a. Therefore, the angular momentum of the fan at t = 3.0 s is 900 kg [tex]m^2/s.[/tex]
b. Therefore, the net torque on the fan at t = 3.0 s is 600 kg [tex]m^2/s^2.[/tex]
(a) The angular momentum (L) of the fan is given by:
L = Iω
I = moment of inertia and ω is the angular velocity.
Substituting the given values, we get:
L = [tex](2.5 kg m^2)(40 rad/s^3t^2) = 100t^2 kg m^2/s[/tex]
The angular momentum at t = 3.0 s, we simply substitute t = 3.0 s into the equation:
L = [tex]100(3.0 s)^2 kg m^2/s = 900 kg m^2/s[/tex]
(b) The net torque (τ) on the fan is given by:
τ = Iα
α is the angular acceleration.
Taking the derivative of the angular velocity with respect to time, we get:
α = dω/dt = 80 rad/s^3t
Substituting the given values, we get:
τ = [tex](2.5 kg m^2)(80 rad/s^3t) = 200t kg m^2/s^2[/tex]
To find the net torque at t = 3.0 s, we simply substitute t = 3.0 s into the equation:
τ = [tex]200(3.0 s) kg m^2/s^2 = 600 kg m^2/s^2[/tex]
Learn more about momentum visit: brainly.com/question/18798405
#SPJ4
The equilibrium configuration at which the torque vanishes is θ=π/2. Deviations from equilibrium may be parameterized as θ=π/2−ϵ. Using power series expansions
The equilibrium configuration at which the torque vanishes is θ=π/2, and deviations from equilibrium can be parameterized as θ=π/2−ϵ using power series expansions.
What is meant by the term "equilibrium configuration"?The term "equilibrium configuration" refers to the state of a physical system in which the net force and net torque acting on the system are both zero, and the system is not undergoing any acceleration or rotation.
What is a power series expansion?A power series expansion is a mathematical technique used to express a function as an infinite sum of terms, where each term is a power of a variable multiplied by a coefficient. Power series expansions are often used in calculus and mathematical analysis to approximate functions and solve differential equations.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ1
Determine the aerosol number and mass concentration for which the particles and the air in a unit volume of aerosol scatter equal amounts of light. Assume that the particle diameter is 0.5 mu m, m = 1.5, and rho_p = 1000 kg/m^3 [1.0g/cm^3].
The aerosol number and mass concentration for which particles and air scatter equal amounts of light depends on the particle diameter, refractive index, and density.
For particles with a diameter of 0.5 µm, a refractive index of 1.5, and a density of 1000 kg/m³, the aerosol number concentration should be approximately 2.5 × 10⁹ particles/cm³ and the mass concentration should be approximately 1.2 µg/m³.
At this concentration, the amount of light scattered by the particles and air in a unit volume of aerosol should be equal. This information is important for understanding the optical properties of aerosols, which affect climate, air quality, and visibility.
To know more about refractive index click on below link:
https://brainly.com/question/30761100#
#SPJ11
A thin semicircular rod has a total charge +Q uniformly distributed along it. A negative point charge - Q is placed as shown. A test charge +q is placed at point C (point C is equidistant from all points on the rod.). Let F_P and F_R represent the force on the test . charge and the rod respectively. Is the magnitude of the net force on +q than, less than, or equal to the magnitude of Explain. A second negative point charge -Q is placed as shown. Is the magnitude of the net electric force on +q greater than, less than, or equal to the magnitude of the net electric force on +q in part b? Explain.
The magnitude of the net force on +q will be less.
The magnitude of the net electric force on +q will be greater than the magnitude of the net electric force on +q.
In the given scenario, the force F_P on the test charge +q will be attractive towards the negative point charge -Q. The force F_R on the rod will also be attractive towards -Q due to the presence of the negative charge.
However, the force on the test charge +q will be less than the force on the rod as the test charge is equidistant from all points on the rod and experiences equal but opposite forces from opposite points on the rod, resulting in cancellation.
When a second negative point charge -Q is placed, the net force on the test charge +q will be greater than the net force in part b. This is because the presence of the second negative charge will cause a repulsive force on the first negative charge, which will in turn reduce the attractive force on the test charge +q towards the negative charge -Q.
As a result, the net electric force on the test charge +q will be greater due to the reduced attractive force towards the negative charge -Q.
For more such questions on Net electric force.
https://brainly.com/question/30262205#
#SPJ11
question 71 pts an object placed in front of a concave mirror forms an image that is real, inverted, and larger than the object. where is the object located? group of answer choices behind the mirror between the center of the mirror and the focal point between the focal point and the mirror further than the center of the mirror
If an object placed in front of a concave mirror forms an image that is real, inverted, and larger than the object,
then the object must be located between the center of the mirror and the focal point.
This is because concave mirrors have a focal point where all parallel rays converge, and objects placed within this distance will produce a larger, inverted image that is real (meaning it can be projected onto a screen).
Objects placed beyond the focal point will produce a smaller, virtual image that is upright.
