The heat flux from the second airfoil is q=1260 Btu/h-ft . The negative sign indicates that heat is being transferred from the airfoil to the surrounding air.
The heat flux from the second airfoil can be determined using the equation:
q = h × (Tsurface - Tfree stream)
where q is the heat flux, h is the convection heat transfer coefficient, Tsurface is the constant surface temperature of the airfoil, and Tfree stream is the free stream temperature.
For the first airfoil with a characteristic length of L=0.2 ft, the free stream velocity is V=150 ft/s. Therefore, the free stream temperature can be calculated using the formula:
T_free stream = T + (V² / 2×Cp)
where Cp is the specific heat capacity of air at constant pressure.
Substituting the given values, we get:
T_free stream = 60F + (150² / 2×0.24) = 578.75F
Using this value and the given convection heat transfer coefficient of h=21 Btu/h-ft2.oF, we can calculate the heat flux for the first airfoil as
q_1 = 21 × (180 - 578.75) = -8433.75 Btu/h-ft
Note that For the second airfoil with a characteristic length of L=0.4 ft, the free stream velocity is V=75 ft/s. Using the same formula as before, we can calculate the free stream temperature as:
T_free stream = 60F + (75² / 2×0.24) = 325.78F
Using the same constant surface temperature of T=180F and the given convection heat transfer coefficient of h=21 Btu/h-ft2.oF, we can calculate the heat flux for the second airfoil as:
q_2 = 21 ×(180 - 325.78) = 1260 Btu/h-ft
Learn more about heat flux here
https://brainly.com/question/30708042
#SPJ11
to what potential should you charge a 0.600 μf capacitor to store 1.60 j of energy
To store 1.60 j of energy, the capacitor of 0.600 μf must be charged to a potential of 2.31 kV.
To find the potential needed to charge a 0.600 μF capacitor to store 1.60 J of energy, we can use the formula for the energy stored in a capacitor:
Energy (E) = (1/2) × Capacitance (C) × Voltage^2 (V²)
We are given the energy (E = 1.60 J) and the capacitance (C = 0.600 μF), and we need to find the voltage (V).
1. Rearrange the formula to solve for V:
V² = (2 × E) / C
2. Plug in the given values:
V² = (2 × 1.60 J) / (0.600 μF)
3. Calculate the result:
V² = 5.333... (rounded to the nearest thousandth)
4. Take the square root of both sides to find V:
V = √5.333...
5. Calculate the final value for V:
V = 2.31 kV (rounded to the nearest hundredth)
So, you should charge the 0.600 μF capacitor to a potential of 2.31 kV to store 1.60 J of energy.
Learn more about capacitor:
https://brainly.com/question/27393410
#SPJ11
When kicking a football, the kicker rotates his leg about the hip joint
a. if the velocity of the tip of the kicker’s shoe is 33 m/s and the hip joint is 0.95 m from the tip of the shoe, what is the shoe tip’s angular velocity in rad/s?
b. The Shoe is in Contact with the initally nearly
Stationary 8.500kg
20.0 ms. What average
force is exerted on the football in Newtons to
give it a velocity of 22 m/s?
Football for
c. What is the maximum range of the football in
neglecting
air resistance?
The shoe tip's angular velocity is 34.74 rad/s. The maximum range of the football neglecting air resistance is 50.07 meters.
a. We may apply the formula to get the angular velocity of the shoe tip:
v = ωr
Substituting the values, we get:
ω = v / r = 33 m/s / 0.95 m = 34.74 rad/s
b. To find the average force exerted on the football, we can use the impulse-momentum theorem, which states that:
Impulse = Change in momentum
The impulse is given by the formula:
Impulse = FΔt
Δp = mΔv
Substituting the values, we get:
FΔt = mΔv
F = mΔv / Δt = (8.5 kg)(22 m/s - 0 m/s) / (0.02 s) = 9350 N
Therefore, the average force exerted on the football is 9350 Newtons.
c. To find the maximum range of the football neglecting air resistance, we can use the range equation, which is given by:
R = ([tex]v^2[/tex]/g) * sin(2θ)
Since the football is being kicked, we can assume that it is projected at an angle of 45 degrees to the horizontal, which gives:
[tex]R = (22 m/s)^2 / (2*9.81 m/s^2) * sin(90\textdegree ) = 50.07 meters[/tex]
Air resistance, also known as drag, is a force that opposes the motion of an object as it moves through the air. When an object moves through the air, it collides with air molecules, causing them to move out of the way and create a region of low pressure behind the object. This creates a force that acts in the opposite direction of the object's motion, slowing it down.
The amount of air resistance an object experiences depends on its size, shape, and speed, as well as the properties of the air through which it is moving. For example, streamlined objects like airplanes and rockets are designed to minimize air resistance in order to maximize their speed and efficiency.
To learn more about Air resistance visit here:
brainly.com/question/11019447
#SPJ4
Consider the following types of electromagnetic radiation: (1) radio waves, (2) infrared, (3) ultraviolet, (4) visible, (5) microwave, (6) x-ray.
