an unknown element, x, reacts with oxygen to form two oxides with the general formula xo and x2o3. the pure element is paramagnetic, and the oxides are basic. which of the following elements could be represented by x?

Answers

Answer 1

The following elements could be represented by x as sb.

Elements are represented by their chemical symbols sometimes with atomic and mass numbers, as shown below. The mass number is the sum of the number of neutrons and protons in the nucleus. Scientists have standardized a simple way to represent elements with their chemical symbols.

One of the main reasons for development is that using letters is the easiest way to represent elements. Another reason to use chemical symbols is that they make it easier to write chemical formulas. The periodic table is a tabular arrangement of the chemical elements from hydrogen which has the lowest atomic number to oganesson which has the highest atomic number. The atomic number of an element is the number of protons in the nucleus of that element.

Learn more about An unknown element here:-https://brainly.com/question/27753952

#SPJ4


Related Questions

Write net ionic equations for the reaction that occurs when aqueous solutions of ammonium sulfate,
(NH4)2SO4, and barium nitrate, Ba(NO3)2 react to form a white precipitate.

Answers

(NH4)2SO4 + Ba(NO3)2 → BaSO4 + 2NH4NO3 is  net ionic balanced equations for the reaction that occurs

To balance chemical equations, stoichiometric coefficients for the reactants and products are required. This is important because a chemical equation must follow the rules of conservation of mass and constant proportions, which dictate that the same number of atoms of each element must be avail on two of the reactant and product sides of the equation.

Chemical equations use the relevant chemical formulae to symbolically express the reactants and products of a chemical process. To the left of the sign "," and to the right of the arrow symbol, respectively, is the part of the chemical equation that is on the reactant side.

To know more about  balance equation visit : brainly.com/question/28949107

#SPJ1

g a certain diatomic molecule absorbs energy by rotating. the first excited rotational state is at an energy of 0.10 ev above the ground state. what is the energy of the second excited rotational state above the ground state

Answers

0.30 ev is the energy of the second excited rotational state above the ground state .

What is energy ?

In physical, energy are quantitative properties given to a body or physical system, perceivable in the form of work performance and heat and light. Energy is Conserved - The law of conservation of energy states that energy can be transformed into form, but cannot be created or destroyed. The unit of measure for energy in the International System of Units (SI) is the joule (J).

Common forms of energy include the kinetic energy of a moving object, the potential energy stored by an object (due to its position in the field, etc.), the elastic energy stored by a fixed object, chemical energy, the energy associated with a chemical reaction, Includes radiation. is the energy transported by electromagnetic radiation and is the internal energy involved in a thermodynamic system. All living things absorb and emit energy all the time. Due to the equivalence of mass and energy, an object that has mass when it is at rest (called rest mass) has an equivalent amount of energy with a shape called rest energy plus an additional amount given to the object above that rest energy. It also has energy (in any form). Increases the object's total mass and increases its total energy.

To learn more about energy , click the link below ;

https://brainly.com/question/13881533

#SPJ4

A 20.0-gram cube of ice at 0.00°C is dropped into a calorimeter containing 120.
grams of water at 35.0°C. The ice eventually melted, and the water reached an
equilibrium temperature of 18.1°C. Based on this data, what is the heat of fusion, in
joules per gram, of water?

Answers

The heat of fusion for water is 79.7 J/g. This can be determined by using the specific heat capacity of water and solving for the heat of fusion.

What is fusion?
Fusion
is the process of two atoms coming together to form a heavier atom, including when two hydrogen atoms combine to form a single helium atom. The sun is powered by this process, which produces vast amounts of energy—many times more than fission. Additionally, no radioactive fission products are produced. The extreme temperature and pressure needed to fuse the nuclei together are being studied by scientists, but they are difficult to sustain for long periods of time.

To learn more about fusion
https://brainly.com/question/114533
#SPJ1

How do you think global terrorim affected Ilam a a religion in the eye of the world?