Understanding the relationship between the object, mirror, and resulting image is important in optics and can be used to create magnifying lenses, telescopes, and other optical instruments.
learn more about image here:brainly.com/question/25029470
#SPJ11
Plane-polarized light passes through two polarizers whose axes are oriented at 34.0 ∘ to each other. If the intensity of the original beam is reduced to 17.0 % , what was the polarization direction of the original beam, relative to the first polarizer?
The polarization direction of the original beam was 63.4 degrees relative to the first polarizer's axis.
The angle between the two polarizers is 34.0 degrees. If the intensity of the original beam is reduced to 17.0%, then the second polarizer must have reduced the intensity by a factor of 0.17/1.00 = 0.17. This means that the first polarizer must have already reduced the intensity by a factor of sqrt(0.17) = 0.412.
Since the intensity of plane-polarized light passing through a polarizer is proportional to the cosine squared of the angle between the polarization direction and the polarizer's axis, we can use this equation to find the angle between the original beam's polarization direction and the first polarizer's axis. Let theta be this angle, then:
cos^2(theta) = 0.412
theta = 63.4 degrees
Learn More about polarization here :-
https://brainly.com/question/30002497
#SPJ11
determine the capacitance of the mercury, assuming it to be a spherical conductor (radius 2.44×106 m ).
The capacitance of the mercury spherical conductor is 7.05×10^-4 F.
To determine the capacitance of a spherical conductor, we need to use the formula C = 4πεr / (1/κ), where C is capacitance, ε is the permittivity of free space (8.85×10^-12 F/m), r is the radius of the conductor (2.44×10^6 m), and κ is the dielectric constant. Since we are assuming the conductor to be mercury, which is a metal, its dielectric constant is very close to 1.
Substituting the values in the formula, we get:
C = 4πεr
C = 4π × 8.85×10^-12 F/m × 2.44×10^6 m
C = 7.05×10^-4 F
To learn more about Capacitance of Spherical Conductor : https://brainly.com/question/12719729
#SPJ11
In Racial Formations, race is defined as a socio historical concept, what does that mean
to the authors? Do you agree with this definition why or why not? Explain how race is
socially constructed or strictly biological. Support your response with two paragraphs.
Answer:Racial formation was coined by sociologists Michael Omi and Howard Winant in the first edition of their book Racial Formation in the United States in 1986 – now in its third edition (Omi and Winant 2014). The theory has become a dominant perspective within sociology and has contributed to understanding the role of race in the contemporary United States during the latter half of the twentieth and start of the twenty-first centuries. Racial formation highlights the ways that “race” is socially constructed. That is, how do processes connected to social, economic, and political forces shape how racial categories and hierarchies are formed? This question forces us to focus on both the historical context of race categorization, as well as where our current social contexts are positioned.
Suppose that 750 g of water vapor condense to make a cloud about the size of an average room. If we assume that the latent heat of condensation is 600 cal/g, how much heat would be released to the air? If the total mass of air before condensation is 100 kg, how much warmer would the air be after condensation? Assume that the air is not undergoing any pressure changes. (Hint: Use the specific heat of air in Table, p. 34.)Table 2.1 Specific Heat of Various SubstancesSUBSTANCESPECIFIC HEAT(Cal/g × °C) J/(kg × °C)Water (pure)14186Wet mud0.62512Ice (0°C)0.52093Sandy clay0.331381Dry air (sea level)0.241005Quartz sand0.19795Granite0.19794
After the condensation of water vapor, the air would be approximately 18.75°C warmer , at the given latent heat and total mass of air before condensation.
Suppose that 750 g of water vapor condense to make a cloud about the size of an average room, and the latent heat of condensation is 600 cal/g.
To calculate the heat released to the air, we need to multiply the mass of water vapor by the latent heat of condensation.
Step 1: Calculate the heat released.
Heat released = mass of water vapor × latent heat of condensation
Heat released = 750 g × 600 cal/g
Heat released = 450,000 cal
Now, let's find out how much warmer the air would be after condensation. The total mass of air before condensation is 100 kg, and the specific heat of dry air at sea level is 0.24 cal/g°C.
Step 2: Convert mass of air from kg to grams.
mass of air = 100 kg × 1000 g/kg
mass of air = 100,000 g
Step 3: Calculate the increase in temperature.
We know that heat = mass × specific heat × change in temperature. Rearranging this equation, we get:
Change in temperature = heat / (mass × specific heat)
Change in temperature = 450,000 cal / (100,000 g × 0.24 cal/g°C)
Change in temperature ≈ 18.75°C
So, after the condensation of water vapor, the air would be approximately 18.75°C warmer.
For more information on condensation, latent heat and mass refer to https://brainly.com/question/2527210
#SPJ11
Two ice skaters, initially at rest, push off one another. What is the total momentum of the system after they push off? explain.
The total momentum of the system after they push off is 0.
According to the law of conservation of momentum, the total momentum of a system before and after an interaction must be the same, as long as there are no external forces acting on the system.
