Assume that wave B has a wavelength of 415 nm. Calculate the frequency of the wave. The value for c is 3.00 x 10 8 m/s. The wavelength of wave A is [__________]Hz.

Answers

Answer 1

The wave B has wavelength of 415 nm. The value for c is 3.00 x 10 8 m/s. The frequency is 7.22 x 10¹¹ Hz.

What is frequency?

Frequency is defined as the number of waves passing through a fixed point in a given amount of time.

The frequency can also be defined as a repeated event is the number of occurrences per unit of time.

Frequency can be expressed as

f = c / ∧

Where c = 3.00 x 10⁸ m/s

           ∧ = 415 nm

So, f = 3.00 x 10⁸ m/s x 415 nm

      f = 7.22 x 10¹¹ Hz.

Thus, the wave B has wavelength of 415 nm. The value for c is 3.00 x 10 8 m/s. The frequency is 7.22 x 10¹¹ Hz.

To learn more about frequency, refer to the link below:

https://brainly.com/question/5102661

#SPJ1


Related Questions

The nucleus of most atoms is composed of which of the following sub-atomic particles?

A. tightly packed protons.
B. tightly packed neutrons.
C. tightly packed protons and neutrons.
D. loosely connected protons and electrons.

Answers

Answer:

C. Tightly packed protons and neutrons

Explanation:

It consists of two sub-atomic particle namely proton and neutron.

This dense nucleus is responsible for most of the mass of atom.

Answer:

C. tightly packed protons and neutrons

Explanation:

The nucleus of an atom is made of protons and neutrons with electrons orbiting the nucleus.

why does a higher concentration make a reaction faster?

Answers

Answer:

Explanation: because more is always better

Which elements are present in all organic compounds? 1. Hydrogen and oxygen 2. Nitrogen and Carbon 3. Nitrogen and oxygen 4. Hydrogen and Carbon

Answers

Answer:

my answer is num:3 Hydrogen and oxygen.

Water, made of 1 oxygen atom bonded with 2 hydrogen atoms, is what

Answers

Answer:

It is a water molecule.

Explanation:

A water molecule consists of two atoms of hydrogen linked by covalent bonds to the same atom of oxygen. Atoms of oxygen are electronegative and attract the shared electrons in their covalent bonds.

Answer:

A water molecule is an example of a molecule created through covalent bonding. Water is made up of one oxygen atom and 2 hydrogen atoms, hence the chemical symbol H2O. A hydrogen atom is made up of 1 proton at its core and 1 electron that revolves around the core in a three-dimensional orbit.

Explanation:

What type of intermolecular bond may form between na and br

Answers

Answer:

Ionic

Explanation:

Na is a metal and Br is a non-metal. Makes an ionic bond. Hope that helps

What is the formula for Water?
Name full name element's name

Answers

Answer:

2 Hydrogen atoms and 1 Oxygen atoms makes water

Explanation:

Hope this helps^^

Answer: Its chemical formula H2O, indicates that each of its molecules contains one oxygen and two hydrogen atoms,

Explanation: i hopes it helps :)

What are the atoms of Fe(SCN)3

Answers

Answer:

55.845

Explanation:

yep

During chemical reactions__________are broken and___________to form
new substances with different properties, but mass is still_____________ .

Answers

Answer:

1st blank : Atoms

2nd blank : Reactants

I'm still trying to find the 3rd blank. I'll put it in comments if I find it

Explanation:

Hope this helps :)

Pls make brainliest :}

And have an amazing day <3

Explain why graphite conducts electricity.

Answer in terms of the structure and bonding in graphite.

Answers

Answer:

Diamond has a giant molecular structure. Each carbon atom is covalently bonded to four other carbon atoms. A lot of energy is needed to separate the atoms in diamond. This is because covalent bonds are strong, and diamond contains very many covalent bonds.

Graphite on the other hand has flat layers of carbon atoms held by weak van der Waal's forces which makes Graphite a weak object and easily breakable.

