O H₂O(s)→ H₂O(l)
O C12H22O11 + 1202 12CO₂ + 11H₂O
(I need this now lol)
Atoms of hydrogen are then balanced. Watch the following video to learn more about oxygen atoms. C12H22O11 with 12O2 equals 12CO2 plus 11H2O.
How to find Balance equations ?Balance C12H22O11 + O2 CO2 + H2O
Word formula: Sucrose + Oxygen + Carbon + WaterIt is a combustion reaction, which is the type of chemical reaction involved.Strategies for Keeping Things Balanced: In these reactions, oxygen is being added along with sucrose, which is often known as table sugar. We were burning sugar, in other terms. As a result, this is an instance of combustion.First, adjust the coefficient in front of the CO2 molecule to balance the carbons. You may now begin balancing this equation using that information.As the coefficient for CO2, you should use 12.Atoms of hydrogen are then balanced. Watch the following video to learn more about oxygen atoms.C12H22O11 with 12O2 equals 12CO2 plus 11H2O.To Learn more About Atoms of hydrogen refer to:
https://brainly.com/question/20290989
#SPJ1
Which of the following examples is a compound containing an ionic bond?
O A. 0₂
о B. H20
O C. Cao
OD. CHA
Metals and non-metals come together to produce CaO ionic bonds. The only metals and non-metals, respectively, are calcium and oxygen. The remaining choices are covalent bonding (bonds between non-metals).
Ionic bonds, also known as electrovalent bonds, are a type of linkage created in a chemical molecule by the electrostatic attraction of ions with opposing charges. When the valence (outermost) electrons of one atom are permanently transferred to another atom, a bond of this kind is created.The exchange of one or more electrons between atoms results in the formation of ionic bonds between two or more atoms. Positive ions called cations and negative ions called anions are created during electron transfer. Ionic materials can be found as crystalline solids.For more information on ionic bonds kindly visit to
https://brainly.com/question/11527546
#SPJ1
. calculate the emission wavelength (nm) of excited atoms that lie 3.371 1019 j per molecule above the ground state.
The emission wavelength (nm) of excited atoms are −54.44 eV.
The equation E=hc can be used to determine the emission line's wavelength. The energy difference between the excited state and ground level is indicated here by the symbols E, h, c, and.
How much energy is required to reach the first excited state from the ground state?An atom's ground state and excited state differ in energy by a factor of 31019 J.
How is the excited state determined?Atoms that resemble hydrogen, i.e. The energy levels for H, He+, Li2+, etc. are provided by:
En=Z2 = 13:61 eVn2. where n is the quantum level and Z is the atomic number.
E2=−22⋅13.61 eV22. =−13.61 eV.
E1=−22⋅13.61 eV12. =−54.44 eV.
To know more about wavelength visit:-
https://brainly.com/question/12924624
#SPJ4
if your chemistry grade is broken down so that 40% of it is based on homework, 40% on lab reports, and 20% on exams, and your average scores (out of 100 points in each area) are homework–95, labs–83, and exams–77, what would your weighted average be?
95 marks in 100 means you scored 95 % in homework. Similarly 83% in labs and 77% in exams. Thus the weighted average will be 85 %.
What is average?Average of a set of values is their sum divided by their number. The average of a set with even number of values, will be their sum divided by number where the average comes in a range of the set of values.
Average of odd number of values will be the exact middle value of the set.
Given that marks in homework out of 100 = 95
labs = 83
exams = 77.
Thus, average of your marks percentage = (77 + 83 + 95)/3
= 85%.
Therefore, the average percentage of the marks is 85%.
To find more on average, refer here:
https://brainly.com/question/27851466
#SPJ1
Which of the following samples of gas would have a new volume of 2.00 liters if the pressure is decreased from 4.00 atm to
2.00 atm at constant temperature?
6.00 L
8.00 L
4.00 L
1.00 L
Answer: 1.00 L
Explanation: Pressure and Volume are inversely proportionate. The volume increases at a factor of 2, from 1.00 L to 2.00 L. This means the pressure would decrease by a factor of 2, from 4.00 atm to 2.00 atm. Think about it, if you had a box and it doubled in the space, the same amount of gas is still in the container and the pressure would be half as much as these gas particles would have half the amount of collisions against the walls
Calculate the frequency of light emitted when an electron in a hydrogen atom makes each of the following transitions.
a) n = 4 →→ n = 3
b) n = 5 →→ n = 1
c) n = 5 →→ n = 4
d) n = 6 →→ n = 5
Consequently, v=hE=6. 61010 is the frequency of the light emitted.