Answers

Many factors make it extremely difficult to analyze patterns in terrorism. Simply said, there is a severe paucity of comparable and trustworthy data, and there is a tendency to compartmentalize analyses to address specific threats, countries, and regions. When the analysis tries to address topics as sensitive as the connections between Islam and terrorism, the issue becomes even worse.

How Islam is affected as a religion by the global terrorism?

Nearly all of the governments of the engaged nations are actively battling  terrorism, and the majority are allies of Western nations who collaborate closely with the security, armed forces, and anti-terrorist organizations of non-Muslim nations.

Muslims around the world differ greatly not just in terms of their religious beliefs but also in terms of their political and societal philosophies, including how they perceive the government, the law, and human rights; what they believe should be taught in schools; and whether or not they are violent.

Thus, global terrorism has affected the Islam as a religion in the eye of world.

To know more about Islam and terrorism, visit:

https://brainly.com/question/28828792

#SPJ4

Given the unbalanced equation:
_MnO₂ + _HCI → _MnCl₂ + _H₂O + _Cl₂
When the equation is balanced using the smallest
whole number coefficients, the coefficient of HCI is

Answers

Answer:

4

Explanation:

Having the coefficient 4 in front of HCl and the coefficient 2 in front of H₂O balances out the equation.

If the pressure of a gas is tripled and the absolute temperature of the gas is quadrupled, by what factor will the volume of the gas change?.

Answers

If the pressure of a gas is tripled and the absolute temperature of the gas is quadrupled then volume of the gas change is 4/3

Volume is the space occupied within the boundaries of an object in three dimensional space

Here the relationship between pressure volume and temprature can be expressed as

PV/T

And then

P₁V₁/T₁ = P₂V₂/T₂

So in this case P₁V₁T₁ are equal to 1 and have the pressure triple so that P₂ = 3 and the temprature quadrupled so that T₂ = 4 and then we have to calculate V₂ = ?

(1)(1)/1 = (3)V₂  /4

1 = 3/4 V₂

1(4/3) = (3/4) V₂ 4/3

V₂ = 4/3

Know more about volume

https://brainly.com/question/29411579

#SPJ4

statement about a global environmental indicator is not correct? concentrations of atmospheric carbon dioxide has steadily increased since the industrial revolution world grain production has steadily increased since the 1950s, but worldwide

Answers

The statement which is not correct about global environment indicator is that global grain production has grown continuously since 1950, but grain production per person has fallen sharply over that time.

What is the explanation for this statement?

Global grain output has increased since 1950 as a result of enhanced irrigation, fertilization, new variety of crops, and other advancements. Global grain production has dropped, but, per person. The increase in the human population is to blame for this. The distribution of enough food per capita declines as the amount of habitats rises.

Therefore, despite a reasonably consistent increase in global grain production since 1950, grain production per person has fallen sharply throughout that time. However, this does not indicate the global environment as do the other options.

To know more about global environment, visit:

https://brainly.com/question/15116815

#SPJ4

The complete question is:

Which statement regarding a global environmental indicator is NOT correct? (a) Concentrations of atmospheric carbon dioxide have been rising quite steadily since the Industrial Revolution. (b) World grain production has increased fairly steadily since 1950, but worldwide production of grain per capita has decreased dramatically over the same period. (c) For the past 130 years, average global surface temperatures have shown an overall increase that seems likely to continue. (d) World population is expected to be between 8 billion and 10 billion by 2050.

dot and cross diagram for lithium chloride

Answers

Lithium becomes Li+ by losing 1 electron and chlorine becomes Cl− by accepting electrons. Therefore it ionic compound, LiCl is formed.

What is the dot and cross diagram for lithium chloride?

Lithium belongs to Group 1 of the periodic table which means that Lithium has one electron in its valence shell and this electron is located in the 2s orbital. The single electron is represented as dot around the Lithium symbol.

The ionic bond formation of lithium chloride involves transfer of electrons from lithium to chlorine and forming, Li+ and Cl− in LiCl.