As graphite contains layers of carbon atoms. The layers slide over each other easily because there are only weak forces between them, making graphite slippery. These electrons can move through the graphite, carrying charge from place to place and allowing graphite to conduct electricity.One valence electron of each carbon atom remains free, Thus making graphite a good conductor of electricity. Whereas in diamond, they have no free mobile electron. Hence there won't be flow of electrons That is the reason behind diamond are bad conductor electricity.These electrons are free to move between the layers in graphite, so graphite can conduct electricity.The forces between the layers in graphite are weak. This means that the layers can slide over each other.

What is the speed of an object that travels 20 meters in 5

Answers

Answer:

5 what

Explanation:

not enough information

for the sn1 reaction, draw the major organic product, identify the nucleophile, substrate, and leaving group, and determine the rate limiting step.

Answers

C4H9OH is the substrate, Br- is the nucleophile and H2O is the leaving group.

In an SN1 reaction, the rate limiting step is the formation of the carbocation. The carbocation is formed as water which is the leaving group departs. After the leaving group departs, the nucleophile (Br-) attacks to yield the major organic product. The protonation of the -OH group  is the first step in the reaction.

It then follows that, C4H9OH is the substrate, Br- is the nucleophile and H2O is the leaving group.

Learn more: https://brainly.com/question/22824409

How many grams of Hydrogen (H) would need to react with 143 grams of Oxygen (O) to make 235 grams of Water (H20)? 235

Answers

Answer:

45 grams

Explanation:

Is it possible to have an electromagnetic wave with a wavelength (a) of 104.68 m and an energy of 3.25 x 10-27 J? Show your work.

Answers

2. You work for an environmental company as an environmental toxicologist and have been hired to determine the contaminant present in a local resident’s pool. Create a flow chart outlining how you would detect the possible presence of Fe2+ and/or Sr2+

What element is in period 4 and is in group 18

Answers

Answer:

Krypton is the element

Symbol: Kr

Please help me with chem, it would be very appreciated!
why it is necessary to draw a Lewis diagram before predicting the shape of a molecule

Answers

To determine the shapes of molecules, we must become acquainted with the Lewis electron dot structure. Although the Lewis theory does not determine the shapes of molecules, it is the first step in predicting shapes of molecules. The Lewis structure helps us identify the bond pairs and the lone pairs.

Please mark BRAINLIEST.

Name the following ionic compounds that contain transition metals. Use the periodic table provided
and a chart that lists the possible charges of transition metals, found here.
Cuci
copper(1) chloride
O
copper chloride
copper(ll) chloride
DONE

Answers

The correct name of the compound CuCl is copper I chloride.

An ionic compound is formed two atoms when one loose electrons and the other atoms gains those electrons. Ionic bonds are actually an ion pair, a pair of oppositely charged ions held together by electrostatic interaction. Transition metals are elements with incompletely filled d orbitals. Copper is a transition element.

The compound CuCl is named copper I chloride. We can see that the copper is in the +1 oxidation state in this compound hence the name.

Learn more: https://brainly.com/question/1527403

Answer:

copper(I) chloride

Explanation:

Edge 2021

Someone pls help me I will make you brain


Match them pls

Answers

Answer:

Explanation:

Carbon monoxide →  Prevents oxygen from being transported in the body

Nitrogen oxides → Can cause asthma

Particulate matter → Irritates lungs, dizziness, seizures, or death

Sulfur oxides → Inflammation and irritation of the respiratory system

I hope this helps!

An atom of radium (Ra) forms a monatomic ion.
Which ion does it most likely form?
a- Ra2-
b- Ra-
c- Ra2+
d- Ra+

Answers

Answer:

The atomic number of the element Radium (Ra) is 88. It is an alkaline earth metal. Electronic configuration of Radium (Ra) will be [Rn]7s^{2}[Rn]7s

2

It belongs to the group IIA of the periodic table. Alkaline earth metals that belong to the group IIA of the periodic table lose the valence electrons to form a +2 ion.

Therefore, Radium with an electronic configuration of [Rn]7s^{2}[Rn]7s

2

will lose the two 7s electrons to form the cation with +2 charge.