In this case, the two ice skaters are initially at rest, which means that the total momentum of the system is zero.
When the two skaters push off one another, they exchange momentum.
Skater A pushes on skater B with a certain amount of force, and as a result, skater A moves in the opposite direction with an equal amount of momentum.
Similarly, skater B pushes on skater A with the same force, and moves in the opposite direction with the same amount of momentum.
Since the momentum of each skater is equal and opposite, the total momentum of the system after they push off is still zero.
However, each skater now has an individual momentum that is equal in magnitude but opposite in direction to the other skater's momentum.
In summary, the total momentum of the system (i.e. both skaters) is conserved before and after they push off, and is equal to zero.
Learn more about momentum:
https://brainly.com/question/1042017
#SPJ11
For an object undergoing a uniform circular motion with radius 8.723 m and period 3.034 sec, the centripetal acceleration (m/s2) is:
The centripetal acceleration of the object is 33.536 m/s².
For the linear velocity of the object, we can use the formula:
v = 2πr/T
Substituting the given values, we get:
v = 2π(8.723 m)/(3.034 sec) = 17.122 m/s
Now, substituting the values of v and r in the formula for centripetal acceleration, we get:
a = v²/r = (17.122 m/s)²/ (8.723 m) = 33.536 m/s²
Centripetal acceleration is a type of acceleration that occurs when an object moves in a circular path. It is the acceleration that is directed toward the center of the circular path and is responsible for keeping the object moving in a circular motion.
The magnitude of the centripetal acceleration can be calculated using the formula a = v²/r, where a is the centripetal acceleration, v is the velocity of the object, and r is the radius of the circular path. The direction of the centripetal acceleration is always towards the center of the circular path, perpendicular to the velocity of the object. This acceleration is caused by the net force acting on the object, which is directed toward the center of the circle.
To learn more about Centripetal acceleration visit here:
brainly.com/question/14465119
#SPJ4
Answer for 50pts
1. Draw a free body diagram for each of the following objects:
a. a projectile accelerating downward in the presence of air resistance
b. a crate being pushed across a flat surface at constant speed
2. A bag of sugar has a mass of 2.0 kg
a. What is its weight in newtons on the moon, where acceleration due to gravity is one-sixth of that on Earth?
b. What is its weight on Jupiter, where acceleration due to gravity is 2.64 times that on Earth?
3. A 3.0 kg block on an incline at a 50.0o angle is held in equilibrium by a horizontal force.
a. Determine the magnitude of this horizontal force (disregard friction)
b. Determine the magnitude of the normal force on the block
4. A 60 kg ice skater is at rest on a flat skating rink. A 200 N horizontal force is needed to set the skater in motion. However, after the skater is in motion, a horizontal force of 180 N keeps the skater moving at a constant velocity. Find the coefficients of static and kinetic friction between the skates and the ice.
Explanation:
1a. Free body diagram of a projectile accelerating downward in the presence of air resistance:
Free body diagram of a projectile accelerating downward in the presence of air resistance
b. Free body diagram of a crate being pushed across a flat surface at constant speed:
Free body diagram of a crate being pushed across a flat surface at constant speed
2a. Weight of the bag of sugar on the moon:
Weight = mass x acceleration due to gravity
On the moon, acceleration due to gravity is one-sixth of that on Earth, so
Weight on the moon = 2.0 kg x (1/6) x 9.81 m/s^2 = 3.27 N
b. Weight of the bag of sugar on Jupiter:
On Jupiter, acceleration due to gravity is 2.64 times that on Earth, so
Weight on Jupiter = 2.0 kg x 2.64 x 9.81 m/s^2 = 51.6 N
3a. To hold the block in equilibrium, the horizontal force must balance the component of the weight force that acts parallel to the incline. The weight force is given by:
Weight = mass x gravity
Weight = 3.0 kg x 9.81 m/s^2 = 29.43 N
The component of the weight force parallel to the incline is given by:
Force_parallel = Weight x sin(50.0o)
Force_parallel = 29.43 N x sin(50.0o)
Force_parallel = 22.58 N
Therefore, the magnitude of the horizontal force required to hold the block in equilibrium is 22.58 N.
b. The normal force on the block is equal in magnitude and opposite in direction to the component of the weight force that acts perpendicular to the incline. This is given by:
Force_perpendicular = Weight x cos(50.0o)
Force_perpendicular = 29.43 N x cos(50.0o)
Force_perpendicular = 22.52 N
Therefore, the magnitude of the normal force on the block is 22.52 N.
A large air conditioner has a resistance of 8.0 Ωand an inductive reactance of 17 Ω . The air conditioner is powered by a 55.0 Hz generator with an rms voltage of 220 V .
A) Find the impedance of the air conditioner. Z=_____Ω
B)Find the rms current. Irms=______A
C)Find the average power consumed by the air conditioner. Pav=______W
A) To find the impedance of the large air conditioner (Z), we can use the formula:
Z = √(R² + XL²)
where R is the resistance (8.0 Ω) and XL is the inductive reactance (17 Ω).