A bond between metal and nonmetal is said to be ionic in nature or is said that it has high ionic character. Therefore, we can say that  LiCl bond is an ionic bond.

To know more about lithium chloride, refer

https://brainly.com/question/20023519

#SPJ1

Please classify the following equation: Na₂O + H₂O → 2NaOH
combustion
double replacement
single replacement
synthesis
decomposition

Answers

Answer:

Explanation:

Synthesis

The half-life of radium-226 is 1590 years. If a sample contains 100 mg, how many mg will remain after 2000 years?.

Answers

41.788 mg of sample contains 100 mg, remains after 2000 years when the half-life of radium-226 is 1590 years.

Radium is a radioactive element. All radioactive elements are first order reactions with half-life constants.

For first-order reactions, the half-life is inversely proportional to the rate constant. The formula is:

for first-order reaction

[tex]t_{1/2} = \frac{ln2}{k} \\k = \frac{ln2}{t_{1/2}} \\\\k= \frac{0.693}{1590} \\\\\\k= 0.000436 years[/tex]

Radioactive decay period is:

t = 2.303 × log(a/a-x)/k

Where,

t ⇒ Decay time of radioactive element.

a ⇒ initial amount

a-x ⇒ remainder after t time

k ⇒ rate constant

put the value in formula

t = 2.303 × log(a/a-x)/k

2000 = 2.303 * log(100 / a-x) / 0.000436, so,

log(100 / a-x) = 2000 * 0.000436 / 2.303

                   =0.379

100 / a - x = log 0.379

100/a-x=2.393

a - x = 100 / 2.393

a - x = 41.788 mg

So after 2000 years,  41.788 mg of radium-226 will remain

Read more about half-life: Brainly.com/question/984564

#SPJ4

three students are asked to discuss why some molecules move further than others do on a chromatogram in the same amount of time. which student employs correct scientific reasoning?

Answers

Student 1 states that the molecules that are larger in size and are more attracted to the solvent will move further along the TLC plate employing the correct specific reasoning.

Why do some substances move further up the TLC plate than others?

Larger molecules take longer to move up the chromatography paper or TLC plate, whereas smaller molecules are more mobile. Likewise, the polarity of the molecules can affect how far the spots travel, depending on the type of solvent used.

What factor determines which molecules travel further in chromatography?

The stronger a compound is bound to the adsorbent, the slower it moves up the TLC plate. Non-polar compounds move up the plate most rapidly (higher Rf value), whereas polar substances travel up the TLC plate slowly or not at all (lower Rf value).

Thus, the molecules larger in size are more attracted to solvent will move further along the TLC plate is the reason why molecules move further than others in a chromatogram. So, student 1 is the correct option.

To know more about chromatogram :

https://brainly.com/question/1394204

#SPJ4

Place the following compounds in order of increasing magnitude of lattice energy. Al2o3 cao kf mgo.

Answers

The compounds in order of increasing magnitude of lattice energy are KF < CaO < MgO < Al2O3.

What is the lattice energy?

When ions in the gаseous phаse form а solid ionic compound, it releаses energy which defines the bond strength of thаt ionic compound. This strength, which cаn be estimаted using the Born-Hаber cycle, is cаlled the lаttice energy. Generаlly, it is influenced by fаctors such аs the rаdius аnd the chаrge of the ions, аnd it helps chаrаcterize the properties of the compound such аs its hаrdness, volаtility, аnd solubility.

Lattice energy is determined by the charge on the atoms making up the lattice and by the atomic radii of those atoms.

KF has 808 kJ/Mol of lattice energyCaO has 3414 kJ/Mol of lattice energyMgO has 3795 kJ/Mol of lattice energyAl2O3 has 14.780 kJ/Mol of lattice energy

Thus, in order of increasing lattice energy, we have KF < CaO < MgO < Al2O3.