Arrange them in the indicated orders, from lowest to highest, by entering numbers by order in the boxes below.
a. Arrange them in order of increasing wavelength.
b. Arrange them in order of increasing frequency
c. Arrange them in order of increasing energy.
The types of electromagnetic radiation arranged in order of increasing wavelength are (6) X-ray, (3) Ultraviolet, (4) Visible, (2) Infrared, (5) Microwave, (1) Radio waves.
In order of increasing frequency, they are (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.
Lastly, in order of increasing energy, the order is (1) Radio waves, (5) Microwave, (2) Infrared, (4) Visible, (3) Ultraviolet, (6) X-ray.
Electromagnetic radiation is composed of photons, which are particles that carry energy. They can be characterized by their wavelength, frequency, and energy. The relationship between these properties is given by the formula: Energy = (Planck's constant) x (Speed of light) / Wavelength.
Wavelength and frequency are inversely proportional, so as wavelength increases, frequency decreases. Since energy is directly proportional to frequency, higher frequency means higher energy. Therefore, the order of increasing wavelength is the reverse order of increasing frequency and energy.
To know more about electromagnetic radiation click on below link:
https://brainly.com/question/10759891#
#SPJ11
what is the commonly expressed equation to describe newton’s second law of motion
The commonly expressed equation to describe Newton's second law of motion is F = m×a.
Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it, and inversely proportional to its mass.
Mathematically, this can be expressed as F = ma, where F is the net force applied to an object, m is the object's mass, and a is the resulting acceleration of the object.
In other words, the greater the force applied to an object, the greater its acceleration will be, and the more massive the object is, the less its acceleration will be for a given force.
This law is one of the fundamental principles of classical mechanics and is essential for understanding the behavior of objects in motion.
To learn more about Newton's law visit: https://brainly.com/question/25545050
#SPJ11
Hypothesis: The Elodea plants will perform photosynthesis and cellular respiration when placed in light and will only perform cellular respiration when placed in the dark. How is the dependent variable measured to test this hypothesis?
a. amount of carbon dioxide present
b. amount of oxygen present
c. number of Elodea plants
d. number of snails
e. amount of light
f. color of bromothymol blue
To test the given hypothesis, the dependent variable that needs to be measured is the amount of oxygen present. This is because photosynthesis produces oxygen as a byproduct and cellular respiration consume oxygen as a reactant.
When the Elodea plants are placed in light, they are expected to perform both photosynthesis and cellular respiration, leading to an increase in the amount of oxygen present.
On the other hand, when the Elodea plants are placed in the dark, they are expected to only perform cellular respiration, leading to a decrease in the amount of oxygen present. By measuring the amount of oxygen present in both light and dark conditions, we can determine if the hypothesis is supported or not.
The other options, such as the amount of carbon dioxide present, number of Elodea plants, number of snails, amount of light, and color of bromothymol blue are not directly related to the hypothesis and do not provide a clear indication of whether the plants are performing photosynthesis or cellular respiration.
To know more about photosynthesis refer here:
https://brainly.com/question/29775046#
#SPJ11
A combination of three electrons and two protons would have a net charge q. calculateq?
A combination of three electrons and two protons would have a net charge of -1.
A single electron has a negative charge of -1, while a single proton has a positive charge of +1. Therefore, three electrons would have a total negative charge of -3, and two protons would have a total positive charge of +2. To find the net charge, we need to add the total negative charge from the total positive charge:
q = (+2) + (-3)
q = -1
q = -1
Therefore, a combination of three electrons and two protons would have a net charge of -1.
To calculate the net charge q of a combination of three electrons and two protons, we need to consider the charge of each particle. Electrons have a negative charge of -1 and protons have a positive charge of +1 (measured in elementary charge units).
Step 1: Determine the total charge of electrons.
Since there are three electrons, their total charge is:
3 electrons * (-1) = -3
Step 2: Determine the total charge of protons.
Since there are two protons, their total charge is:
2 protons * (+1) = +2
Step 3: Calculate the net charge q by adding the charges of electrons and protons together.
q = total charge of electrons + total charge of protons
q = -3 + 2
The net charge q is:
q = -1
Learn more about net charge here:
https://brainly.com/question/30758689
#SPJ11
capacitor is charged with a total charge of q = 7.5E-05 C. The capacitor is wired in series with a resistor, R-8. Input an expression for the time constant, τ, of this circuit using the variables provided and C for capacitance.What is the value of the time constant in s if the capacitor has capacitanceHow long will it take the capacitor to discharge half of its charge in seconds?
The time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds.
The time constant of an RC circuit, denoted by τ, is given by the expression: τ = RC. where R is the resistance in ohms, and C is the capacitance in farads.