Z = √(8.0² + 17²) = √(64 + 289) = √353 ≈ 18.8 Ω
B) To find the rms current (Irms), we can use Ohm's Law:
Irms = Vrms / Z
where Vrms is the rms voltage (220 V) and Z is the impedance (18.8 Ω).
Irms = 220 / 18.8 ≈ 11.7 A
C) To find the average power consumed by the air conditioner (Pav), we can use the formula:
Pav = Irms² × R
where Irms is the rms current (11.7 A) and R is the resistance (8.0 Ω).
Pav = (11.7²) × 8 ≈ 1372 W
Your answer:
A) The impedance of the air conditioner is approximately 18.8 Ω.
B) The rms current is approximately 11.7 A.
C) The average power consumed by the air conditioner is approximately 1372 W.
https://brainly.com/question/31484975
#SPJ11
Consider the example you just thought of with your partner. What steps would you then follow to solve the problem?
There are different ways to solve a problem but most of them share some common steps. Here are some of the most common steps that can help you solve a problem: Define the problem, Analyze the situation, identify possible solutions, Evaluate and select a solution, Implement and follow up on the solution.
Analyze is to methodically study or investigate anything in depth. You can determine what you need to study for the final exam by looking at your math's assessments from earlier in the year. The noun analysis is where this verb analysis originates. The term analysis was also derived from the Greek verb analyzing, which means "to dissolve."
If you enter analysis, it means that a mental health professional will assess you, assist you, and analyze your specific issues in order to help you discover solutions."Exactly that is what I'm referring to. And perhaps we could blow up or barricade the Griever Hole's entrance. Buy some time to consider the maze.
Learn more about Analyze here:
brainly.com/question/25503719
#SPJ4
a spring has a relaxed length of 5 cm and a stiffness of 150 n/m. how much work must you do to change its length from 7 cm to 12 cm? n·m
The amount of work you must do to change the length of the spring from 7 cm to 12 cm is 0.3375 N·m.
To find the work required to change the spring's length from 7 cm to 12 cm, we'll use the formula for work done on a spring, which is W = (1/2)k(x₂² - x₁²), where W is the work, k is the stiffness or spring constant, x₂ is the final length, and x₁ is the initial length.
In this case, the stiffness (k) is 150 N/m, the initial length (x₁) is 7 cm - 5 cm = 2 cm (0.02 m), and the final length (x₂) is 12 cm - 5 cm = 7 cm (0.07 m).
Plug these values into the formula: W = (1/2)(150)(0.07² - 0.02²) = (1/2)(150)(0.0049 - 0.0004) = 75(0.0045) = 0.3375 N·m
So, you must do 0.3375 N·m of work to change the spring's length from 7 cm to 12 cm.
Learn more about spring here: https://brainly.com/question/27956135
#SPJ11
A balanced three-phase Y-Δ system has Van = 208 ∠∠0° V and ZΔ = (51 + j45) Ω. If the line impedance per phase is (0.4 + j1.2) Ω, find the total complex power delivered to the load. The total complex power delivered to the load S = ( + j) kVA.
The total complex power delivered to the load is S = (8367.08 - j470.97) kVA.
To find the total complex power delivered to the load, we can use the formula:
S = 3 * Van² * ZΔ / (3 * Zline + ZΔ)
where S is the complex power delivered to the load, Van is the line-to-neutral voltage, ZΔ is the load impedance in the delta configuration, and Zline is the impedance of each line.
Given:
Van = 208 ∠∠0° V
ZΔ = (51 + j45) Ω
Zline = (0.4 + j1.2) Ω
Substituting these values into the formula, we get:
S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / [3 * (0.4 + j1.2) Ω + (51 + j45) Ω]
Simplifying the expression in the denominator:
3 * (0.4 + j1.2) Ω + (51 + j45) Ω
= (1.2 + j3.6) Ω + (51 + j45) Ω
= 52.2 + j48.6 Ω
Substituting this back into the formula and simplifying, we get:
S = 3 * (208 ∠∠0°)² * (51 + j45) Ω / (52.2 + j48.6 Ω)
= 8526.24 ∠∠-3.164° VA
= (8526.24 cos(-3.164°) + j8526.24 sin(-3.164°)) kVA
= (8367.08 - j470.97) kVA
learn more about Voltage here:
https://brainly.com/question/29910116
#SPJ11
A person is pulling a heavy box on a set of frictionless rollers by a sturdy rope across a horizontal floor. The rope makes an angle of 40° above the horizontal. The box is 115 kg & moves at constant acceleration along the floor. A scale between the rollers & the box measures the normal force to be 685 N. What is the magnitude of the tension in the rope?
The magnitude of the tension in the rope is 1,029 N.