For more information about lattice energy refer to the link:

https://brainly.com/question/18222315

#SPJ4

The acceleration of a runner is 12 m/s². The force exerted on the starting
blocks is 700 N. What is the mass of the runner?
10

Answers

Force = mass * acceleration
700 = mass * 12
Mass = 700/12
= 58.33 kg

heat is . heat is . the capacity to do work the result of a force acting through a distance the flow of energy caused by a chemical reaction a chemical reaction the flow of energy caused by a temperature difference

Answers

Heat is the flow of energy caused by a temperature difference

Heat is the energy that is transferred from one body to another as the result of a difference in temprature and if two bodies at different temprature are brought together energy is transferred that is heat flow from the hotter body to the colder and heat is the transfer of thermal energy caused by a differences in temprature and this temprature difference  is also called a temprature gradient and since heat is a movement of energy and it is measured in the same unit as energy in the joules

Know more about heat

https://brainly.com/question/2515879

#SPJ1

since you know its not a chemical change, why do you think the color change occured when you heated the plated penny in part 2.

Answers

The penny must have changed its color because an oxidation reaction. When we heat some metals, the trnasform into oxides, for exxample Zinc oxide ZnO or CuO.

Moreover, his compounds are colored molecules mostly brown or black colored compounds. First at all when we put the pennies into a acetic acid solution, a redox reaction wiil happen. The acetate is an oxidant  and it will react with the Cu, Zn and Sn to reduce them. for example, if we have ZnSO4 in the plate and it will be heated, the Zn will suffer a redox reaction and will form Zn0. a metalic form. that´s why the color changes.

You can learn more about this at:

https://brainly.com/question/13293425#SPJ4

What mass of glucose (c6h12o6) should be dissolved in 10.0 kg of water to obtain a solution with a freezing point of -4.2 ∘c ?

Answers

The mass of glucose required here is  4068 grams, we get this freezing point depression.

Freezing point depression generally refers to the lowering of the freezing point of solvent upon the addition of solutes.

It is a colligative property of the solutions that is generally proportional to the molality of solute that is added. The depression in the freezing point of a solution can be described by the following formula;

Δ[tex]T_{f}[/tex] = [tex]K_{f}[/tex] × molality × i

4.2[tex]^{o}C[/tex] = 1.86 × m × 1

m = 2.26

molality = moles of solute

                mass of solvent

2.26m = mole of solute

                10.0Kg

mole of solute = 22.6mol

mole of glucose = mass of glucose

                              molar mass

22.6 = mass of glucose  

                180

Mass of glucose = 22.6 × 180

Mass of glucose = 4068 grams

To know more about  freezing point depression.

https://brainly.com/question/12844810

#SPJ4

An atom of which element has the strongest attraction for the electrons in a bond?.

Answers

An atom of Fluorine  element has the strongest attraction for the electrons in a bond.

One of the most important properties of electrons is their mutual Coulomb repulsion. As electrons are negatively charged species we know that they will be attracted to the nucleus. We know that these electrons moved in their fixed energy levels called as the orvbitals ,which in turn decides the size of an atom as well.

In the periodic table as we move from left to right in the periodic table we see that the even though the number of electrons are increasing, but the size of the atoms will decrease. This happens because for each atom when the upcoming electrons are added they get added to the same shell . Due to this the nucleus will attract these electrons towards itself.

This is the main reason why from left to right in the periodic table the size of the atoms decreases, so it means smaller the size greater will the attraction faced by the electrons . Since Fluorine is the element present on the right most corner of the periodic table, it has the strongest attraction faced due to its smaller size.

To know more about electrons

https://brainly.com/question/1255220

#SPJ4

In the process of carbon fixation, rubp attaches a co2 to produce a 6 carbon molecule, which is then split in two. After phosphorylation and reduction, what more needs to happen in the calvin cycle?.

Answers

The Calvin cycle is the regeneration of RuBP.