How can you figure out the wavelength of light that a hydrogen atom emits during a transition?The Rydberg Formula The Rydberg's Formula, 1=RZ2(1n2i1n2f), determines the wavelength of a photon absorbed by an electron transition. 1 = R Z 2 (1 n I 2 1 n f 2), where is the photon's wavelength, ni is the energy level's starting principal quantum number, and nf is the last principal quantum.
What is the light frequency formula?fλ = c
The equation f = c, where c is the speed of light, connects frequency (f) with wavelength (). Since the speed of light is constant, this equation must be maintained whether the frequency is increased or decreased because the wavelength must decrease.
To know more about frequency visit:-
https://brainly.com/question/5102661
#SPJ4
what are organelles explain
Answer:
I hope this helped
Explanation:
An organelle is a subcellular structure that has one or more specific jobs to perform in the cell, much like an organ does in the body. Among the more important cell organelles are the nuclei, which store genetic information; mitochondria, which produce chemical energy; and ribosomes, which assemble proteins.
A 0. 307-g sample of an unknown triprotic acid is titrated to the third equivalence point using 35. 2 ml of 0. 106 m naoh. Calculate the molar mass of the acid.
Based on the nature of the acid as a triptotic acid, the molar mass of the acid is 247 g/mol.
What is a triprotic acid?
A triprotic acid is an acid which produces three moles of protons when dissolved in water.
The equation of the reaction at equivalence can be shown as follows;
H₃X + 3 NaOH ⇒ Na₃X + 3 H₃O
where X is the counter ion of the triprotic acid.
The ratio between the reacted acid and base at the third equivalence point = 1:3
The moles of substance reacted is calculated with the formula given below:
moles of substance reacted = molarity * volume
moles of NaOH reacted = 0.106M * 0.0352L = 0.003731 mole.
Thus, moles of H₃X reacted = 0.003731 moles /3
moles of H₃X reacted = 0.001244mole.
The molar mass of the acid can be calculated using the formula below:
molar mass = mass /moles
molar mass of the acid = 0.307g / 0.001244mole
molar mass of acid = 247 g/mol
Therefore, the molar mass of the acid is 247 g/mol.
Learn more about molar mass click-
brainly.com/question/15476873
#SPJ4
Calculate the kinetic energy of the cart at the point shown below. It has a mass of 800 kg, is 80 m high, and is moving at a velocity of 10 m/s.
Answer:
To calculate the kinetic energy of an object, we use the formula KE = 1/2 * m * v^2, where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object. In this case, the kinetic energy of the cart would be calculated as follows: KE = 1/2 * 800 kg * 10 m/s^2 = 4000 J.
Explanation:
However, it's important to note that the kinetic energy of an object depends not only on its mass and velocity, but also on its height. In the case of a cart moving down a slope, the potential energy it has due to its height will be converted into kinetic energy as it moves. Therefore, in order to accurately calculate the kinetic energy of the cart, we would need to know its height relative to some reference point (such as the ground), as well as its velocity.
the half-life of radium-226 is 1620 years. how long will it take for the original amount to be reduced by 55%?
If the half-life of radium-226 is 1620 years. The for 55% decomposition of its original amount will take 1397 years.
Calculate the half-life by using the formula as,
A(t) = I(0.5)^t/t1/2
Where t1/2 = half life = 1620
Final amount, A(t) = 0.55 of its original amount = 0.55I
Hence, we have
0.55I = I(0.5)^t/1620
Taking the log of both sides we get,
log(0.55) = log(0.5)^t/1620
t/1620 = log(0.55) / log(0.5)
t/1620 = 0.8624964
t = 0.8624964 × 1620
t = 1397.2441
t = 1397 (nearest whole number)
Hence, for 55% decomposition of its original amount will take 1397 years.
Learn more about half life from the link given below.
https://brainly.com/question/14883322
#SPJ4
Inherited traits are
Inherited traits are defined as a trait or a variant which is encoded by DNA and passed from one generation to another.
What is DNA?DNA is a hereditary material which is present in human beings as well as all other living organisms. Every cell which is present in an organism's body has DNA which is the same. Most of the DNA is situated in the cell's nucleus and small amount of it can be found in the cell's mitochondria as well.
Information which is stored in DNA is stored as codes made up of four chemical bases namely, adenine, thymine , cytosine and guanine.Human DNA consists of 3 billion bases .The order of the bases determines information which is required for building and maintaining an organism.
Learn more about DNA ,here:
https://brainly.com/question/30006059
#SPJ1
how much concentrated solution would it take to prepare 2.65 l of 0.515 m hcl upon dilution with water?
Concentrated solution that it would take to prepare 2.65 l of 0.515 m Hcl upon dilution with water is 131 ml.