Examine the models shown above.where is potential energy the greatest

Answers

Answer:

A

Explanation:

Because it is the greatest

Hoàn thành phương trình sau. Và ghi rõ phản ứng ion: NaHCO33 + NaOH->

Answers

Answer:

hello

Explanation:

hello

PLEASE HELP!!
What kind of metal is Co?
Alkali Metal
Transition Metal
Alkaline Earth Metal

Answers

Answer:

I believe Cobalt is a Transition Metal.

Answer:

answer is transition metal

Someone pls help me I will make you brain

Answers

Answer:

i cant read it but its c and a

Explanation:

my thinking faces

What is the molecular mass of Br 2?

Answers

Answer:

159.808 g/mol

Answer:

159.80 g/mol

Explanation:

79.90×2=159.80g/mol

the positon of hydrogen is conversial in mendleevs perodic table give reason​

Answers

the position of hydrogen is controversial in periodic table because hydrogen is the only element with out neutron. it belongs to 1 st group but it is not placed there .

Answer:

the position of hydrogen is controversial in periodic table because hydrogen is the only element with out neutron. it belongs to 1 st group but it is not placed there .

Explanation:

in an oxidation-reduction reaction, how is the reducing agent changed?

Answers

Explanation: The additional terminology comes from the definition that, within redox processes, a reductant transfers electrons to an oxidant; hence, the reductant (reducing agent) loses electrons, so is oxidized, while the oxidant (oxidizing agent) gains electrons, so is reduced.

In an oxidation-reduction reaction, the reducing agent loses electrons and loses potential energy, Therefore, option (C) is correct.

What is a reducing agent?

A substance that loses its electrons in a redox reaction to other substances and gets oxidized is called a reducing agent. A reducing agent is one of the reactants which reduces the other reactant by donating the electrons to the reactant of an oxidation-reduction reaction.

If the reducing agent can't pass electrons to another reactant in a reaction, then the reduction process does not occur and the reaction cannot proceed.

In redox reactions, when an electron loses potential energy as a result of the transfer and energy is released. Electrons with more potential energy are associated with less electronegative atoms and less potential energy is associated with a more electronegative atom (such as O).

Therefore, the reducing agent loses electrons and loses potential energy in a redox reaction.

Learn more about reducing agent, here:

https://brainly.com/question/15584308

#SPJ2

Your question is incomplete, but probably the complete question was,

In an oxidation-reduction reaction, how is the reducing agent changed?

(A) it gains electrons and gains potential energy

B) it gains electrons and loses potential energy

C) it loses electrons and loses potential energy

D) it loses electrons and gains potential energy

what kind of reaction is happening when glaze is fired

Answers

Answer:

Oxidation and Reduction occurs

Explanation:

204,900,000,000
How many significant digits are found?

Answers

Answer:

4

Explanation:

There are 4 significant figures because when there is not a decimal, then only numerical values over 0 are counted. So the numbers counted in sig figs are 2049, and none of the other 0s.

So if it was 204,900,000,000.0, then it would have 12 significant figures.

what is the pattern of liquids and solids from the center of the earth out

Answers

Explanation:

I'm sorry if this doesn't answer this correctly but solid liquid solider solid liquid/solid

why does the total volume of water and alcohol decrease when the liquids were mixed together?

Answers

Answer: I think the alcohol molecules slip between the water molecules and take up that space, so you have less that you started with.

Explanation:

Pls help!!! for 100 points, please only answer if your actually going to help ! A kitten has a mass of 1582 g and accelerates at 1.7 m/s^2. What is the net force acting upon the kitten?
Write down all the givens from the problem.

Are all of the units in the form required to use the generic equation? If not, then show your conversion.

Write the generic equation (equation with variables only) for this problem. Do not add any spaces between letters or symbols.

Substitute your numbers into the generic equation. This is where you show your math work, step by step. Solve the problem

Enter the numeric portion (numbers only) of your answer here rounded to the nearest tenth.

Enter the numeric portion (numbers only) of your answer here rounded to the nearest tenth.