For the technology of one carbon dioxide molecule from the pathway, six carbon molecules are required, so six turns of the cycle are required for the regeneration of 1 molecule of RuBP one ATP is required and for the technology of six molecules of RuBP, six ATP molecules are required. A G3P molecule carries three constant carbon atoms so it takes two G3Ps to construct a six-carbon glucose molecule.  

Due to the fact the carbohydrate molecule has six carbon atoms, it takes six turns of the Calvin cycle to make one carbohydrate molecule. Six turns of the Calvin cycle are required to generate one mole of glucose. A molecule of glucose is made up of six carbon molecules. consequently, six turns will be required for the synthesis of 1 molecule of glucose by way of the Calvin cycle.

Learn more about The Calvin cycle here:-https://brainly.com/question/920840

#SPJ4

What mass of calcium hydroxide is formed when 10g of calcium oxide reacts with 10g of water.

Answers

Mass of calcium hydroxide is formed when 10g of calcium oxide reacts with 10g of water is 13.024 gram

Mass is a measure of the amount of matter in a substance or an object.

Here given data is

Calcium oxide =  10g

Water = 10g

We have to calculate mass of calcium hydroxide = ?

The reaction is

CaO + H₂O → Ca(OH)₂

1 mole of CaO reacted with 1 mole of H₂O to form 1 mole of Ca(OH)₂

Moles = mass/molar mass

Mole of CaO = 10g/56g/mol = 0.179 mole

Mole of H₂O = 10g/18g/mol = 0.556 mole

CaO is the limiting reagent therefore by using of mole ratio of CaO : Ca(OH)₂ is 1 : 1 mole of Ca(OH)₂ = 0.179 mole

Mass = mole × molar mass

Mass = 0.176 × 74g/mol

Mass = 13.024 gram

Know more about calcium hydroxide

https://brainly.com/question/17552267

#SPJ4

the lowest-energy distribution of electrons in the sublevels for an atom of a particular element is called the

Answers

The lowest-energy distribution of electrons in the sublevels for an atom of a particular element is called the ground state.

When an atom, molecule, or ion and its electrons are at their lowest potential energy level, they are said to be in the ground state. They are said to be thrilled if their energy level is higher. Excited electrons are those with energies greater than their ground state. When many quantum mechanical states are present at the same energy, these levels are known as degenerate energy levels.

An electron orbit around an atom's nucleus is referred to as an electron shell or energy level in chemistry. This atomic model by Bohr states that the electrons follow a circular path around the nucleus known as an orbit.

The "K shell" is the shell that is closest to the nucleus; it is followed by the "L shell," the "M shell," and so forth as one moves farther from the nucleus. Quantum numbers (n = 1, 2, 3, 4, etc.) or alphabets (K, L, M,...) can be used to represent the shells.

Learn more about ground state here:

https://brainly.com/question/1314094

#SPJ4

97.19 ml of 1.527 m sodium chloride (aq) is added to 111.84 ml of 1.923 m silver sulfate (ag2so4). after the reaction is complete, what is the mass of precipitate that has formed?

Answers

61.62 g of precipitate of AgCl is formed after the reaction is complete

As we know the formula :

M = n / V

where

M = Molarity

n= no of moles

V = volume ( in litres)

Concentration of NaCl = 1.527 M = 1.527 mol/L

Volume of NaCl solution = 97.19 ml = 97.19 /1000

= 0.09719 L

Number of moles of NaCl

= 1.527 mol/L × 0.09719 L

= 0.148 mol

Concentration of Ag2SO4 = 1.923M = 1.923 mol/L

Volume of Ag2SO4 solution = 111.84 ml = 111.84/1000

= 0.11184 L

Number of moles of Ag2SO4

= 1.923 mol/L × 0.11184 L

= 0.215 mol

Balanced equation:

Ag2SO4 (aq) + 2 NaCl (aq) -->2 AgCl (s) [precipitate] + Na2SO4 (aq)

1 mol of Ag2SO4 reacts with 2 moles of NaCl produces 2 moles of AgCl,

then 0.215 mols of Ag2SO4 will react with 2 × 0.215 moles = 0.43 moles of NaCl will produce 0.43 moles of AgCl

Molar mass of AgCl = 143.32 g/mol

Mass of precipitate formed = no of moles× molar mass

= 0.43 mol × 143.32 g/mol = 61.62 g

learn more about Molarity at https://brainly.com/question/24305514

#SPJ4

predict the product(s) and provide a fully balanced chemical equation for each of the following hydrogenation reactions:

Answers

The product of the fully balanced chemical equation is single bond compound.