What is concentrated solution?A solution that has a relatively large amount of dissolved solute is known a concentrated solution .
As we know,
And , moles of hydrochloric acid = M₁ * V₁= M₂ * V₂
Now, V₁ = V₂ * M₂/M₁
Given,
M₂ = 0.515 M
V₂ =2.65 L
As the hydrochloric acid can be concentrated up to 38% p/V ,
Therefore, maximum M₁ =38% p/V = 38 gr/ 0.1 L / 36.5 gr/mol = 10.41 M
Now, min V₁ = V₂ * M₂/ max M₁
= 2.65 L* 0.515 M/ 10.41 M
= 0.131 L
= 131 ml
So, the quantity required can go from 131 ml up to 2900 ml ( if M₁ = M₂)
To know more about concentrated solution, refer
https://brainly.com/question/17206790
#SPJ4
What organelles can only be seen in detail using an electron
microscope?
Should the EPA grant the permit to raise fish off of the coast?
No, EPA should not grant the permit to raise fish off of the coast.
What is EPA rule?EPA full form is Environmental Protection Agency. To safeguard beaches, the EPA collaborates with states, tribes, territories, local governments, and the general public.
The EPA enforces various rules that restrict water pollution sources to our coastal beaches and ocean water.
(i) the Clean Water Act;
(ii) the Clean Boating Act; and
(iii) the Oil Pollution Act.
The EPA broadened its efforts to enhance the quality of coastal recreation waters and safeguard beach goers' health.
So, EPA should not grant the permit to raise fish off of the coast.
To know more about EPA refer to:
https://brainly.com/question/14956213
#SPJ1
which represents a balanced equation of sulfurous acid with lithium hydroxide to form water and lithium sulfite.
The balanced chemical equation for the reaction of sulfurous acid with lithium hydroxide to form water and lithium sulfite is given as below.
2 LiOH + H₂SO₃ → Li₂SO₃ + 2H₂O
The formula of lithium hydroxide is given as LiOH
The formula of sulfurous acid is given as H₂SO₃
the formula of lithium sulfite is given as Li₂SO₃
The reaction will be:
LiOH + H₂SO₃ → Li₂SO₃
Let us balance the equation
In order to balance Lithium will put two against LiOH.
2 LiOH + H₂SO₃ → Li₂SO₃
Sulfur is already balanced.
To balance oxygen add water to deficient side.
2 LiOH + H₂SO₃ → Li₂SO₃ + 2H₂O
This above reaction is the balanced equation.
Learn more about balanced chemical reaction from the link given below.
https://brainly.com/question/28659858
#SPJ4
Select the correct answer from each drop-down menu. a molecule of chlorine has atoms of the same element, and a molecule of carbon dioxide has different kinds of atoms. based on this information, chlorine is and carbon dioxide is______ .
Chlorine is an element and carbon dioxide is a compound, this is the answer to the above question.
The matter is divided into categories using elements, compounds, and mixtures. Because all of the atoms in the simplest chemical compounds are the same size, they are referred to as elements. Compounds are made up of two or more elements that are chemically linked together in a certain sequence.
Elements, which are subcategories of atoms, may be defined by the same amount of protons. An element's atoms have the same number of protons, but its mass and number of neutrons may differ.
A compound is a substance that combines two or more distinct elemental kinds in a certain ratio of its atoms. During the process of fusion, some of the distinctive attributes of the constituent pieces are lost while the newly formed molecule picks up new traits. Compounds are represented using chemical formulae.
To know more about Chlorine visit:
https://brainly.com/question/14962130
#SPJ4
Answer:
Explanation:
chlorine is an element while carbon dyxoide is a compound
F2 + 2NaCl --> 2NaF + Cl2 (g)
7.6 g of F2 completely reacts with 23.2 g NaCl to produce 14.0 g of Cl2 (g). What mass in grams of NaF is produced?
The mass of NaF that will be produced when 7.6 g of [tex]F_2[/tex] completely reacts with 23.2 g NaCl to produce 14.0 g of [tex]Cl_2[/tex] gas would be 16.80 grams.
Stoichiometric problemFrom the balanced equation of the reaction between [tex]F_2[/tex] and NaCl below:
[tex]F_2 + 2NaCl -- > 2NaF + Cl_2 (g)[/tex]
The mole ratio of the 2 reactants is 1:2. We need to find the limiting reactant.
Recall that: mole = mass/molar mass
Molar mass of [tex]F_2[/tex] = 38 g/mol
Molar mass of NaCl = 58.44 g/mol
Mole of 7.6 g [tex]F_2[/tex] = 7.6/38 = 0.2 mol
Mole of 23.2 g NaCl = 23.2/58.44 = 0.40 mol
From the calculated moles, there is no excess reactant.
