all
What is Velocity

Answer:

In a series circuits, the current can flow through only one path from start to finish - accurately describes circuits.

Answer:

It is a series circuit, the current can flow through only one path from start to finish - accurately describes circuits.

Explanation:

I don't know the option but it is also the correct one.

Answer:

4. None

Explanation:

Applying,

a(t) = dV(t)/dt

Where a(t) = Acceleration of the ship at a given time.

From the question,

Given: V(t) = 5-2t

Therefore,

a(t) = dV(t)/dt = 5 m/s²

Hence it's acceleration is 5 m/s²

From the question,

The right option is 4. None

Answer:

Agricultural Engineer.

Agricultural Food Scientist.

Agricultural Inspector.

Agricultural Manager.

Agricultural Specialist.

They are;

Answer:

nonmental

Explanation:

Option B is correct. The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.

A metal, a glossy substance that transmits electricity and heat reasonably efficiently when newly manufactured, polished, or broken.

Metals are either malleable or ductile. Metals can be chemical elements like iron.

Metal is  substance floats and reacts violently with the water. When particles collide, energy is transferred. A change in temperature can be used to identify this.

The substance floats and reacts violently with the water. Based on this Information, metal is the unknown substance.

Hence, option B is correct.

To learn more about metal, refer to the link;

https://brainly.com/question/18153051

#SPJ2

Answer:

Newton's law of cooling says that the temperature of a body changes at a rate proportional to the difference between its temperature and that of the surrounding medium (the ambient temperature); dT/dt = -K(T - Tₐ) where T = the temperature of the body (°C), t = time (min), k = the proportionality constant (per minute),

Explanation:

Answer:

The speed of the wave remains the same

Explanation:

Since the speed of the wave v = √(T/μ) where T is the tension in the string and μ is the linear density of the string.

We observed that the speed, v is independent of the frequency of the  wave in the string. So, increasing the frequency of the wave has no effect on the speed of the wave in the string, since the speed of the wave in the string is only dependent on the properties of the string.

So, If you increase the frequency of oscillations, the speed of the wave remains the same.

Answer:

(a) the mass of the second body is 1.2 kg

(b)  the speed of the two-body center of mass 2.5 m/s

Explanation:

Given;

mass of the body, m₁ = 2 kg

let the mass of the second body = m₂

let the initial speed of the first body, = u₁ = 4 m/s

then, the final speed of the first body, v₁= ¹/₄u₁ = 0.25u₁

initial speed of the second body, u₂ = 0

let the final speed of the second body = v₂

Apply principle of conservation of linear momentum to determine the mass of the second body;

m₁u₁  +  m₂u₂ = m₁v₁  +  m₂v₂

2u₁  +  0(m₂)  =  2(0.25u₁)  +  m₂v₂

2u₁   =  0.5u₁  +  m₂v₂

1.5(4) = m₂v₂

6 = m₂v₂

Apply one-directional velocity

u₁ + v₁ = u₂ + v₂

u₁ + (0.25u₁) = 0 + v₂

1.25u₁ = v₂

1.25(4) = v₂

5 = v₂

Then, the mass of the second body is calculated as;

m₂v₂ = 6

5m₂ = 6

m₂ = 6/5

m₂ = 1.2 kg

(b)  the speed of the two-body center of mass after collision;

[tex]V_c_m = \frac{m_1v_1 + m_2v_2}{m_1 + m_2} \\\\V_c_m = \frac{2(0.25\times 4) \ + \ 1.2(5)}{2\ + \ 1.2} \\\\V_c_m = 2. 5 \ m/s[/tex]

Answer:

Yes the tile can withstand a force 5 N

Explanation:

We'll begin by converting the dimensions from cm to in. This can be obtained as follow:

Dimension = 50 cm x 50cm

Recall

2.54 cm = 1 in

Therefore,

50 cm = 50 cm × 1 in / 2.54 cm

50 cm = 19.685 in

Thus, the dimension becomes:

Dimension = 19.685 in × 19.685 in

Next, we shall determine the area. This can be obtained as follow:

Dimension = 19.685 in × 19.685 in

Area = 19.685 in × 19.685 in

Area = 387.5 in²

Next, we shall determine the force to which the tile can withstand. This can be obtained as follow:

Pressure (P) = 40 N/in²

Area (A) = 387.5 in²

Force (F) =?

