The correct Answer is C. concentrated solutions.
The activities of all species tend to be smaller than the formal concentration solutions become more concentrated. The decrease in activity with increasing concentration is much more pronounced for ions than for neutral solutes. Chemists can use activities to explain various differences between ideal and real solutions. To describe a real solution, the mathematical description of an ideal solution must be modified, just as the law for ideal gases (PV = nRT) must be modified to describe real gases.
Activity measures how many particles "appear" to be present in the solution, as opposed to how many are actually present. As a result, activity acts as a "fudge factor" in ideal solutions, correcting the true concentration. agas is a unitless ratio. The ratio asolute has no units.
To learn more about concentration solutions please click on below link
https://brainly.com/question/24316606
#SPJ4
What conversion factor will help solve the problem?
2HgO → 2Hg + O2
How many moles of mercury (II) oxide are needed to make 125 grams of O2
125 g O2 x ___1 mol__O2 x ____________ = mols HgO
32.00 g O2
a
2 mol Hg
1 mol O2
b
216.6 g HgO
1 mol HgO
c
1 mol O2
2 mol HgO
d
2 mol HgO
1 mol O2
Answer:
i fond nothing sooory
pic so PC
How are plate tectonics and the rock cycle connected? Select the best answer from the choices below.
a
The rock cycle keeps the plates from moving too far apart
b
Igneous rocks that form from magma are a major part of the rock cycle
c
The heat from the mantle that fuels plate tectonics also drives the rock cycle
d
Plate tectonics causes sedimentary rocks to turn into metamorphic rocks
Circle the letter next to each sentence that is true concerning the compressibility of gases. a. The large relative distances between particles in a gas means that there is considerable empty space between the particles. b. The assumption that particles in a gas are relatively far apart explains gas compressibility. c. Compressibility is a measure of how much the volume of matter decreases under pressure. d. Energy is released by a gas when it is compressed.
Answer:
The large relative distances between particles in a gas means that there is considerable empty space between the particles.
The assumption that particles in a gas are relatively far apart explains gas compressibility.
Compressibility is a measure of how much the volume of matter decreases under pressure.
Energy is released by a gas when it is compressed
Explanation:
The kinetic molecular theory establishes that gases are composed of molecules. These molecules of gas are far apart from each other hence there is a considerable empty space between the gas molecules. As a result of these empty spaces between gas molecules, it is possible to compress a gas.
Compressibility is defined as a measure of how much the volume of matter decreases under pressure. When a gas is compressed, work is done on the gas and energy is evolved hence the gas heats up.
Agas has a pressure of 6.58 kPa at 540 K. What will the pressure be at 210 K if the volume
does not change?
26 kPa
260 kPa
17.000 kPa
17 kPa
Previous
Next >
Answer:
[tex]P_2=2.6kPa[/tex]
Explanation:
Hello there!
In this case, according to the Gay-Lussac's gas law, which illustrates the pressure-temperature behavior as a directly proportional relationship:
[tex]\frac{P_2}{T_2}=\frac{P_1}{T_1}[/tex]
We can solve for the final pressure as shown below:
[tex]P_2=\frac{P_1T_2}{T_1}[/tex]
Thus, we plug in the initial pressure and temperature and final temperature to obtain:
[tex]P_2=\frac{6.58kPa*210K}{540K}\\\\ P_2=2.6kPa[/tex]
Which is not among the choices.
Regards!
Which is the correct chemical symbol for this atom of helium?
1. Cierta muestra fue diluida así: 1 mL MP se agrega 4mL de agua, luego se extrae 0,5 mL y se lleva a 5 mL y de esta última se obtiene 0,2 y se añade 1,3 de diluyente. Calcule la dilución total.
Answer:
1/375
Explanation:
Primero se debe calcular el factor de dilución para cada dilución seriada. Para ello, se divide el volumen de muestra entre el volumen final de la solución diluida.
1) 1 mL en 1 mL + 4 mL = 5 mL
D1 = 1 mL/5 mL = 1/5
2) 0,5 mL en 5 mL
D2 = 0,5 mL/5 mL = 1/10
3) 0,2 mL en 0,2 mL + 1,3 mL = 1,5 mL
D3 = 0,2 mL/1,5 mL = 2/15
La dilución total se calcula como el producto de las diluciones seriadas realizadas:
DT = D1 x D2 x D3 = 1/5 x 1/10 x 2/15 = 1/375
A slug travels the length of a log in 2 hours. If the slug's average speed is 1.5 cm / minute how long is the log
Answer:
The length of the log is 180 cm
Explanation:
From the question given above, the following data were obtained:
Time = 2 hours
Speed = 1.5 cm/min
Distance =?
Next, we shall convert 2 hours to minutes. This can be obtained as follow:
1 h = 60 mins
Therefore,
2 h = 2 × 60
2 h = 120 mins
Finally, we shall determine the Lenght of the log. This can be obtained as follow:
Time = 120 mins
Speed = 1.5 cm/min
Distance =?