The mole ratio of NaCl to NaF is 1:1. Hence, the equivalent mole of NaF produced will also be 0.40 mol.
The molar mass of NaF is 41.99 g/mol.
Mass of 0.40 g NaF = 0.40 x 41.99
= 16.80 grams
In other words, the amount of NaF that will be produced when 7.6 g of [tex]F_2[/tex] completely reacts with 23.2 g NaCl to produce 14.0 g of [tex]Cl_2[/tex] gas would be 16.80 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/28297916
#SPJ1
Select all that apply
What two things are credited with creating the "global village?" (Choose every correct answer.)
Electronic media
Corporate sustainability
Convenient air travel
Assembly line production
The two things that are credited with creating a global village is: Convenient air travel and Electronic media.
What is a Global Village?This can be described as a method where people from the globe or universe are able to communicate and meet each other sometimes without physical contact.For an effective global village to be created, a good electronic media needs to be present. It will help people of all kinds communicate easily. A convenient air travel system also needs to be present for ease of movement.Herbert Marshall Mcluhan is a canadian philosopher, he predicted the world wide wide when he said nearly 60 years ago that the rise of electronic media would initiate a global village, reducing distance barriers. He also stated that the medium of communication is the message itself. This statement gave rise to the world wide web thirty years later and is the cornerstones of media theory and technologies.To learn more about Global Village here:
brainly.com/question/18920282
#SPJ4
Write the balanced COMPLETE
ionic equation for the reaction
when aluminum nitrate and sodium
hydroxide are mixed in aqueous
solution. If no reaction occurs,
simply write only NR. Be sure to
include the proper phases for all
species within the reaction.
Answer: Al(NO3)3 + 3NaOH ==> Al(OH)3 + 3NaNO3
Explanation:
NH₄NO₃ + NaOH ---> AlOH3 + 3NaNO3
Al(NO3)3 + 3NaOH ==> Al(OH)3 + 3NaNO3
Aluminium Nitrate + Sodium Hydroxide ----> Aluminium Hydroxide + Sodium Nitrate
Mr. Vincent, the psychology teacher, invited his students stay after school to participate in a study on learning styles so that he could better understand how to teach them. 25 of his students participated.
Is this a random sample of the teacher's students?
Determine the concentration of a solution prepared by diluting 20. 0 mL of a 0. 200 M CSOH to a final volume of 250. 0 mL.
(CsOH = 149. 92 g/mol)
a) 0. 00800 M
b) 0. 0320 M
c) 1. 25 M
d) 0. 0160 M
e) 0. 160M
The concentration of solution is 0.0160M.
Option d) is correct
What is dilution equation?
When we dilute a solution by increasing the volume so as to decrease the molarity of the substance. By using this we can find the concentration.
M₁V₁=M₂V₂
M1 = initial molarity =0.200M
M2= Final molarity =M2
V1= Initial volume= 20mL
V2= Final volume = 250mL
Using this equation
0.200×20/1000 = M2×250/1000
⇒M2 = 0.400/ 25 = 0.0160M
For more information about dilution equation please visit:
https://brainly.com/question/29715909
#SPJ4
The combustion of ethylene proceeds by the reaction
C2H4(g) + 3O2(g) → 2CO2(g) + 2H2O(g)
When the rate of disappearance of O2 is 0.37 mol L-1 s-1, the rate of appearance of CO2 is ________ mol L-1s-1.
Thus, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹ , the rate of appearance of CO₂ is 0.2467 mol L⁻¹ s⁻¹
What is the rate of reaction?The rate at which a chemical reaction moves forward is known as the reaction rate in chemistry. It is frequently defined in terms of either the concentration of a reactant that is consumed in a unit of time or the concentration of a product that is generated in a unit of time (amount per unit volume).
The equation becomes:
C₂H₄(g) + 3O₂(g) → 2CO₂(g) + 2H₂O(g)
Rate of reaction = [tex]-\frac{d[C_2H_4]}{dt}[/tex] = [tex]-\frac{1}{3} \frac{d[O_2]}{dt}[/tex] = [tex]+\frac{1}{2} \frac{d[CO_2]}{dt}[/tex] = [tex]+\frac{1}{2} \frac{d[H_2O]}{dt}[/tex]
It is given that, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹.