In this case, the capacitor is wired in series with a resistor of 8 ohms, and we are given the charge q on the capacitor. We can use the formula for the capacitance of a capacitor to determine its value: C = q/V
where V is the voltage across the capacitor. Since the capacitor is fully charged, the voltage across it is the maximum voltage that it can hold, which is determined by the capacitance and the charge: V = q/C
Substituting the given values, we get:
V = (7.5×10⁻⁵ C)/(C)
Solving for C, we get:
C = (7.5×10⁻⁵ C)/(V)
Substituting this value of C and the given resistance value into the expression for τ, we get:vτ = RC = (8 Ω)(7.5×10⁻⁵ C)/(V)
τ = (8 Ω)(7.5×10⁻⁵ s)/C
To determine the time it takes for the capacitor to discharge half of its charge, we can use the formula for the charge on a capacitor as a function of time in an RC circuit:
q(t) = q₀e^(-t/τ)
where q₀ is the initial charge on the capacitor (which is given as 7.5×10⁻⁵ C), and τ is the time constant of the circuit. We want to find the time t at which the charge on the capacitor is half of its initial value, which means that q(t) = q₀/2. Substituting this value and the given values for q₀ and τ, we get:
q₀/2 = q₀e^(-t/τ)
Solving for t, we get:
t = -τ ln(1/2) = τ ln(2)
Substituting the value of τ that we calculated above, we get:
t = (8 Ω)(7.5×10⁻⁵ s)/C × ln(2)
Substituting the value of C that we calculated above, we get:
t = (8 Ω)(7.5×10⁻⁵ s)/[(7.5×10⁻⁵ C)/(V)] × ln(2)
Simplifying, we get:
t = 8 V ln(2) s
Therefore, the time it takes for the capacitor to discharge half of its charge is approximately 11.7 seconds. Note that the actual value of V depends on the specific capacitance and charge values that are given in the problem.
To learn more about capacitor here:
https://brainly.com/question/17176550
#SPJ11
Consider a pipe of length 60 m in which saturated steam at 300°C is flowing. The pipe is made of copper with thermal conductivity k = 400 W/(m.K). The inner and outer diameters of the pipe are D; = 26 cm and D. = 32 cm, respectively. Outside of the pipe 1 we have air at a temperature To= 20°C and natural convective heat transfer coefficient h= 5 W/(m²K). The cooling of the pipe by air causes some of the steam inside the pipe to condense into saturated liquid, but as you know from Thermodynamics, the temperature inside the pipe does not change upon this condensation. a. Find the steady state temperature profile (temperature as a function of radius) within the pipe wall b. What is the rate at which heat is being removed from the pipe by air? c. What is the temperature at the outer surface of the pipe? d. Bonus point (1 point): What is the rate (in kg/s) at which steam is getting condensed within the pipe?
A is the surface area of the pipe, Ts is the temperature at the outer surface of the pipe, and To is the temperature of the air.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance, which determines the direction of heat flow. It is a scalar quantity that quantifies the hotness or coldness of an object or a system.
a. To find the steady state temperature profile within the pipe wall, we can apply the steady-state heat conduction equation. Since the pipe is made of copper, which is a good conductor of heat, we can assume one-dimensional radial conduction along the radial direction.
The heat conduction equation in cylindrical coordinates is given by:
∂/∂r (r * k * ∂T/∂r) = 0
where:
r is the radial distance from the center of the pipe
k is the thermal conductivity of copper (given as 400 W/(m.K))
T is the temperature
Considering the inner and outer surfaces of the pipe, we can set up the boundary conditions:
At r = r₁ (inner surface of the pipe): T = 300°C (temperature of saturated steam)
At r = r₂ (outer surface of the pipe): T = Tₒ (temperature of air, given as 20°C)
Solving the heat conduction equation with the given boundary conditions, we can obtain the steady state temperature profile within the pipe wall.
b. The rate at which heat is being removed from the pipe by air can be calculated using the convective heat transfer equation, which is given by:
Q = h * A * (T - Tₒ)
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
An object moves with simple harmonic motion on a smooth table. If the amplitude and the period are both doubled, the object's maximum speed is A. Quartered B. Quadrupled C. Doubled D. Unchanged
The maximum speed of the object will double as well.
Simple harmonic motion is a type of motion where the object oscillates back and forth with a constant period and amplitude. The maximum speed of the object occurs when it passes through the equilibrium point, where its velocity is at its maximum.When the amplitude and period are both doubled, the motion of the object becomes more exaggerated, meaning that it will oscillate over a greater distance and take longer to complete one cycle. However, the maximum speed of the object will still occur at the equilibrium point, where the acceleration is at its maximum.
Since the period is doubled, the time it takes for the object to complete one cycle is also doubled. This means that the object will spend twice as much time at the equilibrium point, where its maximum speed occurs. Therefore, the maximum speed of the object will double as well.
So, the correct answer is C. Doubled.
learn more about harmonic motion Refer: https://brainly.com/question/30404816
#SPJ11
A round steel bar A round steel bar having Sy = 800 MPa is subjected to loads producing calculated P TC Mc 4V stresses of — = 70 MPa, 200 MPa, = 300 MPa, and = 170 MPa. J 1 3 A a. Sketch Mohr circles showing the relative locations of maximum normal stress and maximum shear stress. b. Determine the safety factor with respect to initial yielding according to the maximum-shear- stress theory and according to the maximum-distortion-energy theory.