P = F/A

40 = F/387.5

Cross multiply

F = 40 × 387.5

F = 15500 N

Thus, the tile can withstand a force up to 15500 N.

Therefore, the answer to the question is:

Yes the tile can withstand a force 5 N

Answer:

Explanation:

We shall find the final velocity of  aircraft with respect to aircraft carrier using the following relation.

v² = u² + 2as

v² = 0² + 2 x 59 x 97

v² = 11446

v = 107 m /s

velocity of aircraft carrier = 1.852 x 26 = 48.152 km/h

= 48.152 x 1000 / (60 x 60) m/s

= 13.37 m /s

This velocity of aircraft carrier will be added to the velocity of aircraft .

So absolute velocity of aircraft = 107 m /s + 13.37 m/s

= 120.37 m/s

Answer:

Yes

Explanation:

Given that the battery is the same the PD ( potential difference ) in the circuit will also be the same likewise the flow of charge in the circuit,

Hence the same amount of charge flow is delivered to any circuit.

attached below are examples

Answer:

-2.869 rad/s2

Explanation:

Data given:

speed, vi at 95.0 km/h = 95 X (1 hour /3600 seconds) X (1000m / 1km)

Note that, for every 1 hour, there will be 60sec X 60sec = 3600 seconds

And for every 1km, there will be 1000m.

So, speed of 95.0 km/h = 26.389 m/s

speed, vi  =  r ω (radius X angular velocity)

 angular velocity, ωi = v/r

ωi = 26.389  m/s ÷ half of 0.88 m diameter

= 59.975 rad/s

decelerating to speed, vf at 60.0 km/h = 60 X X (1 hour /3600 seconds) X (1000m / 1km)

= 16.667m/s

The angular velocity for this speed = 16.667m/s ÷ half of 0.88 m diameter

 = 37.879rad/s

 How far the car goes is equivalent to the angular acceleration which equals to (ωf^2 - ωi^2) ÷ 2θ

= (37.879rad/s)^2 - (59.975 rad/s)^2 ÷ 2 (60 rev X 2π rad/rev)

= -2.869 rad/s2

Answer:

(c) at rest

Explanation:

Given

See attachment for the distance time graph

Required

What does the graph illustrate?

From the graph, we can see that the line of distance is a horizontal line.

This suggests that a time increases, the distance remains unchanged

When distance remains unchanged over time, then it means the object is at rest.

Hence, (c) is correct

Answer:

The take off time is equal to 41.66s.

Explanation:

Given that,

The initial speed of the airplane, u = 0

Acceleration, a = 2 m/s²

Let v is the take off time. Using first equation of motion,

v = u +at

Put v = 300 km/hr = 83.3 m/s

So,

[tex]t=\dfrac{v}{a}\\\\t=\dfrac{83.33}{2}\\\\t=41.66\ s[/tex]

So, the take off time is equal to 41.66s.

Answer:

Maximum frequency on power spectrum plot = 101 Hz

Explanation:

Given:

Time taken for output = 15 seconds

Frequency rate = 202 Hz

Find:

Maximum frequency on power spectrum plot

Computation:

Maximum frequency = Given frequency rate / 2

Maximum frequency on power spectrum plot = Frequency rate / 2

Maximum frequency on power spectrum plot = 202 / 2

Maximum frequency on power spectrum plot = 101 Hz

Answer:

option C

Explanation:

as water vapor transfer heat, colored drops are seen inside the wrap.

Answer:

The distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Explanation:

This deceleration situation can be analyzed by means of Work-Energy Theorem, where change in translational kinetic energy is equal to the work done by friction:

[tex]\frac{1}{2}\cdot m\cdot v^{2}-\mu\cdot m\cdot g \cdot s = 0[/tex] (1)

Where:

[tex]m[/tex] - Mass of the car, in kilogram.

[tex]v[/tex] - Initial velocity, in meters per second.

[tex]\mu[/tex] - Coefficient of friction, no unit.

[tex]s[/tex] - Travelled distance, in meters.