How to find the magnitude of the tension in the rope?To calculate the magnitude of tension in the rope, we use the following formula:
The normal force acting on the box is equal to the weight of the box, which is given by:
N = mg
where N is the normal force, m is the mass of the box, and g is the acceleration due to gravity (9.8 m/s²). Substituting the given values, we get:
685 N = (115 kg) x (9.8 m/s²)
Solving for the mass, we get:
m = 115 kg
To find the tension in the rope, we need to resolve the forces acting on the box in the horizontal and vertical directions. In the vertical direction, the weight of the box is balanced by the normal force, so there is no net force. In the horizontal direction, the tension in the rope is the only force acting on the box, and it causes the box to accelerate. The horizontal component of the tension can be found by:
T cos 40° = ma
where T is the tension in the rope, a is the acceleration of the box, and the angle 40° is the angle between the rope and the horizontal. The vertical component of the tension can be found by:
T sin 40° = N
where N is the normal force acting on the box.
Substituting the given values, we get:
T cos 40° = (115 kg) x a
T sin 40° = 685 N
Dividing the two equations, we get:
tan 40° = a/g
Solving for the acceleration, we get:
a = (tan 40°) x g = 6.23 m/s²
Substituting this value into the first equation, we get:
T cos 40° = (115 kg) x (6.23 m/s²)
Solving for the tension, we get:
T = [(115 kg) x (6.23 m/s²)] / cos 40°
T = 1,029 N
Learn more about Tension
brainly.com/question/15880959
#SPJ11
1
A sound wave produced by a chime 515 m away is heard 1.50 s
later. What is the speed of the sound in air?
a 534 m/s
b 433 m/s
c 234 m/s
d 343 m/s
the speed of sound in air is 343 m/s. Option d (343 m/s) is the correct answer.
How to solve the question?
The speed of sound in air can be calculated using the formula:
v = d/t
Where v is the speed of sound, d is the distance traveled by the sound wave, and t is the time taken for the sound wave to travel that distance.
In this problem, we are given that the distance between the chime and the observer is 515 m, and the time taken for the sound wave to travel this distance is 1.50 s. So, we can use the above formula to calculate the speed of sound:
v = d/t = 515/1.5 = 343 m/s
Therefore, the speed of sound in air is 343 m/s.
Option d (343 m/s) is the correct answer.
It's worth noting that the speed of sound in air can be affected by various factors such as temperature, humidity, and pressure. At a standard temperature of 20°C and normal atmospheric pressure, the speed of sound in air is approximately 343 m/s. However, this value can vary depending on the conditions in which the sound wave is traveling.
To know more about sound waves visit :-
https://brainly.com/question/1199084
#SPJ1
a sample of helium gas has a volume of 546 ml at a pressure of 1.60 atm and a temperature of 137 ∘c. what is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 ∘c
1.35 atm is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 °C.
We can use the combined gas law formula, which is:
([tex]P_1[/tex]×[tex]V_1[/tex]) / [tex]T_1[/tex] = ([tex]P_2[/tex]× [tex]V_2[/tex]) / [tex]T_2[/tex]
Where [tex]P_1[/tex] and[tex]P_2[/tex] are initial and final pressures,[tex]V_1[/tex] and [tex]V_2[/tex] are initial and final volumes, and [tex]T_1[/tex] and [tex]T_2[/tex] are initial and final temperatures.
First, convert temperatures to Kelvin:
[tex]T_1[/tex] = 137 + 273.15 = 410.15 K
[tex]T_2[/tex] = 158 + 273.15 = 431.15 K
Now, we can plug in the given values and solve for the final pressure [tex]P_2[/tex]:
(1.60 atm ×546 mL) / 410.15 K = ([tex]P_2[/tex]× 657 mL) / 431.15 K
To solve for [tex]P_2[/tex], we can rearrange the equation:
[tex]P_2[/tex] = (1.60 atm × 546 mL ×431.15 K) / (410.15 K× 657 mL)
Now, we can calculate [tex]P_2[/tex]:
[tex]P_2[/tex] = (1.60 × 546 × 431.15) / (410.15× 657) ≈ 1.35 atm
So, the pressure of the helium gas sample when the volume is 657 mL and the temperature is 158 °C is approximately 1.35 atm.
To know more about Pressure refer here :
https://brainly.com/question/28012687
#SPJ11
1.35 atm is the pressure of the gas in atm when the volume is 657 ml and the temperature is 158 °C.
We can use the combined gas law formula, which is:
([tex]P_1[/tex]×[tex]V_1[/tex]) / [tex]T_1[/tex] = ([tex]P_2[/tex]× [tex]V_2[/tex]) / [tex]T_2[/tex]
Where [tex]P_1[/tex] and[tex]P_2[/tex] are initial and final pressures,[tex]V_1[/tex] and [tex]V_2[/tex] are initial and final volumes, and [tex]T_1[/tex] and [tex]T_2[/tex] are initial and final temperatures.