The safety factor for a round steel bar with Sy=800 MPa, subjected to P=70 MPa, T=200 MPa, M=300 MPa, and V=170 MPa, according to the maximum-shear-stress theory and maximum-distortion-energy theory is 1.47 and 1.51, respectively.
a. To sketch Mohr circles, plot the normal and shear stresses on the axes (σ,τ). Determine principal stresses (σ1, σ2) and maximum shear stress (τmax) using the equations:
σ_avg = (P+M)/2
R = sqrt(((M-P)/2)² + T²)
σ1 = σ_avg + R
σ2 = σ_avg - R
τmax = R
b. For the maximum-shear-stress theory, the safety factor (SF) is calculated as:
SF = Sy / (2 * τmax)
For the maximum-distortion-energy theory, the safety factor is calculated using the von Mises criterion:
SF = sqrt(2) * Sy / sqrt((σ1 - σ2)² + (σ2 - P)² + (P - σ1)²)
Substitute the values and calculate the safety factors for both theories.
To know more about Mohr circles click on below link:
https://brainly.com/question/29757213#
#SPJ11
what is the resistance (in ω) of twenty 305 ω resistors connected in series?
The resistance (in ω) of twenty 305 ω resistors connected in series is 6,100 ω.
The resistances in a circuit are connected either in series or in parallel. In a series circuit, the total resistance is the sum of all individual resistances. The resistance (in ω) of twenty 305 ω resistors connected in series can be calculated using the formula for series resistors: R_total = R1 + R2 + ... + Rn. Since all resistors have the same resistance (305 ω), the calculation becomes:
R_total = 20 × 305 ω = 6100 ω
Therefore, twenty 305 ω resistors connected in series will result to a total resistance of 6100 ω.
Learn more about resistance here: https://brainly.com/question/28135236
#SPJ11
What is the speed of a .28 kg baseball if its kinetic energy is 200J?
Answer: The speed of the baseball is approximately 71.4 m/s
Explanation: The formula for kinetic energy is KE = 1/2 * m * v^2, where KE is kinetic energy, m is the mass of the object, and v is its velocity/speed.
Rearranging the formula to solve for v, we get:
v = sqrt(2 * KE / m)
Substituting the given values, we get:
v = sqrt(2 * 200J / 0.28 kg)
v = sqrt(1428.57 m^2/s^2 / 0.28 kg)
v = sqrt(5102.46 m^2/s^2/kg)
v = 71.4 m/s
Use the following steps to prove Kepler's Second Law. The notation is the same as in the proof of the First Law in Section 13.4. In particular, use polar coordinates so that r = (r cos theta)i + (r sin theta)j. (a) Show that h = r^2 d theta/dt k. (b) Deduce that r^2 = d theta/dt = h. (c) If A = A(t) is the area swept out by the radius vector r = r(t) in the time interval [t_0, t] as in the figure, show that dA/dt = 1/2 r^2 d theta/dt (d) Deduce that dA/dt = 1/2 h = constant This says that the rate at which A is swept out is constant and proves Kepler's Second Law. Let T be the period of a planet about the sun: that is, T is the time required for it to travel once around its elliptical orbit. Suppose that the lengths of the major and minor axes of the ellipse are 2a and 2b. (a) Use part (d) of Problem 1 to show that T = 2 pi ab/h. (b) Show that h^2/GM = ed = b^2/a. (c) Use parts (a) and (b) to show that T^2 = 4 pi^2/GM a^3. This proves Kepler's Third Law. [Notice that the proportionality constant 4 pi^2/(GM) is independent of the planet.]
We also know from Kepler's Second Law that the rate at which area is swept out by the radius vector is constant, which means dA/dt is constant. Therefore, we can deduce that 1/2 h is constant.
What is Velocity?
Velocity is a vector quantity that describes the rate of change of displacement of an object with respect to time. It is defined as the change in displacement per unit of time and includes both magnitude (speed) and direction. Velocity is typically denoted by the symbol "v" and is measured in units of distance per time, such as meters per second (m/s) or kilometers per hour (km/h).
d(theta)/dt = h/[tex]r^{2}[/tex]
Now, recall that the area A swept out by the radius vector r in a time interval dt is given by:
dA = (1/2)[tex]r^{2}[/tex] d(theta)
Taking the derivative of both sides with respect to time t, we get:
dA/dt = (1/2)[tex]r^{2}[/tex]d(theta)/dt
Substituting the expression for d(theta)/dt from above, we get:
dA/dt = (1/2)[tex]r^{2}[/tex] (h/[tex]r^{2}[/tex])
Simplifying, we get:
dA/dt = 1/2 h
Learn more about Velocity from the given link
https://brainly.com/question/24445340
#SPJ1
two speakers, s1 and s2, operating in phase in the same medium produce the circular wave patterns shown in the diagram below. at which two points is constructive interference occurring?
The constructive interference occurs at points A and D.
Constructive interference occurs when two waves superpose (combine) in such a way that their amplitudes add up, resulting in a wave with a higher amplitude. In the case of two speakers operating in phase, where their wave patterns are aligned, constructive interference will occur at specific points where the crests of the waves align.