Then we derive an expression for the distance travelled by the vehicle:

[tex]\frac{1}{2}\cdot v^{2} = \mu \cdot g \cdot s[/tex]

[tex]s = \frac{v^{2}}{\mu\cdot g}[/tex]

As we notice, the distance travelled does not depend on the mass of the vehicle. Therefore, [tex]s = d[/tex]

Answer:

not using it too much and getting addicted

Explanation:

Answer:

I just noticd i dont speak this launguage

Explanation:

a. The athlete's velocity just before reaching the pad is [tex]35.21m/s[/tex]

b. The constant force exerted on the pole vaulter is 6799.52 N

a. We use Newton's equation of motion,

                    [tex]v=u+at\\\\S=ut+\frac{1}{2}at^{2}[/tex]

Where u is initial velocity, v is final velocity, a is acceleration , t is time and S represent distance.

Given that,  s = 5.1 m , t = 0.29s, u = 0

Substitute in above equation.

            [tex]5.1=\frac{1}{2}*a*(0.29)^{2} \\\\a=\frac{5.1*2}{0.084}=121.42m/s^{2}[/tex]

the athlete's velocity, [tex]v=0+121.42*(0.29)=35.21m/s[/tex]

b. The constant force exerted on the pole vaulter due to the collision is given as,             [tex]Force=mass*acceleration[/tex]

             [tex]Force=56*121.42=6799.52N[/tex]

Learn more:

https://brainly.com/question/13532462

Answer:

4320cm

Explanation:

(length of the arc)/(length of the radius)=central angle

lengthof the arc/20=216

lengthof the arc=216×20

length of the arc=4320cm

hope this helps, let me know if I'm right!

The length measured along the arc is called length of the arc. The length of the arc defined by the central angle is 4320cm.

Central angle is the angle subtended by the arc at the center of circle.

central angle = length of the arc / length of the radius

216 = length of the arc/20

length of the arc = 216×20

length of the arc = 4320cm

Thus, the length of the arc defined by the central angle is 4320cm.

Learn more about central angle.

https://brainly.com/question/15698342

#SPJ2

answer:

standard units are the units we usually use to measure the weight, length or capacity of objects.

explanation:

Answer:

Shiny surface.

Explanation:

We know that radiation pressure is the pressure over a surface exposed to electromagnetic radiation.

Where if the radiation is absorbed by the material (like in the case of a dark surface), the pressure is the energy density flux divided by the speed of light, while if the radiation is totally reflected (idealized case, but we can suppose that this happens for a shiny surface) the pressure is twice pressure for the absorbed case.

This is a simplification for the radiation pressure but is enough to conclude that the radiation pressure is always greater on reflective surfaces, then for this case, the pressure will be greater on a shiny surface than in a dark surface,

Answer:

The answer is "[tex]16.79\ \frac{m}{s}[/tex]"

Explanation:

In this question, the halfway indicates the height that is [tex]\frac{28.8}{2}=14.4 \ m[/tex]

Using formula:

[tex]v^2=u^2+2as\\\\v^2=24^2+2(-10)(14.4)\\\\[/tex]

[tex]v^2=576-288\\\\v^2=288\\\\v=\sqrt{288}\\\\v=16.97 \ \frac{m}{s}[/tex]

Answer:

W = 16.4 kJ

Explanation:

Given that,

There are 135 steps from the ground floor to the sixth floor.

Each step is 16.6 cm tall.

The mass of a person, m = 73.5 kg

We need to find the work done by the person. We know that,

Work done = Fd

Where

d is the displacement, d = 135 × 0.166 = 22.41

So,

W = 73.5 × 10 × 22.41

= 16471.35  J

or

W = 16.4 kJ

So, 16.4 kJ is the work done by the person.

Answer:

[tex]s = ut + \frac{1}{2} g {t}^{2} \\ t(u + \frac{1}{2} gt) = H \\ u + \frac{1}{2} gt = H \\ t = 2(H - u) \div g \\ t = \frac{(H - u)}{5} \\ u \: is \: speed \: or \: velocity[/tex]

Answer :

Considering initial velocity is 0,

It takes about 0.4 seconds.

Use the equation v-u =at

4-0 = 9.8×t

t = 4/9.8 = 0.4 seconds approximately.

Answer: its b bro

Explanation:

ajafa'jfbA'FJ