Speed = distance / time
15 = distance / 120
Cross multiply
Distance = 1.5 × 120
Distance = 180 cm
Therefore, the length of the log is 180 cm
Answer:
180
Explanation:
Which of the following is NOT a benefit of
using renewable energy sources?
Answer:
D, They produce fossil fuels
Explanation:
you can't just pull them out of nowhere
Predict the shape of the molecule.
Answer: circle
Explanation:
a plane flying at 250 mph for 5 hours. how far did the plane fly?
will give brainliest
Answer: 1250 miles
Explanation:
D=vt
1250 miles= 250mph(5hr)
A solid substance turns directly into a gas. Which term describes this change?
A)deposition
B)evaporation
C)melting
D)sublimation
Given what we know, we can confirm that the correct term to describe the change from a solid into a gas is sublimation.
What is sublimation?Sublimation is the change from a solid-state into a gas state.Most of the time one will first observe the change into a liquid state, however, with sublimation, the change is directly from the solid into the gas, such is the case with dry ice. Dry Ice is frozen carbon dioxide, as it thaws, it changes directly into its gaseous state.Therefore, we can confirm that sublimation describes the process by which an element passes from a solid directly into a gas, without first becoming a liquid.
To learn more about sublimation visit:
https://brainly.com/question/10936758?referrer=searchResults
Answer:
D. sublimation
Explanation:
Correct on Edge 2022!!!
Good luck everyone, you got this! Have a great day!
In which of the following groups of ions are the charges all shown
correctly?
Answer:
magnesium and potassium are the group of ions
Explanation:
magnessium has positive charge and pottasium has negative charge
The net force of a vehicle that is accelerating at a rate of 1.5 m/s2 is 1,800 newtons. What is the mass of the vehicle to the nearest kilogram?
Answer:
1.2kg or 1200kg
Explanation:
F = ma
net force = 1,800
m = ??
a = 1.5m/s^2
m = F/a = 1,800/1.5 or 1,800 x 10/1.5 x 10
= 18,000/15 = 1,200kg or 1.2kg
Thanks
1. Give the best advice on being understanding but kinda flirty to a friend that is a girl.
2. You can add a pickup line. :)
THIS IS AN EMERGENCY.
Which of the following are solutions?
Choose more than one if needed
1. Gas dissolved in a liquid
2. Liquid dissolved in a liquid
3. Solid mixed with solid
4. Solid dissolved in a liquid
Answer:
3
Explanation:
The plant chemical which absorbs sunlight and helps make cell food is
A.osmosis
B.cellulose
C.vaculoe
D.chlorophyll
Answer:
chlorophyll
Explanation:
Fluorine gas a 300 K occupies a volume of 500 mL. To what temperature should it be lowered to bring the volume to 300 mL?
The temperature should be lowered to 300K to bring the volume to 300mL.
What is temperature?Temperature is the degree of hotness or coldness of a place or a body. The SI unit of temperature is Kelvin.
What is volume?Volume is the amount of space occupied by matter. The SI unit of volume is cubic metre.
Using Charles law,
V1/V2 = T1/T2
Where, V1 and T1 are the initial volume and temperature
Similarly, V₂ and T₂ are the final volume and temperature.
Given:
V1 = 500mL
T1 = 300K
V2 = 300mL
T2 = ?
V1T2/V1 = V2T1/V1
T2 = V2T1/V1
= 300mL x 300K/500mL
T2 = 180K
Hence, the temperature should be lowered to 300K to bring the volume to 300mL.
To learn more about temperature and volume here
https://brainly.com/question/12050285
#SPJ2
can someone please help me:(
Answer:
I think (B) is right answer because here oxygen is a combustible material and combustible is always take place when oxygen is burn
define a lone pair and give example
Answer:In chemistry, a lone pair refers to a pair of valence electrons that are not shared with another atom in a covalent bond and is sometimes called an unshared pair or non-bonding pair. Lone pairs are found in the outermost electron shell of atoms. They can be identified by using a Lewis structure.
How many ATOMS are in 5 grams of NaCl?
Answer:
2 atoms
Explanation:
Sodium Chloride or NaCl is made up of two elements, sodium (or Na) and chlorine (or Cl). A molecule of sodium chloride, NaCl, consists of one atom each of sodium and chlorine. Hence, each molecule of NaCl has 2 atoms total.
2原子。塩化ナトリウムまたはNaClは、ナトリウム（またはNa）と塩素（またはCl）の2つの元素で構成されています。
There are approximately 3.01 x 10²² atoms in 5 grams of NaCl.
To calculate the number of atoms, we first need to convert the mass of NaCl into moles. The molar mass of NaCl is 58.44 g/mol, which is the sum of the atomic masses of sodium (22.99 g/mol) and chlorine (35.45 g/mol).