These points of constructive interference can be determined by examining the distance between the two speakers and the wavelength of the waves they produce. Constructive interference occurs when the path length difference between the two waves is an integer multiple of the wavelength.
Learn more about constructive interference, here:
https://brainly.com/question/31857527
#SPJ12
Your question is incomplete, most probably the full question is this:
two speakers, s1 and s2, operating in phase in the same medium produce the circular wave patterns shown in the diagram below. at which two points is constructive interference occurring?
what is the potential energy of 3 charges, each with charge 3 millicoulombs, arranged in a line? the charges are separated from each other by a distance of 1 meters.
1.62x10⁻⁴ J is the potential energy of 3 charges, each with charge 3 millicoulombs by a distance of 1 meters.
To calculate the potential energy of 3 charges arranged in a line, we need to use the formula for electric potential energy by Coulombs law
PE = k×q1×q2/d
where k is Coulomb's constant, q1 and q2 are the charges, and d is the distance between them.
In this case, we have 3 charges of 3 millicoulombs each arranged in a line, separated by a distance of 1 meter. Let's label them as q1, q2, and q3.
The potential energy of q1 and q2 is:
PE1-2 = k×q1×q2/d = (9x10⁹ N×m²/C²)×(3x10⁻³ C)×(3x10⁻³ C)/(1 m) = 8.1x10⁻⁵ J
The potential energy of q2 and q3 is:
PE2-3 = k×q2×q3/d = (9x10⁹ N×m²/C²)×(3x10⁻³ C)*(3x10⁻³ C)/(1 m) = 8.1x10⁻⁵ J
To find the total potential energy of the system, we just need to add the two values:
PE total = PE1-2 + PE2-3 = 2*(8.1x10⁻⁵ J) = 1.62x10⁻⁴ J
Therefore, the potential energy of 3 charges, each with charge 3 millicoulombs, arranged in a line and separated from each other by a distance of 1 meter, is 1.62x10⁻⁴ J.
Learn more about Coulombs law here
https://brainly.com/question/28040775
#SPJ11
abalone that has been collected. They have provided you with the market standards used to estimate an abalone value: Abalone value = [1 + 1/3 (Length - 0.5) + 1/3 (Diameter-0.4) + 1/3 (Height-0.4)] * Whole_weight * $0.5. In addition, If the abalone belongs to Category 1, its value will be multiplied by 1.5; If the abalone belongs to Category II, its value will be multiplied by 0.8. Secondly, they would like to know the average value for each gender.
To estimate the value of the abalone, we can use the market standards provided: Abalone value = [1 + 1/3 (Length - 0.5) + 1/3 (Diameter-0.4) + 1/3 (Height-0.4)] * Whole_weight * $0.5. This formula takes into account the length, diameter, height, and weight of the abalone to determine its value.
Additionally, we need to consider the category of the abalone. If it belongs to Category 1, its value will be multiplied by 1.5; if it belongs to Category II, its value will be multiplied by 0.8.
To find the average value for each gender, we would need to collect data on the abalone's gender and use the formula above to calculate the value for each abalone. We could then take the average value for all abalones of each gender separately.
learn more about value
https://brainly.com/question/29428318
#SPJ11
(a) Find the terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance, if it is being charged by a current of 10.0 A. (b) What is the output voltage of the battery charger?
(a) The terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance is 6.0 V. (b) The output voltage of the battery charger is 12.0 V.
(a) To find the terminal voltage of a 12.0-V motorcycle battery having a 0.600-Ω internal resistance, while being charged by a current of 10.0 A, we can use the formula:
Terminal voltage = EMF - (Current × Internal resistance)
Here, EMF is the electromotive force, which is 12.0 V, the current is 10.0 A, and the internal resistance is 0.600 Ω.
Terminal voltage = 12.0 V - (10.0 A × 0.600 Ω)
Terminal voltage = 12.0 V - 6.0 V
Terminal voltage = 6.0 V
(b) To find the output voltage of the battery charger, we will add the voltage drop across the internal resistance to the terminal voltage:
Output voltage = Terminal voltage + (Current × Internal resistance)
Output voltage = 6.0 V + (10.0 A × 0.600 Ω)
Output voltage = 6.0 V + 6.0 V
Output voltage = 12.0 V
You can learn more about terminal voltage at: brainly.com/question/28199592
#SPJ11
Example
We can use the idea of work to help us calculate the braking distance of a car.
A car of mass 1500 kg is travelling at a speed of 20 m/s. The brakes apply a force
of 5000 N to slow down and stop the car.
Calculate the braking distance of the car.
The braking distance of the car from the question is 60 m
What is the braking distance?The braking distance is the distance traveled by a vehicle after the brakes have been applied, until it comes to a complete stop. It is the sum of the thinking distance (the distance traveled by the vehicle while the driver reacts to a hazard and decides to apply the brakes) and the braking distance (the distance traveled by the vehicle while the brakes are being applied to slow it down).