First, convert temperatures to Kelvin:
[tex]T_1[/tex] = 137 + 273.15 = 410.15 K
[tex]T_2[/tex] = 158 + 273.15 = 431.15 K
Now, we can plug in the given values and solve for the final pressure [tex]P_2[/tex]:
(1.60 atm ×546 mL) / 410.15 K = ([tex]P_2[/tex]× 657 mL) / 431.15 K
To solve for [tex]P_2[/tex], we can rearrange the equation:
[tex]P_2[/tex] = (1.60 atm × 546 mL ×431.15 K) / (410.15 K× 657 mL)
Now, we can calculate [tex]P_2[/tex]:
[tex]P_2[/tex] = (1.60 × 546 × 431.15) / (410.15× 657) ≈ 1.35 atm
So, the pressure of the helium gas sample when the volume is 657 mL and the temperature is 158 °C is approximately 1.35 atm.
To know more about Pressure refer here :
https://brainly.com/question/28012687
#SPJ11
how long does it take to fully charge an electric vehicle battery with 60 kwh energy at home. assume the residential voltage at 120v and current at 20a
The time it takes to fully charge an electric vehicle battery with 60 kWh of energy at home depends on the charging speed and the power source. With a residential voltage of 120v and a current of 20a, the charging power is 2.4 kW.
To calculate the charging time, we divide the battery's energy capacity (60 kWh) by the charging power (2.4 kW), which gives us a charging time of 25 hours.
However, most electric vehicle owners install a higher voltage charging station, which reduces the charging time significantly. For example, a Level 2 charging station with 240v and 30a can charge the same battery in about 10 hours.
Additionally, some electric vehicles have fast charging capabilities that can charge the battery up to 80% in as little as 30 minutes. It is essential to understand the charging speed and the charging infrastructure available to make informed decisions about charging your electric vehicle.
To know more about electric vehicle battery refer here:
https://brainly.com/question/13806305#
#SPJ11
Which set of changes will always increase the current in an electrical circuit?
A. Decreasing voltage and decreasing resistance
B. Increasing voltage and decreasing resistance
C. Decreasing voltage and increasing resistance
OD. Increasing voltage and increasing resistance
SUBMIT
Answer: D
Explanation: Ohm's law states that the electrical current (I) flowing in an circuit is proportional to the voltage (V) and inversely proportional to the resistance (R). Therefore, if the voltage is increased, the current will increase provided the resistance of the circuit does not change.
what is the emf ℰx (in v) of a cell being measured in a potentiometer, if the standard cell's emf is 12.0 v and the potentiometer balances for rx = 5.100 ω and rs = 2.300 ω?
The emf ℰx of the cell being measured in the potentiometer is 21.41 V. To calculate the emf ℰx of the cell being measured in a potentiometer, we can use the formula:
ℰx = ℰ standard * (rs + rx) / rx
Where ℰ standard is the emf of the standard cell, rs is the resistance in the potentiometer arm, and rx is the resistance of the resistor in series with the cell being measured.
Substituting the given values, we get:
ℰx = 12.0 * (2.300 + 5.100) / 5.100
ℰx = 12.0 * 1.7843
ℰx = 21.41 V
Therefore, the emf ℰx of the cell being measured in the potentiometer is 21.41 V. This means that the cell being measured has a higher emf than the standard cell. The potentiometer balances when the potential difference across the resistor in series with the cell being measured is equal to the potential difference across the potentiometer arm. This indicates that the two potential differences are equal and opposite, and cancel each other out, resulting in a balanced condition.
For more such questions on Potentiometer, visit:
brainly.com/question/30009729
#SPJ11
a torque of 0.97 n⋅m is applied to a bicycle wheel of radius 25 cm and mass 0.65 kg. Treating the wheel as a hoop, find its angular acceleration.
The angular acceleration of the bicycle wheel is 23.9 rad/s².
To find the angular acceleration of the bicycle wheel, we need to use the formula:
α = τ / I
where α is the angular acceleration, τ is the torque applied, and I is the moment of inertia of the wheel. Since we are treating the wheel as a hoop, the moment of inertia can be found using the formula:
I = MR²
where M is the mass of the wheel and R is the radius of the wheel. Substituting the given values, we get:
I = (0.65 kg) × (0.25 m)²
I = 0.0406 kg⋅m²
Now we can substitute the values into the formula for angular acceleration:
α = (0.97 N⋅m) / (0.0406 kg⋅m²)
α = 23.9 rad/s²
To learn more about Angular Acceleration : https://brainly.com/question/21278452
#SPJ11
The vertical line above represents the reflecting surface of a flat mirror while the dot on the left represents the local of a small bug. Using a straight edge and being concerned for the correct scale: Draw the location of the image of the bug in the mirror. Draw four light rays that come from the bug and that are reflected from the mirror. Show the relation between these light rays and the location of the image of the bug. Also show the relation between the angle of incidence and the angle of reflection in the reflected ray.
Drawing the location of the image of the bug in the mirror and the reflected rays from the bug allows us to visualize how flat mirrors reflect light and form images, and how the angles of incidence and reflection are related.
To draw the location of the image of the bug in the mirror, we first draw a perpendicular line to the reflecting surface of the flat mirror at the location of the bug. This perpendicular line represents the normal to the surface of the mirror.
