aluminium,metal,glass,and paper:

Hopefully, it's helpful to you -

Don't get me wrong, but I think there could be a different way to interpret Gas and Dust mean here- which just makes this brace map completely different.

Nevertheless, I did what I thought (and I still hold with it) was correct.

The chart has been filled in the attached picture.

The universe encompasses all of space and time, as well as their contents, which include planets, stars, galaxies, and all other forms of matter and energy. The Big Bang theory is the most widely accepted cosmological explanation for the evolution of the universe. According to this idea, space and time coexisted 13.7870.020 billion years ago, and the cosmos has been expanding since. While the spatial extent of the entire universe is unknown, the observable universe can be measured, which is around 93 billion light-years in diameter at the present time.

Ancient Greek and Indian thinkers devised some of the earliest cosmological conceptions of the world, which were geocentric, with Earth at the centre. More precise astronomical measurements throughout the ages prompted Nicolaus Copernicus to establish the heliocentric hypothesis, which places the Sun at the centre of the Solar System. Issac Newton based his rule of universal gravitation on Copernicus' work, as well as Johannes Kepler's equations of planetary motion and Tycho Brahe's observations.

To know more about galaxy :

https://brainly.com/question/31361315

#SPJ7.

vertical motion

h=1/2 gt²

100 = 1/2 x 10 x t²

t² = 100/5 = 20

t = 2√5 s

horizontal motion

x = v.t

x = 15 x 2√5

x = 30√5 m

Answer:

Friction     100 j

Explanation:

Friction causes the inequality between PE and KE

100 J

Answer:Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio.In AM (Amplitude Modulation) radio, the strength (amplitude) of the signal is changed (modulated) to make the sounds. In FM (Frequency Modulation) radio, it is the speed (frequency) of the signal that is changed. When you tune in your radio, the dial number indicates the kilo or megaHertz at which the signal is being broadcast.

Radio signal uses specific frequency, or how quickly the waves of the field move up and down. Hertz is a measurement of the number of wave cycles per second - AM is expressed in kiloHertz, while FM radio is expressed in megaHertz. The station power affects the range of the signal, or how far it can travel. The strongest AM power allowed in the United States is 50,000 watts.

Explanation:

Answer:

It works trough transmitted and received electromagnetic waves

Explanation:

Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio. Radio works by transmitting and receiving electromagnetic waves. The radio signal is an electronic current moving back and forth very quickly. A transmitter radiates this field outward via an antenna; a receiver then picks up the field and translates it to the sounds heard through the radio.

Answer:

Upward: Negative

Downward: Positve

Explanation:

Let upward be positive

We want to find the work done on the object upwards.

The equation of work done due to gravity is

[tex]f _{g}d \cos( \alpha ) [/tex]

It is read as force of gravity times displacement times cos of the angle between the force and displacement.

Since gravity is happening down of the center of mass and the displacement is upwards, the angle is 180° so

[tex]f_{g}d \cos(180) [/tex]

Cosine of 180 is -1

so

[tex] - f_{g}d [/tex]

If we go downwards, the sign will be positive because cos(0)=1

Answer:

Explanation:

the average weight for a pair of men's dress shoes is around 2 pounds.

Answer:

ma+mgsinh0​+f=F∴(25)(0.75)+(25)(10)sinh0​+μk​N=F∴18.75+(250)(0.6h)+μk​(mgcosh0​=F⟹18.75+150+μk​((25)(10)(0.76))=500∴168.75+μk​(190)=500⟹μk​(190)=331.25⟹μk​=1.74

Explanation:

The charge on the ball developed will be  1.78 x 10⁻⁷ Coulomb.

The field developed when a charge is moved. In this field, a charge experiences an electrostatic force of attraction or repulsion depending on the nature of charge,

Given is an electric field E = 100,000i N/C causes the 5.0 g point charge to hang at a 20° angle.

If T is the tension and θ is the angle, then

The force in  x direction Fx = T sinθ

Force in y direction Fy = T cosθ = mg

Dividing both the equation, we have

tan θ = qE /mg

Substitute the given values in the question, we have

q = 5 x10⁻³ x 9.81 x tan 20 /100000

q = 1.78 x 10⁻⁷ Coulomb.

Thus, the charge of ball is  1.78 x 10⁻⁷ Coulomb.