Given that;
F = ma
a = F/m
a = 5000 N/1500 Kg
a = 3.33 m/s^2
Given that;
v^2 = u^2 - 2as
Since v = 0
u^2 = 2as
s = u^2/2a
s = (20)^2/2 * 3.33
s = 60 m
Learn more about distance:https://brainly.com/question/15172156
#SPJ1
The period of the Moon's rotation is the same as the period of its revolution: 27.3 days (sidereal).
What is the angular momentum for each rotation and revolution? (Because the periods are equal, we see only one side of the Moon from Earth.)
The angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.
How can angular momentum of the Moon's rotation and revolution can be calculated?The angular momentum of the Moon's rotation and revolution can be calculated using the formula:
L = Iω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
For the Moon's rotation, the moment of inertia can be approximated as that of a solid sphere, which is:
I = (2/5)MR^2
where M is the mass of the Moon and R is its radius.
The angular velocity can be calculated as:
ω = 2π/T
where T is the period of rotation, which is 27.3 days.
Substituting these values, we get:
L_rotation = (2/5)MR^2 * (2π/27.3 days)
For the Moon's revolution, the moment of inertia can be approximated as that of a point mass, which is:
I = MR^2
where M is the mass of the Moon and R is the radius of its orbit around the Earth.
The angular velocity can be calculated as:
ω = 2π/T
where T is the period of revolution, which is also 27.3 days.
Substituting these values, we get:
L_revolution = MR^2 * (2π/27.3 days)
Since the period of rotation and revolution is the same, both angular momenta have the same value. Therefore, we can simplify the equations to:
L = (2/5)MR^2 * (2π/27.3 days)
and
L = MR^2 * (2π/27.3 days)
which both simplify to:
L = (2π/27.3 days) * (M*R^2)
Using the known values for the mass and radius of the Moon (M = 7.342 × 10^22 kg, R = 1.737 × 10^6 m), we can calculate the angular momentum:
L = (2π/27.3 days) * (7.342 × 10^22 kg * (1.737 × 10^6 m)^2)
L = 6.68 × 10^33 kg m^2/s
Therefore, the angular momentum of the Moon's rotation and revolution is approximately 6.68 × 10^33 kg m^2/s.
Learn more about Moon's rotation
brainly.com/question/15672596
#SPJ11
An emitter follower, when driven from a 10-k ohm source, was found to have an output resistance Rout of 200 ohm. The output resistance increased to 300 ohm when the source resistance was increased to 20 k ohm. Find the overall voltage gain when the follower is driven by a 30-k ohm source and loaded by a 1-k ohm resistor.
The overall voltage gain of the emitter follower when driven by a 30-k ohm source and loaded by a 1-k ohm resistor is approximately 0.00645 or 0.645%.
To find the overall voltage gain of the emitter follower, we need to first calculate its voltage gain under the given conditions.
The voltage gain of an emitter follower is approximately unity (i.e. 1) as the output voltage follows the input voltage with a small voltage drop across the transistor. Therefore, the voltage gain of the emitter follower is independent of the input signal frequency and is close to unity for all input frequencies.
Now, to calculate the output voltage of the emitter follower when driven by a 30-k ohm source and loaded by a 1-k ohm resistor, we need to use the voltage divider rule.
The output voltage can be calculated as:
Vout = Vin * (Rout / (Rout + Rin + Rload))
Where Vin is the input voltage, Rin is the input resistance (which is equal to the source resistance), and Rload is the load resistance.
Using the given values, we get:
Vout = Vin * (200 / (200 + 30,000 + 1,000))
Vout = Vin * 0.00645
Therefore, the overall voltage gain is 0.00645 or 0.645%.
Learn more about voltage gain at https://brainly.com/question/15303426
#SPJ11
find the total work done
The total work done by the gas from D to E to F is 450J
How to solveTo calculate the total work done by the gas as it undergoes a change in state from point D to point E to point F, we need to consider the changes in pressure and volume.
The change in pressure (DF) is determined by subtracting the initial pressure of 300 N/m^2 from the final pressure of 600 N/m^2, resulting in a pressure difference of 300 N/m^2.
Similarly, the change in volume (FE) is calculated by subtracting the initial volume of 2.0 m^3 from the final volume of 5.0 m^3, resulting in a volume difference of 3.0 m^3.
Using the formula for the area of a triangle, we can determine the work done by the gas during the process.
The area of triangle DEF is half of the product of the pressure difference and the volume difference, which results in a value of 450 J.
Therefore, the total work done by the gas from D to E to F is calculated as 450 J
Read more about work done here:
https://brainly.com/question/8119756
#SPJ1
a 1700 kgkg car drives around a flat 200-mm-diameter circular track at 35 m/sm/s .What is the magnitude of the net force on the car?
We can calculate the net force: F_net = 1700 kg * 12.25 m/s^2 = 20,825 N So, the magnitude of the net force on the car is 20,825 N.
The magnitude of the net force on the car can be calculated using the formula F = ma, where F is the net force, m is the mass of the car, and a is the acceleration of the car. To find the acceleration, we can use the formula a = v^2/r, where v is the speed of the car and r is the radius of the circular track (which is half the diameter).
