An elevator is moving upward with a speed of 9.2 m/s. 3.8 seconds later, the elevator is still moving upward, but its speed has increased to 15.8 m/s. What is the average acceleration, in m/s2, of the elevator during the 3.8-s interval? Please round your answer to one decimal place.

The changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

The term conservation of energy means that energy can not be created nor destroyed.

In this case, the changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

Learn more about conservation of energy:https://brainly.com/question/2137260

#SPJ1

An increase in the concentration of sugar in a solution leads to the increase in boiling point of the solution.

Boiling point of a solution is that pressure exerted on a liquid by its surrounding is equal to the vapour pressure of the liquid.

When there is an increase in concentration of solute, more space will be occupied in the fluid leading to an increase in the boiling point of the fluid.

Therefore, An increase in the concentration of sugar in a solution leads to the increase in boiling point of the solution.

Learn more about boiling point here:

https://brainly.com/question/40140

#SPJ1

The resultant force of both forces is 15.62 N.

The Resultant of forces is a single force obtained when two or more forces are combined.

To calculate the resultant of the force, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the resultant force of both forces is 15.62 N.

Learn more about resultant force here: https://brainly.com/question/25239010

#SPJ1

Using the parallelogram law of vectors to obtain the resultant, we have the value 16 N.

The resultant force is that force that has the same effect in magnitude and direction as two forces acting together. In this case, we have two forces , 8 N and 10 N inclined at an angle of 120 degrees

Using the parallelogram law of vectors to obtain the resultant;

R = √([8²+10²)-2×8×10cos120°]

R = √164 +80

R = 16 N

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

Answer:

In light waves, the electromagnetic fields oscillate perpendicular to the direction of propagation. Hence, sound waves are longitudinal waves whereas light waves are transverse waves.

The current density of the copper wire is determined as (7.059 x 10⁸ A/m²)/L

The current density of the copper wire is calculated as follows;

J =1/ρ(E) = 1/ρ(V/L)

where;

J =1/ρ(E) = 1/ρ(V/L)

J = (1/1.7 x 10⁻⁸) x (12)/L

J = (7.059 x 10⁸ A/m²)/L

Learn more about current here: https://brainly.com/question/24858512

#SPJ1

The average speed traveled by car is [tex]35m/s[/tex].

[tex]1^{st}[/tex] case

       Distance [tex]=[/tex] [tex]speed*time= 50*20=1000m[/tex]

[tex]2^{nd}[/tex] case

       Distance[tex]=30*30=900m[/tex]

[tex]3^{rd}[/tex] case

       Distance[tex]=20*10=200m[/tex]

Now, The total distance[tex]=(1000+900+200)m=2100m[/tex]

        Total time[tex]=(20+30+10)s=60s[/tex]

       Average distance [tex]=\frac{total distance}{total time} = \frac{2100}{60}=35m/s[/tex]

To learn more about Average speed, refer to:

Answer:

Electron groups could be considered as  Lone pair electrons and bonded pairs of electrons.

Answer: Option D & B

Explanation:

The two or more electrons can be bonded by single bond, double bond, covalent bond of electrons can simply be lone pair of electrons. Unshared pair of electrons are generally termed as lone pair of electrons in an atom which are generally present in the outermost shell of atoms. Hence electron groups can be determined by bonded pairs and lone pairs of electrons.

I got this from another brainly user

Answer:last choice is correct. Work is equally to force times distance

Explanation:to generalize, W is equal to to force as a function of distance integrated over distance. Work is equivilent to energy. See work/force equivalency

Answer:

see below

Explanation:

OK....here is one :

  L    W    H

 10 x 10 x 10  cm   =   1000 cm^2     this is a cube

    the container will hold the volume  of  1000 cm^3  of water

       which will have a mass  1 kg    ( this is a liter)

One parameter of the system that is held constant that can be considered is the mass of the water.

In science, the constant is a type of unmodified variable that remains equal along with the experimental procedure.