Hydrogenation reactions include the reaction of hydrogen and nitrogen to form product depending on the choice of catalyst.

Hydrogenation is a chemical reaction that provides hydrogen to a molecule. Hydrogenation is not thermodynamically favorable at regular temperatures, so a catalyst is needed. Normally this catalyst is a metal. Examples of hydrogenated products consist of margarine, mineral turpentine, and aniline.

An example of an alkene addition response is a technique called hydrogenation. In a hydrogenation reaction, two hydrogen atoms are brought across the double bond of an alkene, ensuing in a saturated alkane.

Hydrogenation is used to solidify, preserve or purify many products, raw materials, or ingredients. Ammonia, fuels (hydrocarbons), alcohols, pharmaceuticals, margarine, polyols, numerous polymers and chemicals are products dealt with using a hydrogenation manner.

Learn more about Hydrogenation reactions here:- https://brainly.com/question/12833896

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete uestion.

predict the product(s) and provide a fully balanced chemical equation for each of the following hydrogenation reactions:

When determining the mass of an atom, the electrons are not considered. Why can scientists disregard the electrons?.

Answers

When determining the mass of an atom, scientists disregard electrons is because they are 2000 times smaller than protons and neutrons. They are meaningless in terms of mass.

What is atomic mass?

The ideal definition of atomic mass is 1/12 of the mass of a carbon-12 atom in its ground state. The total mass of protons and neutrons, which is almost equal to the atomic mass, can be used to account for the mass of an atom. The loss of binding energy mass is what caused this minor alteration.

1 amu = 1.66 ×10−24 g

When divided by unified atomic weight or Daltons, the atomic weight of an atom is a dimensionless number.

Compared to the masses of the proton and neutron, which both have 1.67 10^-27 mass, the electron has a mass of 9.1 10^-31. since electrons are much smaller and have far less mass than a nucleus. This allows for the ignoring of the electron mass.

Another explanation is that, in order to achieve stability, an electron of any element may be transferred from one orbital of any one element to another orbital of any other element during the production of any compound. As such we do not factor the mass of the electron into atomic mass for this reason.

Another explanation for why the mass of any atom is unaffected by the electron is that electrons are always in motion. Since electrons move around the nucleus at an extremely fast rate—even faster than the speed of light—causing their mass to be turned into energy. According to a quantum physics hypothesis, when an item travels at square of the speed of light, it loses mass, turns into energy, and is no longer affected by gravity.

To learn more about atomic mass from the given link

https://brainly.com/question/3187640

#SPJ4

was the experimental mole ratio exactly the same as the theoretical mole ratio? if not, give some possible reasons.

Answers

No, the experimental mole ratio is exactly the same as the theoretical mole ratio.

A mole ratio is a ratio among the amounts in moles of any compounds worried in a balanced chemical reaction. The stability chemical equation affords a comparison of the ratios of the molecules necessary to finish the response.

The mole ratio is the proportion of the theoretical mole ratio, of moles of any two chemical entities concerned in a compound or a chemical reaction. studying the mole ratio is crucial to calculate the reaction yield, determining the stoichiometry, and screening the response kinetics.