Learn more about electric field.

https://brainly.com/question/15800304

#SPJ1

(a) The value of the steady state charge in the circuit is 3 C.

(b) The steady-state current ,in an LRC-series circuit is 5.3 A.

The value of the steady state charge in the circuit is calculated as follows;

Q = CV(max)

Q = 0.1 x 30

Q = 3 C

I = V/R

Vrms = 0.7071 x V(max)

Vrms = 0.7071 x 30

Vrms = 21.21 V

I = Vrms/R

I = 21.21/4

I = 5.3 A

Learn more about steady state current here: https://brainly.com/question/15726481

#SPJ1

Answer:

When electric voltage is applied, an electric field within the metal triggers the movement of the electrons, making them shift from one end to another end of the conductor. Electrons will move toward the positive side.

Explanation:

the two vectors are 5i+11j+11k

Answer:

600mph

Explanation:

hope this helps!

Answer:

Hello there seems to be no Images in this question but Kinetic energy is a push or a pull force which has to do with motion if you just need to know what t is. Next time be sure to add the pictures for it.

Explanation:

Thank you!

Hello the other person (#Sonichj123), was indeed correct there appears to be no picture in your question. Although there is no picture in your question, If you have another question I will be gladly to help you!

Explanation:

Thank you so much! (≥ФωФ≤)

120V is the line-to-neutral voltage .

It is defined as the voltage of a power transmission circuit or distribution circuit up to the point of transformation or utilization.

The secondary line voltage is [tex]V_{L} = 280 V[/tex]

The notation AC indicates that the current is an alternating current.

The given formula is [tex]V_{ph} = \frac{V_{L} }{\sqrt{3} }[/tex]

Substitute  208 V into the formula

[tex]V_{ph} = \frac{V_{L} }{\sqrt{3} } \\\\V_{ph} = \frac{208V}{\sqrt{3} } \\\\= 120 (Approx)[/tex]

So, the line-to-neutral voltage is 120 V.

learn more about line voltage :https://brainly.com/question/22598217

#SPJ1

Answer:

8.16m/s south

Explanation:

North is the negative direction.

60kg*(-5m/s)+79.5kg*v=(79.5kg+60kg)*(2.5m/s)

-300kgm/s+79.5kg*v=348.75kgm/s

79.5kg*v=648.75kgm/s

v=8.16m/s

(a) The ball’s maximum speed over the net is v(max) = √2gh.

(b) The maximum speed of the horizontally moving ball clearing the net is about 27 m/s.

(c) Speed of the ball is independent of its mass.

The time of motion of the ball is calculated as follows;

h = vt + ¹/₂gt²

1 = 0 + ¹/₂(9.8)t²

1 = 4.9t²

t² = 1/4.9

t² = 0.204

t = 0.452 s

The horizontal speed of the ball is calculated as follows;

X = vt

v = X/t

v = (12 m)/(0.452)

v = 26.6 m/s ≈ 27 m/s  (proved)

P.E = K.E

mgh = ¹/₂mv²

gh = ¹/₂v²

2gh = v²

√2gh = v(max)

Speed of the ball is independent of its mass.

Learn more about horizontal velocity here: https://brainly.com/question/24681896

#SPJ1

We can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

We can determine the width/thickness of a coin by using a screw gauge because screw gauge is an instrument that measures thickness of an object that are very thin. First we can placed the coin in between the teeth of the gauge and then move the gauge until the coin can be held tightly. After that note the reading on the scale.

So we can conclude that we can calculate the width/thickness of a coin using a screw gauge by placing it in between the teeth of the gauge.

Learn more about thickness here: https://brainly.com/question/4937019

#SPJ1

Answer: 204.0 kg = 204000.0 g

Explanation:

Standard, 1 kg = 1000 g

204.0 kg = 204.0 x 1000 = 204 000.0 grams

Answer:

20m

Explanation:

So the formula for PE(Potential Energy) = Mass x Acceleration x Height

So we are given the following

PE = 1960

Mass = 10Kg

Acceleration = 9.8m/s^2 (The reason we have an acceleration is due to gravity)

Height = ?

So to calculate height we will use the same formula

1960 = 10 x 9.8 x h

1960 = 98 x h

1960 = 98h

we divide 98 on both sides

H = 20m

Hope this helped.

The SI unit is agreed internationally through an agreement known as convention of the meter.

SI unit stands for International System Of Units (SI) - which is the metric system that is used universally as a standard for measurements.