The constants of a particular system must be considered and they cannot change in experiments or observations.

In conclusion, one parameter of the system that is held constant that can be considered is the mass of the water.

Learn more about the constant of the system here:

https://brainly.com/question/17367653

#SPJ1

Answer:

26.562

Explanation:

1+25= 26

0.362+0.2= 0.562

26+0.562= 26.562

or just use a calculator

The time required to travel that distance at the given speed is determined as 15.84 seconds.

The time of motion of the person is calculated as follows;

Distance = speed x time

time = distance/speed

where;

time = (0.31 mile)/(70 mph)

time = 0.0044 hr = 15.84 seconds

Thus, the time required to travel that distance at the given speed is determined as 15.84 seconds.

Learn more about time here: https://brainly.com/question/10428039

#SPJ1

Answer:

See below

Explanation:

Gallileo is CORRECT in a vacuum where there is no air friction

  air friction affects same or different weight objects differently  and will cause same-weight   or different weight  objects to fall at different speeds

[tex]F=G\frac{m_1-m_2}{r^2}[/tex]

[tex]=\frac{(6.67\times10^{-11}N*m/kg^2)(15kg) }{(0.35m)^2}[/tex]

[tex]=1.2\times10^{-7} N[/tex]

Because the weight of one ball is mg = 147 N, the gravitational force between the two balls is [tex]1.2\times10^{-7}N[/tex] or [tex]8.4*10^3[/tex] parts per billion of the  weight.

Explanation:

It represents the direction of flow of positive charge but is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition. The angle between the wires carrying current does not affect the total current in the circuit.

Answer:

It represents the direction of flow of positive charge but it is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition, because the angle between the wires carrying current does not affect the total current in the circuit.

Answer:

given,

Radius of curvature of concave mirror = 1.6m

We know that ,

Focal length = radius/2

Hence ,

Focal length of concave mirror = radius of concave mirror /2

=> F = 1.6/2

=> F = 0.8m

Hence the focal length of concave mirror is 0.8 m

Explanation:

Answer:

Explanation:

the inner ears and proprioreceptors

The average velocity of the lizard for the whole journey is 0.26 m/s Down.

The term average velocity has to do with the velocity of the lizard for the whole journey. We can see that the downward displacement is greater than the upward displacement.

Thus;

Velocity = displacement / time = 23.7 m - 15.5 m/31.5s = 0.26 m/s Down.

Thus, the average velocity of the lizard for the whole journey is 0.26 m/s Down.

Learn more about velocity:https://brainly.com/question/13639113

#SPJ1

Answer:

Using two to three sentences, summarize what you investigated and observed in this lab. I investigated that Most of my planets and moons had the element carbon in them. I observed that Different elements absorb different wavelengths of light.

Astronomers use a wide variety of technology to explore space and the electromagnetic spectrum; why do you believe it is essential to use many types of equipment when studying space?

It is essential to use a number of telescopes sensitive to different parts of the electromagnetic spectrum to study objects in space. Even though all light is fundamentally the same thing, the way that astronomers observe light depends on the portion of the spectrum they wish to study. Tools are useful, such as detectors that help see the different wavelengths of light. Not all light can get through the Earth's atmosphere, so for some wavelengths we have to use telescopes aboard satellites.

If carbon was the most common element found in the moons and planets, what element is missing that would make them similar to Earth?  Explain why. (Hint: Think about the carbon cycle.)

The missing element that would make moons and other planets similar to earth is oxygen. The two make carbon dioxide.

We know that the electromagnetic spectrum uses wavelengths and frequencies to determine a lot about outer space. How does it help us find out the make-up of stars?  

electromagnetic radiation Explanation, astronomers observe the wavelengths by putting telescopes on mountain tops and take results of what they are seeing

Why might it be useful to determine the elements that a planet or moon is made up of?

It might be useful so we can make new discoveries of life or even plants on other planets and moons. And discover maybe even more moons one other planets.

Hope this helps!!!!