So, first we need to convert the diameter to radius by dividing it by 2:
r = 200 mm / 2 = 100 mm = 0.1 m
Then, we can calculate the acceleration:
a = v^2/r = (35 m/s)^2 / 0.1 m = 12,250 m/s^2
Finally, we can calculate the net force:
F = ma = (1700 kg)(12,250 m/s^2) = 20,825,000 N
Therefore, the magnitude of the net force on the car is approximately 20,825,000 N.
Learn more about net force here:
https://brainly.com/question/29095936
#SPJ11
Two loudspeakers in a plane, 5.0 m apart, are playing the same frequency. If you stand 12.0 m in front of the plane of the speakers, centered between them, you hear a sound of maximum intensity. As you walk parallel to the plane of the speakers, staying 12.0 m in front of them, you first hear a minimum of sound intensity when you are directly in front of one of the speakers. What is the frequency of the sound? Assume a sound speed of 340 m/s.
The frequency of the sound is 68 Hz, which is found by dividing the speed of sound by the wavelength, where the wavelength is determined by the path difference between the two speakers.
To find the frequency of the sound, we need to consider the path difference and the speed of the sound. When you hear maximum intensity, the path difference is a whole number multiple of the wavelength (constructive interference). When you hear minimum intensity, the path difference is a half-integer multiple of the wavelength (destructive interference).
In this case, when you're in front of one speaker, the path difference is half the distance between the speakers (5.0 m / 2 = 2.5 m). This corresponds to a half-integer multiple of the wavelength, meaning (2n + 1) * (wavelength / 2) = 2.5 m, where n is an integer.
Let's consider the smallest value of n, which is 0. Then, the wavelength is 5.0 m.
To find the frequency, we can use the equation:
frequency = speed of sound/wavelength
frequency = 340 m/s / 5.0 m
frequency = 68 Hz
So, the frequency of the sound is 68 Hz.
learn more about frequency here:
https://brainly.com/question/30611426
#SPJ11
A 55-gram ice cube at 0∘C is heated until 45g has become water at 100∘C and 10g has become steam at 100∘C. How much energy was added to accomplish the transformation?
The energy added to accomplish the transformation of the ice cube was 18,828 J. To calculate the energy added to transform the ice cube, we need to use the formula Q = m * ΔT * C, where Q is the energy added, m is the mass of the substance, ΔT is the change in temperature, and C is the specific heat capacity.
First, we need to find the energy required to melt the ice cube, which is Q = 55g * (0∘C - 0∘C) * 333 J/g⋅∘C = 0 J.
Next, we need to find the energy required to heat the water from 0∘C to 100∘C, which is Q = 45g * (100∘C - 0∘C) * 4.184 J/g⋅∘C = 18,828 J.
Finally, we need to find the energy required to vaporize 10g of water at 100∘C, which is Q = 10g * (100∘C - 100∘C) * 2,257 J/g = 0 J.
Adding all of the energy requirements together, we get:
0 J + 18,828 J + 0 J = 18,828 J.
To know more about energy refer here:
https://brainly.com/question/1932868#
#SPJ11
2a. to find the electric field at point p, first find the magnitude of electric field at point p due to each charge. (express your answer in terms of 10-6 k.)
The given units of 10^-6 k, the electric field would be expressed as N/C x 10^-6 k, where N/C is the standard unit for electric field.
To find the electric field at point P, you need to first find the magnitude of the electric field at point P due to each charge. This can be done using Coulomb's Law, which states that the magnitude of the electric field at a point is directly proportional to the magnitude of the charge and inversely proportional to the distance squared between the charge and the point.
So, if you have multiple charges, you would calculate the electric field due to each one individually, and then add up the vectors to get the net electric field at point P.
Learn more about electric here:
https://brainly.com/question/8971780
#SPJ11
if a toaster oven is labeled as 1 kw. if it is connected to a 120 v source.
(a) What current (in A) does the toaster carry?
(b) What is its resistance (in Ω)
a) The toaster carries a current of 8.33 A.
b) The resistance of the toaster oven is approximately 14.4 Ω.
(a) To find the current (in A) that the toaster carries, we can use the formula:
Power (P) = Voltage (V) × Current (I)
We're given that the toaster oven is labeled as 1 kW, which means the power (P) is 1000 W (since 1 kW = 1000 W). We also know that the voltage (V) is 120 V. We can rearrange the formula to solve for the current (I):
I = P / V
Now, plug in the given values:
I = 1000 W / 120 V
I = 8.33 A
Therefore, the toaster has an 8.33 A current.
(b) To find the resistance (in Ω) of the toaster, we can use Ohm's Law:
Voltage (V) = Current (I) × Resistance (R)
We know the voltage (V) is 120 V, and we found the current (I) to be 8.33 A. Now, we can rearrange the formula to solve for the resistance (R):
R = V / I
Now, plug in the given values:
R = 120 V / 8.33 A
R ≈ 14.4 Ω
Therefore, the toaster oven has a resistance of about 14.4.