The SI unit is agreed internationally through an agreement known as convention of the meter, which describes the measurement of fundamental quantities such as mass, time, and length.

Learn more about SI unit here: https://brainly.com/question/16393390

#SPJ1

Answer:

B. period of the sound wave

Answer:

Option B - 360 J

Explanation:

One of the formulas used to find out how much work was done is :

E = 0.5×m×v² (where m is the mass and v is the velocity)

Now we substitute values from the question and simplify :

E = 0.5×500×1.2²

E = 250×1.2²

E = 250×1.44

E = 360 J

So our answer is Option B

Hope this helped and have a good day

The car A and car B are travelling at different speeds. The car that has a greater acceleration is car B.

Acceleration is defined as the rate change of velocity with time.

acceleration a = (Δv) / (Δt)

Car A is traveling with a constant velocity of 18 [m/s]. The initial and final velocity is same. So, the acceleration is given by

a = (18 -18)/ t

a = 0 m/s²

Car B speeds up from 0 [m/s] to 10 [m/s] in 4 seconds. The acceleration is

a = (10 -0)/ 4

a = 2.5 m/s²

Thus, the car B has greater acceleration.

Learn more about acceleration.

https://brainly.com/question/12550364

#SPJ1

Answer:

As the number of bulbs in series increases, both the ammeter reading and bulb brightness should decrease. Using standard ammeters may not give perfect results and if the bulbs are allowed to heat up too much in between adding more bulbs, their resistance will be higher.

Explanation:

hope it helps you and give me a brainliest

Answer:

0.24 A

Explanation:

Voltage is given by the equation :

V = I × R

Voltage = Current × Resistance

Rearrange to make Current/I the subject :

18 = I × 75

I = 18÷75

I = 0.24 A

Hope this helped and brainliest please

Answer: I think Its the Height is 11.76 Meters (38.582677 Feet) between the bridge and the ground

Explanation: Supposing that where not counting air resistance in the equation, the equation [tex]D = ut+\frac{1}{2} at^{2}[/tex] states that 1/2 multiplied by earths gravitational acceleration multiplied by the amount of time to reach the bottom: 2.4 seconds equals 11.76 meters of height between the bridge and the ground.

The difference between the manufacturer's claims and your findings is, the manufacturer is concerned about amount of fat in the meat while you are concerned about calories.

Your findings concluded that only fat can provide calories needed in the body, perhaps other classes of food or nutrients in the meat can provide calories as well.

In the manufacturer's claim there are about 3% fat in the lunch meat and doesn't necessary mean that all the calories needed is the 3% fat.

Thus, there are lots of difference between your findings and the manufacturer's claim. The manufacturer is concerned about amount of fat in the lunch meat while you are concerned about calories in the meat.

Learn more about claims here: https://brainly.com/question/2748145

#SPJ1

Answer:

A, AND B,

Explanation: just trust me bro

The reason why the moon does not fall back to the earth is that  the Moon's rotation about its own axis creates centripetal force

that balances Earth's pull.

The gravitational force is the force that keeps the solar system together. All the members of the celestial bodies are held in place by gravity.

Thus, the reason that keeps the moon from falling back to the earth is because the Moon's rotation about its own axis creates centripetal force that balances Earth's pull.

Hence,  their tangential velocity is sufficient to ensure that the flight path misses the object being orbited. The centripetal force is enough to bend the otherwise straight path into an ellipse.

Learn more about the gravitational force:https://brainly.com/question/12528243

#SPJ1

Answer:

  D. The Moon has a large tangential velocity that causes it to "miss" Earth as it falls toward it.

Explanation:

You want to know what keeps the Moon from falling directly to Earth.

The Moon does not fall directly to Earth because the direction of motion is more or less perpendicular to the direction of Earth from the Moon. That is, the large tangential velocity causes it to "miss" Earth.

Additional comment

One object will orbit another if their mutual gravitational attraction provides enough acceleration (change in speed and/or direction) to bend the path into a circular or elliptical one. If the acceleration is too little, the path may be bent, but no orbit will be established. If the acceleration is too great, the path may be bent to a curve that ultimately causes the objects to collide.

In general, the multi-body dynamics present in the solar system mean that the orbits of various objects are chaotic. In the short term, they are fairly predictable, but short-term behavior may not be predictive of long-term behavior.