Explanation:

Answer:

it would depend on which element u would be considering

Explanation:

as helium , oxygen , carbon ,sodium and other would be easier while plutonium , americium and other very radioactive elements would be harder

Answer:

~ 20 half lives

Explanation:

(1/2) ^n   = 1/1,000,000     n = number of half-lives

                                        LOG both sides to get

n LOG 1/2 = -6

n = -6/(LOG (1/2)) = 19.931    or approx  20 half lives

Answer:

Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.

Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.

Reasoning:  The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.

Hope this helps you czn!!

Please Mark me Brainleast!!!!!!!!!!

Answer:

Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.

Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.

Reasoning:  The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.

Hope this helps you czn!!

Please Mark me Brainleast!!!!!!!!!!

KE

For nitrogen n=5

So

Answer:

Area under force time graph gives ‘impulse ‘

Answer:

hope this helps and if you have any questions please feel free to ask me any time

Statement :- We assume the orthagonal sequence [tex]{{\{\phi\}}_{1}^{\infty}}[/tex] in Hilbert space, now [tex]{\forall \sf \:v\in \mathbb{V}}[/tex], the Fourier coefficients are given by:

[tex]{\quad \qquad \longrightarrow \sf a_{i}=(v,{\phi}_{i})}[/tex]

Then Bessel's inequality give us:

[tex]{\boxed{\displaystyle \bf \sum_{1}^{\infty}\vert a_{i}\vert^{2}\leqslant \Vert v\Vert^{2}}}[/tex]

Proof :- We assume the following equation is true

[tex]{\quad \qquad \longrightarrow \displaystyle \sf v_{n}=\sum_{i=1}^{n}a_{i}{\phi}_{i}}[/tex]

So that, [tex]{\bf v_n}[/tex] is projection of [tex]{\bf v}[/tex] onto the surface by the first [tex]{\bf n}[/tex] of the [tex]{\bf \phi_{i}}[/tex] . For any event, [tex]{\sf (v-v_{n})\perp v_{n}}[/tex]

Now, by Pythagoras theorem:

[tex]{:\implies \quad \sf \Vert v\Vert^{2}=\Vert v-v_{n}\Vert^{2}+\Vert v_{n}\Vert^{2}}[/tex]

[tex]{:\implies \quad \displaystyle \sf ||v||^{2}=\Vert v-v_{n}\Vert^{2}+\sum_{i=1}^{n}\vert a_{i}\vert^{2}}[/tex]

Now, we can deduce that from the above equation that;

[tex]{:\implies \quad \displaystyle \sf \sum_{i=1}^{n}\vert a_{i} \vert^{2}\leqslant \Vert v\Vert^{2}}[/tex]

For [tex]{\sf n\to \infty}[/tex], we have

[tex]{:\implies \quad \boxed{\displaystyle \bf \sum_{1}^{\infty}\vert a_{i}\vert^{2}\leqslant \Vert v\Vert^{2}}}[/tex]

Hence, Proved

Answer:

Fm is the net force down on the metal in air

Fm / 2 is the net force down on the metal in liquid

Fl is the buoyant force on the metal due to liquid

Fm - Fl = Fm / 2      equating upward and downward forces

Fm / 2 = Fl    

The specific gravity of the metal is twice that of the liquid

Note: F = M g = ρ V g     since ρ = M / V

By using Displacement method we can find volume of irregular object like marble.

In displacement method,  

First , we measuring the volume of water displaced by an object which tell us the volume of the object.

Secondly We can use the physical balance to determine its mass.

Lastly , calculate the density by dividing the mass by the volume.

Procedure to find the Volume of irregular object i.e. marble

step 1 - Fill the graduated cylinder about half full and measure the initial volume of water.

step 2 - Drop the marble in the graduated cylinder.

step 3 -Now measure the final level of water.

Step 4 - Subtract both the values.

Here , comes the Volume of Irregular Object.

For more volume related question visit here:

https://brainly.com/question/1578538

#SPJ1