Learn more about "resistance": https://brainly.com/question/17563681
#SPJ11
the rotating parts of a turbine of a jet engine have a 38-kg⋅m2 rotational inertia.. What is the average torque needed to accelerate the turbine from rest to a rotational velocity of 190 rad/s in 23 s ?
The turbine requires an average torque of 809,900 N.m to accelerate it from rest to a rotational velocity of 190 rad/s in 23 s.
How can I calculate average torque?Between the pivot point and the location where the force is delivered, measure the distance, r. Calculate the angle between the vector connecting the force's application point and the pivot point and the direction of the applied force. You may calculate the torque by multiplying r by F and sin.
The relationship between the turbine's rotational inertia and its angular velocity and torque may be found using the rotational kinetic energy formula: K_rot = (1/2) * I * w²
We can rearrange this equation to solve for the torque (T):
T = (I * w^2) / 2
We may first get the angular acceleration (alpha) by using the following formula to determine the torque required to accelerate the turbine from rest to a rotating velocity of 190 rad/s in 23 s.
alpha = w / t
where t is the time taken to reach the final angular velocity.
alpha = (190 rad/s) / (23 s) = 8.261 rad/s²
Next, we can use the formula for torque to calculate the average torque needed:
T = (I * w²) / 2
T = (38 kg.m²) * (190 rad/s)² / (2)
T = 809,900 N.m
To know more about torque visit:-
https://brainly.com/question/29024338
#SPJ1
Consider a circuit that contains three resistors of different values in siries with a battery. The sum of potential differences across all three resistors should be: a. equal to the potential difference of the battery b. more than the potential difference of the battery c. less than the potential difference of the battery d. Zero
In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.
In a series circuit, the total voltage across the resistors is distributed among them according to their resistances. Kirchhoff's Voltage Law states that the algebraic sum of the potential differences in any closed loop or mesh in a network is equal to zero. Therefore, the sum of the voltages across the individual resistors must be equal to the voltage supplied by the battery. The potential differences across the resistors depend on their individual resistance values and the current flowing through them.
Since the current remains the same in a series circuit, the potential differences are directly proportional to the resistances. In summary, the sum of potential differences across all three resistors in a series circuit is equal to the potential difference of the battery. In a circuit containing three resistors of different values in series with a battery, the sum of potential differences across all three resistors should be a. equal to the potential difference of the battery.
Learn more about Kirchhoff's Voltage Law at:
https://brainly.com/question/30400751
#SPJ11
the transfer of 100 kj of heat to a large mass of water at 0°c (273 °k) results in change in entropy, δs, of how much in j/°k?
In this case, q = 100 kJ and T = 273 K, so: δs = (100 kJ) / (273 K) = 0.366 kJ/K. The change in entropy (δs) of the transfer of 100 kJ of heat to a large mass of water at 0°C (273 K) can be calculated using the formula δs = q/T, where q is the heat transfer and T is the temperature in Kelvin.
Therefore, the change in entropy (δs) for the transfer of 100 kJ of heat to a large mass of water at 0°C is 0.366 kJ/K. This means that there is an increase in the randomness or disorder of the system due to the transfer of heat.
It is important to note that entropy is a state function, meaning that the change in entropy is independent of the path taken to achieve that change.
To know more about entropy, refer here:
https://brainly.com/question/24278877#
#SPJ11
a) A square loop of wire with sides of length 40 cm is in a uniform magnetic field perpendicular to its area. If the field’s strength is initially 100 mT and it decays to zero in 0.010 s, what is the magnitude of the average emf induced in the loop? b) What would be the average emf if the sides of the loop were only 20 cm?
The magnitude of the average emf induced in the loop would be:
|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.
a) The magnetic flux through the loop is given by:
Φ = BA,
where B is the magnetic field strength and A is the area of the loop. Since the loop is square, we have A = (0.4 m)² = 0.16 m².
During the 0.010 s interval, the magnetic field changes at a constant rate from 100 mT to 0, so the average magnetic field strength is:
Bavg = (100 mT + 0)/2 = 50 mT = 0.05 T.
Using Faraday's law, the induced emf is given by:
ε = -dΦ/dt,
where dΦ/dt is the rate of change of magnetic flux through the loop.
The magnetic flux through the loop changes as:
ΔΦ = BavgA = (0.05 T)(0.16 m²) = 0.008 Wb.
Therefore, the magnitude of the average emf induced in the loop is:
|ε| = ΔΦ/Δt = (0.008 Wb)/(0.010 s) = 0.80 V.
b) If the sides of the loop were only 20 cm, then the area of the loop would be A = (0.2 m)² = 0.04 m². The magnetic flux through the loop would be:
ΔΦ = BavgA = (0.05 T)(0.04 m²) = 0.002 Wb.
Therefore, the magnitude of the average emf induced in the loop would be:
|ε| = ΔΦ/Δt = (0.002 Wb)/(0.010 s) = 0.20 V.
Learn more about magnetic flux
https://brainly.com/question/30858765
#SPJ4