Using the formula:
moles = mass / molar mass
we can calculate the number of moles of NaCl in 5 grams:
moles = 5 g / 58.44 g/mol ≈ 0.0857 mol
Next, we need to use Avogadro's number, which is approximately 6.022 x 10²³ atoms/mol, to convert moles into atoms.
Number of atoms = moles x Avogadro's number
Number of atoms = 0.0857 mol x 6.022 x 10²³ atoms/mol ≈ 5.16 x 10²² atoms
Therefore, there are approximately 3.01 x 10²² atoms in 5 grams of NaCl.
It's important to note that this calculation assumes that all the NaCl is fully dissociated into its constituent atoms, which may not be the case in all situations.
To learn more about ATOMS, here
https://brainly.com/question/33592727
#SPJ2
Which molecule is shown below?
H
H-C-H
The
H Η Η Η Η
H-Ċ-Ċ-Ċ-Ċ -C-0-H
11 11 1
Η Η Η Η Η Η
A. 2-ethylhexane
B. 2-methylhexane
C. 3-methylhexane
D. 3-ethylhexane
Answer:
2-methylhexane
Explanation:
just took it the quiz
2-methylhexane is the molecule shown below. Hence option B is correct.
What is Molecule and atom ?Atom is smallest entity of a body. Body is made up of atoms. it is basic building block of a body. An atom consist of electrons, protons and neutrons as sub atomic particle. whole mass of the atom is concentrated at the center of the atom which we call it as nucleus, nucleus consist of proton and neutron. Electron revolve around the nucleus at determined(fixed) orbit. Total number of protons in the atom decides the atomic number and the elements in the periodic table.
Molecule is made up of atoms, it is formed when two or more atoms bound together. The electrons in the outermost orbit are responsible for the molecule formation. Electrons are shared by the atoms in the entire molecule.
In this problem the structure shown in this figure is a structure of 2-methylhexane. Hence option B is correct.
To know more about chalcogenides :
https://brainly.com/question/29215809
#SPJ7.
How many grams of KOH are needed to make 0.500 L of a 0.10 M solution
Answer:
2.8 g KOH
Explanation:
We can find the amount of moles we need by multiplying 0.500 L and the molarity given, 0.10 M (molarity is moles of solute divided by liters of solution). The liters cancel out, leaving us with moles; we can then take the moles and convert it to grams of KOH by using the molar mass of KOH.
0.500 L x 0.10 mol/1 L x 56.106 g /1 mol = 2.8 g KOH (two significant figures)
What happens with electrons when atoms form covalent bonds?
Answer:
Covalent bonding occurs when pairs of electrons are shared by atoms. Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.
Explanation:
In q = mCΔT, what does C stand for?
Answer:
The symbol c stands for specific heat and depends on the material and phase. The specific heat is the amount of heat necessary to change the temperature of 1.00 kg of mass by 1.00ºC.
Click to select the correct answers. Click again to unselect answers. Leave the incorrect answers unselected.
Choose all of the examples where there would be an increase in the electric or magnetic force.
Increase the amount of charge on each object
Decrease the distance between the objects
Decrease the charge on one of the objects
Increase the distance between the objects
Increase the mass of the objects
Answer:
1,2,5
Explanation:
I took it on usatesprep
QUESTIONS
40. Because stimulants
will be compromised.
your ability to use proper judgment on the road
A. increase your heart rate
B. overload your nervous system
C. slow down your bodily functions
D. usually cause hallucinations
Answer:
B.
Explanation:
Plants have various levels of organization. At which level of organization are the smallest structures in a plant?
Cellular
Organ
Organism
Tissue
How many Zn atoms are there in 4.65 moles of Zn?
atoms
Submit Answer
Retry Entire Group
9 more gra
What is the pH of a solution that has a pOH of 5.9
Answer:
pH = 8.1
Explanation:
Assuming that we are at 25 degrees Celsius, pH + pOH = 14.
We can then plug in the given pOH and solve for pH:
pH + pOH = 14
pH + 5.9 = 14
pH = 14 - 5.9 = 8.1
Look at the diagram below, which shows an atom of an element. How many valence electrons does it have? Based on this, would the atom be reactive or unreactive?
1. The number of valence electrons the atom have is seven (7).
2. The atom is reactive
1. How do i determine the number of valence electron in the atom?
Valence electron is simply defined as the number of electron(s) present in the outermost shell of an atom.
Considering the diagram given from the question, the number of electrons in the outermost shell is seven (7).
Thus, we can conclude that the valence electron the atom have is seven (7)
How do i know if the atom is reactive or not?From the diagram given, we determine that the number of valence electrons present is 7. This means that the atom required 1 more electron to complete its octet configuration.
Thus, the atom will be very reactive in order to quickly attain a stable configuration.
Learn more about valence electron:
https://brainly.com/question/30436806
#SPJ1