The ratio of moles of 1 substance to the moles of another substance in a balanced equation. To decide the mole ratio between  materials, all you want to do is examine the balanced equation for the coefficients in the front of the materials you are interested in

Learn more about mole ratio here:-https://brainly.com/question/19099163

#SPJ4

Throughout history, scientists have been known to copy ideas from their peers. Dmitry Mendeleev was no exception—he arranged all of the elements known at the time according to their atomic masses, just as Johann Döbereiner and John Newlands did before him. However, Mendeleev intentionally left blank spaces in his working version of the periodic table of elements.

Which statement best explains the importance of the blank spaces in Mendeleev’s version of the periodic table of elements?

Answers

The statement which best explains the importance of the blank spaces in Mendeleev’s version of the periodic table of elements is that they predicted the existence of elements that had not yet been discovered.

What is Periodic table?

This is referred to as the tabular arrangement of elements into groups and periods based on their common properties and features. There are 18 groups and seven periods in which elements are grouped under.

Mendeleev intentionally left blank spaces in his working version of the periodic table of elements because he predicted the existence of elements that had not yet been discovered.

Read more about Periodic table here https://brainly.com/question/1173237

#SPJ1

what is the anion name for telluric acid

Answers

The anion name for telluric acid is TeO₃²⁻ is tellurite ion

Anion are ion that are negatively charged and ion are charged atom or molecule and if a balanced atom loses one or more electron and it will become positively charged cation and if balanced atom gain one or more electron it will become  negatively charged anion and in the telluric acid means H₆O₆Te and the anion are formed TeO₃²⁻ is called as tellurite ion and telluric acid as tellurium source in the synthesis of oxidation catalyst

Know more about telluric acid

https://brainly.com/question/28627841

#SPJ1

how many grams of solute are needed to order to prepare 100.00 ml of a 0.1000 m solution of a compound with a molecular weight of 350.0 g/mol? report your answer in grams, but do not include units in your answer.

Answers

Molecular Weight - The grams of solute that are needed is 3.5 g.

What is molecular weight?

The mass of the a given molecule is its molecular mass (m), which is expressed in daltons. Because they contain various isotopes of an element, different molecules of same compound can have distinct molecular masses. According to IUPAC, the related quantity comparative molecular weight is a unitless comparison between the mass of a molecule and the truly united atomic mass unit (also called the dalton).

GIVEN:

c =  Molarity = 0.1 M

M = Molar mass = 350 g/mol

V = Volume of solution = 100 mL = 0.1 L

n = Number of moles

m = Mass of solute

C = n/v

n =0.01 moles

M=m/n

m= 3.5g

To learn more about molecular weight from the given link:

https://brainly.com/question/14596840
#SPJ4

What gets emitted when an electron relaxes from an excited state to the ground state?.

Answers

Answer: Photon

Explanation:

The electron can reach its ground state level either with one direct jump or with shorter jumps via intermediate levels. If an excited electron emits a photon, the energy hf of that photon equals the energy difference between the initial energy level of the electron and a lower level.

What is the concentration of a 600 mL solution that contains 250 grams of iron (II) chloride?

Answers

The molar concentration of a 600 mL solution that contains 250 grams of iron (II) chloride would be 3.28 M.

What is concentration?

The concentration of a solution is the amount of solute present in the solution relative to the volume of the solution. The concentration of solutions can be expressed in different forms. These include:

Molar concentrationMass concentration

The molar concentration of a solution refers to the number of moles of solutes per liter of the solution. The mass concentration, on the other hand, refers to the mass of solutes in a solution per liter of the solution.

In this case, we want to find the molar concentration of the iron (II) chloride solution.

The molar mass of the compound is 126.75 g/mol.

Recall that: mole = mass/molar mass

Mole of 250 grams iron (II) chloride = 250/126.75

                                                           = 1.97 moles

Volume of the solution = 600 mL

                                       = 600/1000 liter

                                        = 0.60 liter

Molar concentration of the solution = 1.97/0.60

                                                           = 3.28 mol/liter

In other words, the concentration of the solution is 3.28 M.