Answers

Answer:

2689.4

Explanation:

Other Questions
Give a situation in which an exchange using credit occurs. Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /.Moon Company produces baseball bats and cricket paddles. It has two departments that process all products Cutting Department and Finishing Department.In Finishing Department, direct materials (DM) are added at the start of the process and conversion costs (CC) are added evenly during the process. Company is using Weighted Average method for the Finishing Department.During July, beginning work in process in the Finishing Department was 80% complete as to conversion. Beginning inventories included $30,800 for transferred-in costs, $13,200 for direct materials, and $27,500 for conversion costs. Ending inventory was 30% complete as to CC. Additional information about the Finishing Department follows:FinishingBeginning work-in-process units26,400Units transferred in this period74,800Units completed & transferred out79,200Ending work-in-process units22,000Material costs added$37,400Conversion costs$75,460Transferred-in costs$141,240What is equivalent units for transferred-in cost, direct materials, and conversion cost, respectively? Separate with slash /. What is the image of the point (-9,-1) after a rotation of 270 counterclockwise about the origin? oliver sewed a quilt 3 2/3 feet long and 2 1/4 feet wide. what is the area of her quilt? Cual fue la Tecnologa que sali en el 2000 what is the function of allolactose in regulation of the lac operon? please tell me the answer a.1111+1011. b. 10111+11111 c. 1111*1011 d. 1110*1101 perform the binary calculations.pleaseeeeeee A team of deep-sea divers and biologists is exploring the open ocean. As team members dive downward from the surface, they observe significant changes to the ocean community at a depth of about 200 meters. What is the main cause of the changes at this depth?A. loss of brightness of the waterB. increasing salinity of the waterC. increasing temperature of the waterD. decreased oxygen concentration of water in word 2010, the document information panel has been moved to the ______. 2) How did the events on this time line affect US businesses?A) Profit sharing became a standard practice for industrial corporationsB) Monopolistic practices were abolished by federal legislationMass manufacturing techniques were adopted to maximize productionD) Retirement plans were guaranteed to factory workers How Do i get the correct answer for this? Evaluate 5x2 + 2(4x - 7) 8x for x = 3. Show your work. SOLVE THIS AND EXPLAIN STEP BY STEP PLEASE!!!! the cell cycle represents the coordinated sequence of events in the life Which description of government most supports John Lockes belief on the Social Contract Theory?governments must control people to secure peoples safetyrulers should have power over the governed as seen fit by godrights and responsibilities are a main duty of citizenshipstates exist to serve their people What is the name of the file manager in Microsoft Windows?The file manager used in Microsoft Windows is a few questions here sryyAn airplane travels at a speed of 582 miles per hour to reach its destination in 4 hours. Determine the duration of the flight, if the airplane travels at a speed of 388 miles per hour.(for the graph image)write an equation for the given graph T = d/14000d = T/1400014000 = T/dT = 14000/dT = 14000d DESPERATE FOR AN ANSWER, PLEASE HURRY; I WILL MARK BRAINLLIST FOR THE RIGHT ANSWER.What event sparked the War PLEASE. HELP. OML. (50 POINTS + BRAINIEST)WRITE THE NAME OF THE BODY SYSTEM THAT NEST FITS THE DESCRIPTION!!1.) Protects from water loss and outside environment2.) Major role in the hormone production 3.) Major role in gas exchange 4.) Excretes waste material and very important for homeostasis 5.) Provides active defense against pathogens6.) Involved in the mechanical and chemical breakdown of food7.) Allows for movement8.) Provides ability to reproduce 9.) Transports gases and nutrients 10.) Supports the body with structure11.) Coordinates involuntary and voluntary responses VIII. Choose the word which best fits each gap.Many people (1) _______ crafting with paper. The materials are readily available and dont cost much; and no super special talents is needed. Anyone (2) _______ be a paper crafter.There are many different paper craft techniques. Origami is one of ancient techniques developed in Japan where squares of paper are (3) _______ and formed into various objects such as flowers, animals, and boxes. Card (4) _______ is also a favourite paper craft technique. Birthday cards are the most popular greeting cards, followed by Christmas cards. Receiving a (5) _______ card is a special gift, because of the time and effort someone spent making it. It lets the recipient know just how much you care (8) _______ them.1. a. enjoy b. decide c. want d. learn2. a. must b. should c. can d.will3. a. wrapped b. folded c. torn d.taken4. a. making b. doing c. changing d. receiving5. a. handmake b. handmaking c. handmade d. making hand6. a. in b. on c. over d. about