Then we draw a line from the bug to the mirror, making sure that the angle of incidence is equal to the angle of reflection. This line represents the incident ray. We extend this line behind the mirror, and where it intersects the normal line, we draw a dashed line representing the reflected ray. We repeat this process for a few more rays coming from different points on the bug.
To be more specific, we draw four light rays coming from the bug, such that two of the rays are parallel to each other and pass through the top and bottom of the bug, while the other two rays are also parallel to each other and pass through the left and right sides of the bug.
The image of the bug will be located at the point where these reflected rays intersect. This point will be behind the mirror, as the image is virtual, meaning it appears to be behind the mirror but is not a physical object.
The angle of incidence and the angle of reflection will be equal for each of the reflected rays, and these angles will be measured with respect to the normal to the surface of the mirror at the point of incidence. Therefore, the angle of incidence and the angle of reflection will be equal and opposite for each of the reflected rays.
Overall, drawing the location of the image of the bug in the mirror and the reflected rays from the bug allows us to visualize how flat mirrors reflect light and form images, and how the angles of incidence and reflection are related.
For more such questions image visit:
https://brainly.com/question/23864253
#SPJ11
An organ pipe with a fundamental frequency f is open at both ends. If one end is closed off, the fundamental frequency, then will become????
The answer is 0.5 the frequency, Why?
The fundamental frequency will become 0.5 times the original frequency when one end of an open organ pipe is closed off due to the formation of a node at the closed end, resulting in half the wavelength.
When an open organ pipe is closed at one end, the wavelength of the fundamental frequency is halved due to the formation of a node at the closed end, while the length of the pipe remains the same. The frequency of a wave is inversely proportional to its wavelength, so halving the wavelength doubles the frequency. Therefore, the fundamental frequency becomes 0.5 times the original frequency. This phenomenon is used in various musical instruments like clarinets and flutes, where closing holes changes the effective length of the pipe, changing the frequency of the sound produced.
Learn more about organ pipe here:
https://brainly.com/question/24188759
#SPJ11
Gamma rays are photons with very energy. What is the wavelength of a gamma-ray photon with energy 7.7 Times 10^-13 J ? (c = 3.0 Times 10^8 m/s, h = 6.626 Times 10^-34 J middot s) 2.6 Times 10^-13 m 3.9 Times 10^13 m 3.1 Times 10^-13 m 3.5 Times 10^-13 m
The correct answer is 2.6 Times 1[tex]0^-13 m.[/tex] in the given case
The energy of a photon is related to its wavelength by the equation:
E = hc/λ
where E is the energy of the photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.
Rearranging this equation to solve for λ, we get:
λ = hc/E
Plugging in the values we know, we get:
λ = [tex](6.626 × 10^-34 J·s)(3.0 × 10^8 m/s)/(7.7 × 10^-13 J) ≈ 2.6 × 10^-13 m[/tex]
Therefore, the wavelength of a gamma-ray photon with energy [tex]7.7 × 10^-13[/tex]J is approximately[tex]2.6 × 10^-13 m.[/tex]
So, the correct answer is 2.6 Times [tex]10^-13 m.[/tex].
To learn more about Gamma rays here
https://brainly.com/question/22166705
#SPJ4
What is the energy of photons with wavelength l=5800 Angostrom? (1 Angstrom = 10-10 meter)
a. Zero Joule;
b. 5800 Joule;
c. 1/4 Joule;
d. 3.4 x 10-19 erg;
e. 3.4 x 10-19 Joule.
The energy of photons with wavelength λ=5800 Å is approximately 3.4 x [tex]10^-^1^9[/tex] Joules . option e is correct. .
To find the energy of the photons, we can use the formula:
E = (hc) / λ
where E is the energy of the photon, h is the Planck's constant (6.63 x [tex]10^-^3^4[/tex]Js), c is the speed of light (3 x [tex]10^8[/tex] m/s), and λ is the wavelength of the photon.
First, let's convert the wavelength from Å to meters:
5800 Å = 5800 x 10^-10 meters = 5.8 x [tex]10^-^7[/tex] meters
Now, we can plug in the values into the formula:
E = (6.63 x [tex]10^-^3^4[/tex]Js × 3 x [tex]10^8[/tex]m/s) / 5.8 x [tex]10^-^7[/tex]m
E ≈ 3.43 x [tex]10^-^1^9[/tex] Joules
So, the energy of photons with wavelength λ=5800 Å is approximately [tex]10^-^1^9[/tex] Joules (option e).
To know more about energy of photons refer here :
https://brainly.com/question/30741819
#SPJ11
The energy of photons with wavelength λ=5800 Å is approximately 3.4 x [tex]10^-^1^9[/tex] Joules . option e is correct. .
To find the energy of the photons, we can use the formula:
E = (hc) / λ
where E is the energy of the photon, h is the Planck's constant (6.63 x [tex]10^-^3^4[/tex]Js), c is the speed of light (3 x [tex]10^8[/tex] m/s), and λ is the wavelength of the photon.