More on molar concentrations can be found here: https://brainly.com/question/15532279

#SPJ1

When preparing a solution in a cuvette, make sure to handle the cuvette by the choose. And avoid touching the choose. . Then, choose. The cuvette before placing it in the spectrophotometer.

Answers

When preparing solutions in cuvettes, handle the cuvettes by the rough side and avoid touching the smooth side. Wipe the cuvette before inserting it into the spectrophotometer.

The cuvette is made of silica quartz. Therefore, care should be taken before using cuvettes. Always wear powder-free gloves when handling cuvettes. Fingerprints are the most common cause of cuvette malfunction and unreliable readings. The cuvette should always be held at the top of the cuvette to avoid damaging the bottom of the cuvette where the light enters.

For more information on cuvettes, please refer to the following link.

Brainly.com/question/29384808

#SPJ4

Other Questions
Now that you have converted a terminating decimal number into a fraction, try converting a repeating decimal number into a fraction. Repeating decimal numbers are more difficult to convert into fractions. The first step is to assign the given decimal number to be equal to a variable x, For the decimal number 0.3 that means x=0.3 if x=0.3 what does 10x equal? if 2.00L of a 0.032M Li2O solution has the water evaporates, what mass of Li2O would remain Mary borrowed $12,000.00 for starting a bakery shop at $11.5% per year at simple interest. What is the amount of money that she yas to pay at the end of 3 yesrs to clear her debt ? The amount of chlorine needed to treat a wimming pool i directly proportional to the volume of the pool steve and stacey have been a couple for 30 years. their love is characterized by warm feelings and deep affection for each other. they enjoy spending time together and describe themselves as sometimes lovers and always best friends. psychologists would say that steve and stacey's love is best described as What did the king krum call the royal math and science teacher in general, what position has the supreme court taken on the government's right to compel reporters to divulge information concerning the commission of a crime? what is the responsibility the children have to each other ? the man in the well the nurse is preparing to administer an intramuscular injection of vitamin k to a newborn. the nurse will ensure the amount per injection is within which range? In no less than 75 words, explain how one can say that Homer treats his audience and readers with hospitality when he uses repetition in his text. Use an example from the story to establish your point. After one year of operation, jake and rolando learned that several top athletes were driving to a larger town to receive similar services. In order to learn about the potential customers who were going elsewhere for service, jake and rolando proceeded to look online to determine how competitors services differed from theirs. They learned that competitors were open longer hours on weekends and even had celebrity endorsements. The new information they gathered and its interpretation was the __________ part of the marketing research process. A Mazda traveled 326 miles in 7 hours and a Ford Explorer traveled 230 miles in 5hours. Which car was traveling faster? Justify your work. What was Tecumseh's role in the War of 1812? I need to write a 2 page essay on Negative liberty. Can anyone help? I dont know were to start 9. If XYZ LMN, what is the length of XZ? The pharmacists milkweed concoction didnt work. It only gave the queen split ends. However, the queen, in a rare kind hearted moment, agreed to let the pharmacist try again. This time he has decided to combine a mixture 50% sorghum with a mixture containing 75% sorghum to create a 10 ounce mixture containing 60% sorghum. How many ounces of the 50% mixture should the pharmacist use? What was the roosevelt corollary. To qualify to compete in the high jump finals, athletes must jump a certain height in thesemi-finals. Jon jumped 1 inches below the qualifying height, but his friend Anthonymade it to 2 inches above the qualifying height. How much lower was Jon's semi-finaljump compared with Anthony's? a(n) __________ is something that is a valuable but burdensome possession. For each of the six plots, identify the strength of the relationship (e.g. weak, moderate, or strong) in the data and whether fitting a linear model would be reasonable. a. strong relationship, a linear model would NOT be reasonable b. strong relationship, a linear model would NOT be reasonable c. strong relationship, a linear model would be reasonable d. weak relationship, a linear model would be reasonable e. weak relationship, a linear model would NOT be reasonablelX f. moderate relationship, a linear model would be reasonable