So, [tex]-\frac{1}{3} \frac{d[O_2]}{dt} =[/tex] [tex]+\frac{1}{2} \frac{d[CO_2]}{dt}[/tex]
or, [tex]-\frac{1}{3} \frac{d[O_2]}{dt}[/tex] × (-0.37 mol L⁻¹ s⁻¹) = [tex]\frac{d[CO_2]}{dt}[/tex]
or, [tex]\frac{2}{3} \frac{d[O_2]}{dt}[/tex] × (0.37 mol L⁻¹ s⁻¹) = [tex]\frac{d[CO_2]}{dt}[/tex]
or, 0.2467 mol L⁻¹ s⁻¹ = [tex]\frac{d[CO_2]}{dt}[/tex]
Thus, the rate of disappearance of O₂ is 0.37 mol L⁻¹ s⁻¹ , the rate of appearance of CO₂ is 0.2467 mol L⁻¹ s⁻¹
To know more about rate of reaction refer to:
https://brainly.com/question/24795637
#SPJ1
the difference between the atomic number of an element and the element’s atomic mass is the number of:_____.
The difference between the atomic number and the mass number is atomic number is the total number of protons of an element, and atomic mass is the total number of neutrons and protons.
What are the atomic mass and number?The nuclear charge number of an element is its atomic number. The total number of protons in the element's atoms serves as a representation of it.
The mass number of an element is often referred to as its atomic mass number and nucleon number. The mass numbers are the sum of the protons and neutrons.
The mass in protons and neutrons of an atom is expressed as a mass number, also referred to as an atomic mass unit. The atomic mass is the sum of the masses of all isotopes of a certain kind.
As a result, the atomic number of an element represents the total number of protons present, whereas the total number of neutrons and protons is represented by the atomic mass
To learn more about the atomic number and atomic mass, refer to the link:
brainly.com/question/14190064
#SPJ4
The pace huttle orbiter utilize the oxidation of methyl hydrazine by dinitrogen tetroxide for propulion. 4 N2H3CH3(l) 5 N2O4(l) 12 H2O(g) 9 N2(g) 4 CO2(g)
Calculate ΔH° for thi reaction
The reaction's electron gain enthalopy is ΔH = -5591 kJ/ mol.(approximately)
What, using an example, is electron gain enthalpy?An illustration of electron gain enthalpy ,As a result, an element's second electron gain entropy is positive. For instance, energy is released whenever an electron is attached to a sulfur atom to create an S- ion, whereas energy is needed whenever an electron is attached to an S- ion to create an S2- ion.
Briefing:5N2O4 (l) + 4N2H3CH3 (l) ⇒ 12H2O (g) + 9N2 (g) + 4CO2 (g)
First, sketch the remaining product structures so that you can see the bonds. You ought to purchase the following:
H2O: H-O-H (pretend it's bent)
N2: N≡N
CO2: O=C=O
Step two is to research the average bond strengths of each component (reactants/productsbonds. )'s
Reactants:
N-N: 160 kJ/mol
N=O: 607 kJ/mol
N-O: 210 kJ/mol
N-H: 391 kJ/mol
C-N: 305 kJ/mol
C-H: 413 kJ/mol
Products:
O-H: 467 kJ/mol
N≡N: 941 kJ/mol
C=O: 799 kJ/mol (use the value with * since the bond is in CO2)
Step three is to count the quantity of each type of bond present in the reactants and products. The total bond strengths for every type of bond can then be determined by multiplying those values by the numbers in the balanced chemical equation above.
(For example, since the reactants include a total of nine N-N bonds—five from N2O4 and four from N2H3CH3—you multiply the covalent bond for N-N by nine, or nine times 160, to obtain a total of 1440 KJ/mol.)
Reactants:
N-N: 9*(160)= 1440 kJ/mol
N=O: 10*(607)= 6070 kJ/mol
N-O: 10*(210)= 2100 kJ/mol
N-H: 12*(391)= 4692 kJ/mol
C-N: 4*(305)= 1220 kJ/mol
C-H: 12*(413)= 4956 kJ/mol
Products:
O-H: 24*(467)= 11208 kJ/mol
N≡N: 9*(941)= 8469 kJ/mol
C=O: 8*(799)= 6392 kJ/mol
NOTE: In the balancing equation, I increased the binding energy for the two O-H bonds even by 12 H2O to get 24* for molecules like H2O. (467).
Add all the numbers for the reactants and the products respectively, in step four.
Reactants:
1440+6070+2100+4692+1220+4956= 20478 kJ/mol
Products:
11208+8469+6392= 26069 kJ/mol
In order to find ΔH in step five, remove the bond strengths for the product from the reactants.
ΔH= 20478 - 26069= -5591 kJ/ mol of rxn
To know more about electron gain enthalopy visit :
https://brainly.com/question/28391213
#SPJ4