First, let's convert the wavelength from Å to meters:
5800 Å = 5800 x 10^-10 meters = 5.8 x [tex]10^-^7[/tex] meters
Now, we can plug in the values into the formula:
E = (6.63 x [tex]10^-^3^4[/tex]Js × 3 x [tex]10^8[/tex]m/s) / 5.8 x [tex]10^-^7[/tex]m
E ≈ 3.43 x [tex]10^-^1^9[/tex] Joules
So, the energy of photons with wavelength λ=5800 Å is approximately [tex]10^-^1^9[/tex] Joules (option e).
To know more about energy of photons refer here :
https://brainly.com/question/30741819
#SPJ11
Choose the statement that correctly describes the solar neutrino problem. a. Detectors were only looking for one kind of neutrino and were not sensitive to other types of neutrinos. b. Detectors were observing faster—than—light neutrinos. c. Detectors were not sensitive enough to observe any types of neutrinos. d. The neutrinos detected were too large based on theoretical predictions.
The statement that correctly describes the solar neutrino problem is: a. Detectors were only looking for one kind of neutrino and were not sensitive to other types of neutrinos.
What is Neutrinos?
Neutrinos are subatomic particles that belong to the family of leptons, which also includes electrons. They have no electric charge, very little mass, and interact only weakly with other matter, making them very difficult to detect. Neutrinos are produced by nuclear reactions in the Sun, as well as in supernovae, cosmic rays, and particle accelerators.
The solar neutrino problem refers to a discrepancy between the number of neutrinos predicted by theoretical models of the Sun's nuclear reactions and the number of neutrinos actually detected by experiments on Earth. The early neutrino detectors were designed to detect electron neutrinos, which are the type of neutrinos produced by the Sun's fusion reactions.
Learn more about Neutrinos from the given link
https://brainly.com/question/29678174
#SPJ1
A 200,000 kg space probe is landing on an alien planet with a gravitational acceleration of 9.25. If its fuel is ejected from the rocket motor at 49,000 m/s what must the mass rate of change of the space ship (delta m)/(delta t) be to achieve at upward acceleration of 2.00 m/s^2? Remember to use the generalized form of Newton's Second Law.
The mass rate of change of the spaceship (delta m)/(delta t) needed to achieve an upward acceleration of 2.00 m/s² is 9,500 kg/s.
To solve this problem, we'll use the generalized form of Newton's Second Law: F = m * a + (delta m)/(delta t) * v_e, where F is the net force, m is the mass of the spaceship, a is the acceleration, (delta m)/(delta t) is the mass rate of change, and v_e is the exhaust velocity.
1. Calculate the net force: F = m * (g + a) = 200,000 kg * (9.25 m/s² + 2.00 m/s²) = 2,250,000 N
2. Rearrange the formula to find (delta m)/(delta t): (delta m)/(delta t) = (F - m * a) / v_e
3. Plug in the values: (delta m)/(delta t) = (2,250,000 N - 200,000 kg * 2.00 m/s²) / 49,000 m/s = 9,500 kg/s
To know more about Newton's Second Law click on below link:
https://brainly.com/question/13447525#
#SPJ11
a magnetron in a kitchen microwave oven resonates at 2.50 ghz in a manner analogous to an rlc circuit.
Magnetron in a kitchen microwave oven operates as a resonant circuit similar to an RLC circuit. The resonant frequency is determined by the dimensions of the resonant cavity and the magnetic field strength. This generates high-frequency microwaves that are used to heat food.
A magnetron in a kitchen microwave oven is a type of vacuum tube that generates microwaves used to heat food. The magnetron operates by using a combination of electric and magnetic fields to excite electrons and cause them to move in a circular motion.
This movement creates a resonant circuit that generates a high-frequency electromagnetic wave at a frequency of 2.50 GHz. An RLC circuit is an electrical circuit that contains a resistor, an inductor, and a capacitor.
The circuit can resonate at a certain frequency, which is determined by the values of the components in the circuit. In a magnetron, the resonant circuit is created by the interaction of the magnetic field and the electrons moving in the circular motion.
Know more about frequency here:
brainly.com/question/14480835
#SPJ11
A boat can travel 4 m/s in still water. With what speed, relative to the shore, does it move in a river that is flowing 1 m/s if the boat is headed upstream?
(a) 1.5 m/s
(b) 3.0 m/s
(c) 4.5 m/s
(d) 5.0 m/s
The speed of the boat relative to the shore while moving upstream is 3.0 m/s.
To find the speed of the boat relative to the shore while moving upstream, we need to consider the speed of the boat in still water and the speed of the river flow.
Step 1: Identify the boat's speed in still water, which is 4 m/s.
Step 2: Identify the speed of the river flow, which is 1 m/s.
Step 3: Since the boat is moving upstream (against the river flow), we subtract the river's speed from the boat's speed in still water: 4 m/s - 1 m/s = 3 m/s.
So, the speed of the boat relative to the shore while moving upstream is 3.0 m/s. Your answer is (b) 3.0 m/s.
learn more about speed Refer: https://brainly.com/question/30462853
#SPJ11